Stock Tars AOGE & BOH4 ... + HOW TO ROOT THE Note 5 Noble Kernel Build 3 • 9/4/15 •
Special Thanks -- Mocsab ..........
Stock Tar ** TUVU1AOGE ** can be found here : https://www.androidfilehost.com/?fid=24052804347799039
*** Stock Tar Latest Release 9/2/15 *** -- TUVU1BOH4 https://www.androidfilehost.com/?fid=24052804347807913
Here is the Open Source Link Samsung released the Source Code today !!! Awesome !!!
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=N920
HOW TO ROOT THE NOTE 5 .......
1st Thing to do... make sure you have enabled developer mode, click OEM unlock to On .... allow USB debugging, and allow unknown sources
1. Download Odin 3.10.7 attached D/L in the OP ...Also.... make sure you have Samsung drivers loaded on your computer
2. Down TWRP Alpha920T 2.8.7.1 also in a tar here : https://www.androidfilehost.com/?fid=24052804347802037
3. Download the Noble Root tar from here: ...Special thanks to MANH-IT for this .............. https://www.androidfilehost.com/?fid=24052804347802315
4. Go in to Download Mode and then open up Odin attach the phone then Flash The Noble Root, then Reboot
Then Get the Supersu apk and you Flash that well It is an attached to this OP
and the TWRP if you want it (use Odin and the one I linked to Only) that after it reboots ... If it asks to update the binary su it's ok to do that.
*** One interesting thing I discovered if your TWRP is not recognizing, I found an easy fix is to download the one from the play store Then just open it to allow give it root privileges... then close ...... but do not use the play store version It seems sometimes the phone does not recognize the TWRP that is Odin flashed. This was the Fix I found solved the root recognition issue. Remember, still Only use vol-up/home/pwr method to get into TWRP
Thanks to Manh_IT ... JThrasher47, Charlieb620, Mocsab and any others I forgot to mention in helping us get root... We got it........ :fingers-crossed:
For Those who might want the Arter97 Kernel Here The Link to his thread :
http://forum.xda-developers.com/note5/development/arter97-kernel-galaxy-note-5-t3189907
Here is the Version 4 released today link http://arter97.com/browse/exynos7420/kernel/4.0/n920tw8/
To Those who Want Wanam Exposed Here is the Link ... https://www.androidfilehost.com/?fid=24052804347803128
But Remember... DO NOT FLASH Exposed unless you are on a Deodexed Rom ..... Heed the Warning !
The stock tar essential if you bootloop..... you can then recover by Odin back to stock
Thanks ~~~ oka1
Glad I could help -
Eagerly waiting ROOT - I know it probably won't happen until Source Code is released -that happened in a few weeks on the S6 - not too bad - gives me time to get 'acquainted' with this phone - despite the nay sayers - I really think this is a pretty amazing device. Could it be better? What couldn't! The old SD Card and Removable Battery argument - but I got used to it on the S6 and I won't really miss them here on the Note 5 - MICRO OTG Storage device for backukps - and there are ways to mimic pulling the battery - so there are ways to get around without missing those things too much.
I saw that sammobile has the stock firmware posted already... that's a good sign. I've been hostage to att for soon long, they barely ever post their firmware.
mocsab said:
Glad I could help -
I tried your link and it didn't work for me - here is a new one: ....... Link Fixed-oka1
STOCK FIRMWARE '
Eagerly waiting ROOT - I know it probably won't happen until Source Code is released -that happened in a few weeks on the S6 - not too bad - gives me time to get 'acquainted' with this phone - despite the nay sayers - I really think this is a pretty amazing device. Could it be better? What couldn't! The old SD Card and Removable Battery argument - but I got used to it on the S6 and I won't really miss them here on the Note 5 - MICRO OTG Storage device for backukps - and there are ways to mimic pulling the battery - so there are ways to get around without missing those things too much.
Click to expand...
Click to collapse
Can you please elaborate on the mimicking the battery pull part of your post? Thanks in advance.
Jayy_Suave said:
Can you please elaborate on the mimicking the battery pull part of your post? Thanks in advance.
Click to expand...
Click to collapse
Several different ways to try - not exactly the same as pulling the battery - but the effect is about the same...
1) just hold power until phone turns off - then restart. If that doesn't work go to 2 -
2) Hold Power and Volume Down (takes a few seconds - up to 10 I think) and the device will reset.
3) Hold power, home and volume up - Samsung logo appears - continue to hold - Samsung logo goes black and capacitive buttons flash three times - release - phone goes to recovery - then choose option - reboot or whatever. This is tricky and sometimes It doesn't work for me - timing is everything - if it doesn't work, go to option 4,
4) Hold power, volume down and home, when screen goes dark, switch to volume up, power and home - wait until Samsung logo appears - continue holding - when screen goes dark or when capacitive buttons at bottom of phone flash three times then release - it goes into recovery - then you can reboot -
It is not as easy as pulling the battery - but the effect is the same -
@mocsab- You said using OTG for backups, that works for TWRP? Or do transfer them when needed? TIA.
Sent from my SM-N910T using Xparent Skyblue Tapatalk 2
Warrior1975 said:
@mocsab- You said using OTG for backups, that works for TWRP? Or do transfer them when needed? TIA.
Sent from my SM-N910T using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
Yes, it works great in TWRP - once we get TWRP that is - I used it all the time to create and Store NANDROIDS on - and for other storage that I don't need right away - all the time. It is a great alternative to having an EXT SD Card.
I didn't know that was possible, that's awesome to hear. Relieves a lot of stress for storage. Thank you!!
Sent from my SM-N910T3 using Xparent Skyblue Tapatalk 2
wait is the note 5 rooted already?
any guides? i saw TekHD thread but didn't really get it lol
Not yet...but I'm sure it's coming.
Sent from my SM-N910T3 using Xparent Skyblue Tapatalk 2
Will this root the Canadian version as well? I hope so as the Tmobile one worked for the note 4
The op didn't talk about flashing the kernel? I thought that was the first step?
Cannot D/L the Stock tar firmware..Media Fire deem that it's "Dangerous"
2k13AccdSpt23 said:
Cannot D/L the Stock tar firmware..Media Fire deem that it's "Dangerous"
Click to expand...
Click to collapse
D/L using web browser should not have any issues sounds like you have your protection way restricted ..........
equlizer said:
Will this root the Canadian version as well? I hope so as the Tmobile one worked for the note 4
Click to expand...
Click to collapse
all depends on what build is the Canadian version is, usually you can but you need to check ......... make sure you also have the Stock tar before flashing in case of you need it
gsxcorey said:
The op didn't talk about flashing the kernel? I thought that was the first step?
