Related
DISCLAIMER:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Hello Guys !
In this thread you will find my custom ROM And Recovery for the Wiko DarkMoon
Please be sure to read (and re-read) this carefully in order to avoid unnecessary questions.
Instructions and Frequently asked questions (FAQ):
For Instructions jump into post #2.
FAQ jump into post #3.
Wiko DarkMoon internal memory re-partition, jump into post #4.
How to Revert to the STOCK Rom / Recovery / Partition Layout, jump into post #4.
Recovery INFO
The salient features of Carliv Touch Recovery include:
Based on CWM 6.0.4.4
Full Touch Support
With features of Cannibal Open Touch
Aroma File Manager Support
Support for both Edify and Amend scripting allows flashing all ROMs
Touch screen button controls
Advanced Backup
Advanced Restore
Delete old backups
Persistent settings
User-defined backup locations
ADB Sideload
Update CTR v2.5 (30/07/2014)
Changelogs:
New Menu Layout
Tar + Gzip Backup Compression : ( "Backup/Restore" -> "Default Backup Format" )
Your Backups will be smaller now, just like on the old native CWM
Removed "wipe all" option from wipe menu ( if you need to wipe system, use "format system" from "mounts/storage")
Rearanged menu order in root menu to restore CWM order
There's now an "nvram backup/restore" menu in "carliv" section
The nvram partition will be backed up in clockworkmod/backup folder as nvram.img. This will help if you lose IMEI and other communication features. It will work only if you have the nvram partition of size 0x500000 (check your scatter) and if you have the nvram defined as /dev/nvram path in recovery.fstab. If the nvram partition is damaged (as in flashing an oversized recovery) this will not help you, and you need SPFlashTools to reflash with format your phone official firmware, and after that flash this recovery, boot in recovery and restore nvram.
some other small changes.
Changelogs
Android 4.2.2 (JB) Based custom ROM:
Changelog Build v1.0 (February 22 2014)
Based on official Android 4.2.2 ROM (WIKO DARKMOON Version 8)
Kernel 3.4.5
Custom Mods:
User customize-able installation based on AROMA installer
Pre-rooted with SuperSU (v1.93)
Debloated
Added BusyBox (v1.22.1 - Stericson)
Added Ad blocker (patched "host" file)
Ziplagned apks (better performance)
init.d support with performance scripts
Network, wifi, power saving, and several other tweeks
Updated APN's from CyanogenMOD repo
Added Performance Control (several CPU/System Mods)
Added in-built Xposed framework and Latest Gravity BOX module v2.9.7 (Several System Mods)
Acess To the Mediatek MTK Eng Mode
Added the following Android 4.4 KitKat Goodies:
Apps (Including Google Launcher - GEL, with Voice Search )
Bootanimation
QuickOffice
And other necessary system files
Kernel:
Insecure
Removed Mediatek debugger (mtk.aee.aed Daemon; etc)
USB Mass Storage as Default (instead of MTP)
GPL Compliance:Kernel 3.4.5
Github Kernel Repo
Downloads:Dev-Host
WIKO_DarkMoon_JB_4.2.2_Stable_v1.0.zip - 386.12 MB
Mod_extended_USRDATA_2.5GB.zip - 7.07 MB
MT65xx_USB_VCOM_drivers.zip - 403.65 KB
Wiko_Recovery_and_FlashTool.zip - 12.54 MB
Credits:
SuperDragonPT
Wiko
Carliv (Awesome CWM based Recovery)
iBotPeaches, brut.all (for apktool)
amarullz (for AROMA Installer)
Chainfire (for SuperSU)
rovo89 (for the AWESOME Xposed Framework), Learn More Here
C3C076 (For the AWESOME Xposed GravityBox module), Learn More Here
bgcngm(For Maintaining the Gbox JB Branch)
h0rn3t and educk (for Performance Control), Learn More Here
XDA:DevDB Information
[RECOVERY] [ROM] Wiko DarkMoon (MT6582) [MULTILANG] , ROM for the Android General
Contributors
superdragonpt
Source Code: https://github.com/dragonpt/Kernel_Wiko_DarkMoon_Custom
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-02-22
Created 2014-02-22
Last Updated 2015-02-14
How to flash custom recovery:
Make Sure your Phone is fully Charged
Make an Full Backup of your files (Photos/Contacts, etc)
Download The MT65xx_USB_VCOM_drivers.zip
Install The Mediatek VCOM Drivers (For Detailed Drivers instalation Instructions, please check this thread)
Download The Wiko Recovery and FlashTool
Extract the .zip and you'll see two folders "Recovery" and "SP_Flash_Tool"
Open "SP_Flash_Tool" > Flash_tool.exe > Scatter-Loading> And select the "MT6582_Android_scatter.txt" from the "Recovery" Folder
Turn OFF your Phone
Press "Download" (don't worry with the pop-up "Download-Warning" Message), press YES
Connect Your Phone to PC (Turned OFF) , The Flash Progress should beginn, when its succesfully Finished A Green Ring will shown.
Congrats The Recovery is installed
How to enter into recovery mode:
With the Phone completely turned off...
Press and hold VOL. UP + VOL DOWN + POWER keys and turn on the phone.
Keep holding the keys, wait until you see on Phone:
Code:
"Recovery Mode: Volume UP"
"Factory Mode: Volume Down"
Then Press on VOL. UP key, and Recovery will load.
Navigation under recovery mode:
As soon as the splash logo disappears, Carliv Touch Recovery menu will appear. Navigation is Full Touch.
You can also use VOLUME keys (navigate up with VOL. UP and navigate down with VOL. DOWN) and POWER key to apply the action.
Scroll Pages under Recovery: To Scroll page down you have to swipe right, and for scroll page up to swipe left. Also swipe left for Go Back.
Aroma File Manager:
This Recovery Supports the Aroma File Manager
Whats this? Check here
Download the Aroma File Manager
Then just copy the aroma .*zip into the "Clockworkmod" folder on the root of your SD Card
Flashing The ROM:
Copy The ROM to The External SDCard
On Recovery:
Wipe Menu> Wipe All Data - PreFlash (Select YES - Wipe All)
Wipe Dalvik Cache (Select YES - Wipe Dalvik Cache)
Install zip > Choose zip SDCard (Select the location of the ROM.zip)
And Follow The On-Screen AROMA Installer Instructions
In the End the Phone will Reboot Itself
The first Boot will take some minutes (it's normal)
F.A.Q
Q: How Can i acess The MTK Eng Mode?
A: GravityBox >Engineering Mode
Q: What Mods can i do on the Eng.Mode?
