Related
i made a extremely poor decision and was trying to change the boot animation loader when i actually changed the boot cmd and now it boots to samsung then to download everytime,. i can get into the onboard recovery yet i cant access safestrap and none of the many many drivers ive tried i cant get the phone to show to connect, its listed as unknown device in my device manager and ive hand picked the ones im supposed to have to other ones. ADB doesnt see it either and i was wondering if there is cmd for adb to find myu device, if you help me guys i promise ill only practice on hand me down smart phones. Ty:cyclops: [email protected] SM-G870A
This may be a dumb question, but have you tried Odin? I have had situations similar to this with my Samsung devices and always thought i bricked. But as long i could get into download mode, i could Odin back to stock and start over.
MrAwesome75 said:
This may be a dumb question, but have you tried Odin? I have had situations similar to this with my Samsung devices and always thought i bricked. But as long i could get into download mode, i could Odin back to stock and start over.
Click to expand...
Click to collapse
ya but i havent even tried loading a file into odin cause it wont see my device
and i have installed the samsung drivers but after this happened my pc wont see the phone
has to be a way to get a connection between the pc and phone
I'm not an expert so I'm not sure. Do you have the correct drivers installed on PC?
---------- Post added at 06:34 AM ---------- Previous post was at 06:30 AM ----------
Try different Odin versions. And make sure you have the proper drivers installed on the PC.
ya ive actually read that it probably doesnt have the function running to talk with the pc cause it cant boot. im all set up to reset the phoone. just need it to appear in my odin
..does kies still work?
[email protected] said:
i made a extremely poor decision and was trying to change the boot animation loader when i actually changed the boot cmd and now it boots to samsung then to download everytime,. i can get into the onboard recovery yet i cant access safestrap and none of the many many drivers ive tried i cant get the phone to show to connect, its listed as unknown device in my device manager and ive hand picked the ones im supposed to have to other ones. ADB doesnt see it either and i was wondering if there is cmd for adb to find myu device, if you help me guys i promise ill only practice on hand me down smart phones. Ty:cyclops: [email protected] SM-G870A
Click to expand...
Click to collapse
When you boot to system
It doesn't show anything right ??
but the touch is still functioning
Sent from my GT-i9300 running cm11 using tapatalk.
when i just boot it goes to download mode and says "could not do do normal boot"
i can access recovery mode and download mode but i cant get drivers to show it, and it used to show it until i did this, can i put a file on my micro SDcard from my pc via card reader then install it in recovery mode ? like firmware or a memory wipe reset?
If you can get into recovery, I believe that would be possible. Couldn't hurt to try. As long as you can get into recovery and all the recovery functions work, I don't see why you couldn't.
fixed it!
well after two nights of reading i got my pc to discover the device by changing ports three different times to find one that seamed to like it. and also installed kies and installed the drivers from them, (figured couldnt go wrong after as many as ive used from samsung and others). so win7 pro / altered boot command and only stock options afterwards sucks big time. ty all for helping me
never let up
Hi Guys,
For unknown reasons my fone went DEAD (BLACK SCREEN... NOT A SINGLE SIGN ON CHARGING OR USB).. Need advice what to do ??? is it dead or can be brought back to life by FLASHING ???
Any senior member or someone please help me ...
If you connect to pc how will it be?try charge it first.then connect to pc.if detect, flash stock rom.if cant,try find spare battery just in case.
FOne is not showing any charge sign or anything... just QD LOADER 9008 in Device Manager
Do you see charging light when you plug in the charger?
As long as the phone receiving power you can fix it.
---------- Post added at 08:07 PM ---------- Previous post was at 08:06 PM ----------
Do you see charging light when you plug in the charger?
As long as the phone receiving power you can fix it.
Try connect to kies.does it detect or not? if you able to flash. try flash it to 5.0.1
What was the battery level (approx.)when the phone died?
You might want to try cleaning the battery and internal phone contacts with some Isopropyl Alcohol and a Qtip.
See if that helps.
Sent from my SM-N915W8 using XDA-Developers mobile app
Tried Everything... NEW BATTERY... But fone is not showing Charge on Adaptive not even on USB on LAPTOP... Just Qualcom Loader 9008 in Device Manager...
Asheque said:
Do you see charging light when you plug in the charger?
As long as the phone receiving power you can fix it.
