Here is a list of video on the Galaxy Tab 3 7in and the links to the XDA threads with instructions. Videos By ME
UPDATED 5-22-14
VIDEOS
<Mod Edit: Link removed for promoting paid service.>
TWRP INSTALL PLUS ROOT
CWM RECOVERY INSTALL
INFAMOUS TAB 3 INSTALL
TWRP RECOVERY NANDROID RESTORE
GALAXY TAB 3 UNBRICK AND RESTORE
GALAXY TAB 3 ROCKET TAB ROM
GALAXY TAB 3 CRASH ROM
GALAXY TAB 3 KIDS ROM
GALAXY TAB 3 SEAL ROM
GALAXY TAB 3 PHILZ CWM RECOVERY
GALAXY TAB 3 7IN ANDROID 4.2.2 MULTI WINDOW ROM PORT
Samsung Galaxy Tab 3 7in performance upgrade
Samsung Galaxy Tab 3 7in Inspire rom review & install
Galaxy Tab 3 7in KitKat Rom install and review
Samsung Galaxy Tab 3 TranchidaKat Rom install and review
More To Come
Link to a Index of info per devices INDEX OF ROMS RECOVERIES AND MORE
T110/T111:
T210/T210R:
T211:
T217S:
Tomsgt said:
Here is a list of video on the Galaxy Tab 3 7in and the links to the XDA threads with instructions. Videos By ME
UPDATED 10-2-13
ROOT
ODIN ROOT
ANOTHER ODIN ROOT
RECOVERY
TWRP
CWM
ROMS
INFAMOUS TAB 3
Stock Deodexed T210R
CM10.1 Test Build
MODS
KERNELS
BLACKHAWK
NO NAME
FIRMWARE
T210RUEAMG4
VIDEOS
STOCK RECOVERY
TWRP INSTALL PLUS ROOT
CWM RECOVERY INSTALL
INFAMOUS TAB 3 INSTALL
TWRP RECOVERY NANDROID RESTORE
Click to expand...
Click to collapse
hi!!!! will this root method work on the 10.1 inch tab 3 also??? help lol
hackstermind said:
hi!!!! will this root method work on the 10.1 inch tab 3 also??? help lol
Click to expand...
Click to collapse
no it is for the tab 3 7in only. if I had a 10in then I would love to make those videos also but sadly I dont sorry
OP updated
hi,
is this possible for samsung tab 3 7.0 LTE (t215) ?
stanleypeh said:
hi,
is this possible for samsung tab 3 7.0 LTE (t215) ?
Click to expand...
Click to collapse
I dont think thiese files will work on that model
Any idea where can I get root for samsung t215? Been hunting all over but couldnt find
stanleypeh said:
Any idea where can I get root for samsung t215? Been hunting all over but couldnt find
Click to expand...
Click to collapse
since the firmware for the t215 is available, it shouldn't be too hard pre-root the firmware and then flash it with odin.
and there's something interesting i've found... the recovery for the t215 boots on the t217s. i haven't tried to do anything with it to see if it's fully functional or not. i haven't tried flashing boot or anything else from the t215 firmware, because i don't want to risk breaking stuff without a working custom recovery.
Thank you for this list, It helped me a lot with my T210.
SM-T217S Root
Looking for the SM-T217S (Sprint's Tab 3 LTE) root... any help?
hotaru2k3 said:
and there's something interesting i've found... the recovery for the t215 boots on the t217s. i haven't tried to do anything with it to see if it's fully functional or not. i haven't tried flashing boot or anything else from the t215 firmware, because i don't want to risk breaking stuff without a working custom recovery.
Click to expand...
Click to collapse
Can this work with Sprint model:thumbup:
Sent from my SM-T217S using Tapatalk 4
Nope note for sprint sorry. The software is different
Sent from my SM-N900V using Tapatalk
Using something other than Odin to install Roms, CWM
Hi
My device 210R is already rooted but I have tried to install CWM using ODIN but after I hit the Start button it sits there and does nothing. I am using virtualbox with XP guest so that may be the problem. Everything up to that point works as per the video and it verifies the device and the MD5 of the recovery zip. I don't have a regular XP machine to try this, just using my MAC.