A: There are alot of things you can do, the two most common are:
Increasing volume Level:
MTK Menu> Hardware Testing> Audio> On the "headset mode" and "LoundSpeaker Mode" set max values to 145 (The max is 160, but i dont advise it, stay safe and use the 145 value)
Speed up the GPS reception :
(Before Going to the MTK Menu)
Open the app "FasterGPS", and give it root permissions
Choose your Continent, your region (at this point, your gps is properly configured with your country *.ntp values)
(Now on MTK Menu ...)
MTK Menu> Location> Location Based Service> On the "AGPS" tab, tick the "Enable A-GPS", and on the "EPO" tab, tick "Enable EPO" and "Auto Download" , this last option will download the EPO files it requires an data connection.
Start the app "GPS Status", in the first Satts Lock, you need to wait a little bit (it can take up to 15m, be sure you are in an Open Area).
When you get an good lock, on Satts, your DONE.
A: I dont see the Development Options, how can i acess it?
Q: Unlocking the Development Options:
Go to "Settings" > "About Phone"
Then tap 7 times on the "Build Number"
Q: Where are the Development Options?
A: Settings> Developer Options
Q: What is the Performance Control?
A: Its an Control Panel, where you can Change / managed the CPU Governors/ IO Shedulers / among several other things.
Q: The Launcher sometimes seems an bit laggy
A: Go to Settings> Developer Options> on "Window animation scale" set it to .5x, and on "Transition animation scale" set it to .5x
Q: I really like your work, how can i thank you?
A: You can press the "THANKS" button, and if you want, you can donate some beers to me
Wiko DarkMoon internal memory re-partition
Mod Extended Userdata v1 ( 2GB ) --> Removed / Use the v2
This Mod will extend userdata partition to 2GB (stock size is 1GB) and the rest of the space will remain for the internal sdcard
NOTE: Make an FULL backup of your Rom under Recovery, and don't forget to also backup your Internal SDCard since it will be full erased
Instructions:
Download the Mod extended USRDATA.zip
Shutdown your phone
Extract the .zip
Open SP_Flash_Tool dir > Flash_tool.exe
In scatter-loading load the MT6582_Android_scatter.txt from the Internal_2GB_Mod Dir
Press Download
After flashing is complete, boot into recovery mode and format /data (under Mounts and Storage Menu)
Optionally, if you want to restore previously saved userdata, go to backup / restore > and restore data (advanced restore feature)
Profit
Mod Extended Userdata v2 (2.5 GB)
This Mod will extend userdata partition to 2.5GB (stock size is 1GB) and the rest of the space will remain for the internal sdcard
NOTE: Make an FULL backup of your Rom under Recovery, and don't forget to also backup your Internal SDCard since it will be full erased
Instructions:
Download the Mod extended USRDATA_2.5GB.zip
Shutdown your phone
Extract the .zip
Open SP_Flash_Tool dir > Flash_tool.exe
In scatter-loading load the MT6582_Android_scatter.txt from the Internal_2.5GB_Mod Dir
Press Download
After flashing is complete, boot into recovery mode and format /data (under Mounts and Storage Menu)
Optionally, if you want to restore previously saved userdata, go to backup / restore > and restore data (advanced restore feature)
Profit
Reverting to the Stock ROM
This will revert back your phone to STOCK (including the stock recovery), in case you need to send your phone to the Service Center
Instructions:
Go to Wiko's website and download the latest Rom Version:
http://fr.wikomobile.com/maj.php?telephone=131
Follow the instructions given ...
Older instructions:
Download the DARKMOON_JB4.2.2._Stock Rom-wiko_rev8.zip
Use the SPFlashTool that i provided with the CWM Recovery .zip
Make sure phone is fully charged
Shutdown your phone
Extract the .zip
Open SP_Flash_Tool dir > Flash_tool.exe
In scatter-loading load the MT6582_Android_scatter.txt
Press Download
After flashing is complete,you'll see an green circle
Profit
Thanks. Can you add some screenshots?
h3lder said:
Thanks. Can you add some screenshots?
Click to expand...
Click to collapse
Was Uploading, check under the ScreenShots TAB
Regards
I doubt:
on step "How to flash custom recovery" - before you can do this you need to have already rooted the device?
can you please add how to root the device? it will be nice to complete better all the info.. but is already great!
congrats and thanks you! as soon as i by my wiko darkmoon i will definitely try it!
sapoide said:
I doubt:
on step "How to flash custom recovery" - before you can do this you need to have already rooted the device?
can you please add how to root the device? it will be nice to complete better all the info.. but is already great!
congrats and thanks you! as soon as i by my wiko darkmoon i will definitely try it!
Click to expand...
Click to collapse
Hi
You can root with framaroot, but i dont think thats necessary.
Just flash The recovery, then The ROM.
Regards
superdragonpt said:
Hi
You can root with framaroot, but i dont think thats necessary.
Just flash The recovery, then The ROM.
Regards
Click to expand...
Click to collapse
Ok understood, thanks
Do this rom will work with my Xolo Q700S?
Sent from my Q700S using xda app-developers app
superdragonpt:
Where can you please downloaded the source code for kernel mt6582? Can you give me a link please?
Or: Your sources kernel what you gave to download are original (unchanged)?
Edit:
OK. I found where you can download the source. Sorry for the spam.
http://forum.xda-developers.com/showthread.php?t=2645756
http://forum.xda-developers.com/showthread.php?t=2650513
Hi
You guys are all crazy with the MTK leaked sources, but do you even have an clue what those sources are?
You cant just compile an source that's customize for other phone , thinking it will work on yours.
There's a lot of work to be done, and you need an huge amount of luck to have your phone drivers available in that source.
This said, I will appreciate that people avoid off-topic and other phones talk in this thread.
This ROM and recovery will only work on wiko darkmoon and Micromax a200 (clone).
If your using this ROM as a base for another MT6582 phone, please be an gentlemen and give proper credits.
Regards
Added Internal USRDATA Mod to the OP
Check post #4
Enjoy
superdragonpt said:
Added Internal USRDATA Mod to the OP
Check post #4
Enjoy
Click to expand...
Click to collapse
Great work, thanks.
Do you know by any chance if there is any option to add languages to this rom? Wiko doesn't include many languages. I can use locale2 from google play, but that only translates some of the functions.
skydancer79 said:
Great work, thanks.
Do you know by any chance if there is any option to add languages to this rom? Wiko doesn't include many languages. I can use locale2 from google play, but that only translates some of the functions.
Click to expand...
Click to collapse
The ROM is multi language.
What language where you looking for?
Regards
superdragonpt said:
The ROM is multi language.
What language where you looking for?
Regards
Click to expand...
Click to collapse
Slovenian...most android phones have it. Moto G had the same "problem"
skydancer79 said:
Slovenian...most android phones have it. Moto G had the same "problem"
Click to expand...