---------- Post added at 08:07 PM ---------- Previous post was at 08:06 PM ----------
Do you see charging light when you plug in the charger?
As long as the phone receiving power you can fix it.
Click to expand...
Click to collapse
Around 76%
As u can seee ONly Qualcom device in Device Manager.....
basirbilal said:
Hi Guys,
For unknown reasons my fone went DEAD (BLACK SCREEN... NOT A SINGLE SIGN ON CHARGING OR USB).. Need advice what to do ??? is it dead or can be brought back to life by FLASHING ???
Any senior member or someone please help me ...
Click to expand...
Click to collapse
Hello, did you find a solution? I helped the image of the zero block recorded on the sd-card with the program "win32 disk imager" 915F
asmixo said:
Hello, did you find a solution? I helped the image of the zero block recorded on the sd-card with the program "win32 disk imager" 915F
Click to expand...
Click to collapse
No Sir still no solution of this problem
I helped a good man, he sent an image of the device. I recorded this image of the sdcard and the device will start with "Download" mode. Next, it is necessary to firmware flashing.
915F - sorry - region "SER". But the main thing - is to run the device, further will flashing firmware what you need.
Site do not give insert a link to a file. Write me in the mail - "[email protected]" I'll send a link to file/
Write the file need with program "win32 disk imager". If this method does not help is probably a problem with the hardware.
Good luck.
As per the screen shot posted it seems your pc picked up the correct driver. Now all you need to install is Odin. Then go to samobile.com and search your phone under Firmware. Make sure you got the exact model (pull out the battery and look for exact model #). Once downloaded go to Odin and check AP and select the file you downloaded. Then put your phone on Download Mode by pressing Vol Up + PWR at same time. Follow the instructions on your phone screen.
Once you connect your phone to pc it will show up as Port 3 or 4 or wherever the driver is connected to.
** As long as on Odin your phone gets picked up you will be able to push the firmware. Once you can do that you pretty much fixed it. If it's wtong fw then you will get a notice right away, if it's correct then you see the progress bar changing.
BL is corrupted, need to repair it,
Since this is a Qualcomm based device, you can flash only BL files to an SD Card then boot your device from that card until you get into Download mode,
then reflash the device with Odin,
Follow this guide:
1. Download debrick (BL) file from HERE,
2. Download Win32DiskImager from HERE,
3. Get an 32GB SD Card and connect it to PC,
4. Setup Win32 and Run it then do as the following picture,
5. Just let it finish, Then disconnect the SD Card,
6. Make sure the device's battery is well charged,
7. Put the SD Card into the phone,
8. Now you need to boot device into Download mode either by using USB JIG or by holding (Vol-, Home and Power),
9. Once device boot into Download, Pull out the SD,
10. Now just flash the phone with Latest FW (either Factory or One-Package will do the job),
11. There is no 11, we're done ..
##NOTE: Solution is TESTED and it works.
@mirosaw2 Will this also work with the SM-N915FY? Will this keep my data (contacts, SMS, photos etc) on the internal storage? I have my SM-N915FY in a state where it wouldn't recognize any commands, but it makes a connect / disconnect sound on my Windows computer when I just connect it via USB...
My original question is here.... https://forum.xda-developers.com/note-edge/help/note-edge-sm-n915fy-bricked-dreadful-t3754559
Edit: I just tried it and it worked!!! Thank you very much, now I'm able to restore my data and then I'll try to make the error gone with this tutorial: https://forum.xda-developers.com/showpost.php?p=66879466&postcount=10
My N915F stuck at Nand write start and the guide does not work.What else to do?
similar Problem
I have a note edge too, device flashed with stock firmware first but no luck, tried repair firmware and odin froze, talked
to experts and they said the partition is corrupted, device is stuck in "problem encountered while upgrading firmware . connect to kies and try again." how to fix ?????
Hi,
I tried to unlock bootloader. Rooted phone using King Root successfully. Opened bootloader using inside terminal and installing proper aboot. Then without restart i also flashed proper TWRP usning Twrp manager and after clicking reboot bang... black screen and nothing happens. Phone wont act on power button , keys combinations etc. When i connect it using usb i see partition with 2 folders (version and images). I tried some methods like using LG Flash Tool 2014 but it stucks on 4% and wont go ahead no matter what i do (recconecting ,removing battery etc). I would be VERY thankful if someone can provide me step by step solution or just do it via Teamviewer. If someone would like to help using TV method please contact me via skype (siuted.max - ID) and i ll provide TV ID.
