Random reboots (restart reason = 77665501) - Verizon HTC One (M8)

Had my M8 Since Nov 2014 and almost immediately installed CM. Been on CM11m12 for 6+ months and the phone has been fine. softkey area of screen started to die, so got a replacement M8 from VZW. Restored everything via nandroid and all seemed well.... until the phone now will randomly reboot -- even when I'm not using it and its just sitting on the desk. pulled logcat, etc and it appears something is causing it to shutdown, but I'm unable to determine exactly what.
Thoughts?
Code:
[69899.843696] c0 27034 wakeup sources: 'PowerManagerService.WakeLocks' 'PowerManagerService.Display' 'radio-interface' 'ges_wake_lock', time left 148 ticks;
[69900.771346] c3 263 pid:263(vold)(parent:1/init) (mmcblk1p1) umounted filesystem.
[69900.773494] c3 263 pid:263(vold)(parent:1/init) (fuse) umounted filesystem.
[69900.790603] c3 263 pid:263(vold)(parent:1/init) (mmcblk1p1) umounted filesystem.
[69900.814516] c3 1 init: untracked pid 1152 exited
[69901.558108] c2 26076 binder: 25885:26076 transaction failed 29189, size 184-0, brdr_fp 33
[69901.558296] c2 26076 binder: 25885:26076 transaction failed 29189, size 184-0, brdr_fp 33
[69901.558435] c2 26076 binder: 25885:26076 transaction failed 29189, size 184-0, brdr_fp 33
[69901.558520] c2 26076 binder: 25885:26076 transaction failed 29189, size 184-0, brdr_fp 33
[69901.558596] c2 26076 binder: 25885:26076 transaction failed 29189, size 184-0, brdr_fp 33
[69901.558674] c2 26076 binder: 25885:26076 transaction failed 29189, size 184-0, brdr_fp 33
[69901.744472] c3 1 init (1:1) triggered SysRq
[69901.744484] c3 1 SysRq : Emergency Remount R/O
[69901.747732] c3 26064 pid:26064(kworker/3:0)(parent:2/kthreadd) (mmcblk0p39) umounted filesystem.
[69901.747817] c3 26064 zcache: destroyed pool id=3, cli_id=65535
[69901.786145] c3 26064 pid:26064(kworker/3:0)(parent:2/kthreadd) (mmcblk0p27) umounted filesystem.
[69901.786233] c3 26064 zcache: destroyed pool id=4, cli_id=65535
[69901.846377] c3 26064 EXT4-fs (mmcblk0p49): re-mounted. Opts: (null)
[69901.894739] c3 26064 EXT4-fs (mmcblk0p48): re-mounted. Opts: (null)
[69901.896789] c3 26064 EXT4-fs (mmcblk0p22): re-mounted. Opts: (null)
[69901.896946] c3 26064 Emergency Remount complete
[69901.945742] c3 1 kernel_restart: system_dirty=1
[69901.945758] c3 1 notify_efs_sync_call: board_mfg_mode=0
[69901.945771] c3 1 [K] set_modem_efs_sync: wait for modem efs_sync
[69902.309964] c1 0 CPU1: msm_pm_power_collapse: change clock rate (old rate = 0)
[69902.596923] c3 26022 [LED]qpnp_led_set id: 1 value 0 status: 255
[69902.818060] c1 0 CPU1: msm_pm_power_collapse: change clock rate (old rate = 0)
[69902.871122] c2 0 CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
[69902.873906] c3 25630 msm_vidc: 4: Opening video instance: eaf83000, 0
[69902.886963] c3 25630 pil_venus fdce0000.qcom,venus: venus: loading from 0x0f500000 to 0x0fa00000
[69902.938865] c3 25630 pil_venus fdce0000.qcom,venus: venus: Brought out of reset
[69902.953430] c3 1 check_modem_efs_sync_timeout: modem efs_sync done.
[69902.953442] c3 1 [FLT]TPS reboot_notify_sys: 1
[69902.953449] c3 1 [FLT]TPS flashlight_turn_off
[69902.953851] c3 1 [FLT]TPS flashlight_turn_off 0
[69902.955103] c3 1 mdss_fb_release_all: try to close unopened fb 2! from init
[69902.955118] c3 1 mdss_fb_release_all: try to close unopened fb 1! from init
[69902.964096] c3 26078 msm_vidc: 4: Closed video instance: eaf83000
[69902.966931] c3 1 mdss_fb_release_all: remove process init from tracking, pid=1 mfd->ref_cnt=0
[69902.966943] c3 1 mdss_fb_release_all: unknown process init pid=1 mfd->ref=0
[69902.966967] c3 1 [<c010c19c>] (unwind_backtrace+0x0/0x11c) from [<c041b3c4>] (mdss_fb_release_all+0x368/0x4a0)
[69902.966982] c3 1 [<c041b3c4>] (mdss_fb_release_all+0x368/0x4a0) from [<c041b528>] (mdss_fb_shutdown+0x2c/0x3c)
[69902.966997] c3 1 [<c041b528>] (mdss_fb_shutdown+0x2c/0x3c) from [<c04b07c0>] (platform_drv_shutdown+0x14/0x18)
[69902.967013] c3 1 [<c04b07c0>] (platform_drv_shutdown+0x14/0x18) from [<c04ad390>] (device_shutdown+0xf0/0x138)