Click to collapse
Hi
Yes i know, when i made a MIUI rom for my old ZTE v970, i had an hard time trying to find the proper strings for your language.
Even on stock roms from big brands, its very rare to find support for that language.
Im trying to merge and revise some strings from various sources, maybe in an future version.
Regards
superdragonpt said:
Hi
Yes i know, when i made a MIUI rom for my old ZTE v970, i had an hard time trying to find the proper strings for your language.
Even on stock roms from big brands, its very rare to find support for that language.
Im trying to merge and revise some strings from various sources, maybe in an future version.
Regards
Click to expand...
Click to collapse
Great, that would be awsome.
As for rarity of my language, I find it quite well supported. Google Nexus has it, all Samsungs have it, so does HTC, Sony... I know Prestigio and Gsmart have it. CM also. It's not a big deal, but nevertheless - I wouldn't mind having it
Great ROM btw, very customizable.
skydancer79 said:
Great, that would be awsome.
As for rarity of my language, I find it quite well supported. Google Nexus has it, all Samsungs have it, so does HTC, Sony... I know Prestigio and Gsmart have it. CM also. It's not a big deal, but nevertheless - I wouldn't mind having it
Great ROM btw, very customizable.
Click to expand...
Click to collapse
Hi
Well good news and bad news
The good:
I managed to Build an UNOFFICIAL Lewa Rom for our device, currently fixing the lastest issues and adding multi-language support.
So since im currently working on this language strings, might as well use that work for this rom also.
Preview pics:
http://i.imgur.com/VAGpQI3.png
Http://imgur.com/1IADxZx
Http://imgur.com/1C56EO6
The bad:
From what i gather until now, only about 100 slovenian strings are compatible (this is less than 5% of overall translation files), will keep looking
Regards
superdragonpt said:
Hi
Well good news and bad news
The good:
I managed to Build an UNOFFICIAL Lewa Rom for our device, currently fixing the lastest issues and adding multi-language support.
So since im currently working on this language strings, might as well use that work for this rom also.
Preview pics:
http://i.imgur.com/VAGpQI3.png
Http://imgur.com/1IADxZx
Http://imgur.com/1C56EO6
The bad:
From what i gather until now, only about 100 slovenian strings are compatible (this is less than 5% of overall translation files), will keep looking
Regards
Click to expand...
Click to collapse
So is this ROM fully functional? I mean no bugs? For English language.. I could test it on my Turbo mini
There are many Custom ROM’s available for Zen Ultrafone 701 HD and finally i ported lenovo P780 Rom For Ultrfone 701 HD . This ROM is for those who love Lenovo’s user interface. The developer has imported some features of Lenovo phones.
You can see the list of features here:
• Based on Android 4.2.1
• Lenovo UI :A Different user interface
• Android 4.2 & 4.3 Camera & Gallery
• Lenovo boot animation
• Lenovo Shutdown Animation
• Lenovo Power saver App.(for those who want good power backup rom)
• Lenovo Contacts App.(ui is very simple)
• Lenovo Browser
• Lenovo Launcher
• Lenovo Notification panel
• Lenovo phone
• Lenovo Music
• Lenovo File manager
• 20% transparent status bar
• Some smart features in settings tab.
• Pre rooted
• Xposed installer
• Viper
• New Lenovo Calculator
• Lenovo Launcher
This was made through the resources already available on various threads in XDA....All credits to the original developers.....
I take DO NOT responsibility for any damages - It worked on my phone, no reason it should not work on the other 701HDs out there.... Take a backup of all important stuff... Better safe than sorry..
Please note that you need to root your Zen Ultrafone 701 HD before flashing and it will void your warranty. Ensure that you have a minimum of 75% charging before you start the flashing process.Always backup your phone before you start your flashing process. We recommend Titanium Backup which can be downloaded from Play Store
To flash the Custom ROM’s given, simply follow these steps:
1. Download the ROM zip
2. Copy it on your SD Card
3. Enter CWM Recovery ( by mobile uncle tool or other)
4. Select “Wipe data/factory reset”
5. Select “Wipe Cache partition”
6. Select “Wipe Dalvik Cache”
7. Select “Install Zip from SD Card” and choose the ROM zip file which you had downloaded.
8. Wait till the process completes. After completion, your device will reboot and will optimize your apps. Note that it will take some time.
9. Done.
Please press thanx, if your like my work.
is it working good in all features after porting in zen ultrafone 701?
where is the rom?
provide the link if it is working good!
rom address
the1abhi said:
is it working good in all features after porting in zen ultrafone 701?
where is the rom?
provide the link if it is working good!
Click to expand...
Click to collapse
Plz provide your email address..I will privide you , the link of the rom.my. Google email address is abhikmr168.
If you like this then plz thanx
---------- Post added at 08:33 AM ---------- Previous post was at 08:27 AM ----------
And if you want miui v5 rom for ultrafone 701 hd..reply on my google email address.. I will provide you both link.actually it is a my new account and I cant add any external email adress and link..
abhishek thakur said:
There are many Custom ROM’s available for Zen Ultrafone 701 HD and finally i ported lenovo P780 Rom For Ultrfone 701 HD . This ROM is for those who love Lenovo’s user interface. The developer has imported some features of Lenovo phones.
You can see the list of features here:
• Based on Android 4.2.1
• Lenovo UI :A Different user interface
• Android 4.2 & 4.3 Camera & Gallery
• Lenovo boot animation
• Lenovo Shutdown Animation
• Lenovo Power saver App.(for those who want good power backup rom)
• Lenovo Contacts App.(ui is very simple)
• Lenovo Browser
• Lenovo Launcher
• Lenovo Notification panel
• Lenovo phone
• Lenovo Music
• Lenovo File manager
• 20% transparent status bar
• Some smart features in settings tab.
• Pre rooted
• Xposed installer
• Viper
• New Lenovo Calculator
• Lenovo Launcher
This was made through the resources already available on various threads in XDA....All credits to the original developers.....
I take DO NOT responsibility for any damages - It worked on my phone, no reason it should not work on the other 701HDs out there.... Take a backup of all important stuff... Better safe than sorry..
Please note that you need to root your Zen Ultrafone 701 HD before flashing and it will void your warranty. Ensure that you have a minimum of 75% charging before you start the flashing process.Always backup your phone before you start your flashing process. We recommend Titanium Backup which can be downloaded from Play Store
To flash the Custom ROM’s given, simply follow these steps:
1. Download the ROM zip
2. Copy it on your SD Card
3. Enter CWM Recovery ( by mobile uncle tool or other)
4. Select “Wipe data/factory reset”
5. Select “Wipe Cache partition”
6. Select “Wipe Dalvik Cache”
7. Select “Install Zip from SD Card” and choose the ROM zip file which you had downloaded.
8. Wait till the process completes. After completion, your device will reboot and will optimize your apps. Note that it will take some time.
