Case Recommendations - Huawei MediaPad X2

I have ordered three different cases for my X2. One is the frosted white back clear case which fits perfectly but adds some decent amount of bulk. The other is a completely clear IMAK case (it has small little dots on the back) which I really like but it fits the phone so loosely that it isn't even usable. The other case I purchased is the hard matte snap on case by aixuan which I like but there is no protection on the top and bottom. If anyone knows of any cases that fit well and aren't too bulky please post them here.

These are the ones I ordered.
http://www.ebay.com/itm/25205458427...49&var=550911249694&ssPageName=STRK:MEBIDX:IT
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.ebay.com/itm/AIXUAN-Bran...nor-X2-/171750007845?var=&hash=item27fd192425
Buttons were reversed for the X1 had to cut the center stripe out to fit perfect. Becareful on the cut and on your fingers.
http://www.aliexpress.com/item/Luxu...h-Back-Cover-Case-For-huawei/32408152216.html
http://www.amazon.com/Extended-XX-L...qid=1440259745&sr=8-2&keywords=tablet+holster
Thats about the best I could find. I already had a folio case and a smart case with a window. Just need a lock code, haha.

mtyler7807 said:
Thats about the best I could find. I already had a folio case and a smart case with a window. Just need a lock code, haha.
Click to expand...
Click to collapse
That last one looks interesting. Its annoying to always forget a big smartphone like that in the Summer when you do not have a jacket to carry it in

Benjiro said:
That last one looks interesting. Its annoying to always forget a big smartphone like that in the Summer when you do not have a jacket to carry it in
Click to expand...
Click to collapse
Exactly. Thats the only waist holster I could find for a phablet this size. With the black case or folio fit nicely thou.

mtyler7807 said:
These are the ones I ordered.
http://www.ebay.com/itm/25205458427...49&var=550911249694&ssPageName=STRK:MEBIDX:IT
http://www.ebay.com/itm/AIXUAN-Bran...nor-X2-/171750007845?var=&hash=item27fd192425
Buttons were reversed for the X1 had to cut the center stripe out to fit perfect. Becareful on the cut and on your fingers.
http://www.aliexpress.com/item/Luxu...h-Back-Cover-Case-For-huawei/32408152216.html
http://www.amazon.com/Extended-XX-L...qid=1440259745&sr=8-2&keywords=tablet+holster
Thats about the best I could find. I already had a folio case and a smart case with a window. Just need a lock code, haha.
Click to expand...
Click to collapse
I like the first one but I wish it didn't have the dragon on the back. The second one I have and it's made for the X2 but the top and bottom are open which offers no protection. The aluminum cases cut the signal a little bit which I don't like. I am not in the market for a holster although that one is nice.

The Aixuan case they send me was probably the wrong one. And your right, no protection. The dragon is not to noticable, I use that one the must because of the full protection, The metal case looks the best, doesn't hurt my signal. Which bluetooth headset do you use?

mtyler7807 said:
The Aixuan case they send me was probably the wrong one. And your right, no protection. The dragon is not to noticable, I use that one the must because of the full protection, The metal case looks the best, doesn't hurt my signal. Which bluetooth headset do you use?
Click to expand...
Click to collapse
I actually don't use a bluetooth headset, only the Bluetooth in my car. I was using a Motorola H730 Bluetooth headset about a year ago but my girlfriend uses it now. I may just order the dragon case. It kinda looks like the Spigen cases from the sides of it. I really like the Spigen Ultra Hybrid cases with the clear back. I have one on my Nexus 6. It looks sick with the DBrand Carbon Fiber Skin. I wish DBrand made skins for the X2. This is the only case that is decent that fits the phone perfectly:
http://www.ebay.com/itm/New-White-TPU-Matte-Gel-skin-case-cover-For-Huawei-MediaPad-X2-Honor-X2-/181789469604?hash=item2a537f2ba4

ajsmsg78 said:
If anyone knows of any cases that fit well and aren't too bulky please post them here.
Click to expand...
Click to collapse
I'm using this 3rd party smart cover from Taobao. The fit is good, and overall thickness becomes 12.7mm.

(sorry about the cross-post, but this case is really good so i figured I would post here as well )
I bought one of these:
http://www.amazon.com/gp/product/B00...ilpage_o06_s00
Its a bit of a tight fit when you first get it, but it really only needs an extra millimeter or two of width to make it perfect. I took mine to my local shoe repair guy who stretched it for me, and now it's perfect! It's a great case too. The fact that it can swivel and come off the belt clip has turned out to be really important since the phone is so big.

I like covers that have a window. The X2 window is cool. [BEARLIFE] Silk Pattern Flip PU Window View Leather Case with Inner Hard Plastic Cover for Huawei Honor X2 (7 inch screen) (Black) It has the magnet in it and use smart cover on under display.
This is a "PU leather" meaning not leather at all but cheap and relatively fast. Back is hard. Cover doesn't close completely unless pushed down, but I think that PU issue will go away with a little use. Only issue is it hides the beautiful gold phablet. (I never thought I would say beautiful or gold about a phone.
http://www.amazon.com/gp/product/B014339VHW?psc=1&redirect=true&ref_=oh_aui_detailpage_o09_s00
I have a different gold window version from a different vendor which, which I'm willing to bet is identical except for color.
At < $13, recommended.

Rudolpht said:
I like covers that have a window. The X2 window is cool. [BEARLIFE] Silk Pattern Flip PU Window View Leather Case with Inner Hard Plastic Cover for Huawei Honor X2 (7 inch screen) (Black) It has the magnet in it and use smart cover on under display.
This is a "PU leather" meaning not leather at all but cheap and relatively fast. Back is hard. Cover doesn't close completely unless pushed down, but I think that PU issue will go away with a little use. Only issue is it hides the beautiful gold phablet. (I never thought I would say beautiful or gold about a phone.
http://www.amazon.com/gp/product/B014339VHW?psc=1&redirect=true&ref_=oh_aui_detailpage_o09_s00
I have a different gold window version from a different vendor which, which I'm willing to bet is identical except for color.
At < $13, recommended.
Click to expand...
Click to collapse
Thanks for the recommendation. I am buying this inexpensive one because I want to see how well I acclimate to a flip case. I am eyeing some of the alligator-textured genuine leather ones with the window on AliExpress. I have sent the seller a message to ask if it's a smart case with the sleep function... I am also happy that this one will come quickly!
Sent from my SM-N900T using Tapatalk

VillaRegina said:
Thanks for the recommendation. I am buying this inexpensive one because I want to see how well I acclimate to a flip case. I am eyeing some of the alligator-textured genuine leather ones with the window on AliExpress. I have sent the seller a message to ask if it's a smart case with the sleep function... I am also happy that this one will come quickly!
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
VR. I did receive the second protector (it took a while crossing the Pacific). It is great. It is gold and the back tray is clear so it shows off the device better. (This coming from black and grey phone buyer.). It has two other major advantages.
1) The side spine is stiff and it closes well. I had to keep creasing the spine.
2) The solid spine allows yo to bend the cover back to sit flat. The important part is it does NOT trigger the smart cover. The first cover magnet did random triggeri g with the device open. Best 13.30 I ever spent.

DO NOT ORDER FROM "AliExpress"!!!!!!!!!!!!!!!!!!! They ripped me off legally and can get away with it.... They couldn't send me the case I ordered so I agreed on another case in its place and they sent me the wrong replacement... Instead of making it right... They said I could send it back for a refund but would have to pay shipping... They still advertise the case I had originally ordered... They are in China and I'm here in the states which makes it easy for them to rip you off...

Steamer2499 said:
DO NOT ORDER FROM "AliExpress"!!!!!!!!!!!!!!!!!!! They ripped me off legally and can get away with it.... They couldn't send me the case I ordered so I agreed on another case in its place and they sent me the wrong replacement... Instead of making it right... They said I could send it back for a refund but would have to pay shipping... They still advertise the case I had originally ordered... They are in China and I'm here in the states which makes it easy for them to rip you off...
Click to expand...
Click to collapse
Sorry to hear that, Steamer! I just squeaked by with a narrow escape on AliExpress. My issue was with an actual Tablet order. I, too, warn everyone to seriously consider who (and where) you are dealing with before you order... I think the stress isn't worth it...
Sent from my GEM-702L using Tapatalk
---------- Post added at 02:30 PM ---------- Previous post was at 02:22 PM ----------
Rudolpht said:
VR. I did receive the second protector (it took a while crossing the Pacific). It is great. It is gold and the back tray is clear so it shows off the device better. (This coming from black and grey phone buyer.). It has two other major advantages.
1) The side spine is stiff and it closes well. I had to keep creasing the spine.
2) The solid spine allows yo to bend the cover back to sit flat. The important part is it does NOT trigger the smart cover. The first cover magnet did random triggeri g with the device open. Best 13.30 I ever spent.
Click to expand...
Click to collapse
The one that you recommended from Amazon is being delivered on Wednesday. One thing about Amazon... I think they punish you for not being on Prime by extending the processing and ship time of your orders... Ticks me off... Anyway, the one that you recommended came in colors and I chose the champagne gold... I double-checked and it looks like it has a solid color back. So it must be a different one. I am desperate to get it because I am OCDing like crazy not having a case. I still have the shipping screen protector and the back protector on. I will keep them on until they start getting icky... I do already have screen protectors for it. I still am not sure if I am going to acclimate to a flip case... Or be able to set up my phone to take advantage of the window... This is my test case...
Sent from my GEM-702L using Tapatalk

