Related
Hey all,
With great hesitancy I am asking this question, as I know people generally frown upon questions that has already been asked before. But I have searched on this forum and online and have not come across a solution for my particular device/problem. I own a Samsung Galaxy Note 10.1 GT-N8013 and decided to install the Omega custom ROM. I followed the instructions from DroidView's Omega installation webpage (sorry could not post link as this is my first post, but a google for Omega custom ROM galaxy note 10.1 would give the link).
After selecting the apps that I wanted installed, I tapped on the install button. I saw a bunch of "Wiping" output (preload/dalvik cache/cache) formating system. However, the installation bar is not moving past 0.00%. The screen is not frozen as I can see the color move from left to right in the installation bar, but bar itself is not moving. It has been like that for the past 1.5 hours during which I have been searching for a solution on what to do next. As the installation instructions suggested, I made backup of my current ROM on my external SD card. Preferably, I would like to try the installation process again, but I am not sure how to get out of this "installing" screen. If using a custom ROM is not possible for me, I would like to know how to go back to the stock ROM from the backup I made.
Any help is greatly appreciated. Also, I hope I am at the right place to ask this question, if not some please let me know.
Thanks,
Shaun.
Update:
After waiting for nearly 2 hours, I pressed the VolumeUP+Power button to get to the recovery menu to try to do the installation process again. It worked and I went through the whole procedure again. However, this time the screen froze at the "Select apps you want to install - Default install or remove bloatware" screen after I tapped on remove bloatware. I once again pressed VolumeUp+Power button to get back to the recovery mode.
Now all I see is my the "Samsung Galaxy Note 10.1" logo on my screen and it just sits there. If I press the power button long enough the device seems to turn off but the logo comes on back again on my screen. Does this mean I have bricked my device??? Is there way to get back to a working version of my tablet again?
Thanks,
Shaun.
Update:
I have gotten back on the recovery mode and restored the stock ROM. I am going to try to install the Omega custom ROM again. I will update here how it goes.
Sorry to have so many posts in a short while, I am not trying to bump my own posts. I am just trying to provide as much information as possible on the stuff that I have tried so that people who are kind enough to help me will know exactly what I have been upto. If this is a problem please let me know and I will tone down my posting frequency.
Thanks,
Shaun.
Which recovery r u using? Ive had good luck with twrp.
rail205 said:
Which recovery r u using? Ive had good luck with twrp.
Click to expand...
Click to collapse
I am using CWM 6.0.3.1. Forgive me, I new at this, but does this mean I need to root my tablet again and install a new recovery if I want to use this TWRP? Also, isnt the problem with Arora and not the recovery? Do you think changing the recovery will solve this problem?
Hi mate...
First., THIS is the Official thread of Omega for the Note 10.1... so please download the rom HERE to be sure..
Second., not all recoveries works with aroma., so i suggest you use Philz instead of cwm....
flash Philz first then flash Omega....
Installation Instructions can be found HERE..
NadMaj said:
Hi mate...
First., THIS is the Official thread of Omega for the Note 10.1... so please download the rom HERE to be sure..
Second., not all recoveries works with aroma., so i suggest you use Philz instead of cwm....
flash Philz first then flash Omega....
Installation Instructions can be found HERE..
Click to expand...
Click to collapse
Hey,
Thanks for your reply. I guess I am going for the philz_touch_5.08.5-n8000.zip. Also can just flash this directly from CWM just like any other zip?
I'm also guessing the backups from the recoveries are not compatible with each other.
shaun_android said:
Hey,
Thanks for your reply. I guess I am going for the philz_touch_5.08.5-n8000.zip. Also can just flash this directly from CWM just like any other zip?
I'm also guessing the backups from the recoveries are not compatible with each other.
Click to expand...
Click to collapse
yes.. you can also download the tar file and flash it via Odin/Mobile Odin..... then flash Omega and that's it...
for further questions regarding Omega you can ask in the Omega thread..
Update:
Thanks all for the help. I installed Philz and was able to install the Omega custom ROM on my galaxy note 10.1.
So I had a rooted Galaxy Tab 4 10.1 that I didn't have any backups for and I stupidly changed the DPI of the screen and rebooted the device and it started up in bootloop and I tried recovering it and nothing would work. So I finally settled on the wipe and factory reset, and now it starts up VERY SLOWLY, and the start of the set up for the device shows up but constantly I'm being bombarbed by TOUCHWIZUI has stopped working and 3 other things keep popping up saying they have stopped working. The touch screen barely works.