[69902.967029] c3 1 [<c04ad390>] (device_shutdown+0xf0/0x138) from [<c01b382c>] (kernel_restart_prepare+0x2c/0x3c)
[69902.967043] c3 1 [<c01b382c>] (kernel_restart_prepare+0x2c/0x3c) from [<c01b3880>] (kernel_restart+0x24/0x68)
[69902.967058] c3 1 [<c01b3880>] (kernel_restart+0x24/0x68) from [<c01b3b80>] (sys_reboot+0x1f4/0x268)
[69902.967074] c3 1 [<c01b3b80>] (sys_reboot+0x1f4/0x268) from [<c01064c0>] (ret_fast_syscall+0x0/0x30)
[69902.968715] c3 26078 msm_vidc: 4: Opening video instance: eaf84000, 1
[69902.970381] c3 26078 ------------[ cut here ]------------
[69902.970396] c3 26078 WARNING: at ../../../../../../kernel/htc/msm8974/drivers/base/firmware_class.c:684 __request_firmware+0x40/0xd8()
[69902.970416] c3 26078 [<c010c19c>] (unwind_backtrace+0x0/0x11c) from [<c01a0894>] (warn_slowpath_common+0x48/0x60)
[69902.970432] c3 26078 [<c01a0894>] (warn_slowpath_common+0x48/0x60) from [<c01a0964>] (warn_slowpath_null+0x18/0x1c)
[69902.970447] c3 26078 [<c01a0964>] (warn_slowpath_null+0x18/0x1c) from [<c04bc064>] (__request_firmware+0x40/0xd8)
[69902.970461] c3 26078 [<c04bc064>] (__request_firmware+0x40/0xd8) from [<c04bc10c>] (request_firmware+0x10/0x14)
[69902.970480] c3 26078 [<c04bc10c>] (request_firmware+0x10/0x14) from [<c012fc88>] (pil_boot+0x50/0xa74)
[69902.970495] c3 26078 [<c012fc88>] (pil_boot+0x50/0xa74) from [<c015a270>] (subsystem_get+0x7c/0x110)
[69902.970513] c3 26078 [<c015a270>] (subsystem_get+0x7c/0x110) from [<c061c6a8>] (venus_hfi_load_fw+0x170/0x748)
[69902.970531] c3 26078 [<c061c6a8>] (venus_hfi_load_fw+0x170/0x748) from [<c05ff8f0>] (msm_comm_try_state+0x32c/0x1814)
[69902.970546] c3 26078 [<c05ff8f0>] (msm_comm_try_state+0x32c/0x1814) from [<c0605b10>] (msm_vidc_open+0x43c/0x5b0)
[69902.970561] c3 26078 [<c0605b10>] (msm_vidc_open+0x43c/0x5b0) from [<c05f87dc>] (msm_v4l2_open+0x30/0xd4)
[69902.970579] c3 26078 [<c05f87dc>] (msm_v4l2_open+0x30/0xd4) from [<c06757cc>] (v4l2_open+0xa8/0xe4)
[69902.970595] c3 26078 [<c06757cc>] (v4l2_open+0xa8/0xe4) from [<c025fa44>] (chrdev_open+0x104/0x12c)
[69902.970611] c3 26078 [<c025fa44>] (chrdev_open+0x104/0x12c) from [<c0259c40>] (__dentry_open+0x1b4/0x29c)
[69902.970626] c3 26078 [<c0259c40>] (__dentry_open+0x1b4/0x29c) from [<c025aa5c>] (nameidata_to_filp+0x50/0x5c)
[69902.970642] c3 26078 [<c025aa5c>] (nameidata_to_filp+0x50/0x5c) from [<c0267c3c>] (do_last+0x7cc/0x800)
[69902.970656] c3 26078 [<c0267c3c>] (do_last+0x7cc/0x800) from [<c0267f60>] (path_openat+0x2f0/0x388)
[69902.970670] c3 26078 [<c0267f60>] (path_openat+0x2f0/0x388) from [<c0268024>] (do_filp_open+0x2c/0x78)
[69902.970684] c3 26078 [<c0268024>] (do_filp_open+0x2c/0x78) from [<c025ade0>] (do_sys_open+0xdc/0x1d8)
[69902.970698] c3 26078 [<c025ade0>] (do_sys_open+0xdc/0x1d8) from [<c01064c0>] (ret_fast_syscall+0x0/0x30)
[69902.970708] c3 26078 ---[ end trace da227214a82491bb ]---
[69902.970717] c3 26078 pil_venus fdce0000.qcom,venus: firmware: venus.mdt will not be loaded
[69902.970727] c3 26078 pil_venus fdce0000.qcom,venus: venus: Failed to locate venus.mdt
[69902.984580] c0 1 mdss_fb_release_all: fb0 release=true (ref=0)
[69903.149622] c0 1 [DISP] mdss_dsi_panel_off:-
[69903.157365] c0 1 [DISP] htc_m8_panel_power_on: en=0
[69903.182333] c0 1 [DISP] htc_m8_panel_power_on: en=0 done
[69903.184358] c0 238 mdss_fb_release_all: try to close unopened fb 0! from surfaceflinger
[69903.184414] c0 238 mdss_fb_release_all: try to close unopened fb 0! from surfaceflinger
[69903.187598] c0 1 set_rt5506_regulator:set regulator to PWM mode
[69903.203486] c0 1 rt5506_shutdown: enable gpio 62
[69903.223560] c0 1 rt5506_shutdown: reset rt5501
[69903.223585] c0 1 rt5506_write_reg: write reg 0x0 val 0x4
[69903.224952] c0 1 rt5506_shutdown: disable gpio 62
[69903.224974] c0 1 set_rt5506_regulator:set regulator to AUTO mode
[69903.225343] c0 1 [USB] android_shutdown ret : 0
[69903.226026] c0 1 mmc0: sdhci_msm_shutdown enter
[69903.226042] c0 1 sdhci_msm_shutdown: Lock eMMC
[69903.226057] c0 1 mmc0: sdhci_msm_shutdown leave
[69903.226389] c0 1 Restarting system with command ''.
