Hi everyone
Has anybody tested an "AOSP M Preview" build from FXP on D2303? Is it good? I mean, what is working and what is not (ex. camera ofc). I'd like to test it out but I don't know if it's worth. Or is there anybody who builded such rom from source (dev-prev 3)?
Thanks for answers
Th3 Ant said:
Hi everyone
Has anybody tested an "AOSP M Preview" build from FXP on D2303? Is it good? I mean, what is working and what is not (ex. camera ofc). I'd like to test it out but I don't know if it's worth. Or is there anybody who builded such rom from source (dev-prev 3)?
Thanks for answers
Click to expand...
Click to collapse
I flashed it, and think it's quite old release. It's from firsts of July. In my case, SystemUI is broken , no navbar nor status bar. Calls are working, proximity sensor is working too. Volume rocker didn't work too, mainly because of systemui crash. Headphones also work. Network (3g) seemed to work fine too. And that's all i tried. I don't recommend using it until they update it.
Thanks
Related
hello guys, I got this iphone 4s clone mt6575. since then, ive always wanted to get a new rom for this phone. i've worked on porting some CyanogenMod 7 on this device but it doesnt boot. please help me im just a newbie and im sorry for my bad english:crying:
this is the backup of my stock rom
www dropbox com/s/mma4wgc1n6uw1jr/NastyJeax_build.V1.0.0.rar
dont be bothered with the build coz i made some modifications of this. lol
hope you guys help me with this. PLEASE.
you cannot get cyanogenmod running on your particular device at this time. a cyanogenmod based on this chipset is in work, but is barely working yet. (just SystemUI starts, everything will FC).
ouch.. . that doesn't sound good.. anyway, can u give me links to the cyanogenmod development of this chipset? please
joevenrey said:
ouch.. . that doesn't sound good.. anyway, can u give me links to the cyanogenmod development of this chipset? please
Click to expand...
Click to collapse
They are gonna need it as without the full and proper kernel source code for each and every device that runs that chip it will never work completely. This is the reason CM doesnt support cheap knock offs.
zelendel said:
They are gonna need it as without the full and proper kernel source code for each and every device that runs that chip it will never work completely. This is the reason CM doesnt support cheap knock offs.
Click to expand...
Click to collapse
I had CM10 on my Jiayu G3 with the 6577. I'm sure it could be done someday. It actually ran quite smoothly. It just had a few bugs with some apps and had a battery drain but was otherwise rock solid.
think its possible for this chipset (MT6575) coz i found some posts proving that they have sucesfully ported CM7 and i actually tried to port using thier ROM with no luck at all. why my system apps starting with "BR" like BRMms.apk?
hi all
i have just got my bro's xperia j with me for few days
and i am searching for working CM rom 4.2.2 or above but not able to seach
can any one help me buy suggesting 4.2.2+ roms
thanks
chauhanjayc said:
hi all
i have just got my bro's xperia j with me for few days
and i am searching for working CM rom 4.2.2 or above but not able to seach
can any one help me buy suggesting 4.2.2+ roms
thanks
Click to expand...
Click to collapse
Currently there is only 4.0,4.1.2 and 4.4 rom for Xperia J
If you want a 4.2.2+ rom,there is only one 4.4 rom,You may want to know that it's still in alpha version,laggy and camera not working
link below
http://forum.xda-developers.com/xpe...iro-tipo-edevelopment-cyanogenmod-11-t2699996
lhkakex said:
Currently there is only 4.0,4.1.2 and 4.4 rom for Xperia J
If you want a 4.2.2+ rom,there is only one 4.4 rom,You may want to know that it's still in alpha version,laggy and camera not working
link below
http://forum.xda-developers.com/xpe...iro-tipo-edevelopment-cyanogenmod-11-t2699996
Click to expand...
Click to collapse
thanx for reply
its been almost 12 hrs and i have tried too many roms on xperia j
and my experience says using stock .31 ftf give me best performance and battery life
i have tried stock base rom having z or z2 stuff but all are having some issue like white text in setting>app>downloaded and some are having lags
also text issue in some other areas
can you suggest me fully customized and properly build customer rom 4.1.2 having no issues and perfect for daily drive
thanx
chauhanjayc said:
thanx for reply
its been almost 12 hrs and i have tried too many roms on xperia j
and my experience says using stock .31 ftf give me best performance and battery life
i have tried stock base rom having z or z2 stuff but all are having some issue like white text in setting>app>downloaded and some are having lags
also text issue in some other areas
can you suggest me fully customized and properly build customer rom 4.1.2 having no issues and perfect for daily drive
thanx
Click to expand...
Click to collapse
Sorry for late reply,
I suggest you to use PA rom made by lozohcum,it's base on cm10
PA ROM : http://forum.xda-developers.com/showthread.php?t=2326477
As you tried a few custom rom,you may notice that the screen won't light up when someone dial-in, you need to press the lockscreen button twice in order to pick up the phone.
also,the illumination bar isn't working normally in cm10,you can try it first and you can disable it from setting page after you flash the rom.
