Galaxy Note 5 OGD/OI6/OK3 Stock Deodexed Roms
This build is based on the stock OGD & OI6 & OK3 5.1.1 Lollipop builds.
This is a first release. Even though it has been tested, please report any issues.
Features:
- Rooted
- Busybox
- SQLite
- Hotspot enabled
- Knox Removed
- ItsOn Removed
Download Link ---> N920P_OGD.5.1.1.De-Odexed.Ver1.0.zip
Download Link ---> N920P_OI6.5.1.1.De-Odexed.Ver1.0.zip
Download Link ---> N920P_OK3.5.1.1.De-Odexed.Ver1.0.zip
Changelog:
OK3 Release 12/29/15
Added screen mirroring fix
Added Netflix fix
Still uses OI6 Beastmode kernel, an OK3 pre-rooted kernel is not yet available.
OI6 Release
- OI6 brings some security enhancements and fixes nothing specific.
- Fixed access to hiddenmenu dialer codes
- stagefright vulnerability fully patched (for now)
- Beastmode v1.2 kernel already included.
Rom Installation
Preparing the stock rom
• In the stock rom, turn on developer mode, enable USB debugging and OEM Unlock
- Settings>>>about device>>> scroll to bottom and tap build number 8 times
now press back button once and tap developer options...
- Toggle on both USB debugging and OEM Unlock.
• Copy the downloaded rom.zip file to internal storage
Install Custom Recovery with Odin
• Download Odin & custom recovery tar
Odin3_v3.10.6.zip
TWRP-2.8.7.1-Alpha_N920P.tar.md5
or
philz_touch_6.59.0-820876114.tar.md5
• Extract Odin zip-file
• Power down the phone
• Open Odin on pc
• Boot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
• Connect phone and wait until you get a blue sign in Odin
• Add the recovery file to AP / PDA (depending on version of Odin)
• Make sure re-partition & Auto Reboot are NOT ticked
• Click the start button and let the Odin flash complete
• Unplug & Reboot phone directly into Recovery Mode (press and hold Home + Power + Volume Up buttons)
• BACKUP YOUR CURRENT SETUP WITH TWRP
• Do a FULL wipe but do not reboot yet
A full wipe includes:
Dalvik Cache
System
Data
Cache
• Flash rom and reboot.
Going back to the Stock Rom
• Use the same Odin instructions to flash TWRP above but using the stock tar
N920PVPU1AOGD_N920PSPT1AOGD_SPR-STOCK_TARBALL
Stock rom mirror download
N920PVPU2AOI6_N920PSPT2AOI6_SPR.zip
[ROM] N920PSPT2AOK3_SPR Stock Factory Build
Credits to my beta testers: @Chaz187 @fsunoles101 @JoeyDuran @GAPO @rlmiller @sml2004
Special Credits to: @tx_dbs_tx
For help with development, the csc & personal mode fixes.
OGD Deodexed Addons
This is not compatible with the OI6 build!
Features
- Signature verification check removed
- Custom Settings app added
- Music Skip Mod
Toggle on/off in custom settings app
- Home tripletap screenshot with toggle
- 5 Way boot menu
Credits @Chaz187 5way boot option
- Call block and call record
Credits @sml2004 CallBlocking & Call Recording
- Home Wake toggle
Download Link -- > OGD.Deodexed.Addons.v1.1.zip
__________________________________
Debloat Tool
Download from the bottom of this post.
This will remove all bloat from the stock deodexed rom.
It is ONLY for fresh flash.
The list of removed items can be found here, only the items in GREEN have been removed:
[Ref] [List: OGD Stock System Apps that are safe/not safe to remove]
Credits @tx_dbs_tx
Please thank him for the full list.
Installation:
Flash in recovery immediately after the rom, before the initial reboot.
Exceptions/not removed:
Accuweather
Gmail
Hangouts
Stock Music player
Google Search
Visual Voicemail
Additional items removed
Svoice
Note 5 Recoveries
Note 5 Kernels
Sprint Galaxy Note 5 Modems
** Modems are flashed in Odin. The tar file gets placed in the CP slot.
OI6 Private Mode fix added to the bottom of this post.
Flash in recovery.
___________________________
Extras!!!
RINGTONES/NOTIFICATIONS/ALARMS HUNDREDS of them"
SM-920P - Simple Volume Boost Mod - 9/15/15
Project Super Camera on Steriods - V4 (Updated SEP 11)
Netflix fix
AWESOME DEVELOPER ! ! !...... @tdunham Pulled this off and doesn't even have the device
WOW... Only TWO days to do it and we have the first 100% WORKING DEODEX ROM and KNOX REMOVED ! ! ! PRIVACY IS WORKING
Thanks @tdunham and also to @tx_dbs_tx for the all nighter and hours involved.
HIT THEIR THANKS BUTTON ! ! !
CREDIT FOR SPRINT BEASTMODE 1.0 KERNEL GOES TO THE ONE & ONLY @freeza Another awesome and talented developer. INFO on his kernel thread can be FOUND HERE ... BE SURE TO HIT HIS THANKS BUTTON FOR ALL HIS EFFORTS ! ! !
CREDIT FOR TWRP & KERNEL GOES TO ANOTHER AWESOME DEVELOPER!!! @Manh_IT and INFO CAN BE FOUND and ANY KERNEL BUGS CAN BE REPORTEDHERE IN HIS THREAD... BE SURE TO HIT HIS THANKS BUTTON FOR HIS EFFORTS.
This will trip knox and most likely kill Samsung pay for now ...
I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOU PHONE. ... IT IS YOUR DECISION TO TAKE THE PLUNGE.
Anyone that tries this and gets bootloops and cannot recover here is a link to the stock tar file HERE IN AFH... flash in Odin AP slot from download mode you should recover very easily or from my mediafire DOWNLOAD THE SPRINT N920P STOCK TAR HERE TO RECOVER AND/OR TO RETURN TO STOCK THEY ARE BOTH THE SAME FILE
DOWNLOAD ROM>>> https://www.androidfilehost.com/?fid=24052804347805598
Download ODIN 3.10.7
Download philz_touch_6.59.0-820876114.tar.md5
Download philz_touch_6.59.0-820876114.zip
IMPORTANT NOTE:>>>When in odin mode, to restart the phone...
Power down by pressing (vol down+power for 5 seconds) HOME NOT INCLUDED
PREP THE PHONE FIRST ...
go to settings>>>about device>>> scroll to bottom and build number 8 times
now press back button once and tap developer options...
make sure USB debugging is on AND OEM UNLOCK NEEDS TO BE ON ALSO .....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Place phone in ODIN / Download mode ( press and hold vol down+home+power for a few seconds...then release and press vol up) and plug the phone to the pc....Watch for ID:COM in top left corner to give an ID.......if none is given then check the data cable or try a different one.... NOTE: once you try a flash and "IF" it fails... you will need to disconnect and power off the phone and go back into download mode again or you will get "Setup Connection" hangup error when re-trying to flash
Now Click the "AP" button and in the pop up window, migrate to the PHILZ TOUCH FILE and double click it.
Wait for it to verify md5 checksum. If bad, re-download the file.
Now check in the OPTIONS TAB.... make sure ONLY "F. Reset Time" is checked...
uncheck Re-Partition ! ! !
Once these steps are followed, click start flash of PHILZ TOUCH and wait till you see PASS in the ID:COM Field
Power down by pressing (vol down+power for 5 seconds) HOME NOT INCLUDED
When phone is off... re-boot to recovery, by pressing and holding (vol up+home+power for 5 - 10 seconds)
"I HIGHLY RECOMMEND CLEAN FLASH" by wiping both cache's , factory reset, and wiping system.
NOW FLASH ROM
I have a SPECIAL HANGOUTS thread for SPRINT NOTE 5 OWNERS.
I would like to add ALL of you to it.
PLEASE PM ME YOUR GMAIL EMAIL ADDRESS SO I CAN ADD YOU
Runs smooth thanks alot
Thanks guys. Awesome job.
