Database Info

What is my preferred network type?

So I've been trying to tweak my signal, go into dialer *#*#4636#*#*. Go all the way down, under preferred network type says unknown. Click on box and options are, wcdma preferred, GSM only, wcdma only, GSM auto prl, wcdma auto prl, GSM/wcdma auto prl , evdo only and i think 2 more. One of wich is unknown. Phone is rooted, stock rom. Any ideas? Live in Colorado
Sent from my Nexus S 4G using XDA App

yea i was wondering the same thing. my evo is/was always on CDMA auto PRL, my ns4g is either on WCDMA or unknown. i cant help but think this has a lot to do with reception issues

Edit: Also switched cdma roaming to home only not automatic, not sure if auto made it keep switching to unknown type. Waited a cuple minutes after turning 4G off and speed went back up, might have needed a minute to fully switch back to 3G. Been messing with preferred type, but to make it stay have to push home cause back button keeps resetting to unknown type. Check speedtest.net app, shows better speed, but when i use the 4G and then turn off speeds are worse again. But then again you'd think cause i get a low 4G that my 3G would be faster, not so.
hellcatt said:
yea i was wondering the same thing. my evo is/was always on CDMA auto PRL, my ns4g is either on WCDMA or unknown. i cant help but think this has a lot to do with reception issues
Click to expand...
Click to collapse
Sent from my Nexus S 4G using XDA App

hellcatt said:
yea i was wondering the same thing. my evo is/was always on CDMA auto PRL, my ns4g is either on WCDMA or unknown. i cant help but think this has a lot to do with reception issues
Click to expand...
Click to collapse
The same here, the evo always is cdma auto but nexus keeps jumping to unknown
Sent from my PC36100 using Tapatalk

pierre1321 said:
Edit: Also switched cdma roaming to home only not automatic, not sure if auto made it keep switching to unknown type. Waited a cuple minutes after turning 4G off and speed went back up, might have needed a minute to fully switch back to 3G. Been messing with preferred type, but to make it stay have to push home cause back button keeps resetting to unknown type. Check speedtest.net app, shows better speed, but when i use the 4G and then turn off speeds are worse again. But then again you'd think cause i get a low 4G that my 3G would be faster, not so.
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
yea ive done all that and it always goes back to wcdma or unknown

Yeah, phone finally went back to unknown. There's that PRL update in this section, steps are for windows 7 , didn't work on my W/XP. Laptops in the shop so my options are limited.
Sent from my Nexus S 4G using XDA App

Yes, Evdo, interesting read. Will have to reread some stuff on ro.build
Came from an Evo 4g, so the methods for a better signal are different. Thanks for the info
bencozzy said:
ok new build.prop hack confirmed working on i9020t
how to set preferred network type (looking for this portion easy to find like right in the middle sticks out)
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=soju-user 2.3.4 GRJ22 121341 release-keys
ro.build.fingerprint=google/soju/crespo:2.3.4/GRJ22/121341:user/release-keys
ro.product.rat=XXXXXXXX
# end build properties
add the italic underlined code, without being in italic and underlined. and replace the x's with whatever you want to use:
GSM/CDMA auto (PRL)
EvDo only
CDMA only
CDMA auto (PRL)
GSM auto (PRL)
WCDMA only
GSM only
WCDMA preferred
here for copy and paste (just put your network in there!!!)
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=soju-user 2.3.4 GRJ22 121341 release-keys
ro.build.fingerprint=google/soju/crespo:2.3.4/GRJ22/121341:user/release-keys
ro.product.rat=
# end build properties
have fun and post some results. If something breaks blame the person that invented the internet cause it's not my fault and i cant be held responsible for you beleiving everything you read!!!
http://forum.xda-developers.com/showthread.php?t=1116884 some decent info in here the radios are for gsm only not the 4g though but you might find some useful stuff to play with. sprint is evdo right??
Click to expand...
Click to collapse
Sent from my Nexus S 4G using XDA App

Ns4g, atlest mine doesn't allow me to enter the wimaxx menue. I do *#*#DATA#*#*, enter msl and lets me modify other stuff. Just not wimaxx, i click on it and it shows the msl box. Like i never entered it in the first place. I enter it again and it sends me back to the menue.is there another code or something?
bencozzy said:
ok read up on wimax sounds more like its very closely related to wifi maybe a wifi hack is needed??? dont have 4g other wise id probably find a work around for it??
look into build.prop fixes or hacks for other wimax devices might find something usable for the ns4g.
Click to expand...
Click to collapse
Sent from my Nexus S 4G using XDA App

