Related
Hi guys,
Does anybody know of a great anti-fingerprint screen protector for my precious Omnia 7? If SGP had one, I would buy that one immediately (have one for my iPad and iPod Touch), but they don't have it (yet).
Any alternatives? Preciate the input!
Seriously guys, nobody? I think I'm certainly not the only one looking for this?
I have bought one from expansis Martin Fields Screen Protector
at h**p://w w w.expansys.it/martin-fields-screen-protector-samsung-omnia-7-1-pack-205497/
It's a Japan product, for me very good.
It's can cover also rear camera but photos are less good (little fade).
The other good brand is disagu at h**p://w w w.disagu.co.uk but doesn't have a specific product for samsung omnia 7.
Thanks nfalco79, for your input! I'll check those out.
nfalco79 said:
The other good brand is disagu at h**p://w w w.disagu.co.uk but doesn't have a specific product for samsung omnia 7.
Click to expand...
Click to collapse
Now is available at disagu the screen protector for Omnia 7 and I have ordered one as backup the current (martin). Unfortunately the product has wrong sizes, is 2mm height and 1 mm width too small.
Keep away.
Have a look:
h**p://img208.imageshack.us/img208/9818/p1010372a.jpg
h**p://img413.imageshack.us/img413/1428/p1010371i.jpg
h**p://img593.imageshack.us/img593/6731/p1010370s.jpg
nfalco79 said:
Now is available at disagu the screen protector for Omnia 7 and I have ordered one as backup the current (martin). Unfortunately the product has wrong sizes, is 2mm height and 1 mm width too small.
Keep away.
Have a look:
h**p://img208.imageshack.us/img208/9818/p1010372a.jpg
h**p://img413.imageshack.us/img413/1428/p1010371i.jpg
h**p://img593.imageshack.us/img593/6731/p1010370s.jpg
Click to expand...
Click to collapse
hahaha
You put the screen protector reverse side.....in the last picture is visible the cut for sensor that is in wrong place, it must be at the right side of speaker....
And also you have installed the film in very bad way....i have the same and is perfect....
marko68 said:
You put the screen protector reverse side.....in the last picture is visible the cut for sensor that is in wrong place, it must be at the right side of speaker....
And also you have installed the film in very bad way....
Click to expand...
Click to collapse
You don't understand, I have not apply film. I have only place disagu film over the current (as describe in my previous post) to see real gaps. I align film to the bottom right.
Doesn't matter was on reverse side, I simply use the side that stay closer to the screen without apply it to take photos.
If I center it on the hole for the start button or microphone, it would leaves all around a > 0.5 mm about from border and was not plain the real gap.
I have wrote a week ago to disagu, and they send me new one yesterday.
I attent the new one to see if was corrected the master template.
marko68 said:
i have the same and is perfect....
Click to expand...
Click to collapse
Can you post a photo?
Disagu replace screen protector arrived yesterday. Now has right dimensions but holes for microphone and start button are not covered well, very too large.
Sample:
http://img856.imageshack.us/i/p1010375.jpg/
http://img39.imageshack.us/i/p1010374d.jpg/
Martin Field for Omnia 7 in my opinion is the best.
I mean why do these companies make these covers that never fit?
Its just damn annoying
Check out Protectionfilms24.com (Vikuiti), the fit is perfect, no bubbles and it went on easy, I have a standard one but I am pretty sure they do an anti fingerprint one as well. Its a little pricey but worth it imo.
CONTACTMC said:
Check out Protectionfilms24.com (Vikuiti), the fit is perfect, no bubbles and it went on easy, I have a standard one but I am pretty sure they do an anti fingerprint one as well. Its a little pricey but worth it imo.
Click to expand...
Click to collapse
Mine arrived today , i'll fit it shortly and report back
* Easy to fit and does the job
what do you think abount Brando UltraClear Screen Protector?
Did anybody try the Invisible Shield from Zagg? Very curious about that one...
i owned Invisible Shield and Skinomi screen protectors.
Invisible Shield was not totally transparent and fit, and it was sticky.(i refunded)
Skinomi get marks easily.(I want to refund as well, but the return policy are haze.)
My experience, i love Zagg more than Skinomi.