Sent from my SM-N920P using Tapatalk
@tdunham great work. Good looking out.
Sent from my SM-N920P using Tapatalk
FINALLY DONE!!! Thank You @tdunham for all the hardwork you've put into this and you dont even have the phone!!! Friggin AMAZING!!!
That's what I call an A-class tag team! LOL. We nocked it out faster than Ronda Rousey knocked out Bethe Correia the other night on UFC Fight Night! Haha!
Awesome work fellas, I'll be downloading and flashing while at work tomorrow probably. Does prl and profile update with this?
Sent from my SM-N920P using XDA Free mobile app
Exposed working...
How?
Was gonna wait to root and trip Knox . but this may have just swayed me.
Sent from my SM-N920P using Tapatalk
thanks @tdunham because of you we will have xposed, and viper working on our powerful Note 5
Shoutout to @tx_dbs_tx and @rlmiller as well for all the work you 2 put in on this site as well
almony8 said:
Awesome work fellas, I'll be downloading and flashing while at work tomorrow probably. Does prl and profile update with this?
Sent from my SM-N920P using XDA Free mobile app
Click to expand...
Click to collapse
Yes it should work fine. It's stock rom.
kirschdog1 said:
Exposed working...
How?
Click to expand...
Click to collapse
If you're asking that question you should go check out the development thread for Xposed and get caught up with it's development for 5.1.1. I "think" it has been made to work on 5.1.1 bu tdon'tquote me on that. I'm sure somebody will be flashing it soon enough and will probably post about it. You can give it a try yourself. Get Xposed support in threads designated for that. Good luck.
tx_dbs_tx said:
If you're asking that question you should go check out the development thread for Xposed and get caught up with it's development for 5.1.1. I "think" it has been made to work on 5.1.1 bu tdon'tquote me on that. I'm sure somebody will be flashing it soon enough and will probably post about it. You can give it a try yourself. Get Xposed support in threads designated for that. Good luck.
Click to expand...
Click to collapse
@wanam got it to work on the Note 5 so you sir are correct
http://forum.xda-developers.com/showpost.php?p=62377731&postcount=1
Hey guys if possible can i get some clarity here if im on a stock note 5 not rooted, how is this stock rooted rom applied? What is the process
Sent from my SM-N920P using XDA Free mobile app
Lakerzz8_24 said:
Hey guys if possible can i get some clarity here if im on a stock note 5 not rooted, how is this stock rooted rom applied? What is the process
Sent from my SM-N920P using XDA Free mobile app
Click to expand...
Click to collapse
Everything is explained on the Op... just have to read it
Considering this is the 1st rom for the Sprint N5, you are already on a non rooted stock rom until you flash this 1
Can it be specified in the OP knox is removed?
Sent from my SM-N920P using Tapatalk
Lakerzz8_24 said:
Hey guys if possible can i get some clarity here if im on a stock note 5 not rooted, how is this stock rooted rom applied? What is the process
Sent from my SM-N920P using XDA Free mobile app
Click to expand...
Click to collapse
Read my POST # 4 IN THIS THREAD......... or also see post # 1 OF MY HOW TO ROOT THREAD HERE on PREPARING YOUR PHONE FIRST.....
THEN the rest of this will make better since......
Place OEM unlock and DeBugging to ON
Download the ROM from OP to the phone
Place in ODIN/Download mode
Uncheck auto-reboot in options then ODIN flash TWRP ALPHA TAR file
DO NOT BOOT PHONE YET ! ! !
Now hold vol down+power til phone powers down.
Go into recovery (vol up+home+power hold all three for 5 seconds)
You can dirty flash BUT I RECOMMEND CLEAN BY wiping both cache's, factory reset and system.
NOW FLASH ROM
ebs512 said:
Can it be specified in the OP knox is removed?
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
KNOX IS REMOVED... I'll place in OP.
Awesome work guys! Thank y'all so much. Downloading now. Can't wait to get this bad boy running!
Sent from my SM-N920P using Tapatalk
Related
Frequent Q&A (maybe?)
Q: WHY FAQ FIRST?
A: Because, I have seen some of you guys are so lazy to scroll down a bit to read this as this is essential post I think. And further more, I don't want you to brick your phone because of your lack of reading skill .
Q: Am I advised to do anything?
A: READ THIS CAREFULLY everyone. Since I changed the partition layout for more convenient to work on kitkat or future Android so I advise you to do a oneclick heimdall back to BML first, do a full wipe except for the sdcard and then flash the kitkat zip. Once u r in TWRP, full wipe and flash the build again (with or without gapps) . I might change the partition table several times until I have the good space calculation for rom and gapps tho, so this procedure is advised/required - just took u 30s to do that tho.
I will also mark the zip/update that have another different table that required this procedure then, otherwise, you can update via dirty flash.
Link to heimdall package: AntonX's Basic with a twist kernel [BML]
And here is the recommended procedure:
1. Make backup or whatever u need then copy the ROM into ur sdcard.
2. Reboot into Recovery and full wipe except sdcard.
3. Reboot into Download mode and Heimdall oneclick BML ROM/kernel
4. Flash the Slimkat build from CWM 5.x
5. After booted into TWRP, full wipe and flash the Slimkat ROM again - use the button combo to get into TWRP if it doesn't do it automatically.
6. Reboot and enjoy!
Q: Is this Rooted?
A: Yes it is. To have the Root privileges, Go to settings>about phone>then tap build number 7 times to enable the developer settings, once enabled, under root access, choose apps and adb. That's all. (Thanks to @foxxx5oh)
Q: Why doesn't this have Focal?
A: Because Focal is not available on Slimkat.
Q: Where is 'fix permission' option in CWM?
A: I believe koush decided to throw away the fix permissions button in CWM because he said it was largely placebo effect and had no real purpose anymore. (Thanks to @cpkelley94)
Q: Dahell, I can't use Google Now.
A: I found that all you have to do to fix Google now is get root explorer, titanium backup or SD maid, remove system app Google search and reinstall from play store... (Thanks to @turtlepa)
Q: My battery drains so fast and I found out that WiFi kept awake and running in background even I disabled it. Why?
A: Due to new Android version permission, Google set up a new option to allow Gapps to scan for nearby networks even when WiFi is off. To disable that, go to settings>WiFi>advance>untick the scanning always available option n u r cool again .
Q: Is this really KITKAT? And can I eat it?
A: Yes, yes it is. And u r advised to cook it before eating tho. Enjoy your meal then .
More that has been answered here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer: We are not responsible for any damages on your device.
Original Slim Features:
The Real Dark Slim
Notification drawer Shortcuts
Full hardware key rebinding!
Keyboard rotation
SlimCenter
Check out our full feature list here
Important Notes:
NO ETA's...
Fully compiled from AOSP source ( source.android.com) with our mods.
Read the Change-log and installation instructions from the official website carefully.
Feature requests will be ignored in general, but we will review ( if a relevant commit or source is provided) and then decide.
Please provide a logcat if reporting a bug.
Strictly NO ports based on our ROM zip (official or unofficial build) file, manifest.xml will be updated regularly and feel free to compile from source.
No discussions/screenshots etc in the thread about battery life, "best settings/gov/scheduler" for "best battery life" etc... see here for the reasons why...
Changelog
Find our latest Changelog go here
Chat with the slim team and other slim users
IRC: #slimusers@freenode
New to IRC? Don't have a native app? Try the Freenode web client [link] or the Firefox extension Chatzilla [link]
Google+ [link]
Twitter [link]
Facebook [Link]
Installation instructions
For Most Users
Please keep in mind if a special instruction is needed it will be noted in the Changelog
Download the latest build from here or via slim center - for further update.
Check the MD5 on Goo.im before flashing.
For Gapps Installation if you don't have it already): download Official Slim Addons from [here] or via Slim center.
!Recommended! One click heimdall a BML kernel/ROM then flash kitkat, then do a full wipe, and manual format /system.
Flash Slimkat ROM again and the addons you want, reboot - Make sure you are on at least CWM 5.x.x or TWRP.