Click to expand...
Click to collapse
only need this 51 mb patch flashed not the whole kernel
In Odin I get - Boot - Recovery - FAIL - any ideas? After flashing the Noble kernel tar. Phone has some error about something being locked?
Go into settings > developer options > turn on oem unlock
Sent from my SM-N920T using XDA Free mobile app
Hey should I be on 3.10.7 or 3.07...? 3.10 failed and it also looks nothing like your picture. I have AP, BL tabs etc. I know I should have OEM unlocked but should I also have USB debugging checked off? Also, which is the most updated kernel...i see 3 versions. Oh I'm running Windows 10 if that helps. Any help would be appreciated.
3.10.7 or 3.10.6
Sent from my SM-N920T using XDA Free mobile app
Related
Welcome to the Samsung Rugby Pro (SGH-I547) Super Thread
As a continuation of my work on the Rugby Smart I'm pleased to present Rugby Pro super thread. Enjoy and happy hacking.
If you create a support thread related to items in this super or for more generalized help, please PM me as a heads up. I've been doing a lot of work on getting things going for the device and can likely provide some amount of help. Having said that, please create a thread with the problem so everyone can benefit if a solution is found.
Drivers
Samsung_USB_Driver_for_Mobile_Phones_v1.5.14.0.exe
Kies_2.5.0.12114_1_17.exe
Rooting
http://forum.xda-developers.com/showpost.php?p=34463244&postcount=2
Recoveries -- Stock / CWR / TWRP
http://forum.xda-developers.com/showpost.php?p=34463268&postcount=3
Custom Android Builds (ROMs)
http://forum.xda-developers.com/showpost.php?p=34463295&postcount=4
Stock ODIN Images
http://forum.xda-developers.com/showpost.php?p=34463311&postcount=5
Tweaks / Mods
http://forum.xda-developers.com/showpost.php?p=34463338&postcount=6
MotorHead File Mirror
I've published a mirror of requested files from MotorHead: MotorHead files (mirror) . Feel free to PM me with any other files he's published so I can get them mirrored. I may or may not see/mirror them all unless requested.
IRC Channel
There is now an IRC channel to discuss development pertaining to the Rugby Pro. The channel is on freenode at #teamrugby
Rootz Wiki Forum
childrenofthehorn has gotten a dedicated forum setup over at Rootz Wiki. Check it out: http://rootzwiki.com/forum/556-galax...o-development/
TWRP -- Official Status
I got the Rugby Pro accepted as an official TWRP device. Links for goo manager downloads and the like below.
http://teamw.in/project/twrp2/132
http://goo.im/devs/OpenRecovery/comanche
http://techerrata.com/browse/twrp2/comanche
I am not responsible for anything bad that comes to your device when using the information posted in this thread. Everything here is dangerous, may cause a brick, will void a warranty and has the potential to just plain wreak havoc. Do not complain you followed my instructions and met with a dead device. Consider yourself warned
I've tested to the best of my ability, but I am one person with one device, I cannot catch all potential failure modes. If you find a problem and a fix, or have information that should be added let me know and I will update the necessary information.
Big thanks to Dees_Troy for making the SGH-I547 an official TWRP device.
Thanks to childrenofthehorn for help with getting some things up and going
Thanks to motorhead1991
Thanks to utkanos for help with getting CWR and initial partition mappings down
Rooting
Rooting
The below instructions are updated per @newbit on 2015/05/06. Towelroot has been confirmed as broken, disregard any cached / linked instructions about using Towelroot.
Install instructions -- Updated for JB (works with ICS too)
Install drivers from link above
Download necessary packages (CWR or TWRP and Chainfire UPDATE-SuperSU-vx.xx.zip) from the links below
Copy UPDATE-SuperSU-vx.xx.zip to your devices sdcard(s) -- Copy to both if external SD card is present
Charge phone to at least 80%
Power off the phone
Unplug from USB / Charger
Boot into download mode (Home + Volume Down + Power)
When asked if you want to continue, press Volume Up to enter download mode
Plugin phone and
Launch ODIN
Check the checkbox next to "PDA"
Click the PDA button
Select the recovery.tar.md5 file
Make sure only "F. Reset Time" are selected
Make sure "Auto reboot" is not selected
Click start
The progress bar should turn green and say "Pass" -- DO NOT reboot the phone at this point (you may lose recovery if you do)
Unplug the phone from usb
Pop the battery of the phone to power off
Boot into CWR or TWRP (Home + Volume Up + Power -- Release when Samsung logo appears)
Navigate and select the UPDATE-SuperSU-vx.xx.zip over the Install feature
Confirm & Reboot
You should now have root and persistent recovery
Custom NewBit recovery image (used in above procedure)
Root Credits to Chainfire [STABLE][2015.02.13] SuperSU
Below are the current recoveries for the Galaxy Rugby Pro SGH-I547. They are setup to work with the AT&T and Canadian varients.
Some are ODIN images, others are raw img's. The recovery partition is mmcblk0p18
TWRP 2860: comanche_twrp_2860.zip (update.zip --benthecomputerguy93) -- twrp_2860_comanche.img (image -- motorhead1991) -- comanche_i547_TWRP2860.tar.zip (odin - newbit)
CWM 6.0.2.5 Recovery Image (KemoNine): comanche_recovery_cwr_6025.zip (update.zip -- benthecomputerguy93) -- comanche_recovery_cwr_6025.tar.md5 (ODIN) -- comanche_recovery_cwr_6025.img -- KemoNine sources
Stock Recovery Image (ICS): comanche_ucli3_stock_recovery.tar.md5 (ODIN)
CWR Root Update Zip: cwmr_root.zip
CWR Touch
Courtesy of childrenofthehorn there is a now a Clockwork Recovery Touch and ODIN images for the ATT varient. The thread is: http://forum.xda-developers.com/showthread.php?t=1990519
Custom Android Builds (ROMs)
Sources (used for various ROM builds)
GitHub - Team Rugby
Current Builds / ROMs
Motorhead1991 has graciously continued work where KemoNine left off and has published CyanogenMod, Exodus, and Validus builds for the Rugby Pro. The files can be obtained from one of the two mirrors below.
Motorhead Mirror: http://developer-aa51.com/
KemoNine Mirror: https://nuskunetworks.box.com/s/3bmn9o1krpqxaxkfrxrfo0k1lq2olqjr
Old ROMs (NO longer maintained)
CyanogenMod 10 is available but no longer maintained for the Samsung Rugby Pro. Thread with instructions / downloads / support: http://forum.xda-developers.com/showthread.php?t=2067214
Stock ODIN Images
Below are a variety of ODIN images that will let you reset a device back to stock.
