Related
I had the can't mount sdcard issue on my tablet
I read somewhere that you can - erase the command system -. and so on. The boot-related files would be preserved
Unfortunately I have now only the acer logo and the boot loader on the screen.
When I press power and volume, nothing happens. Is there any possibility to rescue the Tablet?
I can just connecting and sending commands via usb and aio toolbox.
Please help me, my records from the study are in this tablet.
OK, lets summerize:
Tablet Acer 510
something happen - what does you've done?
I can just connecting and sending commands via usb and aio toolbox.
Click to expand...
Click to collapse
What is the AIO Toolbox? I didn't know....
If you've connect the Tablet on the PC, could the PC know the Tablet? Does you've access to the Tablett via adb ? Does the Tablett stopped at this point or it is in a reboot loop?
If you've an access via adb, you have the possibility
a) safe you work on PC
b) restore the 3 *.img on your tablett
If you need the 3 img files, I can give you a link of my 3 files (after root and NO-AD installation)
I tried this
Yes i can connect to pc by manipulating the lock screen button while starting with volume and power button.
Then i can send commands like this "fastboot oem unlock" or this "fastboot flash recovery recovery_nothrills.img"
I tried to send the nothrills image again, and it accepts the image and says image receyved but doesn't help.
Please can you mention what i have to do now.
Did you get my private message
Isn't it possible to mount the sdcard in ADB, and then pull the files you need?
In that way you have your records back and you can flash stuff without the fear of losing your files.
farris said:
Isn't it possible to mount the sdcard in ADB, and then pull the files you need?
In that way you have your records back and you can flash stuff without the fear of losing your files.
Click to expand...
Click to collapse
I can connecting via acer fastboot interface
Please can you tell me how is the command to connect sdcard in adb mode and where cani get the files and where have i need to drop it
Sorry, iam a very beginner
Can i push files in acer fastboot interface mode
I think i'd erased the bootfiles for the bootloader of nothrills boot image
i can just connect in fastboot interface mode and can sending commands
From what I have gathered on your thread on the other board you have erased your /sdcard partition
I believe CWM needs /sdcard (If I remember right, it says something to this effect when booting to CWM)
1) Try to flash the stock recovery from NoThrill's thread http://forum.xda-developers.com/showthread.php?t=1866378
2) put a stock ROM on an external SD card (rename to update.zip) http://forum.xda-developers.com/showthread.php?t=1897791
3) boot into recovery
4) keep your fingers crossed that it will install
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Alle Rechte vorbehalten.
D:\eigene Dateien\Downloads\ACER_AIO_TOOLBOX_v2.3.0\ACER_AIO_TOOLBOX_v2.3.0>
D:\eigene Dateien\Downloads\ACER_AIO_TOOLBOX_v2.3.0\ACER_AIO_TOOLBOX_v2.3.0>
D:\eigene Dateien\Downloads\ACER_AIO_TOOLBOX_v2.3.0\ACER_AIO_TOOLBOX_v2.3.0>fast
boot flash recovery boot.img
sending 'recovery' (3970 KB)... OKAY [ 1.275s]
writing 'recovery'... OKAY [ 1.410s]
finished. total time: 2.686s
D:\eigene Dateien\Downloads\ACER_AIO_TOOLBOX_v2.3.0\ACER_AIO_TOOLBOX_v2.3.0>fast
boot reboot
rebooting...
finished. total time: 0.427s
D:\eigene Dateien\Downloads\ACER_AIO_TOOLBOX_v2.3.0\ACER_AIO_TOOLBOX_v2.3.0>
i tried what you mentioned, unfortunately no success.
ercuem said:
Can i push files in acer fastboot interface mode
I think i'd erased the bootfiles for the bootloader of nothrills boot image
i can just connect in fastboot interface mode and can sending commands
Click to expand...
Click to collapse
Should be:
fastboot flash boot [file]
---------- Post added at 06:26 PM ---------- Previous post was at 06:24 PM ----------
ercuem said:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Alle Rechte vorbehalten.
