Hello friends I'm in big trouble because I did flash a rom wrong for the oppo R8007 or R1S. I have this phone from China but I'm Italian and I can not send him to assistance. I can not go into recovery or fastboot mode. The phone has a black screen and no signs of life. The only thing that happens is that by connecting it to the Pc appears qhsusb_bulk. What can I do? "unbrik"exists a tool?It is a MSM8226 qualcomm. I have only the stock rom, is there a way to install it? There are tool for lg, moto g and for opo one but nothing for my phone. Can somebody help me?
Thank you.
MicOppo said:
Hello friends I'm in big trouble because I did flash a rom wrong for the oppo R8007 or R1S. I have this phone from China but I'm Italian and I can not send him to assistance. I can not go into recovery or fastboot mode. The phone has a black screen and no signs of life. The only thing that happens is that by connecting it to the Pc appears qhsusb_bulk. What can I do? "unbrik"exists a tool?It is a MSM8226 qualcomm. I have only the stock rom, is there a way to install it? There are tool for lg, moto g and for opo one but nothing for my phone. Can somebody help me?
Thank you.
Click to expand...
Click to collapse
I have another working Oppo R1S. Can I take some file from it ? Can I use qpst or other tool ? The snapdragon is the same of the moto g, I have found a tool to flash the singleimage.bin for unbrick moto g, but it don't work to mine phone. ( I think because this singleimage is only for moto g, but the tool apparently seems to work). Now I have also installed the qualcomm driver for my Oppo and the pc recognise it like Qdloader 9008. What can I do know?
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
adamfoulkes said:
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
Click to expand...
Click to collapse
I have the same problem, did you find a solution?
cheers
Hi
I'm in the same situation, someone has a solution
Help
Me 2.
Help pls.
:crying:
Does it turn on but gets stuck while boot or it doesn't turn on at all?
Sent from my GT-S7262 using Tapatalk
Tali099 said:
Does it turn on but gets stuck while boot or it doesn't turn on at all?
Sent from my GT-S7262 using Tapatalk
Click to expand...
Click to collapse
Hi Tali099 and sorry for my terrible English.
No boot log and only black screen.
Absolutely dead !!!
when connected to pc, find the mobile as: qhsusb_bulk qualcomm 9008 com5.
I had try to unbrick it but unfortunately i didn't find any way to unbrick the chipset: Qualcomm MSM8939 Snapdragon 615 who have the zte blade s6.
Very deep hard brick. :crying:
Have you any idea how to unbrick it ???
I'm the same situation that you.
gining said:
Hi Tali099 and sorry for my terrible English.
No boot log and only black screen.
Absolutely dead !!!
when connected to pc, find the mobile as: qhsusb_bulk qualcomm 9008 com5.
I had try to unbrick it but unfortunately i didn't find any way to unbrick the chipset: Qualcomm MSM8939 Snapdragon 615 who have the zte blade s6.
Very deep hard brick. :crying:
Have you any idea how to unbrick it ???
Click to expand...
Click to collapse
I'm the same situation that you. I need several files for unbrick our phone but I don't found it. I have follow this tutorial: htcmania.com/showthread.php?t=924041
jjcc1999 said:
I'm the same situation that you. I need several files for unbrick our phone but I don't found it. I have follow this tutorial: htcmania.com/showthread.php?t=924041
Click to expand...
Click to collapse
I tried and this way but the "color" was only finds the com port and nothing else. Searching, I found for the "color" is only for chipset Msm8974 and not for ours chipset msm8939. We must look to find the way for unbrick our chipset (msm8939). unfortunately nothing i found as now.
If I can not do anything in the next few days, i will defamation the ZTE in all forums because our problem started from the ZTE proposal to upgrade our mobile with the new version.
gining said:
I tried and this way but the "color" was only finds the com port and nothing else. Searching, I found for the "color" is only for chipset Msm8974 and not for ours chipset msm8939. We must look to find the way for unbrick our chipset (msm8939). unfortunately nothing i found as now.
If I can not do anything in the next few days, i will defamation the ZTE in all forums because our problem started from the ZTE proposal to upgrade our mobile with the new version.
Click to expand...
Click to collapse
I agree with you because the web does not put any warning that may happen or specification in this regard.
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
I have exactly the same situation after an official upgrade via SD card..
Black screen will not power on only shows blue light when connected to a charger or laptop.
I have been waiting for over two weeks now for ZTE to provide a solution, nothing, all I get is we are looking into it..
Terrible service and certainly won't be buying any ZTE again
Guys so we are really dead, there is nothing to be done about this problem ? Is this hard-brick ? Any solution here ????
same here
my phone brick after repartition this dump phone
i forget to search that file first..
Please help me s6 was brick [email protected]
reply from ZTE
Hello,
I have been backwards and forwards with ZTE to get this problem resoved and still not sorted. They did send me some instructions of how to reset the device but it needs a piece of software to be able to do this and ZTE won't give it to me to try it out!!!!
