I flashed my stock unrooted n8010 with the n8000 leak files using odin, I did not used the modem. All good and everything working.
Now I want to get back to stock n8010 jb. When in download mode the device apears like n8000 and odin is not able to flash the stock n8010 firmware.
I installed twrp and rooted, modified buildprop to apear like n8010 and tried to flash a custom rom for n8010, no luck, I get a message that the rom is for n8010 and to try a rom for my device.
How can I trick twrp or odin to make them flash n8010 fw/rom ?
I don't have a nandroid backup,
Edit : I managed to flash 4.0.4 with odin (N8010XXALGC_N8010OXXALG4_COA). After the flash it was stuck at samsung logo, I rebooted in recovery (power+volume up, release only power at samsung...) and wiped cache, wiped data and reset. Now the device booted with android 4.0.4 and I'm downloading a 568.29 MB update. I'll see what happends next...
The goal is to get back to stock jb, official (with triangle away I gues)
Edit: I updated to JB, but when in download mode the device is still N8000, so the problem is still not solved.
Sent from my GT-N8010 using Tapatalk
KoRoZIV said:
I flashed my stock unrooted n8010 with the n8000 leak files using odin, I did not used the modem. All good and everything working.
Now I want to get back to stock n8010 jb. When in download mode the device apears like n8000 and odin is not able to flash the stock n8010 firmware.
I installed twrp and rooted, modified buildprop to apear like n8010 and tried to flash a custom rom for n8010, no luck, I get a message that the rom is for n8010 and to try a rom for my device.
How can I trick twrp or odin to make them flash n8010 fw/rom ?
I don't have a nandroid backup,
Edit : I managed to flash 4.0.4 with odin (N8010XXALGC_N8010OXXALG4_COA). After the flash it was stuck at samsung logo, I rebooted in recovery (power+volume up, release only power at samsung...) and wiped cache, wiped data and reset. Now the device booted with android 4.0.4 and I'm downloading a 568.29 MB update. I'll see what happends next...
The goal is to get back to stock jb, official (with triangle away I gues)
Edit: I updated to JB, but when in download mode the device is still N8000, so the problem is still not solved.
Sent from my GT-N8010 using Tapatalk
Click to expand...
Click to collapse
What version of Odin are you using ?Did you try to remove micro SD and full erase you tablets internal memory card? And why not 4.1.2 you install and not 4.0.4?
Because 4.1.2 gives me error, tried 3 versions of Odin: 3.04, 3.09, and 1.85. Tried 4.1.2 from 3 different sources to avoid a bad download. I can only flash 4.0.4, android shows me n8010 but in download mode is still n8000. I have no idea why, I just can't get rid of the n8000 in download mode.
Maybe I need to flash separate files, just like I did with 4.4.2, bootloader. Ap , csc but I don't know where to get those files for 4.1.2, I only have .tar.md5 files.
I attached a ss with odin eror when trying to flash stock 4.1.2
Sent from my GT-N8010 using Tapatalk
KoRoZIV said:
Because 4.1.2 gives me error, tried 3 versions of Odin: 3.04, 3.09, and 1.85. Tried 4.1.2 from 3 different sources to avoid a bad download. I can only flash 4.0.4, android shows me n8010 but in download mode is still n8000. I have no idea why, I just can't get rid of the n8000 in download mode.
Maybe I need to flash separate files, just like I did with 4.4.2, bootloader. Ap , csc but I don't know where to get those files for 4.1.2, I only have .tar.md5 files.
I attached a ss with odin eror when trying to flash stock 4.1.2
Sent from my GT-N8010 using Tapatalk
Click to expand...
Click to collapse
Did you have success installing the bootloader of the leak kitkat rom? Cause mine failed always, the AP file is the 1 working on me only. I have downloaded this TAR_MD5_PACKAGER here( http://forum.xda-developers.com/showpost.php?p=42393470&postcount=2 ) that I'm using to repack the stock and using 7zip to extract the content of the .tar.md5 files, maybe you can try repacking it seperately using this 2 program. And try to install it using Odin( I'm using Odin 1.85). By the way you can still install custom 4.1.2 rom's right, specifically for 8010 ? Lastly why do you wanna go back to stock 4.1.2 do you have problem with the leak rom?
P.S. Did you format your internal memory as I suggested? Cause once I install back to 4.1.2 have error before and have to install twice the rom( that is according to my experience which some think its not relate to installing error).maybe you can try to format all from the system to the internal memory via CWM recovery /mount section.Then try to install again and remove the SD card too.
I had no problems with the kit Kat files, flashed at the same time bl, csc and ap (no modem). I used odin 3.09. I managed to get back to 4.1.2 by flashing stock 4.0.4 then using OTA (im surprised it worked) . Someone else flashed directly 4.1.2 with mobile odin and worked, but with odin from pc you get an error.
