i was flash new firmware using sp flash tool and the laptop stopped at the process of flashing and now the tab wont power or recognized by windows and nothing happen when press power and volume down what is the solution i tried to reinstall all vcom mtk drivers and use another laptop and cant make windows recognize the tap>> sorry of my bad English "ps non removable battery"
mustafaalweshahi said:
i was flash new firmware using sp flash tool and the laptop stopped at the process of flashing and now the tab wont power or recognized by windows and nothing happen when press power and volume down what is the solution i tried to reinstall all vcom mtk drivers and use another laptop and cant make windows recognize the tap>> sorry of my bad English "ps non removable battery"
Click to expand...
Click to collapse
Hi, thank you for using XDA assist.
There is a general forum for android here*http://forum.xda-developers.com/android/help*where you can get better help and support if you try to ask over there.*
Good luck.
Related
Hello! Im new here
The thing is that I bought a bricked OPO today hoping that I could fix it. I've been like 4-5hrs straight trying and nothing!
The real problem is that my OPO is not being recognized by my computer. (Im running Windows 8.1)
When I connect it to the PC the device vibrates but no sound, I go to device manager and it's not there (not as QHSUSB_BULK, not as UNKNOWN DEVICE, not as nothing, it just dont exist)
I installed the Samsung drivers, OnePlusRestoreTool, Bacon Root ToolKit, OnePlus One Toolkit and nothing seem to work...
I tried to get it into FastBoot mode but it ony vibrates every 10 consecutive seconds I hold the vol up + pwr button and NOTHING happen, screen remain black and no sound by my PC recognizing the device...
I tried alternate USB, alternate cable and nothing...
If you guys can help me that would be awesome!
Thanks, and sorry for my bad english.
Maximuseml said:
Hello! Im new here
The thing is that I bought a bricked OPO today hoping that I could fix it. I've been like 4-5hrs straight trying and nothing!
The real problem is that my OPO is not being recognized by my computer. (Im running Windows 8.1)
When I connect it to the PC the device vibrates but no sound, I go to device manager and it's not there (not as QHSUSB_BULK, not as UNKNOWN DEVICE, not as nothing, it just dont exist)
I installed the Samsung drivers, OnePlusRestoreTool, Bacon Root ToolKit, OnePlus One Toolkit and nothing seem to work...
I tried to get it into FastBoot mode but it ony vibrates every 10 consecutive seconds I hold the vol up + pwr button and NOTHING happen, screen remain black and no sound by my PC recognizing the device...
I tried alternate USB, alternate cable and nothing...
If you guys can help me that would be awesome!
Thanks, and sorry for my bad english.
Click to expand...
Click to collapse
Hi mate, am in exact same situation as yours.
Did you have any luck fixing it?
Maximuseml said:
Hello! Im new here
The thing is that I bought a bricked OPO today hoping that I could fix it. I've been like 4-5hrs straight trying and nothing!
The real problem is that my OPO is not being recognized by my computer. (Im running Windows 8.1)
When I connect it to the PC the device vibrates but no sound, I go to device manager and it's not there (not as QHSUSB_BULK, not as UNKNOWN DEVICE, not as nothing, it just dont exist)
I installed the Samsung drivers, OnePlusRestoreTool, Bacon Root ToolKit, OnePlus One Toolkit and nothing seem to work...
I tried to get it into FastBoot mode but it ony vibrates every 10 consecutive seconds I hold the vol up + pwr button and NOTHING happen, screen remain black and no sound by my PC recognizing the device...
I tried alternate USB, alternate cable and nothing...
If you guys can help me that would be awesome!
Thanks, and sorry for my bad english.
Click to expand...
Click to collapse
1st of all uninstall QHSUSB_BULK this driver,after this download qualcomm 9008 driver google it and install this driver then you can connect your #bacon it going to detected and dont forgot this process has to be done test mode and refer thia thread also http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
sid_844 said:
1st of all uninstall QHSUSB_BULK this driver,after this download qualcomm 9008 driver google it and install this driver then you can connect your #bacon it going to detected and dont forgot this process has to be done test mode and refer thia thread also http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
First of all thanks for your reply.
I have seen this thread but as you can see to uninstall the old driver I need to:
' Go to Device Manager, right click on the bricked USB device (QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008) and go to Properties, click on Driver, then select Uninstall. Check the box to remove driver files, if prompted...'
But the device is not seen by the device manager.
Someone suggested in an other thread that I need just to press (not hold) power + volume button.