I have no idea what to do. I have no backups. I am not that familiar with android. I am downloading the stock firmware and am going to try to put it on with odin but I doubt it's going to work.
Can someone give me some advice on what to do? I would REALLY appreciate it.
Sincerely,
SalvelinuxFontinalix
BTW. The tab is the SM-T530NU Canadian (Wifi) version. The firmware I am downloading is the T530NUUEU1ANI1_T530NUXAC1ANI1...
Can I use ODIN to flash this firmware from my PC onto the device or will it be a huge problem if the tablet has been wiped and factory reset and is missing all sorts of information?
Your gonna need to flash the stock rom for the device.
Thank you for your guidance!
zelendel said:
Your gonna need to flash the stock rom for the device.
Click to expand...
Click to collapse
Thank you so much I did what you said. I found the stock rom and "flashed it" I got it back to exactly how it was when I got the tablet! I was unsure how to do it but I learned a bit on my own form the search feature of XDA. I found the stock rom out of a list of many different ones and I found the correct ROM for my country and area and flashed it on with ODIN using my PC and it rebooted and was brand new. I re-rooted it and decided not to alter the DPI of the screen. It's nice enough as is.
Thanks Again! Zelendel! You are a life safer! Oh and BTW...is using ODIN to transfer the stock ROM onto the device considered "flashing"? Or is there some other way people flash devices?
Thanks again I'm so thrilled I don't have a broken device haha. THANKS!!!
Sincerely,
SalvelinuxFontinalix
SalvelinuxFontinalis said:
Thank you so much I did what you said. I found the stock rom and "flashed it" I got it back to exactly how it was when I got the tablet! I was unsure how to do it but I learned a bit on my own form the search feature of XDA. I found the stock rom out of a list of many different ones and I found the correct ROM for my country and area and flashed it on with ODIN using my PC and it rebooted and was brand new. I re-rooted it and decided not to alter the DPI of the screen. It's nice enough as is.
Thanks Again! Zelendel! You are a life safer! Oh and BTW...is using ODIN to transfer the stock ROM onto the device considered "flashing"? Or is there some other way people flash devices?
Thanks again I'm so thrilled I don't have a broken device haha. THANKS!!!
Sincerely,
SalvelinuxFontinalix
Click to expand...
Click to collapse
Yes it is. There are other ways with custom recoveries but that is only for custom rom flashs
Welcome everyone!
This thread has been created for extreme newbies/noobs and for their benefit. Not only noobs, but everyone is free to post questions and also give answers to those questions. Any type of question is allowed as long as it is related about the device. No off-topic discussions are allowed!
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
Going back versions?
Ok, I'm pretty good on flashing ROMs and using TWRP. But I was thinking of trying a 5.1.1 Rom, I am rooted running just the stock Rom 6.01 currently. I have a SM-N900W8, so I assume I'll likely have to get the modem too depending on what ROM I choose.
My only concern is going backward, I don't know what kernel I might need to flash? Should be able to keep the answer simplistic in explanation, I just need the warnings and a basic checklist of what to do when going backward. And if I can complete this using just TWRP or whether I need to flash something with Odin or whether Flashfire might work.
Thanks in advance. Sorry I'm not a guy who has time to learn code. I try to donate if I'm going to use someone's work though. Just nice to have my phone run fast and smooth and be able to tinker...
Jetmerritt said:
Ok, I'm pretty good on flashing ROMs and using TWRP. But I was thinking of trying a 5.1.1 Rom, I am rooted running just the stock Rom 6.01 currently. I have a SM-N900W8, so I assume I'll likely have to get the modem too depending on what ROM I choose.
My only concern is going backward, I don't know what kernel I might need to flash? Should be able to keep the answer simplistic in explanation, I just need the warnings and a basic checklist of what to do when going backward. And if I can complete this using just TWRP or whether I need to flash something with Odin or whether Flashfire might work.
Thanks in advance. Sorry I'm not a guy who has time to learn code. I try to donate if I'm going to use someone's work though. Just nice to have my phone run fast and smooth and be able to tinker...
Click to expand...
Click to collapse
Hi
What do you mean by 'going backward'? Do you wanna downgrade your device from Marshmallow to Lollipop? If yes, refer to this thread.
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
Ok, if going back to a earlier version of Android, then flash the factory full ROM of that version through Odin, then flash custom ROM of same version. Got it, thanks. Sounds like the easiest way.