Please be mindful of the varient. Not all ODIN images will work on all devices. There are AT&T and Canadian images provided.
SamMobile (Thanks @newbit for getting them to post this)
SamMobile SGH-I547 firmware images
ICS AT&T (Courtesy of childrenofthehorn): childrenofthehorn_Stock_ATT_comanche_i547_ICS.tar.md5.7z
ICS AT&T (KemoNine): comanche_ucli3_stock_boot_recovery_system.tar.md5.gz
JellyBean AT&T (KemoNine Kies Rip): I547UCBLL1_I547ATTBLL1_I547UCBLL1_HOME.tar.md5.gz
AT&T UCCMF2 Baseband update.zip (KemoNine OTA Rip): cwr_modem_uccmf2.zip This is ONLY for AT&T devices, it will break the modem on the Canadian variants
AT&T UCCMH5 Update (KemoNine Kies Rip):
ODIN_UCCMH5_Complete.tar.md5 (ODIN) This is ONLY for At&T devices, it will brick Canadian devices. This update does NOT include a data wipe. You'll need to wipe data if using this as a restore option.
AT&T UCCMH5 Baseband update.zip (KemoNine OTA Rip):
cwr_modem_uccmh5.zipThis is ONLY for AT&T devices, it will break the modem on the Canadian variants
Tweaks / Mods
WiFi Tethering Enable (JB - 4.1.2 Advanced users):
Thanks cyberhunter
http://forum.xda-developers.com/showpost.php?p=43573049&postcount=335
WiFi Tethering Enable (JB - 4.1.1 Advanced users):
Thanks zach.xtr
http://forum.xda-developers.com/showpost.php?p=37668101&postcount=144
WiFi Tethering Enable (ICS Advanced users):
Thanks XtremeAdventure
Prebuilt binary for tethering
Mirror 1: framework-res.apk
Mirror 2: framework-res.apk
Details / Instructions
http://forum.xda-developers.com/showpost.php?p=36159120&postcount=74
Excellent work buddy, this should hopefully kick things off
sent from Rugby LTE
Patiently waiting.......
So I am still having problems with no wifi and losing root with my custom rom, everything else works though
Sent from my SGH-I547C using xda premium
markdexter said:
So I am still having problems with no wifi and losing root with my custom rom, everything else works though
Sent from my SGH-I547C using xda premium
Click to expand...
Click to collapse
Are you working on a customized stock rom or a build of Cyanogen?
Customized stock rom
Sent from my SGH-I547C using xda premium
Remember if either of you need a tester......? Let me know..
markdexter said:
Customized stock rom
Sent from my SGH-I547C using xda premium
Click to expand...
Click to collapse
Very nice, I've managed to make some progress on Cyanogen but there are some tweaks left to be made. If you need any hosting please PM me, I've got a pretty good setup for mirroring going.
For your wifi issue: did you build your own kernel?
No, just stock kernel for now
Sent from my SGH-I547C using xda premium
markdexter said:
No, just stock kernel for now
Sent from my SGH-I547C using xda premium
Click to expand...
Click to collapse
Stock boot image or tweaked?
kemonine96 said:
Stock boot image or tweaked?
Click to expand...
Click to collapse
I ran it through dsixdas kitchen, I've tried with tweaked boot.img and then I pulled the boot. Img from the official rom with the same results
Sent from my SGH-I547C using xda premium
markdexter said:
I ran it through dsixdas kitchen, I've tried with tweaked boot.img and then I pulled the boot. Img from the official rom with the same results
Sent from my SGH-I547C using xda premium
Click to expand...
Click to collapse
I can take a look at it if you like. PM me with some of the details and we can go from there.
Sent from my SAMSUNG-SGH-I547 using Tapatalk 2
here is the boot.img that im trying to use
I think the only thing screwing me is my updater script, getting a status 7 error when it comes to flashing the boot. Img
Sent from my SGH-I547C using xda premium
markdexter said:
I think the only thing screwing me is my updater script, getting a status 7 error when it comes to flashing the boot. Img
Sent from my SGH-I547C using xda premium
Click to expand...
Click to collapse
That could be it. Can you post the updater script?
Also, checkout the update.zip below. If you poke through the zip it will show you some tricks on how to write an img file out to a raw partition. The update is something another dev and I put together for updating the modem of a device. Works the same as the boot.img.
http://goo.im/devs/kemonine/apache/modem/apache_modem_ucla4.zip
[GUIDE] ROOT + OTA & KIES Updates + OFFICIAL Device Status (XXUGNF1) [GT-I9500/I9505]
Hello everyone
I have found SOLUTION for ALL people who USED or want to USE a Chainfire's CF-AutoRoot for GT-I9500/I9505
This method will reset Device Status back to OFFICIAL and keep Full Root Access.
A little gift for everyone who like to listen to good tunes while flashing...
one my latest productions...
Download:
DjeMBeY - EuPhorY [Original MiX]
for more tunes, please check my signature..
Take it easy and keep it LOUD!!! ;
enjoY!!
19.06.2014
==========
Latest news......
Please use TowelRoot for rooting your I9505 and keeping KNOX at 0x0!!
It's an APP, no need for PC/Laptop and it's One-Click-Root app!!
Tested on I9505XXUGNF1!!
enjoy!!
Works on both models and ALL Firmwares!!! - TESTED
I DON'T take any responsibility for HUMAN ERRORS....
Follow the GUIDE and it WILL work, if NOT, it's because YOU are doing something wrong...
I - How to Root: GT-I9500/I9505Flashing instructions:
Use one of the Pre-Rooted Official ROM's and keep it clean from the beginning... or
1. Install KIES or USB drivers from here
2. Download and run Odin from here (v.3.04 is recomended)
3. Make sure that ONLY AutoReboot & F.Reset Time is ticked in Odin options
4. Download and extract CF-AutoRoot: CF-AR for GT-I9500 or CF-AR for GT-I9505
5. Load extracted file (.tar.MD5) as PDA in Odin.
6. Turn OFF your phone, Press&Hold POWER+HOME+VOL_DOWN buttons until phone boot into Download/Odin Mode
7. Connect phone to the computer and WAIT for the drivers to be installed. You will see blue or yellow indicator in left top corner of Odin, with phone connected to port: COM:x
8. Click START and wait until you see GREEN indicator [PASS], flashing is finished
9. Unplug the cable and WAIT, phone will reboot into recovery with RED ANDROID LOGO where root will be applied and Stock Recovery restored.
