I posted this question in the Nexus 10 section too but got no response and this isnt that device specific anyway so I decided to try my luck here.
I want to flash a recovery to my Nexus 10 but I can't get the fastboot drivers to install.
When I connect the tablet to my PC it installs these two drivers:
1. SAMSUNG Mobile USB Modem
2. SAMSUNG Mobile USB CDC Composite Device
I have no idea what these drivers have to do with fastboot whatsoever.. I tried to manually install the fastboot drivers but that won't work.
I searched for the hardware ID's on Google but that didn't result in anything.
Does anyone has a clue on what to do?
No one?
Related
I have a T-Mobile Nexus S that has a bootloop. Its my friends so I dont know what he did to it. I can get to the bootloader but when I connect it to my computer it won't recognize it. I thought of a driver problem but i can't get past the bootloop to enable usb debugging. It also won't show up in device manager. The phone's usb port works. It will still charge. I just need to get rid of the bootloop. Any help would be greatly appreciated. Thanks!
MAGnum_21 said:
I have a T-Mobile Nexus S that has a bootloop. Its my friends so I dont know what he did to it. I can get to the bootloader but when I connect it to my computer it won't recognize it. I thought of a driver problem but i can't get past the bootloop to enable usb debugging. It also won't show up in device manager. The phone's usb port works. It will still charge. I just need to get rid of the bootloop. Any help would be greatly appreciated. Thanks!
Click to expand...
Click to collapse
If it has a custom recovery, boot into it and wipe data/factory reset.
If it does not, flash a custom recovery. These forums are chockful on guides how to root, flash stuff and fix bootloops.
I looked up how to install recoveries but when i plug in my nexus to my computer it is not recognized. At the bottom of the bootloader screen it says "USB Control Init" and then "USB Control Init End". I do have the proper drivers installed. Is there a fix for this?
Are you sure that you have the correct drivers installed, though?
It's known that people who use Windows have a lot of success with the PDAnet drivers (you can search around here for those), rather then with the standard USB drivers the Google SDK provides.
Greetz
Did you try to run "fastboot devices" in command prompt while it's at fastboot mode and plugged into the PC? What do you see as the result? The guides on XDA should help, but you may also head over to nexusshacks_dot_com for more references.
Sent from my Nexus S using XDA App
With pdanet it requires me to plug in my phone with usb debugging turned on to get the drivers with i cant do because of the bootloop. and when i go into command prompt it says "waiting for device" and won't recognize it. Thanks for the help
I can't seem to get the fastboot usb drivers to install....i tried:
a) downloaded the asus android usb drivers but can't install manually because they won't do it on x64?!
b) installed asus pc sync (should install drivers also right?)
now i'm in fastboot usb download and when i connect the cable, it says USB device not recognized.
what can be done?
installed the SDK and now i see the device recognized in ADB, but i can't get it to be recognized in fastboot mode ???!!!!!! same error about unrecognized device...
// EDIT: WELL ****ING HELL, it was the USB port!!! I tried 3 of them (front panel) and same result
Switched to a backpanel port and it flashed TWRP straight away....
**** this, pls close thread.
Hi! I have a problem with the drivers in the flashtool. I installed all the drivers from the drivers folder, but when you connect your phone to install the firmware flashtool indicates that there is no driver.
Ps.In the Device Manager Universal Serial Bus Controller with an exclamation point next to the stamp.
Ps. I can not turn the phone apart recorvery mode
Ps. PC Companion tells the modified software or can it miss?
manually download and install adb drivers and fastboot drivers via android sdk...
if this doesnt help then...i had all the drivers installed separately like adb drivers from screen lag fix pack by dragoboss(look in apps and themes section) and usb drivers with pc companion. fastboot drivers via android sdk....still i installed drivers provided by flashtool never got any problem hope this helps hit thanks
USB Drivers are let your PC communicate with your device.
If you are executing some ADB Commands, you will need USB Drivers installed which will let the ADB server on your PC communicate with the ADB client on your device. If there are no USB Drivers installed on your PC, you will not be able to perform activities on your device via the PC.
First of All I would recommend you to install Universal ADB Driver Installer.The Universal ADB Driver installer detects your phone and installs the ADB drivers for it.This tool developed by drsmart is your solution to the “device not found” error you might get on executing ADB commands.
