Update - 2/21/2011
If you have bricked an HTC EVO this will likely NOT work for you and this is the wrong info to be reading. I have gotten a few emails from this link about EVO 110 errors.
12/26/2010 - This thread is super old now:
If you ran the 1.56 RUU and your phone no longer turns on visit htc.com, go to support, choose Hero (Sprint) and download the 2.1 system update.
Remove battery from your phone and start it up again, then run the exe file that you just downloaded -
http://member.america.htc.com/downlo...2.27.651.6.exe
------All the info below is kept for reference -------
(As of 3/31/2010 - I am 10 for 10 for getting these back and working!! 3/3 of going back to 100% stock)
Edit: I have no longer kept track... its been over a month and I know personally I've done about 15 more of these... with about half being return to stock.
If you need to contact me, PLEASE EMAIL instead of using private messages, it'll probably turn into a google talk chat anyways, so add me on there, [email protected] (Its just easier than having to log in here and reply to private messages, since I get emails on the go as well.)
So you just ran the 1.56 RUU and got a 110 error. Now your screen turns on and stays black and if you plug the phone into USB you see the HTC logo. Unplug it and see the RUU menu.
Like you, I decided to attempt to roll back using the RUU 1.56. I was hit with the 110 error, and nothing but fastboot would work, I was able to launch ./fastboot-mac oem boot to get into the system.
I tried ./fastboot-mac boot image/bootname.img and a billion other things like everyone else who is having the issue, but just like them I had no success. In the second post below are the steps to resolve this issue. This will either take you to your first Nandroid backup or to whatever ROM you choose to flash once you get recovery back. I have not found a way to get back to 100% stock, but at least your phone wont be a brick.
EDIT:As of 3/30/2010 @ 8:30 PM I was able to get my phone completely 100% to stock. I was able to do this by retrieving a Nandroid restore from someone who used flashrec to make their initial backup. This restore does not touch the recovery image but I was able to boot into my recovery then write the HTC recovery back on top of it. I now have 100% un-rooted phone. See Post number 2 for the right way to do this.?
I've helped a few people over log me in now.
I'm willing to continue doing this but it is cutting into my family time, I will do this for a "respectable" amount of money.
Feel like I've helped you??
Buy me some coffee!
(Zip attached includes fix and stock folders. Use the fix folder FIRST to get completely booted. You can use the stock folder if you want to get 100% stock after you have a running unrooted system but have RA recovery.)
Steps to resolve:
(You SHOULD have a Nandroid backup of some sort, if not download a ROM... Fresh1.1??)
1) Boot the phone to black screen
2) Plug phone into PC/MAC - The HTC logo should appear at this point
---- If you've been doing anything else, rerun the RUU and let it fail and reboot to the HTC logo.
3) PC - fastboot oem boot | MAC - ./fastboot oem boot
(Make sure you turn on USB Debugging under Settings --> Applications --> Developer)
4) Root your phone using asroot2
Code:
adb push asroot2 /data/local/
adb shell chmod 0755 /data/local/asroot2
adb shell
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4775 su
5) This is where your Nandroid backup comes into play.
(Browse to your nandroid folder, find your first backup and copy all of the .img files except system and cache to your SD card root directory)
NOTE: At this point you should dismount the SD card if you mounted inside of Android OS(Sense/Launcher)
6) run adb shell (PC - adb shell | Mac - ./adb shell)
7) type su
8) Run the following commands (if you get out of memory errors, type su again and try once more)
NOTE: Do not copy the "#"'s in the commands, the # just means you are running as SU, as opposed to the "$"
Code:
# flash_image recovery /sdcard/recovery.img
# flash_image boot /sdcard/boot.img
# flash_image misc /sdcard/misc.img
9) now... type reboot recovery
This time you should get your recovery menu, should have been RA or whatever you used... from there I did a complete nandroid restore and my system booted.
Also, after I did this I did try to let it boot without doing a recovery and it wouldnt go anywhere... but I'm fairly impatient... it may have wanted to load. I figured it best to do an entire Nandroid restore though.
-------------------------------------------------------------
100% Stock Configuration Work Around
-------------------------------------------------------------
Non-Rooted Nandroid Backup:
nandroid.7z
I was able to get my phone completely 100% to stock. I was able to do this by retrieving a Nandroid restore from someone who used flashrec to make their initial backup. This restore does not touch the recovery image but I was able to boot into my recovery then write the HTC recovery back on top of it. I now have 100% un-rooted phone. I'm not sure how to go about posting a 127MB file, what do you think it the best place?
