Related
As the title says: P5110 keeps rebooting during boot - right after animation stops (before word SAMUNGS starts glowing).
Tablet is rooted and there is CWM 5.5.0.4 installed. Was just fine for almost half a year and all of a sudden this...
I have tried
- wipe data/factory reset
- wipe cache partition
- advanced : wipe Dalvik Cache (whatever that might be?)
I also tried all the "mounts and storage" options and noticed on thing: i can mount all storage mounts (/system, /cache, /data, /efs, /preload, /sdcard) but one - namely /emmc. Does it mean that emmc is broken? What is emmc? Is it important?
I am considering unrooting it and removing CWM. But not sure whether it's even possible and don't dare to try!
Can you tell me anything that might help me debrick this tablet?
Do you have nandroid backup(one that you make with cwm)? If yes go to backup and restore in cwm and hit restore....if not try to reflash rom via cwm or flash stock rom via odin in dowload mode.
emmc is.... http://www.simmtester.com/page/news/showpubnews.asp?num=181
Starojitski said:
As the title says: P5110 keeps rebooting during boot - right after animation stops (before word SAMUNGS starts glowing).
Tablet is rooted and there is CWM 5.5.0.4 installed. Was just fine for almost half a year and all of a sudden this...
I have tried
- wipe data/factory reset
- wipe cache partition
- advanced : wipe Dalvik Cache (whatever that might be?)
I also tried all the "mounts and storage" options and noticed on thing: i can mount all storage mounts (/system, /cache, /data, /efs, /preload, /sdcard) but one - namely /emmc. Does it mean that emmc is broken? What is emmc? Is it important?
I am considering unrooting it and removing CWM. But not sure whether it's even possible and don't dare to try!
Can you tell me anything that might help me debrick this tablet?
Click to expand...
Click to collapse
If you have nandroid backup.. Just restore it.. Or else download a stock firmware and flash it via odin.. gud luck:good:
flash another rom !!
mythi said:
flash another rom !!
Click to expand...
Click to collapse
Sorry to jump on this thread but might be a similar steps the OP has to take.
What if he flashes a new Rom and it still is locked in a strange boot up?
I posted a thread earlier today but either no one has an answer or my thread title was just crappy.
Mine did exactly what his is doing now (just boots the samsung logo and hangs) and now it just boots into recovery everytime you start it.
Flashing an original stock rom didnt fix it.
Flash via Odin any stock ROM then root it and flash whatever you like.
This kind of brick may occur easily if you have flashed uncompatible kernel or tried to restore nandroid backup of another ROM or made by uncompatible CWM recovery version.
Sent from my GT-P5110 using XDA Premium HD app
Solved?
dartd27 said:
Sorry to jump on this thread but might be a similar steps the OP has to take.
What if he flashes a new Rom and it still is locked in a strange boot up?
I posted a thread earlier today but either no one has an answer or my thread title was just crappy.
Mine did exactly what his is doing now (just boots the samsung logo and hangs) and now it just boots into recovery everytime you start it.
Flashing an original stock rom didnt fix it.
Click to expand...
Click to collapse
Normally, it should actually work absolutely fine if you flash a stock ROM via Odin.
Nobody knows what did cause your problems and what did you flash as last. Also, different OS versions use sometimes different partitions. Even CWM recovery is not compatible through all versions, it uses different formatting.
So this way should work to restore stock ROM on your device:
find and download Odin that fits your device (earlier versions are not neccessarily worse ones)
find and download PIT file for your device
find stock ROM for your device consisting 3-files (for PDA, Phone, CSC).... ROMs are usually zipped, so you will get 3 data after extracting
The PIT file will do re-partitions for the case that your formerly installed ROM used different partitions whch are not compatible with the stock ROM.
After that you will have again unrooted stock ROM. So just be careful afterwards whatever you flash and before you do it, make sure that whatever you flash always fits your device (no matter is it whole ROM, kernel or just upgrade).
tetakpatak said:
Normally, it should actually work absolutely fine if you flash a stock ROM via Odin.
Nobody knows what did cause your problems and what did you flash as last. Also, different OS versions use sometimes different partitions. Even CWM recovery is not compatible through all versions, it uses different formatting.