So is there anything else other than ODIN to achieve this? My goal is to flash a new ROM for my 7" Tab. I have root already.
Thanks
Paraic
paraic01 said:
Hi
My device 210R is already rooted but I have tried to install CWM using ODIN but after I hit the Start button it sits there and does nothing. I am using virtualbox with XP guest so that may be the problem. Everything up to that point works as per the video and it verifies the device and the MD5 of the recovery zip. I don't have a regular XP machine to try this, just using my MAC.
So is there anything else other than ODIN to achieve this? My goal is to flash a new ROM for my 7" Tab. I have root already.
Thanks
Paraic
Click to expand...
Click to collapse
does it show device added. and do you have a com number? if so it should work.
Tomsgt said:
does it show device added. and do you have a com number? if so it should work.
Click to expand...
Click to collapse
Yes it does and has a COM number just as the howto video shows. Everything looks like it should work but when you press START it just sits there saying "SetupConnection" as below:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM.builder.touch.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
And it sits there indefinitely. The Samsung drivers are definitely there as I can browse the contents of the tablet mounted as SM-T210R in Explorer.
I'm a bit stumped and therefore was looking for an alternate method, perhaps using ADB on my MAC (or on XP).
Any help appreciated.
Paraic
P.S. it finally came back with this message:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
not sure what is failing to write here or why its having problems. I can create a New Folder on the Tablet using XP Explorer so it can write to the memory there.
I am on 4.1.2, Build jzo54k.t210rueamj1 kernel 3.4.5-1304745-user
paraic01 said:
Yes it does and has a COM number just as the howto video shows. Everything looks like it should work but when you press START it just sits there saying "SetupConnection" as below:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM.builder.touch.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
And it sits there indefinitely. The Samsung drivers are definitely there as I can browse the contents of the tablet mounted as SM-T210R in Explorer.
I'm a bit stumped and therefore was looking for an alternate method, perhaps using ADB on my MAC (or on XP).
Any help appreciated.
Paraic
P.S. it finally came back with this message:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
not sure what is failing to write here or why its having problems. I can create a New Folder on the Tablet using XP Explorer so it can write to the memory there.
I am on 4.1.2, Build jzo54k.t210rueamj1 kernel 3.4.5-1304745-user
Click to expand...
Click to collapse
Well, it turns out it worked despite the error message!
I booted into Recovery using the Pwr vol up and Home keys and there is CWM in all its glory!
Thanks for help anyhow
*Happy Tab 3 Owner*:victory:
Glad you got it working. It is really weird that you got that error. O well.
Sent from my SM-N900V using Tapatalk
I just got a SM-T310
Got any ROM's for it?
---------- Post added at 12:38 AM ---------- Previous post was at 12:34 AM ----------
I just got a SM-T310
Got any ROM's for it?
New Rocket Tab rom video added to OP
SMT211 from China
Hi,
I'm a newbie. Got my first Android tablet in the form of Tab3 7" from China recently. It was later that I realized that they used a different setup.. a lot of other features / apps that weren't installed.. unlike the Note2 phone I got locally.
So upon reading through some of the posts here and elsewhere in the Net, I realized I needed to hack into this tablet to be able to maximize my use of this, in a way that I maximize my use of my Note2 (which isn't rooted, just installed apps from Google Play)...
As this is my first time in the world of rooting, flashing ROMs for Android (I've done a couple of jb on previous iPhone models).. I am quite lost on all the terms (CWM, ODIN, etc)..
My questions now are:
1. Is there a site that I can read up on the basics? Like the terminologies and why or why not those things should be done to an Android system? Pros and Cons of doing such?
2. I see on this site that there are ROMs for T210 model.. can I safely use these in place of the currently installed and running in my T211?
Thanks.
Hey folks,
I was trying to root my never before rooted s6 today (64 gb 920 I) using the uni-kernel method using odin for 5.1.1. I put the kernel into AP, and it failed after some seconds thus resulting in the blue screen which says "error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software."
I tried that and smart switch didn't recognise my device (maybe because USB debugging wasn't on).