After restoring the Nandroid backup I tried this:
Code:
Dustan-Bonneys-MacBook:tools dustanbonney$ ./adb shell
$ su
su: permission denied
Then I rebooted to recovery (I used RA 1.5.2)
Code:
Dustan-Bonneys-MacBook:tools dustanbonney$ ./adb remount
remount succeeded
Dustan-Bonneys-MacBook:tools dustanbonney$ ./adb shell
/ # mount -a
mount: mounting /dev/block/mmcblk0p2 on /system/sd failed: No such file or directory
/ # cd /sdcard
/sdcard # flash_image recovery /sdcard/Stock/recovery.img
flashing recovery from /sdcard/Stock/recovery.img
/sdcard # reboot recovery
I was booted to the Triangle and exclamation mark... I pulled the battery and booted up normally.
Stock Kernel - 2.6.27-533ce29d [email protected] )
Stock Build - 1.56.651.2 CL85027 release-keys
Other things that should be mentioned:
If you used RA 1.6.2 - I was unable to get my boot.img or the stock boot.img from the RUU's rom.zip to flash back to the recovery partition. I had to use the RA 1.6.2.img and "flash_image recovery /sdcard/recoverynamegoeshere.img"
It seems that if you've flashed the radio update, the RUU does not write the radio back successfully. Others have had issues going back to the stock radio using the upgrade.zip option as well.
I attempted to use the boot.img, recovery.img, from the RUU's rom.zip with no success. I might try it again. I was able to get to stock recovery (Triangle and exclamation) and to the Hboot menu... but from hboot I had to run the RUU and rebrick the device cause I couldnt get anything at that point, even fastboot oem boot wouldnt load.
There have been times when I get weird issues writing the flash recovery, boot, or misc and when you reboot and load "fastboot oem boot" it wont look like it goes anywhere.... check "adb devices" and your device should be listed. From there do an "adb remount" and then "adb shell" and reflash once more and then "reboot recovery".
If all else fails, I'm available for a small fee.
[email protected]
Anxiously waiting your news. Just encountered this problem today.
Updated ...
imekul said:
Anxiously waiting your news. Just encountered this problem today.
Click to expand...
Click to collapse
Wow! If you've fixed this, I think you're everyone's hero now. We won't have to worry about using the RUU now
I was going to try something similar to this today, but i was unable to brick my phone using the 1.56.651.2 RUU. I was running Flipz updated radio and DamageControl v2.0r2.. The RUU completed successfully..
I was reading over the forum post in http://forum.xda-developers.com/showthread.php?t=645002 and i read that you could boot the system using the command 'fastboot oem boot' I was going to try to use FlashRec to do the work of Flashing the recovery, then booting into recovery and use nandroid.. but you beat me to it! Good work!
I attempted flashing a new recovery image this way with no avail... I also attempted only
Code:
flash_image recovery /sdcard/recovery.img
and still was unable to boot the phone into recovery. I think it had to have been something with doing boot.img and recovery.img at the same time... I dont know what the misc.img does and I'm assuming data.img is userdata... but I did them all and then it worked...
Other users also tried flashrec and with no success... right track though.
chavo2005 said:
I was going to try something similar to this today, but i was unable to brick my phone using the 1.56.651.2 RUU. I was running Flipz updated radio and DamageControl v2.0r2.. The RUU completed successfully..
I was reading over the forum post in http://forum.xda-developers.com/showthread.php?t=645002 and i read that you could boot the system using the command 'fastboot oem boot' I was going to try to use FlashRec to do the work of Flashing the recovery, then booting into recovery and use nandroid.. but you beat me to it! Good work!
Click to expand...
Click to collapse
What do u mean by 3) PC - fastboot oem boot | MAC - oem boot?
blankd3ckskat3r said:
What do u mean by 3) PC - fastboot oem boot | MAC - oem boot?
Click to expand...
Click to collapse
if your using a pc type fastboot oem boot
if your using a mac type ./fastboot oem boot
This!
Thanks Regaw
regaw_leinad said:
if your using a pc type fastboot oem boot
if your using a mac type ./fastboot oem boot
Click to expand...
Click to collapse
Trying this right now.
So far, am getting lots of "mtd: write error" and "mtd: re-read error" Out of memory errors for flashing the recovery image. Guess I'll give this some time, and try to su again and reflash? Or should I kill it as soon as the Out of memory errors pop up and try again?
If you get errors like...
adb shell
su
flash_image recovery .........
(out of memory... etc)
Then...
just su again... so you really su twice
its what I had to do.
imekul said:
Trying this right now.