[69903.226442] c0 1 Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=qcom user_debug=31 ehci-hcd.park=3 zcache androidboot.emmc=true androidboot.serialno=FA44xxx ats=0 vmalloc=400m zygote_oneshot=on androidboot.rom_type=NORMAL androidboot.baseband=1.12.20.1211 androidboot.efuse_info=SL androidboot.mode=normal androidboot.bootloader=3.19.0.0000 kernelflag=0x0 debugflag=0x0 androidboot.devicerev=4 pcbid.bid=3 abnrst=0 radioflag=0x0 radioflagex1=0x0 radioflagex2=0x0 androidboot.pagesize=2048 androidboot.cid=VZW__001 androidboot.mid=0P6B20000 androidboot.engid=0 imc_online_log=0 color_ID= acpu.footprint=(0x3) androidboot.dq=PASS androidboot.batt_poweron=good_battery kmemleak=off rpm_debug.enable=0 androidboot.carrier=Verizon androidboot.keycaps=qwerty androidboot.ddrmid=(0x3) androidboot.lb=1 uif= ro.op=0 td.sf=0 td.td=1 td.ofs=328 td.prd=1 td.dly=0 td.tmo=300 hlog.ofs=628 un.ofs=696 qf.st=1 androidboot.podt=0x7D0 mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_m8_sharp_novatek_35595_1080p_cmd dap=6
[69903.226590] c0 1 [K] Going down for restart now
[69903.226647] c0 1 msm_restart: Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=qcom user_debug=31 ehci-hcd.park=3 zcache androidboot.emmc=true androidboot.serialno=FA44xxx ats=0 vmalloc=400m zygote_oneshot=on androidboot.rom_type=NORMAL androidboot.baseband=1.12.20.1211 androidboot.efuse_info=SL androidboot.mode=normal androidboot.bootloader=3.19.0.0000 kernelflag=0x0 debugflag=0x0 androidboot.devicerev=4 pcbid.bid=3 abnrst=0 radioflag=0x0 radioflagex1=0x0 radioflagex2=0x0 androidboot.pagesize=2048 androidboot.cid=VZW__001 androidboot.mid=0P6B20000 androidboot.engid=0 imc_online_log=0 color_ID= acpu.footprint=(0x3) androidboot.dq=PASS androidboot.batt_poweron=good_battery kmemleak=off rpm_debug.enable=0 androidboot.carrier=Verizon androidboot.keycaps=qwerty androidboot.ddrmid=(0x3) androidboot.lb=1 uif= ro.op=0 td.sf=0 td.td=1 td.ofs=328 td.prd=1 td.dly=0 td.tmo=300 hlog.ofs=628 un.ofs=696 qf.st=1 androidboot.podt=0x7D0 mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_m8_sharp_novatek_35595_1080p_cmd dap=6
[69903.227390] c0 1 msm_restart_prepare: restart by command: []
[69903.227415] c0 1 set_restart_reason: set restart reason = 77665501
[69903.227432] c0 1 set_restart_msg: set restart msg = `'
[69903.227469] c0 1
[69903.227484] c0 1 [K] Restarting Linux version 3.4.0-g001341f ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Wed Nov 12 03:16:44 PST 2014
[69903.227497] c0 1
[69903.227695] c0 1 Calling SCM to disable SPMI PMIC arbiter
No errors detected

BSOD2600 said:
Had my M8 Since Nov 2014 and almost immediately installed CM. Been on CM11m12 for 6+ months and the phone has been fine. softkey area of screen started to die, so got a replacement M8 from VZW. Restored everything via nandroid and all seemed well.... until the phone now will randomly reboot -- even when I'm not using it and its just sitting on the desk. pulled logcat, etc and it appears something is causing it to shutdown, but I'm unable to determine exactly what.
Thoughts?
Code:
[69899.843696] c0 27034 wakeup sources: 'PowerManagerService.WakeLocks' 'PowerManagerService.Display' 'radio-interface' 'ges_wake_lock', time left 148 ticks;
[69900.771346] c3 263 pid:263(vold)(parent:1/init) (mmcblk1p1) umounted filesystem.
[69900.773494] c3 263 pid:263(vold)(parent:1/init) (fuse) umounted filesystem.
[69900.790603] c3 263 pid:263(vold)(parent:1/init) (mmcblk1p1) umounted filesystem.
[69900.814516] c3 1 init: untracked pid 1152 exited
[69901.558108] c2 26076 binder: 25885:26076 transaction failed 29189, size 184-0, brdr_fp 33
[69901.558296] c2 26076 binder: 25885:26076 transaction failed 29189, size 184-0, brdr_fp 33
[69901.558435] c2 26076 binder: 25885:26076 transaction failed 29189, size 184-0, brdr_fp 33
[69901.558520] c2 26076 binder: 25885:26076 transaction failed 29189, size 184-0, brdr_fp 33
[69901.558596] c2 26076 binder: 25885:26076 transaction failed 29189, size 184-0, brdr_fp 33
[69901.558674] c2 26076 binder: 25885:26076 transaction failed 29189, size 184-0, brdr_fp 33
[69901.744472] c3 1 init (1:1) triggered SysRq
[69901.744484] c3 1 SysRq : Emergency Remount R/O
[69901.747732] c3 26064 pid:26064(kworker/3:0)(parent:2/kthreadd) (mmcblk0p39) umounted filesystem.
[69901.747817] c3 26064 zcache: destroyed pool id=3, cli_id=65535
[69901.786145] c3 26064 pid:26064(kworker/3:0)(parent:2/kthreadd) (mmcblk0p27) umounted filesystem.