Thus I downloaded a stock recovery for my device and I thought I would flash it via ODI. Things go well and the progress bar is 3/4th of the way through on my device and it suddenly says FAIL (shown below). I've tried with ODIN 3.10.6 and with 3.10.7 with the same results
<ID:0/003>Get PIT for Mapping
<ID:0/003> Firmware update Start!!
<ID:0/003> cm.bin <ID:0/003>
sboot.bin
<ID:0/003>NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) Operation failed.
<OSM> All threads completed. (succeed 0/failed 1)
What's unusual about this (to the best of my knowledge through forum search. I could be wrong and this could be common. If so I apologise) is that I've seen help threads about Odin failing at hidden.img or NAND Write Start but not during system.img. Does the fact that it's failed during system.img in particular tell us something?
Also, I can't access stock recovery, just the download section.
No clue why it's doing this. I would appreciate any help possible.
Thanks so much in advance. This means a lot.
Your current phone's firmware CSC should be same or within the region CSC of your downloaded firmware.
Hidden.img do have different partition size per Country/region. If you flash a not supported firmware, it will fail.
I.e., if your from France, just download the France firmware.so that you wont need to flash a pit file for your phone.
You can Search here at forum with keyword galaxy s6 pit file.
Or probably, your pc <> phone connection is unstable. Be sure it is connected properly, the usb cable should be in good performance etc.
I had the same happening. Don't sweat it really, no need to use that Smart Switch thing, Odin should still see the phone anyway, so just go ahead and flash a different image from Sammobile, possibly use one for your country and you'll be good.
I am so lost as to what to do next, i really need guidance.
I am offering a bitcoin tip or a paypal tip to whomever helps me get my phone to work ASAP.
So i was attempting to root my phone [GALAXY S6 - SM-G920F]
Got the file from: https://autoroot.chainfire.eu/ which should've matched my Phone.
First attempt failed, got back into my phone everything is fine. Tried the same thing again, failed this time i get this message:
An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software." The logs for the times it has failed:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Tried connecting with Kies and Smart switch, none can find the device just keeps buffering and for smart switch it just say it's not supported. I am able to get into downloading mode, but that's it.
Got newest Kies, odin 3 v.10.7.exe however on my first go i noticed i had odin3 v.10.6 but now i got the latest i believe. After reading around i decided to try to fix it back to normal, so i downloaded my countries [sweden] firmware this one: http://www.sammobile.com/firmwares/confirm/57869/G920FXXU3COI9_G920FVDS3COI6_VDS/
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004>
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
And now i am here, i am truely nervous that i wont be able to get it to work.
Please Xda your my only hope. All i wanted was to free up space on my phone.. That's it.. :crying:
Ps. Worth mentioning, sometimes my usb is not recongnized and it flickers on and off (connectiong) but seems
to be fine most of the times and during the odin trials.
To root your phone, couldn't you simply flash twrp and then unikernel, like the guides say?
However, I'd try doing the following:
First of all, download the stock firmware for your version from samfirmware, then flash it via Odin (make sure the versione you download is the same you had before, or at least a more recent one).
From your logs, the problem seems to be pit file, so try reading here http://forum.xda-developers.com/showthread.php?t=1916936
If not, completely delete odin and download it again, maybe trying with a different firmware.
If everything goes well, let it boot into setup wizard, then you will able to root it again, this time following the standard procedure with odin:
- Make sure "Auto reboot" flag is NOT checked;
- Flash the twrp odin-flashable file (can't post links here, but you'll find them in General section);
- Manually reboot into recovery (Hold power+home+volume up).
- Once you're into twrp, flash unikernel and reboot.
Your phone will be rooted
Nicolò98 said:
To root your phone, couldn't you simply flash twrp and then unikernel, like the guides say?
However, I'd try doing the following:
First of all, download the stock firmware for your version from samfirmware, then flash it via Odin (make sure the versione you download is the same you had before, or at least a more recent one).
From your logs, the problem seems to be pit file, so try reading here http://forum.xda-developers.com/showthread.php?t=1916936
If not, completely delete odin and download it again, maybe trying with a different firmware.
If everything goes well, let it boot into setup wizard, then you will able to root it again, this time following the standard procedure with odin:
- Make sure "Auto reboot" flag is NOT checked;
- Flash the twrp odin-flashable file (can't post links here, but you'll find them in General section);
- Manually reboot into recovery (Hold power+home+volume up).
