Any idea of downgrading to 5.0.2 from 5.1.1. I want to downgrade because, my 3G service has been stopped when I upgrade from OTA to 5.1.1.
Official downgrade via odin is not possible. Either you try to solve the issue on 5.1.1 by flashing different firmwares or you go for a custom 5.0.2 Rom.
never do that because 5.1.1 has updated bootloader which will cause problems if u flash downgraded rom
im not sure if u can downgrade bootloader version and how to do this .... but i think if u downgraded the boatloader u can flash 5.0.2
i have Galaxy G9200 HK
i success downgrade it from 5.1.1 to 5.0.2
1.first i downgrade kernel from 5.1.1 to 5.0.2 (made .tar archiwe with only boot.img this ROM http://rom.shuaji.net/rom/6783.html Pingpongroot possible)
2. Now Galaxy S6 is wiped
3. install from ODIN this rom http://rom.shuaji.net/rom/8085.html ( not working on it pingpong root)
For root need again install pingpong root kernel possible, root and again back to kernel from rom http://rom.shuaji.net/rom/8085.html
USE IT ON your responsibility & IF your phone no start or method don't working .you know how install back 5.1.1 from samsung smart switch!
XxM4tzexX said:
Official downgrade via odin is not possible. Either you try to solve the issue on 5.1.1 by flashing different firmwares or you go for a custom 5.0.2 Rom.
Click to expand...
Click to collapse
Is it possible to flash this one: [ROM]-[S6.G920F] VN™ROM-S6-G920FXXU1AOE3 ??? This is 5.0.2.
Sure you can flash this. But keep in mind that Knox will be tripped.
galaxyuserx said:
i have Galaxy G9200 HK
i success downgrade it from 5.1.1 to 5.0.2
1.first i downgrade kernel from 5.1.1 to 5.0.2 (made .tar archiwe with only boot.img this ROM http://rom.shuaji.net/rom/6783.html Pingpongroot possible)
2. Now Galaxy S6 is wiped
3. install from ODIN this rom http://rom.shuaji.net/rom/8085.html ( not working on it pingpong root)
For root need again install pingpong root kernel possible, root and again back to kernel from rom http://rom.shuaji.net/rom/8085.html
USE IT ON your responsibility & IF your phone no start or method don't working .you know how install back 5.1.1 from samsung smart switch!
Click to expand...
Click to collapse
You sure the link is safe? I've tried to use FireFox or Chrome but they both reported "The site contains malware" warning......
I doubt your 3g problem has anything to do with 5.1.1. Check the APN settings or go to a store.
XxM4tzexX said:
Official downgrade via odin is not possible. Either you try to solve the issue on 5.1.1 by flashing different firmwares or you go for a custom 5.0.2 Rom.
Click to expand...
Click to collapse
Zhypr said:
I doubt your 3g problem has anything to do with 5.1.1. Check the APN settings or go to a store.
Click to expand...
Click to collapse
My APN setting is alright. When I purchase this phone, my 3G was Ok but after one upgrade from OTA my 3G problem arises. So I think if I roll back to 5.0.2 my 3G problem will gone.
rony0505 said:
My APN setting is alright. When I purchase this phone, my 3G was Ok but after one upgrade from OTA my 3G problem arises. So I think if I roll back to 5.0.2 my 3G problem will gone.
Click to expand...
Click to collapse
The update can be the occasion, but it's not the problem. You shouldn't accept your flagship phone to be stuck on 5.0.2. Just contact the shop you bought it form.
TheEndHK said:
You sure the link is safe? I've tried to use FireFox or Chrome but they both reported "The site contains malware" warning......
Click to expand...
Click to collapse
Site don't working now :/ but this instruction can work with another ROMs 5.0.2 i downloaded my roms from this site but now ...
I see this warning. I ignore it and see broken website :|
galaxyuserx said:
Site don't working now :/ but this instruction can work with another ROMs 5.0.2 i downloaded my roms from this site but now ...
I see this warning. I ignore it and see broken website :|
Click to expand...
Click to collapse
Does this method trip knox?
TheEndHK said:
Does this method trip knox?
Click to expand...
Click to collapse
My phone have 0x0 KNOX you know i used only orginal samsung kernels from stock ROMs and stock ROMs ;]
galaxyuserx said:
My phone have 0x0 KNOX you know i used only orginal samsung kernels from stock ROMs and stock ROMs ;]
Click to expand...
Click to collapse
I'm also with HK G9200 and actually I want to go back 5.0.2 with pingpong root. Can you upload that kernel and rom on baidu cloud and share to us?
TheEndHK said:
I'm also with HK G9200 and actually I want to go back 5.0.2 with pingpong root. Can you upload that kernel and rom on baidu cloud and share to us?
Click to expand...
Click to collapse
i can't verify account on baidu because i don't have chinese phone number but i have rom
G9200ZHU1AOF1_G9200ZZH1AOF1_G9200ZHU1AOF1_HOME.tar
and kernel from Lřđă SM-G9200 5.0.2 LRX22G.G9200ZHU1AOE4.tar
install first kernel from 5.0.2 it crash system 5.1.1
after that G9200ZHU1AOF1_G9200ZZH1AOF1_G9200ZHU1AOF1_HOME.tar
and again kernel from LRX22G.G9200ZHU1AOE4
now you must in pingpong boot actualisation in program and try root.
and after you success rooted you can back to kernel from G9200ZHU1AOF1_G9200ZZH1AOF1_G9200ZHU1AOF1_HOME.tar
for me it worked and i think you can find this roms on google or baidu.
http://www22.zippyshare.com/v/dj07iRfw/file.html < kernel from "Lřđă SM-G9200 5.0.2 LRX22G.G9200ZHU1AOE4.tar"
with that you need only "G9200ZHU1AOF1_G9200ZZH1AOF1_G9200ZHU1AOF1_HOME.tar" rom
hope it can help you.
I now have KNOX tripped, because i want use USB wifi dongle :]
i found on chinese website i think baidu nice kernel for 5.1.1 ( rooted + KNOX removed) but no support usb dongle and without source code this kernel i can't use 5.1.1 now use again 5.0.2 but with TWRP
Ok guys, I have a question.... I have S6, model 920T, Tmobile.... I got a message to said: "the phone has been flased and is lock now you need to reboot and contact your carrier"..... somenthing like that.., I was looking on internet a lot of information, I found one page where I can check the IMEI number, and it said the IMEI# that is in the back and is from 920F, International.... my IMEI # on the phone is corrupted, I already tryed to changed to 920F to see if it can help me with IMEI # but I cant.... any solutions????? Im stock on 5.1.1. And I cant dowgrade either..... please need you all help.... sorry for my english, Im Mexican...
Related
So with trying to help and give back to the community I'm going to post my recent flashing experience.
So here's a little history.. I have a N900W8 from MTS. (Manitoba Telephone System).
Couple months back when the Tel Cel base came out I wanted root so I flashed using the following guide.
-- http://forum.xda-developers.com/showthread.php?t=2614772
This worked out well and the stock rom w/ root was very stable, CWM boot loader..
So now that this new build 'NB7' came out it got me itching to flash again.. LoL
I met all the requirements for 4.4.2 boot loader and such so I decided to flash xnote13 w/ civ snapkat kernel.
This setup worked well.. The rom had a few glitches but was very quick and the best of all I could change the DPI.
I didnt setup the rom 100% as I was feeling it out. After a day or so I decided to flash to stock NB7 and then flash xnote13 again so I can have the updated NB7 modem.
Oh Man.. This is where the fun begins.. So I hit up sammobile and grabbed the latest rogers rom as I noticed all the Canadian roms used the same PDA/CSC/MODEM.
-- http://www.sammobile.com/firmwares/3/?download=26660
PDA: N900W8VLUCNB7
CSC: N900W8OYACNB7
MODEM: N900W8VLUCNB7
I take this rom, flash it on my phone via Odin.. What I notice is the model# and build change to reflect NB7 but the baseband was still MJ4.
I flash 2-3x and still no change.. I'm like wtf..
At this point I'm confused as to why I cannot upgrade this baseband.
I then decided to flash the CSC from the guide I used earlier. As I had a multi-csc installed from when I had flashed Xnote13.
-- http://forum.xda-developers.com/showthread.php?t=2614772
After this I flashed the NB7 rom again via Odin and boom. The baseband reflected NB7.
I noticed my phone had a few Bell apps. When I looked into this I found out its due to the CSC. I tried the method mentioned in most posts *#272*YOURIMEI# but this wouldnt work. I would get instant error messages.
I then found this app on google play which people mentioned having success with.
-- https://play.google.com/store/apps/details?id=com.manniakk.cscselector
I used this app w/ root I was able to bring up a list of the CDN CSC codes. Whats funny is there is no list anywhere on the internet that has what CSC code belongs to which provider.
By going through sammobile and using some good guessing I was able to figure out what most of them are with some exceptions.. I couldnt find MTS...
I ended up choosing MTA and rebooted my phone but sure enough Bell apps were still there.. Tried a few more things and couldnt get past that so I just said forget it.
I decided to keep the Stock NB7 4.4.2 rom w/ root... I frooze all that Bell **** and there's no branding whats so ever.
The rom is working flawless. During this process I rooted the phone multiple times and flashed the NB7 rom multiple times via Odin. At no point did my Knox trip..
As of right now I have CWM as the bootloader and Knox is still 0x0.
Sorry for the long read.. If you have any questions lemme know.
ReDz
Can you help me with rooting my phone? There's too much guides out there for specific models so it confuses me lol. My Note 3's model is the N900W8, running on KitKat 4.4.2, kernal 3.4.0-859721, and the baseband # is N900W8VLUCNB7. I just want to root it so I can remove all the bloatware. I don't plan on adding any ROMs to it unless it's close to looking like stock because I still want the SPEN features without all the fancy stuff
Doodless said:
Can you help me with rooting my phone? There's too much guides out there for specific models so it confuses me lol. My Note 3's model is the N900W8, running on KitKat 4.4.2, kernal 3.4.0-859721, and the baseband # is N900W8VLUCNB7. I just want to root it so I can remove all the bloatware. I don't plan on adding any ROMs to it unless it's close to looking like stock because I still want the SPEN features without all the fancy stuff
Click to expand...
Click to collapse
I've replied to your other thread in Q & A, but if you just want to root, flash this file using odin. It might or it might not trip Knox on your phone. Make sure reactivation lock is off before flashing.
Doodless said:
Can you help me with rooting my phone? There's too much guides out there for specific models so it confuses me lol. My Note 3's model is the N900W8, running on KitKat 4.4.2, kernal 3.4.0-859721, and the baseband # is N900W8VLUCNB7. I just want to root it so I can remove all the bloatware. I don't plan on adding any ROMs to it unless it's close to looking like stock because I still want the SPEN features without all the fancy stuff
Click to expand...
Click to collapse
Do you try with towelroot ?
zelenko said:
Do you try with towelroot ?
Click to expand...
Click to collapse
I already have and it doesn't work
Hello everybody
I want to upgrade to Android 5.1.1 without tripping KNOX. Is there a way to upgrade via FlashFire? I heard that is not possible because the new bootloader has a write protection (only downgrade is not possible anymore).
My current rom is G920FXXU1AOE3 rooted with PingPong-root.
Thanks in advance
Saafir said:
You can unroot and upgrade without tripping knox. Although the only working root method for 5.1 is a slightly modified stock kernel (to my knowledge) which in turn will trip your knox. And yes, you're correct, once upgraded to 5.1 you cannot downgrade without special equipment.
Click to expand...
Click to collapse
I thought so. Hmm what if I try to flash the full stock firmware G920FXXU2BOFJ (DBT) over FlashFire with the EverRoot option and flash the bootloader via Odin?
Saafir said:
I can't answer that with certainty but sounds good in theory. Awfully risky shot in the dark though ;(
Click to expand...
Click to collapse
Unfortunately it doesn't work. I'm stuck now on Android 5.1.1 unrooted ??
A downgrade doesn't work even if I repackaged the firmware file (with 5.1.1 bootloader and 5.0.2 system, kernel and modem etc). It stops while flashing kernel... ?
For those who failed to root, have a look at this one: https://www.youtube.com/watch?v=5qL9qKbQa54 It helped me rooted my S6 with Android 5.1.1 and Knox is still OK
molanjami said:
For those who failed to root, have a look at this one: https://www.youtube.com/watch?v=5qL9qKbQa54 It helped me rooted my S6 with Android 5.1.1 and Knox is still OK
Click to expand...
Click to collapse
Your link is broken and i highly doubt it was legit.
There are still no known way to root in 5.1.1 without tripping the knox counter, sorry.
- Renolz
renolz said:
Your link is broken and i highly doubt it was legit.
There are still no known way to root in 5.1.1 without tripping the knox counter, sorry.
- Renolz
Click to expand...
Click to collapse
Yes i also checked the video is no more on youtube . sorry folks
Hi,my galaxy s6 is on version 5.1.1 with the G920FXXU2BOGG firmware and I want to root it but don't know the right method.I know that there is already a method on how to root galaxy s6 on 5.1.1 but does it support my firmware?because it is made to root the first 5.1.1 firmware or it supports all galaxy s6 5.1.1 firmwares?
hlm19 said:
Hi,my galaxy s6 is on version 5.1.1 with the G920FXXU2BOGG firmware and I want to root it but don't know the right method.I know that there is already a method on how to root galaxy s6 on 5.1.1 but does it support my firmware?because it is made to root the first 5.1.1 firmware or it supports all galaxy s6 5.1.1 firmwares?
Click to expand...
Click to collapse
Only way to get root on 5.1.1 thus far is by flashing TWRP recovery.
If you are an amateur to this sort of thing I would highly suggest not to do that.
It will void your warranty permanently by tripping KNOX which can't be "un-tripped"
May I ask why you think you need/want root?
I want to root my galaxy s6 as I see some good custom roms and want to try them.I've had some android phones before like the galaxy note 4,galaxy note 3,htc one m8 and galaxy nexus and rooted them.Just curious on how to root my gs6 with the XXU2BOGG firmware.Does the 5.1.1 root method supports my firmware?
hlm19 said:
I wan't to root my galaxy s6 as I see some good custom roms and want to try them.I've had some android phones before like the galaxy note 4,galaxy note 3,htc one m8 and galaxy nexus and rooted them.Just curious on how to root my gs6 with the XXU2BOGG firmware.Does the 5.1.1 root method supports my firmware?
Click to expand...
Click to collapse
Okay then, as long as you aware of the risks..
Rooting isn't device dependent, it's just software. It's supported on any firmware as long as you have TWRP installed. It just installs SuperSU for you into the system files.
http://forum.xda-developers.com/galaxy-s6/orig-development/twrp-t3080940
Pretty sure TWRP is supported on all models of S6/Edge, they all share the same hardware as each other.
Just flash it with Odin version 3.10.6.
Grab it here ZeroFLTE represents all S6 models except Sprint model which require their own special one (no idea why)
You then follow the Odin install method, making sure you're using 3.10.6. Otherwise more than likely will not work.
After installation of TWRP and then booting into TWRP you will be faced with the "SuperSU is not installed, would you like to install it?"
.. And done.
Er, actually I think that appears when when you go to restart via TWRP menu
But yeah.. best of luck, don't blame me if your phone explodes into a fire ball that goes nuclear and destroys the world.. Or simply bricks it
Edit: Wait are you talking about the Chainfire root method? If you are you may as well not even consider that if you're planning on custom firmware installs.. TWRP is your best bet because it isn't device/firmware specific like CF. And you need TWRP for firmware installs anyway..
Stevles said:
Okay then, as long as you aware of the risks..
Rooting isn't device dependent, it's just software. It's supported on any firmware as long as you have TWRP installed. It just installs SuperSU for you into the system files.
http://forum.xda-developers.com/galaxy-s6/orig-development/twrp-t3080940
Pretty sure TWRP is supported on all models of S6/Edge, they all share the same hardware as each other.
Just flash it with Odin version 3.10.6.
Grab it here ZeroFLTE represents all S6 models except Sprint model which require their own special one (no idea why)
You then follow the Odin install method, making sure you're using 3.10.6. Otherwise more than likely will not work.
After installation of TWRP and then booting into TWRP you will be faced with the "SuperSU is not installed, would you like to install it?"
.. And done.
Er, actually I think that appears when when you go to restart via TWRP menu
But yeah.. best of luck, don't blame me if your phone explodes into a fire ball that goes nuclear and destroys the world.. Or simply bricks it
Edit: Wait are you talking about the Chainfire root method? If you are you may as well not even consider that if you're planning on custom firmware installs.. TWRP is your best bet because it isn't device/firmware specific like CF. And you need TWRP for firmware installs anyway..
Click to expand...
Click to collapse
Thanks mate!So twrp now supports 5.1.1?
Welcome! TWRP has supported 5.1.1 since the latest version: 2.8.7.1. Change log is in the second post here. Take care and have fun
Stevles said:
Welcome! TWRP has supported 5.1.1 since the latest version: 2.8.7.1. Change log is in the second post here. Take care and have fun
Click to expand...
Click to collapse
Thanks again!But I thought the only way to root the gs6 with 5.1.1 is by using the unikernel something?as 5.1.1 is different than 5.0.2.
hlm19 said:
Thanks again!But I thought the only way to root the gs6 with 5.1.1 is by using the unikernel something?as 5.1.1 is different than 5.0.2.
Click to expand...
Click to collapse
Not sure about that.. Perhaps install unikernal first just to be sure
Okay so go to the last page or two of the TWRP thread and start reading
Stevles said:
Not sure about that.. Perhaps install unikernal first just to be sure
Click to expand...
Click to collapse
Yeah,just checked and have to flash unikernel first and then the twrp via odin.If I root using this twrp method,it supports my 5.1.1 firmware right?Sorry for lots of asking.
hlm19 said:
Yeah,just checked and have to flash unikernel first and then the twrp via odin.If I root using this twrp method,it supports my 5.1.1 firmware right?Sorry for lots of asking.
Click to expand...
Click to collapse
Assuming it doesn't boot loop with unikernel (all reports say it's fine) then yeah you won't have any dramas with root via TWRP.. Like I said it's just software, the boot loop comes from Samsung being slippery Gypsies and modifying their kernels to basically stop people from modifying system partitions. Hence the need for a custom kernel to bypass that crap. You'll be fine
Stevles said:
Assuming it doesn't boot loop with unikernel (all reports say it's fine) then yeah you won't have any dramas with root via TWRP.. Like I said it's just software, the boot loop comes from Samsung being slippery Gypsies and modifying their kernels to basically stop people from modifying system partitions. Hence the need for a custom kernel to bypass that crap. You'll be fine
Click to expand...
Click to collapse
Yeah,and if I need to unroot it,I do just flash the official firmware via odin?
hlm19 said:
Yeah,and if I need to unroot it,I do just flash the official firmware via odin?
Click to expand...
Click to collapse
Sorry for delayed response.. Yes flashing a firmware tar. md5 will reset the system partition back to full stock and replace the recovery, kernel, modem etc.
Just download one corresponding to your device ie.. SM-G92XX where the first X is either a 5 or 0 and the second is the country or region the phone was intended for. I keep the latest firmware for my device and country (not carrier because it has too much bloatware) around at all times to undo any screw ups and start again
Stevles said:
Sorry for delayed response.. Yes flashing a firmware tar. md5 will reset the system partition back to full stock and replace the recovery, kernel, modem etc.
Just download one corresponding to your device ie.. SM-G92XX where the first X is either a 5 or 0 and the second is the country or region the phone was intended for. I keep the latest firmware for my device and country (not carrier because it has too much bloatware) around at all times to undo any screw ups and start again
Click to expand...
Click to collapse
Thanks for the help!Will try it
Try this:
http://forum.xda-developers.com/galaxy-s6/samsung-galaxy-s-6--s-6-edge-unified-development/kernel-stockmod-kernel-t3100395
roydok said:
Try this:
http://forum.xda-developers.com/galaxy-s6/samsung-galaxy-s-6--s-6-edge-unified-development/kernel-stockmod-kernel-t3100395
Click to expand...
Click to collapse
I think he may have already actually, thanks for your input. It was certainly mentioned earlier but now there's a link which is always nice
What does tripping KNOX do? I like and would like to continue using the Tap & Pay feature from my bank. Is KNOX separate from the secure element the bank uses?
Other than providing a separate environment for work, what else does KNOX provide?
Hello,
I have searched all of over the internet for my phones root with no success whatsoever.
- Kingroot does work on the phone but when I reboot my phone it looks up my bootloader and tells me that I have flashed an unauthorised rom and that I should contact cricket. I then had to flash the stock rom with kies.
- I have tried to flash all sorts of recoveries including TWRP and CWM recoveries. It just gives me a fail and on my phone it says "Secure Check Fail: Recovery".
Please help make a root for my phone.
Thank you in advance:fingers-crossed:
Where you get The lollipop update??
Willian182 said:
Where you get The lollipop update??
Click to expand...
Click to collapse
If I were you I would not update because there are no ways to root the phone, at least, I have not found anyway. And the update is through kies 3. But if kies does not give you the update then that is great for all of us on this form. http://teamcspire.com/index.php?/to...s-for-return-to-stock-tarmd5-for-use-in-odin/
Go to this website and please extract the software from kies 3 so that all of us can use it to downgrade from 5.1.1 to 4.4.4. if that's the situation. Please reply if you run into any trouble because I have already done this for the firmware 5.1.1. and I know how to do it.
Thanks in advance
Ohhh thanks, i want to update my Grand Prime yo lollipop, then I try to get root
I search so much for this update but i don't get any information about the update
Willian182 said:
Ohhh thanks, i want to update my Grand Prime yo lollipop, then I try to get root
I search so much for this update but i don't get any information about the update
Click to expand...
Click to collapse
But there is no root for lollipop
Illyakulinych said:
But there is no root for lollipop
Click to expand...
Click to collapse
Trust me, nothing works. I have literally scanned the whole internet.
hi before some days i have rooted my phone with odin and twrp and sucessfully rooted my S6. but after rooting i was unable to check for software update from samsung and unbale to use knox and shealth. so i made an emergency recovery using smartswitch and update my device to noughat 7.0 but after updating again unable to use knox and Shealth but i can now check for software update from samsung. is there any way to untrip knox again becoz it is saying your phone is compromised. but i have unrooted the device now please help
Once you trip Knox, you cannot un-trip it. At all.
i need solution sir. i already know cant untrip
yes i know that
Fobos531 said:
Once you trip Knox, you cannot un-trip it. At all.
Click to expand...
Click to collapse
i know that . i am in need of solution sor contacted to xda
You can use custome roms to gain access to shealth.
Im using Noble nougat 4.0 s8 port, and works great.
Hi.
You still can use SHealt
This is how (of course you need root access) lint to post
Sorry but you can forget to use Knox after you tripped Knox flag.
Try root with Magisk - this allow you to "hide" root from some apps.
PS
Sometimes root is not a bad thing...