Rudolpht said:
I like covers that have a window. The X2 window is cool. [BEARLIFE] Silk Pattern Flip PU Window View Leather Case with Inner Hard Plastic Cover for Huawei Honor X2 (7 inch screen) (Black) It has the magnet in it and use smart cover on under display.
This is a "PU leather" meaning not leather at all but cheap and relatively fast. Back is hard. Cover doesn't close completely unless pushed down, but I think that PU issue will go away with a little use. Only issue is it hides the beautiful gold phablet. (I never thought I would say beautiful or gold about a phone.
http://www.amazon.com/gp/product/B014339VHW?psc=1&redirect=true&ref_=oh_aui_detailpage_o09_s00
I have a different gold window version from a different vendor which, which I'm willing to bet is identical except for color.
At < $13, recommended.
Click to expand...
Click to collapse
I just got this cover from AMAZON today! I got it in Gold. Looks great with the Gold X2! I think a Black one would look good, too. I have some questions... First, I was thrilled to see that the display in the window automatically appears with no setup!!! But, unfortunately, it's not showing the correct city. I am in Suffolk and it's showing Chesapeake which is about 12 miles away… I have no clue how to fix that... My OCD self would be happier if I could!!! Second, my window display only stays on for about 2 seconds and then goes black… is that what it is supposed to do? I wish it would go on when you pick up the phone… Anyway, I like the case so much that I ordered 4 more in Gold from AliExpress (I know…)… they are having their 11/11 sale and they're less than half price… so I got 4 for $14…
Sent from my GEM-702L using Tapatalk

VillaRegina said:
I just got this cover from AMAZON today! I got it in Gold. Looks great with the Gold X2! I think a Black one would look good, too. I have some questions... First, I was thrilled to see that the display in the window automatically appears with no setup!!! But, unfortunately, it's not showing the correct city. I am in Suffolk and it's showing Chesapeake which is about 12 miles away… I have no clue how to fix that... My OCD self would be happier if I could!!! Second, my window display only stays on for about 2 seconds and then goes black… is that what it is supposed to do? I wish it would go on when you pick up the phone… Anyway, I like the case so much that I ordered 4 more in Gold from AliExpress (I know…)… they are having their 11/11 sale and they're less than half price… so I got 4 for $14…
Sent from my GEM-702L using Tapatalk
Click to expand...
Click to collapse
I guess you do like the case ;}
Try to go into... weather of all places and change the location to your home or have it update (I think every 30 minutes is the smallest time cycle). Also turn on your GPS and may need need high accuracy, though I always leave it on Battery Savings.
It does frustrate me too sometimes. For example the Transparent weather app widget doesn't update (switched to Ambient Weather), so I think it is an Android issue with the X2, not the window.

Rudolpht said:
I guess you do like the case ;}
Try to go into... weather of all places and change the location to your home or have it update (I think every 30 minutes is the smallest time cycle). Also turn on your GPS and may need need high accuracy, though I always leave it on Battery Savings.
It does frustrate me too sometimes. For example the Transparent weather app widget doesn't update (switched to Ambient Weather), so I think it is an Android issue with the X2, not the window.
Click to expand...
Click to collapse
I just don't like my phone looking "grungy" so I won't feel guilty about tossing the case when it starts to look worn! I have the GPS set to the most accurate settings and the weather app I use shows the correct city (although the street address it specifies is always different and never correct - sometimes it is next door and sometimes a block away but my OCD self is ok with that because that shows on the second page and I rarely look at that page…) So I guess I will just have to grit my teeth and deal with CHESAPEAKE! I looked at the genuine leather cases on AliExpress but most didn't have windows. The only one that did didn't have the sleep function... I was a bit bummed… but this Gold is pretty!
Sent from my GEM-702L using Tapatalk

VillaRegina said:
I just got this cover from AMAZON today! I got it in Gold. Looks great with the Gold X2! I think a Black one would look good, too. I have some questions... First, I was thrilled to see that the display in the window automatically appears with no setup!!! But, unfortunately, it's not showing the correct city. I am in Suffolk and it's showing Chesapeake which is about 12 miles away… I have no clue how to fix that... My OCD self would be happier if I could!!! Second, my window display only stays on for about 2 seconds and then goes black… is that what it is supposed to do? I wish it would go on when you pick up the phone… Anyway, I like the case so much that I ordered 4 more in Gold from AliExpress (I know…)… they are having their 11/11 sale and they're less than half price… so I got 4 for $14…
Sent from my GEM-702L using Tapatalk
Click to expand...
Click to collapse
You might have to turn double tap off and pocket mode off for the screen to stay on with a call coming in.
.

Unfortunately we don't have double-tap on 702 5.0 The pocket off is a good suggestion. You can also set some other gestures.
The window off is a "feature" of all window cases I have owned across 5 devices, The intent is to save battery. The fix is to lengthen battery. You can set the display time to lock longer.

I just ordered one of these skins. They come in different colors and finishes. Just go on eBay and search for Skinomi TechSkin Mediapad X2.