- Once you're into twrp, flash unikernel and reboot.
Your phone will be rooted
Click to expand...
Click to collapse
I just begain with youtubing easy way to root and i just said download odin, get the right firmware plug in an click odin.
That has failed and it's bricked, however i have tried to get my countries firmware, it didint work and produced my last log that i posted.
I am downloading another one there is two for Sweden however the other one says Sweden tre which is an operator over here and not one that i use so i doubt that will work?
i will attempt to download it but it takes 3h due to the limited speed at sammmobile.
So summarize, the sweden firmware from sammobile failed ;_;
What i do is, put phone in download mode, open odin, get the AP [Sweden from sammomobile] it finds it and press start, quickly after it says failed and i am back to square one.
I was reading the link you gave me about the pit files, it appears the error could be related to me having the wrong firmware?
I am seriously offering a bitcoin tip or a paypal tip to whomever helps me get my phone to work.
There are firmwares here for VDS.
Uninstall Kies and reboot your PC before using Odin.
blud7 said:
There are firmwares here for VDS.
Uninstall Kies and reboot your PC before using Odin.
Click to expand...
Click to collapse
Should i try all of those or just take the latest?
3H download, jesus my fiber is crying.
If you were on 5.1.1, then get 5.1.1
You can try the file you dl before. Just uninstall Kies before using Odin.
WaDoDem said:
Should i try all of those or just take the latest?
3H download, jesus my fiber is crying.
Click to expand...
Click to collapse
You dont need to download another rom dude...the problem is your usb dont get recognized and after a while it will disconnect...it happened to me aswell...searched on youtube did an easy fix and then i flashed stock rom with odin and joined marshmallow beta...
Tldr: search on youtube a fix for usb not recognized...i dont have a link sorry you have to search it by yourself its an easy fix..
Is it OK to flash with the latest stock roms? G920FXXU3? or should I flash only G920FXXU2? they are both 5.1.1 anyway.. If i flash with G920FXXU3, can i downgrade it to G920FXXU2? thanks for any help
anthonyrv03 said:
Is it OK to flash with the latest stock roms? G920FXXU3? or should I flash only G920FXXU2? they are both 5.1.1 anyway.. If i flash with G920FXXU3, can i downgrade it to G920FXXU2? thanks for any help
Click to expand...
Click to collapse
You're fine with either.
@WaDoDem
First of all, calm down. Believe me it's harder than you think to brick S6 in a not fixable way
If Odin doesn't flash official roms or you just cant suffer a slow a** download speed from SamMobile :
1. Press and hold all of 4 buttons on your device. (Volume up + Volume Down + Home + Power) your device will reboot.
2. As soon as device reboots release volume up and hold other 3 three. (Power + Home + Volume Down). Your device should boot into downloading mode.
3. Download this :
https://dl.twrp.me/zeroflte/twrp-2.8.7.2-zeroflte.img.tar.html
4. Connect your phone to your pc and flash above file with Odin. As soon as flashing process finishes, hold Power+Home + Volume Up. Now your device will boot into TWRP recovery.
5. Wait for drivers to be installed. Your pc should show phone's internal storage as connected device. If not, go to TWRP Mount section and enable MTP mode. (Or if it's enabled, disable and re enable it )
6. Download this rom :
http://forum.xda-developers.com/gal...rom-2013266107-arrow-rom-v1-0-0-fast-t3212318
And this kernel:
http://forum.xda-developers.com/gal...nified-development/kernel-vindicator-t3156281
Then put them on your phone.
7. Wipe system,data,cache and dalvik cache from twrp.
8. Install Arrow Rom first and then flash Vindicator Kernel.
9.Reboot, first boot can take up to 15 minutes
10.Continue celebrating new year [emoji14]
Sent from my SM-G920I using Tapatalk
sometimes if odin not working i restart my computer and put my mobile in downloadmode again and than i try again,most of the time it worked.....
If you think you can't find a wat at all, Samsung will help u. Download smartswitch to your PC and you can click in top corner emergency reinstall (or something like that) just put your serial number (as found on your backside of the phone)
4. Connect your phone to your pc and flash above file with Odin. As soon as flashing process finishes said:
Odin cant find the tar file.