[69901.786233] c3 26064 zcache: destroyed pool id=4, cli_id=65535
[69901.846377] c3 26064 EXT4-fs (mmcblk0p49): re-mounted. Opts: (null)
[69901.894739] c3 26064 EXT4-fs (mmcblk0p48): re-mounted. Opts: (null)
[69901.896789] c3 26064 EXT4-fs (mmcblk0p22): re-mounted. Opts: (null)
[69901.896946] c3 26064 Emergency Remount complete
[69901.945742] c3 1 kernel_restart: system_dirty=1
[69901.945758] c3 1 notify_efs_sync_call: board_mfg_mode=0
[69901.945771] c3 1 [K] set_modem_efs_sync: wait for modem efs_sync
[69902.309964] c1 0 CPU1: msm_pm_power_collapse: change clock rate (old rate = 0)
[69902.596923] c3 26022 [LED]qpnp_led_set id: 1 value 0 status: 255
[69902.818060] c1 0 CPU1: msm_pm_power_collapse: change clock rate (old rate = 0)
[69902.871122] c2 0 CPU2: msm_pm_power_collapse: change clock rate (old rate = 0)
[69902.873906] c3 25630 msm_vidc: 4: Opening video instance: eaf83000, 0
[69902.886963] c3 25630 pil_venus fdce0000.qcom,venus: venus: loading from 0x0f500000 to 0x0fa00000
[69902.938865] c3 25630 pil_venus fdce0000.qcom,venus: venus: Brought out of reset
[69902.953430] c3 1 check_modem_efs_sync_timeout: modem efs_sync done.
[69902.953442] c3 1 [FLT]TPS reboot_notify_sys: 1
[69902.953449] c3 1 [FLT]TPS flashlight_turn_off
[69902.953851] c3 1 [FLT]TPS flashlight_turn_off 0
[69902.955103] c3 1 mdss_fb_release_all: try to close unopened fb 2! from init
[69902.955118] c3 1 mdss_fb_release_all: try to close unopened fb 1! from init
[69902.964096] c3 26078 msm_vidc: 4: Closed video instance: eaf83000
[69902.966931] c3 1 mdss_fb_release_all: remove process init from tracking, pid=1 mfd->ref_cnt=0
[69902.966943] c3 1 mdss_fb_release_all: unknown process init pid=1 mfd->ref=0
[69902.966967] c3 1 [<c010c19c>] (unwind_backtrace+0x0/0x11c) from [<c041b3c4>] (mdss_fb_release_all+0x368/0x4a0)
[69902.966982] c3 1 [<c041b3c4>] (mdss_fb_release_all+0x368/0x4a0) from [<c041b528>] (mdss_fb_shutdown+0x2c/0x3c)
[69902.966997] c3 1 [<c041b528>] (mdss_fb_shutdown+0x2c/0x3c) from [<c04b07c0>] (platform_drv_shutdown+0x14/0x18)
[69902.967013] c3 1 [<c04b07c0>] (platform_drv_shutdown+0x14/0x18) from [<c04ad390>] (device_shutdown+0xf0/0x138)
[69902.967029] c3 1 [<c04ad390>] (device_shutdown+0xf0/0x138) from [<c01b382c>] (kernel_restart_prepare+0x2c/0x3c)
[69902.967043] c3 1 [<c01b382c>] (kernel_restart_prepare+0x2c/0x3c) from [<c01b3880>] (kernel_restart+0x24/0x68)
[69902.967058] c3 1 [<c01b3880>] (kernel_restart+0x24/0x68) from [<c01b3b80>] (sys_reboot+0x1f4/0x268)
[69902.967074] c3 1 [<c01b3b80>] (sys_reboot+0x1f4/0x268) from [<c01064c0>] (ret_fast_syscall+0x0/0x30)
[69902.968715] c3 26078 msm_vidc: 4: Opening video instance: eaf84000, 1
[69902.970381] c3 26078 ------------[ cut here ]------------
[69902.970396] c3 26078 WARNING: at ../../../../../../kernel/htc/msm8974/drivers/base/firmware_class.c:684 __request_firmware+0x40/0xd8()
[69902.970416] c3 26078 [<c010c19c>] (unwind_backtrace+0x0/0x11c) from [<c01a0894>] (warn_slowpath_common+0x48/0x60)
[69902.970432] c3 26078 [<c01a0894>] (warn_slowpath_common+0x48/0x60) from [<c01a0964>] (warn_slowpath_null+0x18/0x1c)
[69902.970447] c3 26078 [<c01a0964>] (warn_slowpath_null+0x18/0x1c) from [<c04bc064>] (__request_firmware+0x40/0xd8)
[69902.970461] c3 26078 [<c04bc064>] (__request_firmware+0x40/0xd8) from [<c04bc10c>] (request_firmware+0x10/0x14)
[69902.970480] c3 26078 [<c04bc10c>] (request_firmware+0x10/0x14) from [<c012fc88>] (pil_boot+0x50/0xa74)
[69902.970495] c3 26078 [<c012fc88>] (pil_boot+0x50/0xa74) from [<c015a270>] (subsystem_get+0x7c/0x110)
[69902.970513] c3 26078 [<c015a270>] (subsystem_get+0x7c/0x110) from [<c061c6a8>] (venus_hfi_load_fw+0x170/0x748)
[69902.970531] c3 26078 [<c061c6a8>] (venus_hfi_load_fw+0x170/0x748) from [<c05ff8f0>] (msm_comm_try_state+0x32c/0x1814)
[69902.970546] c3 26078 [<c05ff8f0>] (msm_comm_try_state+0x32c/0x1814) from [<c0605b10>] (msm_vidc_open+0x43c/0x5b0)
[69902.970561] c3 26078 [<c0605b10>] (msm_vidc_open+0x43c/0x5b0) from [<c05f87dc>] (msm_v4l2_open+0x30/0xd4)
[69902.970579] c3 26078 [<c05f87dc>] (msm_v4l2_open+0x30/0xd4) from [<c06757cc>] (v4l2_open+0xa8/0xe4)
[69902.970595] c3 26078 [<c06757cc>] (v4l2_open+0xa8/0xe4) from [<c025fa44>] (chrdev_open+0x104/0x12c)
[69902.970611] c3 26078 [<c025fa44>] (chrdev_open+0x104/0x12c) from [<c0259c40>] (__dentry_open+0x1b4/0x29c)
[69902.970626] c3 26078 [<c0259c40>] (__dentry_open+0x1b4/0x29c) from [<c025aa5c>] (nameidata_to_filp+0x50/0x5c)