Related

Nillkin 360 Hard Case w/ Stand

Hey guys, I found this case today for those who may be looking for a case with stand.
Different colors to choose from.
EDIT: I don't know if it is just for today but you can use this code OBOYEAR to get 30% OFF.
http://www.obostore.com/nillkin-360-shinning-hard-faceplate-for-htc-sensation-p-1935-c-141.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
not a fan of that color, but the design is really nice, i wonder how durable the case & stand are
Yes, I don't like the color but pretty cool design. I wish they had the same in black
The kickstand thread had the link to an ebay seller which had this and two other colors, neon friggin green and some other out there color lol. No basic black at all from the ebay seller anyways. The seller sold it for like 30usd IIRC. Too expensive for one of these types of cases IMO but for 12 bux I may get one. lol
EDIT: Got the green one and also a 'white' cover. Pretty cheap too! Will post pics and also mini first impressions when received. Most likely within a week or two.
thanks you OP. FINALLY something to contemplate. much appreciated.
kpjimmy said:
The kickstand thread had the link to an ebay seller which had this and two other colors, neon friggin green and some other out there color lol. No basic black at all from the ebay seller anyways. The seller sold it for like 30usd IIRC. Too expensive for one of these types of cases IMO but for 12 bux I may get one. lol
EDIT: Got the green one and also a 'white' cover. Pretty cheap too! Will post pics and also mini first impressions when received. Most likely within a week or two.
Click to expand...
Click to collapse
Wow 30usd for that cover? that guy is crazy lol. Be sure to post some pictures of it
steve austin said:
thanks you OP. FINALLY something to contemplate. much appreciated.
Click to expand...
Click to collapse
You're welcome, buddy.
Yep ebay can get ya when ur not lookin lol.
Of course I will post pics when I receive it. I have a camera at work for this very reason lol.
Nillkin kickstand case
Just got this in today and slapped it on and took a few pics. The case is like the barely there cases with a slide out kickstand built in. The build is good for 10 bux and the green is ok. It's almost android green so it works for me LOL....
Putting on the case was like putting on the barely there case. Taking it off is the same. Now using the kickstand....well....it's a hit or miss. You can't really use it in portrait, and I am not sure it's supposed to be used that way. That's because the bottom is exposed so the curve of the phone makes it rock back and forth slightly. Now the beauty of this is the portrait mode. This works the best and most stable.
As for flipping the kickstand out, you just take the bottom part and pull straight out. And that's the easy peasy part. Just pull until you past the notch to 'lock' it in place. However, for me, to put away and fold up the kickstand is a bit of a pain. There should be some sort of press release to push the tab that initially locked the kickstand down so that the stand can fold back easy. I just press the track down and push the kickstand to fold. It's scary to do but is the best way I found to fold.
Edit: also note that this case came with a screen protector as well, but I have the HTC one on so now I have a spare if needed.
UPDATE 8/25/11: One thing I found on the Nillken case is that if you use your OEM charger which is pretty bubbly at the connection to the phone; the cable does not seat very well. However, I am using craigsdocks.com's dock and that aftermarket charger cable has no 'bubble' at the end so that seats into the case rather easily with a little filing down at the opening. Just a fyi for all who are looking at this case.
Anyway, here are the pics...
kpjimmy said:
Just got this in today and slapped it on and took a few pics. The case is like the barely there cases with a slide out kickstand built in. The build is good for 10 bux and the green is ok. It's almost android green so it works for me LOL....
Putting on the case was like putting on the barely there case. Taking it off is the same. Now using the kickstand....well....it's a hit or miss. You can't really use it in portrait, and I am not sure it's supposed to be used that way. That's because the bottom is exposed so the curve of the phone makes it rock back and forth slightly. Now the beauty of this is the portrait mode. This works the best and most stable.
As for flipping the kickstand out, you just take the bottom part and pull straight out. And that's the easy peasy part. Just pull until you past the notch to 'lock' it in place. However, for me, to put away and fold up the kickstand is a bit of a pain. There should be some sort of press release to push the tab that initially locked the kickstand down so that the stand can fold back easy. I just press the track down and push the kickstand to fold. It's scary to do but is the best way I found to fold.
Anywhere, here's the pics...
Click to expand...
Click to collapse
That case actually looks really nice. I'm unexpectedly a fan of the green. Might have to shell out a few bucks to get one of these (even though I just ordered the Case-Mate Tough Case).
Great pictures, kpjimmy!
That's a nice case, I like it. I thought that the green was going to be much brighter but it's a really nice color actually, I might order one just to have one around
Thanks for the review and the pictures, man.
My wife has a case just like this for her myTouch 4G except it's clear. Fits really snug to her phone and I like how it hardly adds much bulk at all.
She actually got hers directly from the tmobile store though.
--- Correction... it's actually the myTouch 4G Body Glove Protector. Looks the same though even down to the kick stand. It just has rubber sides for gripping. Take a look for yourself. http://www.t-mobile.com/shop/AddOns...4253-85e0-1bf1e4506a5e&inCart=True&catCode=-1
You notice they hardly released any cases for the sensation.
RaViCa said:
My wife has a case just like this for her myTouch 4G except it's clear. Fits really snug to her phone and I like how it hardly adds much bulk at all.
She actually got hers directly from the tmobile store though.
--- Correction... it's actually the myTouch 4G Body Glove Protector. Looks the same though even down to the kick stand. It just has rubber sides for gripping. Take a look for yourself. http://www.t-mobile.com/shop/AddOns...4253-85e0-1bf1e4506a5e&inCart=True&catCode=-1
You notice they hardly released any cases for the sensation.
Click to expand...
Click to collapse
That's pretty similar! Yea sucks we have to go over the pond to buy stuff lol
UPDATE: One thing I found on the Nillken case is that if you use your OEM charger which is pretty bubbly at the connection to the phone; the cable does not seat very well. However, I am using craigsdocks.com's dock and that aftermarket charger cable has no 'bubble' at the end so that seats into the case rather easily. Just a fyi for all who are looking at this case.
Wow, that green does look pretty good, haha.
Here's an update: The 'correct' way to unfold the kickstand as per nillkin's site. This didn't come in with the instructions so I am glad I did it right! lol
StefanB86 said:
Hey guys, I found this case today for those who may be looking for a case with stand.
Different colors to choose from.
EDIT: I don't know if it is just for today but you can use this code OBOYEAR to get 30% OFF.
http://www.obostore.com/nillkin-360-shinning-hard-faceplate-for-htc-sensation-p-1935-c-141.html
Click to expand...
Click to collapse
cool...nice pick
8/26/11 Update
Just to let you all know that the plug cut outs are a bit off. The volume rocker I do not care too much with, but the rocker is close to the case and not centered. But that could be just so you wouldn't accidentally hit it.
However the plug port is in fact a nuisance. I had to take out an sharp knife (exacto knife is preferred) with a small slim blade and slice away at it like cheese lol. Then filed/sanded the area a bit to smooth it out and now all my usb cords plug in fine oem or not.
Off topic a bit
Along with the kickstand case, I also got a tpu like case. Here it is listed in the market if anyone wants it for cheap.
http://forum.xda-developers.com/showthread.php?p=17011817#post17011817
I purchased one of these but doubt I'll get any more.
Inside the package is a diagram of how to open the kick stand and still it was hard to pull out. Then putting it back I accidentally put a crease in the stand. It's just too hard to move in and out without damaging it. I also don't like that the case does not cover the top or bottom at all. If it had a squared off bottom it could be used for portrait mode. But the way it has nothing on the bottom, the slightest touch causes it to tip when in portrait mode. I don't even know why they show the device in portrait in their advertisements.
It's a very nice concept, but it still needs a little work to be really good.
Also, they include a lent free cloth in the package, in addition to that screen protector .
They do give you a lot for the price though.
I think it would be perfect if they used their TPU case for the body covering. (With a flat bottom for portrait.) And a kick stand that was also TPU or didn't snap so rigidly into place. So it would be a little easier to open and close the kick stand.
As for the colors, I got a golden one. It actually looks like a blend of brown and gold. The case is not as BRIGHT as the pictures. They are not as obnoxious in the actual color when you actually have one. The advertising seems to put a bright spot light on them, to make them appear brighter than they actually are.
Darnell_Chat_TN said:
I purchased one of these but doubt I'll get any more.
Inside the package is a diagram of how to open the kick stand and still it was hard to pull out. Then putting it back I accidentally put a crease in the stand. It's just too hard to move in and out without damaging it. I also don't like that the case does not cover the top or bottom at all. If it had a squared off bottom it could be used for portrait mode. But the way it has nothing on the bottom, the slightest touch causes it to tip when in portrait mode. I don't even know why they show the device in portrait in their advertisements.
It's a very nice concept, but it still needs a little work to be really good.
Also, they include a lent free cloth in the package, in addition to that screen protector .
They do give you a lot for the price though.
I think it would be perfect if they used their TPU case for the body covering. (With a flat bottom for portrait.) And a kick stand that was also TPU or didn't snap so rigidly into place. So it would be a little easier to open and close the kick stand.
As for the colors, I got a golden one. It actually looks like a blend of brown and gold. The case is not as BRIGHT as the pictures. They are not as obnoxious in the actual color when you actually have one. The advertising seems to put a bright spot light on them, to make them appear brighter than they actually are.
Click to expand...
Click to collapse
I tend to agree with you on this. As for the track, I have to litterally take the case off and retract the stand. Otherwise you would likely break something lol.
For the price, not too shabby. Build quality the case 4 stars, kickstand concept 4 stars, however, using it is way to difficult= 2 stars. Overall rating for me is a good 3 stars.
kpjimmy said:
I tend to agree with you on this. As for the track, I have to litterally take the case off and retract the stand. Otherwise you would likely break something lol.
For the price, not too shabby. Build quality the case 4 stars, kickstand concept 4 stars, however, using it is way to difficult= 2 stars. Overall rating for me is a good 3 stars.
Click to expand...
Click to collapse
I just got mine and to correct the problem with the retraction while the phone is inserted, I pulled the kickstand back a little more (not much) to shave the angle piece down a little (the ridge portion) into more of a triangular shape. Now it retracts while the phone is inserted on still locks into place when pulled out.