Regards
Mat.
I really need that help guys I am even willing to pay for someone who is able to fix it.
Lg toolkit and pc easy fix but if you cant see recovery too or fastboot.using key combo do hou have the lg toolkit?fastboot,adb?sounds like you need too reload 15 second adb fastboot installer.when flash tool gets to adb or fastboot and get stuck.go to update driver device manager,and see if theres a triangle or ? There,then update that driver.let me know?
Sent from my SM-J320P using Tapatalk
skully35 said:
Lg toolkit and pc easy fix but if you cant see recovery too or fastboot.using key combo do hou have the lg toolkit?fastboot,adb?sounds like you need too reload 15 second adb fastboot installer.when flash tool gets to adb or fastboot and get stuck.go to update driver device manager,and see if theres a triangle or ? There,then update that driver.let me know?
Sent from my SM-J320P using Tapatalk
Click to expand...
Click to collapse
Thank You for reply ! Would You like to make it step by step and exactly what to do or links ?
1. I have LG Toolkit 2014
2. Fastboot and adb i have on my pc but "device not found" no matter what i do.
3. How to reload 15 second adb fastboot installer ?
OK I know its tuff when its not being s hown like. A video ?,I researched your model a little,do you see you costom recovery when using the hold home and volume up keys?or is that also blacked out? And can you see fastboot using phone keys?does your phone make a sound when plugged too your PC?a lot of questions but its important? then I can easily direct you better!
Sent from my Sero 7 pro using Tapatalk
---------- Post added at 11:46 AM ---------- Previous post was at 11:38 AM ----------
If you phone makes a noise plugged in I can guide you,k?I brought 4 phones back from the dead this week!I'm on a roll!lol,,when I stayed reload 15 min.installer I meant you may have to turn on terminal to PC and hit adb devices then check driver updater and reinstall your drivers.very easy I just need to know where we stand.
Sent from my Sero 7 pro using Tapatalk
I see nothing on the screen. No matter what i push (any combination) nothing appears. After connecting phone there is no sound. PC recognizes it as Android device. Thats all. No fastboot as well.
skully35 said:
OK I know its tuff when its not being s hown like. A video ,I researched your model a little,do you see you costom recovery when using the hold home and volume up keys?or is that also blacked out? And can you see fastboot using phone keys?does your phone make a sound when plugged too your PC?a lot of questions but its important then I can easily direct you better!
Sent from my Sero 7 pro using Tapatalk
---------- Post added at 11:46 AM ---------- Previous post was at 11:38 AM ----------
If you phone makes a noise plugged in I can guide you,k?I brought 4 phones back from the dead this week!I'm on a roll!lol,,when I stayed reload 15 min.installer I meant you may have to turn on terminal to PC and hit adb devices then check driver updater and reinstall your drivers.very easy I just need to know where we stand.
Sent from my Sero 7 pro using Tapatalk
Click to expand...
Click to collapse
Hey. Sorry to say but phone is not giving any vibration or noise... Only windows gives a sound typical to connecting USB device and thats all. Phone looks like dead and only thing is recognizing it by windows.
Hey,
Anybody knows a solution ? I read some threads here but i failed when trying. I would really appreciate for step by step walkthrough.
Thank You!
Guide to unbrick lg l90
fazics1 said:
Hi,
I tried to unlock bootloader. Rooted phone using King Root successfully. Opened bootloader using inside terminal and installing proper aboot. Then without restart i also flashed proper TWRP usning Twrp manager and after clicking reboot bang...
Click to expand...
Click to collapse
Use this guide from one of the XDAmembers. Hope you get your phone get fixed soon.
https://forum.xda-developers.com/lg-l90/general/guide-unbrick-hard-bricked-l90-variants-t3173429
Hi everyone!
Well guys, sorry to bring this subject on thread again (because this forum has a lot of guides to solve this problem).
But I'm without hope with my phone at this moment.
Let me tell you guys my sad story...
I have an Oneplus 6 since december 2018, and never, NEVER, tried to use any modification on my phone.
I am from Brazil (so sorry for my bad english =] ), and here we CANNOT use Oneplus Support services (I've tried but only received the response "sorry I cannot help you on your country"), so because of this, I've decided to never apply any modification to avoid problems.