So this way should work to restore stock ROM on your device:
find and download Odin that fits your device (earlier versions are not neccessarily worse ones)
find and download PIT file for your device
find stock ROM for your device consisting 3-files (for PDA, Phone, CSC).... ROMs are usually zipped, so you will get 3 data after extracting
The PIT file will do re-partitions for the case that your formerly installed ROM used different partitions whch are not compatible with the stock ROM.
After that you will have again unrooted stock ROM. So just be careful afterwards whatever you flash and before you do it, make sure that whatever you flash always fits your device (no matter is it whole ROM, kernel or just upgrade).
Click to expand...
Click to collapse
Thank you for the reply. I had posted a link in here that linked to my thread that explained what i had done and used but it didnt show up for some reason? Anyway I used the below roms(in bold). An update was available for JB and we own two tablets both the P5113 and bought at the same time. One tablet updated fine but the other one would download the package but then would keep failing to install it. So i did a factory reset on the device and then that's when the fun began and it started booting strange.
So I first tried flashing the official JB rom using ODin 3.04.
P5113UECLK7 (4.1.1) - Cellular south November 2012 (Official)
and it still did the same thing so then i tried flashing it back to ICS which is the rom that was on there i think. (It was ICS but not sure if that was the exact version number?)
P5113UEBLI1 (4.0.4) - Singapore September 2012 (Official)
Im sure the roms are going on there fine as if im not mistaken ICS has a blue battery charge icon and JB a gold one. I noticed that it went from blue to gold when i first loaded the 4.1.1 on there and then back to blue when i put ICS back on there.
I cant seem to find a PIT file for the P5113. Only for the P5100. Would that work?
I tried it anyway and it didnt work
dartd27 said:
I cant seem to find a PIT file for the P5113. Only for the P5100. Would that work?
Click to expand...
Click to collapse
If I was you, I wouldn't flash it before I am 100% sure it fits the p5113. I own the p5110 and they are indeed very similar, but who knows.... Take care of your Tab, mate.
BTW: why not CM10.1 stable? It works awesome, full wipe/factory reset, install zip through recovery, install recent gapps for CM10.1 (4.2.2) and after boot install Apex launcher and enjoy life
Sent from my amazing i9000 running CM10.1 by pawitp
tetakpatak said:
If I was you, I wouldn't flash it before I am 100% sure it fits the p5113. I own the p5110 and they are indeed very similar, but who knows.... Take care of your Tab, mate.
BTW: why not CM10.1 stable? It works awesome, full wipe/factory reset, install zip through recovery, install recent gapps for CM10.1 (4.2.2) and after boot install Apex launcher and enjoy life
Sent from my amazing i9000 running CM10.1 by pawitp
Click to expand...
Click to collapse
I hear you Its a paper weight right now though so thought id rather try as nothing else is doing the trick.
The tablets are my kids so i preferred to just give them an official stock version. I got put off using custom roms when i used paranoid android on my samsung galaxy 2 and it was real buggy. I just need my devices to work for the basics. I now run stock jelly bean on my GS2 but even that has crappy battery life, lucky for it to make it till 4pm and still be on and thats with moderate use. Couple of phone calls and a few text messages and a tiny bit or browsing. I know what is causing it though as it only starts to lose battery when im not on wi fi. It at least doesnt freeze and stop receiving phone calls altogether like PA did though. I used to miss a ton of work calls because the phone had actually frozen.
I love Apex though. I have Apex pro on my GS2 and its much better then the standard launcher. My daughter has the GS3 and it still does not rotate on the home and app screens which i find annoying.
dartd27 said:
I got put off using custom roms when i used paranoid android on my samsung galaxy 2 and it was real buggy. I just need my devices to work for the basics.
Click to expand...
Click to collapse
I've got your point, mate. :good:
Same with me: I need all the functions to work. The CM10.1 does it really, but my p5110 is wifi-only device so I'm not sure if CM10.1 is same good for your p5113. CM10.2 seems to be smooth and fast, but many apps aren't yet updated for 4.3 so I will wait a while before I flash it again.
I have cm10.1 on my p5113...it runs amazing...the p5113 owners most of the time have to flash the p5110 version because there is nothing different with the tabs besides the ir port..
Sent from my GT-P5110 using xda app-developers app
help me
hello guys,
i have the same problem with my p3100
in my case i cannot connect my tablet to my laptop and it is always looping
i already install the driver, odin, and kies
i already root my tablet
can anyone help me please??
obeye said:
hello guys,
i have the same problem with my p3100
in my case i cannot connect my tablet to my laptop and it is always looping
i already install the driver, odin, and kies
i already root my tablet
can anyone help me please??