10. Test it please, go to APPS and look for SuperSU.apk, if it's NOT there, install it from PlayStore and enjoy!!
II - How to reset Binary Counter and Device Status back to OFFICIAL:Install and run Chainfire's TRIANGLE AWAY (I9505 ONLY, I9500 is NOT SUPPORTED YET)
NOTE: There is an option "System modified workaround", please tick this and restart your phone. Device Status should be back to OFFICIAL!! Use it with caution!!
Next few steps are ONLY for people who couldn't reset it with Triangle Away...
1. Reboot into Download Mode and check if Binary & System are OFFICIAL.
2. Only if the BINARY Status is still Custom, download and extract OFFICIAL STATUS MOD(.tar.md5): GT-I9500 or GT-I9505 - open in Odin as PDA (password: djembey2013)
3. Use Wanam Xposed and tick "Fake System Status" to get Official Device/System status
Your Device Status will be back to OFFICIAL and FULLY ROOTED, NO REBOOTS, TESTED!!!
Fully Working OTA and KIES updates!!
FIY: Root will be lost after OFFICIAL updates.
I've also managed successfully pre-root and rebuild OFFICIAL ROM for GT-I9505
It is fully working, no issues at all!!
For Download and more info please visit my thread in Development Section http://forum.xda-developers.com/showthread.php?t=2250824
Junior members are not allowed to post in Development Section so please post ALL your questions and issues here
Enjoy!!
If you find my threads HELPFUL, please click THANKS or get me a coffee by clicking DONATE
It mean a LOT to me and it's always Appreciated!!!
CREDITS
Chainfire
SamMobile
Samsung-Updates
So it's a complete stock rom? That's awesome! But i've gotta wait for others to risk their phones before I take the plunge myself...
Denomenance said:
So it's a complete stock rom? That's awesome! But i've gotta wait for others to risk their phones before I take the plunge myself...
Click to expand...
Click to collapse
There's NO RISK!!! FULLY TESTED on my GT-I9505!
It's as Official as it can be!!
enjoy!
OP updated,
Modified version is online,
HD VOICE enabled, latest modem added (XXUAMDM), MultiCSC,
FULLY TESTED
enjoy!
I'll test it out when i get home tonight i can't live without root so ill better flash it Strait out of the box which i will Thanks for the rom!
Sammath said:
I'll test it out when i get home tonight i can't live without root so ill better flash it Strait out of the box which i will Thanks for the rom!
Click to expand...
Click to collapse
Every other person on XDA should have a nickname RootManiac
It's stable and Official. Only one thing is weird, if you try to set "write permissions" to the "system" in file manager, the phone won't let you do it and it'll reboot automatically... New SEAndroid feature...
Other than that, ALL OK, I'm using quite few apps with root access and all of them works fine, including restoring apps and data..
enjoy and report any issues
Sorry, but what does this do, does it root your device?
If you do this you don't have to do CF-Auto-Root?
Or, just when necessary, revert back to stock ROM?
And can someone explain to me what's Odin? I came from One XL.
After doing this, you still have to use CF-Auto-Root right?
Because this isn't permanent is it? Meaning you can't flash other ROMs etc unless you do CF Auto-Root?
Deleted
Aerodeath said:
Sorry, but what does this do, does it root your device?
If you do this you don't have to do CF-Auto-Root?
Or, just when necessary, revert back to stock ROM?
And can someone explain to me what's Odin? I came from One XL.
After doing this, you still have to use CF-Auto-Root right?
Because this isn't permanent is it? Meaning you can't flash other ROMs etc unless you do CF Auto-Root?
Click to expand...
Click to collapse
Read a little bit and then come back
Sent from my GT-I9505
LATEST NEWS!!!!!!
FULLY ROOTED XXUAMDM with CF-AutoRoot!!! (CREDIT TO CHAINFIRE)
FULL ACCESS TO SYSTEM
SYSTEM STATUS - OFFICIAL
NO REBOOTS
STABLE AS ROCK
FULLY WORKING!!!
CSC included as separate, Odin flashable file
Online!!!
djembey said:
LATEST NEWS!!!!!!
FULLY ROOTED XXUAMDM with CF-AutoRoot!!! (CREDIT TO CHAINFIRE)
FULL ACCESS TO SYSTEM
SYSTEM STATUS - CUSTOM!!!
NO REBOOTS
STABLE AS ROCK
NO ERRORS (sometimes Warning message pop up, but it doesn't block anything)
FULLY WORKING!!!
NO CSC included, in some cases APN settings need to be re-set manually
UPLOADING!!!
Click to expand...
Click to collapse
Hi
Just wondering will it work on i9505 xuamdf?
Sent from my XT890 using xda app-developers app
Hi, thanks for this, but I've seen that you just posted German and UK versions, I'm from Spain, I could use for example the UK Rom?
Thanks!
EDIT: Solved XD I now understand that I just need to change the CSC to my region... With the app you said, or by using the Command: *#272*IMEI# so that you can do it manually from the phone without the need of the up, I tried it now and works perfectly thanks again! (You could put the info of the command in your first post, someone might want to know it!)
OP updated
Fully Rooted XXUAMDM is Online!!
enjoy and report
topcat07 said:
Hi
Just wondering will it work on i9505 xuamdf?
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
I'ld like to know too as I have i9505xxuamdf
Thanks but cf root worked fine for my unbranded i9505. For those who dont want to re do rom cf is fine
Sent from my GT-I9505 using xda app-developers app
btemtd said:
Thanks but cf root worked fine for my unbranded i9505. For those who dont want to re do rom cf is fine
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
You CAN'T root latest XXUAMDM build with CF just like that.... It DOESN'T WORK. .
That is why I have rebuilt it.
Sent from my GT-I9505
Thread Renamed, OP updated!
All things FULLY TESTED!!
Works like a charm Root + Official.
Thanks
Uploading new HYBRID ROM
Latest PDA- XXUAMDN
Latest modem - MDN
Fully Rooted
Sent from my GT-I9505 using xda app-developers app
hU Djembey, YOUR MOD worked to root my UAMDM fRENCH Galaxy S4 , but I have a annoying message :" please reboot your device, ... non autorised application detected...."
So I recently bricked my tab3 and I could not figure out anything or find anything to do the unbrick in ODIN. I thought that I would share what I found so it can be easily located for a user in the future.
This is going to restore your tablet back to STOCK 4.2.2. This is the most recent version provided by samsung.
YOUR GOING TO NEED DRIVERS INSTALLED!!
