So here's the deal. I have A rooted Droid Incredible and i cant get past the splash image. I tried going into recovery and wiping everything and flashing a new rom but I keep getting the following message:
E: Can't mount dev/block/mmcblk0p1
It comes up when i try to flash a rom and says installation aborted about halfway through installing. It also comes up when i try to wipe and do a factory reset.
If anyone knows a way around this It would be immensely helpful, because as of right now i cant use my phone which is a problem. I'm running clockwork recovery v2.5.0.5.
Dr0pSh0t said:
So here's the deal. I have A rooted Droid Incredible and i cant get past the splash image. I tried going into recovery and wiping everything and flashing a new rom but I keep getting the following message:
E: Can't mount dev/block/mmcblk0p1
It comes up when i try to flash a rom and says installation aborted about halfway through installing. It also comes up when i try to wipe and do a factory reset.
If anyone knows a way around this It would be immensely helpful, because as of right now i cant use my phone which is a problem. I'm running clockwork recovery v2.5.0.5.
Click to expand...
Click to collapse
Try to post this in Droid Incredible's ROM development section - you will find better help there!
Hey guys, i'm having some SERIOUS problems with my 1st generation moto g XT1033.
Some days ago, i flashed stock android 5.0. Alright... So, i discovered that that were cm12 nightlies on the official cyanogenmod site and i flashed it. So, just after that i discovered that dual sim wasn't ported yet so i tried to change to stock 5.0, but my phone entered in a boot loop so i flashed stock 4.4.4, with no luck... now i flashed 5.0 but it's still not booting, i am now thinking about going back to CM12, which already have dual sim... the problem is that i dont know why, TWRP MTP isn't working, so now i just cant pass the CM12 zip to the phone because of that. please i need help i dont know what to do, if there's some way to flashing it without using TWRP's MTP. Thanks a lot and sorry about the english
pedrocarboni said:
Hey guys, i'm having some SERIOUS problems with my 1st generation moto g XT1033.
Some days ago, i flashed stock android 5.0. Alright... So, i discovered that that were cm12 nightlies on the official cyanogenmod site and i flashed it. So, just after that i discovered that dual sim wasn't ported yet so i tried to change to stock 5.0, but my phone entered in a boot loop so i flashed stock 4.4.4, with no luck... now i flashed 5.0 but it's still not booting, i am now thinking about going back to CM12, which already have dual sim... the problem is that i dont know why, TWRP MTP isn't working, so now i just cant pass the CM12 zip to the phone because of that. please i need help i dont know what to do, if there's some way to flashing it without using TWRP's MTP. Thanks a lot and sorry about the english
Click to expand...
Click to collapse
Bad idea, never try to downgrade... If you can still access fastboot you are VERY luck that your phone did not end up in a hard brick. :fingers-crossed:
Try and flash stock 5.0 from fastboot mode. And wipe everything including userdata.
Goodluck!
skyguy126 said:
Bad idea, never try to downgrade... If you can still access fastboot you are VERY luck that your phone did not end up in a hard brick. :fingers-crossed:
Try and flash stock 5.0 from fastboot mode. And wipe everything including userdata.
Goodluck!
Click to expand...
Click to collapse
Thanks for Helping!!! Just one question: How can i pass the stock zip to the phone to flash it if mtp is not working?Any suggestions? Because i think its not possible to flash 5.0 using fastboot, just on the stock recovery
update: I have just figured out that adb is working with CWM, which i have installed right now Yay!now I can push files from my computer!!
https://androidxda.net/how-to-unbrick-moto-g-1st-gen-2013-after-lollipop-5-0-android-update/ :laugh::laugh:
pedrocarboni said:
Thanks for Helping!!! Just one question: How can i pass the stock zip to the phone to flash it using if mtp is not working?Any suggestions? Because i think its not possible to flash 5.0 using fastboot, just on the stock recovery
Click to expand...
Click to collapse
If you have unlocked boot loader then go into fastboot mode and run "fastboot boot customrecovery.img" where customrecovery.img is CWM or TWRP. I recomment TWRP. From there you can adb sideload the zip. Only flash it if you know exactly what you are doing or you may end up in a hard brick.
skyguy126 said:
If you have unlocked boot loader then go into fastboot mode and run "fastboot boot customrecovery.img" where customrecovery.img is CWM or TWRP. I recomment TWRP. From there you can adb sideload the zip. Only flash it if you know exactly what you are doing or you may end up in a hard brick.
Click to expand...
Click to collapse
i used sideload flashing CM12,but i have recieved the error message "could not detect filesystem for /dev/block/platform/msm_sdcc.1/by-name/system, assuming ext4 mount:failed to mount /dev/block/platform/msm_sdcc.1/byname/system: Invalid Argument
unmount of /system failed; no such volume detected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system" and when i try mounting /system, CWM says Error mounting /system!
pedrocarboni said:
i used sideload flashing CM12,but i have recieved the error message "could not detect filesystem for /dev/block/platform/msm_sdcc.1/by-name/system, assuming ext4 mount:failed to mount /dev/block/platform/msm_sdcc.1/byname/system: Invalid Argument
unmount of /system failed; no such volume detected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system" and when i try mounting /system, CWM says Error mounting /system!