FAQ
Check out out FAQ before posting! Keeps more common questions answered in one place!
Help us out!
If you want to help us by translating slim to your language check out Crowdin.net and submite your translations.
Or consider a donation.
Thanks!
You can find the full list of credits here
Source
Please visit here for the rom source code
Known Issues (According to Official issues of Slim bean on galaxysmtd):
Aries Common Bugs.
Slim Common Bugs - check at slim rom website.
Other than that, you tell me .
Galaxy S 4G exclusive Features:
Disabling Softkeys in advance Settings.
3.0.101 latest NiLTMT kernel v13.11.20
OTA Update from me - Need someone to confirm?
More Credits!
- Thanks to Erik for JellyBean Sake. And noiphonehere for talking over nights with me ---SORRY bro.
- Thanks to Team Acid plus JT1134 for ICS and Aries Goodness...
- Thanks to my new Badass Teamates (especially Thomas.Raines and Erik, Ray, and Cooptx haha)...
- Thanks to Cyanogen and pawitp for the Fixes
- Thanks to @DJLamontagneIII for a good kernel base
- And Special Thanks to XDA's Devs and members
Okay, The first Kitkat build is up. Go to my Goo.im, download and enjoy everyone! I need you to test the Slimcenter OTA updater for the next update also . Stay tuned!
Remember to follow the OPs tho, especially the first one about FAQ. You have to carefully follow the procedure to flash this ROM: Heimdall oneclick back to BML and then flash it. Remember to do a full wipe!
One more: for stability, OC and UV are not recommended. I might revert those 2 features in the next build.
thank you. just thank you. (tries not to cry)( old phone has more life left)
Based on latest slim kat ?
Thank You man !! i am going to with in one hr.
and i will let you my feedback
sir can i use gremlin remover?
it its similar to oneclick? but it contains roots and kernels??
cause im to lazy to download onelick PEACE
DerPuGNa said:
sir can i use gremlin remover?
it its similar to oneclick? but it contains roots and kernels??
cause im to lazy to download onelick PEACE
Click to expand...
Click to collapse
Ye, u can
Sent from my GT-N7000 using Tapatalk 2
- Installed Heilmdall one click(Kernel) over Jelly Bean !!
- installed "Slimkat-galaxys4gmtd-4.4.2-20131228"
now phone stock on niltmt (Kernel Boot Logo)
i am waiting for 10 minute nothing but just boot logo appearing
what to do now ?
ithunter said:
- Installed Heilmdall one click(Kernel) over Jelly Bean !!
- installed "Slimkat-galaxys4gmtd-4.4.2-20131228"
now phone stock on niltmt (Kernel Boot Logo)
i am waiting for 10 minute nothing but just boot logo appearing
what to do now ?
Click to expand...
Click to collapse
Hmm weird, lets me check the build again, or I might upload my previous build insted (w/o ota support). Interesting that the only change in this build compare to previous one running on mine is OTA suport and it was cleaner build (on mine was dirty one).
Oh wait, did u flash the build again via TWRP? If not, I am sorry that I forgot telling ya that once u r in TWRP, u have to flash it again (u know how to use TWRP rite?)
Anw, u can still heimdall again n flash slimbean tho so dunt worry
Sent from my GT-N7000 using Tapatalk 2
daothanhduy1996 said:
Hmm weird, lets me check the build again, or I might upload my previous build insted (w/o ota support)
Anw, u can still heimdall again n flash slimbean tho so dunt worry
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
trying again and again
nothing just kernel boot logo
ithunter said:
trying again and again
nothing just kernel boot logo
Click to expand...
Click to collapse
Did u flash the ROM again in TWRP? I mean:
1. Copy the ROM to sdcard then Heimdall BML kernel
2. Full wipe except sdcard and flash Slimkat build
3. After booted into TWRP, full wipe and flash the build again.
4. Reboot.
daothanhduy1996 said:
Did u flash the ROM again in TWRP? I mean:
1. Copy the ROM to sdcard then Heimdall BML kernel
2. Full wipe except sdcard and flash Slimkat build
3. After booted into TWRP, full wipe and flash the build again.
4. Reboot.
Click to expand...
Click to collapse
not boot in to TWRP !!
now i am back to fresh 2.3.6
ithunter said:
not boot in to TWRP !!
now i am back to fresh 2.3.6
Click to expand...
Click to collapse
Use the Combo volume + volume - and power button to boot into Recovery tho. If u wiped b4 heimdall then after flashing slimkat, it should bring u into TWRP. that was weird unless u hadn't wiped :/.
now again:
- installed fresh 2.3.6.
- installed AntonX-Basic_with_a_twist-v1.1.0-OC_UV
- wait 5~ minute on boot logo !!
- boot on cwm and install your rom
- auto reboot into TWRP
- install rom again
- wipe
- Reboot
- Phone boot into KitKat
Thank You !!!
jeez! no dao!
its working for me!
i just cant take screen shot! but it works promise DDDDD
THANKS! DDDDDDDDDDD
ithunter said:
now again:
- installed fresh 2.3.6.
- installed AntonX-Basic_with_a_twist-v1.1.0-OC_UV
- wait 5~ minute on boot logo !!
- boot on cwm and install your rom
- auto reboot into TWRP
- install rom again
- wipe
- Reboot
- Phone boot into KitKat
Thank You !!!
Click to expand...
Click to collapse
I added the right procedure onto OP anyway so everyone else should follow it easier. And FYI, u should have OTA updater works from now on for updating the ROM in future. U should receive a notification automatically everytime I upload a new build then. One more thing I have to do is finding a way to include Changelog and mayb look over GPS then .
DerPuGNa said:
jeez! no dao!
its working for me!
i just cant take screen shot! but it works promise DDDDD
THANKS! DDDDDDDDDDD
Click to expand...
Click to collapse
I can take screenshots hehe teeheee but no way I'm gonna upload them since my MOM got the phone back
P/s: I will make it weekly as long as the upload speed isn't affected by that stupid issue of my country's internet tho.
Good Luck to you and Good Luck for us too !!
Thank You !!
Bug:-
- lack of some useful cm Features (everyone know that)
- reboot after wallpaper set (once)
- lack of native advance overvlock/underclock options.
- phone connected on USB debugging even after disable from devs options
btw now i am confirm we will have perfect stable Kitkat )
ithunter said:
Good Luck to you and Good Luck for us too !!
Thank You !!
Bug:-
- lack of some useful cm Features (everyone know that)
- reboot after wallpaper set (once)
- lack of native advance overvlock/underclock options.
- phone connected on USB debugging even after disable from devs options
btw now i am confirm we will have perfect stable Kitkat )
Click to expand...
Click to collapse
I'm gonna exclude the OC and UV from the next update anw. It causes more trouble to the stability than it helps on the battery tho. Plus, it's good to let the phone rest for a while, 15 to 30 seconds after every boot finishes to ensure that u won't have freeze/reboot afterwards. and ye. Slimkat just hit the Beta phrase yet, features are slowly merged tho so stay tuned for OTA gift .
Thank you so much for is dao!
OTA works great. Is ART functioning? My SELinux status says Enforcing. Is that a problem?
Sent from inside the time vortex
GalaxyTab3_Toolkit v1.1
For use with the Samsung Galaxy Tab 3 8" WiFi - SM-T310 Model
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is an all-in-one tool, used to assist with rooting/custom recovery/stock rom/custom rom/bricks
I've made this because, there isn't a tool specifically for the 8" sm-t310 available, and I figured everybody could benefit from it somehow.
- Instantly and directly download the following:
--- GalaTab3 Kernel v14.1.6 (thanks to @arshull )
--- CWM Recovery v6.x r#4 (thanks to @emwno )
--- TWRP Recovery v2.5.0.0 r#3 (thanks to @emwno )
--- TWRP Recovery 2.6.3.0 (thanks to @gr8nole )
--- Philz Advanced CWM v6.12.8 (thanks to @Phil3759 )
--- Odin v.3.09
- Flash recovery, stock firmware image
- Read system information
- Run Odin within this app to flash recovery/firmware
- View live logcat
- Supports JDQ39 firmware 4.2.2 (does not currently work with 4.3/4.4!!)