THIS FIRMWARE IS FOR THE P5210 MODEL ONLY! IF YOU HAVE P5200 OR P5220 YOU NEED YOUR OWN FIRMWARE! I will be adding them to my MEGA account soon.
1. Download this file:
https://mega.co.nz/#!7BQkCQrT!hdJXKXTVZe_Rx63CYE3xPESxxNr9FWqgGQgmOz1DH3A
Mirror: http://www.androidfilehost.com/?fid=23311191640113436
(I have hosted it on MY MEGA account so that no one has to go through the crap I did to get the file. The mirror is courtesy of @r_hippy)
2. Download ODIN:
https://mega.co.nz/#!fJRkzTQL!uUN3LLhSCXIHtEFUlUDyPdf48rgEXj1wh5mgV5q8TkU
(Also my MEGA, for convenience, if you want to find it somewhere else then fine)
3.DO NOT CHANGE THE .MD5 TO .TAR! Flash in ODIN as a normal .md5 file.
3a. Extract and open ODIN.
b. Extract firmware.zip
c. Put tablet into download mode. [Hold power and vol down until text shows, then press vol up]
d. Place firmware into PDA section, and wait to verify. When finished click START at the bottom.
You have successfully just unbricked and unrooted your tablet. For root again follow this guide:
http://true-android.blogspot.com/2013/12/root-p5200xxuamk8-android-422-jb.html
But use this root.zip
http://roms.bindroid.com/downloads/viewcategory/7-root
Sent from my GT-P5210 using xda app-developers app
The links have been suspended on my dropbox account for excessive traffic. Apparently from what im reading that means ive exceeded 20GB of bandwidth in one day. These links have only been posted for about two days so I'm glad I could help so many people. Im going to repost these links in a public folder and put new links up in a bit. Thanks guys!
Sent from my GT-P5210 using xda app-developers app
I had a problem with not getting into download mode. tablet would not do anything. luckily i have a micro USB jig plunged it in hit power button only and right into download mode well worth the 5 bucks!!
sorry didn't mention my model #, I have a GT-P5210
shinglers said:
I had a problem with not getting into download mode. tablet would not do anything. luckily i have a micro USB jig plunged it in hit power button only and right into download mode well worth the 5 bucks!!
Click to expand...
Click to collapse
You should not have problem with Download mode!! That is wierd.
In any case Thanks for report on the use of the JIG. It nice to hear that it works in our devices. I have GT-P5210. But you never mention What is yours?
dale_para_bajo said:
You should not have problem with Download mode!! That is wierd.
In any case Thanks for report on the use of the JIG. It nice to hear that it works in our devices. I have GT-P5210. But you never mention What is yours?
Click to expand...
Click to collapse
sorry you got me before I edited my post.....I have a GT-P5210
I've also noticed when going back to stock or installing any ROM for that matter I have to do a factory reset otherwise I'm stuck in a boot loop.
Sent from my GT-P5210 using XDA Premium 4 mobile app
Zachisimo said:
So I recently bricked my tab3 and I could not figure out anything or find anything to do the unbrick in ODIN. I thought that I would share what I found so it can be easily located for a user in the future.
This is going to restore your tablet back to STOCK 4.2.2. This is the most recent version provided by samsung.
YOUR GOUNG TO NEED DRIVDRS INSTALLED!!
1. Download this file:
https://www.dropbox.com/s/z40rr9rti7iqgtq/P5210UEUAMK1_P5210XARAMK1_XAR.zip
(I have hosted it on MY dropbox account so that no one has to go through the crap I did to get the file.)
2. Download ODIN:
https://www.dropbox.com/s/dw3mbnwi2hk16xm/Odin307.zip
(Also my dropbox, for convenience, if you want to find it somewhere else then fine)
3.DO NOT CHANGE THE .MD5 TO .TAR! Flash in ODIN as a normal .md5 file.
3a. Extract and open ODIN.
b. Extract firmware.zip
c. Put tablet into download mode. [Hold power and vol down until text shows, then press vol up]
d. Place firmware into PDA section, and wait to verify. When finished click START at the bottom.
You have successfully just unbricked and unrooted your tablet. For root again follow this guide:
http://true-android.blogspot.com/2013/12/root-p5200xxuamk8-android-422-jb.html
But use this root.zip
http://roms.bindroid.com/downloads/viewcategory/7-root
Sent from my GT-P5210 using xda app-developers app
Click to expand...
Click to collapse
Was that the USA version, factory odin IMG?
The Dropbox link is dead!
I would like to grab this thanks
Sent from my GT-P5210 using Tapatalk
r_hippy said:
Was that the USA version, factory odin IMG?
The Dropbox link is dead!
I would like to grab this thanks
Sent from my GT-P5210 using Tapatalk
Click to expand...
Click to collapse
Pm me I'll give you a link. I would post it here but it's my Dropbox and I don't want to get shut off
Sent from my GT-P5210 using XDA Premium 4 mobile app
r_hippy said:
Was that the USA version, factory odin IMG?
The Dropbox link is dead!
I would like to grab this thanks
Sent from my GT-P5210 using Tapatalk
Click to expand...
Click to collapse
Yes it is the USA version. I need to find out what is wrong with the links. My dropbox traffic got me kicked off. Im going to look for another site maybe
Sent from my GT-P5210
I will be posting MEGA links as soon as I can transfer the files from dropbox
Sent from my GT-P5210
Zachisimo said:
I will be posting MEGA links as soon as I can transfer the files from dropbox
Sent from my GT-P5210
Click to expand...
Click to collapse
I can host it if you like .. I just need to get it some how..
pm me if you need
r_hippy said:
I can host it if you like .. I just need to get it some how..
pm me if you need
Click to expand...
Click to collapse
Links updated
Sent from my GT-P5210
Thanks.. Very slow site.. But much appreciated
For those interested.
I have something cooking in the kitchen for this beast.. MK1
Sent from my SCH-I545 using Tapatalk
Zachisimo said:
Links updated
Sent from my GT-P5210
Click to expand...
Click to collapse
Here's a mirror just incase
md5: a9a11c63abf15386ab6105510c37d1fa
url: http://www.androidfilehost.com/?fid=23311191640113436
You can add it to the op.
Thanks again.
Sent from my GT-P5210 using Tapatalk
nothing seem to be changed.
Thanks Zachisimo,
I followed the steps to a "T" and after I flashed my Tab 3, 10.1 nothing seem to be changed.
I have a working tablet but nothing was changed to factory default.
All that I had checked was the Auto Reboot & Reset Time option.
I will re-flash this rom via Odin, Again...