This week after a simple reboot my OP6 started with "Qualcomm CrashDump" error and my despair begins.
I'm not able to enter on Fastboot Mode. When I try, the systems attempt to boot (the fastboot mode logo appears) and fall down into crash again.
I'm not able to enter on Recovery Mode either. This method shows nothing, only black screen and after some time the crash screen comes again.
I do not have Bootloader unlocked too.
Any suggestion to use TWRP via fastboot.exe or ADB are useless, because I cant make the connection. At least I think that is impossible because the 'adb devices' command does not find the device.
I followed a lot of guides from XDA to solve my problem, including the Mega Unbrick Thread.
I already downloaded at least 8 different versions of msmdownloadtool in consecutive attempts of unbrick my phone. Nothing really helps.
The most weird situation is that msmDownlodTool can finish the proccess with success. The driver installation is working... everything seens OK using the tool but my phone does not revive
Someone have a suggestion for me?
Any suggestion, tool or alternative method is welcome in my actual situation.
Sorry if I posted at wrong local, just tell me and I can fix if necessary.
Thanks in advance to all of you guys.
Did you try msm download tool? If not, nead that thread and good luck
whizeguy said:
Did you try msm download tool? If not, nead that thread and good luck
Click to expand...
Click to collapse
Hi!
Thanks for your reply, but I think you do not read my entire post
As I said, i've already tried at least 8 different versions of msmDownloadTool.
If you have any other suggestion, I'll appreciate.
so you can't boot into fastbootmode anymore?
Had the same problem once before and solved it by flashing the correct twrp by fastboot
EarthquakeXS said:
so you can't boot into fastbootmode anymore?
Had the same problem once before and solved it by flashing the correct twrp by fastboot
Click to expand...
Click to collapse
Yes, I am unable to enter into Fastboot Mode.
When I try, the logo saying "fastboot" appears, but after 4 seconds, the systems stucks on CrashDump error screen again.
That way my PC cannot find my phone with ADB or FASTBOOT commands.
The only tool that works is msmDownloadTool, but even with a success run with that tool, my system does not start and stills under CrashDump error.
I was thinking if exists some version of msmDownloadTool that justs restore the fastboot and unlock bootloader with brute force.
Thats my last hope
hello. heres what u need to do. download miracle kraked version. hold volume+ and - key simultaneously.
go to device manager in pc. look for port expand it and u should see qualcomm Qloader.
now use miracle under qualcomm tab select patch and flash!!
sanaulla jauhar said:
hello. heres what u need to do. download miracle kraked version. hold volume+ and - key simultaneously.
go to device manager in pc. look for port expand it and u should see qualcomm Qloader.
now use miracle under qualcomm tab select patch and flash!!
Click to expand...
Click to collapse
Hi!
Can you please provide some link to this tool?
Thanks for your help!
mikesmarcos said:
Hi everyone!
Well guys, sorry to bring this subject on thread again (because this forum has a lot of guides to solve this problem).
But I'm without hope with my phone at this moment.
Let me tell you guys my sad story...
I have an Oneplus 6 since december 2018, and never, NEVER, tried to use any modification on my phone.
I am from Brazil (so sorry for my bad english =] ), and here we CANNOT use Oneplus Support services (I've tried but only received the response "sorry I cannot help you on your country"), so because of this, I've decided to never apply any modification to avoid problems.
This week after a simple reboot my OP6 started with "Qualcomm CrashDump" error and my despair begins.
I'm not able to enter on Fastboot Mode. When I try, the systems attempt to boot (the fastboot mode logo appears) and fall down into crash again.
I'm not able to enter on Recovery Mode either. This method shows nothing, only black screen and after some time the crash screen comes again.
I do not have Bootloader unlocked too.
Any suggestion to use TWRP via fastboot.exe or ADB are useless, because I cant make the connection. At least I think that is impossible because the 'adb devices' command does not find the device.
I followed a lot of guides from XDA to solve my problem, including the Mega Unbrick Thread.
I already downloaded at least 8 different versions of msmdownloadtool in consecutive attempts of unbrick my phone. Nothing really helps.
The most weird situation is that msmDownlodTool can finish the proccess with success. The driver installation is working... everything seens OK using the tool but my phone does not revive
Someone have a suggestion for me?
Any suggestion, tool or alternative method is welcome in my actual situation.