I bought this Case Logic pouch 12 hours ago since i am in desperate need of a "temporary" case/pouch for my beloved tab+. Temporary since i'm waiting for better accessories for our tab+ (folio cases and other cases for the original tab just won't fit to ourtab+). But this Case Logic pouch looks just so professional and simple that i might decide to make it "permanent". I don't know what kind of filling was used to make the foam, but it sure feels secured enough to save the tab from dropping. I was informed that this pouch is also temperature smart. I don't know what that means. Anyways, the outer texture feels great too. Btw, it costs 599 pesos (14 USD or 11 EUR). The photos were taken with my tab+.
diospada11 said:
I bought this Case Logic pouch 12 hours ago since i am in desperate need of a "temporary" case/pouch for my beloved tab+. Temporary since i'm waiting for better accessories for our tab+ (folio cases and other cases for the original tab just won't fit to ourtab+). But this Case Logic pouch looks just so professional and simple that i might decide to make it "permanent". I don't know what kind of filling was used to make the foam, but it sure feels secured enough to save the tab from dropping. I was informed that this pouch is also temperature smart. I don't know what that means. Anyways, the outer texture feels great too. Btw, it costs 599 pesos (14 USD or 11 EUR). The photos were taken with my tab+.
Click to expand...
Click to collapse
i just got my 7.0plus tab yesterday and unfortunately i cant find any cases exactly made for the samsung p6200.. also no luck for the screen protector.
i got a foam cheap pouch for 2 USD at an everything 2 dollars shop and a screen protector for also 2 USD for the old galaxy tab.. just did some mod on the earpiece and sensor. so far still waiting for P6200 casings to popup here in the Philippines..
aperture said:
i just got my 7.0plus tab yesterday and unfortunately i cant find any cases exactly made for the samsung p6200.. also no luck for the screen protector.
i got a foam cheap pouch for 2 USD at an everything 2 dollars shop and a screen protector for also 2 USD for the old galaxy tab.. just did some mod on the earpiece and sensor. so far still waiting for P6200 casings to popup here in the Philippines..
Click to expand...
Click to collapse
wow that's a good buy for a total of 4 USD or roughly 200 pesos. I hope screen protectors and folio types for our tab+ be released already.
@diospada11
maybe you're interested with this case.. i got it at parksquare makati this morning..
this is the only case they have.. the have a matte screen protector.
Php450 for the case
Php250 for the matte screen protector.
@aperture that looks nice! i will have to find out how to go to parksquare from las pinas. anyways, is the screen protector properly fit on the tab+? how about the cut for the earpiece and camera?
i tried looking for the "right" screen guard all over our area (town center, south mall, puregold jr., festival), but they still don't have the proper screen guard for the tab+. however, it's so weird that they already have the ones for the 7.7. which btw, is still not yet officially released anywhere.
diospada11 said:
@aperture that looks nice! i will have to find out how to go to parksquare from las pinas. anyways, is the screen protector properly fit on the tab+? how about the cut for the earpiece and camera?
i tried looking for the "right" screen guard all over our area (town center, south mall, puregold jr., festival), but they still don't have the proper screen guard for the tab+. however, it's so weird that they already have the ones for the 7.7. which btw, is still not yet officially released anywhere.
Click to expand...
Click to collapse
yup the screen guard fits perfectly. there are cut holes for the sensor(right next to the earpiece), earpiece and camera.. it's really made for the tab+.
P450 for the case!?? not bad. i wonder if i'll see something like that on eBay. oh wait. would you mind telling me the exact store/booth where you got it? i have someone flying there on saturday maybe i could ask her to get it for me. and hows the build quality of that case? tnx
khel26 said:
P450 for the case!?? not bad. i wonder if i'll see something like that on eBay. oh wait. would you mind telling me the exact store/booth where you got it? i have someone flying there on saturday maybe i could ask her to get it for me. and hows the build quality of that case? tnx
Click to expand...