[69902.970642] c3 26078 [<c025aa5c>] (nameidata_to_filp+0x50/0x5c) from [<c0267c3c>] (do_last+0x7cc/0x800)
[69902.970656] c3 26078 [<c0267c3c>] (do_last+0x7cc/0x800) from [<c0267f60>] (path_openat+0x2f0/0x388)
[69902.970670] c3 26078 [<c0267f60>] (path_openat+0x2f0/0x388) from [<c0268024>] (do_filp_open+0x2c/0x78)
[69902.970684] c3 26078 [<c0268024>] (do_filp_open+0x2c/0x78) from [<c025ade0>] (do_sys_open+0xdc/0x1d8)
[69902.970698] c3 26078 [<c025ade0>] (do_sys_open+0xdc/0x1d8) from [<c01064c0>] (ret_fast_syscall+0x0/0x30)
[69902.970708] c3 26078 ---[ end trace da227214a82491bb ]---
[69902.970717] c3 26078 pil_venus fdce0000.qcom,venus: firmware: venus.mdt will not be loaded
[69902.970727] c3 26078 pil_venus fdce0000.qcom,venus: venus: Failed to locate venus.mdt
[69902.984580] c0 1 mdss_fb_release_all: fb0 release=true (ref=0)
[69903.149622] c0 1 [DISP] mdss_dsi_panel_off:-
[69903.157365] c0 1 [DISP] htc_m8_panel_power_on: en=0
[69903.182333] c0 1 [DISP] htc_m8_panel_power_on: en=0 done
[69903.184358] c0 238 mdss_fb_release_all: try to close unopened fb 0! from surfaceflinger
[69903.184414] c0 238 mdss_fb_release_all: try to close unopened fb 0! from surfaceflinger
[69903.187598] c0 1 set_rt5506_regulator:set regulator to PWM mode
[69903.203486] c0 1 rt5506_shutdown: enable gpio 62
[69903.223560] c0 1 rt5506_shutdown: reset rt5501
[69903.223585] c0 1 rt5506_write_reg: write reg 0x0 val 0x4
[69903.224952] c0 1 rt5506_shutdown: disable gpio 62
[69903.224974] c0 1 set_rt5506_regulator:set regulator to AUTO mode
[69903.225343] c0 1 [USB] android_shutdown ret : 0
[69903.226026] c0 1 mmc0: sdhci_msm_shutdown enter
[69903.226042] c0 1 sdhci_msm_shutdown: Lock eMMC
[69903.226057] c0 1 mmc0: sdhci_msm_shutdown leave
[69903.226389] c0 1 Restarting system with command ''.
[69903.226442] c0 1 Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=qcom user_debug=31 ehci-hcd.park=3 zcache androidboot.emmc=true androidboot.serialno=FA44xxx ats=0 vmalloc=400m zygote_oneshot=on androidboot.rom_type=NORMAL androidboot.baseband=1.12.20.1211 androidboot.efuse_info=SL androidboot.mode=normal androidboot.bootloader=3.19.0.0000 kernelflag=0x0 debugflag=0x0 androidboot.devicerev=4 pcbid.bid=3 abnrst=0 radioflag=0x0 radioflagex1=0x0 radioflagex2=0x0 androidboot.pagesize=2048 androidboot.cid=VZW__001 androidboot.mid=0P6B20000 androidboot.engid=0 imc_online_log=0 color_ID= acpu.footprint=(0x3) androidboot.dq=PASS androidboot.batt_poweron=good_battery kmemleak=off rpm_debug.enable=0 androidboot.carrier=Verizon androidboot.keycaps=qwerty androidboot.ddrmid=(0x3) androidboot.lb=1 uif= ro.op=0 td.sf=0 td.td=1 td.ofs=328 td.prd=1 td.dly=0 td.tmo=300 hlog.ofs=628 un.ofs=696 qf.st=1 androidboot.podt=0x7D0 mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_m8_sharp_novatek_35595_1080p_cmd dap=6
[69903.226590] c0 1 [K] Going down for restart now
[69903.226647] c0 1 msm_restart: Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=qcom user_debug=31 ehci-hcd.park=3 zcache androidboot.emmc=true androidboot.serialno=FA44xxx ats=0 vmalloc=400m zygote_oneshot=on androidboot.rom_type=NORMAL androidboot.baseband=1.12.20.1211 androidboot.efuse_info=SL androidboot.mode=normal androidboot.bootloader=3.19.0.0000 kernelflag=0x0 debugflag=0x0 androidboot.devicerev=4 pcbid.bid=3 abnrst=0 radioflag=0x0 radioflagex1=0x0 radioflagex2=0x0 androidboot.pagesize=2048 androidboot.cid=VZW__001 androidboot.mid=0P6B20000 androidboot.engid=0 imc_online_log=0 color_ID= acpu.footprint=(0x3) androidboot.dq=PASS androidboot.batt_poweron=good_battery kmemleak=off rpm_debug.enable=0 androidboot.carrier=Verizon androidboot.keycaps=qwerty androidboot.ddrmid=(0x3) androidboot.lb=1 uif= ro.op=0 td.sf=0 td.td=1 td.ofs=328 td.prd=1 td.dly=0 td.tmo=300 hlog.ofs=628 un.ofs=696 qf.st=1 androidboot.podt=0x7D0 mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_m8_sharp_novatek_35595_1080p_cmd dap=6
[69903.227390] c0 1 msm_restart_prepare: restart by command: []
[69903.227415] c0 1 set_restart_reason: set restart reason = 77665501
[69903.227432] c0 1 set_restart_msg: set restart msg = `'
[69903.227469] c0 1
[69903.227484] c0 1 [K] Restarting Linux version 3.4.0-g001341f ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Wed Nov 12 03:16:44 PST 2014
[69903.227497] c0 1
[69903.227695] c0 1 Calling SCM to disable SPMI PMIC arbiter
No errors detected
Click to expand...
