Introduction
I tested a lot of mods, and I read a lot of scripting stuffs over time but the finding was always the same : A majority of mods contained only placebo things, and they only made things worse. I decided to make my own mod and Young Engine is what I got, I was septic to share it but sharing is caring after all ! Its particulairity is that every code line and every tested values inside suit our Galaxy Young.
Features
Compatible with all the ROMs (Stock and custom ROMs, CM7/CM9/CM11) and kernels.
Better memory management (calculated and based on Galaxy Young's RAM).
Better partitions mount options (compatible with both of EXT4 & RFS filesystems).
Better battery life.
Better call quality. That's placebo.
Better scrolling. That's placebo.
Better SDcard read/write speed.
I/O scheduler general and specific tunables for SIO and SIOPlus schedulers.
SmartassV2 governor tuning.
3G and TCP/IP optimisations (Download/upload speeds, network's latency reducing).
Useless debugging disable (for non-dev users).
Requirements
Rooted device with Busybox installed.
Init.d support.
Custom recovery.
Installation
Delete your installed scripts (expect which your kernel and/or your ROM need).
Download the attached ZIP file and put in inside your SDcard.
Reboot your phone in recovery mode.
Flash the ZIP file and reboot again your phone.
Credits
@FeraVolt : Your awesome work with FeraDroid gave a new life to my mod, thank you a bunch !
@osm0sis & Franco's Dev Team : For their great scripts which helped me a lot, the entropy part, and the TCP/IP optimisations are from them ! Thanks a lot guys.
@pkgnex : For his SIO and SIOPlus schedulers tunables, thank you for the great work !
Nice work Dude !! Keep it up !!!
First changelog - Thanks again @FeraVolt !
Added SmartassV2 governor tuning.
Removed the screen state scaling script.
Updated partitions mount options.
Updated debugging disable script.
Updated memory management, filesystem and entropy tunings.
Updated I/O scheduler tunables.
Cannot download ......please fix the download link.
Arkonite said:
Cannot download ......please fix the download link.
Click to expand...
Click to collapse
Sorry, it's now fixed !
Best regards.
Is this compatible with cm 7.2?
Arkonite said:
Is this compatible with cm 7.2?
Click to expand...
Click to collapse
Of course, it's compatible also with CM11/CM9 and stock ROM.
Best regards.
Second changelog - Thanks @raisul2010.5396 for some ideas :
Added calculated LMK's minfree/adj and Android's OOM flags (which are both synced with each other).
Added build.prop flags for several purposes :
Overall performance improvement.
Battery life improvement.
Better scrolling.
Call related improvements (Reduced proximity and ring delays, enabled Adaptive Multi-Rate Wideband for a better call quality, mobile data's speed increase).
Updated again memory management, filesystem and entropy tunings.
Updated again debugging disable script.
Please, I'm tired of the feedbacks lack. Try to understand my situation as I done all my possible for this mod's making.
Best regards.
I have a question: Is compatible with the Percy's ROM and kernel?
danielcuervog said:
I have a question: Is compatible with the Percy's ROM and kernel?
Click to expand...
Click to collapse
Yes, it is.
Best regards.
Nice.... New update is much stable and faster.
BlackGunZ said:
Second changelog - Thanks @raisul2010.5396 for some ideas :
Added calculated LMK's minfree/adj and Android's OOM flags (which are both synced with each other).
Added build.prop flags for several purposes :
Overall performance improvement.
Battery life improvement.
Better scrolling.
Call related improvements (Reduced proximity and ring delays, enabled Adaptive Multi-Rate Wideband for a better call quality, mobile data's speed increase).
Updated again memory management, filesystem and entropy tunings.
Updated again debugging disable script.
Please, I'm tired of the feedbacks lack. Try to understand my situation as I done all my possible for this mod's making.
Best regards.
Click to expand...
Click to collapse
Will test it soon, and add the link to your thread in tweaks section of my ports
good tweak for this lil device,maybe its cooler to have a cleaner in it too for clean junk files and other things like that on boot,when needed i can give u a lil help for this,keep it up.
--SIGNATURE--
Final changelog
Updated LMK's minfree/adj and Android's OOM flags (RAM management). Thanks a lot @ImbaWind !
Updated build.prop flags (Better UI and better performance).
Updated again memory management, kernel and entropy tunings (it does the same as the well-known Seeder scripts).
Updated partitions mount options.
You will be impressed guys (@raisul2010.5396 - @Arkonite - @-CALIBAN666-) !
i am using hyperion 9 beta and i flashed this zip file but it takes time much less than 5 seconds even u can say that it flashes the whole zip file in 2 seconds only. it means it didn't flashed on my rom correctly...or it is?
Aryanyadav9 said:
i am using hyperion 9 beta and i flashed this zip file but it takes time much less than 5 seconds even u can say that it flashes the whole zip file in 2 seconds only. it means it didn't flashed on my rom correctly...or it is?
Click to expand...
Click to collapse
The whole content of the mod is contained in the init.d script file, that's why the installation is very fast. Mount your /system partition, install the ZIP and check the log file after the reboot in the /data partition.
Edit : I did a very small update again to the ZIP package, I corrected a typo.
Best regards.
BlackGunZ said:
The whole content of the mod is contained in the init.d script file, that's why the installation is very fast. Mount your /system partition, install the ZIP and check the log file after the reboot in the /data partition.
Edit : I did a very small update again to the ZIP package, I corrected a typo.
Best regards.
Click to expand...
Click to collapse
ok i got it right now, Tysm
Related
This kernel is based on the original Bali Kernel for Vibrant 3G. I'm not into OC/UV and will try to keep this as close to stock as possible but with balanced performance and good battery life.
- Bootanimation support
- EXT4 support
- init.d support
- Built in Voodoo CWM (red)
- Voodoo Lagfix
- Voodoo sound v9 (download voodoo app or voodoo plus from market)
- Adjusted HZ value to improve smoothness
- no FPS cap
- TinyRCU for better speed and efficiency
- lowmemorykiller patch for compatibility with Tiny RCU
- ext4 patch
- jhash3 for smoothness and responsiveness
- BFQ I/O scheduler to improve I/O throughput
- TUN (VPN support)
- CIFS (Samba support)
NOTE: this kernel will work with any 2.2.x based ROM.
Special Thanks:
Everybody at Team Whiskey .. you guys are awesome.
sduvick, ayoteddy, yogi2010, and fawkreviewz for testing this kernel
supercurio - for wonderful work on voodoo
Paul McKenny - TinyRCU
hardcore - for ideas on kernel tweaks and efficiencies
jdiddyub - for awesome boot logo image
DISCLAIMER:
As always, I'm not responsible with any damage cause to your phone.