Jetmerritt said:
Ok, if going back to a earlier version of Android, then flash the factory full ROM of that version through Odin, then flash custom ROM of same version. Got it, thanks. Sounds like the easiest way.
Click to expand...
Click to collapse
Yeah. Welcome!
Regards,
PoseidonKing
Stuck N915G
Am using a N915G , it was rooted with CW recovery , since yesterday it would go in restart loop , so i went into recovery and did a reset , still the loop would not go , so i took into a service center they tries kies and it would intall lollipop but half way through it will show " erasing " and then go back to boot loop , now at this point when i re checked the phone there is no CW recovery , so i tried Odin with Marshmallow to flash the system , it shows PASS but during installation " System updating .. erasing " then goes back to reboot so i flashed new set of Pit files , but still the phone stays in boot loop , vibrates then goes off to loop , what am i doing wrong
Won't power on after normal power off.
Hi,
i mean; when i turn of the phone with normal shutdown menu, device power off normally.
But when i attempt to turn on device again, it won't turn on. nothing happens when i press or hold the power button.
only the way to turn on again, "plug a charge cable or usb cable"
after it detects the charge, and shows charging. after then i can turn on the device normal.
but, not possible to turn on without plug the cable once.
so; what can be my device's problem. (there is no another problem) except fast battery drain.
my opinion; humidity damage? or something like that.?
can any oxidation causes this problem?
please reply for help.
thanks.
Bump
Sent from my Motorola XT1080 using XDA Labs
Hello, I rooted my Samsung Galaxy Note Edge (N915T) Tmobile way back in 2014, I have since then forgot how to root again. I know that my phone is still rooted because I have SU.
My phone specs right now:
Bootloader: N915TUVU1ANJL
OS Version: KitKat 4.4.4
CPU: ARMv7-A (armeabi-v7a)
Kernel version: 3.10.0-2990579
I saw a post here in XDA about new Custom ROM (7.1.2 AOKP Nougat) and I would like to install custom ROM, and reading the instructions it states that it requires Bootloader 6.0.1 and Modem. I have no idea how to install bootloader and modem up to 6.0.1 on my phone. Kindly please guide me how to identify my current bootloader and how to upgrade up to 6.0.1. Thanks!
Hello,
I am using Odin v3.12.7 and I tried to select (twrp-3.0.2-0-tbltetmo.img) from Odin, but is not selectable because it does not have (.md5) or (.tar), where can I find a TWRP in those file formats?
What custom rom can i flush with my note edge sc-01g docomo japan,
Corrupt microsdcard and otg devices
Hi,
This is about my note edge N915G and what will follow has strangely happened with every kind of rom for the device stock rooted, aokp, customized stock, and slimroms.
What happens is
scard shows as corrupted after busybox/magisk7viper mods I mean the card is fine when I install busy box and magical and viper then in stall viper drivers and it is still good but when I reboot to activate the viper mods my card shows as corruption. I another thing that happens is when the card shows as corrupt, I I can try another card and still shows corrupt and strangely even the devices I connect through otg all show as corrupt. Ii think it is busy box which is needed for viper that does it, but am not sure.
Another guess is that maybe some embedded file on the phone has been deleted or corrupted and that is causing me the trouble. I have installed the Enhanced rom this evening and had set it up with closed root and magical. I it was all fine. I then I installed busy box using smart install and after that opened viper fx 2.5 and viper xhi=fi and each prompted to install drivers and they installed successfully and advised a reboot. It is after reboot that I opened my music player and found no songs which was be aise it is showing my card as corrupt. I strangely even if I reverse the process and uninstall viper drivers then viper apps and finally busybox it still does not change the status of the card. It is either that I install the rom again dirty or restore a system backup that was made while there were no add ons.
I would really appreciate if anyone can help figure this out as I do have the workaround of restoring system but it is tedious as I have to install all apps etc.
I would like to reiterate that this is not the kind of issue associated with Samsung phones in general where they are said to kill microsdcards. This is not the case and the card works flawlessly in a different phone which I did to check. My laptop too has no issues with same card it is a Samsung evo 64 gb card I'm using. Maybe they key is that even other as cards whether I put them in the card slot or in a card reader for otg it shows any card I use as corrupt and even my otg drives show up as corrupt. I think it is something I have never seen happening yet.
Thanks for reading this and for your suggestions and advice. I will look forward to your thoughts and inputs, knowledge and experience.