Cool, ill ask in Q&A first. See if i can get some info on not being able to access wimaxx menue.
Sent from my Nexus S 4G using XDA App

Performed this edit in build.prop. Thanks for this. Changed my Nexus S 4G to CDMA auto (PRL)...

tailsthecat3 said:
Performed this edit in build.prop. Thanks for this. Changed my Nexus S 4G to CDMA auto (PRL)...
Click to expand...
Click to collapse
Did you do it through adb or through a root explorer?
My type still switches to unknown, even though it show in build.prop
Sent from my Nexus S 4G using XDA App

Well then it probably doesnt work to make the network type stick. I altered the file through root explorer. Reallllly wanna make my network type stick to cdma auto

Gothis from Build.prop thread-use *#*#4636#*#* to access network type, wait for signal to turn green, select network type then quickly go down to refresh and then update. These are next to the smsc box. So far it seems to be sticking, not sure about after reboot.
tailsthecat3 said:
Well then it probably doesnt work to make the network type stick. I altered the file through root explorer. Reallllly wanna make my network type stick to cdma auto
Click to expand...
Click to collapse
Sent from my Nexus S 4G using XDA App

tailsthecat3 said:
Performed this edit in build.prop. Thanks for this. Changed my Nexus S 4G to CDMA auto (PRL)...
Click to expand...
Click to collapse
notice any difference?

pierre1321 said:
Gothis from Build.prop thread-use *#*#4636#*#* to access network type, wait for signal to turn green, select network type then quickly go down to refresh and then update. These are next to the smsc box. So far it seems to be sticking, not sure about after reboot.
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
This didnt seem to work for me.
hellcatt said:
notice any difference?
Click to expand...
Click to collapse
None.

These were my steps
1. Go t system and make a few copies of build.prop.
2.went into copies of build.prop, ( main build .prop runs in background so it would let me alter).then added witch ever type i wanted , (like me i did ro.product.rat=WCDMA preferred) .
3. Made sure i saved my new copy.
4. Then i copied and pasted my new building.prop over to system. (Says there is already one there, i overwrite original.
5. Get out of whichever explorer used. And restart phone.
6. Then went to *#*#4636#*#* to get to preferred network type, then i select the option i chose to put in build.prop. ( that way they are the same.
6. After selecting type quickly got to refresh and update ( near the smsc box near the bottom.
You should notice the update tab stay dark.
Before i messed with build.prop and added what i wanted it would still change back. Now it atleast stays till next reboot.
Don't know if that helps.....
tailsthecat3 said:
This didnt seem to work for me.
None.
Click to expand...
Click to collapse
Sent from my Nexus S 4G using XDA App

pierre1321 said:
These were my steps
1. Go t system and make a few copies of build.prop.
2.went into copies of build.prop, ( main build .prop runs in background so it would let me alter).then added witch ever type i wanted , (like me i did ro.product.rat=WCDMA preferred) .
3. Made sure i saved my new copy.
4. Then i copied and pasted my new building.prop over to system. (Says there is already one there, i overwrite original.
5. Get out of whichever explorer used. And restart phone.
6. Then went to *#*#4636#*#* to get to preferred network type, then i select the option i chose to put in build.prop. ( that way they are the same.
6. After selecting type quickly got to refresh and update ( near the smsc box near the bottom.
You should notice the update tab stay dark.
Before i messed with build.prop and added what i wanted it would still change back. Now it atleast stays till next reboot.
Don't know if that helps.....
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
Didnt work. Switches back to WCDMA upon leaving the menu. Then shifts to unknown.
This phones radios need some serious updating...as well as some other problems.

Is yer rom odexed or deodexed, is it stock rom or different. I read somewhere that a deodexed rom allows a little more play as far as changing things, not sure though. It stays as long as you don't reboot after refresh and update, before it would reset regardless of reboot or not. Did you check build.prop in system folder to make sure it kept the add in? Mine wouldn't stay untill i copy and pasted over the original in system file, cause build.prop runs in the background. But there are so many things that work and won't work depending on yer rom and how it runs.
tailsthecat3 said:
Didnt work. Switches back to WCDMA upon leaving the menu. Then shifts to unknown.
This phones radios need some serious updating...as well as some other problems.
Click to expand...
Click to collapse
Sent from my Nexus S 4G using XDA App

pierre1321 said:
Is yer rom odexed or deodexed, is it stock rom or different. I read somewhere that a deodexed rom allows a little more play as far as changing things, not sure though. It stays as long as you don't reboot after refresh and update, before it would reset regardless of reboot or not. Did you check build.prop in system folder to make sure it kept the add in? Mine wouldn't stay untill i copy and pasted over the original in system file, cause build.prop runs in the background. But there are so many things that work and won't work depending on yer rom and how it runs.
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
stock rom. performed multiple variations of the steps that are assumed to work. nothing works as it always switches back to wcdma then unknown.