Review/Pics: Skinomi carbon fiber skin, tab & dock

Got my Skinomi skins today and after applying I have to say I'm impressed. I was eager to see if it would fit in the dock with it on too, and it does. It's just a little tight but it does fit fine.
When the skin arrives it comes shipped in a tube, since it's rolled up in the tube the ends of the skin want to peel up. If it was rolled the other way it would of been much better. After learning from the tablet skin I re-rolled the dock skin the other way and put it back in the tube for 30 minutes or so and that helped.
My advice when putting the skin on is to only use the application fluid on the large main skin parts (top for the tab and bottom for the dock), and be sure NOT to get any fluid on the small edging/side parts of the skin. Once the main back part is on, bubble free and aligned it will be easy to stick down the sides if there's no fluid on them. In my case I put the fluid all over and the smaller side parts kept peeling themselves up and it took a lot of holding down till they were stuck (the whole process took me about an hour for the tablet).
Lesson learned, on the dock skin I only used a small amount of fluid on the main bottom part and none on the little parts and it was a much faster process. Using a hair dryer will aide in the drying time and also makes the skin more malleable so it doesn't want to peel itself back.
The tablet skin comes with a clear screen protector that I'm not using. I use an anti-glare screen protector (3 pack available on Amazon for $14.95) and I like this set up a lot. A few other reviews for this skin said because the clear screen protector is a bit sticky when you close the tab the screen sticks to the skin on the dock and it cause bubbles in the screen. With the very non-sticky screen protector I have, this isn't an issue.
All-in-all I'm impressed with the skin. It's a very tough vinyl, has a great texture to it (actually feels like carbon fiber and makes for a nice feel in the hand) and provides good coverage on almost all of the tablet and dock.
The only down side is the set up (especially if you use a different screen protector) is a little pricy... But, if you want to protect your tablet and dock while making the setup look bad @ss this is the way to go!!
UPDATE: A small part of the corner of the skin (a very thin strip that covers the corner on the top of the tablet) came off, was torn by the case. I contacted Skinomi as the skin has a lifetime warranty and they're sending me a whole new skin for free. Prompt customer service too. Good company...
Links:
Tablet skin on Amazon, $26.94 with shipping
Dock skin on Amazon, $18.94 with shipping.
If you like this review please click the thanks button below!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If anyone wants pics of any specific part of the tab or dock to see exact fitting just let me know and I'll take it and post here!
how do you feel about this vs a case? if you were to drop this i dont see where it would help. its more for scratch proofing ?
Crizthakidd said:
how do you feel about this vs a case? if you were to drop this i dont see where it would help. its more for scratch proofing ?
Click to expand...
Click to collapse
This would do absolutely nothing in the event of a drop!! lol. But, I don't like to always have my tablet in a case and this will help prevent scratches when I'm using it around the house out of the case (sometimes I take the tablet with me while it's docked too and I only have a neoprene case for this, this skin helps once I pull out the tablet in this situation). Great scratch protection, no protection for drops... And it looks cool, and feels cool, and is cool
lol ugh maybe you can help me decide between this skin and these 2
http://www.amazon.com/gp/product/B0088IA9PC/ref=oh_details_o02_s00_i01
http://www.amazon.com/Poetic-Transformer-Infinity-Keyboard-Portfolio/dp/B008LM04T6
i have the dock, but do not care about protecting it, dont have a screen protector, just want a case for when i take the tablet out to school or meetings
Crizthakidd said:
lol ugh maybe you can help me decide between this skin and these 2
http://www.amazon.com/gp/product/B0088IA9PC/ref=oh_details_o02_s00_i01
http://www.amazon.com/Poetic-Transformer-Infinity-Keyboard-Portfolio/dp/B008LM04T6
I have the dock, but do not care about protecting it, dont have a screen protector, just want a case for when i take the tablet out to school or meetings
Click to expand...
Click to collapse
I have a case very similar to the Poetic case (2nd link) although it doesn't rotate. I didn't need to rotate the screen as I rarely use it in portrait mode and wanted as slim a case as I could get. I got the Blurex Slim Folio Case on Amazon for $21.99 and I think it's a great case! Slim, good fit, and I think it provides about as much protection as you can get with a case of this nature.
I actually have the 1st case you linked to on order, it will be here tomorrow. Not so sure about it but I guess I'll find out tomorrow. I'll update this reply once it gets in!
UPDATE: Got the Poetic Tablet/Dock case today and I like it. It does add a LOT of thickness to the whole setup but it provides good coverage and I like the little pockets for business cards and other notes. It also has two pen holders (good for styli). Looks professional too. If you don't mind a thick setup I'd recommend this case!
Thanks for the review. After debating for some time, I ended up ordering the brushed steel one. I hope it looks decent
How does it feel when holding the tablet(without the dock)? Does it feel like it might peel where you hold it on the edges?
AspenMan said:
This would do absolutely nothing in the event of a drop!! lol. But, I don't like to always have my tablet in a case and this will help prevent scratches when I'm using it around the house out of the case (sometimes I take the tablet with me while it's docked too and I only have a neoprene case for this, this skin helps once I pull out the tablet in this situation). Great scratch protection, no protection for drops... And it looks cool, and feels cool, and is cool
Click to expand...
Click to collapse
ACTUALLY....it will do alot of good in a drop. The innitial impact won't be saved, however when you drop something it usually bounces and/or slides. The full skins will mitigate most of the damage from all the scuffs, dings, and scratches that come after the initial impact. I dropped my Galaxy Note and the corner has a pretty good ding, but the skin was skuffed to hell and looked like ****. I was ticked that my phone looked like it was worn as a shoe down a gravel road. I peeled the skin off and was taken back at the fact that there wasnt a single mark on it other then the corner where it landed. I immediately ordered a new skin from ArmorSuit telling them it saved my phone, they refunded the purchase I just made and sent me one for free telling me they were glad it worked and the lifetime warranty covered it. The only reason my tf700 doesnt have a full skin yet is because I use the rooCase snap on that is a little too tight. Full skins pay you back exponentially when the day comes to sell it and you peel it off to see nearly brand new device.
Does the skin cover the sharp edges of the tab next to the bezel ? I can't really find out from the pics I've seen.
I find the tab quite uncomfortable to hold for a long while because of those rather nasty edges...
Thanks.
My Skinomi Clear Skin arrived today but I'm not going to install it yet. I'm going to send my tablet for repair or swap for new unit because of bad quality on glass/screen installation on lower left corner...
dalingrin said:
How does it feel when holding the tablet(without the dock)? Does it feel like it might peel where you hold it on the edges?
Click to expand...
Click to collapse
It doesn't feel like it will peel but the edges are just a little rough. I don't find it to be a big deal and now that I've had it on for a day I've come to really, really like it. Feels solid and is very "grippy".
fntms said:
Does the skin cover the sharp edges of the tab next to the bezel ? I can't really find out from the pics I've seen.
I find the tab quite uncomfortable to hold for a long while because of those rather nasty edges...
Thanks.
Click to expand...
Click to collapse
It doesn't cover the sharp sides around the bezel, doesn't quite reach around far enough.
Do they sell the skin for the dock alone. I already have a zagg shield for the tablet.
Eroc162 said:
Do they sell the skin for the dock alone. I already have a zagg shield for the tablet.
Click to expand...
Click to collapse
They do, link is in the review but here it is again: http://www.amazon.com/gp/product/B006ZPPDFG/
Right now you can only buy them separately. I have the TF201 dock, not sure if the TF700 will be any different size wise once it's released (doubt it).
I just ordered this based on your review, thanks, though shipping could take a while. How is the bundled screen protector? I had skinomi on my atrix, and was impressed, but that wasn't a high res screen, so any blur was unnoticeable. Is it a good clear cover, or does brightness and clarity take a hit? Thanks
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
wow these are beautiful skins...but god damn cant get them shipped to canada!!! grrrrrrrrrr we always have to be left out
I just ordered a tf201 skinomi dock skin in clear for my tf700 dock on ebay. Skinomi sells them on ebay $16. Anybody have a Zagg screen saver and a dock. How does the Zagg fit? Does it look like it will peel off the Zagg over time. I have the Zagg here waiting for my replacement to arrive and wondering if I should cut a section out where the dock's padding touches the screen. The last thing I want is for the cushions to peel off.
update
I installed the tf201 dock skinomi cover and it fit fine. Its a pain in the neck to get it right though. seems thinner then the Zagg.
I installed the brushed steel one today on my TF700 and it looks stunning (it even have textured feel to it). The installation was painless and took only few minutes. I have not yet installed it on the dock (dock is still sealed) but from the various cutouts, it look like it will be trickier to install than the tablet.
On the other hand, I did not like the screen protector that came with it. It was pain to align correctly and even after taking out all water from underneath, it still has a lot of water streaks. According to the instructions, they are supposed to go away after couple of days so I will wait and see. My recent experience with another wet application screen protector was ArmourSuit for Nexus 7 and it was a breeze to install and it was completely clear within few minutes.
Installed the dock screen yesterday and I still have micro bubbles. Not as much as I had yesterday but still have them non the less. No biggie. Its definitely attaches alot quicker than Zagg. I tell you what, I'm happy I don't have to do it again lol.
Sent from my LG-P999 using xda premium
ajamils said:
I installed the brushed steel one today on my TF700 and it looks stunning (it even have textured feel to it). The installation was painless and took only few minutes. I have not yet installed it on the dock (dock is still sealed) but from the various cutouts, it look like it will be trickier to install than the tablet.
Click to expand...
Click to collapse
The dock is actually easier. The part I found hard was the small parts of the tablet skin on the side/top/bottom kept wanting to peel themselves back and it took a lot of holding it in place while drying. The dock I would only use a small amount of the fluid on the main piece and just stick on all the small pieces, it's easy and nothing wants to peel itself back.
ajamils said:
On the other hand, I did not like the screen protector that came with it. It was pain to align correctly and even after taking out all water from underneath, it still has a lot of water streaks. According to the instructions, they are supposed to go away after couple of days so I will wait and see. My recent experience with another wet application screen protector was ArmourSuit for Nexus 7 and it was a breeze to install and it was completely clear within few minutes.
Click to expand...
Click to collapse
I don't plan on using the screen protector, don't like the feel of it and I prefer anti-glare. I used a similar one on my Xoom and it took almost a week for the streaks to clear and even then it didn't look very good. I also read another review that said the screen protector will stick to the skin on the dock and cause bubbles to form. The anti-glare screen protector I use isn't sticky at all and I don't have this issue (Poetic anti-glare screen protectors - 3 pack, $14.95 on Amazon)