- Perfect for noobs and advanced users
Download
http://www.f0il.com/android/GalaxyTab3_Toolkit_v1.1.zip - v1.1
Special thanks to:
@arshull - for his GalaTab3 Kernel work
@emwno - for his CWM & TWRP Recovery work
@regaw_leinad - for his AndroidLib project
@autoprime - for being a cool ass dude
@gr8nole - for his work on CWM recovery and Cyanogenmod port
@Phil3759 - for his awesome advanced CWM port
Changelog -
02/02/2014 - v1.1
(*) Fixed Reboot Download issue requiring root, will now reboot regardless
(*) Reworked GUI to be quite a bit more friendly
(*) Fixed a few connection related bugs
(+) Added option to make program always on top of other forms on/off
(+) Added options to download more recoveries
01/22/2014 - v1.0
(*) Fixed bug in GalaTab3 Kernel Download
(*) Changed GUI slightly, added section for "links" instead of including them under "tools"
(+) Added link to this support thread
01/20/2014 - v0.1a
First initial release
@emwno I tried to contact you in your twrp thread, but never got a response. If you want me to remove cwm & twrp from this program, or my server, please let me know and I will do so!
Sent from my iPhone using Tapatalk
Fantastic! Downloading..
Ok DEV i may need a spoon-full. Fired up the tool and scanned, it worked perfect, tab information showed-up and all buttons lit-up. Didn't try any recovery options cause i'm already rooted but i had been meaning to install galatab3. Clicking on "Get GT3 Kernel" didn't do anything and neither did clicking on "Gala Tab 3" (tools section) took me to the discussion thread but nothing else. Neither option downloaded the file, so is it something I'm doing wrong?
Downloading odin worked like a charm, i didn't try TWRP or CWM since I'm already rooted.
Reboot recovery and reboot system work. i haven't had a need to try any other functions (yet). Oh, one thing i found inconvenient is the tool is always-on-top.
I do believe if you intend for it to a tool for noobs, you do a separate tool for rooting and recovery only, sort of like a one or two click rooting with only one or buttons to click. As it is right now, there are too many options. And also you can really get in that noob mode and it would dawn on you to put in the instruction how to make the developer options show up in the first place LOL Just IMO DEV.
Thank you for all of your feedback @treetop777
When you click "Get GT3 Kernel," it should download the GalaTab3 Kernel right into the same directory as the program itself.
Once it downloads, if you then click the "Copy GT3," it will then copy the Kernel over to /sdcard/ path of the device. From there, you can reboot into recovery and install the zip file of GalaTab3 from the sdcard.
Please try that and let me know how it works for you. I will try to categorize everything better and lay it out easier with your feedback. Thank you
Sent from my iPhone using Tapatalk
foil said:
Thank you for all of your feedback @treetop777
When you click "Get GT3 Kernel," it should download the GalaTab3 Kernel right into the same directory as the program itself.
Once it downloads, if you then click the "Copy GT3," it will then copy the Kernel over to /sdcard/ path of the device. From there, you can reboot into recovery and install the zip file of GalaTab3 from the sdcard.
Please try that and let me know how it works for you. I will try to categorize everything better and lay it out easier with your feedback. Thank you
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
NP DEV. Will you put out an update? Cause for sure the version i have DO NOT download the Kernel and also, i don't see the "Copy GT3" you mentioned.
You know, now that i think of it, when i hover over the "Get GT3 Kernel" i get a message about the SD card. Maybe you meant that button to read "COPY GT3 Kernel" ?? If that's the case, then it would have to be moved to the tools section.
But first DEV, it has to download the Kernel which it's not doing right now. Unless I'm doing something wrong.
I'm sorry about the issue that you're having.. I am going to look into it in just a few minutes. I will release an update tonight for you.
Sent from my iPhone using Tapatalk
treetop777 said:
NP DEV. Will you put out an update? Cause for sure the version i have DO NOT download the Kernel and also, i don't see the "Copy GT3" you mentioned.
You know, now that i think of it, when i hover over the "Get GT3 Kernel" i get a message about the SD card. Maybe you meant that button to read "COPY GT3 Kernel" ?? If that's the case, then it would have to be moved to the tools section.
But first DEV, it has to download the Kernel which it's not doing right now. Unless I'm doing something wrong.
Click to expand...
Click to collapse
I have uploaded version 1.0 now, and have fixed the bug in the Kernel download method that I was using.
Please try the new version, and let me know if that fixes your problem(s)!
Once you click "Get GT3 Kernel," it will download the kernel zip, and place it into the current directory of the GalaxyTab3_Toolkit, then the button will rename itself to "Copy Kernel." Click that, and it will ask you if you'd like to transfer the kernel zip over to /sdcard/ on the tablet. Click yes, then once it finishes, click Reboot Recovery, and you will be able to install the kernel zip file from there.
Worked EXACTLY as expected! Downloaded GT3 then pushed it to the internal storage then rebooted into TWRP. After flashing GT3, rebooted into system and the tab is running smooth. No glitches, no problems. What more can i say - flawless!
It's nice to have all these procedures all in one place.
Thanks!
treetop777 said:
Worked EXACTLY as expected! Downloaded GT3 then pushed it to the internal storage then rebooted into TWRP. After flashing GT3, rebooted into system and the tab is running smooth. No glitches, no problems. What more can i say - flawless!
It's nice to have all these procedures all in one place.
Thanks!
Click to expand...
Click to collapse
Great! I am going to work on making everything a bit easier for everyone to understand, thanks to your input!
I'm glad everything worked for you
Sent from my SM-T310 using Tapatalk
Looks awesome going to give it a shot, lets see if this meets my needs.
Using it now but why no philz recovery?
Update....
Worked great thanks.
One small issue was having to put the device into download mode manually. I was getting an exception error about no root when I chose the reboot download button.
Once philz was installed, I used his root option and then installed supersu and Staricson busybox using smart install. Device is now rooted and I can start modding.
Thanks !
Small recomendation.. allow for the app to use or not use system proxy. Also, app should have an option to not always be on top.
CodeJACK said:
Using it now but why no philz recovery?
Update....
Worked great thanks.
One small issue was having to put the device into download mode manually. I was getting an exception error about no root when I chose the reboot download button.
Once philz was installed, I used his root option and then installed supersu and Staricson busybox using smart install. Device is now rooted and I can start modding.
Thanks !
Small recomendation.. allow for the app to use or not use system proxy. Also, app should have an option to not always be on top.
Click to expand...
Click to collapse
Well, I haven't had the chance to test Philz recovery out just yet, I only included the tools that I have personally tested.
I am going to add an option for all of the updated recoveries that support CM10-CM11! Also, I will add an option to allow it to not always be on-top, too!
I will look into the root-required Download Mode reboot, but it would always fail to reboot into Download Mode for me if I didn't run it as SU.. I'll see what I can do to fix it, because I know that it doesn't require root through a regular shell.
Thank you for your feedback!!
Sent from my SM-T310 using Tapatalk
duh... i was working on a toolkit :cyclops::cyclops: but anyways this looks awesome :fingers-crossed:
Nice all in one root package. Thanks a lot...
Sent from my SM-T310 using XDA Premium 4 mobile app
Does this toolkit also works with T311 (Tab3 8.0 3G)?
Gesendet von meinem SM-T311 mit Tapatalk 2
OllerLoewe said:
Does this toolkit also works with T311 (Tab3 8.0 3G)?
Gesendet von meinem SM-T311 mit Tapatalk 2
Click to expand...
Click to collapse
I don't have a T311 to test with, but once I get everything implemented that I want for the T310, I will try to add functions for the T311 for you!
Any love for the t315 4g version?
I've updated to version 1.1 guys, please check the changelog in the original post for more information!
@gx3k - no, I'm sorry, no support for T311 or T315 yet! I think everything is now good with the T310, so I will start working on the other two now!