INSTALL INSTRUCTION:
1. Upload kernel to your sdcard
2. Reboot to CWM
3. Flash the kernel using CWM
VOODOO LAGFIX INSTRUCTION on Second OP
KNOWN BUG:
Fail conversion process when trying to convert your /data back to RFS. (Still trying to fix this issue)
CHANGELOG:
Code:
2.2
- RFS conversion fix for /data (thanks sduvick for finding the fix and test)
2.1
- Added code tweaks
- Compiler optimization for better performance
2.0U3
- Fixed partition check during boot, ext4 conversion should work.
2.0
- Added Voodoo lagfix
- Built in Voodoo CWM (red)
1.0
- Initial release using Bali patch
Download:
Bali SK4G v2.2
Bali SK4G v2.1
Bali SK4G v2.0 Update3
Voodoo Instruction: (UPDATE)
- Flash kernel as usual
- Reboot the phone
- Go to recovery again (Don't use RM, use either adb, power menu or button combination)
- If you have red CWM (Voodoo Lagfix Recovery) then you can enable Voodoo from Voodoo options. If you don't get red CWM, reboot the phone and download Voodoo Control App. You can manage your voodoo lagfix from it. Once you enable voodoo lagfix from either red cwm or voodoo control app then reboot
- During reboot, you should hear female voice ("Linda") letting you know the status of your ext4 conversion
- Once your phone boots up it should have /cache, /data, and /system on ext4.
Enjoy
Omg....
Im going to test the Ext4 conversion and report back
Thank you very much dr.honk
Sent from my GT-I9000 using XDA App
Just tested it, and in my test, it didn't work.
I tried:
backup rom, flash extconverter, restore rom, gets stuck at first sidekick4g logo
sduvick said:
Just tested it, and in my test, it didn't work.
I tried:
backup rom, flash extconverter, restore rom, gets stuck at first sidekick4g logo
Click to expand...
Click to collapse
Same for me.. But everything else works perfect
Sent from my GT-I9000 using XDA App
ayoteddy said:
Omg....
Im going to test the Ext4 conversion and report back
Thank you very much dr.honk
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
The ext4 conversion is the "lagfix"?
yes, but it we still need to get it working correctly.
Nice , just installed this kernal on my SK4G on Smooth Maximus ROM V2.0
Installed it.
Boot animation plays BOTH, stock AND bootanimation.zip
fixed that by renaming stock boot file with .bak at end.
but the startup sound still plays... cant figure out how to get that to shutup... any suggestions?
EDIt: just curious... how would one undo a kernel install? is there a stock kernel download for SK4G?
Would folks help me document what these various features do?
Here's what I know (or think I know):
- Bootanimation support
Allows for custom animations on boot instead of (or in addition to?) the Samsung / Sidekick animation.
- EXT4 support
Support for a well-loved and respected file system considered better (faster) than the one most Samsung phones ship with. This lays the groundwork for the lagfix, but it's not the whole thing.
- init.d support
init.d are Linux startup scripts that let you run customize the base OS at startup. I assume Android does not typically have them, and this enables them.
- Voodoo sound v9 (download voodoo app or voodoo plus from market)
(I do not know what this is. I could not find the mentioned apps in the market.)
- Adjusted HZ value to improve smoothness
(I don not know what this is.)
- no FPS cap
I assume this refers to a Frames Per Second animation cap? Probably intended to preserve battery life or make more CPU available to other apps? Things my animate smoother without it?
- TinyRCU for better speed and efficiency
(I don't know what this is, or what it does.)
- lowmemorykiller patch for compatibility with Tiny RCU
I assume this kills processes on low memory, but Android is supposed to do that anyway. I'd love to know more.
- ext4 patch
Like "ext4 support" above, this lets you use a more efficient sort of file storage format. We still need more to actually use it, though.
- jhash3 for smoothness and responsiveness
(I don't know what this is.)
- BFQ I/O scheduler to improve I/O throughput
(I don't know what this is.)
- TUN (VPN support)
VPN is Virtual Private Networking. It allows you to connect to a private network elsewhere, such as at an office, and access services that are only available on that private network, like file servers, printers, and email servers. It requires a VPN server and a bunch of configuration.
- CIFS (Samba support)
File sharing support. This would let you mount file shares to your phone and get to their files.
If folks could help fill me in on the things I don't know (and potentially correct me on anything I misrepresented or just plain got wrong) I'll be happy to update this post and we'll have a nice little FAQ.
jahnbodah said:
Installed it.
Boot animation plays BOTH, stock AND bootanimation.zip
fixed that by renaming stock boot file with .bak at end.
but the startup sound still plays... cant figure out how to get that to shutup... any suggestions?
Click to expand...
Click to collapse
I'd be glad to have a few more details on how you did that. Are these the bootsamsung.qmg and bootsamsungloop.qmg files in /system/media? Or just one or the other?
You had to remount the file system read/write to rename them, correct?
sofauxboho said:
I'd be glad to have a few more details on how you did that. Are these the bootsamsung.qmg and bootsamsungloop.qmg files in /system/media? Or just one or the other?
You had to remount the file system read/write to rename them, correct?
Click to expand...
Click to collapse
Used root explorer, and yes, those are the right files, you only need to rename bootsamsung.qmp (you can rename both if you want, i did)
...just add .bak so the file is bootsamsung.qmp.bak
that will make it so it only shows the (not sidekick/samsung) stock android boot animation.
then you can go find different animations online to put on your phone.
This is the one im using Youtube Link
Here is the download for bootanimation
jahnbodah said:
Installed it.
Boot animation plays BOTH, stock AND bootanimation.zip
fixed that by renaming stock boot file with .bak at end.
but the startup sound still plays... cant figure out how to get that to shutup... any suggestions?
EDIt: just curious... how would one undo a kernel install? is there a stock kernel download for SK4G?
Click to expand...
Click to collapse
To silence the startup sound just add ".bak" to the "PowerOn" files in system/etc.
It would be really cool if you make a version that doesnt use the stock boot animation and just the normal sidekick boot animation... other than that great job my phone is really fast now
Found a bug... The universal status composer in the notifications bar doesn't work properly... if you type something short like "test" it works fine but something long like this whole post it won't show the whole thing. It will just cut it off. PLEASE FIX
Works like a dream. Wonderful job team. I can now simultaneously text 10 females at a time without force closes <3
The Pope of Dope said:
Works like a dream. Wonderful job team. I can now simultaneously text 10 females at a time without force closes <3
Click to expand...
Click to collapse
can you test the post above yours to see if its the kernel causing the bug?
I tried it..... I copy paste your paragraph and it only showed the last sentence
Sent from my SGH-T839 using XDA App
jomarxx said:
I tried it..... I copy paste your paragraph and it only showed the last sentence
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse
Same thing here... so it is the Kernel... Now I need help getting the dev to see the post so he will fix this. I would like to use this kernel with as little bugs as possible
1.2 ghz
How did u overclock ur kernel to 1.2 ghz. I need some of that action
Continuing from where JP had left, here is the latest update of the CM7.2.0 Rom. This release is based on Waleed's CM7 and JP's Cm7.2 Rom.