Click to expand...
Click to collapse
Do this at your own risk:
Your system partition is corrupt, you need to enter adb shell and format /system into ext4s. Search on google for the command as I do not have it on the top of my head. I believe it has something to do with make_ext4s function.
pedrocarboni said:
Hey guys, i'm having some SERIOUS problems with my 1st generation moto g XT1033.
Some days ago, i flashed stock android 5.0. Alright... So, i discovered that that were cm12 nightlies on the official cyanogenmod site and i flashed it. So, just after that i discovered that dual sim wasn't ported yet so i tried to change to stock 5.0, but my phone entered in a boot loop so i flashed stock 4.4.4, with no luck... now i flashed 5.0 but it's still not booting, i am now thinking about going back to CM12, which already have dual sim... the problem is that i dont know why, TWRP MTP isn't working, so now i just cant pass the CM12 zip to the phone because of that. please i need help i dont know what to do, if there's some way to flashing it without using TWRP's MTP. Thanks a lot and sorry about the english
Click to expand...
Click to collapse
Pedro, I have the same problem.
I can only access bootloader and recovery, but using adb sideload I can't flash any image (and version) that works.
I just get boot looping as you, and gpt.bin and motoboot.img files can't be flashed.
I've found that with Lollipop bootloader we can't install an older Android version.
My Moto G is now a paperweight, until the final stock Lollipop comes.
pedrocarboni said:
i used sideload flashing CM12,but i have recieved the error message "could not detect filesystem for /dev/block/platform/msm_sdcc.1/by-name/system, assuming ext4 mount:failed to mount /dev/block/platform/msm_sdcc.1/byname/system: Invalid Argument
unmount of /system failed; no such volume detected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system" and when i try mounting /system, CWM says Error mounting /system!
Click to expand...
Click to collapse
Hi, I experienced the same problem. Have you fixed your phone? Please give me some suggestion. Thank you.
Same problem with my Moto G 2013.
I've tried to downgrade and got problem. Now I can't flash an older motoboot.img and gpt.bin.
I'm using CyanogenMod 12, but every time when I boot, there is a line going down over the screen.
This line only disappear when I turn off and on the screen. Then everything backs to normal.
Is there a way to solve this?
This happened to me yesterday, i wento from my US Retail 4.4.4 to BR Retail 4.4.4 then via stock recovery flashing the OTA of 5.0, installed Xposed but gave me slow boots, like 5 min per boot, so i decided to downgrade, flashed 4.4.4 BR but after boot a black screen comes and doesn't go, think of flashing 4.4.2 US but the same isue, then decided to update again to 5.0 BR but stock recovery don't let me flash because an error, i flashed philz touch and do a factory reset, wipe data, cache, and everything, then flashed flashing 4.4.4 BR and then 4.4.2 US, the line down problem is nothing, only appears when you boot and, if you lock your phone for about 2-3 seconds, it dissappear (until you boot again), hope it helps, sorry for bad english
For all with bootloops, there is a major issue caused with a boot animation memory leak. Search on the forum to find the fix. You may need to delete the bootanimation binary.
skyguy126 said:
For all with bootloops, there is a major issue caused with a boot animation memory leak. Search on the forum to find the fix. You may need to delete the bootanimation binary.
Click to expand...
Click to collapse
skyguy126, I've not found any solution for this on forum.
Could you please show me a way?
For those that have problems downgrading, download this and follow this steps.
Once finished flash TWRP recovery and restore your nandroid.
Moto G not Booting, HELP
Hi everyone, I really need help with my moto G, it´s not booting into android after pressing the power button the moto logo comes up and the phone goes directly into fastboot displaying a message in pink color: version downgrade for boot
Failed to validate boot image.
I have been hours checking around for a solution and working now for the third day trying to solve the problem with no luck.
I have downloaded the original firmware for the device, tried to flash it and it doesn´t work, tried other countries firmware and they doesn´t work either.
The process will be partially ok but as it goes to flash the boot.img, recovery and system files it will give an error.
I also tried bootloader refresh, bootloader bricker and blankflash to try fix any possible bootloader issues.
The device has a locked bootloader since it is a moto g from AIO.
Please Help, It´s my only device and I cannot afford another one at this time.
There´s a few images from the flash process and device info
:crying:
You need to unlock your bootloader in order to flash various ROMs.
but in this model the bootloader cannot be unlocked it is CID 0X0010
How did this happen to your phone? What model phone do you have?
It´s a Moto G 2013, xt1032
It all begin trying to install a signed stock firmware that was supposed to be for that specific model: AIO_XT1032_4.4.2-KXB20.9-1.10-1.9_CFC_1FF.xml
During the flash process it send some error messages but the process keep running until it finishes, once the device reboot it went straight to fastboot and since then I haven´t been able to get it back working.
Are you manually flashing each partition?
Maybe try a 4.4.4 ROM.