9. Done.
Please press thanx, if your like my work.
Click to expand...
Click to collapse
Could you please share down load links, i can try flashing the rom
abhishek thakur said:
There are many Custom ROM’s available for Zen Ultrafone 701 HD and finally i ported lenovo P780 Rom For Ultrfone 701 HD . This ROM is for those who love Lenovo’s user interface. The developer has imported some features of Lenovo phones.
You can see the list of features here:
• Based on Android 4.2.1
• Lenovo UI :A Different user interface
• Android 4.2 & 4.3 Camera & Gallery
• Lenovo boot animation
• Lenovo Shutdown Animation
• Lenovo Power saver App.(for those who want good power backup rom)
• Lenovo Contacts App.(ui is very simple)
• Lenovo Browser
• Lenovo Launcher
• Lenovo Notification panel
• Lenovo phone
• Lenovo Music
• Lenovo File manager
• 20% transparent status bar
• Some smart features in settings tab.
• Pre rooted
• Xposed installer
• Viper
• New Lenovo Calculator
• Lenovo Launcher
This was made through the resources already available on various threads in XDA....All credits to the original developers.....
I take DO NOT responsibility for any damages - It worked on my phone, no reason it should not work on the other 701HDs out there.... Take a backup of all important stuff... Better safe than sorry..
Please note that you need to root your Zen Ultrafone 701 HD before flashing and it will void your warranty. Ensure that you have a minimum of 75% charging before you start the flashing process.Always backup your phone before you start your flashing process. We recommend Titanium Backup which can be downloaded from Play Store
To flash the Custom ROM’s given, simply follow these steps:
1. Download the ROM zip
2. Copy it on your SD Card
3. Enter CWM Recovery ( by mobile uncle tool or other)
4. Select “Wipe data/factory reset”
5. Select “Wipe Cache partition”
6. Select “Wipe Dalvik Cache”
7. Select “Install Zip from SD Card” and choose the ROM zip file which you had downloaded.
8. Wait till the process completes. After completion, your device will reboot and will optimize your apps. Note that it will take some time.
9. Done.
Please press thanx, if your like my work.
Click to expand...
Click to collapse
Well, I can't see the links to download the file from ! Is it possible for you to share the links with us ??
abhithakur said:
Plz provide your email address..I will privide you , the link of the rom.my. Google email address is abhikmr168.
If you like this then plz thanx
---------- Post added at 08:33 AM ---------- Previous post was at 08:27 AM ----------
And if you want miui v5 rom for ultrafone 701 hd..reply on my google email address.. I will provide you both link.actually it is a my new account and I cant add any external email adress and link..
Click to expand...
Click to collapse
my email is [email protected]
send me the link of both roms (lenovo & MIUI v5).
Thanks
Orignal Thread :- http://4pda.ru/forum/index.php?showtopic=577004&st=960#entry33634873
SYSTEM PARTITION NEEDED
-Latest Android 4.4.2
-Latest Android 4.4.2 Lenovo Camera with Gallery
-Good Battery Backup
-Playing Games Smoothly
-Buttery Smooth
-Settings themed
-S5 Status Bar
-3G SIM Switch
-Sim Toolkit
-Quick Setting
-New Bootlogo
-Init.d Scripts
-Latest Playstore
-KK LockScreen
-KK Dialer
-KK Contacts
-KK Messages
And Many More.........
Bugs :
Memory Reversed
Tell if you see any More....
Installation :
How To Flash :
use KK support CWM Recovery AND system partition needed.
( You Can Take CMW Backup for Revert back to your old system )
1) Download ROM zip File below link
2) Put into External/Internal SD Card
3) Go To CMW Recovery
4) Wipe Data/Factory Reset
5) Wipe Cache
6) From Advance Menu Do Delvik Cache Clear
7) Go in Mount And Storage select FORMAT SYSTEM
8) Select Install From SD and Select file And Click YES
9) Select ROM zip And Select YES
10) Reboot
11) Congrats You have Rom now....Report if you find bugs
(It will take around 5 Min. for first boot)
** Process To flash Patch **
1) Go to Cwm recovery
2) Select install from zip
3) select Patch zip and yes
4) Reboot.
Screen Shots
If flashing KK BASED ROM destruction in whatsoever in your world, neither me, nor any of my dev brothers and not even WEB OR FORUM SITE is responsible for that.
You are the one who has choosen to modify your phone and so all risk and durability is your only, no one
(credit : DinasNet from 4pda, Besik_13 xda developers. If I forgot a any developer name please suggest me I will add
& Swapnil Bunjkar for MicroMax Canvas 2+ A110Q Kitkat 4.4.X )
sorry for my bad english.
Happy Diwali and this is your Diwali Bonus
Downloads
Mirror1
Mirror2
For root Problem Flash this
boot_updateV3(PERFORMANCE, BATTERY)
Tip :- Register free account on UsersFiles then activate then login with your ID and Pass then download. There is no download limit
Pay attention to the BusyBox ... Viper4Android swears on Box ...
did anyone try this rom can u all give back some reviewsor bugs or whatever this rom have and is this real kitkat
It's kitkat only but battery draining soon and it's looking like themed, can't go to recovery Mode using mobile uncle tools always have to switch off n have to go by pressing buttons.so I'm back to CM11.
sorry but
honestly the worst rom ever
I created this thread since there are no dedicated forums/threads for this specific model.
All these files are tested and works perfectly.