Credits:
Waleed for CM7 build.
Gm007 for the Initial Rom Build.
Utter Chaos team for the UC V9 Kernel Sources.
Diamondback for Virtuous OC-I/O Scheduler. (in v1)
Smokin1337 for AOSP modifier (in v1)
Tsubus for Ilwt OC controller.
Dipu K for Adding IO Scheduler option to Ilwt OC controller.
Changelog:
Giy_Cm7.2 V1
Reverted to default Adw Launcher.
Removed Ics Mixed Theme.
Added Ice9 Ics theme.
Added Utter Chaos UC9 Based Cm7 kernel.
Added Virtuous OC-I/O Scheduler Setting.
Default I/O Scheduler : cfq
Wake Settings : 300/1000/SmartAssV2.
Sleep Settings : 300/300/Powersave.
Added Various init.d tweaks
Added Nama's gps patch.
Added Dsp Manager.
Giy_Cm7.2 V2
Added Intellidemand and Lionheart governors to Kernel.
Improved Sound quality.
Little improvement in battery performance.
Removed Virtuous OC-I/O Scheduler Setting.
Default governor is Smartassv2 and Deadline is default scheduler.
Faster and more smoother.
More leaner (removed some not required apps).
Included ILWT app which allows to set cpu profiles.
Latest market app Google Play, Included.
Installation:
Download the Rom and Google Apps if desired.
Copy the ROM and Google Apps Zip to external sd card of your mobile.
Go to Cwm recovery.
Flash the zip. (Clean flash desirable but not Mandatory)
If not a clean flash, Backup apps and do a "wipe data/factory reset" from cwm recovery.
Reboot.
Flash the Google Apps zip from Cwm recovery.
Reboot.
Change Governor and I/O Scheduler settings: (for v1)
Run terminal type "su" without the quotes.
Then type "voc" without the quotes.
Make your selections.
Note:
The installer automatically converts system partitions to ext4.
All that worked with Waleed Cm7 will work in this Rom too.
Downloads:
The ROM:
giy_cm7.2_v1 (03/03/2012)
giy_cm7.2_v2 (10/03/2012)
Google Apps Link (Check here or here for updates)
Cm7/Miui Kernel
ganesh_ker_uc_1.2.zip
ganesh_ker_uc_1.2_v2.zip
Screen Shots:
Credit: (HeathenMan) Link
Tweaks
Improve Cm7 Battery Life LINK (Don't know if it works)
To-Do Next
Phone Vibration strength.
Voice search & Voice dialer.
Wifi tethering.
Useful Links
Governors and Schedulers
Cyanogen 7 Walk through Guide
How to Transfer Files between Android & Computer (Wireless) using SwiFTP.
How to Use ILWT CPU Controller:
Go to General Settings
Click "Install ILWT OC Daemon"
Click "Create Config"
Here you can set up 5 profiles: wake/sleep/charge/temperature/battery.
Once the profiles are setup, click on "Start ILWT OC Daemon"
If it starts properly, the daemon pid will be indicated in green.
Updated ILWT (Credit Dipu K):
Dipu K has modified the ILWT OC controller and added option to setup IO-Scheduler, which was missing in the original. To use this completly uninstall ILWT along with the Daemon.
New ILWT OC Scheduler. (Updated 16/03/2012). The options are more streamlined and easier to understand.
How to set I/O Scheduler:
Click Menu
Go to Settings
CyanogenMod Settings
Performance
Cpu Settings
Available I/O schedulers.
Select the I/O scheduler you want.
Phone Soft Boots when installing apps:
Do a factory reset and flash again.
Try factory reset from CWM recovery, if it does not work, do from within the phone.
Status bar on top:
Go to Settings - CyanogenMod Settings - Tablet Tweaks Uncheck "Bottom Statusbar"
Clock not visible:
Go to Settings - CyanogenMod Settings - Interface - Statusbar Tweaks - Clock Color.
External Sdcard to Samsung Default:
Before flashing this zip, make sure that the sdcard points to internal sdcard.
Download the zip and flash it from cwm recovery.
It creates /sdcard/external_sd folder and mounts the external sd card on this folder.
LINK - Giy_Cm7.2_ExternalSdCard_Samsung_Default.zip
External Sdcard to Samsung Default - Swap:
Before flashing this zip, make sure that the sdcard points to internal sdcard.
Download the zip and flash it from cwm recovery.
It creates /sdcard/external_sd folder and mounts the internal sd card on this folder. External Sdcard is mounted on /mnt/sdcard.
LINK - Giy_Cm7.2_ExternalSdCard_Samsung_Swap.zip
Amazing.
Thanks !!!
Good luck Ganesh
Great work Ganesh
But one thing about which I always think that all AOSP roms like cm7, cm7.1, cm7.2, cm9 & miui have same bug i.e. only picture mode is working in camera & no hd vdo recording. I know that in ICS its very difficult due to drivers not available for our chip. But at least in cm7 roms we must look into it. We must now concentrate on how we can get work done camera hd vdo recording by all possible ways. If once we achieve it all then it will be a big step for aosp roms
Its just my point of view guys. May be its wrong. Plz ignore it if u feel its not important.
Thank You
vishal24387 said:
Great work Ganesh
But one thing about which I always think that all AOSP roms like cm7, cm7.1, cm7.2, cm9 & miui have same bug i.e. only picture mode is working in camera & no hd vdo recording. I know that in ICS its very difficult due to drivers not available for our chip. But at least in cm7 roms we must look into it. We must now concentrate on how we can get work done camera hd vdo recording by all possible ways. If once we achieve it all then it will be a big step for aosp roms
Its just my point of view guys. May be its wrong. Plz ignore it if u feel its not important.
Thank You
Click to expand...
Click to collapse
i totally agree with you,video rec is all we need to be fixed,would make these aosp rom's easy for everyday use,even tho i do use miui,i miss video recording,battery consuption is second place,everything else is not important.btw just i question i cant get dps manager to work,i get fc every time,i used dpsmanagerformiui.zip,also tried manually moving to system/app.
Good to c you work on cm7.2 will edit this post with feedbacks for all new versions u release downloading now
Edit-Flash procedure KPE+pit>kpu>universal cfroot by amit>CM2.7 zip>fact reset,cache,delvik,battery stats ! everythings smooth as butter ! gps shows 2 satellites at north and dont scatter seems like it needs gps tweaks ! battery is gud more bout battery later. music is same as in last version ! dsp works great no fc till now calls sms everything is great
Edit:2-v2 has several improvements .. audio quality seemed same to me. other than that the status bar is at the bottom (can b switched to back on top ) it has a soft back key the phone is definitely faster now ! VIBRATION IS FIXED apps launch 5x faster than stock roms settings has the option to enable mobile bravia engine dono if it works though and touch sensitivity is MUCH MUCH MUCH better now
Cool,i love CM kangs!Is this recompiled from source?
Btw,can u include some cherry-picks from gerrit?