D:\eigene Dateien\Downloads\ACER_AIO_TOOLBOX_v2.3.0\ACER_AIO_TOOLBOX_v2.3.0>
D:\eigene Dateien\Downloads\ACER_AIO_TOOLBOX_v2.3.0\ACER_AIO_TOOLBOX_v2.3.0>
D:\eigene Dateien\Downloads\ACER_AIO_TOOLBOX_v2.3.0\ACER_AIO_TOOLBOX_v2.3.0>fast
boot flash recovery boot.img
sending 'recovery' (3970 KB)... OKAY [ 1.275s]
writing 'recovery'... OKAY [ 1.410s]
finished. total time: 2.686s
D:\eigene Dateien\Downloads\ACER_AIO_TOOLBOX_v2.3.0\ACER_AIO_TOOLBOX_v2.3.0>fast
boot reboot
rebooting...
finished. total time: 0.427s
D:\eigene Dateien\Downloads\ACER_AIO_TOOLBOX_v2.3.0\ACER_AIO_TOOLBOX_v2.3.0>
i tried what you mentioned, unfortunately no success.
Click to expand...
Click to collapse
Where did it go wrong?
Did you boot to recovery? (Vol- + power)
YEAH
a little success
I put updare.zip on external sd
Used this command "fastboot flash boot boot.img "This is the stock kernel of nothrill"
And now i got:
erasing cache before sd update...
sd update command: recovery
update package=sdcard: update.zip
Booting recovery kernel image
Now it stays on this state until 7 minutes an nothing happens
What boot.img did you flash?
Randomwalker said:
What boot.img did you flash?
Click to expand...
Click to collapse
This one
http://forum.xda-developers.com/showpost.php?p=31137321&postcount=1
Are you having issues with the ThrillsKernel (freezes, reboots, etc.)? Download the Acer kernel below:
Acer original kernel (mirror) (mirror)
(MD5 for the .ZIP file: b6e4f3fed3c96468ee25a0c3a8925433)
Flash this from the Recovery and wipe dalvik-cache. Note: This Acer kernel will only work with the ROM in this thread, do not attempt to use it on other ROMs!
In this zip is a boot.img and a directory called Meta.inf
OK, so that would be a stock kernel.
Can you try to flash the whole ROM via fastboot?
- copy the update.zip to your fastboot directory
- fastboot update update.zip
Randomwalker said:
OK, so that would be a stock kernel.
Can you try to flash the whole ROM via fastboot?
- copy the update.zip to your fastboot directory
- fastboot update update.zip
Click to expand...
Click to collapse
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Alle Rechte vorbehalten.
D:\eigene Dateien\Downloads\ACER_AIO_TOOLBOX_v2.3.0\ACER_AIO_TOOLBOX_v2.3.0>
D:\eigene Dateien\Downloads\ACER_AIO_TOOLBOX_v2.3.0\ACER_AIO_TOOLBOX_v2.3.0>
D:\eigene Dateien\Downloads\ACER_AIO_TOOLBOX_v2.3.0\ACER_AIO_TOOLBOX_v2.3.0>fast
boot update update.zip
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
D:\eigene Dateien\Downloads\ACER_AIO_TOOLBOX_v2.3.0\ACER_AIO_TOOLBOX_v2.3.0>
I USED THIS STOCK ROM
OS_Acer_RV28.RC04.EMEA.DE_A40I_A.zip
But you did unzip it first, right? Not just renamed the download to update.zip?
Randomwalker said:
But you did unzip it first, right? Not just renamed the download to update.zip?
Click to expand...
Click to collapse
Yes unfortunately i'm getting the mentioned message.
Thank you for helping me
Yes unfortunately i'm getting the mentioned message.
Thank you for helping me
shall i try "fastboot boot recovery_nothrill.img?"
No worries, maybe someone more knowledgeable will come around . Unfortunately I no longer have an A510.
So, you currently are on stock recovery and it hangs after: "Booting recovery kernel image", right?
Maybe we really need to reconstruct /sdcard... but I have no idea how.
EDIT:
shall i try "fastboot boot recovery_nothrill.img"
Click to expand...