------------------------------------------------------------------------------------------------------
You might want to use walkman to work on your phone,I am using this,
Download : http://d-h.st/HOJ
Original link : http://forum.xda-developers.com/showpost.php?p=43100933&postcount=229
Since album and movie app update a lot, google yourself "album for 4.1.2" and "movie for 4.1.2"
It's better for you to use CM10 or stock JB since the CM11 is still buggy
If you fell your phone is laggy, use vengance kernel for the stock JB 4.1.2
Here is the list of tweaks, http://forum.xda-developers.com/showthread.php?t=1947926
It works for all phone.
Hopes it help you! :laugh:
[Q&A] [ROM][DEV][D2303][4.4.4] CyanogenMod 11 - Alpha 1| Developement & Discussion
Q&A for [ROM][DEV][D2303][4.4.4] CyanogenMod 11 - Alpha 1| Developement & Discussion
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
no network whine cyanogenmod 11 flash in xperia m2 dual d2302
plz fix this bug b'coz i love cyanogenmod porting
plz port this to my xperia m2 dual D2302........
fault
hye
i have updated my sony xperia m2 to cm11 but i don't have my recovery anymore and i have no signal
the phone wont boot anymore after i flashed cm11, just lovely, flashing over stock rom and ill give it another shot, anyone with suggestions, btw same thing happened when i tried to flash the deodex..
edit, flashed stock rom and tried again, this time at least the phone managed to boot till the sony logo but thats it. Only my device is a screw up <_<
Good job bro!! i have waiting for along time and please porting to Device model number D2305
ariqrizqullah said:
Good job bro!! i have waiting for along time and please porting to Device model number D2305
Click to expand...
Click to collapse
Less than a month and there's a prototype about CyanogenMod for Xperia M2 Eagle (D2303). But, it's only on Alpha, still too much way to go.
Personally I hope that they fix everything and works fine for go to D2302, D2305 and Eagle Rex (D2306) devices soon.
Either way, great job 'til now!
Guys, it's stated RIL (Mobile Network) is not working in main post. If that, or any other bug presents a problem for you, don't use this build, keep waiting, all, or atleast most of bugs will be squashed soon.
Dual SIM support comes after all bugs listed in 1st post of a thread are fixed.
Does this ROM work on the D2306 model of the Xperia M2 or no?
Lol
Make it official duh :silly:?, cause cm 11.2 will be easier to compile and create whit more devs :highfive:,
one more thing, bring back the original style of xperia roms :good:
KamranMackey said:
Does this ROM work on the D2306 model of the Xperia M2 or no?
Click to expand...
Click to collapse
Not full. Everything goes fine in Xperia M2 Eagle Rex (D2306) using this CyanogenMod. But, the basebands used on networks connections are differents and there's a problem to solve. That's the only difference between two devices, just the band they use.
So, we must wait for a Xperia M2 Eagle Rex CyanogenMod with the basebands directed to our devices.
I don't even know if using that CyanogenMod will brick your phone, but, I don't think so D:.
Regards
Now this will be an interesting development. Probably it would take some months for a relatively stable and functional build to come out. This based on experience with my previous device.
I hope CM 11 for M2 would be out in time, before 5.0 Lollipop gets the CM treatment.
You can speed things up by helping developers and posting logs of current build. This is based on experience with my previous device.
RatchetHacked said:
Make it official duh :silly:?, cause cm 11.2 will be easier to compile and create whit more devs :highfive:,
one more thing, bring back the original style of xperia roms :good:
Click to expand...
Click to collapse
It will go official after all major bugs are gone, and everything is confirmed working over a few builds.
xLobito said:
Not full. Everything goes fine in Xperia M2 Eagle Rex (D2306) using this CyanogenMod. But, the basebands used on networks connections are differents and there's a problem to solve. That's the only difference between two devices, just the band they use.
So, we must wait for a Xperia M2 Eagle Rex CyanogenMod with the basebands directed to our devices.
I don't even know if using that CyanogenMod will brick your phone, but, I don't think so D:.
Regards
Click to expand...
Click to collapse
That's correct. As far as I'm concerned about dual sim support there is a script which will look for a model number and according to that load a RIL driver for SS or DS.
ReznorNInchNails said:
You can speed things up by helping developers and posting logs of current build. This is based on experience with my previous device.
Click to expand...
Click to collapse
Right, this is a prototype so you guys can help me to build "not working list"
i am add multi sim option on setting
i just libs and framwork from stock ftf to this zip and flash but there is no network problem solved...plz solved fast......
RIL is not working. Have you read list what's working/not working?
one more tini
what about the work that ur doing for compiling the camera? is it almost done r smthng?
Welp, Sony's BT drivers suck. That, or the M2 sucks. I'm getting audio skips with my BT headset, just like I do on the stock ROM (and 4.4 is worse than the 4.3 one). Same files played back via headphone out have no skips. The same headphone doesn't have any troubles on the old Xperia Arc and Nexus 7 2013, so it's definitely the M2 at fault here.
Edit: Actually, it's _much_ worse with CM. I'm getting audio skips every 10 seconds, while it's about 1 per minute on official 4.4.2 and about 1 per 30 min on official 4.3... are there any settings you can change with respect to A2DP audio buffers or similar?
