This is a discussion thread dealing with and related to
all of the Secret Codes for the Samsung Galaxy S4
Here you will find all of the official dial pad codes for
Samsung Galaxy S4 and other Samsung phones
Here is a complete listing of these codes:
----------------------------------------------------------------------
*#06# Shows IMEI (International Mobile Equipment Identity) number
*#0*# LCD Test Menu
Dial the secret code *#0*#. Now you get a screen with title LCD TEST as shown in image and
below that you have lots of option to test various hardware parts of your phone such as speaker, sensor, lcd, etc
*#8999*523# LCD Brightness
*#1234# To check Software and Hardware information, PDA, CSC, MODEM (Firmware Version)
*#2222# H/W Version
*#*#4636#*#* user statistics and Phone Info
*#0011# Displays status information for the GSM
*#7780# Factory Reset
*2767*3855# Full factory reset (Don’t dial unless you have problem, it does not ask you to confirm )
*#12580*369# SW & HW Info
#*#8377466# S/W Version & H/W Version
#*2562# Restarts Phone
#*3849# Restarts Phone
#*3851# Restarts Phone
#*3876# Restarts Phone
#*5376# DELETE ALL SMS!!!!
*#197328640# Service Mode
*#0228# Battery status (ADC, RSSI reading)
*#32489# Service mode (Ciphering Info)
*#2255# Call List
#*3888# BLUETOOTH Test mode
#*7828# Task screen
*#5282837# Java Version
*#232337# Bluetooth MAC Adress
*#232331# Bluetooth Test Mode
*#232338# WLAN MAC Address
*#232339# WLAN Test Mode
*#8999*8378# Test Menu
*#0842# Vibra Motor Test Mode
*#0782# Real Time Clock Test
*#0673# Audio Test Mode
*#0*# General Test Mode
*#2263# RF Band Selection / Network modes select
*#9090# Diagnostic ConfiguratioN
*#7284# USB I2C Mode Control
*#872564# USB Logging Control
*#4238378# GCF Configuration
*#0283# Audio Loopback Control
*#1575# GPS Control Menu
*#3214789650# LBS Test Mode
*#745# RIL Dump Menu
*#746# Debug Dump Menu
*#9900# Takes you to System Dump, where Disabling Fast Dormancy gives a boost to your network
speed on some networks (both wifi and Gprs), same code to re-enable it
*#44336# Sofware Version Info
*#0289# Melody Test Mode
*#2663# TSP / TSK firmware update
*#03# NAND Flash S/N
*#0589# Light Sensor Test Mode
*#0588# Proximity Sensor Test Mode
*#273283*255*3282*# Data Create Menu
*#273283*255*663282*# Data Create SD Card
*#3282*727336*# Data Usage Status
*#7594# Remap Shutdown to End Call TSK
*#34971539# Camera Firmware Update
*#526# WLAN Engineering Mode
*#528# WLAN Engineering Mode
*#7412365# Camera Firmware Menu
*#07# Test History
*#3214789# GCF Mode Status
*#272886# Auto Answer Selection
*#8736364# OTA Update Menu
*#301279# HSDPA/HSUPA Control Menu
*#7353# Quick Test Menu
*2767*4387264636# Sellout SMS / PCODE view
*#7465625# View Phone Lock Status
*7465625*638*# Configure Network Lock MCC/MNC
#7465625*638*# Insert Network Lock Keycode
*7465625*782*# Configure Network Lock NSP
#7465625*782*# Insert Partitial Network Lock Keycode
*7465625*77*# Insert Network Lock Keycode SP
#7465625*77*# Insert Operator Lock Keycode
*7465625*27*# Insert Network Lock Keycode NSP/CP
#7465625*27*# Insert Content Provider Keycode
*#272*IMEI# then we will get buyer code (For samsung galaxy sIII csc code)
*#*#7780#*#* Factory data reset – Clears Google-account data, system and program
settings and installed programs. system will not be deleted, and OEM programs, as well
as My Documents (pictures, music, videos)
Feel free to post any questions or comments you may have relating to these codes.
Is anyone else having trouble getting these to work on kangakat or kit Kat in general? I had them working fine in kangabean and used it to diagnose a miscalibrated proximity sensor (that I then was able to reset)
Thank you for the list.
I'm on an att business account and have the ability to dial *data# to get a data usage report via sms. Thanks for the list!
How bout giving him a thanks on the forums lol...
mf3 rooted SHOstock 2.3
USSD codes are either carrier-specific or phone-specific.
However, my understanding is that the catch is that phone-specific means the stock ROM, not just the physical phone. So if you're running another ROM, phone-specific USSD codes may not work.
I've got CM 10.1.3, and I have not found a single phone-specific USSD code that works.
Cool
Thanks For Sharing Sir
*#8736364# OTA Update Menu
Sir,
I Need Your Help *#8736364# OTA Update Menu On AT&T S4
I Am In INDIA .. I Can't Update My Phone Via OTA Because I Unlocked My AT&T S4..