@Phil3759 & @gr8nole - I added your recoveries to my project, and have hosted them on my server as well for a direct-download method. If this is a problem at all, please let me know and I will remove them asap! Thank you guys for all of your work
Superb!
Echoing what others have said, nice to see everything in one place, had my Tab rooted within ten minutes, thanks for the tool!
Galaxy Note 5 PC3 Marshmallow Stock Deodexed Rom
This build is based on the stock PC3 6.0.1 Marshmallow build.
This is a first release. Even though it has been tested, please report any issues.
You MUST be running a Marshmallow bootloader to run this rom!
The FULL odin firmware must be flashed at least once to prep the phone. It is available here -- > Marshmallow 6.0 Odin files N920PVPU2BPC3
Features:
- Rooted
- Busybox
- Hotspot enabled
- Knox Removed
- ItsOn Removed
- 5 way reboot
- Signature verification removed
- Netflix & screen mirroring fixes
- All apps updated to current versions
Download Link ---> N920P_PC3.6.0.1.De-Odexed.Ver1.1.zip
MD5 Checksum: 324eb4f81999acb0d39ad68f3ed4abb2
Rom Installation
Preparing the stock rom
• In the stock rom, turn on developer mode, enable USB debugging and OEM Unlock
- Settings>>>about device>>> scroll to bottom and tap build number 8 times
now press back button once and tap developer options...
- Toggle on both USB debugging and OEM Unlock.
• Copy the downloaded rom.zip file to internal storage
Install Custom Recovery with Odin
• Download Odin & custom recovery tar
Odin3_v3.10.6.zip
twrp-3.0.2-0-M-nobleltespr.tar.tar
• Extract Odin zip-file
• Power down the phone
• Open Odin on pc
• Boot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
• Connect phone and wait until you get a blue sign in Odin
• Add the recovery file to AP / PDA (depending on version of Odin)
• Make sure re-partition & Auto Reboot are NOT ticked
• Click the start button and let the Odin flash complete
• Unplug & Reboot phone directly into Recovery Mode
(press and hold Power + Volume Down buttons and as soon as the phone reboots hold Home + Power + Volume Up buttons )
• BACKUP YOUR CURRENT SETUP WITH TWRP
• Do a FULL wipe but do not reboot yet
A full wipe includes:
Dalvik Cache
System
Data
Cache
• Flash rom and reboot.
Code:
[B]Changelog:[/B]
[B]Version 1.1[/B]
- permission fixes tnx to [user=3699616]@mwilky[/user]
- SuperSU Beta updated to v2.71
- OTG storage fixed
- Gear VR fixed
- Fixed something else, I just don't remember what it was ;)
[B]Version 1.0[/B]
- initial release
Android M Debloat tool
Attached at the bottom of this post.
HIGHLY recommended to remove all the unnecessary bloat.
Flash right after rom install (before rebooting) for best results.
Credits:
@mwilky for permission fixes to get things running the way its supposed to
@SuperR. for the rom kitchen and his ongoing support
Note 5 Recoveries
Note 5 Kernels
Sprint Galaxy Note 5 Modems
** Modems are flashed in Odin. The tar file gets placed in the CP slot.
================================================
Mini-Bootloaders
These will allow you to flash between 5.1.1 and 6.0x with ease.
Important note:
- You MUST flash the full marshmallow tarball at least once to prepare the phone.
- You MUST match the Bootloader version to your backup, they are not interchangeable. The OK3 firmware will run older versions of 5.1.1 too.
Mini Bootloaders Link
OK3 = 5.1.1
PA2 & PC3 = 6.0.1
Use of Mini Bootloaders:
- These do not include the OS and REQUIRE that you have a matching OS backup already saved to restore
- Flash the bootloader with Odin (same instructions apply as rom flash in Post #1). Make sure you uncheck the auto reboot choice first.
Once the flash is complete unplug the phone, press and hold pwr + volume/down to reboot and as soon as the phone resets, immediately press pwr + home + volume/up to enter custom recovery and restore your backup.
** If you missed the key sequence try again, it takes good timing but I'm sure you'll be a pro at it in no time.
Just for Fun
ZTE 'DiscoBall' Lockscreen
- two finger hold on disco ball brings up extended shortcut menu
- works ONLY on swype type lockscreen
- does not have onscreen notifications, its just a cool little app
- little bug, pressing home button takes you right to the desktop so be aware if you carry this in your pocket, it may unlock on its own
SElinux permissive or enforced?
primaleph said:
SElinux permissive or enforced?
Click to expand...
Click to collapse
Stock kernel.
So we have to be on mm to flash this? This might be a dumb question, is there anyway of being on 5.1.1 to flash this?
Tdunham always got our hack thanks bro
Sent from my SM-N920P using XDA Premium HD app
Debloat tool updated v1.1 to deal with some of those nasty Sprint apps that get installed to the data partition if you forget to flash it before the first boot.
Known issue - some of the Sprint bloat will popup with some errors that they cannot install. Not really interested in getting all the downloaded bloat working at the moment, just thought I would point it out to prevent some questions.
tdunham said:
Debloat tool updated v1.1 to deal with some of those nasty Sprint apps that get installed to the data partition if you forget to flash it before the first boot.
Known issue - some of the Sprint bloat will popup with some errors that they cannot install. Not really interested in getting all the downloaded bloat working at the moment, just thought I would point it out to prevent some questions.
Click to expand...
Click to collapse
To fix this, remove Sprint ID. Freezing it or hiding it with Debloater may not be enough.
Is there a kernel for this rom?
tdunham said:
Galaxy Note 5 PC3 Marshmallow Stock Deodexed Rom
This build is based on the stock PC3 6.0.1 Marshmallow build.
This is a first release. Even though it has been tested, please report any issues.
You MUST be running a Marshmallow bootloader to run this rom!
Features:
- Rooted
- Busybox
- Hotspot enabled
- Knox Removed
- ItsOn Removed
- 5 way reboot
- Signature verification removed
- Netflix & screen mirroring fixes
- All apps updated to current versions
Download Link ---> N920P_PC3.6.0.1.De-Odexed.Ver1.0.zip
Rom Installation
Preparing the stock rom
• In the stock rom, turn on developer mode, enable USB debugging and OEM Unlock
- Settings>>>about device>>> scroll to bottom and tap build number 8 times
now press back button once and tap developer options...
- Toggle on both USB debugging and OEM Unlock.
• Copy the downloaded rom.zip file to internal storage
Install Custom Recovery with Odin
• Download Odin & custom recovery tar
Odin3_v3.10.6.zip
twrp-3.0.0-3-M-nobleltespr.tar.tar
• Extract Odin zip-file
• Power down the phone
• Open Odin on pc
• Boot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
• Connect phone and wait until you get a blue sign in Odin
• Add the recovery file to AP / PDA (depending on version of Odin)
• Make sure re-partition & Auto Reboot are NOT ticked
• Click the start button and let the Odin flash complete
• Unplug & Reboot phone directly into Recovery Mode (press and hold Home + Power + Volume Up buttons)
• BACKUP YOUR CURRENT SETUP WITH TWRP
• Do a FULL wipe but do not reboot yet
A full wipe includes:
Dalvik Cache
System
Data
Cache
• Flash rom and reboot.
Android M Debloat tool
Attached at the bottom of this post.
HIGHLY recommended to remove all the unnecessary bloat.
Flash right after rom install (before rebooting) for best results.
Click to expand...
Click to collapse
Freaking cool dude..
It says my USB storage is corrupt. But I put in my S6 and it works fine. I even formatted it and it still says corrupt. If you could upload a patch to fix that'd be sweet. That's the only issue I've come across. Thanks for the ROM.
---------- Post added at 06:54 AM ---------- Previous post was at 06:46 AM ----------
I even went into TWRP and it let me mount USB storage and select from it. So gotta be something in ROM that keeps saying it's corrupt. Thanks again.
The hotspot hack you have on this rom, do you use The HiddenMenu.apk from the OK3 Rom?