I have found that I make the wcdma change with *#*#4636#*#* the change shows. If i make shortcut in home screen for phone info the line still shoes gsm/cdma. I still have to change it there.

[Q] How to turn off Data Roaming by default?

Hello,
somebody knows how to turn off Data Roaming by default? Because .prop String does not work for me. And when i turn off, its turning on again after reboot.
Would be very happy if someone can tell me, because its really pissing me off. I live between switzerland and germany. I have every month ca. 60 € of extra costs because the phone changes to a roaming opperator during download or something like that. So its a fu**ing pain in my ass.
Thanks in Advance.
Sorry for my bad english...
Sent from my LG-P920 using xda premium

Go to your settings menu, find the wireless section and then in there go to the mobile networks menu. In there is a setting that switches on or off data roaming just keep it unchecked.
Dave

Oh come on read my question before answering.
Sent from my LG-P920 using xda premium

No need to be rude..
You can set the network operator to manual by selecting the operator. That way it won't connect you to one you don't want to.
You can also turn off automatic update from the settings-about menu to stop automatic updates... do this in the market too if you have checked any automatically update apps.

darknite999 said:
No need to be rude..
You can set the network operator to manual by selecting the operator. That way it won't connect you to one you don't want to.
You can also turn off automatic update from the settings-about menu to stop automatic updates... do this in the market too if you have checked any automatically update apps.
Click to expand...
Click to collapse
This is what i already tried to. But not worked for me. After 2 or 3 hours again having swisscom or Vodafone DE...
I also tried to disable in Settings.db but after restart enabled again.
Sent from my LG-P920 using xda premium

Hotspot Mod (NO ROOT)

Just to inform you guys.. The hotspot mod where you download Shortcut Master Lite from the play store and edit the 2Apn's by adding "dun" is working on the Sprint Note 8. ???

Any hotspot for Note 20 like "dun" ?
Anyone try this or something similiar on Note20 ?
Dbzfan said:
If your having issues
Please note that cre1 update will unpatch the hotspot after few minutes of using. You will have to downgrade to Crd7 (Odin) for this patch to work and ignore the update.
Dont update past Crd7
Steps:
Dial
##27263#
Click yes
Let it do its thing
Open shortcutmaster
Click menu
Click app explorer
Find com.test.lte*****
Click ltefunctionitytest & Launch
Click Lte apn setting
Under apn type ADD DUN
Should look like
default,mms,dun
Click menu in top right corner save
Now I did this with both
Ehrpd & lte
Reboot
Done
Like my page:
Facebook.com/jbfiretvstick
Click to expand...
Click to collapse

Where do we add "dun" in the 2APN settings?

Y0sHii said:
Where do we add "dun" in the 2APN settings?
Click to expand...
Click to collapse
Edit the "APN2 LTE internet"
Look for the "APN type"
The Default should be " default,mms"
Add ",dun" to the end of it.
And the finish product should be "default,mms,dun"
Make sure you save your modification. Hope this helps.

DaHoBO said:
Edit the "APN2 LTE internet"
Look for the "APN type"
The Default should be " default,mms"
Add ",dun" to the end of it.
And the finish product should be "default,mms,dun"
Make sure you save your modification. Hope this helps.
Click to expand...
Click to collapse
I'm sry but I'm a noob. Where do I find the APN type ? I'm sure once I find it I can make this happen. Just having a hard finding the APN type. Searched it in the search with no luck. Thanx in advance

DaHoBO said:
Edit the "APN2 LTE internet"
Look for the "APN type"
The Default should be " default,mms"
Add ",dun" to the end of it.
And the finish product should be "default,mms,dun"
Make sure you save your modification. Hope this helps.
Click to expand...
Click to collapse
okay. Figured it out and working great . Does this stick thru a restart?

