Okay so i replaced the screen on my mega. was running stock rom no root. now i put the new screen on go to do test and im in boot loop. now i take and put the old screen on to see because i wasnt in boot loop prior to this. now this screen is also showing boot loop. now i cant access recovery it will show logo screen with blue recovery booting and then just keeps looping. now i have flashed several firmware from sammobile with no success. i have also flashed cwm recovery and i can get the android guy with a download bar but it stops with him falling over and a red triangle above him. no recovery then back into boot loop. i cant access recoveries period but i can get into downlaod mode whenever i want. as this point im not even sure what to try to try. does anyone have any suggestions or ideas of anything that will work.
[email protected] said:
Okay so i replaced the screen on my mega. was running stock rom no root. now i put the new screen on go to do test and im in boot loop. now i take and put the old screen on to see because i wasnt in boot loop prior to this. now this screen is also showing boot loop. now i cant access recovery it will show logo screen with blue recovery booting and then just keeps looping. now i have flashed several firmware from sammobile with no success. i have also flashed cwm recovery and i can get the android guy with a download bar but it stops with him falling over and a red triangle above him. no recovery then back into boot loop. i cant access recoveries period but i can get into downlaod mode whenever i want. as this point im not even sure what to try to try. does anyone have any suggestions or ideas of anything that will work.
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
Fortunately, there is an XDA forum dedicated to the Galaxy Mega. I suggest you post in that forum's friendly Q&A thread at http://forum.xda-developers.com/galaxy-mega/help where the experts familiar with your device will be best able to guide you.
Good Luck!
Related
Hi,
Today i've f***ed up my phone -.- . I was trying to install a custom rom when it simply whent black. Now, when i turn it on, it goes to the main boot logo and then it reboots and so on. I cant acess do recovery or download mod. Its a samsung galaxy s.
Thanks
What was the ROM you were trying to flash?
Have you taken the battery out, put it back in again, and tried to boot into Recovery from there?
my phone is rooted and i could go into recovery mode but the screen was black. so i followed the first few steps at this forum to try to install a custom rom and show it
http://forum.xda-developers.com/showthread.php?t=974789
while i was installing the CoreDroid the phone was installing it in recovery mode and my screen was black so i let it go for 10 min and it rebooted. Then it goes past the htc logo and i see a 1 sec animation then the phone goes back to htc screen and keeps doing this. i then tried to go into the recovery mode and do a factory reset. but once i click on that the screen goes black so i dont know what im doing. Please helppp.Noiw i wish that i had never tried this rooting thing.Back to the tilt2 till i get some help i guess!!
Same problem but im stuck in the bootloader
See the post above "stuck in boot loader" the same solution applies to you.
Hi
i recently bricked my phone while updating from stock to phils cwm recovery and my cable unplugged. After that my phone went just dead. I read on the internet and used a OMAP flash and after that i could access my download mode, but it has a yellow exclamation mark triangle and has the android mascot with a 0 in it. I dont know what that means.
Now i some how managed to put a stock rom in it (Gingerbread). But it never switches on. I keep getting a blank screen, not even the samsung bot load symbol comes up. But when ever i use a pit file to just repartition the device my phone starts up and the gingerbread os switches on. But it keeps flashing that every process of google is being forced close, so i cant even move ahead. its just stuck there, and error keeps coming up with force close pop up.
If i try to restart the device it gets the blank screen again. it works again if i repartition it.
i even tried nand flash, but it gets stuck in odin after the message Erase.....
i tried adding a new recovery to no avail. Neither does a new Android OS gets pushed in, gets stuck at NAND write start.
The phone doesnt let me access recovery also. It gets the same blank screen when i try.
help please
cibrotron said:
Hi
i recently bricked my phone while updating from stock to phils cwm recovery and my cable unplugged. After that my phone went just dead. I read on the internet and used a OMAP flash and after that i could access my download mode, but it has a yellow exclamation mark triangle and has the android mascot with a 0 in it. I dont know what that means.
Now i some how managed to put a stock rom in it (Gingerbread). But it never switches on. I keep getting a blank screen, not even the samsung bot load symbol comes up. But when ever i use a pit file to just repartition the device my phone starts up and the gingerbread os switches on. But it keeps flashing that every process of google is being forced close, so i cant even move ahead. its just stuck there, and error keeps coming up with force close pop up.
If i try to restart the device it gets the blank screen again. it works again if i repartition it.
i even tried nand flash, but it gets stuck in odin after the message Erase.....
i tried adding a new recovery to no avail. Neither does a new Android OS gets pushed in, gets stuck at NAND write start.
The phone doesnt let me access recovery also. It gets the same blank screen when i try.
help please
Click to expand...
Click to collapse
Hmm ... after flashing a custom (PhilZ-cwm) recovery, the yellow triangle shows that you are no longer on official/stock firmware.
You can reset it with TriangleAway app from Chainfire.
If download mode still works, you can try to flash another (custom) kernel with a custom recovery. But it has to be a kernel which is compatible with your current ROM.
For further questions, please post in the Galaxy SII GT-I9100 G Q&A thread.
If you have issues with your download mode, check the [GUIDE] Fix an unflashable or soft bricked I9100G thread.
Thread closed ... thank you !
I recently installed custom rom on my phone then i downloaded twrp recovery manager or maybe it was rom installer in my android . Through one of those apps i installed custom boot screen then I decided to change it after few reboots because it was taking longer then the default boot screen so i deleted thought it would go back to default boot screen automatically so to check i restarted my device and phone got stuck at start up screen. I was trying to get my recovery back which wasnt working so i could install custom rom now the phone is stuck at start up and recovery doesnt work already what should i do to fix this epic problem i really dont want to lose my phone over custom roms lol ? Help would be much appreciated .
Thank you.
Hi,
You seem to have opened two(2) threads on the same subject.
Please look here for you assistance.
http://forum.xda-developers.com/general/xda-assist/phone-stuck-boot-screen-deleting-boot-t3019429
Thread closed.
Thanks,
BD619
Hi, hoping someone can help me out i cant find anything on google.
I just installed insertcoin custom rom onto my htc butterfly s and it seems that it went off without a hitch.
after the installation it prompted me to reboot, which hung at the htc loading screen for a long time. and so i turned it off and on again.
Now it shows me the Htc loading screen after awhile it turns black, vibrates and shows me the htc loading screen again but this time there is a booting to recovery mode at the top, and it brings me to my CWM recovery page.
nothing i do can get me out of this loop. anyone has any advice?
Someone suggested to me that the new devices dont auto flash boot and after using fastboot to flash the boot again it seems to have fixed it.
but i cant find a way to delete this thread so yea..