I would upload it on here but it seems I am not allowed to or cannot find out how to do it.
This is so frustating!
I got the same problem (black screen) when after rooting and different experiment I tried to put the original ROM back which I downloaded from needrom. After 3 days of continuous searching, I concluded that I have damaged the eMMC Partition by installing a different firmware that was not suitable for my Europe version of Mobile.
This link was quite helpful to understand the problem.
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
To solve this problem first I need the 8939_msimage.mbn of Qualcomm 615 and related files. The other option is to use the service ROM and ZTE TOOL STUDIO, I am unable to find this ROM and other files to repair bootloader. If someone with working ZTE blade s6 or other Qualcomm 615 chipset phone can provide this, it would be really helpful.
Following files are required at least from a Qualcomm 615 MSM8939 Chipset.
8939_msimage.mbn
MPRG8939.mbn
patch0.xml
sahara.xml
rawprogram0.xml
Hello all, I have the same problem with my phone except that when it boot , it freezes on " ZTE screen" . What can I do ?
magicfab38 said:
Hello all, I have the same problem with my phone except that when it boot , it freezes on " ZTE screen" . What can I do ?
Click to expand...
Click to collapse
You can enter recovery mode Power On pressing volume up key.
Try "wipe cache partion" at first and if S6 still doesn't boot up, try next "wipe data/factory reset".
If both measures doesn't work, your system has damage from unknown reason.What change did you it?
I have the same problem
:crying:
adamfoulkes said:
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
Click to expand...
Click to collapse
adamfoulkes said:
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
Click to expand...
Click to collapse
Did you find a solution ?
---------- Post added at 07:32 PM ---------- Previous post was at 07:17 PM ----------
safderali5 said:
I got the same problem (black screen) when after rooting and different experiment I tried to put the original ROM back which I downloaded from needrom. After 3 days of continuous searching, I concluded that I have damaged the eMMC Partition by installing a different firmware that was not suitable for my Europe version of Mobile.
This link was quite helpful to understand the problem.
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
To solve this problem first I need the 8939_msimage.mbn of Qualcomm 615 and related files. The other option is to use the service ROM and ZTE TOOL STUDIO, I am unable to find this ROM and other files to repair bootloader. If someone with working ZTE blade s6 or other Qualcomm 615 chipset phone can provide this, it would be really helpful.
Following files are required at least from a Qualcomm 615 MSM8939 Chipset.
8939_msimage.mbn
MPRG8939.mbn
patch0.xml
sahara.xml
rawprogram0.xml
Click to expand...
Click to collapse
Hi bro did you find a solution to unbrick the zte blade s6 ?
i bricked my phone i flashed a file over the bootloder i have TWRP Installed Please help i removed the OS And Bootloder
And now it just comes up with the ZTE Splash screen the turns off and Reapets please helppppppppppppppppppppppppppp meeeeeeeeeeeeeeeeeee video will come out soon
ChrisAndoidYT said:
i bricked my phone i flashed a file over the bootloder i have TWRP Installed Please help i removed the OS And Bootloder
And now it just comes up with the ZTE Splash screen the turns off and Reapets please helppppppppppppppppppppppppppp meeeeeeeeeeeeeeeeeee video will come out soon
Click to expand...
Click to collapse
Did you success to unbrick your phone?
Bricked ZTE Blade S6
Hi i have bricked my ZTE Blade S6 while trying to run official update. No its with a black screen and when i connect it to Laptop it detects as Qualcomm HS-USB QDLoader 9008 (COM3). Kindly help me to unbrick this
hello everybody
can anybody help me, please ?
I have an lg ls-665 updated to zv5
and i have flashed it with zv4
the device now dead and shows qloader 9008 in device manager
what can i do with it?
can i repair it without box?
please help me ....everybody
Please help me. My LG G4 vs986 got hard bricked , nothing happens when I press power button or combinations of power and volume keys , plz help me to unbrick it I try everything in internet but nothing helped , when I connect it to PC it gets detected as "RELINK HS-USB QDLoader 9008 , if I try to flash it using LG flash tool it says device disconnected . Plz help me with this
Ravi Shankar HY said:
Please help me. My LG G4 vs986 got hard bricked , nothing happens when I press power button or combinations of power and volume keys , plz help me to unbrick it I try everything in internet but nothing helped , when I connect it to PC it gets detected as "RELINK HS-USB QDLoader 9008 , if I try to flash it using LG flash tool it says device disconnected . Plz help me with this
Click to expand...
Click to collapse
Greetings and welcome to assist. It seems you are not the only person to have this issue, some members managed to fix it in this thread
https://forum.xda-developers.com/verizon-g4/help/vs986-hard-bricked-t3297170
Good Luck
Sawdoctor