Doesn't work on latest update.
Sent from my SM-N950U using XDA-Developers Legacy app

miami4lf said:
okay. Figured it out and working great . Does this stick thru a restart?
Click to expand...
Click to collapse
Yes, the settings sticks even after a reboot.
Androidwarrior said:
Doesn't work on latest update.
Sent from my SM-N950U using XDA-Developers Legacy app
Click to expand...
Click to collapse
For AQI5? still works for me...

DaHoBO said:
Yes, the settings sticks even after a reboot.
For AQI5? still works for me...
Click to expand...
Click to collapse
Working for me on latest update as well ... Thanx again. DaHoBo

miami4lf said:
Working for me on latest update as well ... Thanx again. DaHoBo
Click to expand...
Click to collapse
Did you do it before applyling update?
Sent from my SM-N950U using XDA-Developers Legacy app

Androidwarrior said:
Did you do it before applyling update?
Sent from my SM-N950U using XDA-Developers Legacy app
Click to expand...
Click to collapse
After the update

Just a FYI this does not stick through a profile update. Have to reset apn after and then it works fine
Sent from my SM-N950U using XDA-Developers Legacy app

Where do you find the apns in the manager?

superdaves34 said:
Where do you find the apns in the manager?
Click to expand...
Click to collapse
Do a search for "LTE"
Look for the instance "LTEFunctionality Test" "com.test.LTEFunctionality"
Once open, look for "LTE APN Settings"
There should be two which you can edit, the first is " APN2 EHRPD internet"
The second is APN2 LTE internet, this is the one you would like to edit.
Scroll down to "APN type" and add the ",dun" and done.

What if its shaded out how can we get it to work then.

mroj2162 said:
What if its shaded out how can we get it to work then.
Click to expand...
Click to collapse
Download Shortcut Master (Lite) from the playstore and perform your APN edits from the app.

Unlimited?
So this would be unlimited hotspot on my unlimited network from Sprint? and also I noticed that it wont let me open my sprint app anymore after adding ,dun
My guess this happens due to block the app from tracking your hotspot usage? I have 10GB of hot spot and I used this method then went back to normal settings again without ,dun and restarted my phone the My sprint app opened and well I be damned but it did not track my usage I still have 0 data out of 10GB used! I guess I will just have to disable it when I want to check my activity on the My sprint app, this is awesome!!! :good:
If I'm wrong please let me know

Akcent13 said:
So this would be unlimited hotspot on my unlimited network from Sprint? and also I noticed that it wont let me open my sprint app anymore after adding ,dun
My guess this happens due to block the app from tracking your hotspot usage? I have 10GB of hot spot and I used this method then went back to normal settings again without ,dun and restarted my phone the My sprint app opened and well I be damned but it did not track my usage I still have 0 data out of 10GB used! I guess I will just have to disable it when I want to check my activity on the My sprint app, this is awesome!!! :good:
If I'm wrong please let me know
Click to expand...
Click to collapse
Or you could simply check your activity on the web via PC.
Personally I don't even bother, as it's unlimited. Or, reset the changes and change back whenever you get curious. Either way works

themisterwilson said:
Or you could simply check your activity on the web via PC.
Personally I don't even bother, as it's unlimited. Or, reset the changes and change back whenever you get curious. Either way works
Click to expand...
Click to collapse
I tried and it still shows no usage ? i think it is working i will check on pc. Thanks for the advice bro.

Akcent13 said:
I tried and it still shows no usage ? i think it is working i will check on pc. Thanks for the advice bro.
Click to expand...
Click to collapse
Oh yeah went thru the same thing using this method on the s7 with the unlocked firmware. I couldn't believe it wasn't registering, because I wasn't rooted. It's true though, it works. I would test it jus like you're thinking, by using the hotspot without the mod. It would count the data up while I watched. Then I made these edits, and BOOM! No more data was showing on the hotspot usage on the Sprint site. Didn't have any issues for a year. Then the phone broke [emoji28]
Sent from my SM-N930P using Tapatalk

Not working QI5. Hotspot turns on, and I'm able to log in to hotspot, but no data. After turning off hotspot, I have to switch airplane mode on and off to get data back. Weird stuff.

Where to find this settings screen?