Thanks
can install in any stock rom?
devilfromheaven said:
can install in any stock rom?
Click to expand...
Click to collapse
Yes, U can, just follow the procedure.
Have you tried fixing the vibrator.
And can you add legacy audio next time?
Sent from my GT-I9003 using XDA App
Great work, Ganesh. Thanks a lot. Installed CM7.2 and it's very smooth. Keep it coming Cheers
@Tarun,
Vibration is still the same
rockyseenu said:
Great work, Ganesh. Thanks a lot. Installed CM7.2 and it's very smooth. Keep it coming Cheers
@Tarun,
Vibration is still the same
Click to expand...
Click to collapse
Its an issue. Looking into it.
Can someone pls confirm working of GPS by default?
It was not working for me and replacing gps.ko from MIUI V9 did the trick.
Also i flashed Vurrut kernel v3 and no issues so far.
Edit: Sorry - i didnt noticed shiroman's post on GPS, so think the problem is only for me. I didn't do a clean install probably that's the reason.
Thank you, Ganesh.
Can someone port this to our device ?
Great work man!
anuraagkochar said:
Can someone port this to our device ?
Click to expand...
Click to collapse
If "OUR" device means Samsung Galaxy SL, then if you read the OP properly you will get your answer.
If you meant for some other device then its best you ask in the section meant for your phone.
Any success for wifi tethering? Any solution?
via i9003, powered by JP_MIUI
No deep sleep?
At OP description says "Sleep Settings : 300/300/Powersave."
Do this means that phone have not deep sleep mode?
could u kindly improve the network connectivity as well?
thank you for your effort
This is the official thread of my SkyHigh kernel for the Samsung Galaxy S Plus aka GT-I9001. V1.5 is my final release, please read the FAQ in post #2 for more details. Please refer to post #3 for changelogs of new releases, all available downloads are at the bottom of this first post. If you don't know how to get back to stock kernel you MUST NOT install this !
Disclaimer: this piece of software is not for the unexperienced and might bring you in a situation you can't resolve yourself. So don't use it if you fear the potential danger of bricking your device. I am responsible for nothing related to this kernel and therefore won't help. If you decide to use it anyway you agree to be ultimately responsible for all consequences that may occur. So you have been warned !
Terms of use: Remember the power of reading ! If you can't find some particular information on the first page use the search function, it is your best friend.
Besides there are even guides and tutorials all over the forum and in most cases your question was already answered.
If you take a moment and read through the WHOLE post below and a few more moments to read some of all the stuff in other device related threads of this forum, you will find ALL you need just there.
It's not invisible so you CAN find it. And forum rules and good manners tell you to do it exactly like this. And I WILL ignore every question that is already answered here.
Obey the rules !
Kernel feature list
- OC up to 1.8 GHz, UC down to 122 MHz (customisable eg. via AnTuTu CPUmaster/SetCPU)
- Undervolted (750 mV minimum) with VDD support (customisable eg. via AnTuTu CPUmaster/IncrediControl)
- many CPU governors included, smartassV2 is default
- many I/O schedulers, SIO is default
- optimized for high performance AND extreme low battery usage
- JFS and CIFS support
- TUN included (VPN support)
- cleancache (up to V1.4d)
- increased loudness
- all useful Thunderbolt and Adrenaline Shot main tweaks combined, optimized for I9001 and integrated
- init.d support (use carefully, because tweaks are already integrated, installing/executing them twice can result in strange failures)
- Thunderbolt's LMK60 addon (aka adrenaline shot's supercharger V6 tweak) already built-in, DO NOT install separately !
- Thunderbolt's remount script integrated
- Thunderbolt's zipalign script integrated
- Thunderbolt's graphics addon integrated
- Thunderbolt's binary addon integrated
- Thunderbolt's sqlite addon integrated
- Thunderbolt's screenstate_scaling script not included but compatible
- enhanced 3D graphics (updated internal kernel drivers)
- I8150 GPU libraries included in CWM package up to V1.4d, optional in V1.5
- custom bootanimation support (animation NOT included, place your own here: /system/media/bootanimation.zip)
- custom bootsound (/system/etc/PowerOn.wav)
- sdcard speed increased
- improved jpg quality for better camera pics
- GPS faster fix in V1.4x only
- in V1.5 stock GPS files are untouched
- and some more which I already have forgotten
This kernel is meant for use with ANY Gingerbread stock ROM and custom ROMs as well (i.e. Android V 2.3.x only !). To prevent compatibility problems with custom ROMs that include system tweaks like Thunderbolt and Adrenaline Shot any existing init.d folder will be purged while installing the SkyHigh kernel. This is not a bug but a mandatory feature !
If you think you have an important script you will still need with SkyHigh like the screenstate_scaling script, copy it to your (internal) sdcard first then copy it back to the empty init.d after installing SkyHigh.
init.d support means that SkyHigh kernel will execute any scripts inside a folder /system/etc/init.d automatically but obviously only if these exist.
If you are using a custom ROM without init.d folder or any stock ROM you might have to create the init.d folder yourself. For more details there are tutorials in this forum.
Install instructions:
1. If you don't have CWM (FeaMod Recovery) install this first. If you never heard of that learn all about it here:
http://forum.xda-developers.com/showthread.php?t=1331164
2. Now make a complete nandroid backup of your phone with CWM
3. Download the attached CWM zip package
4. Copy it to your internal sdcard
5. In CWM choose "install zip from sdcard", then "choose zip from internal sdcard"
6. Select the downloaded file "GT-I9001_SkyHigh_kernel_V1.x_CWM_signed.zip"
7. Confirm install with "Yes"
8. Wait till you see the message "Reboot to use SkyHigh kernel V1.x !"
9. Do so like the message says.
10. On first boot this may take a while. You will see the Samsung logo and then a black screen for at least 2 minutes up to 5 minutes. If this happens hang on, don't touch anything and don't switch the phone off or pull the battery. This would most probably break your ROM !
11. Usually many files and databases are optimized on first boot but eventually you will see the lock screen or PIN dialog. Then you are all set and beginning with the next boot this will be much faster, promised
Remark: especially on preoptimized (custom) ROMs this won't happen since there's not much to optimize. So it's no bug but a feature when it doesn't happen and your phone boots up in less than a minute
If you want FeaMod Recovery together with SkyHigh kernel just follow the install instructions above. Install desired version of FeaMod first and then SkyHigh. You will end up with the combination you wanted.
If anything went wrong during install just try again.
If you have any issues with your sdcard(s) this is not due to SkyHigh or its install procedure. I will never ever even touch your sdcard(s). But it is always a good idea to have a rather current backup of the sdcard(s) handy. CWM makes no backup of these, so you have to do that manually.
If your phone doesn't boot even after 10 minutes waiting (see step 10.) or you end up with a damaged system because you didn't wait long enough just go back into CWM and restore the backup you made.
If you can't boot into recovery anymore just install FeaMod 1.2 via Odin again.