I got odin 3V3.10.7 in options auto reboot and f. reset time are all bocked in is that right?
On files to download i am able to do, ap,cp,csc,bl neither of those help to find the recovery image that i am supposed to start?
Click to expand...
Click to collapse
Damientju said:
If you think you can't find a wat at all, Samsung will help u. Download smartswitch to your PC and you can click in top corner emergency reinstall (or something like that) just put your serial number (as found on your backside of the phone)
Click to expand...
Click to collapse
I cannot use recovery since none of the numbers i have on the back of my phone matches the one i need to enter.
i tried device initialization that led to FAILED TO UPDATE DUE TO AN ERROR.
and then smart switch recommends emergency software recovery the one you were talking about but i dont know how to get my code.
I assumed you meant to input my phones IMEI however that did not prove to be correct.
WaDoDem said:
I cannot use recovery since none of the numbers i have on the back of my phone matches the one i need to enter.
i tried device initialization that led to FAILED TO UPDATE DUE TO AN ERROR.
and then smart switch recommends emergency software recovery the one you were talking about but i dont know how to get my code.
I assumed you meant to input my phones IMEI however that did not prove to be correct.
Click to expand...
Click to collapse
Relax, flip your phone and on the bottom you'll see (barely visible) text. The last line it says: 'S/N:'
The code after is your serial number. So not your IMEI
The same code is found on the stickers you'd got with your phone
Damientju said:
Relax, flip your phone and on the bottom you'll see (barely visible) text. The last line it says: 'S/N:'
The code after is your serial number. So not your IMEI
The same code is found on the stickers you'd got with your phone
Click to expand...
Click to collapse
When i go to Smart switch Emergency Software recovery and input my S/N R58G52AMP1J
it says:
''Unable to find the recovery code. Check the recovery code in the PC's Emergency Software Recovery menu, or contact the samsung service center.''
When i did Device initialization used my model nr and S/N: R58G52AMP1J, halfway through completing the process, the first one did 100% then the next loading didint start got the error and that re-directed me to try Emergency Software Recovery.
WaDoDem said:
When i go to Smart switch Emergency Software recovery and input my S/N R58G52AMP1J
it says:
''Unable to find the recovery code. Check the recovery code in the PC's Emergency Software Recovery menu, or contact the samsung service center.''
When i did Device initialization used my model nr and S/N: R58G52AMP1J, halfway through completing the process, the first one did 100% then the next loading didint start got the error and that re-directed me to try Emergency Software Recovery.
Click to expand...
Click to collapse
HI
i know your problem , irecently f*cked my phone
I was bare worried however i was able to fix itnw
Download Both file and flash the pit first
and flash the Firmware
And make sure your using ODIN Odin v3.10.7
IF its fix let me know
[email protected] said:
HI
i know your problem , irecently f*cked my phone
I was bare worried however i was able to fix itnw
Download Both file and flash the pit first
and flash the Firmware
And make sure your using ODIN Odin v3.10.7
IF its fix let me know
Click to expand...
Click to collapse
This is the log from when i failed to start/flash the PIT. seconds later my usb was un recognised.
<ID:0/006> Added!!
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006>
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
yes
Nicolò98 said:
To root your phone, couldn't you simply flash twrp and then unikernel, like the guides say?
However, I'd try doing the following:
First of all, download the stock firmware for your version from samfirmware, then flash it via Odin (make sure the versione you download is the same you had before, or at least a more recent one).
From your logs, the problem seems to be pit file, so try reading here http://forum.xda-developers.com/showthread.php?t=1916936
If not, completely delete odin and download it again, maybe trying with a different firmware.
If everything goes well, let it boot into setup wizard, then you will able to root it again, this time following the standard procedure with odin:
- Make sure "Auto reboot" flag is NOT checked;
- Flash the twrp odin-flashable file (can't post links here, but you'll find them in General section);
- Manually reboot into recovery (Hold power+home+volume up).
- Once you're into twrp, flash unikernel and reboot.
Your phone will be rooted
Click to expand...