Click to collapse
I would ruu back to stock and monitor. If problem persists it goes back.
Sent from my HTC6535LVW using Tapatalk

Wiped, did a fresh install of CM 12.1 (cm-12.1-20150813-NIGHTLY-m8), and transferred settings/apps via Titanium Backup a week ago. So far, no random reboots. occasionally phone does temporary freeze/lag though (google maps/chrome) like it didnt use to do... but maybe thats just a nightly issue. We'll see how long this lasts without issue...

Related

xoom wont turn on, frozen black screen

hi, last night i wanted to read something on my xoom before going to bed but i couldnt turn it on and i thought the battery run off, but today, after several hours of charging it, still cant turn it on......i tried the power+volume up, power+volume down, adb but since cant be recognized by the pc it's useless. does anyone have a solution?
it's a wifi+3g europe
rooted
z601 model
thanks!!!!!
I have the same problem. I was playing a game (GLWG) on my Xoom and when I exited the app my Xoom froze. I had about 80% battery life left and I tried both holding down Power and Volume UP and Holding down the power and volume down buttons. Nothing happened. I have scanned the internet for help and because when I plug the device into the computer it is not even recognized I don't even know where to begin. I am not in warranty so I can't just return it.
My Xoom is the WiFi only version
Please Help Thanks...
Being as the Xoom has only been out for about 9 months, you should both still be under the 1 year manufacturer's warranty. Give Motorola a call.
I completely forgot the manufacturer gave me a one year warranty thank you so much!
I have similar problem too. I have not touched my xoom for about a week. I charged it for several hours, and I couldn't turn on my xoom. I tried holding the power-on button for a long time, for repeated short time, with volume up, or, down, or both.
Anyone knows any solution before I go to Motorola store?
I got Xoom wifi+3G Stock ROM unrooted HK version (I think it's Honeycomb 3.1). Haven't even rooted, unlocked, or put any kind of custom room yet.
On December 22 I learned that what my Xoom need was a charge. After trying the Power button, and the various other ways to reboot, restart, or shutdown the device I gave up. After a few days (3) I tried to charge it and boom it started working. I don't know if during the time the Xoom completely drained of battery or what but I just waited and then tried to charge it and turn it on. I hope this helps anyone...
hey guys, i just got it repaired from moto, all good now, though i have to root it again
yappoe said:
I have similar problem too. I have not touched my xoom for about a week. I charged it for several hours, and I couldn't turn on my xoom. I tried holding the power-on button for a long time, for repeated short time, with volume up, or, down, or both.
Anyone knows any solution before I go to Motorola store?
I got Xoom wifi+3G Stock ROM unrooted HK version (I think it's Honeycomb 3.1). Haven't even rooted, unlocked, or put any kind of custom room yet.
Click to expand...
Click to collapse
Nope you're gonna have to send it in. I had the same problem where it just stopped working overnight and wouldn't turn on. The computer would recognize that it was plugged in and the charging light would come whenever I plugged it in since I had the tiamat rom on it. Sent it in and freaked out the entire time I waited cause I thought it could have been water damage. Motorola then sent it back with it fully fixed and the same screen, so i have no idea what the problem was. They sent it back with the stock rom and no root, though.
nooooooooooooooooooooooooooo i got the same problem a few days ago i use the volume + power and was able to turn in on today y was gonna do a wipe cache in recovery and the xoom never turn on not even with the volume + power
i dont wanna lose all my data
Each morning I am forced to Power vol-up to turn my Xoom on. There is something that is causing this.
Does anyone know how I can find the app or process that is causing this.
I am on CM10 nightlies.
Thanks
sstrool said:
Each morning I am forced to Power vol-up to turn my Xoom on. There is something that is causing this.
Does anyone know how I can find the app or process that is causing this.
I am on CM10 nightlies.
Thanks
Click to expand...
Click to collapse
Same problem here.
Can happen several times a day, or sometimes some days later.
Happens for CM10, CM10.1, EOS3 and EOS4.
If happened the Notification LED keeps blinking, but no sound on email received.
ADB Logcat does not work.
Would be awesome if anyone knows why or how to debug.
Hello again,
just pushing this post cause i still got huge problems.
Aprox. every day or second i need to power on the xoom cause it wont wake up from standby.
I currently do not know why and how this happens, it just does.
Is there any way of getting my xoom to write a logfile until it hangs up so that i can check this logfile for reasons?
Any suggestions!?