POST 1 = All the Necessary Files
POST 2= Guide and Tutorial
POST 3= Custom ROMs list & download.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FLASH TOOLS:
-MobileUncle MTK Tools v2.9.9: See Attachment
-SP Flash Tool v5.1516: http://www.mediafire.com/download/0ch3gbea3loais3/SP_Flash_Tool_v5.1516.zip
SPFT FIRMWARES:
SDs_Acer_AV0K0_Z500_1.005.00_EMEA_BGCs.zip : http://bit.ly/1BhCFQe
SDs_Acer_AV0K0_Z500_1.008.00_EMEA_CUS1.zip : http://bit.ly/1BhCGDJ
SDs_Acer_AV0K0_Z500_1.012.00_EMEA_GEN1.zip : http://bit.ly/1BhCG6u
SDs_Acer_AV0K0_Z500_1.012.00_EMEA_GEN1s.zip : http://bit.ly/1BhCGDN
SDs_Acer_AV0K0_Z500_1.008.00_EMEA_CUS1.zip : http://bit.ly/1BhCGU5
SDs_Acer_AV0K0_Z500_1.008.00_EMEA_GEN2.zip : http://bit.ly/1BhCGU7
SDs_Acer_AV0K0_Z500_1.006.00_EMEA_GEN3.zip : http://bit.ly/1BhCG6A
SDs_Acer_AV0K0_Z500_1.007.00_EMEA_GEN3.zip : http://bit.ly/1BhCGUb
SDs_Acer_AV0K0_Z500_1.003.00_EMEA_MTSs.zip : http://bit.ly/1BhCGUg
CUSTOM RECOVERY:
-Carliv Touch Recovery 3: http://acer.shreps.fr/dl.php?v=Carl...Ub3VjaC1yZWNvdmVyeS0zX1o1MDAtU2hyZXBzLmltZw,,
-ClockWork Mod Recovery 6.0.5: http://acer.shreps.fr/dl.php?v=CWM_...vWjUwMC9DV01fNi4wLjUuMC1aNTAwX1NocmVwcy5pbWc,
-ClockWork Mod Recovery 5.5 (Auto GEN): http://acer.shreps.fr/dls/storage/Z500/Z500_141010__recovery_141226-155907.img
ROOT TOOLS:
-KingoRoot for Windows (.exe)
-KingoRoot for Android (.apk)
See attachments
CUSTOM ROMS:
See third Post!
note: You don't need a Facebook account to view or download these Custom ROMs.
-----------------------------------------------------------------
Special thanks and credits to:
@Shreps for providing the acer firmware/recovery files and his dedicated Acer Thread.
MaximumROM for providing the ported Custom ROMs.
@AndroidXDA for the latest SP Flash Tool.
Getting Started
USE AT OWN RISK! I'M NOT RESPONSIBLE FOR ANY DAMAGES OR BRICKS THAT MIGHT OCCUR UPON FLASHING. YOU'VE BEEN WARNED!!!.
Before doing any flashing with your Acer Liquid Z500 you'll need to Root your device and flash a custom recovery. This is mandatory for flashing Custom Roms and making Backups.
Rooting may void your warranty, though this is localized and may not apply for your area/country. Here, in The Netherlands, rooting your android phone has been approved legal by the government, thus keeping your warranty if you need to return your device to the manufacturer.
This does NOT apply for flashing Custom Recovery's, therefore you need to flash back to the stock recovery.
Rooting:
First we want to Root our phone. We need KingoRoot for that. You can find it in my attachment in the post above. I haven't used the Android version, so i´ll only guide you through the windows version of KingoRoot.
People without a PC can try the provided KingoRoot_Android.zip, but i cannot guarantee it will work as i haven't tested it myself.
01) Go to your device settings and select 'Device Info'. Scroll down and tap the 'Build Number' 5x until you've unlocked 'Developer Options' displayed in a toast.
02) Go to 'Settings/Developer Options' and check 'USB Debugging Enabled' you are now ready to receive additional usb drivers and adb has full access to change files.
03) Connect your phone to your computer with a USB cable and wait until it's finished installing drivers.
03) Download and install KingoRoot for windows .
04) Run KingoRoot, the program itself is pretty self explanatory. Just click 'ROOT' and wait until the program has finished flashing. It will reboot your device automaticly on success and superuser app called 'KingUser' will be installed with it. If you don't like it you can try SuperUser or SuperSU from the playstore. (Make sure you've granted them SU_Access with KingUser before you remove KingUser)
05) You are now ready to flash a Custom Recovery.
Custom Recovery:
Now we need a Custom Recovery. We can use SP FlashTool to do that or we can use MobileUncle MTK Tools. I'm going with the latter because it's more user friendly instead of going through SPFT & Scatter Files. I haven't tried 'Flashify' or 'Rashr Flash Tool' for flashing Recovery's on MTK devices.
01) Download CTR or CWM Custom Recovery's from the above post. Make sure they are located at the root of your SDCard. Move/Paste them from /Download folder if necessary.
02) Download MobileUncle from my attachment or download it from the Google PlayStore.
03) Grand SU_Access to MobileUncle and select 'Flash Firmware'.
04) Your downloaded Custom Recovery's will be shown (if moved propertly to root of SD) select it and click 'Flash'.
05) Reboot into your new Custom Recovery automaticly --when prompted to do so--, or do it manually by turning phone off/on with 'Vol+ (Up) & Power' and select 'Recovery' in acer menu (apply/select with Vol- (Down))
06) Now make a nand/stock backup of your current (Stock) ROM.
07) When leaving Custom Recovery for the 1st time, it might ask you 'Rebooting device might change Recovery to Stock, want to fix it?' reply with Yes.
Flashing Custom ROMs:
Flashing a custom rom is easy. And if you perform everything right, you won't have to worry that you'll brick your device. I've tested most of the ROMs by myself, i can assure you that it's a save deal, just follow the instructions carefully.
01) Download a Custom ROM of your preference (See Post #3) Click the HIDE button to see additional Info and Instructions (which are taken directly from their FB page).
02) Reboot into Recovery and make a backup of your current rom.
03) Do a full cache/data/system wipe and wipe dalvik.
04) Select 'Install zip from sdcard' and select your downloaded rom.
05) Wait until it's finished flashing.
06) Reboot your device and enjoy!
Unbrick / Flashing Stock Firmware:
I haven't had the pleasure yet to unbrick any MTK device (a good thing, right!?), so i'm a little scarse to give any info onto how to perform such tasks with SPFT as someone who has experienced it by hand.
Neither have i re-flashed to Stock Firmware, because on all the MTK devices i've used, any Custom ROM for those devices worked flawlessly.
Check out the Acer thread by @Shreps for detailed instructions on how to restore and unbrick your acer phone. This method works for various Acer models.
http://forum.xda-developers.com/android/development/guide-firmwares-roms-cwm-root-acer-mtk-t2945933
The following ROMs are all based on Android 4.4.2 KitKat and some are heavily customized to look like Lollipop
The following Custom ROMs have been tested with the 'SINGLE SIM' variant of the Acer Liquid Z500. I don't think it'll work with the 'Dual Sim' versions of this handset.
PopKat v2.0
Popkatv2 for ACER Liquid Z500 (MT6582)
by jheffong
CREDITS TO Sir Neil Edward D. Diaz for developing this ROM.
Please READ the whole document!!!
Common features:
Deodexed
Zipaligned
Tweaked
Aside from being heavily-skinned with material design, this includes the following:
*Lollipop Launcher, Icons, Apps
*Lollipop Toggles in Notification Panel
*Floating Button in Modded MMS
*Simple Battery Styles
*Fluid animations for eye-candy
*Dolby Digital Plus (Super Loud Audio) for extreme music experience!