If you got severe errors AND didn't make a backup because you knew better than the developer don't even dare to beg for help.
If you encounter any other errors report them here but be sure that this is no feature or problem that was already described above or in the FAQ below.
While V1.3 lacks some of the features above (especially the Thunderbolt/AS tweaks) it is totally safe with sd cards, at least I never got a single report on that issue. The older V1.3 is still added as attachment for your convenience although V1.4d already fixes all sd card problems.
FAQ
For personal reasons resulting in a tremendous lack of time I have to pause all my xda development for an indefinite time. Sorry about that, but I also really can't answer all the questions you might have so please stick to this FAQ and otherwise ask other experienced users/developers in Q&A section.
Besides I'm planning to get a new phone device in just some months so this also means that SkyHigh V1.5 is my last contribution to the i9001 development section. So SkyHigh V1.5 is provided AS IS and there will be no further support whatsoever on my behalf. But V1.5 was beta tested thoroughly for about 3 weeks by several experienced users here before it was published so it is very unlikely that there are still any crucial bugs in SkyHigh V1.5.
Last but not least broodplank1337 offered to maintain SkyHigh in the future but since he is also quite busy please don't press him and give him the time he needs to answer any requests.
Thanks to all members who respect the work of the developers and obey the forum rules for a great time and experience, maybe we will see again one day in another device section on xda-devs.
1. Q: I have sd card issues with SkyHigh kernel, what can I do ?
A: This was fixed in V1.4d, don't use any other 1.4 version ! For more details please refer to post #190 (http://forum.xda-developers.com/showpost.php?p=24247858&postcount=190) first, then have a look at the changelog (V 1.4d) below in post #3.
2. Q: What's the status of my CM7 port ?
A: this is a very complex topic and I paused the development in mid March in favor of this improved kernel. I continued on CM7 for about two weeks in April but now I had to stop it permanently (see first sentence of this FAQ).
I lost any contact to YardE since months so I guess he also surrendered his i9001 development. I still supported some very dedicated users with my knowledge and experience to help them to continue the CM7 porting project but none of them is an advanced developer or even coder so they are all still in learning phase.
3. Q: What about the car dock recognition ?
A: The card dock is not recognized correctly in any custom i9001 kernel that is compiled from Samsung's original i9001 source codes (Linux kernel version 2.6.35.7). However the phone will be at least charged in the car dock with kernels that are compiled from Linux version 2.6.35.14. SkyHigh V1.5 is mainly based on 2.6.35.14 (with some exceptions for Gingerbread compatibility reasons) so the charging works with SkyHigh V1.5 (only). This was tested and verified by Rhonin86, thanks mate.
4. Q: How do I provide a log for debugging ?
A: You must be familiar with adb to do so, if you are not you can only read the adb guide and learn everything about it here:
http://forum.xda-developers.com/showthread.php?t=879701
Then use the following commands to generate two different log files:
Code:
adb shell "dmesg > /sdcard/log.txt"
adb logcat > logcat.txt
If the first command results in a permission error try this:
Code:
adb shell su -c "dmesg > /sdcard/log.txt"
5. Q: Is Script Manager needed to run any scripts in init.d or bolt_scripts or somewhere else ?
A: Not at all. You can delete bolt_scripts if you still find that on your sdcard or somewhere else. You can uninstall Script Manager if you like. And screenstate_scaling script (or any other) will run automatically if copied to init.d with correct file permissions (755 or rwxr-xr-x)
6. Q: May I use SkyHigh kernel with my own custom ROM and publish that on xda-dev ?
A: Of course you can if you don't ask for money for your ROM. This is not a piece of proprietary commercial rip-off nonsense and must not be (re)selled. I am glad if you find it useful, but leave it well alone if you don't like it
7. Q: What are the best cpu governors, i/o schedulers, overclocking and undervolting settings and so on ?
A: the default ones ! Don't touch anything here if you are not 100% sure what these settings do and how they will help you. The given settings base on over 5 month experience and testing on my own i9001 and some others. But as stated in post #190 no two phones are exactly the same so not all of our phones work best with the very same settings. Therefore I added the possibility to customise all these settings if really necessary. But you shouldn't change any of these settings at all if you don't have severe kernel related problems with your phone.
8. Q: The feature list says that bootanimations are NOT included but supported. After I installed version 1.4/1.5 I've got a new bootanimation
A: that's not a new animation, that is just one that was already in your ROM before (in /system/media/bootanimation.zip) but never showed up so far. Most probably it got there with a custom ROM or UOT kitchen or any other mod/app that supports the android default animations. This file normally isn't used on the i9001 because Samsung implemented a proprietary bootanimation method. SkyHigh reverts the Samsung bootanimation procedure to the android default one which is also used on AOSP ROMs like CyanogenMod. So this is also one of many necessary modifications to make a kernel AOSP compatible !
9. Q: How do I install a custom bootanimation ? All my attempts failed.
A: look at FAQ #8 above and at kernel feature list in post #1 !
Changelog
Final update to V1.5 and V1.5bm [08-02-13]:
- source files updated from original patch level 7 (Linux kernel version 2.6.35.7) to patchlevel 14 (Linux kernel version 2.6.35.14). This can be regarded similar as a service pack release of Windows (more stability and less bugs overall)
- especially kernel GPU drivers for the Qualcomm Adreno 205 chip are more stable on my device (had some issues with one app that was solved by this update)
- also the car dock driver is improved, battery is now charged in Samsung's original car dock (though car dock mode still isn't activated, see also FAQ #3 above)
- EGL graphics libraries that come with SkyHigh V1.4x (these libraries are OUTSIDE the kernel, but included in the CWM install package) are EXCLUDED now and only come in an optional library pack (because these are the only ones that have at least significantly better performance in benchmarks, but some users say they are more laggy in everday use).
This means for V1.5 that everybody can decide for himself if he wants to use the EGL libraries that come with his ROM or the i8150 libraries or even any other versions that he will just install himself. More details can be found in post #566 http://forum.xda-developers.com/showpost.php?p=37391142&postcount=566
- faster GPS fix that comes with SkyHigh V1.4x was also EXCLUDED since it didn't work for some people. SkyHigh V1.5 doesn't even touch any GPS related files or drivers, there is just the original Samsung stock driver inside the kernel, nothing else.
But after installing a new kernel or ROM the first initial sat fix usually takes really long (2-5 minutes). This is normal ! But after that it should be faster, about 5 to 60 seconds depending on factors like position, movement, shielding and so on.