Click to collapse
quality is quite okay for its price. im surprised how it fits well with my P6200..
what i like about this case it that its slim and not that bulky..
you can try checking this site for more details of the case.. http://bit.ly/uLJLOa
inside parksquare there's a flock of cellfone stalls in the middle. the cellphone stall is adjacent to a small BPI stall with an ATM machine and just right beside a charcoal and painting stall.
hello everybody, some days ago my nexus s fall down and the glass has broken. everything works touch lcd etc, but is too broken and i have to replace it. i asked to a technique, he only found the screen+glass piece, but is about 100 € it don't worth it ...
is it possible to change the glass only ??? where can i find a cheap broken nexus to take the glass or the screen+ghlass to replace it on mine ???
i don't want to abandon my nexus s
Ebay.com for $20-$40 for both digitizer and LCD. It's cheap.
Sent from my P5100 Samsung Galaxy Note 8
dr.faramroze said:
Ebay.com for $20-$40 for both digitizer and LCD. It's cheap.
Sent from my P5100 Samsung Galaxy Note 8
Click to expand...
Click to collapse
i can't find anything at less then 50 € delivered from china Oo
Hi. I cracked the glass on my S4, and cant seem to find any replacement parts on the internet which are original.
Is it at all possible to get an original screen glass, and if not - Where would be the smartest to buy an non-original if considering quality?
fcknghst said:
Hi. I cracked the glass on my S4, and cant seem to find any replacement parts on the internet which are original.
Is it at all possible to get an original screen glass, and if not - Where would be the smartest to buy an non-original if considering quality?
Click to expand...
Click to collapse
My kid cracked his phone as well. Went to this lil kiosk in the mall and they cost like 150 to fix. Better off going thru the asurion to get a new phone.
I'm also interested, there's no way to find any information of the screen quality on the Internet as far as I can see.
I'd like just the glass as the phone works well, don't mind trying to replace it with tutorials available.
A friend of mine actually broke his screen and found a place to buy a replacement. He has the Sprint variant... I doubt they're not compatible... I'll ask him and see what I can find!
I have replaced a glass (on a separate phone) and glass+digitizer both purchased from etradesupply dot com. Their stuff seems to be legit OEM. I recommend them.
vinniej said:
I have replaced a glass (on a separate phone) and glass+digitizer both purchased from etradesupply dot com. Their stuff seems to be legit OEM. I recommend them.
Click to expand...
Click to collapse
Ah, I was wrong, he literally only needed the outside glass so.... that's why it was so cheap. Sorry!
But that site looks like they have legit stuff.
At SSC very Expensive
fcknghst said:
Hi. I cracked the glass on my S4, and cant seem to find any replacement parts on the internet which are original.
Is it at all possible to get an original screen glass, and if not - Where would be the smartest to buy an non-original if considering quality?
Click to expand...
Click to collapse
You can buy from witrigs.com. I heard it from other members who bought the replacement parts of Sony Xperia Z1 from here. It seems not bad.
vinniej said:
I have replaced a glass (on a separate phone) and glass+digitizer both purchased from etradesupply dot com. Their stuff seems to be legit OEM. I recommend them.
Click to expand...
Click to collapse
Thanks! I ordered from there (with OEM clear LCD adhesive and tools), it seems legit OEM indeed
Jul84 said:
Thanks! I ordered from there (with OEM clear LCD adhesive and tools), it seems legit OEM indeed
Click to expand...
Click to collapse
Good luck. If you are doing just the glass, just remember to take your time. The adhesive on the OEM glass is quite a pain to remove but it can be done without damaging the digitizer. Slow and steady! :good:
I replaced my severely cracked screen with a $6 replacement off ebay. Slooooow, steady process to remove the original screen being stuck to the digitizer with a clear adhesive. There are several videos on youtube to demonstrate the process. The new one works fine, although it is a little more reflective than the original. The touchscreen works well, but perhaps slightly less sensitive than before. A nice touch of the new screen is that the Back & Menu buttons are now blue, which looks good and is less bright than it used to be, which is an upgrade, to me. I'd say it leaves the phone about 95% as good as as it was before I dropped it. To me, well worth it to save $170 to extend the life of the phone until the S6 or S5 Prime or LG G3 or whatever phone is a big enough upgrade to make me jump. I did have a Note 3 for 9 days and it was epic, noticeably better than the S4 in pretty much every aspect, except that it was simply too big to deal with on a daily basis. But it did give me a nice dose of the level of performance I can look forward to with my next phone.