Setting ro.config.tima to 0 fixes SHealth. For the Samsung login you'll need to read this, https://forum.xda-developers.com/showpost.php?p=71566173&postcount=6
help
BaTarrY said:
You can use custome roms to gain access to shealth.
Im using Noble nougat 4.0 s8 port, and works great.
Click to expand...
Click to collapse
if i install s8 port can i go back to stock rom in future and is there any problem in this rom . provide me link sir
uvi6156 said:
if i install s8 port can i go back to stock rom in future and is there any problem in this rom . provide me link sir
Click to expand...
Click to collapse
Ofcourse just link any rom.
The only.problem I know of is with GPS location and there is a flashable fix for it.
Rom:
https://forum.xda-developers.com/showpost.php?p=72462439&postcount=4361
GPS fix :
https://forum.xda-developers.com/showpost.php?p=72464911&postcount=4378
thanks
BaTarrY said:
Ofcourse just link any rom.
The only.problem I know of is with GPS location and there is a flashable fix for it.
Rom:
https://forum.xda-developers.com/showpost.php?p=72462439&postcount=4361
GPS fix :
https://forum.xda-developers.com/showpost.php?p=72464911&postcount=4378
Click to expand...
Click to collapse
i will try
downloaded
BaTarrY said:
Ofcourse just link any rom.
The only.problem I know of is with GPS location and there is a flashable fix for it.
Rom:
https://forum.xda-developers.com/showpost.php?p=72462439&postcount=4361
GPS fix :
https://forum.xda-developers.com/showpost.php?p=72464911&postcount=4378
Click to expand...
Click to collapse
just now downloaded all files but i have few questions before installing this rom
1. will secure folder work
2. will samsung pass work
3. will i be able ro login to samsung account
please help
uvi6156 said:
just now downloaded all files but i have few questions before installing this rom
1. will secure folder work
2. will samsung pass work
3. will i be able ro login to samsung account
please help
Click to expand...
Click to collapse
Secure folder and login Samsung account should work,
I am currently using 4 beta (didn't update to stable) and it works.
*Didn't update coz 5 is almost here.
Sam pass won't work.
ok
BaTarrY said:
Secure folder and login Samsung account should work,
I am currently using 4 beta (didn't update to stable) and it works.
*Didn't update coz 5 is almost here.
Sam pass won't work.
Click to expand...
Click to collapse
i have downloaded stable 4.0 lets see i am gonna install it
uvi6156 said:
just now downloaded all files but i have few questions before installing this rom
1. will secure folder work
2. will samsung pass work
3. will i be able ro login to samsung account
please help
Click to expand...
Click to collapse
I'm installing it too now
have you installed
niektk said:
I'm installing it too now
Click to expand...
Click to collapse
have u installed it ?
uvi6156 said:
hi before some days i have rooted my phone with odin and twrp and sucessfully rooted my S6. but after rooting i was unable to check for software update from samsung and unbale to use knox and shealth. so i made an emergency recovery using smartswitch and update my device to noughat 7.0 but after updating again unable to use knox and Shealth but i can now check for software update from samsung. is there any way to untrip knox again becoz it is saying your phone is compromised. but i have unrooted the device now please help
Click to expand...
Click to collapse
Knox should also technically work if you use Magisk Hide as it fakes Knox Tripped to 0x0
how
UltraGamerHD said:
Knox should also technically work if you use Magisk Hide as it fakes Knox Tripped to 0x0
Click to expand...
Click to collapse
i am on stock rom now but still unable to use secure folder and samsung pay. can you please explain how magisk work.
and how to use magisk
uvi6156 said:
i have downloaded stable 4.0 lets see i am gonna install it
Click to expand...
Click to collapse
And, it worked?
I just installed and there is problem
1. Volte not supporting I am unable to make call
2. Model number changed from g920i to g920f
3. Battery draining quickly
Flash stock recovery after that your device will return to official state then you will be able to check or upgrade via OTA.