*No storage bug for single EBR firmwares
*No keyboard force close in land scape mode
*Can receive/send apk via bluetooth
*Efficient RAM management
*Already rooted with Kingroot
*Root explorer working woithout bugs
*Lollipop easter eggs
*AND MUCH MORE!
CHANGELOGS:
WIFI TETHERING > FIXED!
USB TETHERTING > FIXED!
GOOGLE PLAYSTORE ISSUE > FIXED!
OFF CHARGING ANIMATION > FIXED!
PHOTO EDITING on GALLERY > FIXED!
Download Rom
HOW TO INSTALL:
1. Reboot to CarlivTouchRecovery/CTR. (Not tested on other custom recovery)
2. Make sure you have a backup
3. Perform a full wipe.
4. Flash the Rom. (PopKatv2_Z500.zip)
5. Wait to boot up, it takes time, relax.
6. Reboot, ENJOY!!!
7. Go to CTR, flash the patch, reboot!
NOTES: Pay attention to this!!!
1. Go to Settings/Xposed/Modules >> check all the modules. Go to Framework tap "Install/Update" it will reboot.
Patch MMS/Settings/Bluetooth
======================================================
PussyFap v2.5
PUSSYFAP ROM for ACER LIQUID Z500 (MT6582)
by jheffong
CREDITS to Don Delfin Espino, DEVELOPER OF THIS PUSSYFAP ROM.
***** Fap is an Android 5.0 Lollipop Inspired Rom. With a little bit of Twist... *****
colonthree-emoticon
Features:
Material Themed
Lollipop Inspired Platlogo
Built-in Features on Advance Tab
Dolby Digital Plus
Themed Recent Apps
Custom Action Bar
Hybrid Signal Bars
3minit Battery Styles
Smooth Lollipop Animations
Tinted Statusbar
Google Boot Logo
Android L Bootanimations
UPDATE: PussyFap v2.5
Fixed Font Style
Fixed Keyboard Force Closes
Fixed Dialer dialpad digits size
Fixed Wrong tint in Gallery app
Fixed SystemUI Force closes when adding
Navigation Bar
Fixed FB videos when palying on stock browser
Making Battery Styles Non apk to save
more ram
UC browser app also added
PLEASE READ THIS FIRST!
Notes:
1. 1). Flash Rom, 2). Flash Update.zip, 3) Flash Dolby.zip & 4). Flash Root.zip - Reboot.
2. After flashing ROM it may say "SYSTEMUI has stopped"
3. Please uninstall Clean Master APP.
Download Rom
[UPDATE]PussyFapV2.5.zip
DolbyForPussyFap.zip
KingUser.zip
======================================================
VionicL v1.5
VIONIC L for ACER Liquid Z500 (MT6582)
by jheffong
CREDITS TO:
ROM DEVELOPER: Vibhor Chaudhary, FULL CREDITS TO HIM!!!
FEATURES:
*Themed like dark pure material
*Added working brightness slider
*Themed contacts, music player, mms and dialer, Stock file manager as well
*Animated check boxes and radio buttons
*Android L lockring added
*Bold clock in status bar and status bar expanded
*Changed the color of status bar
*Android L keyboard*Transparent recent apps background
*Android L bootanimation
*Rom is not rooted, you gotta flash root.zip
*Added battery and setings in status bar expanded.. see screenshots
*Changed most of the app icons to match with lolipop icons
*Battery and Performance Tweaks added
*Fully deodexed /app, /priv-app, /framework
*Dolby Digital player added
*Click on battery icon in status bar expanded will take you to battery too
*Tool box, listview animations, xposed integration. dolby digital player, Smart Gestures, Engineering mode is a part of settings now
*Ad free hosts
*Android L ester egg with lland game..
*Android l call
*Remaining figure out yourself
HOW TO INSTALL:
1. Reboot to CarlivTouchRecovery/CTR. (Not tested on other custom recovery)
2. Make sure you have a backup
3. Perform a full wipe.
4. Flash the Rom. (VionicL.zip)
5. Flash the ROOT.zip
6. Wait to boot up, it takes time, relax.
7.Reboot into recovery mode again. (CarlicTouchRecovery)
8.Flash the "VionicL_Update.zip"
9.Reboot, ENJOY!!!
Download Rom
Update v1.5
Root
======================================================
XPERIA Z2
XPERIA Z2 for ACER Liquid Z500 (MT6582)
by jheffong
HIGHLIGHTS:
Xperia Z2 UI and Features
Xperia Z2 X-Reality Engine
Xperia Sound Enhancement/Clear-audio+
Working Walkman Visualizer
Sony Social Camera and Media Apps
Themed Dialer, Contacts, MMS by kishorerprem
Customizable Battery Icon
Moded Lockscreen added by me
Navigation Bar Settings added by me
Material Wallpaper added by me
Listview Animation added by me (removed by default to lessen battery consumption)
Multi-Window Sidebar
Visible brightness slider in notification panel
Xpose Installer integrated to Settings
AROMA INSTALLER
Gapps Included Pre-Rooted and a lot more..
Note: Back-up your Previews ROM and your Google Account before flashing in case you encountered google signing-in problem just restore your account and you are good to go
INSTRUCTIONS:
1. Reboot to CarlivTouchRecovery/CTR. (Not tested on other custom recovery)
2. Make sure you have a backup
3. Perform a full wipe.
4. Choose zip from SD card locate ROM zip package
5. Install & wait for Maximum ROM Installer prompted
6. Follow all given instructions and options
7. After the ROM flashed completed click finish, reboot your device.
8. Wait to boot up, it takes time, relax.
=
9. Go to CTR again, flash the "UPDATE_(1) Z2_updated.zip" , REBOOT.
10. You'll see " Android is upgrading..." just WAIT.
=
11. Go to CTR again, flash the "UPDATE_(2) Z2_update_bravo.zip" , REBOOT.
=
12. Go to CTR again, flash the "UPDATE_(3) SocialCamera&MediaApps.zip" , REBOOT.
=
13. Go to CTR again, flash the "UPDATE_(4) XperiaHomeWithNavBar.zip" , REBOOT.
CONGRATULATIONS!!!
FIRST THING TO DO's:
1. Go to settings > personalization > Lockscreen Settings (make some changes of your own)
2. Go to Settings > Blur Settings > Scroll and find Translucent Background and check the following: Header, Quick Settings, Notifications.
3. Go to Settings > Xposed framework > Xposed Installer > Modules> check all modules provided then install xpose framework.
Pay attention to this - After start-up guide you will ask to choose Home App
Choose Xperia Home and select "Always"(do not choose lockscreen)
BUG: OFF CHARGING ANIMATION, not a big deal anyway.