The problem is that in download mode appears like n8000; hopefully, when official kk for n8010 is out we'll be able to fix that.
Sent from my GT-N8010 using Tapatalk
KoRoZIV said:
I had no problems with the kit Kat files, flashed at the same time bl, csc and ap (no modem). I used odin 3.09. I managed to get back to 4.1.2 by flashing stock 4.0.4 then using OTA (im surprised it worked) . Someone else flashed directly 4.1.2 with mobile odin and worked, but with odin from pc you get an error.
The problem is that in download mode appears like n8000; hopefully, when official kk for n8010 is out we'll be able to fix that.
Sent from my GT-N8010 using Tapatalk
Click to expand...
Click to collapse
Glad you manage to resolve some of your problem.Plese ignore my post above your's then.
The problem is not solved lol. I just gave up for the moment. It's a miracle that I didn't bricked the damn thing today
I'll stay with a 4.1.2 stock n8010 fw that is using an n8000 4.4.2 bootloader. Sexy
Sent from my GT-N8010 using Tapatalk
Well from everything I've read it seems the problem is that when we flashed the kitkat leak, flashing the bootloader is what allowed us to flash n8000 over our n8010. This could be why when we flash back using odin we get the error cause the bootloader isn't being flashed too so it's trying to flash n8010 onto what it reads as n8000. It seems that there are only a few solutions. 1we need to find a n8010 bootloader file which so far seems to be impossible to find. 2you can flash an original n8010 cmw or twrp back up it will return you to 4.1.2 n8010 but the bootloader will still be n8000. If this option isn't available to you then you can try 3 download a custom rom I have the darkmans customers stock as a backup and it still works going back to simple stock n 8010 but again the bootloader stays as n8000...
Basically until we can get an n8010 bootloader we are stuck with it...
I even rooted the 4.4.2 leak and tried to flash a custom 4.4.2 made for n8010 and did not let me (based on the same leak i think, so the same bootloader) and failed, twrp sees the device as n8000 and did not allowed me to use n8010 rom.
KoRoZIV said:
I even rooted the 4.4.2 leak and tried to flash a custom 4.4.2 made for n8010 and did not let me (based on the same leak i think, so the same bootloader) and failed, twrp sees the device as n8000 and did not allowed me to use n8010 rom.
Click to expand...
Click to collapse
I think I read somewhere that twrp can have issues with flashing 4.4.2 roms it needs to be the most up to date version of twrp... I tried cm 11 before and had to change to Cwm. But I went back to twrp and now it works
I used twrp 2.7, I think it's the latest.
Edit:
I reached a binary counter of 118
I used triangle away and reset it, however I'm still stuck with the n8000 4.4.2 bootloader.
N8000 bootloader
Same issue here, stuck on N8000 bootloader on my GT-N8010. After endless research I still can't find any solution but now the thing is, the official 4.4.2 KK is availble for the GT-8010, you guys think this is the solution, because I have read that though updating to the official Rom (via Odin Mobile) because Odin desktop fails, the device would still be stuck on the annoying N8000 bootloader?
Yes, even if you flash the n8010 4.4.2 with mobile Odin you will still have the damn n8000 bootloader.
Sent from my Nexus 5 using Tapatalk
KoRoZIV said:
Yes, even if you flash the n8010 4.4.2 with mobile Odin you will still have the damn n8000 bootloader.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Any way of downgrading the Bootloader, I've heard of a nandroid backup but I didn't do that before updating, is it possible to find one on the web?
You need a nandroid from a similar device, is possible but not sure if it will solve the problem.
Sent from my Nexus 5 using Tapatalk
KoRoZIV said:
You need a nandroid from a similar device, is possible but not sure if it will solve the problem.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I thought the official Rom would fix this but visibly no. So we don't have a choice of being stuck with the damn N8000 bootloader?
At the moment there is no solution that I know of.
Sent from my Nexus 5 using Tapatalk
N8010 on N8000 bootloader
Hi guys, isn't there a solution about this yet? I have the exact same problem with the N8000 bootloader, my device is a N8010 16GB from mexico and flashed the leaked N8000 kk stock rom. I will still look for a solution. TKS to all of you.
Mean time solution
Hi Guys, I found a way to flash te new N8010XXUDNE4 on the stuck n8000 bootlader, the bootloader problem remains, but it is possible to flash the n8010 stock rom via mobile odin, I did it and it's fully working, But I flashed a N8010XXUDNE4 customized without sboot.bin so it can be flashed via PC odin too, I'm still not allowed to post links here cause I'm new in forums so if you want the link to that rom let me know how to provide it to you.
Possible solution?
Have a look at my thread, does that look a viable approach?
http://forum.xda-developers.com/galaxy-note-10-1/help/recovering-n8010-leaked-locked-n8000-t2802516
ambmar78 said:
Hi Guys, I found a way to flash te new N8010XXUDNE4 on the stuck n8000 bootlader, the bootloader problem remains, but it is possible to flash the n8010 stock rom via mobile odin, I did it and it's fully working, But I flashed a N8010XXUDNE4 customized without sboot.bin so it can be flashed via PC odin too, I'm still not allowed to post links here cause I'm new in forums so if you want the link to that rom let me know how to provide it to you.
Click to expand...
Click to collapse
Hello everyone
So, I fixed the problem of my tablet being bricked by installing the factory stock 4.0.4 ROM on it, and it has been my go-to resolution for the past couple of days, while I have been struggling to get the upgrade I have been waiting for, for so long.
However, no matter what I seem to do, my device just will not accept the upgrade, and I cannot understand why. Here is what I have done.
Number 1
My android was running a stock 4.1.2 downloaded from Sammobile. I am not sure of the country/region I downloaded at the time, but I think it was either German or from the U.K. I bought my N8000 in China and flashing the firmware to get access to Google stuff was the first thing I did and then upgraded via Sammobile, formerly samfirmware I think. When I saw the 4.4.2 KitKat on Sammobile I downloaded the German upgrade, flashed via Odin like I always had done, and it failed.
I then went on to try via KIES and it did say, that a firmware upgrade was available, however it got stuck and my device bricked. Which led to my 2-day marathon flashing of roms to try and fix it.
Number 2
Flashed the factory 4.0.1 rom using ODIN 1.83, factory reset + cache wipe and then Odin flash the 4.4.2 - Failed in ODIN.
Number 3
Flashed the factory 4.0.1 rom using ODIN 1.83, factory reset + cache wipe and then - Used OTA from settings to upgrade my device. This works until 4.1.2 and then I am told that my device has been modified and that no upgrades are available.
I then try to Odin Flash the Indian 4.4.2 from Sammobile - Failed in Odin
Number 4
Flashed the factory 4.0.1 rom using ODIN 1.83, factory reset + cache wipe and then OTA to 4.1.2. Then I connect to KIES to download the firmware upgrade and it fails and device bricks.
Number 5
Flashed the factory 4.0.1 rom using ODIN 1.83, factory reset + cache wipe and then OTA to 4.1.2. Then I root the device with Framaroot and install triangle away and use the system status modification to trick my tablet into thinking, or realizing, that it is in fact an official.
The OTA upgrade is now available, 800MB downloaded and installation begins, but the process fails and I am left in 4.1.2. I try again, same result. I flash via Odin, it fails, I try Kies it bricks.
Is it just me or is my tablet actively fighting me on this?
Is there anything I can do? Any suggestions? China is not exactly full of Samsung Service Centers, although I am sure a big city like Chongqing has one or two?
hello guys,
yesterday i bought a galaxy s6 (g920f). it got the 1&1 branding but its simlock free. i just read about, that i can use this fw G920FXXU1AOE3_G920FDBT1AODQ_G920FXXU1AOE3_HOME.tar (5.02), flash it with odin, after that a wipe and than update to 5.1.1 with smartswitch. than i got a complete debranded dbt firmware.
ok, thought it would be easy ;P - a ran in conflicts now. odin got errors on flashing. every time it failed flashing. i read about the "hidden.img". i should extract the firmwarefile with 7zip, delete the hidden.img and after that i have to make a new .tar (not tar.md5, cause i will get md5 errors in odin, already tested ) - still fail on flashing....
than i found a pit file, but i dont know how to handle that. i never done that and dont know, whats happening when im flashing it and i dont even know which i have to download.
here is the link http://forum.xda-developers.com/galaxy-s6/general/g920f-pit-file-banded-firmwares-t3118459
hope someone can help me.
best regards taker-`
//edit: meanwhile i triggert knox, so i tried to flash twpr and try to flash the dbt 5.1.1 firmware with the recovery....recoveryflashing also failed - why?
Are you using the official Samsung cable? Odin is very picky about usb cables. How many times did you try? I recently unrooted using Odin, and the first time it failed as well for no reason. I just reconnected the usb cable and tried again, then it worked.
i used the original cable, but i also tried a original cable from a galaxy s5 and s4. same error all the time.
i flashed my s5 with the same cable, same odin version...i want it on stock firmware, cause i sold it. that worked well, but with the s6, it dont work.
Flash this stock 5.1.1 ROM via odin to debrand your G920F.
http://www.sammobile.com/firmwares/download/52470/G920FXXU2BOG8_G920FDBT2BOG8_DBT/
roydok said:
Flash this stock 5.1.1 ROM via odin to debrand your G920F.
http://www.sammobile.com/firmwares/download/52470/G920FXXU2BOG8_G920FDBT2BOG8_DBT/
Click to expand...
Click to collapse
already tried. i cant flash anything. i dont know why. i use odin 3.10.6 and so on... i tried a kernel to obtain root, than flash via terminal twpr and than the firmware as a *.zip...
nothing is gonna work
Hey guys! I have a problem. I have flashed on my Galaxy S7 (Exynos version) the galaxy Note Fan Edition Port rom a couple of weeks ago, but now I flashed the latest stock firmware from Sammobile via odin and it always fails at the bootloader. I don't know why? I searched for many hours for a solution, but nothing works.... I hope somebody could help me
Here is the link for the note fan edition rom: https://forum.xda-developers.com/s7...-galaxy-note-fan-edition-port-vol1-0-t3633626
OEM unlock on?
Could also be that the latest bootloader prevents rolling back, so if you're trying to go from a newer bootloader to an older one it won't let you. You can probably just exclude the BL file and be fine.
Is that Fan Edition ROM you flashed not a S7 Edge rom made to work on the S7..! Maybe your phone shows up as a G935 now?
I have flashed android 8.0 manually from sammobile via odin and it got stuck on emergency recovery and I somehow got it into the download mode and every time I want to flash my stock firmware it says device 2 binary 1... I also flashed twrp recovery and wiped everything (system, data....) and tried again and it always fails in odin and says device 2 binary 1.. Im trying to find solution but everytime it fails. PLEASE HELP ME
daymonfeyenord said:
I have flashed android 8.0 manually from sammobile via odin and it got stuck on emergency recovery and I somehow got it into the download mode and every time I want to flash my stock firmware it says device 2 binary 1... I also flashed twrp recovery and wiped everything (system, data....) and tried again and it always fails in odin and says device 2 binary 1.. Im trying to find solution but everytime it fails. PLEASE HELP ME
Click to expand...
Click to collapse
Samething happened to me. I did the same thing u did but nothing worked.
Can someone plz help us to get odin download work again.
you should go for latest rom. download from here: https://samsung-firmware.org/model/SM-G930F/region/BTU/
You will be satisfy with this.
Hi! Same error but different situation.
I was on the latest firmware 8.0 ITV, I wanted to downgrade to nougat, so I downloaded the first 7.0 firmware BTU (the one that was the best for my S7).
I opened all the firmware files on odin 3.13.1 and I started the procedure but at a certain point everything stopped, on odin the message "failed" appeared and on the phone the message "sw rev check fail (bootloader) device 2 binary 1".
I tried with a different version of odin but the message remains the same, I also tried without flashing the BL file but nothing ... In the end I had to flash again the latest firmware oreo ITV and no errors appeared, but I find myself at the starting point
specific that my S7 has never had modding operations, the knox counter is perfectly at 0x0, I have always used only original firmware and never had problems with odin.
How can I downgrade without having in that error?
Hi just flash this version of latest nougat G930FXXS2DRDI, this is binary 2 firmware (XEO)
Hi, I'm trying to downgrade from 7.0 to 6.0.1. Odin keeps failing.
When Odin fails (after NAND write start), I see an error pop up on the Download mode screen (red letters):
SW REV. CHECK FAIL. DEVICE: 6, BINARY: 5
Tried different versions of Odin, and made sure I had a good copy of the right version of firmware from Sammobile.
Any idea if it's possible? Is there another way to do this besides Odin? Phone is not rooted, stock, Knox intact.
I've been off Samsung for a few years, and my memory is spotty... but would it help if I installed a Recovery, then flashed a custom 6.0.1 rom? Or is that also a problem?
Thanks for any help!
Mike
resarfekim said:
Hi, I'm trying to downgrade from 7.0 to 6.0.1. Odin keeps failing.
When Odin fails (after NAND write start), I see an error pop up on the Download mode screen (red letters):
SW REV. CHECK FAIL. DEVICE: 6, BINARY: 5
Tried different versions of Odin, and made sure I had a good copy of the right version of firmware from Sammobile.
Any idea if it's possible? Is there another way to do this besides Odin? Phone is not rooted, stock, Knox intact.
I've been off Samsung for a few years, and my memory is spotty... but would it help if I installed a Recovery, then flashed a custom 6.0.1 rom? Or is that also a problem?
Thanks for any help!
Mike
Click to expand...
Click to collapse
the failure message is saying that your phone has a version 6 bootloader and youre trying to flash a version 5 bootloader. you cant downgrade from 6 to 5. sorry mate, nothin' doin'