So far, am getting lots of "mtd: write error" and "mtd: re-read error" Out of memory errors for flashing the recovery image. Guess I'll give this some time, and try to su again and reflash? Or should I kill it as soon as the Out of memory errors pop up and try again?
Click to expand...
Click to collapse
Trying it a second time, and so far am getting a bunch of Out of memory errors. After the first one "finished," I did as you recommended and typed "su" a second time, and then typed the "flash_image recovery /sdcard/recovery.img" command.
So far, looks like it's giving the same errors the second time around.
This second attempt, it ended with "error writing recovery: No space left on device."
Just to be sure, I checked the SD card, and that has over 1 GB of free space.
If you're willing to allow something like logmein.com or some way for me to remote assist you, I would like to try. [email protected] if you're in.
imekul said:
This second attempt, it ended with "error writing recovery: No space left on device."
Just to be sure, I checked the SD card, and that has over 1 GB of free space.
Click to expand...
Click to collapse
Sounds awesome. Thanks. I'll e-mail you now.
Dun Dun Dun... The results are in!
imekul said:
Sounds awesome. Thanks. I'll e-mail you now.
Click to expand...
Click to collapse
dfbonney is the man!!
After a friendly little session on LogMeIn Express, I am good as new! How awesome!!
imekul said:
dfbonney is the man!!
After a friendly little session on LogMeIn Express, I am good as new! How awesome!!
Click to expand...
Click to collapse
We ended up just needing to run
Code:
adb shell
reboot
fastboot oem boot
adb shell
su
//flash commands here
that seemed to do it. so make sure if you're having issues to restart the device and try again!
Edit: Also, we didnt get data.img to work so we only did boot, recovery, and misc.img's
Hey,
Ok so a little backstory before my problem: So I was in the middle of putting a new ROM on my captivate. I had one before but i wanted to change so I put the rom in update.zip and installed it will clockworkmod recovery. It installed fine I think but then when I tried to boot it gets stuck on the boot screen. So i tried to boot in recovery mode. I geld down both the volume buttons and the power button until it reboots twice, then I let go of the power button. but it still gets stuck on the boot screen and does not go into recovery mode. So i plugged it into my computer and using
Code:
adb devices
it shows up under recovery mode. So far so good. I can use the
Code:
adb reboot
and
Code:
adb push
commands fine. but when i try to use
Code:
adb shell
it says
Code:
exec '/system/bin/sh' failed: No such file or directory (2)
So i can not reflash the recovery image. I read that I just needed to mount the /system file. But i do not know how to do this. the "mount" command does not work with adb. I would appreciate anything to help me to either reflash the rom or restore to factory or anything where i can work off of. thanks
I have exactly the same problem.
Did you get to a solution to this?
Good luck, dude.
Is there a solution to this without using a Motorola Factory cable? I don't have the resources to make one and I don't have money to buy one.
I'm not sure putting the rom into "update.zip" was the right choice.
adb shell could fail because the partition is not mounted, the sh binary is not installed, or not at the correct location
If you can still get the captivate into download mode, you could use odin/heimdall to flash a working ROM.
First of all...thanks to everyone that has EVER posted in the XDA forums! I've spent days reading them and I came across one that had a suggested solution for my problem. So let's start...
1) Bricked
2) ADB is finally working again...so..not a problem any longer
(Don't ask me how I got it to work again....I have no idea. System was wiped while using TWRP from a bootloop)
3) Now...with system wiped I have no '/system/bin/sh'
4)adb shell will not work because of this. adb root does not work because of production model. adb remount is not permitted.
Now....I came across a thread that suggest using r2.6.2.kindlefire.boot.insecure.img and zergRush. I have the zergRush file, but I need the r2.6.2.kindlefire.boot.insecure.img to push with adb.
Does anyone know where I can get the r2.6.2 at? Filesonic is disabled and Multiupload will not return page.
Link I came across: addictivetips /mobile/gain-root-adb-access-with-insecure-boot-image-for-kindle-fire/
Dear Sirs,
I have HTC Desire Z with CM 7.0.3 (superuser installed) and s-off. Posting here since the issue seems relevant to android in general rather than specific hardware...
I have already seen the following threads before opening this one but they do not help since I cannot issue any of the commands that they mention:
:http://forum.xda-developers.com/showthread.php?t=1364521
:http://forum.xda-developers.com/showthread.php?t=1087350
:http://forum.xda-developers.com/showthread.php?t=837102 (it says to use mount command but thats exactly where I get the permission denied)
When I boot the phone normally and "adb shell", I can get a root prompt (id command shows root user, "cd" shows "/"). But ANY command I run brings permission denied (even ls, chmod, mount). I literally can't do anything. Same whether I boot with/without S D card. I CAN however issue commands such as "adb pull /init.rc" if I exit and go back to DOS.