Should I had checked the Re-Partition Option?
Thanks in advance for getting me this far :good:
serendipityguy said:
Thanks Zachisimo,
I followed the steps to a "T" and after I flashed my Tab 3, 10.1 nothing seem to be changed.
I have a working tablet but nothing was changed to factory default.
All that I had checked was the Auto Reboot & Reset Time option.
I will re-flash this rom via Odin, Again...
Should I had checked the Re-Partition Option?
Thanks in advance for getting me this far :good:
Click to expand...
Click to collapse
Does the tablet turn on and boot up?
Sent from my GT-P5210
Weird, I dont know why I am not getting factory default.
Zachisimo said:
Does the tablet turn on and boot up?
Sent from my GT-P5210
Click to expand...
Click to collapse
Oh yes, I never had a problem with that.
I problem was not getting the correct TWRP 2.7 installed so that I could flash a rom.
I was able to use TWRP 2.6.1 that still remained even after I Odin the stock rom twice, to flash Super User but I could not flash a larger zip like the Crash Rom or Infamous Rom on this tablet.
Weird, I dont know why I am not getting factory default.
What do I do to get back to factory . . .
serendipityguy said:
Oh yes, I never had a problem with that.
I problem was not getting the correct TWRP 2.7 installed so that I could flash a rom.
I was able to use TWRP 2.6.1 that still remained even after I Odin the stock rom twice, to flash Super User but I could not flash a larger zip like the Crash Rom or Infamous Rom on this tablet.
Weird, I dont know why I am not getting factory default.
What do I do to get back to factory . . .
Click to expand...
Click to collapse
It doesnt look like those roms are available for this tablet. But flashing my ODIN files should make your tablet 100% factory again
Sent from my GT-P5210
not achieved stock after 3 attempts at flashing Odin with the said stock rom and Odin
Zachisimo said:
It doesnt look like those roms are available for this tablet. But flashing my ODIN files should make your tablet 100% factory again
Sent from my GT-P5210
Click to expand...
Click to collapse
Doily noted Zachisimo, but I have not achieved stock after 3 attempts at flashing Odin with the said stock rom and Odin.
I have the same working rom with a recovery that I want to change and cant.
Even after I Odin the rom, I do get stock recovery back. but no factory default
I Odin the TWRP 2.7 and later reboot into TWRP, I get the TWRP 2.6.1
Something gotta give....
serendipityguy said:
Doily noted Zachisimo, but I have not achieved stock after 3 attempts at flashing Odin with the said stock rom and Odin.
I have the same working rom with a recovery that I want to change and cant.
Even after I Odin the rom, I do get stock recovery back. but no factory default
I Odin the TWRP 2.7 and later reboot into TWRP, I get the TWRP 2.6.1
Something gotta give....
Click to expand...
Click to collapse
Try flashing this https://mega.co.nz/#!TMRVlIza!1WSt-u2jCc4zhUcgQZk2Z3ihLwzUAVtbQweZKW3D2Ck
Sent from my GT-P5210
Good day everyone,
This (was) my first thread here. I am trying to make a single package that'll turn a boring, unrooted KitKat Grand 2 into a rooted S5.
I'm done collecting the apps. The flashable ZIP is being uploaded.
Currently, there's my root guide for the KitKat Grand 2 Samsung ROM.
1. Download CWM beta (link added below)
2. Download SuperSU (link added below)
3. Flash that through CWM.
4. Rooted.
EDIT:
Link to SuperSU flashable ZIP package: http://download.chainfire.eu/381/SuperSU/UPDATE-SuperSU-v1.91.zip
Link to CWM (KitKat only): https://mega.co.nz/#!UR5j1AAQ!RHCy_MudMz48TJ3S1-jkfVQgeUDUBr-Io-sIBhG5EOc
Another link to CWM:
http://d-h.st/JgL
<B>STEP 1</B>: S5 notification panel and quick settings with circles
a. Download the flashable ZIP from the attachments.
b. Flash that through CWM.
c. Enjoy!
There's evidence in the last picture (attachment)
The quality is too low because I was using my laptop's webcam (phone won't let me take a screenshot of the notification panel).
THIS MOD IS OBSOLETE. USE MY NEW MOD:
http://forum.xda-developers.com/galaxy-grand-2/themes-apps/ultimate-s5-mod-one-stop-s5-mod-t2846377
-----------------------------------------------------------------------------------------
<B>STEP 2:</B> S5 Apps.
S5 Email, AccuWeather widget, and other apps:
http://forum.xda-developers.com/gal...5-settings-accuweather-email-s5-apps-t2829221
S Note:
http://forum.xda-developers.com/galaxy-grand-2/themes-apps/real-4-4-s-note-100-t2828107
Tested and verified on my Grand 2 SM-G7102, but works on any variant of the Grand 2, if rooted and upgraded to KitKat.
Detailed (as in "noob-friendly") instructions , screenshots, and links coming soon.
Sources:
Recovery-http://forum.xda-developers.com/showthread.php?t=2794016
SuperSU-www.chainfire.eu
thanks
thanks for your appreciation in grand 2
we are waiting for this for a very long time:good:
Plz mention link....simply
Sent from my SM-G7102 using XDA Premium 4 mobile app
WaseemAlkurdi said:
Good day everyone,
This is my first thread here. I am trying to make a single package that'll turn a boring, unrooted KitKat Grand 2 into a rooted S5.
I'm currently collecting the apps. Stay tuned for more details (project will be done soon - no more than a month)
Currently, there's my root guide for the KitKat Grand 2 Samsung ROM.
1. Download CWM beta (link added below)
2. Download SuperSU (link added below)
3. Flash that through CWM.
4. Rooted.
EDIT:
Link to SuperSU flashable ZIP package: (http)download(dot)chainfire(dot)eu/381/SuperSU/UPDATE-SuperSU-v1.91(dot)zip
Link to CWM (KitKat only): (https)mega(dot)co(dot)nz/#!UR5j1AAQ!RHCy_MudMz48TJ3S1-jkfVQgeUDUBr-Io-sIBhG5EOc
Because I'm still new, I am not allowed to add links. But I ain't a spammer! XDA's automation thinks that!
Replace:
(http) with http: and two backslashes.
(https) with https: and two backslashes.
(dot) with a dot ( . )
Click to expand...