Click to expand...
Click to collapse
Can you describe it bit more precised, mate? Don't panic, so far it doesn't sound so bad....
tetakpatak said:
Can you describe it bit more precised, mate? Don't panic, so far it doesn't sound so bad....
Click to expand...
Click to collapse
okay, thanks mate
the problem is my tab always looping whenever I turn it off
I already try wipe at CMW mode,
but it is always restart and nothing happen and its still looping
I already try install the OS, but its aborted
i trying to flash it with Odin, but my laptop cannot read my tab
its been 3 day my tab cannot turn on
obeye said:
okay, thanks mate
the problem is my tab always looping whenever I turn it off
I already try wipe at CMW mode,
but it is always restart and nothing happen and its still looping
I already try install the OS, but its aborted
i trying to flash it with Odin, but my laptop cannot read my tab
its been 3 day my tab cannot turn on
Click to expand...
Click to collapse
Can you reach the download mode? (press 2 buttons at same time: volume down and power button)
OK, yes- you need same Odin version as Tabs 51xx, this is link for Odin 3.07:
http://hotfile.com/dl/161620048/6c6d559/Odin3_v3.07.rar.html
Try pressing the buttons with the charger plugged in, as well as plugged out, that is little trick with the p51xx Tabs
tetakpatak said:
Can you reach the download mode? (press 2 buttons at same time: volume down and power button)
OK, yes- you need same Odin version as Tabs 51xx, this is link for Odin 3.07:
Try pressing the buttons with the charger plugged in, as well as plugged out, that is little trick with the p51xx Tabs
Click to expand...
Click to collapse
Thanks mate!
already done!!
its work!
thank you so much!!
obeye said:
Thanks mate!
I already install ROM JB on my tab
but its still looping in samsung logo,
i read that i should install CWM, but when i install it, it says that "verification failed"
what should i do??
Click to expand...
Click to collapse
Great, I am glad to hear it did charger cable trick help?
Just to make sure: you must be sure to flash a stock ROM first (not JB based custom ROM), after it you will have revived Tab without root. After that normal proceeding: root it, install CWM recovery or custom kernel that fits your ROM (or even whole custom ROM) which already features the CWM recovery.
The stock recovery (3e) checks the signature so of course you can't flash any custom zips. CWM recovery has an option "toggle signature verification" where one can disable signature check. Then you can flash whatever you want, just take care that all you ever flash must be absolutely compatible for your device.
---------- Post added at 03:45 PM ---------- Previous post was at 03:21 PM ----------
obeye said:
Thanks mate!
I already install ROM JB on my tab
but its still looping in samsung logo,
i read that i should install CWM, but when i install it, it says that "verification failed"
what should i do??
Click to expand...
Click to collapse
One more thing mate, look at this video which I've posted on YouTube last January:
http://www.youtube.com/watch?v=0NXBN9Z63TY
It describes how to get rid of the signature verification problem. For the reason that quite many people don't understand english well, I have made a speechless video added by step by step description in the text (video description) so people can just copy the text and paste it into their translators.
If one ROM that you have flashed bootloops on the logo just try another ROM. It happens sometimes. Important is that you should always before flashing another ROM make full wipe: (data/factory reset/cache/dalvik) in your recovery mode.
Did you do it?
Please let me know if you were successful, it should work now! Good luck :fingers-crossed:
It works!
Thanks everyone for your feedback!!!
and my apologies for late response.
I followed the advise to (re)flash stock rom and it worked!
After that i rooted it again, installed another recovery and now have the latest stock rom working perfectly.
For those who get the same problem and the tabled keeps rebooting - just plug it into recharger and keep the on/off button until it turns off. Then you can fully charge it before you attempt to flash rom.
Once again, thanks a lot!
PS. now i am considering installing CM10.1
Starojitski said:
Thanks everyone for your feedback!!!
and my apologies for late response.
I followed the advise to (re)flash stock rom and it worked!
PS. now i am considering installing CM10.1
Click to expand...