So if you have any GPS issues it is NOT due to the kernel but due to your (custom) ROM or any other GPS related factors (and there are many). Please refer to the following posts to learn more about possible GPS issues. These posts were only meant for V1.4x since only this version replaces gps.conf but they also provide some general details about GPS issues: http://forum.xda-developers.com/showpost.php?p=24301498&postcount=205 and here: http://forum.xda-developers.com/showpost.php?p=24565586&postcount=319
- finally there is a separate BigMem edition of SkyHigh called V1.5bm
This BigMem edition provides 376 MB available internal memory but breaks 720p video recording on some devices. While it still works on some devices there are rumors that it is also still possible on any device but by some alternative method. I never tested nor even used 720p recording on my own device since with such a poor camera it is totally pointless to even try HD recording IMHO. So if you want SkyHigh V1.5 WITH 720p video recording you have actually 3 choices:
1. you are lucky and everything works with V1.5bm anyway
2. try to find an alternative solution for video recording, maybe another camera app or a custom ROM is the solution. BTW: hiej claims that it works on his device with BigMem edition, maybe it's a feature of his GingerRevenge ROM so you should test that one first
3. just use the normal V1.5 of SkyHigh, it has 359 MB available memory which is still better than the stock kernels
Update to V1.4d [06-04-12]:
- sdcard problem fixed
In prior 1.4x versions the external SD card is suspended ("ejected") when the phone goes into sleep mode. On some phones the automatic re-detection of the SD card fails several times at wakeup so that it can't be accessed any longer. No data is corrupted though and reboot of the phone or reinsertion of the card are possible workarounds. As this is not practical in everyday use V1.4d solves this sdcard issue by reverting the sdcard power management routines to the original Samsung source version.
Just to be on the safe side I recommend everyone to use this modified V1.4d instead of V1.4 even if you have no sdcard issues so far. At least I do so
Update to V1.4c [06-04-12]:
- obsolete
Update to V1.4b [05-04-12]:
- obsolete
Update to V1.4a [02-04-12]:
- obsolete
Awesome! This is without doubt the best i9001 kernel so far, I really like it in my ROM, thanks for this great kernel
(by the way, is this version different then the one you send me to use in the kernel?)
Sounds amazing! This is the same one in broodrom 4 or is this updated?
So far it is working perfectly for me.
Thanks!
Richie
Sent from my GT-I9001 using XDA
no good for me.. hangs and reboots with simplistic F1
broodplank1337 said:
Awesome! This is without doubt the best i9001 kernel so far, I really like it in my ROM, thanks for this great kernel
(by the way, is this version different then the one you send me to use in the kernel?)
Click to expand...
Click to collapse
The kernel is the same but I fixed the install script
skywalker01 said:
The kernel is the same but I fixed the install script
Click to expand...
Click to collapse
Ok great won't need to change it then for now ^^
carlese said:
no good for me.. hangs and reboots with simplistic F1
Click to expand...
Click to collapse
AFAIK simplistic F1 uses FeaCore kernel nonOC which means your phone doesn't like OC/UV kernels. As SkyHigh is OC/UV you can't use it unfortunately, sorry.
skywalker01 said:
AFAIK simplistic F1 uses FeaCore kernel nonOC which means your phone doesn't like OC/UV kernels. As SkyHigh is OC/UV you can't use it unfortunately, sorry.
Click to expand...
Click to collapse
cranium v6 works good with simplistic..
carlese said:
cranium v6 works good with simplistic..
Click to expand...
Click to collapse
OK, if you can provide me some logs I can have a closer look into that, maybe it also applies to others.
But I will need the output of these two adb commands:
Code:
adb shell "dmesg > /sdcard/log.txt"
adb logcat > logcat.txt
If the first command results in a permission error try this:
Code:
adb shell su -c "dmesg > /sdcard/log.txt"
WOW - THX for your work
Hi Skywalker01,
nice to see the resuts of your intense work. Will try it later due to the fact that work is calling
By the way did you find a way to make the kernel recognize the original charging dock meanwhile ? Or if not is it still in your focus ?
I wish you success porting CM and keep on your good work.
Cheers
Rhonin
thanks for the kernel
i can't mount my sdcard in cwm. i currently use this kernel with brood rom.
first time i had this problem was after installing vitaliys kernel. changing kernel and doing a hard reset via *2767*3855# helped (as you can imagine you can't reset it in cwm since you have to mount the sdcard which doesn't work). so i got the suspicion that this is a kernel issue.
i know you said
If you have any issues with your sdcard(s) this is not due to SkyHigh or its install procedure
Click to expand...
Click to collapse
but i'm not sure if this is what you mean since you made mods on the sdcard.
your kernel is amazing sky. i think you made the best kernel for 9001. my phone is like an f-16 because of your kernel
awesome kernel <3 (i got a little question how is the CM7 development going?) (offtopic)
skywalker01 said:
...
- init.d support (use carefully, because tweaks are already integrated, installing/executing them twice can result in strange failures) ...
Click to expand...
Click to collapse
So this means we don't need SM to run all init.d scripts run at boot?
Sent from my GT-I9001 using Tapatalk 2 Beta-2
Hi
Tq for ur kernel...its very amazing the music sound wad better..keep it up bro...
Sent from my GT-I9001 using xda premium
Seems like i am building a new version of Simplistic afterall. Thanks a lot for the great kernel!
Sent from my GT-I9001 using Tapatalk
Woow this sounds promising. Im gonna use it for my ROM if you don't mind...
Sent from my GT-i9001 @ LionROM
How's the battery like with this one?
Hi all
Introduction
I cannot call myself a developer or a kernel master at all. I'm just good at discovering and learning new things and in fact that's the way my journey with kernels started. At this point I want to start a new thread for something different from my earlier work, porting Boeffla kernel.
Features included:
Compiled with 4.9 Linaro toolchain
CPU OC up to 1600Mhz
ZZmoove as default governor (with moderate profile) - best for smoothness/battery life
Zen and Row I/O schedulers
Undervolting interface introduced
Configurable Touchboost
Configurable Touchwake
Charging interface
Boeffla Sound 1.6.6
Dynamic Fsync
Switchable Sharpness Tweak
Led configurable (fading, strength)
Configurable Android logger
Configurable printk logging
Readable: asv level, CPU temperature
Disabled some debug
Few minor tweaks (check github if interested)
If I forgot something - Github is up !
What kernel features may we expect?
F2FS support
Dualbooting support (if I can handle it properly)
What you say?
Compatibility
Flash only on proper roms!
As for now we have only Lollipop version, compatible with NamelessRom (you may try with others LP).
Download
You can download the most recent kernel here -> Click
Source
Github link - Click
Credits
These men never refused to give me a helping hand, advised me what to do and, more important, without their work this kernel wouldn't even exist (opensource doesn't mean no respect!).
@JustArchi
@Lord Boeffla
@Yank555
@ZaneZam
@arter97
Samsung :good:
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can't and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in CWM recovery and safely store your personal data before you flash anything.
Camera bug info: (hidden, only applies to Samsung ROMs)
It appears that some people (like me) have problem with camera. In exactly THIS situation: do full wipe, flash sammy rom+boeffla kernel, reboot and launch camera. Effect? Camera closes with "camera failed" popup.