Sorry if I posted at wrong local, just tell me and I can fix if necessary.
Thanks in advance to all of you guys.
Click to expand...
Click to collapse
Hi there ! I am experiencing a similar issue on the same device. Did you manage to fix it ?
Hi dude are u here ? i will help u
Try this
Rhach1d237 said:
Hi there ! I am experiencing a similar issue on the same device. Did you manage to fix it ?
Click to expand...
Click to collapse
Source is a videotutorial. google oneplus 6 hardbrick and click the video of Max Lee
(it worked for me)
the download takes an awful lot of time
first get your phone into qualcomm download mode by holding down volume up + power button and plug your device in your PC.
(first unzip the hardbrick zip folder) then the oneplus 6 folder and than the .exe file and click 'start' if it detects your phone.
That is flashing every chip and Hydrogen OS 5.whatever.3 but that is not important. Your phone should boot and than you can install Oxygen OS with android 10(thats the other zip folder) using the local upgrade feature.
(make sure to enable google play services after upgrade from hydrogen OS)
Hope it will work for you too if you haven't tried it already.
Ok so I went to flash twrp recovery onto my phone and something went wrong while using oden... My usb debugging is turned on and OEM Unlocked. Now my phone screen stays completely black. Its caught in a bootloop and No buttons work to bring it back into download mode, Only Upload mode works.. But Odin will not flash anything to my phone in Upload mode. It changes my samsung usb drivers to msm upload or modem drivers. I have been at this for weeks trying to get my s8+ to attach to my computer again using ADB, ODIN, SD CARD, AND EVEN THAT JIG Thing to force it into download mode but TO NO AVAIL.. I Have to some how get back into download mode but no button combinations will work.. It seems to bootloop on me before it reaches those commands. The bootloader is obviously gone to a certain degree since upload mode still works.. Is there any way to use Odin in upload mode? Or is there any other way I can reflash stock rom to fix this issue? I have no recovery, no safe mode, no download mode?? My phone is basically a paper weight right now.. When I know All my stuff is still on there. This S8+ Phone has put up a good fight with me on my pc But Im not one to loose. I love a good challange.. Any suggestions. I thought ADB Was my best bet but with no connect I cant do any thing. I cant' get Adb to find my device. Oh even tryed older versions of odin with low level quallcom drivers and that didn't work either. Odin will read a com port to my device but i'm in the wrong mode (Upload Mode) and Odin cant establish a connection. When in Upload Mode its the hellish one as xda deveopers have said before..
S8+ phone is Model Number SM-G950U
Witch I believe has now been upgraded to SM-G955U OR F.. But I have the original stock rom still for SM-G950U if only I can get into some kind of Download Mode.
Ive even sat watching odin as I push every single button combination watching the ports appear and dissapear as it reboots trying to find some kind of way to download to the phone... But no luck..
UNKNOWN ERROR
DDR VENDER : UNKNOWN
SOC_HW_REVISION : 2.1
SKIP PRINT_SUMMERY_TO_LCD
GENERATING SUMMERY........
GENERAL INFO
DDR INFO
DCVS INFO
RPM INFO
RECOVERED FROM AN EXCEPTION
DONE
Then if I hold the up button for a few seconds I get this underneath
SYNCHRONOUS EXCEPTION
LR : 0x0000000085e36d98
sp : 0x000000001407bbb0
pc : 0x0000000085e36df8
Not sure what that means or how to look up those codes but I know its all bad.. If anyone can think of any other way to connect my phone to reflash stock rom to fix Please let me know any theories or suggestions you may have for me to try... Thank You...
Gkeplar said:
Ok so I went to flash twrp recovery onto my phone and something went wrong while using oden... My usb debugging is turned on and OEM Unlocked. Now my phone screen stays completely black. Its caught in a bootloop and No buttons work to bring it back into download mode, Only Upload mode works.. But Odin will not flash anything to my phone in Upload mode. It changes my samsung usb drivers to msm upload or modem drivers. I have been at this for weeks trying to get my s8+ to attach to my computer again using ADB, ODIN, SD CARD, AND EVEN THAT JIG Thing to force it into download mode but TO NO AVAIL.. I Have to some how get back into download mode but no button combinations will work.. It seems to bootloop on me before it reaches those commands. The bootloader is obviously gone to a certain degree since upload mode still works.. Is there any way to use Odin in upload mode? Or is there any other way I can reflash stock rom to fix this issue? I have no recovery, no safe mode, no download mode?? My phone is basically a paper weight right now.. When I know All my stuff is still on there. This S8+ Phone has put up a good fight with me on my pc But Im not one to loose. I love a good challange.. Any suggestions. I thought ADB Was my best bet but with no connect I cant do any thing. I cant' get Adb to find my device. Oh even tryed older versions of odin with low level quallcom drivers and that didn't work either. Odin will read a com port to my device but i'm in the wrong mode (Upload Mode) and Odin cant establish a connection. When in Upload Mode its the hellish one as xda deveopers have said before..