If I open a terminal session (with Superuser full permissions), I can SU as root, but again cannot issue any commands without getting "permission denied"/
However if I boot into clockworkmod recovery and mount /data and /system, and then open an adb shell via USB, I can connect as root and browse everything, everything is fine and all commands work OK. /etc/fstab shows all partitions would be mounted as rw.
So it looks like some application during boot, is resetting the permission for /system to be ro, and also removing root's privileges.
Please could you let us know if there is a method to determine what app is doing this during boot. I cannot see anywhere in init.rc where I can catch this application that is doing this and prevent it from making /system inaccessible after boot.
Preferably if someone could point me to the complete log of the boot process that shows each command that is run, I might have a clue as to where in the boot up process, the /system partition suddenly becomes ro and root loses all permissions.
The problem prevents busybox updating and other root apps that need to write to /system.
This was not a problem for months after installing and rooting CM 703, only recently it has become an issue, perhaps following some hidden Google update???
Thanks
Hey everyone, I have this very strange issue
The other day I made a nandroid backup because I wanted to mess around with some stuff I wasn't sure was going to work. I then restored the backup, and tada, bootloop. I was stuck on the boot animation. Tried a deleting data/dalvik/cache from recovery (CWM 6.0.4.7), installing rom again, but nothing worked.
Now, what I did may or may not have been smart. I wiped everything using "wipe userdata" in the adb shell. Everything gone. Now I want to put on a working rom again, but I can't. Two problems:
1. My CWM recovery is doing this . Not only when I boot into it trough bootloader, but, maybe this is because I don't have a working rom, it also seems to go into it after my bootloop attempts to boot twice, as seen here.
I have no idea what's happening and why and how. It just keeps flashing like this and I can't access the menu. I tried reflashing, flashing the touch version, flashing TWRP which doesn't have default adb access, and flashing it once again but same result. So I can't choose a rom to flash. How do I fix this?
2. I can still push files to /data/media/ and /sdcard/, but after that I have no way to install them. No tutorial I found seemed to work, e.g this one from xda says I have to mount /data/ but when I do that I get
> C:\sdk\platform-tools>adb shell
~ # mount data
mount data
mount: mounting /dev/block/platform/msm_sdcc.1/by-name/userdata on /data failed:
Invalid argument
And I've also done this one which states the rom should install, but it doesn't. The cd and push are successful, but I can't do anything with it. I also think my /sdcard/ got unmounted at some point, but I was able to push a file to it so not sure here.
Does anyone know how to fix this. I have no idea what to do, pretty hopeless at this point. Thanks so so much if you have any tips
-Josh
Duplicate.
http://forum.xda-developers.com/general/xda-assist/bootloop-nandroid-restore-tried-t3153174
Hello,
I am trying to recover from a softbrick issue. I have a BLU Studio C 5+5 LTE and therefore can't use TWRP or CWM (At least that is my assumption, maybe someone knows different). Before getting into the softbrick state I took 3 different types of backups in the hopes that one of them could be used in case it was needed. (like this)
Type 1 - I did an ADB shell backup from a completely stock device (unrooted) I used this command-
adb backup -apk -all -f fullbackup.adb
For this method I followed this guide here-
https://linuxiswonderful.wordpress.com/2015/04/04/full-backup-of-nonrooted-android/
Type 2 - I used Titanium backup and performed a complete system and application backup
Type 3 - I rooted the phone and backed up all partitions using dd after reviewing the partition layout of the device. For example, to backup the system partition I did the following at an ADB shell-
dd if=/dev/block/mmcblk0p21 of=/storage/sdcard1/firmware-img/system.img
I believe the last operation I tried before softbricking was installing the Xposed framework module for my device (running Lollipop 5.1.1).
I am able to still communicate to my device using ADB and I can get an ADB shell. or enter fastboot mode My device presently shows the manufacturer's logo when booting and gets no further.
To recover from this issue I think I have two basic options
#1 restore from backup
#2 locate the problem that is causing the system to hang at startup in the first place
At the end of the day I am trying to find the simplest, quickest method to get back up and running. Both methods are acceptable to me. I am not worried about losing any data.
My challenge/sticking point is how to turn my backups into a usable format to get me back on track or understand the boot process enough to get out of the boot loop.