Click to collapse
Definitely, give it a go! I thought you already tried that.
Randomwalker said:
No worries, maybe someone more knowledgeable will come around . Unfortunately I no longer have an A510.
So, you currently are on stock recovery and it hangs after: "Booting recovery kernel image", right?
Maybe we really need to reconstruct /sdcard... but I have no idea how.
EDIT:
Definitely, give it a go! I thought you already tried that.
Click to expand...
Click to collapse
unfortunately no success, i got the same message:
erasing cache before sd update...
sd update command: recovery
update package=sdcard: update.zip
Booting recovery kernel image
Where can i get an update zip, which it will accept for update?
I got the exactly the same message as attached as jpg and pdf.
Hi
1.- I want to install a new Rom (Android 4.4.2 KitKat omniROM)
2.- But first I need to install TWRP (.blob), so I need to install and run a fastboot tool (Minimal adb/fastboot tool)
I unlocked the bootloader of the tablet
I install the fastboot
I install the drivers of the fastboot of the Asus
I copy the file.blob to the same folder of the fastboot
I open the fastboot and in the CMD I wrote ''fastboot devices'' and it find the Asus so in the screen was numers and letters like a code...but then I wrote the command Fastboot -i 0x0B05 flash recovery file.blob but then give an error (failed....(no such device or address))
I tried all to solve this problem but I cant.. so I need your help.
I tried:
■Reinstall fastboot tool
■Restart the tablet
■Use all the usb ports of the PC
■Reinstall drivers
■Used apps like SDK Manager
■Used other usb cable
luisldu said:
Hi
1.- I want to install a new Rom (Android 4.4.2 KitKat omniROM)
2.- But first I need to install TWRP (.blob), so I need to install and run a fastboot tool (Minimal adb/fastboot tool)
I unlocked the bootloader of the tablet
I install the fastboot
I install the drivers of the fastboot of the Asus
I copy the file.blob to the same folder of the fastboot
I open the fastboot and in the CMD I wrote ''fastboot devices'' and it find the Asus so in the screen was numers and letters like a code...but then I wrote the command Fastboot -i 0x0B05 flash recovery file.blob but then give an error (failed....(no such device or address))
I tried all to solve this problem but I cant.. so I need your help.
I tried:
■Reinstall fastboot tool
■Restart the tablet
■Use all the usb ports of the PC
■Reinstall drivers
■Used apps like SDK Manager
■Used other usb cable
Click to expand...
Click to collapse
Is your bootloader unlocked?
Edit: wait I read the op and it says you did unlock it..
Sent from my SM-N900T using XDA Free mobile app
---------- Post added at 07:28 PM ---------- Previous post was at 07:24 PM ----------
I'd say try to use a completely different USB or computer. If that doesn't work, you can actually flash it from the system itself if you have root. Can't remember the command. Give me a second.
Sent from my SM-N900T using XDA Free mobile app
---------- Post added at 07:31 PM ---------- Previous post was at 07:28 PM ----------
Are you on 4.2 bootloader?
Sent from my SM-N900T using XDA Free mobile app
---------- Post added at 07:39 PM ---------- Previous post was at 07:31 PM ----------
To install without using fastboot, download twrp, make sure its one of the newer twrps, I think 2.7 and above is required for KitKat, and..
[QUOTE/] Save it to the root of your /sdcard directly (internal memory only) and rename it to twrp.blob
Launch terminal emulator or connect to your computer and open an adb shell, then type the following:
su
dd if=/sdcard/twrp.blob of=/dev/block/mmcblk0p4
Then reboot to complete installation.
[/QUOTE]
Sent from my SM-N900T using XDA Free mobile app
Problem Solved!
andrewnelson23 said:
Is your bootloader unlocked?
Edit: wait I read the op and it says you did unlock it..
Sent from my SM-N900T using XDA Free mobile app
---------- Post added at 07:28 PM ---------- Previous post was at 07:24 PM ----------
I'd say try to use a completely different USB or computer. If that doesn't work, you can actually flash it from the system itself if you have root. Can't remember the command. Give me a second.