Click to collapse
Great! Congratulations
Yes, install CM10.1.1 with gapps for 4.2.2 it works great, all the functions. Just mind that you can not restore nandroid backups made with other kernel, (sometimes also not if done with older CWM recovery version) and also apps backups made by Titanium backups in older systems aren't good idea to restore once you upgrade to CM10x
If you want to return for any reason to your old (current) ROM, do the same procedure like by unbricking
I think i did something stupid. Yesterday I decided to upgrade de modem/radio on my Note 3 running on ProBAM 1.3.3. I flashed CP-modem-NE6.tar. I was on CP_N9005XXUENC2.tar.md5 radio/modem with bootloader BL_N9005XXUEND6.tar. I was using the normal kernel which came with the rom.
After this update everything seemed to work okay. Until I decided to make a phonecall. Then my phone got hung up and I had to reboot. After the reboot the calling issue was not fixed. I tried flash back to my former radio/modem but that didn't work as well. Only mobile internet 3G/4G/HSDPA works and my phone has signal, but i cannot receive calls (i dont hear a ringtone) and make calls myself.
So I decided to make a full wipe of system, data, sdcard and start from scratch with a full Samsung Stock rom. I used this one: N9005XXUEND3_N9005PHNEND1_N9005XXUENC2_HOME.tar.md5. PHN is the CSC code for The Netherlands. The rom installs fine in Downloading Mode. After installing i went to the stock recovery and did a system reset/wipe and cleared the cache partition. Then the rom booted fine. What is strange is that i dont hear the standard bootsound during booting. For me this was a clue that something is not good. I still can't receive and make calls and my phone don't function anymore like it should. The sound buttons react very slow, camera doesn't work anymore. The samsung music app makes my phone to hang etc.
Has anyone have a clue on what can be wrong and how to correct it?
TheWizzard2203 said:
I think i did something stupid. Yesterday I decided to upgrade de modem/radio on my Note 3 running on ProBAM 1.3.3. I flashed CP-modem-NE6.tar. I was on CP_N9005XXUENC2.tar.md5 radio/modem with bootloader BL_N9005XXUEND6.tar. I was using the normal kernel which came with the rom.
After this update everything seemed to work okay. Until I decided to make a phonecall. Then my phone got hung up and I had to reboot. After the reboot the calling issue was not fixed. I tried flash back to my former radio/modem but that didn't work as well. Only mobile internet 3G/4G/HSDPA works and my phone has signal, but i cannot receive calls (i dont hear a ringtone) and make calls myself.
So I decided to make a full wipe of system, data, sdcard and start from scratch with a full Samsung Stock rom. I used this one: N9005XXUEND3_N9005PHNEND1_N9005XXUENC2_HOME.tar.md5. PHN is the CSC code for The Netherlands. The rom installs fine in Downloading Mode. After installing i went to the stock recovery and did a system reset/wipe and cleared the cache partition. Then the rom booted fine. What is strange is that i dont hear the standard bootsound during booting. For me this was a clue that something is not good. I still can't receive and make calls and my phone don't function anymore like it should. The sound buttons react very slow, camera doesn't work anymore. The samsung music app makes my phone to hang etc.
Has anyone have a clue on what can be wrong and how to correct it?
Click to expand...
Click to collapse
Short Story - Modem Should match the rest of the firmware. Flash the Stock NE6 Full rom which you pulled out the Modem from. Things should be back to normal. Made the Same Mistake with NE3. Dont flash and try to fix it in another way, You might lose the IMEI resulting in a visit to the Service Center.
P.S - Some "wannabe" will point out that this post needs to be in the Q&A Section soon.
Problem is that i only have that modem file CP-modem-NE6.tar and flashed that onto my existing rom. I don't even know which stock rom it was pulled from. To test I just flashed N9005DXUENE3_N9005OLCENE4_N9005DXUENE2_HOME.tar.md5 but nothing has changed about this problem. What is the next step?
JazonX said:
Short Story - Modem Should match the rest of the firmware. Flash the Stock NE6 Full rom which you pulled out the Modem from. Things should be back to normal. Made the Same Mistake with NE3. Dont flash and try to fix it in another way, You might lose the IMEI resulting in a visit to the Service Center.
P.S - Some "wannabe" will point out that this post needs to be in the Q&A Section soon.
Click to expand...
Click to collapse
TheWizzard2203 said:
Problem is that i only have that modem file CP-modem-NE6.tar and flashed that onto my existing rom. I don't even know which stock rom it was pulled from. To test I just flashed N9005DXUENE3_N9005OLCENE4_N9005DXUENE2_HOME.tar.md5 but nothing has changed about this problem. What is the next step?
Click to expand...
Click to collapse
Flashing NE3 wont solve your problem. Find the NE6. You might get lucky in samfirmware.com
JazonX said:
P.S - Some "wannabe" will point out that this post needs to be in the Q&A Section soon.
Click to expand...
Click to collapse
Those "Wannabes" would be right and because of Guys like you, these "Wannabes" that could easily help out doesn't care about others people's Phones anymore...
Gesendet von meinem SM-N9005
TheWizzard2203 said:
I think i did something stupid. Yesterday I decided to upgrade de modem/radio on my Note 3 running on ProBAM 1.3.3. I flashed CP-modem-NE6.tar. I was on CP_N9005XXUENC2.tar.md5 radio/modem with bootloader BL_N9005XXUEND6.tar. I was using the normal kernel which came with the rom.
After this update everything seemed to work okay. Until I decided to make a phonecall. Then my phone got hung up and I had to reboot. After the reboot the calling issue was not fixed. I tried flash back to my former radio/modem but that didn't work as well. Only mobile internet 3G/4G/HSDPA works and my phone has signal, but i cannot receive calls (i dont hear a ringtone) and make calls myself.
So I decided to make a full wipe of system, data, sdcard and start from scratch with a full Samsung Stock rom. I used this one: N9005XXUEND3_N9005PHNEND1_N9005XXUENC2_HOME.tar.md5. PHN is the CSC code for The Netherlands. The rom installs fine in Downloading Mode. After installing i went to the stock recovery and did a system reset/wipe and cleared the cache partition. Then the rom booted fine. What is strange is that i dont hear the standard bootsound during booting. For me this was a clue that something is not good. I still can't receive and make calls and my phone don't function anymore like it should. The sound buttons react very slow, camera doesn't work anymore. The samsung music app makes my phone to hang etc.
Has anyone have a clue on what can be wrong and how to correct it?
Click to expand...
Click to collapse
Did you write only the modem or you also wrote NON-HLOS.bin? Also sometimes it is said that you also need to flash the corresponding RIL.
I wrote both files. First modem.bin and then took out the battery, replaced it and booted to download mode again and flashed non-hlos.bin and again pulled the battery, put it back and booted the rom.
xclub_101 said:
Did you write only the modem or you also wrote NON-HLOS.bin? Also sometimes it is said that you also need to flash the corresponding RIL.
Click to expand...
Click to collapse
Until you get on a NE6 firmware (Same version the Modem CP was pulled from), Nothing else will help. I went through this path. It was a headache Mate. However NE6 Firmware is not that bad. Just the uneasy feeling that It's not XX, but a DX.
HSD-Pilot said:
Those "Wannabes" would be right and because of Guys like you, these "Wannabes" that could easily help out doesn't care about others people's Phones anymore...
Gesendet von meinem SM-N9005
Click to expand...
Click to collapse
Sorry Mate, Obviously didn't meant to hurt your feelings. It was a random thought which I dedicated to a few "certain users" who reply - "this should be in Q&A" without answering the poor soul's question.
Some time ago here in XDA, In a situation like this, First we see the answers, then a moderator silently moves this to Q&A and put up a warning to the bloke who made the mistake. Unfortunately nowadays, just as soon as people see the thread is in the wrong section, they just bark as if they suddenly turned blind to the problem OP is having. Mistakes are not made purposely, and obviously these are people who's new to forum.
I went through the same problem by jumping to the NE6 modem a few days ago. So I know how this agony feels.
Man kann die Natur nicht ändern.
No one can hurt my feelings in an Forum, so no prop
The point is, the Rules are sticked on top >
http://forum.xda-developers.com/showthread.php?p=46416908
So when i'm new on an Forum the first thing should be reading and respecting these.
I was Mod in an German Smartphone Forum (Handy-Faq) and i know it's an pain in the ass always remembering people to follow the rules and move unmatched stuff into the right sections. Mods usually don't get paid and doing this in her Freetime. They're trying to provide and clean Forum and this takes a lot of time, especially in such an huge Forum like XdA.
So it shouldn't be that hard to take the time and read at least the sticked Stuff, before posting...
Just think, you're coming home from work and open the Forum. The first thing you'll have to do is to go through the Threads and move this and that, simply because it's posted wrong or there's already an Thread about it. For Example there are meanwhile a couple of Threads about this Problem in Q&A. So I instead of helping people you used 30min or more to clean the Threads.
Gesendet von meinem SM-N9005
The problem is that on Sammobile.com i only can find firmware version N9005ZHUENE6 and i cannot get this firmware to flash correctly to the phone. It keeps telling the the system partition cannot be written because it doesn't match the phone orso...
TheWizzard2203 said:
The problem is that on Sammobile.com i only can find firmware version N9005ZHUENE6 and i cannot get this firmware to flash correctly to the phone. It keeps telling the the system partition cannot be written because it doesn't match the phone orso...
Click to expand...
Click to collapse
ZH Series is for Hongkong. Hong Kong N9005 is 16GB, so yeah It will not flash to the 32GB version.
Check the thread where you found the Modem from, The Link for the Rom will be there.
Stupid thing and together lucky is that i just flashed the NE4 radio and all seems to be back to normal again. Phone is again fast and everything seems to work again. Now I have to test with making calls.
Will report back later this evening.
[Q&A] [ODIN][TAR][5.0] SM-G900P OA6 (Official!) - Full Restore (ROM, Modem, Kernel)
Q&A for [ODIN][TAR][5.0] SM-G900P OA6 (Official!) - Full Restore (ROM, Modem, Kernel)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ODIN][TAR][5.0] SM-G900P OA6 (Official!) - Full Restore (ROM, Modem, Kernel). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hangouts not sending MMS.
Hi XDA community! I have installed the official build of 5.0 and have rooted, debloated, and de-knoxed. But, I cannot for the life of me get hangouts to send MMS. I prefer hangouts to the regular MMS app as the picture quality in it is terrible and I like having my SMS and Hangout sessions merged. I have tried messing with APNs but cannot get Hangouts to send a single MMS.
Please help!
Thanks.
---------- Post added at 09:52 AM ---------- Previous post was at 09:47 AM ----------
Can anyone please tell me how I can enable the Native Hotspot? In previous versions of android I was able to use the Galaxy Tools but that seems to break the OS and forces me to do a factory reset.
Thanks!
Hi does anyone know why i can't install this pandora on any 5.0 it works perfectly on kk bit not lollipophttps://oldpiratebay.org/torrent/11474879/Pandora-5-2-apk
Flashing Debloat tool/Knox counter reset
I just flashed the stock rom and had a couple of questions. I noticed I lost root and my custom recovery which I expected, but still want to flash the debloat tool and knox counter reset. When you boot into the standard android recovery, do choose the update from external storage option to flash? Does the standard recovery automatically unzip files? Sorry for the noob questions as I was used to custom recovery and didnt want to mess things up. Thanks in advance.
Can I flash this over Rwilcos 1.6TD 4.4
I just want to verify I can safely flash this over my current 4.4 Rwilco's Mostly Stock Rom. Will Odin flash a new bootloader or do I need to do this before I go installing lollipop? Thanks in advanced for any help.
darussian55 said:
I just want to verify I can safely flash this over my current 4.4 Rwilco's Mostly Stock Rom. Will Odin flash a new bootloader or do I need to do this before I go installing lollipop? Thanks in advanced for any help.
Click to expand...
Click to collapse
The tar will overwrite and erase everything, including root, and will update everything including bootloader and modem.
Flash77 said:
I just flashed the stock rom and had a couple of questions. I noticed I lost root and my custom recovery which I expected, but still want to flash the debloat tool and knox counter reset. When you boot into the standard android recovery, do choose the update from external storage option to flash? Does the standard recovery automatically unzip files? Sorry for the noob questions as I was used to custom recovery and didnt want to mess things up. Thanks in advance.
Click to expand...
Click to collapse
You will need to root with CFAR which is linked to in the second post of the official 5.0 thread. Then ODIN flash a custom recovery. I used philz. You will be able to flash those files only through a custom recovery from my experience. Your results may vary. Good luck.
toker562 said:
Hi does anyone know why i can't install this pandora on any 5.0 it works perfectly on kk bit not lollipophttps://oldpiratebay.org/torrent/11474879/Pandora-5-2-apk
Click to expand...
Click to collapse
I am unsure about version 5.2 but I installed 5.5 on mine and it works great.
Cross post from original thread since there are no responses and this is now the dedicated Q&A for this ROM.