If I Change Any Setting On OTA Update Menu After I Will Get Update ?
---------- Post added at 12:21 PM ---------- Previous post was at 12:18 PM ----------
Misterjunky said:
This is a discussion thread dealing with and related to
all of the Secret Codes for the Samsung Galaxy S4
Here you will find all of the official dial pad codes for
Samsung Galaxy S4 and other Samsung phones
Here is a complete listing of these codes:
----------------------------------------------------------------------
*#06# Shows IMEI (International Mobile Equipment Identity) number
*#0*# LCD Test Menu
Dial the secret code *#0*#. Now you get a screen with title LCD TEST as shown in image and
below that you have lots of option to test various hardware parts of your phone such as speaker, sensor, lcd, etc
*#8999*523# LCD Brightness
*#1234# To check Software and Hardware information, PDA, CSC, MODEM (Firmware Version)
*#2222# H/W Version
*#*#4636#*#* user statistics and Phone Info
*#0011# Displays status information for the GSM
*#7780# Factory Reset
*2767*3855# Full factory reset (Don’t dial unless you have problem, it does not ask you to confirm )
*#12580*369# SW & HW Info
#*#8377466# S/W Version & H/W Version
#*2562# Restarts Phone
#*3849# Restarts Phone
#*3851# Restarts Phone
#*3876# Restarts Phone
#*5376# DELETE ALL SMS!!!!
*#197328640# Service Mode
*#0228# Battery status (ADC, RSSI reading)
*#32489# Service mode (Ciphering Info)
*#2255# Call List
#*3888# BLUETOOTH Test mode
#*7828# Task screen
*#5282837# Java Version
*#232337# Bluetooth MAC Adress
*#232331# Bluetooth Test Mode
*#232338# WLAN MAC Address
*#232339# WLAN Test Mode
*#8999*8378# Test Menu
*#0842# Vibra Motor Test Mode
*#0782# Real Time Clock Test
*#0673# Audio Test Mode
*#0*# General Test Mode
*#2263# RF Band Selection / Network modes select
*#9090# Diagnostic ConfiguratioN
*#7284# USB I2C Mode Control
*#872564# USB Logging Control
*#4238378# GCF Configuration
*#0283# Audio Loopback Control
*#1575# GPS Control Menu
*#3214789650# LBS Test Mode
*#745# RIL Dump Menu
*#746# Debug Dump Menu
*#9900# Takes you to System Dump, where Disabling Fast Dormancy gives a boost to your network
speed on some networks (both wifi and Gprs), same code to re-enable it
*#44336# Sofware Version Info
*#0289# Melody Test Mode
*#2663# TSP / TSK firmware update
*#03# NAND Flash S/N
*#0589# Light Sensor Test Mode
*#0588# Proximity Sensor Test Mode
*#273283*255*3282*# Data Create Menu
*#273283*255*663282*# Data Create SD Card
*#3282*727336*# Data Usage Status
*#7594# Remap Shutdown to End Call TSK
*#34971539# Camera Firmware Update
*#526# WLAN Engineering Mode
*#528# WLAN Engineering Mode
*#7412365# Camera Firmware Menu
*#07# Test History
*#3214789# GCF Mode Status
*#272886# Auto Answer Selection
*#8736364# OTA Update Menu
*#301279# HSDPA/HSUPA Control Menu
*#7353# Quick Test Menu
*2767*4387264636# Sellout SMS / PCODE view
*#7465625# View Phone Lock Status
*7465625*638*# Configure Network Lock MCC/MNC
#7465625*638*# Insert Network Lock Keycode
*7465625*782*# Configure Network Lock NSP
#7465625*782*# Insert Partitial Network Lock Keycode
*7465625*77*# Insert Network Lock Keycode SP
#7465625*77*# Insert Operator Lock Keycode
*7465625*27*# Insert Network Lock Keycode NSP/CP
#7465625*27*# Insert Content Provider Keycode
*#272*IMEI# then we will get buyer code (For samsung galaxy sIII csc code)
*#*#7780#*#* Factory data reset – Clears Google-account data, system and program
settings and installed programs. system will not be deleted, and OEM programs, as well
as My Documents (pictures, music, videos)
Feel free to post any questions or comments you may have relating to these codes.
Click to expand...
Click to collapse
Sir,
I Need Your Help *#8736364# OTA Update Menu On AT&T S4
I Am In INDIA .. I Can't Update My Phone Via OTA Because I Unlocked My AT&T S4..
If I Change Any Setting On OTA Update Menu After I Will Get Update ?
Please Please Please
Actually for some reason I can't get the majority of the codes to work on my 2 Galaxy S4s, which are running on 4.2.2 and 4.4.2 respectively. I was particularly interested in the factory reset codes because of some ongoing demo work in current Android vulnerabilities, but similarly there is no response from the dialler after entering the code.
Factory reset codes do not work, as well, on my S4 mini 9195 with 4.2.2.
Anybody knows working codes, or we should use Settings - Accounts - Backup and reset, or Recovery Mode reset option?