Androidwarrior said:
The hotspot hack you have on this rom, do you use The HiddenMenu.apk from the OK3 Rom?
Click to expand...
Click to collapse
No, patched in services.
Bobthahog said:
It says my USB storage is corrupt. But I put in my S6 and it works fine. I even formatted it and it still says corrupt. If you could upload a patch to fix that'd be sweet. That's the only issue I've come across. Thanks for the ROM.
---------- Post added at 06:54 AM ---------- Previous post was at 06:46 AM ----------
I even went into TWRP and it let me mount USB storage and select from it. So gotta be something in ROM that keeps saying it's corrupt. Thanks again.
Click to expand...
Click to collapse
I'm hearing about this on other versions of MM as well. Someone suggested that they formatted the SD on the phone and its working fine again.
As far as I know, its not doing it on stock but this version is so new that I cant verify if it has something to do with marshmallow being deodexed or what the issue is with that. We'll have to keep an eye on it. I have a few smaller SD cards, maybe I'll start swapping them around to see if I can duplicate it. We need more information and input from other people. :good:
tdunham said:
No, patched in services.
Click to expand...
Click to collapse
If the prl or profile gets updated will it break the hotspot hack?
Androidwarrior said:
If the prl or profile gets updated will it break the hotspot hack?
Click to expand...
Click to collapse
Dude, you've run a bunch of my stuff, has that EVER broken hotspot?
For everyone else, the real answer is no.
Quick question. Does the MM debloat tool effect GearVR?
For those with internal storage issues, open up a terminal & try
su
restorecon -FR /data/media/0
Not sure if will work but it would on my Nexus 5 when I encountered that issue.
Can this be used as a daily
I just stumbled onto this thread. Is the ROM buggy? I can't tell from the comments
Flashed this morning and running great. Good work Dunham. Question, what was the ad block app you used on MOAR rom?
CUSTOM ROM FOR MICROMAX Q402 PLUS
Hey guys today i am presenting you to custom ROM for Micromax q402+ (cg sky)
This ROM is Specially made for Micromax Bharat 2 device, which is distributed by chhattisgarh govt to people of cg. and came with an subcidy lock app.Due to this app no consumer can unlock his/her device without jio4G Network. But work for same model no too.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
Click to expand...
Click to collapse
Cautions
*Read the ROM installation instructions correctly
*Press the 'Thank you' button instead of saying it will keep me motivated to do more
Feature of this Rom
No Restriction to use Jio Network to unlock phone (no subcidy lock) But you need jio sim. (Due to Nvitem subcidy Locked)
No Restriction of working internet on only jio sim(net working in both sim)
Deodex rom
Deobloted
zip Aligned
Requirment
unlock your bootloader first -
install adb and fastboot tool in pc ,you can download here " https://forum.xda-developers.com/showthread.php?t=2588979 "
put your device in fastboot mod- power off device then press and hold power button + volume up key for some time.
when your device is in fastboot mod go to c:\adb folder(adb tool are installed here)and press shift +right click and choose open command window here.
in cmd put this command to check device is in fastboot mod and unlock it
Code:
fastboot devices
fastboot flashing unlock
fastboot reboot
Flashing Recovery IMG
TWRP Recovery https://mega.nz/#!DlYlTaiC!38AOJurHS...JAaFtDjjZHUKCI
CTR/CWM RECOVERY https://mega.nz/#!j9oC0AJK!BInozliM_...WVfSAjdc1sm7lQ
To flash recovery put device in fastboot mode then connect to pc, remember to recovery img extracted from above zip to c:\adb folder for easy
Then type this commands
Code:
fastboot flash recovery recovery.img
fastboot reboot
here you have to put name of img file whatever its named
fastboot reboot to exit fastboot
Installation Steps
download rom from below link and place it in your sdcard or external sd card. boot in recovery mode- power off device then press and hold power button+volume down key and then go got advance option
wipe dalvik cache
wipe cache
wipe data
wipe system
Then install rom zip and reboot
ROM LINK - https://drive.google.com/file/d/1-0lx3WNFtC919Su8yUGmtW375z6nuRm5/view?usp=drivesdk
NOTE- If internal storage is not working then go to twrp and then -wipe-format data-yes(type) reboot
Special thanks to
topjohnwu for magisk
superR's for his kitchen
osm0sis for his tool AIK
Version 1.1 is out there
changelogs-
* Deodexed ROM (no more fc)
* Heavily Deblpted (light weight <600mb)
* Zipaligned
* Added some apps
* Prerooted (With magisk, you can change to superSU )
* Screen shot added
Note - First boot can take aproox 5-10 minuts so keep patience.
format data after flashing rom.
after setting up ,if internal storage not showing then format data again
Ver 1.2 is successfully ported and booted.
This rom is a port rom of evercross m50 star stock rom with theme support.
Screen shots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
camera
V1.2 is almost ready but need some minor bug fix .I will upload it soon only if any one interested.
Edit- 1.2 is ready but i have no bandwidth right now. I will recharge soon and upload it
UPDATE - found this new bugs
* camera focus problem
* autorotation
*VoLTE not locking to indian band (but 4G Works)
trying to fix those bugs
Update-
camera bug fixed
Autorotation (semi work)
Volte (patched some files ,need a tester)
Apps fc fixed
Full deodexed
UPDATE link - succesfully tested - check here
https://forum.xda-developers.com/android/development/custom-rom-sc9832a-devices-mmx-q402-t3920321
Volte not Working Sir
I flashed Rom v1.2 M50 Star on my 402+ Sky Mobile distributed by CG Govt. Everything is working fine as of now instead of VoLTE.
Network is showing. Internet also working. But VoLTE is missing.
Settings like enhanced volte mode are correctly set and there is no effect when changing preferred network to 3g/2g. Jio receives 4G signal every time.
In Testing menu, Preferred network type is set to unknown and volte provisioned is enabled. Changing both these settings don't have any effect and they revert to default automatically after exit.
Calling is working by using Jiocall App but i hate using an app for calling when phone is Volte enabled out of the box. Please suggest any solution or patch the Rom for volte issue.
By the way, thanks for this Wonderful ROM.
shankar1790 said:
V1.2 is almost ready but need some minor bug fix .I will upload it soon only if any one interested.
Edit- 1.2 is ready but i have no bandwidth right now. I will recharge soon and upload it
UPDATE - found this new bugs
* camera focus problem
* autorotation
*VoLTE not locking to indian band (but 4G Works)
trying to fix those bugs
Update-
camera bug fixed
Autorotation (semi work)
Volte (patched some files ,need a tester)
Apps fc fixed
Full deodexed
UPDATE link - succesfully tested - check here
https://forum.xda-developers.com/android/development/custom-rom-sc9832a-devices-mmx-q402-t3920321
Click to expand...
Click to collapse
izhark5 said:
I flashed Rom v1.2 M50 Star on my 402+ Sky Mobile distributed by CG Govt. Everything is working fine as of now instead of VoLTE.
Network is showing. Internet also working. But VoLTE is missing.
Settings like enhanced volte mode are correctly set and there is no effect when changing preferred network to 3g/2g. Jio receives 4G signal every time.
In Testing menu, Preferred network type is set to unknown and volte provisioned is enabled. Changing both these settings don't have any effect and they revert to default automatically after exit.
Calling is working by using Jiocall App but i hate using an app for calling when phone is Volte enabled out of the box. Please suggest any solution or patch the Rom for volte issue.
By the way, thanks for this Wonderful ROM.
Click to expand...
Click to collapse
you can use 360os rom instead of this for volte feature https://forum.xda-developers.com/android/development/360-os-rom-micromax-bharat-2-cg-sky-t3936724 (only video call bug but whatsapp video call working)
or infocus A2 rom
https://forum.xda-developers.com/android/development/custom-rom-micromax-q402-plus-sc9832a-t3921004 (only auto rotation bug)
i will look for volte bug on this rom but for now you can use above roms( preferably 360 OS ROM)
I'll try your suggested ROMS. Thank you Sir.