Why is it with the stock ROM(rooted/hotspot via galaxy tools), Wifi calling has such a terrible lag? When running MOAR 2.2, Wifi calling was perfect no lag.
Any ideas or tweaks that don't involve flashing MOAR or another custom ROM since I am content with stock?
mrrsquared1979 said:
Cross post from original thread since there are no responses and this is now the dedicated Q&A for this ROM.
Why is it with the stock ROM(rooted/hotspot via galaxy tools), Wifi calling has such a terrible lag? When running MOAR 2.2, Wifi calling was perfect no lag.
Any ideas or tweaks that don't involve flashing MOAR or another custom ROM since I am content with stock?
Click to expand...
Click to collapse
I cant say but we'll have to see how this release plays out since its only been available for several days.
I haven't heard any comments about that issue yet but like I said, its still very new. You could always try flashing the stock deodexed build I posted in Sprint android development to see if it makes any difference too. Its already pre-rooted with hotspot enabled too btw.
Viper4Android running on OA6 lollipop sgs5
Having trouble getting Viper4Android driver to function properly on OA6 on my rooted SGS5, can anyone guide me through this?
arwarburg said:
Having trouble getting Viper4Android driver to function properly on OA6 on my rooted SGS5, can anyone guide me through this?
Click to expand...
Click to collapse
I've been trying the same thing
I've done all the steps
I would post in all the threads, especially because you have the ability to!
That's what I've been doing trying to get a good answer.
arwarburg said:
I would post in all the threads, especially because you have the ability to!
That's what I've been doing trying to get a good answer.
Click to expand...
Click to collapse
I've seen so many ppl with it working then without.. There's no clear way to go about it I've seen. I check several times a day in multiple threads for updates on this and a few other things. Not really worried, it'll come soon enough
BootLoop from Deox
Anyone have a bootloop issue after flashing the Deox version?
All went well with rooting, original restore, etc... however, I tried flashing the Deox link file and when it boots up, it just goes to a screen with numbers, and android under it, with circles spinning like a clock above it all....
Or am I just being impatient and it is taking long to load?
someoneshero34 said:
Anyone have a bootloop issue after flashing the Deox version?
All went well with rooting, original restore, etc... however, I tried flashing the Deox link file and when it boots up, it just goes to a screen with numbers, and android under it, with circles spinning like a clock above it all....
Or am I just being impatient and it is taking long to load?
Click to expand...
Click to collapse
Deodexed lollipop will always take at least 15-20 minutes on the first boot or when flashing a framework mod.
reedc83 said:
I am unsure about version 5.2 but I installed 5.5 on mine and it works great.
Click to expand...
Click to collapse
I have pandora 5.5 on Lollipop and it works fine as well.
Somebody please help! I am racking my brain on why i cannot load the OA6 full restore onto my sprint G900P. I had no problem restoring the leaked NKD Lollipop and have been running on it for some time. When i load the new software Odin 3.09 loads all the files and when its done the stock recovery does dot boot it stays at the samsung splash screen and freezes when it says " opening recovery" and never loads or continues.
The second thing that is strange is is it will not allow me to revert back to the stock NE5 firmware either. I am basically stuck on the NKD firmware. Some instruction would help, thank you.
jpet11580 said:
Somebody please help! I am racking my brain on why i cannot load the OA6 full restore onto my sprint G900P. I had no problem restoring the leaked NKD Lollipop and have been running on it for some time. When i load the new software Odin 3.09 loads all the files and when its done the stock recovery does dot boot it stays at the samsung splash screen and freezes when it says " opening recovery" and never loads or continues.
The second thing that is strange is is it will not allow me to revert back to the stock NE5 firmware either. I am basically stuck on the NKD firmware. Some instruction would help, thank you.
Click to expand...
Click to collapse
Did you power the phone off first before going into download mode so you could use Odin?
Yes of course
Ive wiped and re wiped.... I have even tried to go back to ne5 and ni3 and I am completely stuck on NKD...... It wont let me flash flowers or backward from the leaked version but when I odin the tar for nkd it reboots just Fine.... Do I need to you a different version of odin?.... Im using 3.09 I see everyone else leaving just Fine.... I just dont get it ive been flash in with odin since my s2 im not a rookie.... How do I get off this base and.... It should by all means bout recovery after the full restore and it just sitting there after I flash anything else but the NKD
So i used odin to install a rom from my phone i found last night, but this marshmallow rom doesn't connect to my mobile network. I tried installing a older rom from odin, but of course it won't let me. what do i need to do to fix this?
nvm, did the non auto reboot and pulled out the battery, did the trick.
since you have been doing this for 2 years, anything interesting i should try? i just upgraded from 4.4.2, to 6.0.1, installed twrp and superuser, any neat stuff i should try?
what baseband are you on?