Possible solutions:
Option 1 is good for people that rarely change their ROMs (and it fixes EVERYTHING), whether option 2 is better for people changing their ROMs more frequently (however, it's always good to have backup of your SlimISP on sdcard).
Option 1. Flash Sammy Rom with stock Sammy kernel, run the camera, take a photo, then reboot to recovery and flash my HboKernel
Option 2. Flash Sammy Rom with stock Sammy kernel, run the camera, take a photo, grab file (SlimISP_XX.bin, where XX differs between phones) from /data/cfw/ and backup it where you want. Then if you can always copy it to /data/cfw if your camera doesn't work with my ported kernel. (ATTENTION: Unfortunately this file does not always appear - still don't know why )
Option 3. Read this thread and follow steps --> click
Possible explanation, my own research:
I found out that people with ZD and GD will have camera working always. Why? Because these (SlimISP_XX.bin, where XX differs between phones) files are packed within kernel (zImage exactly) and ONLY THESE two are provided by Samsung in their opensource release... Interesting, isn't it? For example, I have GH version, which I may add to zImage manually, however adding more of them breaks the size limit for boot partition, so it's impossible to have all these versions together. However, stock kernel somehow has them, don't know how because zImages aren't extractable.
And just to confirm my theory, I've compiled a kernel with mine version of camera firmware, made full wipe, installed sammy rom+my kernel, rebooted, launched camera and voila - it worked
Thus, we has to live with this bug unless Samsung do something about it or someone else proves me that I'm wrong
I say, may good luck be with you accomplishing these features in the kernel :good:
Best of luck with this project Hbohd
Thanks to you, there is some life potential remaining for i9305!
Long life to i9305 and may the (dev) force be with you HboHd!
Thanks for your work!
+1 Nice one.
Hbohd said:
What you say?
Click to expand...
Click to collapse
I say: it's freaking interesting!!!!
Just a supposition , for the future , the MDNIe hijack for more natural colors would be great , i'm waiting the F2FS version to switch to NI3
aaz03 said:
Just a supposition , for the future , the MDNIe hijack for more natural colors would be great , i'm waiting the F2FS version to switch to NI3
Click to expand...
Click to collapse
Hmm.. Isn't 'Screen mode' under Display settings enough? It gives a little bit of difference without need of additional kernel's code modification.
New alpha 0.1
Okay, to keep this project alive, to show off some progress step by step and to satisfy flashoholics - I've decided to release my small achievements in form of alpha kernels
Firstly, let's restart naming convention of the kernel. It will be simple x.x now, starting from available below 0.1 version :cyclops:
Small changelog:
removed debugging in many places
compiled with linaro 4.9
few tweaking commits
Let's say that due to my 'stupidity' or magic ability to forget something, I've spent on it many hours today :silly:
Is Insecure ADB fixed?
Just gave the new version a flash, insecure adb wasn't set. I've fixed it up and attached it.
@Hbohd if you want to patch this in later veresions, make these changes to the /ramdisk/default.prop
- change ro.adb.secure=1 to 0
- change persist.sys.usb.config=mtp to mtp,adb
then just copy the adbd file from my /sbin
This is for old bootloader only?
SE disabled on 0.1?
it says nothing in system anymore below build
you should maybe consider a txt file in the zip and jot into it every time you change something before you forget
v0.2
tweaked this
added that
etc..
@Hbohd tks for your excelent work!!!, one notice, the I9305 didnt charge the battery when is off. Only, starts and boots normally, and there starts charge. Its only a detail, but in my case Important. Tks again for your work!!!!
ShonkUK said:
SE disabled on 0.1?
it says nothing in system anymore below build
you should maybe consider a txt file in the zip and jot into it every time you change something before you forget
v0.2
tweaked this
added that
etc..
Click to expand...
Click to collapse
sham79 said:
This is for old bootloader only?
Click to expand...
Click to collapse
I haven't stated anything different from what is true I mean, if I write that you can you use it with new bootloader or SE is disabled - then it would be true
I think that in next release I will disable it (simply forgotten due to my compiling problems mentioned earlier).
Oh, and I don't need another changelog when everything is written in the git I haven't just suceeded in uploading it to the github yet :/
machotecba said:
@Hbohd tks for your excelent work!!!, one notice, the I9305 didnt charge the battery when is off. Only, starts and boots normally, and there starts charge. Its only a detail, but in my case Important. Tks again for your work!!!!
Click to expand...
Click to collapse
Yeah, someone mentioned it already. I will try to fix it for next version, thanks!
djb77 said:
Just gave the new version a flash, insecure adb wasn't set. I've fixed it up and attached it.
@Hbohd if you want to patch this in later veresions, make these changes to the /ramdisk/default.prop
- change ro.adb.secure=1 to 0
- change persist.sys.usb.config=mtp to mtp,adb
then just copy the adbd file from my /sbin
Click to expand...
Click to collapse
Will be in for the next so-called 'alpha'
Just to be sure, Is "HboKernel alpha v0.1" an update of previous "HboKernel v2" of boeffla thread ? Same source + small changelog you @Hbohd mentionned in post #10 ?
fpriot said:
Just to be sure, Is "HboKernel alpha v0.1" an update of previous "HboKernel v2" of boeffla thread ? Same source + small changelog you @Hbohd mentionned in post #10 ?
Click to expand...
Click to collapse
Yep, you are right
If I may suggest @Hbohd... Could you please start with the power features implementation? Charging rates, ignore unstable power and margin...
Because these are the ones I really miss... My chargers and/or cables are not good and I need these mods to charge properly...
Thanks!
Firsty thanks for all your hard work.
The phone no longer charges from the car dock. This was the same for the stock kernels in 4.1.2 & 4.3 - still withold bootloader. 4.1.2's was fixed with Pegasus kernel and 4.3 was fixed by your Beoffia 5 kernel.
[Q&A] [KERNEL][3.4.105][12/09/14] UBER-L | LINARO & SaberMod 4.10 -OFast Graphite F
Q&A for [KERNEL][3.4.105][12/09/14] UBER-L | LINARO & SaberMod 4.10 -OFast Graphite F2FS
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][3.4.105][12/09/14] UBER-L | LINARO & SaberMod 4.10 -OFast Graphite F2FS. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Thanks
@Cl3Kener: Big thanks for your hard work. Installed your kernel yesterday, and can definately see some improvements.
@ramjet73: Big thanks to you too. I followed your posts/instructions and flashed rastapop+uber and am happy i finally took the plunge.
Now for my question: I have the tricksterMOD and I can't see any color profiles (except the default). How can I apply other profiles? I only see one.
Regards,
On LiquidSmooth LP 4.0 with UBER-L 3.4.105
Governer = optimax
Scheduler = zen
Read Ahead Buffer Size = 3072
Everything is running smooth and fast! Good battery life!
Low brightness after install
Hello, I gave a question... When I installed a last Uber kernel L v4.10 from 9 December of 2014... I have a very low brightness... How can I fix it...