Sent from my SM-N900T using XDA Free mobile app
---------- Post added at 07:31 PM ---------- Previous post was at 07:28 PM ----------
Are you on 4.2 bootloader?
Click to expand...
Click to collapse
So, yesterday I clean the Asus Cable, the port of the pc and the port of tablet and finally works, so I flashed my tablet with TWRP recovery and the 4.4.4 omniROM Nightly.
The all problem was the cable and the ports.
:good:
Hey there I Rooted my phone and wanted to install TWRP from the app in the OS so I decided to proceeed after the boot it didnt work. Now its in Bootloop with NO OS and adb isnt working on CMD prompt . Fastboot&rescue works but tryn to flash TWRP keep saying "error : cannot open 'TWRP.IMG' . HELP! Been doing this for a week now and im losing hope. :crying:
Hi, please try the adb which I use
https://www.dropbox.com/sh/i9ei9vwqqenbbjg/AADufc2DmnMD4w8VUnbg8T16a?dl=0
Open py_cmd.exe
---------- Post added at 07:56 AM ---------- Previous post was at 07:53 AM ----------
If it work try follow the instruction at this thread
http://forum.xda-developers.com/med...e-to-to-b112-android-5-1-1-b205-b209-t3360043
You will need to download stick version, just search the forum for "firmware" and you'll find a thread
Good luck and let us know if it works
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:\Minimal ADB and Fastboot_techbeasts 2>adb devices
List of devices attached
N7M6R15605001207 offline
C:\Minimal ADB and Fastboot_techbeasts 2>
___________________________________________________________________________________________________________
Before used to say "Unauthorized" instead of "Offline"
What's with this situation now?
Tried the fastboot oem get_identifier_token and getting command unknown, OEM unlocking is checked in the developer options. anyone else seeing this? this is on a u11 life shipped from t-mobile..
tried Twinnfamous's suggestion using the htc fastboot from their dev site and got the same results...
C:\fastboot-win>dir
Volume in drive C has no label.
Volume Serial Number is 1211-9B14
Directory of C:\fastboot-win
11/11/2017 05:12 AM <DIR> .
11/11/2017 05:12 AM <DIR> ..
11/10/2017 01:39 PM 1,542,656 adb.exe
11/10/2017 01:39 PM 97,792 AdbWinApi.dll
11/10/2017 01:39 PM 62,976 AdbWinUsbApi.dll
11/11/2017 05:10 AM 183,651 fastboot.exe
11/11/2017 05:10 AM <DIR> __MACOSX
4 File(s) 1,887,075 bytes
3 Dir(s) 99,885,707,264 bytes free
C:\fastboot-win>fastboot devices
HT7AL1C00XXX fastboot
C:\fastboot-win>fastboot oem get_identifier_token
...
FAILED (remote: unknown command)
finished. total time: 0.001s
tjablonowski said:
Tried the fastboot oem get_identifier_token and getting command unknown, OEM unlocking is checked in the developer options. anyone else seeing this? this is on a u11 life shipped from t-mobile..
tried Twinnfamous's suggestion using the htc fastboot from their dev site and got the same results...
C:\fastboot-win>dir
Volume in drive C has no label.
Volume Serial Number is 1211-9B14
Directory of C:\fastboot-win
11/11/2017 05:12 AM <DIR> .
11/11/2017 05:12 AM <DIR> ..
11/10/2017 01:39 PM 1,542,656 adb.exe
11/10/2017 01:39 PM 97,792 AdbWinApi.dll
11/10/2017 01:39 PM 62,976 AdbWinUsbApi.dll
11/11/2017 05:10 AM 183,651 fastboot.exe
11/11/2017 05:10 AM <DIR> __MACOSX
4 File(s) 1,887,075 bytes
3 Dir(s) 99,885,707,264 bytes free
C:\fastboot-win>fastboot devices
HT7AL1C00XXX fastboot
C:\fastboot-win>fastboot oem get_identifier_token
...
FAILED (remote: unknown command)
finished. total time: 0.001s
Click to expand...