I have been racking my brain on this since I got the phone. I can only get to this settings screen (see screenshot) by using the Samsung Band Selection app. It is the screen where you can change priority for WiFi calling, preferred network type, etc. My phone is AT&T not sure if its a carrier specific issue.
Sent from my SM-N986U using Tapatalk
View attachment 5089817

mikeregister said:
I have been racking my brain on this since I got the phone. I can only get to this settings screen (see screenshot) by using the Samsung Band Selection app. It is the screen where you can change priority for WiFi calling, preferred network type, etc. My phone is AT&T not sure if its a carrier specific issue.
Sent from my SM-N986U using Tapatalk
View attachment 5089817
Click to expand...
Click to collapse
Not sure what that picture is of since it says, "Invalid Attachment specified. This can happen for a variety of reasons-- most likely because the thread or post you are trying to view has been moved or deleted. Please return to the*forum home*and browse for another similar post." However I do think I know what you're talking about so download this https://play.google.com/store/apps/details?id=com.kasitskyi.hiddensettings and tap radio info.
It's something like this screenshot.

MrMike2182 said:
Not sure what that picture is of since it says, "Invalid Attachment specified. This can happen for a variety of reasons-- most likely because the thread or post you are trying to view has been moved or deleted. Please return to the*forum home*and browse for another similar post." However I do think I know what you're talking about so download this https://play.google.com/store/apps/details?id=com.kasitskyi.hiddensettings and tap radio info.
It's something like this screenshot.
Click to expand...
Click to collapse
Can you see the screenshot now in the original post? The RadioInfo option doesn't lead to this screen. It doesn't seem like these options should be hidden. The option to have WiFi calling over WiFi regardless of the status of the mobile network hasn't been hidden on previous devices like it is on this one.
Sent from my SM-N986U using Tapatalk

mikeregister said:
I have been racking my brain on this since I got the phone. I can only get to this settings screen (see screenshot) by using the Samsung Band Selection app. It is the screen where you can change priority for WiFi calling, preferred network type, etc. My phone is AT&T not sure if its a carrier specific issue.
Sent from my SM-N986U using Tapatalk
View attachment 5089817
Click to expand...
Click to collapse
Or this which is in settings, connections and then mobile networks..

mikeregister said:
Can you see the screenshot now in the original post? The RadioInfo option doesn't lead to this screen. It doesn't seem like these options should be hidden. The option to have WiFi calling over WiFi regardless of the status of the mobile network hasn't been hidden on previous devices like it is on this one.
Sent from my SM-N986U using Tapatalk
Click to expand...
Click to collapse
Yeah I see the attachment now and I think for att it's in mobile networks. It's different for me because I'm using an unlocked Note 20 Ultra.

MrMike2182 said:
Or this which is in settings, connections and then mobile networks..
Click to expand...
Click to collapse
Looks a little different on mine. This is where those settings should be, but it doesn't have all the same stuff as the screenshot I posted in the OP

mikeregister said:
Looks a little different on mine. This is where those settings should be, but it doesn't have all the same stuff as the screenshot I posted in the OP
Click to expand...
Click to collapse
Yeah they change things up every year for some reason and I don't know why. You just have to hunt them down basically lol.

MrMike2182 said:
Yeah they change things up every year for some reason and I don't know why. You just have to hunt them down basically lol.
Click to expand...
Click to collapse
Yea, I think there is no way to get to this menu through the settings menu, phone app, etc. It's crazy when some basic features are there.
Something else that is weird if you notice in the first screen shot the "Preferred Network Method" shows "Invalid Network Mode 26. Ignore." This is what it says by default (when all bands are enabled). When I click on it I can choose LTE, 3G, or 2G (see screenshot) but not 5G. So if I selected one of these, I cannot get 5G back without using the Samsung Band Selection app. I have 3 devices, all the same issue.
Even more interesting. When I select 3G, I get the basic 4G icon (no LTE icon) in my notification bar. Probably AT&T being shady and trying to classify 3G as 4G like they do with their 5Ge.

