Hi
So, i'm going to root my S6 and flash a custom rom, got 1 question:
Reading the CF-AutoRoot page, it mentions something about battery drain because of wakelocks after rooting, and that i need to flash an update zip file to fix it.
Do i still need to do that after rooting ? Or has it been already fixed and thus i can just root and flash the rom i want ?
Thanks <3
No one?
CF-auto root doesn't work on firmware 5.1.1 you will have to flash unikernel found here http://forum.xda-developers.com/gal...d-development/kernel-stockmod-kernel-t3100395 using Odin then flash https://dl.twrp.me/zeroflte/ custom recovery using flashify (found in the playstore) and you will be rooted with a custom recovery and ready to flash a custom rom
You can try this
http://androiding.how/how-to-root-galaxy-s6-on-android-5-1-1-all-variants/
Related
Hi Guys,
I've got an S6 Australian SM-G920i version. Done the root option and done the twrp recover flash in odin however i keep getting stuck at Samsung Logo. Tried root first and then flash twrp that didn't work, tried twrp first then tried to boot to recovery to root from twrp and still no go. teamwin says it compaitible with SM-G920i version tried TWRP 2.8.6.0 and TWRP 2.8.6.2 still no go.
Please help if any of you know of a work around.
Thanks in advance
Hello hoglak
I have a 920I and was also having the same problem.
I solved the problem flashing the latest version of the rom from SamMobile site.
After flashing the rom your TWRP should work.
Tbnitz said:
Hello hoglak
I have a 920I and was also having the same problem.
I solved the problem flashing the latest version of the rom from SamMobile site.
After flashing the rom your TWRP should work.
Click to expand...
Click to collapse
Can you tell me which specific rom you tried i downloaded latest I can find for Aus rom but still having the same issue. Any chance give a step by step guide on what you did exactly.
Thanks in advance
I just used the New Zealand firmware.
I am from Brazil and with the orginal rom the same thing happened, im flashed the generic one and worked.
This one seems to be the general rom to Australia
http://www.sammobile.com/firmwares/database/SM-G920I/XSA/
But i used the zto version from Brazil
hoglak said:
Hi Guys,
I've got an S6 Australian SM-G920i version. Done the root option and done the twrp recover flash in odin however i keep getting stuck at Samsung Logo. Tried root first and then flash twrp that didn't work, tried twrp first then tried to boot to recovery to root from twrp and still no go. teamwin says it compaitible with SM-G920i version tried TWRP 2.8.6.0 and TWRP 2.8.6.2 still no go.
Please help if any of you know of a work around.
Thanks in advance
Click to expand...
Click to collapse
I had the same problem. The latest firmware for unbranded (XSA) Australia on sammobile is AOC4. I had success with using the Singapore unbranded (XSP) firmware AOD1.
Flash AOD1 with Odin then you have stock everything. You should be able to flash TWRP 2.8.6.2 with Odin and boot successfully into Custom recovery.
You can either take two options from here.
Flash CF-Root and "just root" the stock ROM - Boot into Download (again) and then flash the CF Root.
Flash a ROM or a Mod which has Root included. - My first success was Wiping with stock recovery, flashing AOD1 clean with Odin, then flashing WanamMod on top of it as it included root.
Aussie G920i.
Hope this helps.
d2d2d2d2 said:
I had the same problem. The latest firmware for unbranded (XSA) Australia on sammobile is AOC4. I had success with using the Singapore unbranded (XSP) firmware AOD1.
Flash AOD1 with Odin then you have stock everything. You should be able to flash TWRP 2.8.6.2 with Odin and boot successfully into Custom recovery.
You can either take two options from here.
Flash CF-Root and "just root" the stock ROM - Boot into Download (again) and then flash the CF Root.
Flash a ROM or a Mod which has Root included. - My first success was Wiping with stock recovery, flashing AOD1 clean with Odin, then flashing WanamMod on top of it as it included root.
Aussie G920i.
Hope this helps.
Click to expand...
Click to collapse
I'll give this a go tonight hopefully it will work.
Thanks mate
d2d2d2d2 said:
I had the same problem. The latest firmware for unbranded (XSA) Australia on sammobile is AOC4. I had success with using the Singapore unbranded (XSP) firmware AOD1.
Flash AOD1 with Odin then you have stock everything. You should be able to flash TWRP 2.8.6.2 with Odin and boot successfully into Custom recovery.
You can either take two options from here.
Flash CF-Root and "just root" the stock ROM - Boot into Download (again) and then flash the CF Root.
Flash a ROM or a Mod which has Root included. - My first success was Wiping with stock recovery, flashing AOD1 clean with Odin, then flashing WanamMod on top of it as it included root.
Aussie G920i.
Hope this helps.[/QUO
Thanks mate that worked perfectly.