Click to collapse
Setting up the directory is always a ***** - I always found it easiest to open a command prompt in that folder so you don't need to type the directory first. I'm not sure what version of Windows you are running (if it's Windows at all) but here are some instructions for one version. I believe last I checked it changed but let me know if it helps. https://www.onmsft.com/news/open-command-prompt-specific-windows-10-file-directory
windows 10 fall creator edition... Appears that "adb devices", " adb reboot bootloader" and "fastboot devices" works and returns the correct information..
tjablonowski said:
Tried the fastboot oem get_identifier_token and getting command unknown, OEM unlocking is checked in the developer options. anyone else seeing this? this is on a u11 life shipped from t-mobile..
tried Twinnfamous's suggestion using the htc fastboot from their dev site and got the same results...
C:\fastboot-win>dir
Volume in drive C has no label.
Volume Serial Number is 1211-9B14
Directory of C:\fastboot-win
11/11/2017 05:12 AM <DIR> .
11/11/2017 05:12 AM <DIR> ..
11/10/2017 01:39 PM 1,542,656 adb.exe
11/10/2017 01:39 PM 97,792 AdbWinApi.dll
11/10/2017 01:39 PM 62,976 AdbWinUsbApi.dll
11/11/2017 05:10 AM 183,651 fastboot.exe
11/11/2017 05:10 AM <DIR> __MACOSX
4 File(s) 1,887,075 bytes
3 Dir(s) 99,885,707,264 bytes free
C:\fastboot-win>fastboot devices
HT7AL1C00XXX fastboot
C:\fastboot-win>fastboot oem get_identifier_token
...
FAILED (remote: unknown command)
finished. total time: 0.001s
Click to expand...
Click to collapse
I just make a new folder put fastboot in the folder then hold shift and click right click then menu will show option to open command window here. Then fastboot devices then the other commands once it shows.
Another thing I do is install HTC sync then uninstall it after it installs htc driver installer. Are u trying what I'm mentioning?
have done both of those, still no joy...
tjablonowski said:
have done both of those, still no joy...
Click to expand...
Click to collapse
what mode are u in when trying? U need to be in download mode
shows the last time I touched a HTC model, the download mode worked. Always have to be different I guess...Tks
tjablonowski said:
shows the last time I touched a HTC model, the download mode worked. Always have to be different I guess...Tks
Click to expand...
Click to collapse
Yea they switched it up around the m9. Happy u got it done.
U11 life has Android One system, not HTC Android. Maybe, the treatment for this phone series is different from U11?
dieterhaack said:
U11 life has Android One system, not HTC Android. Maybe, the treatment for this phone series is different from U11?
Click to expand...
Click to collapse
There's 2 versions 1 with sense and the Android one version
Once I enter the token request, it just says waiting for device, and nothing else happens.
jdmjunkee7 said:
Once I enter the token request, it just says waiting for device, and nothing else happens.
Click to expand...
Click to collapse
Are you in download mode? What operating system are you using? Be specific to get help faster.
Yes im in download mode. Android 7.1.1. Ive checked the option in developer mode for allowing unlocking.
jdmjunkee7 said:
Yes im in download mode. Android 7.1.1. Ive checked the option in developer mode for allowing unlocking.
Click to expand...
Click to collapse
Are u on windows 10 or Linux? Do u have the drivers installed is adb debugging turned on as well?
I'm running windows 10 and adb debugging is on as well. as far as I know the drivers are installed. I installed sync manager and everything.
jdmjunkee7 said:
I'm running windows 10 and adb debugging is on as well. as far as I know the drivers are installed. I installed sync manager and everything.
Click to expand...
Click to collapse
Did you install fastboot/adb?
jdmjunkee7 said:
I'm running windows 10 and adb debugging is on as well. as far as I know the drivers are installed. I installed sync manager and everything.
Click to expand...
Click to collapse
I always uninstall sync and just keep the HTC drivers installer in programs. Are you using powershell because I always use cmd
jdmjunkee7 said:
I'm running windows 10 and adb debugging is on as well. as far as I know the drivers are installed. I installed sync manager and everything.
Click to expand...