i-Blason TPU Case

I was perusing the Rearth Case thread and from there came across the i-Blason TPU case. Like the Rearth, it's $10USD well in US, not sure if it's available internationally yet.
I have it on and sporting it right now. I do like it. It gives the phone better grip IMO. The only negative is that it's not clear. I mean you can still see the nexus name but not the sparklies lol. I have also posted a pic of a holster that I had back when the HTC Sensation first came out and I needed some sort of holster before Seidio came out with one. Don't mind the cords lol...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Other colors are black and pink.
Anywhere here is the amazon linkage
http://www.amazon.com/i-Blason-SoftGel-Flexible-Frost-Clear/dp/B009Y0ZH6Y/ref=lh_ni_t
I have already ordered this case from amazon it should be here Monday or Tuesday, I will post impressions then.
Sent from my Nexus 4 using xda app-developers app
I ordered it too. We'll see how it goes.
Sent from my Nexus 4 using Tapatalk 2
Um, I already ordered two other cases but I like this one better.
Put it on my wish list.
I also ordered this same case, in the frost, I will also post my impressions about it.
Sent from my Nexus 4 using xda app-developers app
If someone could comment on a good glossy tpu case (maybe this one is), I find those have much better grip than matte.
kpjimmy said:
I was perusing the Rearth Case thread and from there came across the i-Blason TPU case. Like the Rearth, it's $10USD well in US, not sure if it's available internationally yet.
I don't have a N4 but waiting for one eventually and wanted to see what cases there are. Currently I have a Sensation with an i-Blason case and love it as well. Anyone want to try it out? I personally want a clear/frost one. Other colors are black and pink.
Anywhere here is the amazon linkage
http://www.amazon.com/i-Blason-SoftGel-Flexible-Frost-Clear/dp/B009Y0ZH6Y/ref=lh_ni_t
Click to expand...
Click to collapse
Please dont buy these I-Blazon cases, they are the same ones sold from china for so much cheapER!! BEWARE!!!!
FaDeGFX said:
Please dont buy these I-Blazon cases, they are the same ones sold from china for so much cheapER!! BEWARE!!!!
Click to expand...
Click to collapse
The "s line" ones from China are really thick and ugly IMO, I haven't seen much else on eBay yet
yomuppet said:
The "s line" ones from China are really thick and ugly IMO, I haven't seen much else on eBay yet
Click to expand...
Click to collapse
im saying that this case can be found with a brand for cheaper
FaDeGFX said:
im saying that this case can be found with a brand for cheaper
Click to expand...
Click to collapse
I respectfully disagree with your opinion. For my Sensation, I have both the cheap ebay ones that can be bought for around 2-4 dollars and I currently have the i-Blason. Yes they are similar, but the main difference for me when I got these for my Sensation was that the openings and buttons did not align 100%. With the i-Blason, on the Sensation anyway did. So that is why I was inquiring if anyone has tried these out yet.
But you may be right, you never know with new products, but I want to see the proof in the pudding.
I don't know about their quality yet, but I pre-ordered with them because they claimed to be shipping on the 13th. So I figured I'd pick it up just because it was the first case I saw available.
Well turns out it didn't ship until the 21st and that was the last day of their expected timeframe that it would be delivered. They did not expedite the shipping and would not get back to me about requesting a refund on the shipping.
At this point, even if it's a nice case I'm sending it back. I don't like doing business with companies that fail to communicate (and yes, at least with Google I had someone to call regardless of them knowing something, they still answered. They also honored Free shipping for failing to meet shipping timeframe).
Other than that, I ordered the black one and I'll update with the quality of it and pics with it on the device.
Sent from my Nexus 4 using xda app-developers app
I also ordered this case in Frost Clear.
I was a little disheartened to look at the product photos today and see the true representation of the case on the phone.
When I ordered the case on the 19th, the images they showed on Amazon were obviously Photoshopped, but I had hoped they were a decent representation of the case, just not having an actual model phone to place them on for product photos.
The Frost Clear product on the 19th looked like this in their image : imgur.com/PrIEy.jpg
Now, looking at the new image they have, the thing is near white. : imgur.com/PrIEy.jpg
I should have mine in an hour or two, and can take photos and post if anyone is interested. I'll wait to get it in my hands to determine if I'm satisfied. I was looking for something a bit more subdued and dark, yet clear enough to see the rear design of the phone a bit. This new white frosted version is much the opposite of that.
kpjimmy said:
I respectfully disagree with your opinion. For my Sensation, I have both the cheap ebay ones that can be bought for around 2-4 dollars and I currently have the i-Blason. Yes they are similar, but the main difference for me when I got these for my Sensation was that the openings and buttons did not align 100%. With the i-Blason, on the Sensation anyway did. So that is why I was inquiring if anyone has tried these out yet.
But you may be right, you never know with new products, but I want to see the proof in the pudding.
Click to expand...
Click to collapse
Hmmm, for my sisters s3 she had also ordered 2 cases. One from I-Blason for 15$ and the same on from hong kong for 2.50$ and in the end I think even the Hong Kong was better but your opinion is your own and I will not change it Its just im in high school and I make sure to get the best deals because I cant just go buy the most expensive ones.
Received mine - Photos
Just got mine in the mail. Again, it's definitely not what I was expecting with the original product shots they used on the amazon page.
Here's the gallery : imgur.com/a/QcCKr
I got this as a stop-gap until the bumper or a nicer case was available, so I'm not cringing so much for the time being, but it definitely looks cheap and looks like a toy with this on.
I was hoping for a more tinted plastic with a dark tinted plastic for the back, as the original images would have you believe.
I can say, for the most part, the new photos are very representative of the final product.
Aside from the looks, it feels pretty secure. the case has a bit of give on the left and right sides of the phone, making it feel squishy. The back part that is frosted isn't very grippy, it's more of a paper-like feel, like they just sanded down the clear material. there's no logos to be seen on the case at all, which i'm actually quite happy about. I figured the i-blason logo was going to be on the back, as some of the images had shown. The clear portions aren't super grippy, but there's a bit more than the bare Nexus 4 had. The buttons are harder to press than they are bare.Kinda hard to get used to the pressure needed. It's not a ton, but more than I'm used to.
There's a notch at the top of the front, for the receiver, which was a nice touch, to keep it fully open. The ridge around the front of the phone covers the chrome completely and comes in on the curved glass almost all the way. the height from screen-plane to top of the ridge is probably no more than 1mm, if that. It's the same thickness as a credit card, if that gives anyone a good indicator.
Overall, I'm alright with the purchase. I wasn't expecting a top quality case, just something to make me feel a bit more secure with it until the right case arrives. I didn't like the common s-curve case, so I got this one. sorta wished I had gotten the dark grey s-curve instead, to have the darker look I wanted.
Hope this helps anyone else out there.
delrazor said:
Just got mine in the mail. Again, it's definitely not what I was expecting with the original product shots they used on the amazon page.
Here's the gallery : imgur.com/a/QcCKr
I got this as a stop-gap until the bumper or a nicer case was available, so I'm not cringing so much for the time being, but it definitely looks cheap and looks like a toy with this on.
I was hoping for a more tinted plastic with a dark tinted plastic for the back, as the original images would have you believe.
I can say, for the most part, the new photos are very representative of the final product.
Aside from the looks, it feels pretty secure. the case has a bit of give on the left and right sides of the phone, making it feel squishy. The back part that is frosted isn't very grippy, it's more of a paper-like feel, like they just sanded down the clear material. there's no logos to be seen on the case at all, which i'm actually quite happy about. I figured the i-blason logo was going to be on the back, as some of the images had shown. The clear portions aren't super grippy, but there's a bit more than the bare Nexus 4 had. The buttons are harder to press than they are bare.Kinda hard to get used to the pressure needed. It's not a ton, but more than I'm used to.
There's a notch at the top of the front, for the receiver, which was a nice touch, to keep it fully open. The ridge around the front of the phone covers the chrome completely and comes in on the curved glass almost all the way. the height from screen-plane to top of the ridge is probably no more than 1mm, if that. It's the same thickness as a credit card, if that gives anyone a good indicator.
Overall, I'm alright with the purchase. I wasn't expecting a top quality case, just something to make me feel a bit more secure with it until the right case arrives. I didn't like the common s-curve case, so I got this one. sorta wished I had gotten the dark grey s-curve instead, to have the darker look I wanted.
Hope this helps anyone else out there.
Click to expand...
Click to collapse
Just got mine, I ordered the black, but amazon sent me the Frost Clear along with the Black, so I got 2 cases for the price of one lol....I can tell you the black looks nice, much nicer then the clear I think, I had a clear one on my S3 and no matter what clear TPU starts to turn yellow over time. Will post some pics in a few of the black. The case looks alot like Diztronic it has a matte black finish on the back and gloss bezel, it covers the curved edge of the glass, which for me is a nice touch since most screen protectors that arent wet apply won't be covering that part of the phone...one thing is the bottom and top edge, since the bezel is covered up my screen protector i had to cut since it was pushing it up other than that great buy for 10 bucks..also the cutouts are perfectly aligned....no complaints fits securely in the case much like a Diztronic case.
And a few more pics
Well I got my covers and id post pictures but they'd just be redundant. Not much to see
Sent from my Nexus 4 using xda app-developers app
Any way to polish up the back to make it more grippy? Seems silly to have a case be just as slippery as the phone
yomuppet said:
Any way to polish up the back to make it more grippy? Seems silly to have a case be just as slippery as the phone
Click to expand...
Click to collapse
Really havent tried the clear one but the black one is grippy enough where its not super slippery like the phone itself. the back feels the same as the matte finishes on my diztronic cases.
Just received my frost clear one in the mail. Honestly wasn't expecting too much out of it, so I'm pretty content with the product. Sorry I don't have another camera on me to take pictures of it with it on the phone, but the updated pictures on their Amazon page comes pretty close. It is clear around with the back having that "frost" look, so you can see the Nexus and LG logo pretty clearly. I would've liked it if the whole case all around was that translucent frost, but IMO it's not too bad. I also wish the cut outs were more precise, especially for the rear speaker. It's just this big cut out as if they just guesstimated it... this is one thing that looks better and more precisely done in the Amazon photos than IRL. But overall it's alright. Only using it so I don't have to be concerned with damaging my phone until I get a nicer case when they start coming out.