Regards
Centaur31
anybody install android 7 on note edge ?
please describe the method
i have been tried a lot to root the device but fail with error
in my phone in the developer setting there is no OEM unlock option
in all guide mentioned to this option
my phone model is: N915F
if possible please help me
At&t Samsung Note Edge N915A 6.0.1
Hi I'm a noob. Last phone I "jailbroke" was a IPhone 3gs. Could you link me in the right direction to root my Samsung note edge from At&t 6.0.1 a list of procedures would be great, also a list of downloads. Anything & Everything I need on my phone or my Laptop to complete the process. All input would be appreciated. I just paid a large chunk of $ to Samsung to have my screen replaced and I am the original owner of my device which I paid a lot of money for in 2014, so I would hate to brick my device. Thanks
Hello
I have Samsung Galaxy Note edge n915F and i want to to flash n915g stock rom in it
is it possible. .?
Or if possible any problem will occur. .?
Thanx in advance
Hi, total noob here. I flashed TWRP on my S6 and it's now stuck in a bootloop. I can access TWRP but can't get it to boot up normally. Any ideas please? If I flash a custom rom or even stock fireware via Odin is this likely to rectify it please? Thanks.
Just tried flashing magisk but no joy. When I try to reboot I get a message saying 'No OS installed! Are you sure you wish to reboot'
Does this mean the OS has somehow been damaged or wiped? Thanks.
Thanks for your reply but I don't understand any of that and it sounds way out of my technical ability. Looks like it's knackered as there's no way i can work out how to do the above - it's like a foreign language.
Is there an idiots guide or some other really straightforward way. I'm not worried about losing my data etc.
Thanks for all of your advice. I managed to flash the nemesis s7e rom for s6 and it's all working great now. Think I'll stick with this for a while and not dabble again until I know what I'm doing!
Jim1973 said:
Thanks for all of your advice. I managed to flash the nemesis s7e rom for s6 and it's all working great now. Think I'll stick with this for a while and not dabble again until I know what I'm doing!
Click to expand...
Click to collapse
Hi Jim,
Just got a Galaxy S6 (SM-G920F international, unbranded version) and started gathering the relevant info about flashing a custom recovery, rooting, custom roms etc. Like you, I also ran into a bootloop after flashing TWRP with Odin (and restarting the phone).
Eventually I found out that the trick was to power off the phone immediately after flashing TWRP (by pressing and holding the Volume Down + Power button for a few seconds) instead of restarting right away.
Anyway, this seemed to work for me. So if you want to do some dabbling again it might work for you, too!
Thanks, that's good to know for future reference.
Long story short. I have downloaded about 10 different firmwares and they will not load onto Sm-N915P (Sprint Note4) I attempted to root last year and failed and I just left it alone. I came back to it now and while doing a factory reset via Twrp I wiped OS. I dont remember what firmware I had on the phone as their was no backup done. ( I know, I know now i understand why you must always do a back up). I am trying to at least get any type of firmware reloaded onto the phone. I even have a membership at sammobile now trying firmwares. I would prefer to not just keep downloading firmwares and trying them. If someone has a idea how I can get my phone back up and running.
Im not sure what information to add to this post. I do have Twrp twrp-3.0.2-0-trltespr.img running on phone. but everytime I try to load Firmware I get the MD5 error (I removed the MD5 tag and still get fail.
When I attempt to start phone i get Kernel is not seandroid enforcing (Red)
Set Warranty bit Kernel (Yellow)
Try flashing The latest Twrp from:
https://dl.twrp.me/tblte/
And Custom rom From:
https://forum.xda-developers.com/no...ent/romkernel-galaxy-notedge-1-0beta-t3393124
steavex said:
Try flashing The latest Twrp from:
https://dl.twrp.me/tblte/
And Custom rom From:
https://forum.xda-developers.com/no...ent/romkernel-galaxy-notedge-1-0beta-t3393124
Click to expand...
Click to collapse
Thank you for your reply. I am downloading now and will let you know how it turns out. I really appreciate your reply. I was beginning to think no one would respond and I would have to just trash it and move on.
Thanks for your help
Well Great news! It flashed to the phone no problem. However after it went to a blue screen that said starting Anroid twice. It is now in a boot loop. Can anybody assist me with this.
Sorry I've been kinda busy and forgot to check for replys.....you can try flashing custom kernel from the link below
https://androidfilehost.com/?w=files&flid=109669
Download the first file: