Database Info

[Q] How do I root Lenovo S890 (/get MT6577 drivers installed on Win7x64?)

I searched the forums but couldn't find any answers. This is the first time I'm trying to root an android phone. Things are not going well..
I found a page in Indonesian with instruction on how to root my sister's Lenovo S890. My dad bought her one in China, we live in Europe.
We need to get all the Chinese stuff off and install a "regular" Android version with a normal marketplace (read: whatsapp and google and nothing blocked).
The page with instructions is at http://www.duniaku.net/2013/03/30/u...rtisi-internal-storage-lenovo-ideaphone-s890/ I used Google Translate.
What are the steps? First you need to set up some files such as drivers are required to carry out the process of flashing, SP Flash Tool version 3.1222 or higher, because Lenny chipset MTK6577 S890, S890 and file TWRP to also file a Super User and Busybox will be pushed into the system through TWRP. All the files you can download from the following link:
1 Download Driver Lenovo : Extract file. rar it and then click Install_Driver.exe to install drivers into the system. Rather long process, just wait.
2 Download SP Flash Tool : The author gave the newer version, which v3.1224.01. .
3 Download Team Win Recovery Project : TWRP file is specific to the Lenovo S890, so do not try for another Android, although it also MediaTek chipset.
4 Download Super User and Busybox : Will we push into the system through TWRP custom recovery. Download and copy directly to SD Storage / Memory Cards-mu. Place it outside the / root folder or USB Storage Storage SD / USB storage from your Lenovo S890.
5 Download Data Repartition : This file is optional, just download and place it in the root folder Storage SD / USB Storage. Can later be used to repartition the internal memory is too small Lenovo S890. Author will explain at the bottom.
Click to expand...
Click to collapse
I first installed the Lenovo S890 drivers. Clicked "Install anyway" for everything and rebooted. No problems.
But when I connect the phone it's still complaining that it can't find drivers (and I can't find any official drivers on the Lenovo website either)?
I also installed the MT6577 USB VCOM drivers that I found here http://forum.xda-developers.com/showthread.php?t=2206421 (before I did this the SP Flash Tool did nothing).
I enabled USB Debugging mode on the phone, and took out the SIM, the SD card and the battery when I connect it to USB to the PC. I am running Win7x64.
Every time I try to run (step 2) SP Flash tool, it starts downloading fine, but then Win7 'spits out' the phone (I can hear the 'usb device disconnected' sound) and SP Flash Tool obviously stops working then and gives some error.
I think this is because the MediaTek MT6577 USB VCOM drivers somehow refuse to install correctly? It looks like rooting might go well once this driver thing is fixed?
When I force installation of the drivers I get a Code 10 error and a yellow triangle next to the Preloader and the MediaTEL Vcom something USB driver in Windows Device Manager. ( I searched the forums and didn't find a solution for this).
I forced installation by opening Device Manager, click Add, click Add Legacy Hardware - manual - choose the usb2ser_Win764.info file out of the MT6577 USB VCOM drivers folder
This is what's in the .inf file : Is there anything I can change here to force it to work?
[Version]
Signature="$Windows NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%MTK%
DriverVer=05/30/2011,1.1123.0
[Manufacturer]
%MTK%=MTK,NTamd64
[MTK.NTamd64]
%MTK6218%=Reader,USB\Vid_0e8d&Pid_0003,USB\Vid_0e8d&Pid_1003
%MTK_COM%=Reader,USB\Vid_0e8d&Pid_0023&MI_00
%MTK_CAT%=Reader,USB\Vid_0e8d&Pid_0023&MI_02
%MTK_PRELOADER%=Reader, USB\Vid_0e8d&Pid_2000
%MTK_SP_DA%=Reader, USB\Vid_0e8d&Pid_2001
[DestinationDirs]
DefaultDestDir=12
[Reader.NTamd64]
Include=mdmcpq.inf
AddReg=Reader.NTamd64.AddReg
CopyFiles=FakeModemCopyFileSection
[Reader.NTamd64.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,usbser.sys
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
[Reader.NTamd64.Services]
AddService = usbser, 0x00000002, Service_Inst
[SourceDisksNames]
[SourceDisksFiles]
[Service_Inst]
DisplayName = %Serial.SvcDesc%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %12%\usbser.sys
LoadOrderGroup = Base
[Strings]
MTK = "MediaTek Inc."
MTK6218 = "MTK USB Port"
MTK_COM = "MTK USB Modem Port"
MTK_CAT = "MTK USB Debug Port"
MTK_PRELOADER = "MediaTek PreLoader USB VCOM Port"
MTK_SP_DA = "MediaTek DA USB VCOM Port"
Serial.SvcDesc = "USB Serial emulation modem driver"
Click to expand...
Click to collapse
How do I stop Windows from ejecting the phone (force it to keep it connected as the MediaTek thingie that seems to work with SP Flash Tool?).
Or is there a better way to get an English Android version on this phone?
When I now try to boot the phone it says
tool dl image fail
uboot is blocking by dl info
Did I (soft)brick it??
Thanks in advance for all the help!!

Giving up
Since this seems to be a less popular phone with very little support available - I'm giving up.
Spent 3 full days on this thing with no results, and I just read the GPS also won't work outside of China either.
Now all I need to do is figure out how to get it out of META mode or Factory mode, and get it to boot back into it's normal Chinese Android system.

katejones said:
Since this seems to be a less popular phone with very little support available - I'm giving up.
Spent 3 full days on this thing with no results, and I just read the GPS also won't work outside of China either.
Now all I need to do is figure out how to get it out of META mode or Factory mode, and get it to boot back into it's normal Chinese Android system.
Click to expand...
Click to collapse
Hi, I'm having a much similar problem, since I couldn't flash recovery with SP flash tool, the process was terminated unexpectedly showing error message s_ft_need_download_all_fail (4050), after a couple of days looking for a solution I decided to format the phone with SP Flash Tool, and it worked, right after I tried to flas recovery again...and it worked. I thought I had found the way but when I tried to boot the phone in recovery mode nothing happened, no matter what keys combination I use, how long I press them, the phone just won't react, it doesn't show anything on the screen.
I don't know if this was the logic step to follow, but if you want to try and discover what to do next, up to you, 4 hands are better than 2,maybe yuo find the solution.
Good luck.

There is no button combination to boot recovery, try droidgram-reboot on play store.
Sent from my Lenovo S880

Hope you guys manage to root it soon as I am one of those who waiting for it as I need to root my S890 also.
Sent from my Lenovo S890 using xda app-developers app

katejones said:
I searched the forums but couldn't find any answers. This is the first time I'm trying to root an android phone. Things are not going well..
I found a page in Indonesian with instruction on how to root my sister's Lenovo S890. My dad bought her one in China, we live in Europe.
We need to get all the Chinese stuff off and install a "regular" Android version with a normal marketplace (read: whatsapp and google and nothing blocked).
The page with instructions is at http://www.duniaku.net/2013/03/30/u...rtisi-internal-storage-lenovo-ideaphone-s890/ I used Google Translate.
I first installed the Lenovo S890 drivers. Clicked "Install anyway" for everything and rebooted. No problems.
But when I connect the phone it's still complaining that it can't find drivers (and I can't find any official drivers on the Lenovo website either)?
I also installed the MT6577 USB VCOM drivers that I found here http://forum.xda-developers.com/showthread.php?t=2206421 (before I did this the SP Flash Tool did nothing).
I enabled USB Debugging mode on the phone, and took out the SIM, the SD card and the battery when I connect it to USB to the PC. I am running Win7x64.
Every time I try to run (step 2) SP Flash tool, it starts downloading fine, but then Win7 'spits out' the phone (I can hear the 'usb device disconnected' sound) and SP Flash Tool obviously stops working then and gives some error.
I think this is because the MediaTek MT6577 USB VCOM drivers somehow refuse to install correctly? It looks like rooting might go well once this driver thing is fixed?
When I force installation of the drivers I get a Code 10 error and a yellow triangle next to the Preloader and the MediaTEL Vcom something USB driver in Windows Device Manager. ( I searched the forums and didn't find a solution for this).
I forced installation by opening Device Manager, click Add, click Add Legacy Hardware - manual - choose the usb2ser_Win764.info file out of the MT6577 USB VCOM drivers folder
This is what's in the .inf file : Is there anything I can change here to force it to work?
How do I stop Windows from ejecting the phone (force it to keep it connected as the MediaTek thingie that seems to work with SP Flash Tool?).
Or is there a better way to get an English Android version on this phone?
When I now try to boot the phone it says
tool dl image fail
uboot is blocking by dl info
Did I (soft)brick it??
Thanks in advance for all the help!!
Click to expand...
Click to collapse
please use S890_Customized_SP_Flashtool_20121119(v3.1238.5)
flash again ok
i am solve same your problem
https://www.dropbox.com/s/pwvg553v5z1vtju/S890_Customized_SP_Flashtool_20130109(v3.1238.5).rar

kyaw8719 said:
please use S890_Customized_SP_Flashtool_20121119(v3.1238.5)
flash again ok
i am solve same your problem
https://www.dropbox.com/s/pwvg553v5z1vtju/S890_Customized_SP_Flashtool_20130109(v3.1238.5).rar
Click to expand...
Click to collapse
Thanks for sharing. Is it 100% working or still in testing phase?
Sent from my Lenovo S890 using xda app-developers app

nakTT said:
Thanks for sharing. Is it 100% working or still in testing phase?
Sent from my Lenovo S890 using xda app-developers app
Click to expand...
Click to collapse
i fix 2pcs

kyaw8719 said:
i fix 2pcs
Click to expand...
Click to collapse
Meaning?
Sent from my ST26i

doesn't solve the problem
nakTT said:
Meaning?
Sent from my ST26i
Click to expand...
Click to collapse
It doesn't work same problem downloaded the latest SP Flash from the post doesn't work either.. Is there any of you solved the problem? If so then please go detailed about it.

[Q] install Goophone i5 USB VCOM driver (help)

Hello everyone,
My phone: Goophone i5 mtk 6577
i m from turkey, sorry for my english.
i cant install USB VCOM driver.
i did them:
1) i cleaned up my PC from all possible old MTK VCOM entries
2) i switched off my phone
3) i must eject battery. but, i cant eject phone battery because my phone like iphone.
4) and i connected phone to PC but MT65xx preloader show 2-3 second and my phone unplugged automatically.
You can watch the video for see the problem.
www(DOT)youtube(DOT)com/watch?v=J5ukZdMrQ2s
Please help me.

please help
up

[Q] MTK phone issues - can't get vcom drivers to install

I've followed every tutorial. When I delete the device (and the driver) through either device manager or USBDeview the driver comes up as the standard MTK USB port rather than the VCom Driver... Even when I explicitly install the VCom driver it still comes back as MTK USB.
I just messed up the rom for my MTK phone, but I have another phone (exact same model). Is there a way I can just clone the other phone and skip all this nonsense?

[GUIDE I9500] [SOLVED] MTP device driver error 10 FIX

Please notice: this has been done on i9500 device. you can try it on your i9505 it 100% not dangerous, but I dont know if its working
Well im using i9500 custom rum running android 4.2.2 and I had a problem: whenever i connect my phone to PC it says: "unknown device MTP device driver error 10 device can not start."
METHOD 1:
**make sure your device is disconnected from the PC.
** make sure that usb debugging is enabled (go to 'developer mode')
1) Open Xposed Installer and go to Framework and UNINSTALL it.
2) reboot your phone. (NOT soft reboot- full one).
3) On your PC, go to "driver manager" and under "universal drivers" section, delete "unknown device". (right click-> delete)
4) restart your PC.
5) connect your PC to the computer, it should work now.
6) you can now reinstall Xposed module. reboot your phone (again- not soft reboot) and reconnect it to your PC just to make sure its still working)
METHOD 2:
STEP 1
**MOST CRITICAL: Update ALL your PC drivers using driver software I personally use 'advanced optimizer pro'. UPDATE YOUR BIOS AS WELL! [/COLOR]
- Update drivers using a software.
-Update your bios.
-Download windows updates (start->type 'windows update' in search bar, click on 'windows update'-> 'check for updates'. dont forget to check optional update as well').
dont forget to restart!
now after you are sure both bios and drivers are up to date, try the following
STEP 2/2
- I downloaded and installed samsung drivers
-Try to connect your phone with ANOTHER cable.
-Try to connect your phone to ANOTHER port (this can indicates where the problem is: maybe the cable/port is corrupt)
-I tried deleting ALL samsung drivers and reinstall
-tried connecting my old s1 i9000. try to connect another phone to see where is the problem- phone or maybe computer.
-try to connect phone while its in 'download mode' and recovery mode.
-try running windows error kit.
-download Android ToolKit.
- if non of the above are working, you can always try FULL WIPE+ REFLASH ROM . (or try flashing another rom).
*if its still not working ever after performing all the steps above under method 2, try restart your PC and try Method 1 AGAIN WITH A DIFFERENT PORT AND CABLE. there might be a chance that you have a 'combined' problem (several issues that preventing from your MTP driver to work properly.
After downloading drivers you can be sure 100% ALL YOUR PC DRIVERS ARE PERFECT, try Method 1 again.
METHOD 3
***Coming soon on next update
worked for me with:
custom android 4.2.2 OzcanRom all version including v5.0 according to sep 20 2014.
stock kernel. no system files have been ever modified
working with android 4.1 and above.
Windows 7 SP1 64bit Updated Sep10 2014.

Hi!
on method 1. under device manager, I can't seem to find the UNIVERSAL DRIVER. are you refering to Universal serial bus controller?
thanks!
Edit: sorry I thought you are referring to device manager. anyway where can i find the driver manager? i'm using windows 7
thanks!

wolper13 said:
Hi!
on method 1. under device manager, I can't seem to find the UNIVERSAL DRIVER. are you refering to Universal serial bus controller?
thanks!
Edit: sorry I thought you are referring to device manager. anyway where can i find the driver manager? i'm using windows 7
thanks!
Click to expand...
Click to collapse
yup im talking about the device manger. i will update the thread soon.
you may find one of the following with an error:
1) universal bus controller.
2) MTP driver failed
try to update both of them or uninstall them

tomorrow i will upload METHOD 3
plus method 4 is on its way..

Method 1 No5 -typo
You will connect your phone to the PC, not the computer to the PC...
Also, updating a BIOS is not straight toward and can cause a bricked pc. Be careful advising people to do that

Soft bricked Panasonic P81

Hi Friends,
This is my first post at XDA.
I unfortunately bricked my Panasonic P81 after rooting it and adding XHalo app and the boot manager app from the Xposed Framework.
The situation is as follows-
I can get to the logo, it screams Panasonic and then doesnt boot. I dont have CWA installed and worse, my SD card which had my stock backup is also lost. This means I need a mechanism to stock recover and perhaps flash boot.img and recovery.img?
I am stuck at this point, not sure how to proceed. I can get to recovery, have cleaned cache, backed up user data ,done a factory reset. Even after factory reset it still cant boot.
Please help me with a step-by-step instruction to recover, this phone is dear to me. How do I flash?(boot.img or rom) I have downloaded Sagar Patel's (good bless him!) backup and the images, but need guidance on how to flash and recover.
Please help friends and apologies for any incovenience. I am still a newbie

Guys please help!!

Driver-USB-PC connection problem
kartik.krish said:
Guys please help!!
Click to expand...
Click to collapse
Hope drivers are installed properly in your pc.
If you are going to use sp flash tool, Make sure SP flash tool is set to auto-detect com port, not manual selection
If you find that it is driver problem, following may help you.
Please note that there is nothing that much hard in driver installation as it is just to connect your device with your pc but because many users still face problem of driver installation, you can try following tricks!!!
It is observed by me that driver installation and adb interface problem do not happen in windows XP as eventually and generally it is happened in windows 7 and later…so, you can simply try on windows xp if you are able to do so…(you can use dual operating system too!!! Or good relation with neighbor/friends/colleagues/someone/all can be beneficial here!!!)
Note that all tricks here are not necessary to work, but it may still work for you….
Take one by one step, if the first step does not work for you, only then try next step. This is not all steps to be taken at once type guide…This is simply Try and error type tutorial/tricks…
There are following problems I have come to know regarding to driver installation and conflicts:-
Device is charging through usb cable but there is no usb option displaying on either device or no driver installation box/message/pop up appears in pc….
Missing sound of that usb-pc connection
Sound of disconnection after couple of seconds of connection
Adb interface is missing
Ok, sometimes changing usb connection type for example, from mass storage or mtp to camera, ptp, usb tethering or something else can bring adb interface…..
Try with different USB Cable. You can use original nokia or samsung tiny cable instead of cable having long length. Sometimes, length matters!!!!
Try in different USB Port.
Sometimes, you have to disable signature verification in your pc for proper installation of driver.
Had you disabled your antivirus before downloading, installing and while running your tools/softwares? You may need to do so…
Have you installed the software (or say, all associated softwares/tools) in C-System drive?, if not, then you should first install required software/tools in system drive that is usually C drive in Microsoft-Windows OS…or try after installing them on desktop.
Keep all necessary files/tools (driver files, flash tools, rom etc…) on desktop.
Download proper driver According to your model/device, According to chipset inside, According to Official site of manufacturer, Official site of chipset, through PC Suite/flash program of your device…
If the problem still not solve, you should try all available driver packages of your device one by one whether from official site of chipset inside your device, or any forum, adb, pdanet+ or foxfi, universal driver, VCOM Port driver, drivers from hexamob through play store, and find all possible packages and see if someone make positive result after installation…
If the problem still not solve, you should install remaining update packages of your system (PC) including all primary, secondary, essential, Non-essential updates….whatever, just install them all….reboot your pc…and see if problem is solved….
If you can connect the device but somehow found that device driver still not installed properly, just go to device manager in your pc, click on portable device, right click on your device and apply “Update driver”. Click on “automatically search” when a window prompt ask you.
If the problem still persists then,
Just remove all the drivers using usbdeview (I have given link also to download usbdeview in earlier post)
https://drive.google.com/folderview?id=0B511A2txfpAPbmwtQXZqbnVlT1U&usp=sharing
Install usbdeview and remove all the drivers
You can also fix this by showing the nonpresent devices in devicemanagement (google for show nonpresent devices for explanation)
Go to com ports, and delete all mediatek drivers except preloader driver. Now start over. It can help if you choose the same usb port where you had success last time.
Use Usbdeview to uninstall all the drivers before connection, restart the pc, Extract and keep driver zip files and other useful files/tools on desktop…just start your tool… and try to perform your tasks like backup…or restoring the backup…without worrying about that sound of disconnection you may listened after couple of seconds of connection or don’t even worry if you are just missing that sound of usb-pc connection….just try on your tool…
If still problem of driver installation persists, then simply use usbdeview and uninstall all drivers, restart your pc and try following steps:-
There are various ways to install proper drivers at the time of connecting the device with pc depending upon how you connect it.
Follow the procedure both with and without battery
Simply plug in via USB Cable
Connect by holding volume down button
Connect by holding volume up button
Connect by holding Power button
Connect by holding power and volume down
Connect by holding power and volume up
Connect by holding both volume up and down button
Connect by holding thrice volume up, down and power button
Connect by holding power and home button
Connect by holding power and menu button
Remember which method works and which drivers are installed
in LAN-Devices you may have different android device
Select/set drivers by hand and use the mtk usb driver, now Flashtool finds the phone
Suppose holding volume down method without battery works for you then what next you have to do is as below:-
1.TAKE THE BATTERY ,SD ,SIM OUT OF THE PHONE
2.HOLDING VOLUME DOWN CONNECT IT TO PC VIA USB(ONCE YOU HEAR A SOUND FROM PC YOU CAN RELEASE VOLUME DOWN)
3.OPEN DEVICE MANAGER(ON COMPUTER SEARCH IT OR CONTROL PANEL)
4.WAIT FOR 2-3 MINUTES
5.YOU WILL HEAR A SOUND & OTHER DEVICE WILL BE DISPLAYED
6.IN OTHER DEVICES ->MT65XX PRE-LOADER
7.RIGHT CLICK MT65XX PRELOADER
8.UPDATE DRIVER
9.LOCATE THE DRIVERS PROVIDED ACCORDING TO YOUR OS(VISTA,WIN7,XP)
10.IT WILL DO ITS STUFF
Install Mediatek drivers, preloaders, VCOM port etc…
Manually Install MediaTek USB VCOM Drivers
Requirement:-
1. Download MediaTek USB VCOM Drivers
2. Download USBDeview
Here is the link from you can get it:-
https://drive.google.com/folderview?id=0B511A2txfpAPbmwtQXZqbnVlT1U&usp=sharing
Procedure
(* Note: You might need to disable drivers signature verification in Windows for this to work smoothly.
If you want to turn off device driver signing in Windows completely, do the following.
Windows 7:-
1. Hit the Win+R keys together to open the run dialog
2. Type gpedit.msc to open the local groups policy
editor
3. Expand ‘Administrative Templates’ (it’s under ‘User Configuration’)
4. Expand ‘System’. Click ‘driver Installation’
5. In the right panel, double click on ‘Code Signing for Device Drivers’
6. Choose ‘Enabled’ in the window that appears.
7. In the underlying options, choose ‘Ignore’
8. This disables drivers signing in Windows 7, and now you can install unsigned drivers in Windows 7.
9. Click Apply, OK. Restart your computer to install unsigned drivers
Windows 8
1. Hold down the Windows key on your keyboard and press the letter C to open the Charm menu, then click the gear icon (Settings)
2. Click More PC Settings
3. Click General
4. Under Advanced Startup, click Restart Now
Note: In Windows 8.1, the ‘Restart Now’ button has moved to ‘PC Setting -> Update & Recovery -> Recovery.’
5. After restarting, click Troubleshoot
6. Click advanced options
7. Click Windows Startup Settings
8. Click Restart
9. After restarting your computer a second time,
choose Disable driver signature enforcement
from the list by typing the number 7 on your Keyboard Your computer will restart automatically.
10. After restarting, you will be able to install
unsigned drivers normally; however, Windows
will display a warning message. When the
warning appears, click Install this driver
software anyway. )
1. Install USBDeview and use it to uninstall all Vcom, Mediatek and Preloader drivers
1b. Extract the contents of the Mediatek USB VCOM file
2. In Windows, go to Control Panel and open Device Manager
3. Click any of the device groups (any of the items on the list) you see there, and then from Action menu, select Add legacy hardware
4. Add hardware wizard will be opened, click next
5. Select Install the hardware that I manually select from a list (Advanced)
6. Click next two times and click Have Disk button
7. Click browse and find where your driver's .inf file is, then select it (the .inf you'll select is located in drivers > USB Vcom driver > your OS) . Ensure to select the 64 bit .inf if your PC is 64 bit
8. Click Open and OK. You will see the drivers listed.
9. Select your driver there (select Mediatek Preloader USB VCOM Port)
10. Click Next and finish installing
11. If SP flash tool or other software still dont detect your phone then also install Mediatek DA VCOM (consider installing more from the list of drivers one at a time if need be)
Try in different PC
Sometimes windows XP works when windows 7 fails!!!
Case:-
It did the same thing with my MT6577 (Wiko Cink PEAX), so I connected it with a battery and without holding VOL+. Then "MT65xx preloader" appeared in device manager then disappeared (once). It is normal that it disappears. When you start Flash_tool and when you click Download (or whatever you want to do) THEN you connect the phone (in off state), and the flash operation will succeed.
Guess what? Once my Panasonic P81 could install driver and got detected after approx. 5 hours of continuous connection with win 7 x64!!! Meanwhile, I tried first usbdeview and then manually installation of mediatek driver but manual installation had failed as my p81 was only charging when it was connected with pc….So, mediatek – windows 7 conflicts….but, when I tried tiny (very small) nokia usb cable, it works instantly…
If you ever meet problem when you connect your android with your pc via usb cable and find that your android is charging but could not recognize or there isn’t that options of “USB connection” then just disconnect your android, power off it, remove battery, connect it without battery with your pc through usb, let it have some time to recognize your android or hear that voice of “usb connection” you were just missing…after that, insert battery and switch on your android…you are done!!!
Sometimes removing both sim cards and battery and then re-inserting them after a couple of seconds also works.
Try with different USB Cable
Try in different USB Port
Try in different PC
Sometimes windows XP works when windows 7 fails!!!
Use usbdeview to remove all the usb devices and then add your device
Find proper driver of your device:-
https://drive.google.com/folderview?id=0B511A2txfpAPbmwtQXZqbnVlT1U&usp=sharing

panasonic p81 soft bricked
SP flash tool detected my P81 mobile
but i need rom ROM files to flash
please any one give me rom file to flash Panasonic P81 with SP flash tool

problem solved?
I also had similar problem & solved it. Tell me if the problem is no solved.

damn i don't know what the hell is going on inside my computer but i am not able to get those drivers or i don't know what's the problem. please help me where to get drivers for my panasonic p81 mobile. it is softbricked and i want to install stock rom and i have that cpb files but that ygdp tool isn't working i am in total chaos.
help me please

kartik.krish said:
Yo! I had bricked it too and that too by Xhalomulti window cuz app window is sh!t..... be cool .there is stock rom available at www.xdafirmware.com....google it....also You will recieve a .zip... extract to get .cpb file and use YGDP (assembly:: if ask for password at ygdp type 369)......tap config select cpb. Wait ...connect usb and click start........ok tutorial on Internet.... IMPORTANT THING:: YOU'LL NEED MTK VCOM DRIVER PR ELSE IT WON'T WORK.
Sent from my Panasonic P81 using XDA Labs
Click to expand...
Click to collapse

Thanks so much mate! I fixed with the help of friends at XDA. Which ROM performs best on P81 which runs L or M? I am still on stock and need to upgrade. Do you have suggestions?

kartik.krish said:
Thanks so much mate! I fixed with the help of friends at XDA. Which ROM performs best on P81 which runs L or M? I am still on stock and need to upgrade. Do you have suggestions?
Click to expand...
Click to collapse
Brother I am tired of finding any rom other than stock.on internet there is miui 6 but most people complained it damaged their devices....no cyanogen OS,Color os ,Aokp,Ressurection remix,paranoid nothing........ok i found a phone named Doogee Dagger DG550 having same spects but better ui than playmore and that recently got kitkat too. Im thinking of trying it..if it fails i've
Panasonic original (ok modded a bit) firmware i can flash from ygdp tool..... actually Panasonic P81 is nothing but clone of coolpad 7320 with cool show replaced by playmore and the gesture is new....same multiwindow and the music cafe is nothing but coolpad music renamed....literally im using 7320 rom with build. prop changed so on apps it shows im using p81........Ok if you find rom please post link..... Ps ive tried roms on www.needrom.com but is hopeless.
Sent from my Panasonic P81 using XDA Labs
---------- Post added at 04:39 AM ---------- Previous post was at 04:34 AM ----------
kartik.krish said:
Thanks so much mate! I fixed with the help of friends at XDA. Which ROM performs best on P81 which runs L or M? I am still on stock and need to upgrade. Do you have suggestions?
Click to expand...
Click to collapse
In my opinion MIUI is best because it has a self large community like xda and launch updates per month so many that you will fed up installing them.....if you download and install one update you will be amazed that it will say 3 more system updates pending......and if you complain a bug next month it got fixed.....only thing is to find one...
PS don't download the miui 6 for p81..complained by many p81 user that it hard bricked the device.
And that miui is not official i.e. some developer made his own one and DO not tested that it works or not......
Sent from my Panasonic P81 using XDA Labs

Sir,My Panasonic eluga s is soft bricked, Not starting by pressing any key..it only Starts when connected to PC or charging.. That too in Fastboot mode.. While installing stock ROM using YGDP tool,I am not able to get my mobile in download mode..pls guide..

my panasonic p81 is hard brick,it is not detecting in pc by vcom and other drivers even not booting or charging,please help me devs.

I am connecting my p81 with my sound system but now i cannot hear the voice over a call properly plzz help me out