Click to collapse
http://download.chainfire.eu/381/SuperSU/UPDATE-SuperSU-v1.91.zip
https://mega.co.nz/#!UR5j1AAQ!RHCy_MudMz48TJ3S1-jkfVQgeUDUBr-Io-sIBhG5EOc
schubeir
jeetujaan said:
Plz mention link....simply
Sent from my SM-G7102 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
XDA won't allow me cuz I'm still new!
change the link
mega.co.nz is not opening as the server is down please could u give another link to it thanks a lot
schubeir said:
http://download.chainfire.eu/381/SuperSU/UPDATE-SuperSU-v1.91.zip
https://mega.co.nz/#!UR5j1AAQ!RHCy_MudMz48TJ3S1-jkfVQgeUDUBr-Io-sIBhG5EOc
schubeir
Click to expand...
Click to collapse
mega.co.nz not working..
PKothavale said:
mega.co.nz not working..
Click to expand...
Click to collapse
Link fixed.
shashank281295 said:
mega.co.nz is not opening as the server is down please could u give another link to it thanks a lot
Click to expand...
Click to collapse
You're welcome. Another link added.
CWM
Thanks for link tried installing cwm through odin but after flashing and rebooting to recovery again stock comes tried manual reboot also after taking battery out no luck
shashank281295 said:
Thanks for link tried installing cwm through odin but after flashing and rebooting to recovery again stock comes tried manual reboot also after taking battery out no luck
Click to expand...
Click to collapse
Did you:
- make sure that your phone is on KitKat?
- try another cable and/or PC and/or USB port?
- try redownloading CWM?
If all fails, please tell me.
Ya bro i tried download twice all went ok odin showed reset but as soon as i boot in recovery then stock recovery flashed again automatically and yes it is 4.4.2 kitkat tried almost 10 times to flash but all in vain
shashank281295 said:
Ya bro i tried download twice all went ok odin showed reset but as soon as i boot in recovery then stock recovery flashed again automatically and yes it is 4.4.2 kitkat tried almost 10 times to flash but all in vain
Click to expand...
Click to collapse
So, did you flash while having enabled Debugging Mode? (Tap the Build Number seven times in About Device, go back, tap Developer Options, and turn on USB Debugging). Also try disabling it if you had it enabled.
If this doesn't work, try flashing with Auto Reboot turned off in Odin, then manually rebooting after you become absolutely sure the process is over.
If both solutions don't work, tell me.
Tried again back to stock i think because Qualcomm secureboot is enabled it thr a way to disable it
shashank281295 said:
Tried again back to stock i think because Qualcomm secureboot is enabled it thr a way to disable it
Click to expand...
Click to collapse
That has no effect on installing CWM, because I got Secureboot enabled, too, while having CWM.
First, do you have a red line saying UDC START in Download Mode?
Second, do you mean (by saying stock) getting in Download Mode again with an extra line saying "Could not do normal boot" OR getting a screen with "Android system recovery (3e)" on the top?
And did my other solutions (toggling Debugging Mode, disabling Auto Reboot) fail?
If so, tell me. Concentrate on what you mean by "stock".
I got one last solution working, but it needs you to tell me what do you mean by stock.
ODIN MODE
PRODUCT NAME: SM-G7102
CURRENT BINARY-CUSTOM
SYSTEM STATUS-CUSTOM
QUALCOMM SECUREBOOT ENABLE(CSB)
AP SWREV S1 T1 A1 A2 P1
UDC START
everytime this is only coming
shashank281295 said:
ODIN MODE
PRODUCT NAME: SM-G7102
CURRENT BINARY-CUSTOM
SYSTEM STATUS-CUSTOM
QUALCOMM SECUREBOOT ENABLE(CSB)
AP SWREV S1 T1 A1 A2 P1
UDC START
everytime this is only coming
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2794016
This is the thread of that CWM recovery. Ask your question there, because your condition is a rare one. Thanks.
Does it work on G8 ? I'm using that
Sent from my SM-G7102 using XDA Free mobile app
thanhdatnguyen said:
Does it work on G8 ? I'm using that
Sent from my SM-G7102 using XDA Free mobile app
Click to expand...
Click to collapse
Should eork on any 4.4.2 firmware (recovery) and any firmware (SuperSU)
i had the same of your problem (my solution)
shashank281295 said:
ODIN MODE
PRODUCT NAME: SM-G7102
CURRENT BINARY-CUSTOM
SYSTEM STATUS-CUSTOM
QUALCOMM SECUREBOOT ENABLE(CSB)
AP SWREV S1 T1 A1 A2 P1
UDC START
everytime this is only coming
Click to expand...
Click to collapse
try to flash it with pc, plug it into your rear side usb (not front or usb extention or else)
try with just only your samsung cable (unplug the other cable that connected to your pc)
thats work for me ... it might work for yours
any how plz hit thx button if you dont mind :fingers-crossed:
In case you didnt know the Sprint version of the S6 Edge root is available thanks to ChainFire's CF-Auto-Root. See the following thread:
http://forum.xda-developers.com/galaxy-s6-edge/orig-development/cf-auto-root-t3056631
Our phone isn't in the list on ChainFire website, but the download for the T-Mobile S6 works on our phone. Here is the link to the required file.
http://download.chainfire.eu/731/CF-Root/CF-Auto-Root/CF-Auto-Root-zerofltetmo-zerofltetmo-smg920t.zip
USB Drivers:
http://www.samsung.com/us/support/owners/product/SM-G925PZDFSPR#
How to root Sprint Samsung Galaxy S6 Edge SM-G925P using CF-Auto-Root
Step-1: Extract the downloaded root package on your PC to get a file with .tar.md5 extension
Step-2: Ensure that Galaxy S6 Edge USB drivers are installed on the computer
Step-3: Switch off the Galaxy S6 Edge and enter download mode by holding the Home, Power and Volume Down buttons together for a few seconds. If it asks you to press any button to continue the process then press the particular button
Step-4: Launch Odin on the computer (located in the above zip file)
Step-5: Connect your S6 to the computer using USB cable while it is in Download mode. When the phone is connected successfully, Odin will display an Added message
Step-6: In Odin click the AP button and select the .tar.md5 file that was extracted in step-1
Step-7: Double check everything and hit the Start button in Odin
Step-8: The installation process will now begin. It will take a few minutes. When the installation process is completed, the phone will reboot
Step-9: You can safely unplug the phone from the computer once the home screen shows up
Custom Recovery is now available, see the following thread:
http://forum.xda-developers.com/sprint-galaxy-s6-edge/general/recovery-twrp-2-8-6-0-touch-recovery-t3102034
I asked in the CF thread if we had to unlock our bootloader and someone said they didn't. That true?
rank78 said:
I asked in the CF thread if we had to unlock our bootloader and someone said they didn't. That true?
Click to expand...