Kickstand Case Suggestions for Galaxy S5

Anyone have any suggestions for a good kickstand case, I would like something that stands both vertical and horizontal view. I do not care about branding, ebay brandless is OK by me (and cheaper). Preferably hybrid.
I am liking this one so far, but I can't find a US vendor for the color I like (lime).
http://www.grashine.com/en/product1.asp?idd=76&ids=4&SortID=74&id=74&idid=24&ord=100#
What kickstand cases do you like/have?
QUESTION REVISED 4/29/14:
What is the best kickstand case under 10 bucks that I can cannibalize to remove the kickstand (to then epoxy it to my favorite S5 non-kick case)?
I used to try to find and use kickstand cases , but 2 yrs ago I cam across the flygrip which was perfect for me as I got tired of searching all the time for a case , now I an purchas any case I find and attach the flygrip directly to it , have a holder on my device to I never drop it and also a kickstand in both directions.
I haven't seen a decent case with a durable kickstand that is stable in both horizontal and vertical positions since the S3 was released (Qmadix case).
So, for my S4 I just found the coolest case and then cut a hole on the back and DIY'd my favorite kickstand (Qmadix) into it.
Unfortunately, that company no longer makes the kickstand case for any phones.
But a nice alternative is to get a stick-on kickstand.
http://www.mouseglider.com/pro1445718.html
Put it on any case.
ex-28 said:
I used to try to find and use kickstand cases , but 2 yrs ago I cam across the flygrip which was perfect for me as I got tired of searching all the time for a case , now I an purchas any case I find and attach the flygrip directly to it , have a holder on my device to I never drop it and also a kickstand in both directions.
Click to expand...
Click to collapse
I had never seen those before. Thanks! Definitely an option.
I am a bit wary of the girth of the item and how it might dig into my leg, or my jeans while the phone is in pocket.
Maybe choose a wallet style case that let's you use the lid as a stand?
Airax said:
Maybe choose a wallet style case that let's you use the lid as a stand?
Click to expand...
Click to collapse
https://www.otterbox.com/Defender-Series-for-Samsung-GALAXY-S5/sam2-galaxy-s5-set,default,pd.html
The proven option and my personal *go to* case for all phones.
Airax said:
Maybe choose a wallet style case that let's you use the lid as a stand?
Click to expand...
Click to collapse
Not durable enough for me, not any that I have seen at least.
I've been using this one for all my GS phones. Very sturdy and not overly bulky plastic that looks much nicer in person. I need only the kickstand feature (the bottom part), can't say anything about the holster.
http://www.amazon.com/gp/product/B00IO8NI0Y/ref=ox_sc_imb_mini_detail?ie=UTF8&smid=AY3SA6XQV4F15
ecksor said:
I've been using this one for all my GS phones. Very sturdy and not overly bulky plastic that looks much nicer in person. I need only the kickstand feature (the bottom part), can't say anything about the holster.
http://www.amazon.com/gp/product/B00IO8NI0Y/ref=ox_sc_imb_mini_detail?ie=UTF8&smid=AY3SA6XQV4F15
Click to expand...
Click to collapse
thank you for finding this. imho - its the best case you can get. i have been using them on all of my phones. i am just hesitating so much considering the phone is already so big :-/
km8j said:
thank you for finding this. imho - its the best case you can get. i have been using them on all of my phones. i am just hesitating so much considering the phone is already so big :-/
Click to expand...
Click to collapse
Looks interesting
Cimo Galaxy S5 Case on Amazon
ecksor said:
I've been using this one for all my GS phones. Very sturdy and not overly bulky plastic that looks much nicer in person. I need only the kickstand feature (the bottom part), can't say anything about the holster.
http://www.amazon.com/gp/product/B00IO8NI0Y/ref=ox_sc_imb_mini_detail?ie=UTF8&smid=AY3SA6XQV4F15
Click to expand...
Click to collapse
My Galaxy S5 came in yesterday (AT&T). I'm thinking OtterBox but until those are ready I've ordered this beaut:
http://www.amazon.com/gp/product/B00IK075DW/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
maddix said:
My Galaxy S5 came in yesterday (AT&T). I'm thinking OtterBox but until those are ready I've ordered this beaut:
http://www.amazon.com/gp/product/B00IK075DW/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I had this for the S3, the hinge got brittle and cracked. Just FYI.
ecksor said:
I've been using this one for all my GS phones. Very sturdy and not overly bulky plastic that looks much nicer in person. I need only the kickstand feature (the bottom part), can't say anything about the holster.
http://www.amazon.com/gp/product/B00IO8NI0Y/ref=ox_sc_imb_mini_detail?ie=UTF8&smid=AY3SA6XQV4F15
Click to expand...
Click to collapse
This was a contender, but I am gun shy on hard cases. I go to the beach frequently, and sometime end up with a little sand in my pockets. A hard case will rub sand into your phone. If even the tiniest amount gets under, your phone will have massive surface damage. Also, not the greatest corner protection for drops.
I REALLY like the kickstand.
Otterbox knock-off under $20 from eBay (iskyphone)
adrockr said:
I had this for the S3, the hinge got brittle and cracked. Just FYI.
Click to expand...
Click to collapse
Thanks for the heads-up. In fact I never opened that case and it has gone back.
For ~$18 including shipping I was able to order an Otterbox knock off from iskyphone on eBay (since removed but they claim it will be re-listed). Camo/orange, case is identical in the way it all goes together, and the belt clip doubles as the kickstand. It's not waterproof but the phone is so that's a wash imho. The case includes a built-in screen protector which I'm not a fan of. It's not the cleanest/clearest plastic but with the brightness of the phone you can't tell any difference (again, imho). Pressing around the edges can be tricky (aka pressing the 'a' key for example), but I suppose the screen needs protecting also.
All in all I'm happy with it and also not having spent an additional $42. Perhaps the official OB is better, but probably not two thirds better.
---------- Post added at 04:31 PM ---------- Previous post was at 04:04 PM ----------
adrockr said:
I had this for the S3, the hinge got brittle and cracked. Just FYI.
Click to expand...
Click to collapse
maddix said:
Thanks for the heads-up. In fact I never opened that case and it has gone back.
For ~$18 including shipping I was able to order an Otterbox knock off from iskyphone on eBay (since removed but they claim it will be re-listed). Camo/orange, case is identical in the way it all goes together, and the belt clip doubles as the kickstand. It's not waterproof but the phone is so that's a wash imho. The case includes a built-in screen protector which I'm not a fan of. It's not the cleanest/clearest plastic but with the brightness of the phone you can't tell any difference (again, imho). Pressing around the edges can be tricky (aka pressing the 'a' key for example), but I suppose the screen needs protecting also.
All in all I'm happy with it and also not having spent an additional $42. Perhaps the official OB is better, but probably not two thirds better.
Click to expand...
Click to collapse
"Tree-Orange" --> http://www.ebay.com/itm/For-Samsung...Cell_Phone_PDA_Cases&var=&hash=item3f349d1d05 :good:
adrockr said:
I had never seen those before. Thanks! Definitely an option.
I am a bit wary of the girth of the item and how it might dig into my leg, or my jeans while the phone is in pocket.
Click to expand...
Click to collapse
have a peek at the youtube videos on the flygrip , there very slim and sturdy i just got my flygrip gravity new style then the original , and just love it , i keep my phone in my jean pockets a lot to , but not skintight geans , just normal , and can never feel it. if you give it a try i almost cirtian you will never go back.
also can be removed with no damage to back of phone or case as it uses 3m adhesive double sided tape to attach .
While its still listed as "under development," I've had their cases on my TB, S3, Note II and as soon as their completed my S5.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.seidioonline.com/samsung-galaxy-s5-convert-case-holster-black-p/bd4-hkr4ssgs5.htm
Kinda $$, but IMO, well worth it.
ex-28 said:
have a peek at the youtube videos on the flygrip , there very slim and sturdy i just got my flygrip gravity new style then the original , and just love it , i keep my phone in my jean pockets a lot to , but not skintight geans , just normal , and can never feel it. if you give it a try i almost cirtian you will never go back.
also can be removed with no damage to back of phone or case as it uses 3m adhesive double sided tape to attach .
Click to expand...
Click to collapse
It looks like an awesome product, but I have never even spent that much on a case, let alone a kickstand. $30 is pretty steep. I wonder if they ever go on sale.
adrockr said:
It looks like an awesome product, but I have never even spent that much on a case, let alone a kickstand. $30 is pretty steep. I wonder if they ever go on sale.
Click to expand...
Click to collapse
I hear you on that oen , it costs me 30 buck for it and 13 to ship it to Canada , I think free or discount shipping code in the us is bbking77 might give a slight or free discount on shipping.
CZ Eddie said:
I haven't seen a decent case with a durable kickstand that is stable in both horizontal and vertical positions since the S3 was released (Qmadix case).
So, for my S4 I just found the coolest case and then cut a hole on the back and DIY'd my favorite kickstand (Qmadix) into it.
Unfortunately, that company no longer makes the kickstand case for any phones.
But a nice alternative is to get a stick-on kickstand.
http://www.mouseglider.com/pro1445718.html
Put it on any case.
Click to expand...
Click to collapse
I have been thinking about this, and until a less sucky kickstand case becomes available, I have decided to revise the question:
What is the best kickstand case under 10 bucks that I can cannibalize to remove the kickstand (to then epoxy it to my favorite S5 non-kick case)?
Provisions:
1. All I need is the kickstand, it can be for any phone on the market. 10 year old phones even.
2. Must be able to stand vertical, and horizonal.
3. Cheap.
4. Preferably black.
Another way to phrase it might be...What is the best vertical kickstand case you have ever owned?
One vote from CZ Eddie on the q-madix case.
Anyone else?
adrockr said:
One vote from CZ Eddie on the q-madix case.
Click to expand...
Click to collapse
I ended up going with a Note 3. And I'm going to do the same DIY mod again because it worked so well last time. But this time, I'm going to take my time and make it have a NICER looking cutout. But here's my DIY thread if you want to check out how I did it.
http://forum.xda-developers.com/showthread.php?t=2488355
This time, I'm going to cut out the hole smaller than it needs to be. And then use a file to gently file the hole out to the correct dimensions. This should make it look more "stock" 'ish.
I recommend the Galaxy S3 Qmadix Metallix kickstand case for sourcing the kickstand part from. You can find it for $10 shipped if you look around.
---------- Post added at 12:28 PM ---------- Previous post was at 12:24 PM ----------
Btw, in the meantime I did use the stick-on kickstand. It works GREAT, even on my Note 3.
The only problem is it creates a bulge on the back of the case that makes it so the phone doesn't sit flat in my car and home docks. And when opened, the hole under the kickstand is just a bit too small for my normal sized fingers to go through, unlike the Qmadix kickstand which my fingers fit inside the loop great.