Click to collapse
Unzip the files then use cmd and cd /the folder here
Then type fastboot devices while in download mode and if it shows. fastboot with the numbers then your good to go. Or while booted u can do adb devices and it will show if your connected. I do know that on my Asus I can only get fastboot and adb to work on the 2.0 USB port it never connects on my 3.0 ports. I hope this gets u squared away. Report back your findings as it may help others that have the same issue.
So, I think I've managed to salvage my bricked Stylo, I somehow also managed to root my Fiance's LG G Stylo that's on the 6.0 update... this is a guide on how to flash a TWRP Recovery I made of a rooted LG G Stylo that is running Android 6.0 This can get you out of a brick or just give your spare phone root access.
Since I can't find any ways to fix this problem on the internet I'll post what I did here so hopefully I can get some other people out of deep water with their phone.
Stylo.zip
I'm going to assume that if you are following these instructions you have already downloaded and extracted the .zip file named Stylo onto your desktop.
All of these files are in the Stylo folder, so you should only have to download Stylo.zip
Minimal ADB & Fastboot installer
LG Phone Drivers
TWRP Backup file
recovery.img
1. Install minimal_adb_fastboot_v1.4.1_setup into the folder you extracted Stylo.zip in
(Install PhoneDrivers if you have not already)
2. Enable USB Debugging on your phone
(If you are boot looping, you should still be able to boot into the bootloader with
minimal adb fastboot just plug it in and let it do it's bootloop while you try
booting into the bootloader really quick, this may take some trial and error)
3. Launch MAF32.exe
(This is Minimal ADB and Fastboot)
4. In the window that pops up type:
adb devices
It should look like this:
PS C:\Users\Hyperion\Desktop\Stylo> adb devices
List of devices attached
LGMS6318bb1ce9a device
5. Next you will need to type:
adb reboot bootloader
Now, the powershell screen should look like this:
PS C:\Users\Hyperion\Desktop\Stylo> adb devices
List of devices attached
LGMS6318bb1ce9a device
PS C:\Users\Hyperion\Desktop\Stylo> adb reboot bootloader
PS C:\Users\Hyperion\Desktop\Stylo>
6. Once you are in the bootloader type:
fastboot boot recovery.img
(If you opened the PowerShell window by holding shift and using the right click menu,
the recovery.img file should load on its own, your PowerShell window should now look something like this)
PS C:\Users\Hyperion\Desktop\Stylo> adb devices
List of devices attached
LGMS6318bb1ce9a device
PS C:\Users\Hyperion\Desktop\Stylo> adb reboot bootloader
PS C:\Users\Hyperion\Desktop\Stylo> fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 0.367s]
booting...
OKAY [ 0.011s]
finished. total time: 0.380s
finished. total time: 0.379s
PS C:\Users\Hyperion\Desktop\Stylo>
7. Once TWRP boots up on your device you will need to navigate to Backup
Uncheck everything but boot
Start the backup process
(We are making a backup of boot
so we can take the name of the folder
it makes in /sdcard/TWRP/BACKUPS
and copy/paste that to the rooted backup file.
TWRP will create a backup of your
boot animation that contains your PHONE ID #
In my case it created a file named LGMS6318bb1ce9a )
8. Open your sdcard contents on your computer
navigate to /sdcard/TWRP/BACKUPS
Copy the name of the new folder that was created (Mine is LGMS6318bb1ce9a)
Open the Stylo folder on your Desktop \Desktop\Stylo\TWRP\BACKUPS
Paste the new folder name over the folder titled (Paste Here)
Overwrite the folder in /sdcard/TWRP/BACKUPS that contains
the boot animation with the new folder from \Desktop\Stylo\TWRP\BACKUPS
9. If you are not in TWRP on your phone any more, repeat steps 3. - 6.
10. Once in TWRP click WIPE in the top right, and Swype to Factory Reset
(Unless your backup file is being loaded from Internal Storage)
11. Navigate to RESTORE in TWRP, find your Backup file in the /TWRP/BACKUPS directory
LEAVE EVERYTHING CHECKED!