Greetings
Reseting your Xoom
sstrool said:
Each morning I am forced to Power vol-up to turn my Xoom on. There is something that is causing this.
Does anyone know how I can find the app or process that is causing this.
I am on CM10 nightlies.
Thanks
Click to expand...
Click to collapse
I had the same problem and I have a Xoom 32gb Wifi. I just factory reset. Hope that helps. You would have to reinstall and re root though. That worked for me. I had CM10.
Just had a hangup again.
Read out the last_kmsg file, maybe this could help to find some issues:
Code:
...REMOVED FIRST 1000000 LINES...
[74515.067690] mmc0: 32 bytes transferred: 0
[74515.067789] mmc0: starting CMD53 arg 21000100 flags 000001b5
[74515.067839] mmc0: blksz 256 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.067948] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
[74515.068011] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000002
[74515.068094] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.068136] mmc0: 256 bytes transferred: 0
[74515.068249] mmc0: starting CMD53 arg 21000020 flags 000001b5
[74515.068299] mmc0: blksz 32 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.068409] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.068490] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.068531] mmc0: 32 bytes transferred: 0
[74515.068682] mmc0: starting CMD52 arg 92001c00 flags 00000195
[74515.068756] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
[74515.068823] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000
[74515.069022] mmc0: starting CMD52 arg 92001c10 flags 00000195
[74515.069101] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
[74515.069174] mmc0: req done (CMD52): 0: 00001010 00000000 00000000 00000000
[74515.069273] mmc0: starting CMD52 arg 12001c00 flags 00000195
[74515.069341] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
[74515.069407] mmc0: req done (CMD52): 0: 00001010 00000000 00000000 00000000
[74515.069485] mmc0: starting CMD52 arg 12001c00 flags 00000195
[74515.069547] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
[74515.069611] mmc0: req done (CMD52): 0: 00001010 00000000 00000000 00000000
[74515.077394] mmc0: starting CMD52 arg 12001c00 flags 00000195
[74515.077464] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
[74515.077514] mmc0: req done (CMD52): 0: 000010d0 00000000 00000000 00000000
[74515.077601] mmc0: starting CMD53 arg a5000040 flags 000001b5
[74515.077637] mmc0: blksz 64 blocks 1 flags 00000100 tsac 1000 ms nsac 0
[74515.077735] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.077789] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.077819] mmc0: 64 bytes transferred: 0
[74515.077918] mmc0: starting CMD53 arg 15204004 flags 000001b5
[74515.077956] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.078039] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.078103] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.078132] mmc0: 4 bytes transferred: 0
[74515.078196] mmc0: starting CMD53 arg 95204004 flags 000001b5
[74515.078231] mmc0: blksz 4 blocks 1 flags 00000100 tsac 1000 ms nsac 0
[74515.078313] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.078366] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.078396] mmc0: 4 bytes transferred: 0
[74515.078463] mmc0: starting CMD53 arg 21000020 flags 000001b5
[74515.078500] mmc0: blksz 32 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.078576] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.078635] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.078664] mmc0: 32 bytes transferred: 0
[74515.078735] mmc0: starting CMD53 arg 21000020 flags 000001b5
[74515.078770] mmc0: blksz 32 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.078848] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.078905] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.078934] mmc0: 32 bytes transferred: 0
[74515.079015] mmc0: starting CMD53 arg 21000020 flags 000001b5
[74515.079050] mmc0: blksz 32 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.079127] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.079186] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.079216] mmc0: 32 bytes transferred: 0
[74515.079605] mmc0: starting CMD53 arg a50000a0 flags 000001b5
[74515.079643] mmc0: blksz 160 blocks 1 flags 00000100 tsac 1000 ms nsac 0
[74515.079733] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
[74515.079778] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000002
[74515.079828] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.079857] mmc0: 160 bytes transferred: 0
[74515.086492] mmc0: starting CMD52 arg 92001c00 flags 00000195
[74515.086561] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
[74515.086612] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000
[74515.365555] mmc0: starting CMD52 arg 92001c10 flags 00000195
[74515.365765] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
[74515.365846] mmc0: req done (CMD52): 0: 00001010 00000000 00000000 00000000
[74515.365969] mmc0: starting CMD52 arg 12001c00 flags 00000195
[74515.366178] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
[74515.366258] mmc0: req done (CMD52): 0: 000010d0 00000000 00000000 00000000
[74515.366405] mmc0: starting CMD53 arg 15204004 flags 000001b5
[74515.366469] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.366786] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.366885] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.366929] mmc0: 4 bytes transferred: 0
[74515.367037] mmc0: starting CMD53 arg 95204004 flags 000001b5
[74515.367089] mmc0: blksz 4 blocks 1 flags 00000100 tsac 1000 ms nsac 0
[74515.367328] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.367413] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.367457] mmc0: 4 bytes transferred: 0
[74515.367575] mmc0: starting CMD53 arg 21000020 flags 000001b5
[74515.367628] mmc0: blksz 32 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.367869] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.367965] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.368008] mmc0: 32 bytes transferred: 0
[74515.368127] mmc0: starting CMD53 arg 210000a0 flags 000001b5
[74515.368180] mmc0: blksz 160 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.368422] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.368519] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.368564] mmc0: 160 bytes transferred: 0
[74515.368767] mmc0: starting CMD52 arg 92001c00 flags 00000195
[74515.368970] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
[74515.369049] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000
[74515.369272] mmc0: starting CMD53 arg 21000020 flags 000001b5
[74515.369326] mmc0: blksz 32 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.369447] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.369539] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.369582] mmc0: 32 bytes transferred: 0
[74515.370252] mmc0: starting CMD52 arg 92001c10 flags 00000195
[74515.370337] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