Click to expand...
Click to collapse
Hey, I want to flash twrp and unikernel on my 5.1.1 BOFJ galaxy s6 g920f but I don't know really how, can I flash twrp without root and then flash Unikernel with twrp?
Someone used this and can explain me how?
I believe there are plenty of posts of how to do it.
First unlock bootloader on 5.1.1. Then the order doesn't pretty matter much. Get latest TWRP on their official hompage (tar) and unikernel and flash them through ODIN.
I did first Unikernel and after TWRP, worked just fine.
You don't even need TWRP, just flash or OTA to 5.1.1 and then flash a new kernel into the phone and you're done.
Hi all,
Thank you firstly for the site, has been very helpful for me over the years.
The last time I root'ed my S6 was with BOE3, but I can't quite remember how I did it.
I think from memory, after flashing the ROM in ODIN, this overwrote my TWRP Recovery with stock recovery. I then flashed TWRP again using ODIN, and used Chainfire's CF-Root (Not AutoCF-Root). and flashed this from within TWRP Recovery.
Does this sound correct? I'll write it down this time when I go ahead and do it.
Not too bothered about KNOX or Samsung Pay.
Thanks in advance
Sounds correct. I think the cf-root file includes SuperSu and busybox!? You cn also Flash the latest SuperSu zip instead of the cf-root but both are fine.
Hi,
I have a Note edge N915W8 which i updated to 5.1.1 the moment it became available on Sammobile (big mistake). as everyone knows, i lost root in the process. And no root availble at this time.
Important history of the phone:
I acquired the device from a friend that had rooted it when it was in its original stock 4..4.4 config. He then tried to flash a custom rom which ended up in a bootloop which he was unable to recover from because there wasn't a stock rom available at the time. Long story short, I ended up with a bootlooped Note Edge and after a week i managed to acquire someones backup zip from XDA -- which i then used to free my device from the loop and function properly with root.
I got too eager and flashed the 5.1.1 without reading up on it and lost root.
So, i was hoping there would be a way or method that i could use that would allow me to use that same custom recovery backup of 4.4.4, only this time be able to flash it through odin on my stock 5.1.1
Any advice would help.
Thanks
From what I know once you take 5.1 update you cant backroll to 4.4.4.
BOOTLOADER was patch'd BY the GREATS to throw another wrech in our plans!
And also I do blv there is ROOT for 5.1 but it trips knox & you have to install twrp thru Odin then flash SUPERSU & BEASTMODE Kernel that allows root and then take root
READ THIS
http://forum.xda-developers.com/not.../root-supported-kernel-5-1-1-testers-t3176651
Ickyz said:
From what I know once you take 5.1 update you cant backroll to 4.4.4.
BOOTLOADER was patch'd BY the GREATS to throw another wrech in our plans!
And also I do blv there is ROOT for 5.1 but it trips knox & you have to install twrp thru Odin then flash SUPERSU & BEASTMODE Kernel that allows root and then take root
READ THIS
http://forum.xda-developers.com/not.../root-supported-kernel-5-1-1-testers-t3176651
Click to expand...
Click to collapse
Thanks I appreciate it.
just out of curiosity, Are you running a rooted 5.1? or have you heard any feedback about this method
Sent from my SM-N915W8 using X D A Free mobile app
itsmemikeeey said:
Thanks I appreciate it.
just out of curiosity, Are you running a rooted 5.1? or have you heard any feedback about this method
Sent from my SM-N915W8 using X D A Free mobile app
Click to expand...
Click to collapse
No I cant get Twrp 2 flash thru Odin as md5 everything I download comes out as IMG & that does me no good
Hi Guys.
I've reached a state of confusion reading about OTA-updates, TWRP and root. My question question is this:
I installed TWRP, flashed the verity opt encryption kernel and rooted my G930F. Everything works and all is good. But with the new Chainfire AUTO-ROOT (is it X.72?) OTA-updates has been disabled.
I'm confused about the reason for this. Does this mean that I risk bricking my phone if I at some point in timez deside to flash stock rom via ODIN? Or will this just replace TWRP with original recovery and overwrite root?
Sorry for my noob-mind. I'm new to Samsung devices.
Best regards.
If you flash stock rom via Odin TWRP will be deleted and stock recovery will be installed. You will also lose root privileges. Make sure you have a backup before flashing stock via Odin. Once restored stock rom via odin follow same steps you took the first time you rooted your phone.
Leeum said:
If you flash stock rom via Odin TWRP will be deleted and stock recovery will be installed. You will also lose root privileges. Make sure you have a backup before flashing stock via Odin. Once restored stock rom via odin follow same steps you took the first time you rooted your phone.
Click to expand...
Click to collapse
Thanks alot!