(If you uncheck anything the phone will not be rooted upon restore of the backup)
(Alternatively you can uncheck Data and have a fresh install of 6.0 with no root.)
The rooted backup should be installing 4144mb worth of data.
I left a few apps on the desktop that I figured would help some people out
Hope this worked for you, getting root on these phones is a *****.
-Mike
Screenshots were taken after the first boot of the Recovered device
Hardware Info
Software Info
Root Check
Can't make it past adb reboot bootloader, phone goes into a unlock mode and freezes up
I know a site that has the QFIL files necessary to actually unbrick a hard bricked Stylo H631. I'm not sure if I'm allowed to link them ..but I will tell you they charge 11.99USD. I'm hoping to have the $ to do it Friday...if I can...I'll give it a try and post findings here
Sent from my ROOTED LG-TP260 Thanks to Messi yet again!!!
SoonersChuck said:
I know a site that has the QFIL files necessary to actually unbrick a hard bricked Stylo H631. I'm not sure if I'm allowed to link them ..but I will tell you they charge 11.99USD. I'm hoping to have the $ to do it Friday...if I can...I'll give it a try and post findings here
Sent from my ROOTED LG-TP260 Thanks to Messi yet again!!!
Click to expand...
Click to collapse
I'm still waiting from someone in the comments from that site to confirm it's not a scam.
I need to find out the pin test spots on the h631/ms631... anyone know of a diagram or schematic floating around??? If so, I may have this figured out...don't want to poke around on my only board and make it completely useless
SoonersChuck said:
I need to find out the pin test spots on the h631/ms631... anyone know of a diagram or schematic floating around??? If so, I may have this figured out...don't want to poke around on my only board and make it completely useless
Click to expand...
Click to collapse
You mean a diagram of the emmc?
Anything that shows me where to touch to get the desired reaction
---------- Post added at 08:50 PM ---------- Previous post was at 08:49 PM ----------
Clk Dat0 gnd...those spots
When i type "fastboot boot recovery.img" in command prompt it comes up with a message saying "cannot load 'recovery.img': No such file or directory". Can someone help? The recovery file is on my desktop
---------- Post added at 11:56 PM ---------- Previous post was at 11:07 PM ----------
fixed my earlier issue but now when my device loads TWRP and i select to back up "boot", it fails.
---------- Post added 19th March 2018 at 12:44 AM ---------- Previous post was 18th March 2018 at 11:56 PM ----------
how do i open the sdcard contents on my computer?
trejose said:
When i type "fastboot boot recovery.img" in command prompt it comes up with a message saying "cannot load 'recovery.img': No such file or directory". Can someone help? The recovery file is on my desktop
---------- Post added at 11:56 PM ---------- Previous post was at 11:07 PM ----------
fixed my earlier issue but now when my device loads TWRP and i select to back up "boot", it fails.
---------- Post added 19th March 2018 at 12:44 AM ---------- Previous post was 18th March 2018 at 11:56 PM ----------
how do i open the sdcard contents on my computer?
Click to expand...
Click to collapse
ya gotta check all the boxes possible after going into the MOUNT options when in TWRP. always before doing almost anything in TWRP. sometimes its persistant, sometimes not depending on device.
---------- Post added at 08:15 AM ---------- Previous post was at 08:09 AM ----------
trejose said:
When i type "fastboot boot recovery.img" in command prompt it comes up with a message saying "cannot load 'recovery.img': No such file or directory". Can someone help? The recovery file is on my desktop
---------- Post added at 11:56 PM ---------- Previous post was at 11:07 PM ----------
fixed my earlier issue but now when my device loads TWRP and i select to back up "boot", it fails.
---------- Post added 19th March 2018 at 12:44 AM ---------- Previous post was 18th March 2018 at 11:56 PM ----------
how do i open the sdcard contents on my computer?
Click to expand...
Click to collapse
Enable MTP in the MOUNT options while in TWRP
I can't seem to get my T-Mobile Stylo 5 to go into fastboot mode. Adb reboot bootloader just reboots the phone for me. Maybe a downgrade is required?? Also I just used platform-tools adb and fastboot. Build# PKQ1.190302.001