I will try that and let you know.
By the way what is 'test mode'?
I tried to downgrade the kitkat version because I couldn't update my apps, using a flash tool.
It then shut down and now does not turn on at all. When I plug into the computer the USB gets into a cycle/loop of connect and disconnect. Please help me if you have the time.
lenover9000 said:
I tried to downgrade the kitkat version because I couldn't update my apps, using a flash tool.
It then shut down and now does not turn on at all. When I plug into the computer the USB gets into a cycle/loop of connect and disconnect. Please help me if you have the time.
Click to expand...
Click to collapse
Does it vibrates or display anything?
Tyaginator said:
Does it vibrates or display anything?
Click to expand...
Click to collapse
no. But I think it goes on '''META MODE'" ONLY on the computer for a few seconds.
Thanks for commenting.
Check device manager in your pc when you connect your phone, is it showing MTK 65xx preloader
Tyaginator said:
Check device manager in your pc when you connect your phone, is it showing MTK 65xx preloader
Click to expand...
Click to collapse
It shows Mediatek preloader usb vcom port (com7) alternating with mtk usb port (com6).
lenover9000 said:
It shows Mediatek preloader usb vcom port (com7) alternating with mtk usb port (com6).
Click to expand...
Click to collapse
U must have flashed some other device's firmware and which guide u have followed
Tyaginator said:
U must have flashed some other device's firmware and which guide u have followed
Click to expand...
Click to collapse
I used this one.
forums (dot) lenovo (dot) com/t5/A-and-P-Series/Lenovo-A536-stuck-during-firmware-upgrade/td-p/1744571[/url]
I downloaded the latest firmware from
"THIS is the latest original ROW firmware (PC Flash Tool installation)"
This whole guide was fine, it worked for me.
But the problem was when I tried to downgrade the firmware to an older version.
I tried to replace the lastest official firmware with this one ROM Android 4.4.2 (older official needrom(dot)com/download/lenovo-a536/
sorry can't link websites yet
http://forum.xda-developers.com/showthread.php?t=1943442
Try this thread
Tyaginator said:
http://forum.xda-developers.com/showthread.php?t=1943442
Try this thread
Click to expand...
Click to collapse
Thank you so much for staying with me to solve this problem. The phone is fixed.
I followed the
"
For MT6575/ 77
With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds...Typically, you need to click Download at SP Flash Tool before entering META mode or it will auto disconnected...
"
except I downloaded the lenovo a536 stock rom.
the only thing I did different was that I plugged in (META MODE) and THEN pressed download or else the usb would never be detected (they both show different COM numerals.)
After that I firmly held the whole usb into the phone during the whole flashing, or else it might get automatically disconnected again.
Then I updated/upgraded to the latest firmware, And it is all optimal. :good:
THANKS AGAIN !!!
lenover9000 said:
Thank you so much for staying with me to solve this problem. The phone is fixed.
I followed the
"
For MT6575/ 77
With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds...Typically, you need to click Download at SP Flash Tool before entering META mode or it will auto disconnected...
"
except I downloaded the lenovo a536 stock rom.
the only thing I did different was that I plugged in (META MODE) and THEN pressed download or else the usb would never be detected (they both show different COM numerals.)
After that I firmly held the whole usb into the phone during the whole flashing, or else it might get automatically disconnected again.
Then I updated/upgraded to the latest firmware, And it is all optimal. :good:
THANKS AGAIN !!!
Click to expand...
Click to collapse
Glad it's fixed
I Too Need help my lenovo a536 is bricked
My phone is not booting , unable to install USB VCOM Drivers and it is constantly going off while installing and unable to install driver ,phone vibrates shows logo but it goes in bootloop pls help urgent:crying:
prathamsd4 said:
My phone is not booting , unable to install USB VCOM Drivers and it is constantly going off while installing and unable to install driver ,phone vibrates shows logo but it goes in bootloop pls help urgent:crying:
Click to expand...
Click to collapse
What do u mean by "it is constantly going off while installing"
Does it boot in recovery mode? Please be as specific as you can while posting questions.
Sent from a Device using an App!
Tyaginator said:
What do u mean by "it is constantly going off while installing"
Does it boot in recovery mode? Please be as specific as you can while posting questions.
Sent from a Device using an App!
Click to expand...
Click to collapse
it does not boot in recovery mode,
while trying to install mediatek usb vcom drivers phone constantly connects and disconnect and i am unable to install drivers..
prathamsd4 said:
it does not boot in recovery mode,
while trying to install mediatek usb vcom drivers phone constantly connects and disconnect and i am unable to install drivers..