Also I cannot make OC more than 2.7 or 2.8 ... Phone doesn't boot... And how I can fix it...
Thank you for a answer
Hi,
is it advisable to disable filesystem trim in ubers cfg file while using f2fs?
Chet says, F2FS is auto-trimmed: https://plus.google.com/app/basic/stream/z13cxltwwqjcsx3ta22pyx5reobgudsiq04
Are there any negative consequences for clocking the minimum frequency at 96MHz?
Usb-otg f2fs
I'm currently using the latest version of UBER-L kernel (01/01/15).
I have formatted my Micro USB to F2FS and would like to use it with my phone. TWRP recognises the USB and mounts it successfully, but the ROM (OptiPop) does not mount the USB. Both mount the USB fine when it is formatted to FAT32.
Is it possible for me to use F2FS using USB-OTG?
Thanks.
Edit: Got it working by using the 'Stickmount' app. ^_^
FloGatt said:
Hi,
is it advisable to disable filesystem trim in ubers cfg file while using f2fs?
Chet says, F2FS is auto-trimmed: https://plus.google.com/app/basic/stream/z13cxltwwqjcsx3ta22pyx5reobgudsiq04
Click to expand...
Click to collapse
I disabled trimming and I dont see a difference with f2fs. I would conclude that it isn't necessary with f2fs
Is there changelog of the new kernel version?
FloGatt said:
Is there changelog of the new kernel version?
Click to expand...
Click to collapse
Its all on github. The link is on the OP of the original thread. (The one with the download links)
GPU clock not going above 450MHz
Hey, I'm using this kernel (latest version as of now), on a clean flash of Optipop (also latest as of now - 11/01) with F2FS.
I set the max gpu clock to 650000000 in the uber_v1.3.cfg file in /etc
(also by terminal as in the 2nd post just to be sure) (echo "650000000" > the path and all)
Apps like System Monitor Lite and CPU-Z confirm that the max gpu clock is 650Mhz (Adreno 330 @ 650Mhz).
I have also set the performance governor (in the config file, and I tried via synapse + UKM 3.6.1 too) (I have set synapse not to apply settings on boot, so that should not be interfering with the init config of uber kernel until I set something in it.) I have no other kernel tweaking apps anyway.
However, the clock only goes up to 450MHz no matter what. It goes directly to 450 when touching the screen due to the performance governor, so I know settings are being applied.
However System Monitor, CPU-Z etc all show, current clock: 450MHz, Max Clock 650Mhz.
Even benchmarking with GFX bench gives results basically identical to the stock Nexus 5 with 450MHz, so there is no performance and FPS difference that should be there.
I searched the developer thread and found a few posts from many months ago that the gpu overclock was working properly for many people, with an appropriate improvement in FPS and benchmarks, with a couple of people also having my issue, that whatever of 650/533/450 max I apply, gpu doesn't go over 450MHz. However I couldn't find any solution.. it stopped working properly at some point between those builds when Chet introduced 533/650 and now?
I can't post in the dev thread (less than 10 posts).
This is reproducible, right after a clean boot, not a thermal issue (am not overclocking CPU, not running any CPU benchmarks, temp is less than 50C).
Hope someone can help. Thanks!
Installed Optipop back onto my N5 today. After a few hours of the phone being on the UI starts to act up then eventually needs a reboot to get back to being functional. I then flashed UberL kernel and now my screen is fuzzy and glitches out. Never had this problem in the past with Optipop or UberL. Please don't ask if I dirty flashed or deleted the android folder. I completely wipe my phone before I install a new ROM. I have been installing ROMs for a good minute now and have never seen this before. I have tried at least 5 other rom/kernel combos.....none have the same affect as UberL and Optipop. Yes I've tried F2FS ONLY Permissive Only and EXT4/F2FS Permissive and Enforcing with no luck.
Has the issue with the missing charging icon when the phone is turned off and plugged in reappeared? I have System, Data, and Cache formatted as F2FS and flashed F2FS-ONLY-Lollipop-Kernel-Cl3Kener-Kexec-Permissive.zip before flashing UBER, but I am still having this issue. Everything else appears to be running smoothly.
Is there anyway to know if I isntalled corectly this kernel ? I changed a setting in the cfg file and it seem to not change anything. For exemple,
10.2 : Double tap to wake
# -Double tap on screen to wake up the device.
# - option are:
# 0 - Diable
# 1- BOTTOM hald of screen
# 2- Full screen
DT2W=2
When i tried to doubletap the screen, nothing happened.
When i installed the kernel, i didn't cleared the cache and the ????? but it might be working Anyway. is there a way to know if its working ?
After a benchmarks i think that the kernel isn't realy doing someting. i added +50 in 3.CPU SETTINGS OVERVOLT... isn't realy doing someting.
sirarduin said:
Is there anyway to know if I isntalled corectly this kernel ? I changed a setting in the cfg file and it seem to not change anything. For exemple,
10.2 : Double tap to wake
# -Double tap on screen to wake up the device.
# - option are:
# 0 - Diable
# 1- BOTTOM hald of screen
# 2- Full screen
DT2W=2
When i tried to doubletap the screen, nothing happened.
When i installed the kernel, i didn't cleared the cache and the ????? but it might be working Anyway. is there a way to know if its working ?
After a benchmarks i think that the kernel isn't realy doing someting. i added +50 in 3.CPU SETTINGS OVERVOLT... isn't realy doing someting.
Click to expand...
Click to collapse
Confirmed. I have the same problem. Nothing in the uber.cfg file works. Its as if it wasn't even there.
JayR_L said:
Confirmed. I have the same problem. Nothing in the uber.cfg file works. Its as if it wasn't even there.
Click to expand...
Click to collapse
Format rom and then delete cache + tmp\mksh. Make sure to have a fresh ROM folder. Reinstall OptiPoP.ZIP, then flash the kernel before even boot. Now u can boot. install GA APP. Some time reinstalling work. Am lcuky...
Always do the following AFTER installing the kernel:
1. Clear cache
2. Clear dalvik
3. Fix Permissions
sirarduin said:
Format rom and then delete cache + tmp\mksh. Make sure to have a fresh ROM folder. Reinstall OptiPoP.ZIP, then flash the kernel before even boot. Now u can boot. install GA APP. Some time reinstalling work. Am lcuky...
Always do the following AFTER installing the kernel:
1. Clear cache
2. Clear dalvik
3. Fix Permissions
Click to expand...
Click to collapse
So you are saying that fixes the issue with the cfg file?
JayR_L said:
So you are saying that fixes the issue with the cfg file?
Click to expand...
Click to collapse
After 2 Benchmarks, i can say that doing this fixed MY problem. Uber/sabermod is now working realy well for the performance. Uses AnTuTU to check if its working. It upgraded a lot the performance for me.
Which governor gives me more performance?
[email protected] said:
Which governor gives me more performance?
Click to expand...
Click to collapse
performance ?! but it will drain your batterie a lot.