---------- Post added at 11:39 AM ---------- Previous post was at 11:32 AM ----------
and why are you using odin to flash roms? thats not highly recommended when youre not in need of changing your firmware. what tar.md5 file did you flash? if its not connecting to your network, it could have been a tar.md5 for a different S5. here is the link for the 6.0.1 PCA tarball and here is the link for the OK4 tarball. Im currently using the OK4 one and its pretty solid, but if you want the ability to flash ROMs, then you want to stay away from the PCA baseband
sorry, too noob to know what baseband i was in. all i know its a sprint phone, g900p and my original was 4.4.2. i've been trying to flash roms from http://rwilco12.com/downloads.php?dir=Files/Devices/Samsung Galaxy S5 (Sprint) (SM-G900P)/Stock ROMs
but they all have the same problem, it stops at like 1% probably cause i'm trying to revert to a old version, must of flash 20 roms i found on the internet... i'm looking for a kitkat version that would work. I would think thats my biggest problem, just haven't found a stock rom that works. Would i need to clear anything with twrp first?
thanks for the help, this lolipop rom works great
yes, and it might need for you to fix permissions too. do a factory reset (i always recommend doing it 3 times), delete the android folder in both internal and external storage, and then try to flash the ROM again. Id also upgrade to at least OK4 via Odin. After doing that, youll have to reflash TWRP. That should clear up any issues youre having
OK4 tar.md5
---------- Post added at 12:21 PM ---------- Previous post was at 12:17 PM ----------
no problem. let us know if you run into any other issues. ive had my S5 since launch week (over 2 years) and its been rootd, flashed, rommed, sim unlocked etc etc so many times, its pretty nuts
also, even if your ROM is working well, it would still be wise to get on OK4. Its just a better baseband
could you help me with installing twrp? i downloaded this https://dl.twrp.me/klte/ from the website, its should be simple to install like flashing the roms, but i did it a few times, but when i boot into recovery mode, its still using the android version. like nothing has changed.
it has to be a tar.md5 file and flash it in Odin using the AP slot. Put your phone into download mode (pull the battery, put it back and press and hold, volume down and home, while still pressing those two press the power button until the phone vibrates and then release the power butt while still holding the other 2), itll ask you if you want to continue, select yes. If you need more info about how to use Odin, let me know
Hi guys,
I wrote a thread over on zukfans.eu, basically I factory reset my phone on one of the stock roms and it has corrupted my modem, or destroyed my data in my CQN. The long and the short of it is that i have no service and the radio is off, i can't fix it, and no one is helping me over there so maybe someone here will know. How can i flash the modem to my phone, do i just do it in fastboot? Does anyone have a modem file? Can someone backup their CQN for me so i can see if that will fix it (instructions in the thread at zukfans.eu here)?
I've tried flashing stock roms in both QPST & MiFlash and also tried installing via twrp, no luck on any of it. I'm currently on the indian rom 2.0.111 ST with unlocked bootloader and TWRP. I'd really appreciate it if someone could tell me what to do or point me in the right direction.
Cheers
it seems that there are so many people having the same problem.
My modem has been corrupted today on the original room mounted from bangggod, I had bought it 1 month ago.
As you did, I tried several other roms and also the QFIL solution without luck.
I have written a mail to zuk and to banggod asking for an explanation....
It looks like an hw problem.
Flashing modem, which one, updates?
Same here as sooooo many people. Done many things, nothing working yet. I am still hoping not hardware problem.
I see many posts about reflashing modem. Never sure which modem file to download though, and from where.
Also, not obvious to me (new at this) when I flash the ROM does it automatically flash a new modem file? Or does it see one is there and not flash it? I have tried Mokee and others, went back to locked stock 1.9 and now I am downloading official Nougat update and hoping it will flash/fix modem in process. Great phone otherwise. I am crushed.
(edit: I update to AICP instead, nice!, but still no working modem. I do get a switch to turn on radio in phone info though, but nothing. Looking like hardware indeed, but I am still hoping someone will find an answer)