Click to collapse
It's already unlocked, just follow the instructions above and you'll be good.
Already unlocked bootloader is a first for me :laugh:
This is excellent news, Root already being available & so easy.
Sent from my Nexus 5 using Tapatalk
optimummind said:
This is excellent news, Root already being available & so easy.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Beware. Read the posts in Chainfires thread about the phone not going into deep sleep.
I am now in that boat. Phone is not going into deep sleep and battery discharges extremely fast.
Still trying to find a way to fix it. I currently have to put my phone on the charger several times a day.
fgr said:
Beware. Read the posts in Chainfires thread about the phone not going into deep sleep.
I am now in that boat. Phone is not going into deep sleep and battery discharges extremely fast.
Still trying to find a way to fix it. I currently have to put my phone on the charger several times a day.
Click to expand...
Click to collapse
That's certainly bad news. Hope all can be resolved soon. Is there a tar file available yet that you can flash to go back to stock?
Sent from my SPH-L720
optimummind said:
That's certainly bad news. Hope all can be resolved soon. Is there a tar file available yet that you can flash to go back to stock?
Sent from my SPH-L720
Click to expand...
Click to collapse
Nope. That's what I'm waiting on. Hopefully Sammy doesn't make us wait too long. Not too big of a deal for me, I have easy access to chargers all day (plus the quick charge feature is really nice).
You may want to try an app like Battery Booster to increase battery life. Doing a test with it now, will report my finding tomorrow. You can always unroot the phone via the settings in SuperSU
What would be the point of rooting right now?
Same sentiments as I'm saying. Especially with the issue of battery. Just wait patiently until all the kinks are out.
Sent from my SM-G925P using XDA Free mobile app
What software are yall rooting it on?I haven't updated the os just to be safe for one but I wonder if that makes a difference with the battery drain. Also did anyone change the recovery image in cfroot zip?
cruckus said:
What software are yall rooting it on?I haven't updated the os just to be safe for one but I wonder if that makes a difference with the battery drain. Also did anyone change the recovery image in cfroot zip?
Click to expand...
Click to collapse
I heard the fix for the drain problem is to reflash the stock recovery after you achieve root, but since the firmware is not available for the phone to pull out the recovery.img file to reflash it with odin its a mote point for now. Some other Samsung S6 Edge fourm are saying it maybe a bug in Lollipop and a way to fix it is by turning off Wifi
dhonzik said:
I heard the fix for the drain problem is to reflash the stock recovery after you achieve root, but since the firmware is not available for the phone to pull out the recovery.img file to reflash it with odin its a mote point for now. Some other Samsung S6 Edge fourm are saying it maybe a bug in Lollipop and a way to fix it is by turning off Wifi
Click to expand...
Click to collapse
Yea I wasn't sure if using the recovery.img from another model would work assuming the recovery was the same for all models. But if turning off WiFi is the answer that's a pretty do able thing for root and WiFi hotspot.
Excellent post OP and thanks for the disclaimers
---------- Post added at 02:59 PM ---------- Previous post was at 02:55 PM ----------
defjef123 said:
What would be the point of rooting right now?
Click to expand...
Click to collapse
For me it's to get rid of the Samsung bloat and install AdAway
Any news on tripping Knox fubaring stuff like Samsung pay?
Knox will be tripped therefor supposedly Samsung pay will not work when it becomes available....has anyone gotten wifi tether to work yet? It appears that sprint locked down apn changing but wifi tethering works on a rooted T-Mobile.
Data wiped during root process?
Does this wipe data? Also, I had to encrypt my phone to use my work email.
dhonzik said:
In case you didnt know the Sprint version of the S6 Edge root is available thanks to ChainFire's CF-Auto-Root. See the following thread:
http://forum.xda-developers.com/galaxy-s6-edge/orig-development/cf-auto-root-t3056631
Our phone isn't in the list on ChainFire website, but the download for the T-Mobile S6 works on our phone. Here is the link to the required file.
http://download.chainfire.eu/731/CF-Root/CF-Auto-Root/CF-Auto-Root-zerofltetmo-zerofltetmo-smg920t.zip
USB Drivers:
http://www.samsung.com/us/support/owners/product/SM-G925PZDFSPR#
How to root Sprint Samsung Galaxy S6 Edge SM-G925P using CF-Auto-Root
Step-1: Extract the downloaded root package on your PC to get a file with .tar.md5 extension
Step-2: Ensure that Galaxy S6 Edge USB drivers are installed on the computer
Step-3: Switch off the Galaxy S6 Edge and enter download mode by holding the Home, Power and Volume Down buttons together for a few seconds. If it asks you to press any button to continue the process then press the particular button
Step-4: Launch Odin on the computer (located in the above zip file)
Step-5: Connect your S6 to the computer using USB cable while it is in Download mode. When the phone is connected successfully, Odin will display an Added message
Step-6: In Odin click the AP button and select the .tar.md5 file that was extracted in step-1
Step-7: Double check everything and hit the Start button in Odin
Step-8: The installation process will now begin. It will take a few minutes. When the installation process is completed, the phone will reboot
Step-9: You can safely unplug the phone from the computer once the home screen shows up
EDIT: If you choose to root your phone its been reported that the phone doesn't enter deep sleep mode, but I had found before I rooted the battery life wasn't as great as my LG G3. You may want to activate battery saving mode to see if that fixes the problem or use a app like Battery Booster.
WARNING: Since we are using the file for the T-Mobile and you do achieve root with it, you lose the ability to enter the stock recovery until the firmware is released by Samsung or a specific root is developed for our phone. I just found this out a minute ago
Click to expand...
Click to collapse
Does anyone have the stock recovery image? Since rooting my phone has not went into deep sleep. Only way to fix it, seems to be flash stock recovery back. I have twrp/cwm/tmo stock and none work.
bwcorvus said:
Does anyone have the stock recovery image? Since rooting my phone has not went into deep sleep. Only way to fix it, seems to be flash stock recovery back. I have twrp/cwm/tmo stock and none work.
Click to expand...
Click to collapse
Actually, the T-Mobile stock recovery for the S6 Edge does work on our phone. I would have have posted the link to the recovery, but when booting into recovery takes a long time like 45 to 60 seconds before see the "installing system update" then it takes you to system recovery. I seen a post to fix the battery issue you need to wipe the cache partition after flashing the stock recovery. If anybody wants the link to T-Mobile S6 Edge Stock Recovery let me know.
T-Mobile S6 Edge stock Recovery can be found here:
http://zidroid.com/download-t-mobile-galaxy-s6-edge-g925t-stock-recovery/