Click to expand...
Click to collapse
I don't think you need to connect phone during installing drivers and phone will stay connected after properly installing DA Vcom drivers
Sent from a Device using an App!
I have similar problem
Hi, please I need your help. I tried to flash stock ROM but I hard bricked my phone. When I connect phone with computer I'm holding volume up button. In device manager it shows "MediaTek USB Port (COM4)" but after three seconds it disconnect. This is why I can't flash ROM. It's everytime disconnect after three seconds.. Please help me.
Lenovo A536
Please help me guys, where is GND and COLO point of lenovo a536
same problem
i have a lenovo a536 and when i flash the stock
it goes to a cycle of off and on , help me to fix this
ive tried a lot of stock roms i searched,and none of them worked , the cycle of turning off and on is still there
i am trying to unbrick a thl w100s . i install the drivers for win 7 . the problem is when i connect the phone to pc i have continuously connect and disconect. so flash tool cant work.
how can i lock the connection between phone and pc?
thank you
bandi650 said:
i am trying to unbrick a thl w100s . i install the drivers for win 7 . the problem is when i connect the phone to pc i have continuously connect and disconect. so flash tool cant work.
how can i lock the connection between phone and pc?
thank you
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
I couldn't find your device so i suggest you to head over Android Q&A, Help & Troubleshooting"]here[/URL] in order to get better help.
Good luck!
Recently i tried flashing cwm recovery using sp flash tools. I followed an online tutorial which asked me to specifically download the boot. Img (patched) and recovery. Img, which was cwm. I insatlled all the drivers as asked then I turned off my device as asked and connected the device using usb cable after pressing the download button on sp flash tools. After a few seconds i saw the red line which is the starting of the flashing process, and then i received an error 'b_rom error" or something like that... I forgot, i dont have screenshot .
The phone is not responding since then, but when i connect the phone to my laptop the phone is recognised as 'mediatek da com port' but this driver doesnt work if i want to flash the stock rom using the sp flash tools, the internet says that i need the 'mediatek preloader driver' which is supposed to appear for 2 seconds in the device manager section and dissapear, but alas this doesnt appear in my case, and i guess this is really important for flashing the stock rom using sp flash tools. I tried many ways to install the mtk preloader driver but even of it installs it is not compatible with my device. I cant find this driver and hence i cant bring my phone back from the dead
If any member could help me here i would be really thankful , i have the stock rom downloaded and all the drivers as asked in various tutorials so i am helpless now. Please someone respond to this thread...
My device is xolo 8x 1000i with mediatek 6592 octacore chip.
Thankx ahead
ron2yee said:
Recently i tried flashing cwm recovery using sp flash tools. I followed an online tutorial which asked me to specifically download the boot. Img (patched) and recovery. Img, which was cwm. I insatlled all the drivers as asked then I turned off my device as asked and connected the device using usb cable after pressing the download button on sp flash tools. After a few seconds i saw the red line which is the starting of the flashing process, and then i received an error 'b_rom error" or something like that... I forgot, i dont have screenshot .
The phone is not responding since then, but when i connect the phone to my laptop the phone is recognised as 'mediatek da com port' but this driver doesnt work if i want to flash the stock rom using the sp flash tools, the internet says that i need the 'mediatek preloader driver' which is supposed to appear for 2 seconds in the device manager section and dissapear, but alas this doesnt appear in my case, and i guess this is really important for flashing the stock rom using sp flash tools. I tried many ways to install the mtk preloader driver but even of it installs it is not compatible with my device. I cant find this driver and hence i cant bring my phone back from the dead
If any member could help me here i would be really thankful , i have the stock rom downloaded and all the drivers as asked in various tutorials so i am helpless now. Please someone respond to this thread...
My device is xolo 8x 1000i with mediatek 6592 octacore chip.
Thankx ahead
Click to expand...
Click to collapse
If you can see DA VCOM port when u connect the phone that means there is no need of mtk preloader to appear. You can try flashing the stock firmware.
If you really want to see mtk preloader 65xx, then right click on DA vcom port and click uninstall drivers. Then you will see mtk preloader 65xx for 2 seconds everytime you connect the phone.
Gud luck
Sent from my Android One
Tyaginator said:
If you can see DA VCOM port when u connect the phone that means there is need of mtk preloader to appear. You can try flashing the stock firmware.