S8+ phone is Model Number SM-G950U
Witch I believe has now been upgraded to SM-G955U OR F.. But I have the original stock rom still for SM-G950U if only I can get into some kind of Download Mode.
Ive even sat watching odin as I push every single button combination watching the ports appear and dissapear as it reboots trying to find some kind of way to download to the phone... But no luck..
UNKNOWN ERROR
DDR VENDER : UNKNOWN
SOC_HW_REVISION : 2.1
SKIP PRINT_SUMMERY_TO_LCD
GENERATING SUMMERY........
GENERAL INFO
DDR INFO
DCVS INFO
RPM INFO
RECOVERED FROM AN EXCEPTION
DONE
Then if I hold the up button for a few seconds I get this underneath
SYNCHRONOUS EXCEPTION
LR : 0x0000000085e36d98
sp : 0x000000001407bbb0
pc : 0x0000000085e36df8
Not sure what that means or how to look up those codes but I know its all bad.. If anyone can think of any other way to connect my phone to reflash stock rom to fix Please let me know any theories or suggestions you may have for me to try... Thank You...
Click to expand...
Click to collapse
You have a 950 u locked bootloader. First mistake trying to flash twrp. Only option you have is finding the revision bootloader you where on edl files and pinout to 9008 edl mode. There as of last known no fix other than for upload mode only.
Thank You
TheMadScientist said:
You have a 950 u locked bootloader. First mistake trying to flash twrp. Only option you have is finding the revision bootloader you where on edl files and pinout to 9008 edl mode. There as of last known no fix other than for upload mode only.
Click to expand...
Click to collapse
Thank You I will try that And reply back with results
Gkeplar said:
Thank You I will try that And reply back with results
Click to expand...
Click to collapse
What revision bootloader was it on? I have several of them but not all
TheMadScientist said:
What revision bootloader was it on? I have several of them but not all
Click to expand...
Click to collapse
It was on its original bootloader for the Samsung Galaxy S8+ SM-G950U. It was SnapDragon bootloader
TheMadScientist said:
What revision bootloader was it on? I have several of them but not all
Click to expand...
Click to collapse
I'm working on reading this thread now trying to follow there instructions, https://forum.xda-developers.com/galaxy-s8/help/s8-g950u-hardbrick-t3668572
Gkeplar said:
It was on its original bootloader for the Samsung Galaxy S8+ SM-G950U. It was SnapDragon bootloader
Click to expand...
Click to collapse
Mate there are 7 different revisions of the 950 u bootloader. Across all the software updates. No offense intended. But if you can't even give this little bit of info I can assure you. Your not gonna be able to dissemble this device. Ground out the test points to enter edl. And flash needed repair files. Which is very tedious. If there is any issues. I would mark this device as lost and get another. I dont feel that you have the necessary skills needed to complete this process...
---------- Post added at 10:49 PM ---------- Previous post was at 10:38 PM ----------
Gkeplar said:
I'm working on reading this thread now trying to follow there instructions, https://forum.xda-developers.com/galaxy-s8/help/s8-g950u-hardbrick-t3668572
Click to expand...
Click to collapse
Unless you are on revision 2 bootloader that is no use to you
---------- Post added at 10:51 PM ---------- Previous post was at 10:49 PM ----------
Gkeplar said:
I'm working on reading this thread now trying to follow there instructions, https://forum.xda-developers.com/galaxy-s8/help/s8-g950u-hardbrick-t3668572
Click to expand...
Click to collapse
Unless you are on revision 2 bootloader that is no use to you
You are not in edl mode. You are stuck in upload. The only way to get to edl mode is disassemble the device flip the motherboard upside down while hooked up. Ground out a test pin on the mother board while connecting the usb cable.