I also broke my glass few days ago and was thinking with replacing it with the new black edition glass that has no texture, just pure black. Does anyone know where I would be able to get my hands on that glass?
Thanks in advance!
Sent from my GT-I9505 using XDA Premium 4 mobile app
Thumbstarrepair.com fixed my wife's busted screen on her S4 for $58. Looks like a brand new phone.
DieselDawg
vinniej said:
Good luck. If you are doing just the glass, just remember to take your time. The adhesive on the OEM glass is quite a pain to remove but it can be done without damaging the digitizer. Slow and steady! :good:
Click to expand...
Click to collapse
If you don't want to mess with the adhesive buy the screen with the frame included. It's more expensive but much easier to replace and keep the phone in perfect condition.
---------- Post added at 11:17 AM ---------- Previous post was at 11:10 AM ----------
fcknghst said:
Hi. I cracked the glass on my S4, and cant seem to find any replacement parts on the internet which are original. Check that is compatible for your version, and that it's not for s4 mini or zoom versions either.
Is it at all possible to get an original screen glass, and if not - Where would be the smartest to buy an non-original if considering quality?
Click to expand...
Click to collapse
Search eBay for "galaxy s4 screen frame genuine", at least if they send you a counterfeit item you can open a Paypal dispute for selling fake items.
You can buy the screen with the frame or not. I always buy with the frame.
Here's an example of the screen+digitizer (no frame), 132$
Genuine Samsung Galaxy S4 i9500 i9505 i337 M919 LCD Screen+Digitizer Touch Glass
Screen+digitizer+frame, 217$
Details about Samsung Galaxy S4 i9505 4G LTE Black Screen LCD Glass on Frame *GENUINE SAMSUNG*
The screen & digitizer will fit any S4 variant. But if you're buying one with the FRAME as well, there are 4 to choose from.
i9505 - fits i9505 ONLY
i9500 - fits i9500 ONLY
i545 - fits L720 & R970 also
i337 - fits M919 and i9505G also
I had mine done by a guy on Ebay.
http://www.ebay.com/usr/thumbstar?_trksid=p3984.m1439.l2754
Cost be about 65 bucks shipped. He uses the LOCA glue method (OEM style), not the double sided tape like most of the retail stores do. Sent it off and had it back within a few days. I just sent him my phone w/o battery and cover. Came back perfect in my opinion.
my local sprint store was going to repair my damaged LCD for $75... included new glass
Hello Everyone..
Just like you all I too was sad that P2 had bubbles in the corners.
I finally found got a workaround so wanted to share my experience.
The solution for me was to buy a tempered glass with "6H" hardness instead of the regular "9H" ones.
These are slightly flexible and hence do not form bubbles in the crners where the screen is bent.
I bought "JMM Flexible Tempered Glass Screen Protector for Lenovo P2" from Amazon India.
I dont know if we're allowed to post links here. If yes let me know and I'll post the link.
Thanks...Hope this helps. Enjoy the P2
Yes please...
But then 6H is really not tempered glass is it? It's more of a plastic AFAIK
Siva Mk said:
Yes please...
But then 6H is really not tempered glass is it? It's more of a plastic AFAIK
Click to expand...
Click to collapse
Here is the link:
https://www.amazon.in/gp/product/B071LG88CW/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
There are other Flexible Tempered glasses too on Amazon.
Its not as flexible as they show in images...Almost like glass (dont know exactly what material)
Once on the phone it looks just like tempered glass...plus all the tempered glass features like olephobic coating etc etc...
Thanks! I've placed an order. Will review it once it arrives
A workaround that is claimed to work is to put the tempered glass screen protector (even one which is 9H) on top of one of the PET sort (maybe because PET is both flexible and cheap?). https://forums.lenovo.com/t5/forums...sage-id/3761/print-single-message/true/page/1
davidnotcoulthard said:
A workaround that is claimed to work is to put the tempered glass screen protector (even one which is 9H) on top of one of the PET sort (maybe because PET is both flaxible and cheap?). https://forums.lenovo.com/t5/forums...sage-id/3761/print-single-message/true/page/1
Click to expand...
Click to collapse
Honestly I would not suggest 2 screen guards one over the other.
Specially when one layer is the regular screen guard which is not so clear...Having 2 will surely affect display quality and may impact touch response.