Top Rated Case from Amazon Round up review : Heavy duty , lightweight , stylish more

Hi , There .
My name is Ben Hoffman , if you are familian with A C forum you will know i am the formed Admin and i was quite good at accessories.
I just joined this forum a couple days ago . So here we go , let us talk about cases .
And the boss of this forum sent me an email , i am so flatted , he is such a nice guy .
I am keep receive more cases from now , so i only add reviews that i already tested , and i will update them when i receive them
Otterbox LGG5 Review
Today i just make a brief review for my lg g5 cases
It's taken more drops then anything.
However, I dropped one star for it's method of installation. Here's why; For this device, I have the extra battery, external charger and USB accessory kit. While under normal use this battery does nicely for a day, I am not a normal user. I can kill a battery FAST. So having two is heaven for me. But getting this case open to get to the phone to swap batteries could have been easier for this particular device. The phone is so ridiculously simple to get into (LOVE IT!). It also obviously won't fit the extra 'friend' parts so far. If I find a solid case that would, I'd consider that one. With my hands, this case is difficult for me to get on and off to swap batteries. But it is the best case out there right now cause I WILL drop my phone.
As it sits, this is still the strongest case out there. Easier to get into might include the Commuter but it also forgoes the screen protector. Wife had one of those last time around and her screen is cracked.
Update: (redid this cause for some reason it didn't show me as a verified purchase the first time... odd) Also I did find the best way to open this case is to use the handle from a basic fingernail clipper or a wide flathead screwdriver from my leatherman. Don't twist it, just push slightly and they unlock. This one is HARD to do with the fingers (at least right now). I suspect they made the connections stronger then before cause of how easy they were to break.
Most people want to customize their phone beyond how it looks out of the box and have some options in the future. I got my wife the G5 a couple days ago and she loved the way it looks but loved it even more after this case.
The case comes in an impressive plastic box with a cut out in the front and a company description on the back. Inside the box is the case and a detailed set of instructions on how to remove the case, along with some product information.
The case fits on easily enough. Remove the gold plastic ring that is on the outside of the case and fit the phone into the TPU shell. Then reapply the gold plastic ring. This is the most difficult part, since not all of the gold plastic ring wants to click in easily, especially around the volume buttons and across from the volume buttons. Once you get everything snapped in you're good to go. The back of the case comes up enough to protect the dual camera's sensors and on button and has a smooth and comfortable feeling downward slope that makes it easy to index the button without looking. The bottom portion of the downward slope is longer than the top portion so allow your finger to fit at the proper angle.
The back of the case is textured but does not feel rough and the side is smooth. The volume buttons are more or less flush with the side of the gold plastic ring portion, but are reliable and easy to use. The bottom has a cutout for the type-c port and speaker, as well as a cutout at the top for the 3.5mm jack and IR blasters. In these areas the gold plastic ring portion is positioned on one side of the cutout and does not go all the way around it.
There are a couple negatives about this case. First, since the back is textured it makes it difficult to securely affix a “fashion ring”, which my wife likes to use. She had this case on today and was holding the phone by the ring when the phone detached and fell to the ground. I'm happy say the case protected the phone fully from its first drop, but this slight niggle might make this case spend more time on a shelf than on the phone in the future. The other negative is that reinforcing ring looks a little too plasticky. I have about 10 other cases for this phone currently, and a few have metallic-looking parts that are plastic but manage to have a more metal look to it. The case is extremely well made, but the plastic ring detracts from the premium look of the case in my opinion.
Link @Amazon http://www.amazon.com/Artech-21-Ark...d=1462662201&sr=8-11&keywords=lg+g5+slim+case
It is 15.99 dollars . 20% off coupon artech21
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i receive an email from the manufactory , they are on a lighting deal now for the lg g5 now
Link https://www.amazon.com/s/ref=nb_sb_...alias=specialty-aps&field-keywords=lg+g5+case
all the lg g5 cases are 2.99 dollars with coupon : G7NFEDFS
Start Date
08/06/20165:00 AMPDT
End Date
08/13/201611:59 PMPDT
3 Lazer Case for LG G5
finally recieved this case in the mail. To be honest, I was surprised at the high quality. When you're a maker of phones cases, it's dificult to make a name for yourself when you have companies like Spigen and Caseology as your competitors. Those companies have already established themselves.
What I liked most about this case was the attention to detail. Like the name suggests, the laser in the name really signifies how thought out everything seems. The cutouts were on point and the volume buttons were tactile, which always keeps me happy. The material for the case has a little bit of a rough touch to it. I'm on the fence about this. I think it's great for a more rugged person but not for all.
The packaging was the only thing that looked cheap. But I'd rathwr them cut money on that end than spend a bunch like Spigen for no real reason.
Overall, this is a great first Artech case to introduce itself. Spigen and Caseology may have a new competitor.
Below is my wife's reveiw
The only criticism I have at this point it is that it did not come with a screen protector which is absolutely vital for for my phones because they go through much abuse. Other than that amazing product crisis perfect great job company well done .
Link
http://www.amazon.com/Artech-21-Lay...id=1462662201&sr=8-1&keywords=lg+g5+slim+case
15.98 dollars ,and you can use artech21 to have 20 % off
Review i found on youtube
UAG Case For LG G5
The Urban Armor Gear Ash case for the LG G5 is the best looking for case for the LG G5. When I first brought my LG G5, I was not sure if I liked the look of it. I ordered this case and once I put it on the device, it gave my device a unique look. It gives the device a rugged military look. The device also has a nice lip when I drop my phone face first the lip of the case hits the ground first. If you have a LG G5 pick this case up.
I've dropped my phones only a handful of times. every time these cases saved my phone from what would have been catastrophic destruction in any other case.
I recently purchased the LG G5. I immediately purchased a UAG case(Ash), a wet apply screen protector and a longer charge cable. When the case arrived I was pleased at first but then. I noticed some inconsistencies having owned these cases before. The plastic and rubber feels much cheaper. The plastic is very slippery feeling in the hand. The rubber is hard, and where the cutouts are it's sharp and abrasive on your fingers. while holding the case the charge port sits on your pinky, with extensive use its very uncomfortable. also above the charge port the rubber is very thin and flimsy and feels like it might tear off.
Someone might gonna know the comparision between Otterbox and UAG . I have to say both of them are premium quality , but Otterbox is more bulky and have extra front panel protection also with a holster . UAG is a lightweight case , also cost 20 dollars less than otterbox
it actually up to yourself , i feel like the touch of Otterbox , but i do not mind to use UAG as daily drive
Link http://www.amazon.com/Feather-light...qid=1462662713&sr=8-1&keywords=lg+g5+uag+case
sorry guys, but Spigen's Neo Hybrid case takes the cake on this one.
http://www.amazon.com/Spigen®-Hybri...d=1462675404&sr=8-2&keywords=spigen+lg+g5+neo
Also, you can get it for free when you sign up for the Super5tar Review program.
shinobix37 said:
sorry guys, but Spigen's Neo Hybrid case takes the cake on this one.
http://www.amazon.com/Spigen®-Hybri...d=1462675404&sr=8-2&keywords=spigen+lg+g5+neo
Also, you can get it for free when you sign up for the Super5tar Review program.
Click to expand...
Click to collapse
sure , the artech21 emailed me that if any interesting in reveiw their case , they can go to the facebook.com/artech21 , simply tell them which case you want to review , they will take good care of you