I'll try both of these ROMS. You are really working very hard for us. Thank you so much.:good:
shankar1790 said:
you can use 360os rom instead of this for volte feature https://forum.xda-developers.com/android/development/360-os-rom-micromax-bharat-2-cg-sky-t3936724 (only video call bug but whatsapp video call working)
or infocus A2 rom
https://forum.xda-developers.com/android/development/custom-rom-micromax-q402-plus-sc9832a-t3921004 (only auto rotation bug)
i will look for volte bug on this rom but for now you can use above roms( preferably 360 OS ROM)
Click to expand...
Click to collapse
I followed the instructions but when I boot back into the recovery mode, I am stuck at the `Swipe to unlock` TWRP screen. I cannot do anything. The screen is not responsive. Pressing volume or power button locks the screen and I have to reboot the phone again. Or can you please provide me the stock recovery?
RajaRaviVarma said:
I followed the instructions but when I boot back into the recovery mode, I am stuck at the `Swipe to unlock` TWRP screen. I cannot do anything. The screen is not responsive. Pressing volume or power button locks the screen and I have to reboot the phone again. Or can you please provide me the stock recovery?
Click to expand...
Click to collapse
have you replaced your touch panel recently?.
your kernel disabled touch in twrp recovery but you can use cwm recovery
link https://mega.nz/#!j9oC0AJK!BInozliM_2Uiy4rT2A9RLcoLo5-l9WVfSAjdc1sm7lQ
flash this recovery. put rom.zip file in external sd card . wipe system, data ,cache and dalvik then enjoy the rom.
sorry for late reply
shankar1790 said:
have you replaced your touch panel recently?.
your kernel disabled touch in twrp recovery but you can use cwm recovery
link https://mega.nz/#!j9oC0AJK!BInozliM_2Uiy4rT2A9RLcoLo5-l9WVfSAjdc1sm7lQ
flash this recovery. put rom.zip file in external sd card . wipe system, data ,cache and dalvik then enjoy the rom.
sorry for late reply
Click to expand...
Click to collapse
Hi thanks for the reply. No the phone is pretty new and the touch panel was not touched. I don't have the phone with me right now. I will try it when I get my hands on the phone.
How to root please help ?
I need help with your please help me
How to root this device
Deepak041 said:
I need help with your please help me
How to root this device
Click to expand...
Click to collapse
sorry to tell you bro but there is no successful method to root android 7.0 without pc .OR you can simply Go to mobile store/technician near you and ask him for flashing twrp recovery only or you can borrow someone pc (friends).
you dont have to do much just follow this steps here or if you need i will make an video tutorial for you
https://forum.xda-developers.com/an...p-mmx-q402-t3918122/post79263991#post79263991
wish you good luck.
Sir please make rom for micromax bharat 4 cgsky..
Sir please make rom for micromax bharat 4 cgsky..
Govindkhunte said:
Sir please make rom for micromax bharat 4 cgsky..
Click to expand...
Click to collapse
Ok .. but i dont have this device so i will make test builds. You might be face some bugs but i will try my level best. Is someone near you ,want to sell his device (micromax q440 ) bharat 4. I m interested to buy(for rom port)
There is many roms for your device that i can port. You definetly love to flash and use as daily driver. Only problem is that i dont hav this device for bug fixing. But dont worry i will make for you
bro i am stuck in the fastboot mode, my laptop is not recognizing the device, please help me out
Dark Lord 11 said:
bro i am stuck in the fastboot mode, my laptop is not recognizing the device, please help me out
Click to expand...
Click to collapse
what is your current os Linux or Window ?
if Windows then which version ? 32bit or 64bit
first of all, uninstall all adb and spdtreatrum driver from your current windows from control panel (program and feature) or use usb deview (portable version) depend upon your current os type 32/64bit.
run as administrator (and select and unistall).
if your current os is win 10/8/8.1 or 7 then yo have to reboot in test mode (search google for how to boot win 10 in test mode)
means you have to disable driver signature enforcment.
then install 15 sec adb & fastboot installer - https://forum.xda-developers.com/attachment.php?attachmentid=4623157&d=1540039037
from this post https://forum.xda-developers.com/showthread.php?t=2588979
then reboot again in test mode. this time it will recognize your device in fastboot mod
Questions/Problems regarding Q Mobile Custom ROM
Sir, a great thanks for the ROM.
I have few questions about the ROM:
1. The network is restarting frequently after every few minutes. How to fix this? This problem is not faced in Stock ROM. Link for screen recorded video : https://youtu.be/by85zLwpnNQ
2. My mobile has got infected with two Malwares, "xhelper" and "fireway". Do you have any idea on how to remove them and prevent them from coming again. When i uninstall both, they install themselves again. Don't know which app is the real culprit behind them.
3. There is a system update. Is that for Custom ROM or the phone of which this ROM originally is?
Image of update : https://ibb.co/mC4NzYH
izhark5 said:
Sir, a great thanks for the ROM.
I have few questions about the ROM:
1. The network is restarting frequently after every few minutes. How to fix this? This problem is not faced in Stock ROM. Link for screen recorded video : https://youtu.be/by85zLwpnNQ
2. My mobile has got infected with two Malwares, "xhelper" and "fireway". Do you have any idea on how to remove them and prevent them from coming again. When i uninstall both, they install themselves again. Don't know which app is the real culprit behind them.
3. There is a system update. Is that for Custom ROM or the phone of which this ROM originally is?
Image of update : https://ibb.co/mC4NzYH
Click to expand...
Click to collapse
i had removed my 360os Rom link from thread because of that virus. please switch your current rom to other.
do a clean install ,wipe everthing system,data,internal sd, cache even your extcard for safety.
switch your current rom to IDOS or Infocus Rom. The rom ported from qmobile is infected with virus(from manufacturer).
Sir what about my 1st and 3rd query
Fire _Phoenix said:
switch your current rom to IDOS or Infocus Rom. The rom ported from qmobile is infected with virus(from manufacturer).
Click to expand...
Click to collapse
Sir what about my 1st and 3rd query.
izhark5 said:
Sir what about my 1st and 3rd query.
Click to expand...
Click to collapse
for 1st -delete all apn settings and create new one manually.