Nice.
It should be noted that a lot of them won't work on certain modems. When I went to mk2, I was locked out of service mode. So i have been using MDL modem to have access to more codes.
For instance running mk2 modem, when I would try *#9090# menu back, menu back, menu back, key input 1. My phone would reboot every time. Now on MDL modem. I have access again. The were other codes that did the same don't remember them.
Seems att/Samsung locked you out after each modem update.
Sent from my Nexus 7 using XDA Free mobile app
Not so good
Hi
Sorry to tell you that most of these codes don't work on my GT-I9505.
The phone has a rooted stock ROM.
jack_ssl said:
Sir,
I Need Your Help *#8736364# OTA Update Menu On AT&T S4
I Am In INDIA .. I Can't Update My Phone Via OTA Because I Unlocked My AT&T S4..
If I Change Any Setting On OTA Update Menu After I Will Get Update ?
---------- Post added at 12:21 PM ---------- Previous post was at 12:18 PM ----------
Sir,
I Need Your Help *#8736364# OTA Update Menu On AT&T S4
I Am In INDIA .. I Can't Update My Phone Via OTA Because I Unlocked My AT&T S4..
If I Change Any Setting On OTA Update Menu After I Will Get Update ?
Please Please Please
Click to expand...
Click to collapse
I don't think that Is a problem. Im in Bolivia with an unlocked sgh-i337 and received the NI1 update.
I'm in Virginia Beach, Virginia USA I have a T Mobile SGHM919 running rooted, with the sickness ROM v3 and v5 sickness theme on the dialer when I enter any code nothing happens unless unless call, when I press call it says " unable to process request" anybody know why? Fob I need to be all stock again to do it? I'm trying unlock my phone because I nerd yp leavevyhe crappy service I get from T Mobile
Sent from my SGH-M919 using XDA Free mobile app
Please Help Me
emptyPD said:
I don't think that Is a problem. Im in Bolivia with an unlocked sgh-i337 and received the NI1 update.
Click to expand...
Click to collapse
Sir , You Bought AT&T S4 From USA .. Then You Unlocked .. Came To Bolivia .. Still You Are Getting Update .. How Still You Are Using AT&T SIM CARD .. Pleas e Help Me
I have been trying for days to SIM unlock my Sprint S5 (SM-G900P) Is there anyway to revert ALL settings back to default in the Serice Menu i reach by dialing *#0011# ?
Hello,
First my phone was running CM12, and in the dialer settings i could choose a reverse lookup.
I'm from Holland and the service "Gebeld (NL)" was available.
Now did i flashed CM12S, but i can't find the service "Gebeld (NL)" anymore.
Is there a way to add a new reverse lookup service?
Hi,
I have a bad signal only when I am on 4G. So I wanted to check it in the Service Menu but it's not opening... Why?
These codes are not working:
*#0*# - hardware diagnostic tests
*#0011# - service mode (display LTE band, etc)
Rooted on stock AOE3 rom
On my 955FD y was able to access the IMS settings using shortcut master to enable VoLTE with AT&T. After the Oreo upgrade it seems that permissions were set so that i can no longer access that menu. Any other way? Not interested in rooting.
Facing the same problem, couldn't use volte
Same error
Same problem any other way or can we fix this su: not found error in shortcut masters apk.
Same error with my SM-G950U Sprint Unlocked phone
I have a Sprint branded network unlocked(by Sprint only) Galaxy S8 phone.
With Android Nougat version, the imssettings were accessible using the Shortcuts app and VoLTE was enabled. So it was working in India with Reliance JIO (who has only LTE network and accepts only VoLTE calls).
After recent Oreo update, using any Shortcut app like (More Shortcuts or Shortcut Master), the IMS settings are inaccessible. So unable to enable the IMS Service switch, thereby VoLTE.
Tried to search for the apk com.samsung.advp.imssettings. Found one over internet but couldn't replace the existing one. (Hopefully the downloaded one is not a fake app.)
I also tried to open the google imssettings option using Career Services app, but found only one option to enable WiFi calling, not the VoLTE.
Is there any permission issue with this Samsung IMS setting? Could this IMS switch ON be achieved through ADB?
Any insight or help would be helpful. Without VoLTE this phone with Reliance JIO will be virtually useless. The Jio4GVoice app is crappy as hell.
I have the same problem!
Same here, I hope there is a fix
Same problem here!
Anyone having the IMS fix for Oreo yet?
S8+ ims setting fix oreo 8.0
If you use quickshortcutmaker app to open ims settings it will launch but it needs sms code to open.....anybody have an idea of wat dis means...or how to get the sms code?
Samsung s8+ sm g955fd
Naguski2 said:
If you use quickshortcutmaker app to open ims settings it will launch but it needs sms code to open.....anybody have an idea of wat dis means...or how to get the sms code?
Samsung s8+ sm g955fd
Click to expand...
Click to collapse
It's because you're calling IMS Service, not IMS settings.
hello
my phone says that it requires aditional permission...how can i solve it?