I just got the Spigen Rugged Armor, amazing case, feels really well made, nice snug fit with really precise cut-outs.
https://www.amazon.co.uk/gp/product/B01B1GQG3G/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
I also have the Spigen Rugged Armor Case, i'm fine with that one. I was surprised about the quality from the Screen Protector they delivered it with.
I wait that spigen case and ringke onyx. Now i use spigen neo hybrid
ATOJAR said:
I just got the Spigen Rugged Armor, amazing case, feels really well made, nice snug fit with really precise cut-outs.
https://www.amazon.co.uk/gp/product/B01B1GQG3G/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
well , i have been an editor for these thing for a long time , before i moved to xda
you will never know the difference and the cost
to me , they are the same , except the concept for marketing , but please forget those crap from ebay
BrunoSlivar said:
I wait that spigen case and ringke onyx. Now i use spigen neo hybrid
Click to expand...
Click to collapse
i wil have my review ready for it soon
Case for battery change out.
Id like to find a case that I don't have to completely remove to change out the battery. Has anyone made something like this?
spencer311 said:
Id like to find a case that I don't have to completely remove to change out the battery. Has anyone made something like this?
Click to expand...
Click to collapse
Spigen and voia have them.
kms108 said:
Spigen and voia have them.
Click to expand...
Click to collapse
I have had that case for a while , the bottom part of thecase will be loose
dallasmanic said:
I have had that case for a while , the bottom part of thecase will be loose
Click to expand...
Click to collapse
I've been using my voia for a few weeks now, still works will, not had problems with the bottom getting loose, on the side note, I do have 3 extra bottom for spares.
kms108 said:
I've been using my voia for a few weeks now, still works will, not had problems with the bottom getting loose, on the side note, I do have 3 extra bottom for spares.
Click to expand...
Click to collapse
thank you for your reply
I must say the Unicorn Beetle Pro is best, fully enclosed case...
https://www.amazon.com/SUPCASE-Full...0&sr=8-1-spell&keywords=unicorn+beattle+lg+g5
dallasmanic said:
Hi , There .
My name is Ben Hoffman , if you are familian with A C forum you will know i am the formed Admin and i was quite good at accessories.
I just joined this forum a couple days ago . So here we go , let us talk about cases .
And the boss of this forum sent me an email , i am so flatted , he is such a nice guy .
I am keep receive more cases from now , so i only add reviews that i already tested , and i will update them when i receive them
Otterbox LGG5 Review
Today i just make a brief review for my lg g5 cases
It's taken more drops then anything.
However, I dropped one star for it's method of installation. Here's why; For this device, I have the extra battery, external charger and USB accessory kit. While under normal use this battery does nicely for a day, I am not a normal user. I can kill a battery FAST. So having two is heaven for me. But getting this case open to get to the phone to swap batteries could have been easier for this particular device. The phone is so ridiculously simple to get into (LOVE IT!). It also obviously won't fit the extra 'friend' parts so far. If I find a solid case that would, I'd consider that one. With my hands, this case is difficult for me to get on and off to swap batteries. But it is the best case out there right now cause I WILL drop my phone.
As it sits, this is still the strongest case out there. Easier to get into might include the Commuter but it also forgoes the screen protector. Wife had one of those last time around and her screen is cracked.
Update: (redid this cause for some reason it didn't show me as a verified purchase the first time... odd) Also I did find the best way to open this case is to use the handle from a basic fingernail clipper or a wide flathead screwdriver from my leatherman. Don't twist it, just push slightly and they unlock. This one is HARD to do with the fingers (at least right now). I suspect they made the connections stronger then before cause of how easy they were to break.
Click to expand...
Click to collapse
I have used a otter box since HTC evo 3g, since then I have never even bought a phone unless they made a case for it. I as well can go thru 3 or 4 charges a day. On my phone 24/7. But with fast charge and the strength of the otter box, I believe its a fair trade.
Sent from my LG-H830 using XDA-Developers mobile app
---------- Post added at 12:11 PM ---------- Previous post was at 12:08 PM ----------
dallasmanic said:
Most people want to customize their phone beyond how it looks out of the box and have some options in the future. I got my wife the G5 a couple days ago and she loved the way it looks but loved it even more after this case.
The case comes in an impressive plastic box with a cut out in the front and a company description on the back. Inside the box is the case and a detailed set of instructions on how to remove the case, along with some product information.
The case fits on easily enough. Remove the gold plastic ring that is on the outside of the case and fit the phone into the TPU shell. Then reapply the gold plastic ring. This is the most difficult part, since not all of the gold plastic ring wants to click in easily, especially around the volume buttons and across from the volume buttons. Once you get everything snapped in you're good to go. The back of the case comes up enough to protect the dual camera's sensors and on button and has a smooth and comfortable feeling downward slope that makes it easy to index the button without looking. The bottom portion of the downward slope is longer than the top portion so allow your finger to fit at the proper angle.
The back of the case is textured but does not feel rough and the side is smooth. The volume buttons are more or less flush with the side of the gold plastic ring portion, but are reliable and easy to use. The bottom has a cutout for the type-c port and speaker, as well as a cutout at the top for the 3.5mm jack and IR blasters. In these areas the gold plastic ring portion is positioned on one side of the cutout and does not go all the way around it.
There are a couple negatives about this case. First, since the back is textured it makes it difficult to securely affix a “fashion ring”, which my wife likes to use. She had this case on today and was holding the phone by the ring when the phone detached and fell to the ground. I'm happy say the case protected the phone fully from its first drop, but this slight niggle might make this case spend more time on a shelf than on the phone in the future. The other negative is that reinforcing ring looks a little too plasticky. I have about 10 other cases for this phone currently, and a few have metallic-looking parts that are plastic but manage to have a more metal look to it. The case is extremely well made, but the plastic ring detracts from the premium look of the case in my opinion.
Link @Amazon http://www.amazon.com/Artech-21-Ark...d=1462662201&sr=8-11&keywords=lg+g5+slim+case
It is 15.99 dollars . 20% off coupon artech21
Click to expand...
Click to collapse
For $12.80 I will give it a shot, can't beat that price. I like that is has so many color options. Most companies have maybe 3 .
Sent from my LG-H830 using XDA-Developers mobile app
fiddy619 said:
I must say the Unicorn Beetle Pro is best, fully enclosed case...
https://www.amazon.com/SUPCASE-Full...0&sr=8-1-spell&keywords=unicorn+beattle+lg+g5
Click to expand...
Click to collapse
I'm actually really contemplating getting this case, does the phone have any wiggle room in the case at all? I hope not. Also how's ur screen quality as far as touch and appearance
NexusS4gFreak said:
I'm actually really contemplating getting this case, does the phone have any wiggle room in the case at all? I hope not. Also how's ur screen quality as far as touch and appearance
Click to expand...
Click to collapse
I had that case on my G3 until it conked out. I can attest that the case is absolutely sturdy and rugged and could survive just about anything perhaps (besides bullets or being run over by an 18 wheeler). The built-in screen protector is god awful though so you'll have to cut it out and replace it with something else.
I didn't want the exact same case for my G5 so I got the Premium version of that case with the transparent back and metal studs:
https://www.amazon.com/SUPCASE-Unicorn-Premium-Protective-Black/dp/B01BRFWXM4
The phone looks beautiful in it and it also carries the Military Standard 810G-516.6 drop protection, it doesn't include a screen protector but adding one yourself is highly preferable to a built-in one that you will have to replace right out of the box.

Categories

Resources