The first thing I tried was mounting my raw image files created from the dd process. I followed this guide-
https://samindaw.wordpress.com/2012/03/21/mounting-a-file-as-a-file-system-in-linux/
I ran these commands-
#losetup /dev/loop0 /path/to/my/system.img
# mkfs -t ext3 -m 1 -v /dev/loop0
# mount -t ext3 /dev/loop0 /mnt
# cd /mnt
# ls
The various image files I created all seemed to mount "ok" OK meaning that the loopback mount process worked but it appears there is nothing but a lost+found folder in the mounted image. (I'm not sure why that is.)
I am still researching methods to turn my other backups into something usable for recovery purposes.
For using the adb backup file I created, this is what my understanding is-
Adb backup uses a type of compression (don’t remember what kind). I would need to uncompress the file first. After uncompressing and being able to view the file contents I would think I should be able to put together a flashable zip file of some sort.
I think the process for Titanium backup would generally be the same- uncompress/convert file format, create/assemble a flashable zip file
The last thought I had was trying to get the system to boot. To do so, I need to better understand the boot process. I am familiar with how Linux boots as I am a Sys Admin. I know Android is similar but just different enough to make me research this further. I can pull dmesg log for anyone if that will help. I was also seeing where you could use the logcat command. (That is new to me as it seems more Android specific and not used in Linux that I know of)
If there is any other info you need to see, please let me know. I made a lot of notes about the system architecture, partition layout, etc.
Many thanks in advance for your help!
XDA Visitor said:
Hello,
I am trying to recover from a softbrick issue. I have a BLU Studio C 5+5 LTE and therefore can't use TWRP or CWM (At least that is my assumption, maybe someone knows different). Before getting into the softbrick state I took 3 different types of backups in the hopes that one of them could be used in case it was needed. (like this)
Type 1 - I did an ADB shell backup from a completely stock device (unrooted) I used this command-
adb backup -apk -all -f fullbackup.adb
For this method I followed this guide here-
https://linuxiswonderful.wordpress.com/2015/04/04/full-backup-of-nonrooted-android/
Type 2 - I used Titanium backup and performed a complete system and application backup
Type 3 - I rooted the phone and backed up all partitions using dd after reviewing the partition layout of the device. For example, to backup the system partition I did the following at an ADB shell-
dd if=/dev/block/mmcblk0p21 of=/storage/sdcard1/firmware-img/system.img
I believe the last operation I tried before softbricking was installing the Xposed framework module for my device (running Lollipop 5.1.1).
I am able to still communicate to my device using ADB and I can get an ADB shell. or enter fastboot mode My device presently shows the manufacturer's logo when booting and gets no further.
To recover from this issue I think I have two basic options
#1 restore from backup
#2 locate the problem that is causing the system to hang at startup in the first place
At the end of the day I am trying to find the simplest, quickest method to get back up and running. Both methods are acceptable to me. I am not worried about losing any data.
My challenge/sticking point is how to turn my backups into a usable format to get me back on track or understand the boot process enough to get out of the boot loop.
The first thing I tried was mounting my raw image files created from the dd process. I followed this guide-
https://samindaw.wordpress.com/2012/03/21/mounting-a-file-as-a-file-system-in-linux/
I ran these commands-
#losetup /dev/loop0 /path/to/my/system.img
# mkfs -t ext3 -m 1 -v /dev/loop0
# mount -t ext3 /dev/loop0 /mnt
# cd /mnt
# ls
The various image files I created all seemed to mount "ok" OK meaning that the loopback mount process worked but it appears there is nothing but a lost+found folder in the mounted image. (I'm not sure why that is.)
I am still researching methods to turn my other backups into something usable for recovery purposes.
For using the adb backup file I created, this is what my understanding is-
Adb backup uses a type of compression (don’t remember what kind). I would need to uncompress the file first. After uncompressing and being able to view the file contents I would think I should be able to put together a flashable zip file of some sort.
I think the process for Titanium backup would generally be the same- uncompress/convert file format, create/assemble a flashable zip file
The last thought I had was trying to get the system to boot. To do so, I need to better understand the boot process. I am familiar with how Linux boots as I am a Sys Admin. I know Android is similar but just different enough to make me research this further. I can pull dmesg log for anyone if that will help. I was also seeing where you could use the logcat command. (That is new to me as it seems more Android specific and not used in Linux that I know of)
If there is any other info you need to see, please let me know. I made a lot of notes about the system architecture, partition layout, etc.
Many thanks in advance for your help!
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
There are no specific forums for your device model on XDA. However, if you create an XDA account, you can ask your questions here:
Android Q&A, Help & Troubleshooting
You will receive expert advice there.
Good luck and welcome to XDA!