Crim Soukyuu said:
Welp, Sony's BT drivers suck. That, or the M2 sucks. I'm getting audio skips with my BT headset, just like I do on the stock ROM (and 4.4 is worse than the 4.3 one). Same files played back via headphone out have no skips. The same headphone doesn't have any troubles on the old Xperia Arc and Nexus 7 2013, so it's definitely the M2 at fault here.
Edit: Actually, it's _much_ worse with CM. I'm getting audio skips every 10 seconds, while it's about 1 per minute on official 4.4.2 and about 1 per 30 min on official 4.3... are there any settings you can change with respect to A2DP audio buffers or similar?
Click to expand...
Click to collapse
Then that's problem only on your M2 cuz my one is grand XD 4.4.2 here and no skips at all...
Sent from my D2303 using xda premium
proadi96 said:
Then that's problem only on your M2 cuz my one is grand XD 4.4.2 here and no skips at all...
Click to expand...
Click to collapse
Which headset are you using?
Crim Soukyuu said:
Which headset are you using?
Click to expand...
Click to collapse
It's Maginon RBS - 100, it's a Bluetooth speaker
Sent from my D2303 using xda premium
Hi there. I'd like to ask our fellow developers if they would be able to port PA 4.6 from Z2 to our Z3. If i am informed correctly there shouldn't be so much work as Z2 and Z3 are pretty much identical. @slipsystem, @Myself5, @Alx31TLse and @Untouchab1e. slipsystem has developed an patch for stock roms. Wouldnt be something similiar possible with aosp roms like PA? Thanks in advance for your replies.
kuboweb said:
Hi there. I'd like to ask our fellow developers if they would be able to port PA 4.6 from Z2 to our Z3. If i am informed correctly there shouldn't be so much work as Z2 and Z3 are pretty much identical. @slipsystem, @Myself5, @Alx31TLse and @Untouchab1e. slipsystem has developed an patch for stock roms. Wouldnt be something similiar possible with aosp roms like PA? Thanks in advance for your replies.
Click to expand...
Click to collapse
I'd love to help out but unfortunately, the little spare time I have is spent on CM12 at the moment Im afraid. Good luck though
Untouchab1e said:
I'd love to help out but unfortunately, the little spare time I have is spent on CM12 at the moment Im afraid. Good luck though
Click to expand...
Click to collapse
Let's hope that this awesome ROM wont stay ignored by other developers. However, i guess you could say (being developer) if it would be hard to do this.
kuboweb said:
Let's hope that this awesome ROM wont stay ignored by other developers. However, i guess you could say (being developer) if it would be hard to do this.
Click to expand...
Click to collapse
I know very little about Paranoid Android so I cant really say, but yes, the Z3 and Z2 are very similar, the only tricky part really is rild, but it should be fairly straight forward to port it, yea.
I will have a look into it. But the Patcher will only work on stock roms as custom roms require a custom kernel. I will see if I am able to port pa using cm as a Base. I cannot build pa from source as I don't have a good enough Internet connection.
slipsystem said:
I will have a look into it. But the Patcher will only work on stock roms as custom roms require a custom kernel. I will see if I am able to port pa using cm as a Base. I cannot build pa from source as I don't have a good enough Internet connection.
Click to expand...
Click to collapse
thanks, much appreciated! please let me know how it goes, if you need something just ask. I do have a great connection (90mbps down, 30 up)
kuboweb said:
Hi there. I'd like to ask our fellow developers if they would be able to port PA 4.6 from Z2 to our Z3. If i am informed correctly there shouldn't be so much work as Z2 and Z3 are pretty much identical. @slipsystem, @Myself5, @Alx31TLse and @Untouchab1e. slipsystem has developed an patch for stock roms. Wouldnt be something similiar possible with aosp roms like PA? Thanks in advance for your replies.
Click to expand...
Click to collapse
Hey I had a look at CM 11 Development .
http://forum.xda-developers.com/z3/orig-development/rom-unofficial-cm11-xperia-z3-t2892718
so the following features wont work in PA ether
Camera
Audio
RILD
Probably a lot more...
I will try to port it anyways just to test my skills. but in order for those features to work I need a functional CM11 build to work from.
Although it sounds bad, i guess theres nothing you can do. But, if you are trying to build from cm instead of aosp, it means that pa5 should be portable right? As we have a "fully" functional cm12
Hi all,
first of all, my problem is related to Moto G 4G (peregrine model), i don't know if (but it is probably) this occur with Falcon.
I bought a clone of pressy button (http://forum.xda-developers.com/showthread.php?t=2742665) and i'm pretty happy with it on stock rom, i can answer call with one click and launch torch with a long press on it.
The strange thing is that it doesn't work on any custom rom i tried, i tried with all available apps, but none handles the clicks as it should, so i assume there's something to do with CM 12, maybe it is missing some drivers that are present in stock rom ?
I should downgrade to CM11 to see if it's working or not... i'll tell you later.
Does anybody use such a thing and got it working on a custom rom ?
Any help would be greatly appreciated, thank you and have a great day.