If you really want to see mtk preloader 65xx, then right click on DA vcom port and click uninstall drivers. Then you will see mtk preloader 65xx for 2 seconds everytime you connect the phone.
Gud luck
Sent from my Android One
Click to expand...
Click to collapse
first of all thankx for your swift reply
and coming to the driver part.. i tried uninstalling the da drivers but it reverted to someother driver nit mtk preloader it had a different name.... whatsoever
and finally... my device is up and running its a miracle.... i kept it for a whole day and later i plugged in the charger and viola the phone was discharged and it started charging
also i have another problem with which i ll start a thread.. do keep an eye out please sir
thankx again [emoji4] [emoji4] [emoji4]
Sent from my 8x-1000i using Tapatalk
hello guys, i have a problem with my lenovo A850i.
after flashing, my phone cannot on, i check my battery and its still in good condition, i try to flashing one again using SP flash tool, and now my phone were not detect by pc, the led will light up when i remove the battery when it connect to usb, but when i put back the battery,the light will close. i connect to usb and try mane button combination , but still not work...
i have been stuck with this about 3 day, i hope someone can help me..
Sorry for my broken englosh...
What did you flash exactly? You sure you flashed something that's specifically made for your phone ?
Also what combination have you tried yet.
Download another stock rom for your phone load scatter text ,click download and connect your phone to PC via USB while holding the vol+button only
northwindtrades said:
What did you flash exactly? You sure you flashed something that's specifically made for your phone ?
Also what combination have you tried yet.
Download another stock rom for your phone load scatter text ,click download and connect your phone to PC via USB while holding the vol+button only
Click to expand...
Click to collapse
Yes sir, im very sure that i flash lenovo A850i firmware, do u have any other combination for me to try to make my phone connected to pc, i have try holding vol+ button while connect to pc via usb, but it not work, all i have now just a red led light that turn on without battery
jimbo94 said:
Yes sir, im very sure that i flash lenovo A850i firmware, do u have any other combination for me to try to make my phone connected to pc, i have try holding vol+ button while connect to pc via usb, but it not work, all i have now just a red led light that turn on without battery
Click to expand...
Click to collapse
Meta mode( usually vol+ button) is the most successful way of of recovering from a hardbrick for lenovo but after looking up your device you guys coonect meta mode dffrntly.now this is the most successful way of unbricking your phone
pick the official ROM for A850i came with A850_203 multilanguage firmware.
You'll need MTK 65XX metamode driver – USB VCOM Preloader driver, if you previously installed then there is no need.
SP Flash Tool to download the firmware to the phone.
(Make sure you have a working version as some so tool don't work as they're supposed to into ,I'm using version 5.1)
Run SP-Flash Tool, map the scatter loading MTK6582 for your firmware, normally inside the firmware folder. It will mapped the necessary file and partition for your device, After that click Download and leave it searching for device, it will start flash when found the device,
so next we need to activate back the dead phone of Meta mode USB Vcom MTK65xx , firstly remove the battery, simply press and hold VOLUME UP & DOWN + Power Button simultaneously while reinsert USB that connect the phone to PC.
The previous SP Flash that searching for device will start the download process just after the META mode activated, if you failed then try repeat the step :fingers-crossed:
And hit the thumps up button if this post has been helpfull good luck:good:
northwindtrades said:
Meta mode( usually vol+ button) is the most successful way of of recovering from a hardbrick for lenovo but after looking up your device you guys coonect meta mode dffrntly.now this is the most successful way of unbricking your phone
pick the official ROM for A850i came with A850_203 multilanguage firmware.
You'll need MTK 65XX metamode driver – USB VCOM Preloader driver, if you previously installed then there is no need.
SP Flash Tool to download the firmware to the phone.
(Make sure you have a working version as some so tool don't work as they're supposed to into ,I'm using version 5.1)
Run SP-Flash Tool, map the scatter loading MTK6582 for your firmware, normally inside the firmware folder. It will mapped the necessary file and partition for your device, After that click Download and leave it searching for device, it will start flash when found the device,
so next we need to activate back the dead phone of Meta mode USB Vcom MTK65xx , firstly remove the battery, simply press and hold VOLUME UP & DOWN + Power Button simultaneously while reinsert USB that connect the phone to PC.
The previous SP Flash that searching for device will start the download process just after the META mode activated, if you failed then try repeat the step :fingers-crossed:
And hit the thumps up button if this post has been helpfull good luck:good:
Click to expand...
Click to collapse
Okay, i will try it first