mikeregister said:
Yea, I think there is no way to get to this menu through the settings menu, phone app, etc. It's crazy when some basic features are there.
Something else that is weird if you notice in the first screen shot the "Preferred Network Method" shows "Invalid Network Mode 26. Ignore." This is what it says by default (when all bands are enabled). When I click on it I can choose LTE, 3G, or 2G (see screenshot) but not 5G. So if I selected one of these, I cannot get 5G back without using the Samsung Band Selection app. I have 3 devices, all the same issue.
Even more interesting. When I select 3G, I get the basic 4G icon (no LTE icon) in my notification bar. Probably AT&T being shady and trying to classify 3G as 4G like they do with their 5Ge.
Click to expand...
Click to collapse
Since you're on AT&T I just read a thread earlier where they were all talking about the phone not being provisioned correctly and they all had to call AT&T in order to get it fixed and then 5G worked.
---------- Post added at 09:38 PM ---------- Previous post was at 09:36 PM ----------
mikeregister said:
Yea, I think there is no way to get to this menu through the settings menu, phone app, etc. It's crazy when some basic features are there.
Something else that is weird if you notice in the first screen shot the "Preferred Network Method" shows "Invalid Network Mode 26. Ignore." This is what it says by default (when all bands are enabled). When I click on it I can choose LTE, 3G, or 2G (see screenshot) but not 5G. So if I selected one of these, I cannot get 5G back without using the Samsung Band Selection app. I have 3 devices, all the same issue.
Even more interesting. When I select 3G, I get the basic 4G icon (no LTE icon) in my notification bar. Probably AT&T being shady and trying to classify 3G as 4G like they do with their 5Ge.
Click to expand...
Click to collapse
Threads are here
https://forum.xda-developers.com/galaxy-note-20-ultra/help/unlocked-version-doesnt-5g-att-t4155575
And here
https://forum.xda-developers.com/galaxy-note-20-ultra/help/apn-changes-t4152133/page3

MrMike2182 said:
Since you're on AT&T I just read a thread earlier where they were all talking about the phone not being provisioned correctly and they all had to call AT&T in order to get it fixed and then 5G worked.
---------- Post added at 09:38 PM ---------- Previous post was at 09:36 PM ----------
Threads are here
https://forum.xda-developers.com/galaxy-note-20-ultra/help/unlocked-version-doesnt-5g-att-t4155575
And here
https://forum.xda-developers.com/galaxy-note-20-ultra/help/apn-changes-t4152133/page3
Click to expand...
Click to collapse
Yea, I've been following that thread. Don't think thats the issue here, my 5G works fine. Only doesn't if I change it through that settings menu in the OP which apparently isn't in the default system settings anywhere anyway. Maybe they meant to leave it like this or maybe an oversight, who knows....
Sent from my SM-N986U using Tapatalk

mikeregister said:
Yea, I've been following that thread. Don't think thats the issue here, my 5G works fine. Only doesn't if I change it through that settings menu in the OP which apparently isn't in the default system settings anywhere anyway. Maybe they meant to leave it like this or maybe an oversight, who knows....
Sent from my SM-N986U using Tapatalk
Click to expand...
Click to collapse
Yeah I'm really not sure since I'm not on AT&T but maybe someone who is might know but I personally don't think you'll find it like it used to be I'm pretty sure they've changed it up and the way it is now is what they changed it to. I could be wrong so hopefully another AT&T user will know.

MrMike2182 said:
Yeah I'm really not sure since I'm not on AT&T but maybe someone who is might know but I personally don't think you'll find it like it used to be I'm pretty sure they've changed it up and the way it is now is what they changed it to. I could be wrong so hopefully another AT&T user will know.
Click to expand...
Click to collapse
Thanks for trying anyway! I'll survive without being able to access that menu, just seems like they missed it. Its obviously linked in the system somehow if that app can open it. [emoji848]
Sent from my SM-N986U using Tapatalk

I was able to find the settings menu in the "Shortcut Maker" app that the "Samsung Band Selector" app opens too in order to get these options. Not that it changes anything, but incase anyone coming across this is interested.

How can I set up my phone to turn data off once I'm connected to WiFi?

Essentially I want to have WiFi on and data off at home and at work. I want my data on and WiFi off when I am not in either of those locations. I also want the switch to be automatic.
How can I go about setting this up?

Explore the app Tasker, it should have the options and rules to give you the solutions.
Sent from my PH-1 using Tapatalk
---------- Post added at 04:35 AM ---------- Previous post was at 04:32 AM ----------
Also check out AutomateIt Pro, which has a better user interface.
Sent from my PH-1 using Tapatalk

eKeith said:
Explore the app Tasker, it should have the options and rules to give you the solutions.
Sent from my PH-1 using Tapatalk
---------- Post added at 04:35 AM ---------- Previous post was at 04:32 AM ----------
Also check out AutomateIt Pro, which has a better user interface.
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
I figured that was my best option. I was hoping there was something on the phone stock that would do the job, and I didn't know about it. Thank you very much.

Actually you don't need to use any 3rd party tools.
Enable Programmers Options, go there and look for option called Mobile connection always on. Turn it off and you're done.
After that, whenever you're in WiFi, your mobile connection will be off, but keep your WiFi on.
Why do you want to switch off your WiFi when connected to mobile connection? Battery impact is minimal.