Download all files
Download Rom
Update1
Update2
Update3
Update4
======================================================
Samsung Galaxy S5
Samsung Galaxy S5 for ACER Liquid Z500 (MT6582)
by jheffong
HIGHLIGHTS
Samsung S5 UI
Samsung S5 Messaging
Samsung S5 Settings
Samsung S5 Dialer
Samsung S5 everything
DUAL SIM
4G (KUNO)
ROOTED
ODEXED
How to install: MAKE SURE YOUR PHONE IS ROOTED!!!
1. Reboot to CarlivTouchRecovery/CTR. (Not tested on other custom recovery)
2. Make sure you have a backup
3. Perform a full wipe.
4. Flash the Rom.
5. ENJOY!!!
Download Rom
PHONE STORAGE IS NOW DETECTED!!!
NO MORE POP UP "*android.process.media has stopped" after using USB STORAGE.
Instructions:
1. Download the BUGFIXv1.zip(boot.img). EXTRACT! Drag and replace the boot.img inside the ROM.
FLASH THE ROM.
2.Download the BUGFIXv1.zip(boot.img). EXTRACT! If you have BACKUP just replace the boot.img inside of it. RESTORE.
Patch
======================================================
If anyone know more Custom ROMs that are compatible with the Acer Liquid Z500 please post them or PM me with the info so i can add them to this section.
I'm sorry for not including any screenshots because the original source has not provided them on their Facebook page for this specific model (Only for the CherryMobile Flare3).
Source: MaximumROM
Screens of the VionicL v1.5 ROM that i'm using as a daily driver.
Nice to see this
Good job
Shreps said:
Nice to see this
Good job
Click to expand...
Click to collapse
Yeah it's too bad there are no dedicated forums for Acer specific models. Even less popular devices have their own section.
There is not much Info on the Liquid Z500 regarding Custom Roms so i added all the roms i could find (from one source only though ) since XDA, HTCMania, MoDaCo, NeedRom, or any other site, do not feature them (google searches lack information).
So i took what i could find and cramped them into one Thread
Hello mate, thank you for this thread it looks awesome! I wanted to ask you where did you get SDs_Acer_AV0K0_Z500_1.003.00_EMEA_MTSs.zip firmware? My device came with it and when i was searching for it i couldn't find it! I was thinking maybe it's carrier branded firmware because MTS is the abbreviation of my carriers name... If i was mistaken do you by any chance know what does MTS part of it mean? Thanks in advance!
Ajax1337 said:
Hello mate, thank you for this thread it looks awesome! I wanted to ask you where did you get SDs_Acer_AV0K0_Z500_1.003.00_EMEA_MTSs.zip firmware? My device came with it and when i was searching for it i couldn't find it! I was thinking maybe it's carrier branded firmware because MTS is the abbreviation of my carriers name... If i was mistaken do you by any chance know what does MTS part of it mean? Thanks in advance!
Click to expand...
Click to collapse
As far as I was able to find it's because it's MTS branded...
Ajax1337 said:
Hello mate, thank you for this thread it looks awesome! I wanted to ask you where did you get SDs_Acer_AV0K0_Z500_1.003.00_EMEA_MTSs.zip firmware? My device came with it and when i was searching for it i couldn't find it! I was thinking maybe it's carrier branded firmware because MTS is the abbreviation of my carriers name... If i was mistaken do you by any chance know what does MTS part of it mean? Thanks in advance!
Click to expand...
Click to collapse
I did not find those files myself, but I took them from @Shreps main thread. But my hunch is that they are provided by acers official website.
About MTS, I don't know..
Sent from my ACER LIQUID Z500 using XDA Free mobile app
Just a little question. All of these ROMs are bug-less? Can you post some screens of the Galaxy S5 ROM please?
Thank you in advance
rogermachadostb said:
Just a little question. All of these ROMs are bug-less? Can you post some screens of the Galaxy S5 ROM please?
Thank you in advance
Click to expand...
Click to collapse
LOL... bug-less... Less bugs you mean? Bug-less in the world of automation and mobile devices does not exist...
You know what I meant. I'm not stupid and I understand that. I'm not asking for the perfect OS, I'm just asking if they are good for a daily use.
Please help,
i Have tied to get a custum rom on my Acer Z500...but now there is no life in it anymore...Only bleu light and when i connect the usb then it reconise the phone.
I Downloaded the rom, drivers, scatter for z500 and tried many times with SP_Flash_Tool_v5.1516 to try bring back life.
No succes and every time i get : Brom error; S_DL_GET_DRAM_SETTING_FAIL (5054)
I used the scatter from: http://forum.xda-developers.com/android/development/guide-firmwares-roms-cwm-root-acer-mtk-t2945933
It will be great someone can help me... Its my wife phone and this is nog good for my relation.
cejean said:
Please help,
i Have tied to get a custum rom on my Acer Z500...but now there is no life in it anymore...Only bleu light and when i connect the usb then it reconise the phone.
I Downloaded the rom, drivers, scatter for z500 and tried many times with SP_Flash_Tool_v5.1516 to try bring back life.
No succes and every time i get : Brom error; S_DL_GET_DRAM_SETTING_FAIL (5054)
I used the scatter from: http://forum.xda-developers.com/android/development/guide-firmwares-roms-cwm-root-acer-mtk-t2945933
It will be great someone can help me... Its my wife phone and this is nog good for my relation.
Click to expand...
Click to collapse
Have you followed my steps? because if you did you wouldn't need to mess with scatter files and the flashing is pretty easy compared to some other brands.
I have no discrete awnser, so if anybody else could shine some light on this issue, thanks!!
@nikagl mischien??
cejean said:
Please help,
i Have tied to get a custum rom on my Acer Z500...but now there is no life in it anymore...Only bleu light and when i connect the usb then it reconise the phone.
I Downloaded the rom, drivers, scatter for z500 and tried many times with SP_Flash_Tool_v5.1516 to try bring back life.
No succes and every time i get : Brom error; S_DL_GET_DRAM_SETTING_FAIL (5054)
I used the scatter from: http://forum.xda-developers.com/android/development/guide-firmwares-roms-cwm-root-acer-mtk-t2945933
It will be great someone can help me... Its my wife phone and this is nog good for my relation.
Click to expand...
Click to collapse
Dual or Single SIM device? What full SPFT roms did you try to install?
To recover a device you should follow this guide:
http://forum.xda-developers.com/showpost.php?p=56877584&postcount=2
And use these SPFT Firmwares (depending on single or dual SIM):
http://forum.xda-developers.com/showpost.php?p=61359937&postcount=4
Z500 Firmware - Acer_AV0K0_Z500_1.012.00_EMEA_GEN1.zip (Dual SIM)
Z500 Firmware - Acer_AV0K0_Z500_1.012.00_EMEA_GEN1s.7z (Single SIM)
Good luck!
