Hello, faced with this problem, install the virtual reality "cardboard" in the demo mode, the picture is shaking constantly, even when the phone is motionless, spent a few tests of the gyroscope is it shows fluctuations in the service center changed completely charge with all sensors, the problem persists, I understand the problem of the entire line, and probably software, somebody can help solve the problem?
Yup, my Cardboard is useless too. I guess the problem is quite similar to what Moto G users have been experiencing - both devices use a Bosch gyroscope.
Hello , I had the same problem and tried lots of solution and it was only fixed when I flashed Marshmallow ROM from "http://forum.xda-developers.com/idol-3/development/rom-firmware-android-6-0-marshmallow-t3398038"
Related
Many people have the same problem as I do with xperia l. Any game which uses dual joysticks or both fingers for movement and aim will cause each other to be affected such as suddenly stop moving and such even though the multi touch test shows nothing wrong. Now after researching, the only solutions I found for 4.2.2 with latest official firmware (which is what I have) are;
1) downgrade to 4.1.2 (which I'm not a fan of)
2) you can't due to the hardware (which I doubt because some people don't have the problem but I don't know what they're running)
Now I want to clarify for certain what is a proper fix for this. The OI gaming rom or something said it fixed the multi touch problem but is it the problem I have or the old buggy problem where you couldn't even use both your fingers at the same time?
Can someone just tell me that if I flash a custom rom, will the problem still persist? Or is it truly a hardware problem?
hardware problem.
Tyrano71 said:
Can someone just tell me that if I flash a custom rom, will the problem still persist? Or is it truly a hardware problem?
Click to expand...
Click to collapse
It is a hardware problem...
Latest stock firmware (.17) seems to tone it down a bit. Its still there.....but much,much better then previous firmware.
(and i dont know what are you talking about 4.1.2 because the multitouch is 10x worse there)
Im on stock .17 and i can finnaly play FPS games just fine with minor multitouch issues....
And no....custom roms wont help.
If this is a hardware issue, is it possible to use a joystick instead? I haven't seen anyone test this. And all I have is one of them usb controllers but there are apps that allows it to be a usable android joystick. My only problem is that it emulates the touches, would it be affected by the hardware issues?
I've just received my new LG yesterday and I noticed the camera focus not working probably, i thought the 20f update would fix it, but it didn't, I've searched online for the most common ways to fix this issue and non worked, the focus issue is also in all the camera apps that i installed.
Sadly I don't live in the US , so does anyone know a fix that doesn't require hardware fixing?
Hi folks, I have been facing a bit of an issue in using Navigation on Maps. I have reason to believe this is happening in mostly OPO devices ONLY! A friend who also owns a OPO reported similar issue. While using Maps Navigation I have noticed that the pointer doesn't move along or update as I proceed in a given route. This is happening even when GPS is ON and set to High Accuracy and proper data coverage. I would like to know if anyone faced or is facing this issue? What is the solution? Thanks.
COS: 12.0-YNG1TAS2I3
Android: 5.0.2
Google Maps: 9.14.0
i have the same issue. the little blue pointer doesn't follow you and after awhile, it says gps signal lost. however, it still give you a turn by turn if you touch the bottom part. I really need this to work because of my job need. anyone have a fix for this? I think this only happen after the newest update about a week ago
I don't think that this is related to the One Plus One specifically. It is happening on at least 2 or 3 different devices that I have tested it on.
Does anyone have the apk for the previous version of google maps so that we can re-test?
Edit ..... Try this one and see if it sorts out your issue.
http://www.apkmirror.com/apk/google-inc/maps/maps-9-13-0-913011223-android-apk-download/
Last days I started to setup my new Nvidia Shield K1. I like to use tis for flying a DJI Mavic Pro and rely on functioning sensors. I also have installed AndroSensor and GPS Status. If I start one of this Apps the ACC sensor is working for a seconds and then the signals are completely freezing. After this I only get it back to work after and complete reboot of the Tablet. Also the Gyro and the Mag sensor does not look to be working at all. I have never seen any data on this. AndroSensor is waiting for an event for this two sensors and GPS Status shows some initial movement on the level sensor but never any reaction on the compass. Sometimes I even seen the orientation is not working anymore and the screen will not adjust anymore. In most of the cases the orientation is still working even with the frozen sensor output in the two Apps. Im using this two apps with a few of my other Android devices without having issues. My actual version is Android 6.0.1 with Shield software 1.5(24.3.70.8). I already have done a complete factory reset but after this the problem is the same. Any feedback is appreciated. I may need to RMA the device.
I got an replacement K1 yesterday and set it up again. With stock Android version all sensors are working fine for a day. Than i made the OTA update to latest (same as above). Now ACC and Gyro is still working but not the MAG. The problem looks to be at least partial related to the firmware. Mag sensor problems are reported also in the past for the K1 already. Also MAG calibration will not make any change. Androsensor is reporting "waiting for event" and GPS Status shows and wrong compass direction (was fine with the initial firmware before OTA). Not sure what can be done here. I was expecting when i invest in an tablet of an reputable vendor (which is also not very cheap) i get something working well. Now i either have a second bad tablet or there is still something wrong with the firmware. It would be good if someone with the latest OTA update can confirm this behavior or can confirm that everything is working as expected. Many thanks.
Here is some more information for the case: _https://forums.geforce.com/default/topic/986542/shield-tablet/sensors-gyro-acc-mag-work-in-an-erratic-way-on-my-new-k1-shield/?offset=7
hi guys
afret oreo updat my sensor is not working.
i tried a lot of way in web but not solved.
i guess this is general issue
what will we do?
Unless a hardware issues, a reboot usually solves the problem.
You may try factory reset also, but data will be lost.