Universal ADB Driver Installer Download Link - http://adbdriver.com/downloads/
USB DRIVERS
1.SAMSUNG:
--- http://www.samsung.com/us/support/downloads
2.LG
---http://www.lg.com/us/support/mobile-support
3.HTC
---https://support.htc.com/en
4.SONY
---http://developer.sonymobile.com/downloads/drivers/
5.ASUS
---http://support.asus.com/download/options.aspx?SLanguage=en&type=1
6.MOTOROLA
---http://www.motorola.com/sites/motodev/us-en/motodev_lp.html
MORE DEVICES WILL BE UPDATED
Thanks for the info. I tried the univ adb driver installer but it showed I already had the right driver installed. Windows explorer can see my phone but other apps like HTC Sync or myphoneexplorer can't. This only happened after I rooted & installed a new rom. Maybe the rom is faulty...
I want Google nexus driver
any one can help me ?
mt6572 driver
Please add driver for mt6572 device
thx. very usefull!
thanks for the updated links.
Gole Maryam said:
I want Google nexus driver
any one can help me ?
Click to expand...
Click to collapse
an universal driver for all Nexus Devices (Phones and Tablets) can be found here:
http://forum.xda-developers.com/showthread.php?t=2513339
No access to USB debug
I give up and need some professional help...Ya both kinds.
Here we go, I have the Galaxy 3 d2att I747
Rooted
I was running CM 10.2 with latest nightly, I think 20131208 and decided to update to CM11 via my Cyanogenmod updater but before I did I had read somewhere I should change from CWM recovery to TWRP so I downloaded Goomanager and updated to the TWRP version for my phone then went for the KitKat update and thats when the trouble began.
I am now stuck in a boot loop even if I try to boot into TWRP all I get is the TWRP boot logo then straight into boot loop again. I am almost positive I did a factory wipe as well as cache/dalvik.
Not being able to use TWRP to get into recovery I thought I would just use Odin but I can't get any of my laptops to recognize the phones USB, I just get the windows usb driver error and have tried to install the drivers manually via device manager using my samsung 7 chronos with windows 8.1 and my acer with windows 7. I updated drivers using Samsung Kies and from the website, no luck.
I also ventured into an area that I have no expertise in but I guess thats how we learn so I downloaded the Android SDK thinking I could use it to download and install the google USB drivers that way, but I can't get out of boot loop to make sure USB debugging is checked. The only thing I can access is the stock download mode which would be great if I could use the USB connection.
What am I missing? Any suggestions?
USB Not Recognized Error
I noticed that my phone suddenly stopped being recognized on both my Windows 7 and Win8 laptops. I have been trying to fix it with the drivers but to no avail. However, I plugged my phone in with a different USB cord and voila it was recognized and working. Maybe this could possibly be a simple fix.
My computer stopped recognizing my Skyrocket
Hi Everyone,
I also am having trouble with my win 7 computer recognizing my Skyrocket suddenly. I have been using several KitKat roms and they have been working just fine, except for some reported bugs that the CM devs are working on. I even was able to connect to the computer and explore both my internal and external drives. Then suddenly that stopped and the computer gave me a need to get drivers warning. I've tried to download drivers from Samsung and the computer says they are already installed. I also tried the universal driver download and got the same message. Any help would be appreciated. Like the others on this forum, I wouldn't be able to odin if I got in trouble.
Thanks for your concideration,
drewfs7270
I switched to a different rom and now it's working again !
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Thanks.. :good: usefull
Also, any mobile manufacturer website has guides or direct downloads for drivers. Otherwise uni drivers suffice.....
Sent from my Nexus 5 using xda app-developers app
mtk preloader driver unable to install/unplugged appears
mt65xx unplugged when I try installing my device, I tried uninstalling all preloader vcom drivers in my laptop then restart and when I try to connect my device mtk mt65xx preloader just pops up in device manager then suddenly disappears and unknown device shows instead. I also tried manually update driver for unknown device then select the folder where my mtk driver is saved still unsuccessful? I've also searched and tried many other ways out there still no luck. Can anybody give me a solution? By the way i'm using windows 7 x64.