Yes, I have. I´ve also tried other signed firmware that have a .bat file that run all by itself but neither way it worked. It comes up with the error message: Invalid signed Image and below Preflash Validation Fail
Hi Guys Need expert help !
Suddenly my Yuphoria crashed and when tried to restart it is getting stuck on YU Logo.
-able to go to fastboot mode and tried to flash latest official fast boot images using factory tools but it is unable flash and unable to mount /system /data and /cache partitions.
-as per guide from some of the threads , tried boot to TWRP and tried to repair or wipe partitions but it is giving same error and unable to mount those partition. even tried to change file system-type and that too didn't help (ext4, fat etc)
-in TWRP went to mount option and there it is showing 0mb for internal storage.
-tried to manually mount using terminal (using commands like make_ext4fs) but that also didnt help.
-Boot and recovery partitions are safe !
I think i have lost partitions or internal memory is corrupted ! if partitions are lost or corrupted anyway to rebuild or any other was to fix it ?
please please please someone help !
lately many people are facing the same problem ( including me)
did you try to flash cm 12?
BOTDeveloper said:
lately many people are facing the same problem ( including me)
did you try to flash cm 12?
Click to expand...
Click to collapse
No ! why ? is it helping you ?
Are you able to flash latest stock ROM via fastboot mode?
abhi21sept said:
Are you able to flash latest stock ROM via fastboot mode?
Click to expand...
Click to collapse
As first point in my post suggest i'm not able to !
-able to go to fastboot mode and tried to flash latest official fast boot images using factory tools but it is unable flash and unable to mount /system /data and /cache partitions.
Same problem :crying: . but its doest shows me 0mb internal storage
manthanshah16 said:
No ! why ? is it helping you ?
Click to expand...
Click to collapse
give it a try. it has worked for some people
BOTDeveloper said:
give it a try. it has worked for some people
Click to expand...
Click to collapse
tried.. didn't help ! not able to rite to System partition at all because it is not getting mounted !
guys same problem of 0 mb and my twrp recovery also got erased please tell me if any solution is there
Same issue
guys , I am also facing same issue ,rooted my phone last week and flashed with CM 13.1 ..after working a week suddenly started showing encryption error and now stuck at YU logo. when seeing in TWTP 3.0.0 internal storage 0 mb . Please help .. TIA
Guys, same problem if any one of you found the solution please do post it
Hi please try to remove your micro SD card n try twrp.Lately some micro SD cards r not compatible with twrp.. I found this using strontium 32 GB card . After removing it my TWRP 3.0.0.0 is showing normally
Same Problem
I am facing the same problem, if solution found please let me know.
Hi There,
I am also facing the exact issue that you have mentioned. Have you got any solution on this ?
BTW , are you able to install USB drivers correctly ? I am getting the message that "MTP USB device drivers are not installed properly." and getting the error "Unable to mount ....... " while flashing any new ROM. I think it is all related to Mount Point.
Same problem
facing the same issue. If anyone got a solution, please provide it.
my previously gone yuphoria is now somehow rebooting into cyanogen recovery.. but having the same problem as u guys..
plus..
1. flashing using adb sideload it gives error -- total xfer 0.0x
2. flashing using fastboot it gives no error but phone doesnt boot.. its stuck at yu logo..
mounting problem means internl storage crashed.. anyone have a fix.. i dont know **** abt this.. (mind my french)
My device is encrypted. Fistly I unlocked my bootloader. Then installed orange fox without any hassle. But hassle started when I booted to my recovery. My internal storage was encrypted. I couldn't read any folder name. I tried to wipe, format, another recovery, flashing dmverity, custom rom everything but my recovery was showing operation not permitted. Then I realized that I couldn't mount my system and vendor. I left no stones unturned but I couldn't mount my system and vendor. Then I forcefully flashed Oxygen Os. I waited more than 30 minutes. But it never booted. Then I flashed MIUI recovery zip. It booted to its previous condition as i hadn't wipe anything. Now please help me how can I solve this problem. I just don't like MIUI its too much buggy. I don't have any log or screenshot. But I found a video as same as my problem. I am attaching that video link. Plz help me. Thanks in advance. My problem's example video
How did you solve it?
Bipuldey19 said:
My device is encrypted. Fistly I unlocked my bootloader. Then installed orange fox without any hassle. But hassle started when I booted to my recovery. My internal storage was encrypted. I couldn't read any folder name. I tried to wipe, format, another recovery, flashing dmverity, custom rom everything but my recovery was showing operation not permitted. Then I realized that I couldn't mount my system and vendor. I left no stones unturned but I couldn't mount my system and vendor. Then I forcefully flashed Oxygen Os. I waited more than 30 minutes. But it never booted. Then I flashed MIUI recovery zip. It booted to its previous condition as i hadn't wipe anything. Now please help me how can I solve this problem. I just don't like MIUI its too much buggy. I don't have any log or screenshot. But I found a video as same as my problem. I am attaching that video link. Plz help me. Thanks in advance. My problem's example video
Click to expand...
Click to collapse
Did you flashed the recovery zip from the recovery itself after fastboot using a sd card or something, it will fix the issue .