Regards,
Nika.
JMailuhu said:
Have you followed my steps? because if you did you wouldn't need to mess with scatter files and the flashing is pretty easy compared to some other brands.
I have no discrete awnser, so if anybody else could shine some light on this issue, thanks!!
@nikagl mischien??
Click to expand...
Click to collapse
JMailuhu Thank you 1000 times!!
Life is back again on my Acer 500z.
Nice that you and Nika would help me to work it out/
Keep on youre good work please. :good:
Is there a Way to download the ROMs except MEGA? It always fails. Everything can be downloaded properly, just the ROM-Download interrupts always.
EDIT: And I will not buy anything there or pay for something...
Mario472 said:
Is there a Way to download the ROMs except MEGA? It always fails. Everything can be downloaded properly, just the ROM-Download interrupts always.
EDIT: And I will not buy anything there or pay for something...
Click to expand...
Click to collapse
I would prefer to know which you want so I can download them and provide them on another mirror.
The stock recovery (not SPFT as mentioned in first post!) are also mirrored here:
SDs_Acer_AV0K0_Z500_1.003.00_EMEA_MTSs.zip http://cutt.us/WRpMM
SDs_Acer_AV0K0_Z500_1.005.00_EMEA_BGCs.zip http://cutt.us/Vf7r
SDs_Acer_AV0K0_Z500_1.006.00_EMEA_GEN3.zip http://cutt.us/aeFAL
SDs_Acer_AV0K0_Z500_1.007.00_EMEA_GEN3.zip http://cutt.us/0vbM
SDs_Acer_AV0K0_Z500_1.008.00_EMEA_CUS1.zip http://cutt.us/wdw3
SDs_Acer_AV0K0_Z500_1.008.00_EMEA_GEN2.zip http://cutt.us/Up0NC
SDs_Acer_AV0K0_Z500_1.012.00_EMEA_GEN1.zip http://cutt.us/Fok9
SDs_Acer_AV0K0_Z500_1.012.00_EMEA_GEN1s.zip http://cutt.us/3QUa
Regards,
Nika
---------- Post added at 10:50 PM ---------- Previous post was at 10:11 PM ----------
And here's some of the custom ROMs:
POPKATv2PATCH.zip http://bit.ly/1TNVYUm
PopKatv2_z500.zip http://bit.ly/1TQ4mrK
PussyFapROM.zip http://bit.ly/1HStySr
ROOT.zip http://bit.ly/1NBviEC
S5ROM_ACERLz500.zip http://bit.ly/1JcStkx
UPDATE_(1) Z2_updated.zip http://bit.ly/1My6XCE
UPDATE_(2) Z2_update_bravo.zip http://bit.ly/1Ks6Hiv
UPDATE_(3) SocialCamera&MediaApps.zip http://bit.ly/1JdrxWm
UPDATE_(4) XperiaHomeWithNavBar.zip http://bit.ly/1My71Cp
VionicL+V1.5+update.zip http://bit.ly/1IZd7p2
[ROM] XPERIA Z2.zip http://bit.ly/1TNWj9I
Please sort yourself, add them as mirrors and let me know if I missed something and/or should mirror something else.
Regards,
Nika.
Thank you very much, I think it'll be the Samsung-Thing and hopefully it works with the Z500 Plus too. Acer even won't provide a Lollipop-ROM...
Anyway, I'm not using the 2nd SIM.
EDIT:The VionicL-Link seems to be broken.
Sent from my Z500 using XDA Free mobile app
hi, I was wondering if Xposed Framework can be used in Acer Z500? I really want to modify the notification bar, but the Cutom Rom in the first page says that it's probably impossible for Dual SIM version, so I want to modify it with Xposed.
Windows 8.1 ROM for Lenovo A536 [MTK6582]
by Lindjie C. Cabatuan
Nameless Porting Team
BIG CREDITS TO GM SHAKIL KHAN and to the Developers of this ROM
This is my first CROSS-PORTED ROM Thanks a lot to Nameless Porting Team.
NOTES:
FLASH AT YOUR OWN RISK.
This ROM is originally from MT6592 devices; just ported to MT6582
You can port it, just give proper credits
Features:
Android 4.4.2
Windows 8.1 UI
App Traffic Control
SafeBox (vault for hiding confidential files)
Pre-rooted (Kinguser)
ClearMotion ™ Video Enhancer
Built-in Power Saver
Motion Gestures
Xperia Keyboard
InFocus Support
Builtin apps like Lucky Patcher, Root Explorer
How to Flash ROM:
Place zip file of Windows 8.1 ROM in SD Card.
Reboot into recovery (TWRP for example)
Select Wipe on Main Menu, then Swipe to Wipe User Data/Cache/Dalvik Cache
Wipe /System
Go back to Menu, then select Install
Locate the ROM file (zip), then Swipe to Install. Wait for a few minutes as the ROM is being flashed.
Once the flashing is done, reboot the phone. Initial startup of the phone will take about 5-8 minutes as the ROM is being initialized for first use.
Link will be posted on the thread.
(C) 2015 by Lindjie C. Cabatuan
Hi
Sent from my GT-S5301 using Tapatalk
xzeroLinj said:
Windows 8.1 ROM for Lenovo A536 [MTK6582]
by Lindjie C. Cabatuan
Nameless Porting Team
BIG CREDITS TO GM SHAKIL KHAN and to the Developers of this ROM
This is my first CROSS-PORTED ROM Thanks a lot to Nameless Porting Team.
NOTES:
FLASH AT YOUR OWN RISK.
This ROM is originally from MT6592 devices; just ported to MT6582
You can port it, just give proper credits
Features:
Android 4.4.2
Windows 8.1 UI
App Traffic Control
SafeBox (vault for hiding confidential files)
Pre-rooted (Kinguser)
ClearMotion ™ Video Enhancer
Built-in Power Saver
Motion Gestures
Xperia Keyboard
InFocus Support
Builtin apps like Lucky Patcher, Root Explorer
How to Flash ROM:
Place zip file of Windows 8.1 ROM in SD Card.
Reboot into recovery (TWRP for example)
Select Wipe on Main Menu, then Swipe to Wipe User Data/Cache/Dalvik Cache
Wipe /System
Go back to Menu, then select Install
Locate the ROM file (zip), then Swipe to Install. Wait for a few minutes as the ROM is being flashed.
Once the flashing is done, reboot the phone. Initial startup of the phone will take about 5-8 minutes as the ROM is being initialized for first use.
Link will be posted on the thread.
(C) 2015 by Lindjie C. Cabatuan
Click to expand...
Click to collapse
link for download?
Looks like the download link was never provided.
Thread Closed