Delted
Edit: Deleted
soft brick
I face bad experienced, the tablet can not boot ( after install TWRP ) but enable to enter the fastboot mode and can be detected by the computer as android adb interface but adb can't communicated with the tablet. (list of devices atached)
I do have a backup file ( I make it before soft brick, I make backup using dd command, because I don't have cwm/twrp recovery ).... but how to flash it ? Tablet chipset is wonder media 8980 OS android 4.2.2
I can not flash it by adb/fastboot.
Maybe someone here can give me a little guide for how to....
I really appreciate for your kindness
Hey, I made an expirience, which might help other users as well.
I have a Sony device (Z1C) and use Windows 10, maybe this will help for other brands and for other Windows 10 users.
I installed drivers for my device and was able to use adb. When I put the phone into fastboot mode, it was not recognized anymore. I found out, Sony has a seperate (updated, maybe?) driver for fastboot mode. When I tried to install this, the driver was not signed and Windows refused to install it. However, you can enter the UEFI (successor of BIOS) and enable installation of unsigned drivers (at own risk). Then I was able to install the fastboot driver and controll my phone in fastboot mode as well as in adb mode.
In conclusion: You might think you installed drivers, because you did, but maybe you did not.
Even on LineageOS page, many people fail to mention that, you DON'T and SHOULDN'T install any generic or universal ADB driver if you have Samsung device. As you can just install Samsung USB Drivers officially from Samsung site. Samsung USB Drivers already contain ABD interface driver just fine so Universal ADB driver is redundant for Samsung phones.
I recently bought a YU YUPHORIA . When i tried to root it I was stuck at waiting for device. I checked on different forums and somehow everybody was telling about how the ADB drivers are not installed. I tried different methods . I tried to update the Android Composite ADB Interface as they had worked for a lot of other people but they didn't work with my phone. Then i tried to install ADB drivers with the help of Pdanet but the Pdanet was stuck at Trying to install Pdanet on your phone. When i write fastboot commands like fastboot -i 0x2A96 devices my device is recognised. But when i write adb devices my device doesn't show up. Please help because I really need to use this phone for app development purposes but Android Studio is also not recognising my device. I have managed to root my device but can't solve this problem of ADB not detecting my device.
Usb debugging is enabled and i Have tried uninstalling all android drivers . But then the android ADB interface is shown in other drivers with yellow mark and when i try to update it same thing happens "Window unable to install drivers"
Is their any hardware problem with my Device.?
suparv2204 said:
I recently bought a YU YUPHORIA . When i tried to root it I was stuck at waiting for device. I checked on different forums and somehow everybody was telling about how the ADB drivers are not installed. I tried different methods . I tried to update the Android Composite ADB Interface as they had worked for a lot of other people but they didn't work with my phone. Then i tried to install ADB drivers with the help of Pdanet but the Pdanet was stuck at Trying to install Pdanet on your phone. When i write fastboot commands like fastboot -i 0x2A96 devices my device is recognised. But when i write adb devices my device doesn't show up. Please help because I really need to use this phone for app development purposes but Android Studio is also not recognising my device. I have managed to root my device but can't solve this problem of ADB not detecting my device. Is their any hardware problem with my Device.
Click to expand...
Click to collapse
First, be sure you have enabled USB debugging in developer options. Also, you may have to uninstall all android drivers from your PC and then reinstall the specific drivers for your device.
Evolution_Tech said:
First, be sure you have enabled USB debugging in developer options. Also, you may have to uninstall all android drivers from your PC and then reinstall the specific drivers for your device.
Click to expand...
Click to collapse
Usb debugging is enabled and i Have tried uninstalling all android drivers . But then the android ADB interface is shown in other drivers with yellow mark and when i try to update it same thing happens "Window unable to install drivers"
suparv2204 said:
Usb debugging is enabled and i Have tried uninstalling all android drivers . But then the android ADB interface is shown in other drivers with yellow mark and when i try to update it same thing happens "Window unable to install drivers"
Click to expand...
Click to collapse
OK, try to update manually. Select update driver, then choose let me pick, then navigate to where you have the new driver.
Evolution_Tech said:
OK, try to update manually. Select update driver, then choose let me pick, then navigate to where you have the new driver.
Click to expand...
Click to collapse
I mentioned in the post I tried that . But windows shows the same message. I have tried with Google Usb drivers . I have also tried with other mobile drivers of Asus , Htc but same thing happens