Click to collapse
If Odin says no PIT, he'll need to Odin the PIT file for his device first then Odin the factory firmware.
PS...I'm just browsing threads and stopped here, hopefully to help. I'll keep reading. lol
---------- Post added at 04:43 PM ---------- Previous post was at 04:41 PM ----------
WaDoDem said:
This is the log from when i failed to start/flash the PIT. seconds later my usb was un recognised.
<ID:0/006> Added!!
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006>
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Click to expand...
Click to collapse
Did you get the appropriate PIT file for your devices Internal storage? It does matter whether its the 32 64 or 128GB version.
sd_N said:
If Odin says no PIT, he'll need to Odin the PIT file for his device first then Odin the factory firmware.
PS...I'm just browsing threads and stopped here, hopefully to help. I'll keep reading. lol
---------- Post added at 04:43 PM ---------- Previous post was at 04:41 PM ----------
Did you get the appropriate PIT file for your devices Internal storage? It does matter whether its the 32 64 or 128GB version.
Click to expand...
Click to collapse
I just downloaded and tried the pit that above user posted.
https://drive.google.com/folderview...sharing&tid=0B40ItdHKfkyQd1hJQXVDU3dDU2c#list
It's a Galaxy s6 32GB.
Previously my device was in a state where I couldn't get into any mode other than download mode after unsuccessfully trying to root my device (it would tell me to launch kies, even though kies could not detect my device, and my device does not support initialisation). For some extra info, after rooting my device almost every app would stop responding instantly.
After about 50 tries (of the same .pit file) I managed to flash a pit file successfully (if flash is the correct term) and now I can launch my phone again, it brings me to the initial set up page but I constantly get that google services has stopped responding, stopping me from finishing the set up process. When I do the volume up + home + power now it comes up with a red android for 'chainfire auto root' and does some random stuff then reboots my phone (but has no actual visual effect). Now I am trying to flash the stock firmware for my device but i get the following issue:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Surely this shouldn't be happening as I literally just flashed a .pit file in order to get my device working again? Anyway, any advice is appreciated and sorry if any information I gave was hard to follow because this is my first time rooting
XDA Visitor said:
Previously my device was in a state where I couldn't get into any mode other than download mode after unsuccessfully trying to root my device (it would tell me to launch kies, even though kies could not detect my device, and my device does not support initialisation). For some extra info, after rooting my device almost every app would stop responding instantly.
After about 50 tries (of the same .pit file) I managed to flash a pit file successfully (if flash is the correct term) and now I can launch my phone again, it brings me to the initial set up page but I constantly get that google services has stopped responding, stopping me from finishing the set up process. When I do the volume up + home + power now it comes up with a red android for 'chainfire auto root' and does some random stuff then reboots my phone (but has no actual visual effect). Now I am trying to flash the stock firmware for my device but i get the following issue:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Surely this shouldn't be happening as I literally just flashed a .pit file in order to get my device working again? Anyway, any advice is appreciated and sorry if any information I gave was hard to follow because this is my first time rooting
Click to expand...
Click to collapse
Hello, and welcome to XDA!
Not sure how to target this one; you should find your help in this thread:
> Samsung Galaxy S 4 i9500, i9505, i9505G, i9506 > Galaxy S 4 Q&A, Help & Troubleshooting > [HELP THREAD] Galaxy S4 | Ask any question | Noob friendly.
Please note you will need an XDA account in order to post there.
Hope this helps, and good luck!
OfficerJimLahey said:
Hello, and welcome to XDA!
Not sure how to target this one; you should find your help in this thread:
> Samsung Galaxy S 4 i9500, i9505, i9505G, i9506 > Galaxy S 4 Q&A, Help & Troubleshooting > [HELP THREAD] Galaxy S4 | Ask any question | Noob friendly.
Please note you will need an XDA account in order to post there.
Hope this helps, and good luck!
Click to expand...
Click to collapse
OP here, thanks for the help. I went through it and managed to restore my phone to stock.
For anyone else with the same issue as me this is how I fixed it:
Restart computer, disable antivirus, flash pit on its own, flash pit with firmware, it gets to 99% finished and then fails, and then flash pit on its own again (untick PDA).
Well, now to attempt to root it again Thanks again.