However if you do try it let us know the results.
Thanks
Siva Mk said:
Thanks! I've placed an order. Will review it once it arrives
Click to expand...
Click to collapse
Did it arrive ?
What are your thoughts ?
It arrived, I'm out of town so couldn't try it on yet.. haven't opened the box either :silly:
Siva Mk said:
It arrived, I'm out of town so couldn't try it on yet.. haven't opened the box either :silly:
Click to expand...
Click to collapse
Update1: tried it on sticks on perfectly fine at the bend areas, thanks to @sammys3
However, the sides come of if not stuck properly. It's easy to apply though. Small mis alignment may place the protector to the curved edges and won't stick.
Will keep this on for sometime and see. Will update after a week of usage.
Overall pretty happy with it. I'd recommend it
Pics attached
Lenovo P2 temperd glass
Hey its a nice found ,but the tempered glass is a slightly blue tilted one.the display of the screend changed after keepin it ? Any alternative?
Does that tempered glass fits fully til the corner of edge of the screen
I bought the omoton one which covers everything.. its just perfect!
alese13 said:
I bought the omoton one which covers everything.. its just perfect!
Click to expand...
Click to collapse
Please post the link
This one I guess: https://www.amazon.co.uk/OMOTON-Len...d=1509293091&sr=8-1&keywords=omoton+lenovo+p2
But since you're in india, I don't see any way for you to get your hands on one, amazon.in don't sell these.
Be careful however, it may work for some, but for me it didn't. See here: https://www.amazon.de/product-revie...UTF8&filterByStar=three_star&showViewpoints=0
The bending of the screen caused these white air-bubbles to occur at the sides. While not being as terrible as the bog-standard tempered glass screen protectors, it was still too bad for me, so I'll just stick to plastic protectors.
Oh, and the work around posted here: Didn't work for me either. The tempered glass protector just pulled the plastic one up, so I still had air-bubbles. Well, it was worth a try ^^
Get the clear filler....
thm01 said:
...
Oh, and the work around posted here: Didn't work for me either. The tempered glass protector just pulled the plastic one up, so i still had air-bubbles. Well, it was worth a try ^^
Click to expand...
Click to collapse
kirtikhurana said:
Guys why are you buying these fake packed costly Rs.300-400 screen guard from flipkart or amazon.in , I've been to Gaffar Market, Delhi where they're selling from just Rs. 10 - Rs 25 but you've to buy 5-10 piece, they don't give 1-2 piece only.
ask them for Samsung J7 pro screen guards it'll perfectly fit on P2
.
You can even get your broken screen repaired for 2000-3000 Rs.
Click to expand...
Click to collapse
Strange thing, not everyone lives in Delhi and the cost of travel may outweigh the price in the market
is not lenovo p2 already using gorilla glass? I think it seems better like that without protector. because it looks more natural right?
kirtikhurana said:
Guys why are you buying these fake packed costly Rs.300-400 screen guard from flipkart or amazon.in , I've been to Gaffar Market, Delhi where they're selling from just Rs. 10 - Rs 25 but you've to buy 5-10 piece, they don't give 1-2 piece only.
ask them for Samsung J7 pro screen guards it'll perfectly fit on P2
.
You can even get your broken screen repaired for 2000-3000 Rs.
Click to expand...
Click to collapse
I just got my screen glass few cracks in it, I just want the screen glass only [gorilla glass only] is it is available there? What will be the price range?
Or I should buy the complete set for replacement? Super amoled display for 2-3k? I don't want cheap lcd display replaced. Your answers will be helpful...
kirtikhurana said:
Led screen could be used from any Samsung phone like J7 pro or similar size which can be used in the existing touch panel of P2 but if you also broke touch digitizer then you have to replace whole folder(including the front panel) which has to be of only P2 if front panel is available in market or P1(maybe) can be fit.
If you led screen panel is intact than no need to replace while folder but repair shops install whole folder because extracting led screen from touch panel may broke it also.
There even iPhones folder won't cost more than 3500 but main issue is the availability of front panel of P2.
if you want repair shop phone number. I'll give you.
Click to expand...
Click to collapse
send it to me in a Pm, thanks for the info.