3rd . if you try to download that update it will never install in current os due to system modified. rooted and twrp recovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Latest Version v3.3 [15/05/2023]
ROM Maintainer: Andrei @starbucks2010
ROM Info:
Supported devices: [SM-S908B] [SM-S906B] [S901B]
ROM Base: S90xBXXS4CWD3 (Android 13 OneUI 5.1) May 2023 Patch Level
ROM Features:
Kernel:
Stock Samsung kernel
All partitions RW
CSC features:
Call Recording
Camera shutter sound menu
Real time network speed in statusbar
AppLock Enabled
ROM Disarm:
Light ROM debloat
Disabled Encryption
Patched Samsung SmartWatch pairing
Disabled stock recovery-from-boot
Modded Settings/Services
Screenshots in secure apps allowed
Phone status: Official
Software Info ROM Details
Back2Kill mod
Fixes:
Galaxy watch pairing
Secure Folder
Other Tweaks/Mods:
Warning boot screen removed, BR custom boot animation
Automatic EFS backup
Various build prop tweaks
Pre-rooted with Magisk Alpha (needs magisk alpha app install after flash)
Netflix playback (SD only)
Dual messenger app patched for several apps
S23 picture object remover
ROM constraints:
Needs to install Magisk canary 26201 app in twrp after ROM flash
For SafetyNet and Wallet you must install latest kdrag0n v2.4.x magisk module and enable Zygisk
Not working
Knox related apps: Samsung Pay, Samsung AutoFill
Changelog
v3.3
- Updated to latest firmware [CWD3] OneUI 5.1 **You must be on CWD3 firmware to flash BR3.3 ROM zip**
- Kernel patched with magisk canary 26101
- No BR3.3 for S906B due to missing testers/requests
#######################################
PREVIOUS VERSION
#######################################
v3.2
- Updated to latest firmware [CWCG] OneUI 5.1 **You must be on CWCG firmware to flash BR3.2 ROM zip**
- Kernel patched with magisk canary 26101
Credits
- John Wu for Magisk
- Mr. Waehere for the kitchen and support
- afaneh92 for S22 TWRP and endless help
- LeeXDA18 for help with knox/VK removal and S23 picture object remover port
- the elite team of ROM testers (Mark, Nuno, Kuba, Ashley and many more)
- dutchman89 for Beyond boot logo
- If you like my work and want to support me, consider buying me a coffee (PayPal link)
Download Links
CURRENT VERSION
###############################
SM-S908B ROM Download CWD3 [BR3.3]
SM-S906B ROM Download CWBE (BR3.3)
SM-S901B ROM Download CWD3 (BR3.3)
###############################
OLDER VERSION
###############################
SM-S906B ROM Download CWBE (BR3.1)
###############################
OTHER FIXES
###############################
Bixby fix for BR3.3 CWD3
###############################
USEFUL LINKS
###############################
BeyondROM S22 Group [Telegram]
S22 TWRP [XDA]
S22+ TWRP [XDA]
S22U TWRP [XDA]
If you like my work, support me and buy me a coffee (PayPal link)
Installation:
Spoiler: Coming from full stock
**Note: These steps will trip Knox and possibly void warranty on your phone**
**Note: Following these steps you will lose data on your phone, so back-up before continuing**
UNLOCK BOOTLOADER:
Enable Developer Options: Settings > About Phone > Software Information > Keep clicking 'Build Number'
Enable OEM Unlock: Settings > Developer Options > Click 'OEM Unlock' to enable it
Turn of phone
Hold Volume Up + Volume Down, plug in USB cable (PC to Phone)
You’re now in download mode (Blue Screen)
Press and hold Volume up (bootloader unlock screen)
Pres Volume up to confirm
**Warning** This will now wipe your phone and restart and couple of times but this is normal
When the phone is booted, connect to internet, skip the initial setup, you don't need to sign in to anything
Unlock should be enabled now and greyed out
Congrats you've unlocked your bootloader !
FLASH TWRP + PATCHED VBMETA
OEM Unlock should be enabled now and greyed out
Download TWRP and patched vbmeta for your device from above links
]Boot phone into download mode (from power off Volume Up + Volume Down and plugin USB cable)
Press Volume up to continue
Load up ODIN
Go to options and turn off auto reboot
Select USERDATA slot and select the TWRP+Patched VBMETA file tar you built (Device Specific)
Click Start and wait for Odin to complete with a PASS message
Now Keep USB cable plugged in, hold Volume Down and Power and as soon as the screen goes black press and hold Volume Up and Power
You should now be in TWRP
IN TWRP
Do a full wipe (wipe > Format Data > type 'yes' when asked and confirm)
Reboot phone back to recovery (Reboot > Recovery)
Download ROM and copy either to the phone (PC to Phone) or to a USB OTG device
FLASH ROM:
In TWRP click 'Install'
If using OTG click 'select storage', select 'USB OTG'
Browse to the location of the ROM zip on the USB device, Select and swipe to confirm
Follow the on-screen options
When flash is complete, click 'save logs' (for later use)
Click finish
Reboot to System
After flash and setup complets, download and install Magisk Canary app from Magisk github and install it; when you run for the first time the magisk will need to do some setup and will then automatically reboot the phone
After reboot you're all set, congratulations !
Spoiler: Updating BeyondROM to latest version
When upgrading FW to flash the latest BR these are the recommended steps.
It is assumed that you are already on BeyondROM.
Download the latest/required version of the firmware (Samfirm, Frija etc...)
Unzip the stock ROM zip
Boot the phone into Download mode
Load up Odin and uncheck auto-reboot in Odin settings
Insert the relevant files into their slots (BL = BL, AP=AP, CP=CP, CSC=HOME_CSC) **It's important to use HOME_CSC to keep your data intact**
In the USERDATA slot insert your TWRP+Patched VBMETA tar file (Device Specific)
Start Flash
When flashing completes, keep USB plugged in, hold Volume Down + Power, as soon as the screen goes black hold Volume Up + Power pressed to enter TWRP
When in TWRP, flash latest BeyondROM
When complete, save logs, reboot to system
Enjoy!
Enjoy flashing good people !
reserved
Amazing I have been a great fan of your ROM. unfortunatetly for me I have the sm -
s908E. perhaps in the future you can make a compatible rom for this snapdragon. thanks
luisnica98 said:
Amazing I have been a great fan of your ROM. unfortunatetly for me I have the sm -
s908E. perhaps in the future you can make a compatible rom for this snapdragon. thanks
Click to expand...
Click to collapse
I'm sorry, I think my words were very basic. It's a language translation problem. maybe i meant. "If I'm lucky, perhaps in the future, you'll have time to make the ROM for the phone version I use"
Sorry but I never had a snapdragon device. Chances to do a br for it are very slim.
The rom have been updated to latest Oct FW AVI7
starbucks2010 said:
The rom have been updated to latest Oct FW AVI7
Click to expand...
Click to collapse
Nice, thank you!
So, considering the installation instructions, does that mean we need to go to AVI7 firmware in order to flash your ROM, or what is the situation when updating the ROM? I'm on your first build.
yes, you need to flash first stock AVI7 fw + twrp_patched_vbmeta in USERDATA slot, reboot to twrp and flash BR16
starbucks2010 said:
yes, you need to flash first stock AVI7 fw + twrp_patched_vbmeta in USERDATA slot, reboot to twrp and flash BR16
Click to expand...
Click to collapse
So most likely it will result in a data wipe. Till now I didn't succeed to flash stock ROM without wiping. (Works fine in TAB S7 + and S8U) but kills my data in S22u even when using the home csc.
Thanks anyways.
If you use HOME_CSC when you flash stock, it will preserve your data
starbucks2010 said:
If you use HOME_CSC when you flash stock, it will preserve your data
Click to expand...
Click to collapse
I already tried it multiple times, it wiped my data regardless. That's how I do it on my TABs
ekin_strops said:
I already tried it multiple times, it wiped my data regardless. That's how I do it on my TABs
Click to expand...
Click to collapse
maybe because of flashing TWRP with the vbmeta patch? disabling encryption formats data partitions, doesn't it
ekin_strops said:
So most likely it will result in a data wipe. Till now I didn't succeed to flash stock ROM without wiping. (Works fine in TAB S7 + and S8U) but kills my data in S22u even when using the home csc.
Thanks anyways.
Click to expand...
Click to collapse
if you use stock fmw rooted you can update firmware using home csc without wiping data
if you are using beyond rom make sure you use latest twrp from afaneh92 android file host
if you still have data encrypted you need to flash twrp+ vbmeta, format data and reboot to twrp. after this you can flash beyond rom and no need to format data anymore
great rom Andrei
using with my s22+
0 bugs, everything is running smooth
good job
Hi, this rom is really awesome, is it possible to flash the "Loki Kernel" on it...?
Thanks for your answers, Bruno
brunsman6229 said:
Hi, this rom is really awesome, is it possible to flash the "Loki Kernel" on it...?
Thanks for your answers, Bruno
Click to expand...
Click to collapse
Of course
Since this gets rid of some Knox stuff, is it possible to then use the Samsung health app with a tripped knox?
erik2041999 said:
Since this gets rid of some Knox stuff, is it possible to then use the Samsung health app with a tripped knox?
Click to expand...
Click to collapse
On telegram group (link in first post) You have flashable zip with working Samsung health
Kuba1996 said:
On telegram group (link in first post) You have flashable zip with working Samsung health
Click to expand...
Click to collapse
Is it the latest one though? Or is it the older one that worked with a tripped knox?
Edit: yeah I looked and it is, cool thanks man
For many years I have been using exynos samsung galaxy cellphones. For reasons I dont know Samsung decided to make the S22 series for latinamerica with a snapdragon chip. Even when I should be happy cause snapdragon its said that is faster than exynos, I cannot keep having BR. Its a pity.