[74515.370408] mmc0: req done (CMD52): 0: 00001010 00000000 00000000 00000000
[74515.370521] mmc0: starting CMD52 arg 12001c00 flags 00000195
[74515.370593] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
[74515.370661] mmc0: req done (CMD52): 0: 00001010 00000000 00000000 00000000
[74515.370744] mmc0: starting CMD52 arg 12001c00 flags 00000195
[74515.370809] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
[74515.370875] mmc0: req done (CMD52): 0: 00001010 00000000 00000000 00000000
[74515.376576] mmc0: starting CMD52 arg 12001c00 flags 00000195
[74515.376645] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
[74515.376712] mmc0: req done (CMD52): 0: 000010d0 00000000 00000000 00000000
[74515.376823] mmc0: starting CMD53 arg a50000e0 flags 000001b5
[74515.376873] mmc0: blksz 224 blocks 1 flags 00000100 tsac 1000 ms nsac 0
[74515.376989] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
[74515.377044] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000002
[74515.377111] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.377152] mmc0: 224 bytes transferred: 0
[74515.377296] mmc0: starting CMD53 arg 15204004 flags 000001b5
[74515.377349] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.377468] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.377557] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.377601] mmc0: 4 bytes transferred: 0
[74515.377694] mmc0: starting CMD53 arg 95204004 flags 000001b5
[74515.377746] mmc0: blksz 4 blocks 1 flags 00000100 tsac 1000 ms nsac 0
[74515.377860] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.377933] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.377975] mmc0: 4 bytes transferred: 0
[74515.378073] mmc0: starting CMD53 arg 21000020 flags 000001b5
[74515.378125] mmc0: blksz 32 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.378233] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.378315] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.378356] mmc0: 32 bytes transferred: 0
[74515.378456] mmc0: starting CMD53 arg 210000c0 flags 000001b5
[74515.378507] mmc0: blksz 192 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.378616] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
[74515.378678] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000002
[74515.378758] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.378800] mmc0: 192 bytes transferred: 0
[74515.378920] mmc0: starting CMD53 arg 21000020 flags 000001b5
[74515.378970] mmc0: blksz 32 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.379080] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.379162] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.379204] mmc0: 32 bytes transferred: 0
[74515.379411] mmc0: starting CMD53 arg a5000140 flags 000001b5
[74515.379463] mmc0: blksz 320 blocks 1 flags 00000100 tsac 1000 ms nsac 0
[74515.379586] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
[74515.379649] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000002
[74515.379758] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.379801] mmc0: 320 bytes transferred: 0
[74515.379947] mmc0: starting CMD53 arg 15204004 flags 000001b5
[74515.379996] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.380111] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.380202] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.380244] mmc0: 4 bytes transferred: 0
[74515.380334] mmc0: starting CMD53 arg 95204004 flags 000001b5
[74515.380385] mmc0: blksz 4 blocks 1 flags 00000100 tsac 1000 ms nsac 0
[74515.380497] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.380570] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.380612] mmc0: 4 bytes transferred: 0
[74515.380709] mmc0: starting CMD53 arg 21000020 flags 000001b5
[74515.380758] mmc0: blksz 32 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.380864] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.380947] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.380989] mmc0: 32 bytes transferred: 0
[74515.381087] mmc0: starting CMD53 arg 21000100 flags 000001b5
[74515.381135] mmc0: blksz 256 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.381243] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
[74515.381307] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000002
[74515.381388] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.381430] mmc0: 256 bytes transferred: 0
[74515.381544] mmc0: starting CMD53 arg 21000020 flags 000001b5
[74515.381594] mmc0: blksz 32 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.381702] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.381783] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.381824] mmc0: 32 bytes transferred: 0
[74515.382023] mmc0: starting CMD53 arg a5000040 flags 000001b5
[74515.382072] mmc0: blksz 64 blocks 1 flags 00000100 tsac 1000 ms nsac 0
[74515.382186] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.382257] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.382298] mmc0: 64 bytes transferred: 0
[74515.382516] mmc0: starting CMD53 arg 15204004 flags 000001b5
[74515.382566] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.382678] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.382767] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.382810] mmc0: 4 bytes transferred: 0
[74515.382899] mmc0: starting CMD53 arg 95204004 flags 000001b5
[74515.382950] mmc0: blksz 4 blocks 1 flags 00000100 tsac 1000 ms nsac 0
[74515.383062] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.383136] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.383177] mmc0: 4 bytes transferred: 0
[74515.383273] mmc0: starting CMD53 arg 21000020 flags 000001b5
[74515.383322] mmc0: blksz 32 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.383429] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.383511] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.383553] mmc0: 32 bytes transferred: 0
[74515.383650] mmc0: starting CMD53 arg 21000020 flags 000001b5
[74515.383699] mmc0: blksz 32 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.383807] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.383888] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.383928] mmc0: 32 bytes transferred: 0
[74515.384042] mmc0: starting CMD53 arg 21000020 flags 000001b5
[74515.384091] mmc0: blksz 32 blocks 1 flags 00000200 tsac 1000 ms nsac 0
[74515.384199] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.384281] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.384321] mmc0: 32 bytes transferred: 0
[74515.384782] mmc0: starting CMD53 arg a50000a0 flags 000001b5
[74515.384835] mmc0: blksz 160 blocks 1 flags 00000100 tsac 1000 ms nsac 0
[74515.384957] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
[74515.385028] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000
[74515.385068] mmc0: 160 bytes transferred: 0
[74515.387363] mmc0: starting CMD52 arg 92001c00 flags 00000195
[74515.387418] sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
[74515.387468] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000
[76426.516983] whisper_notify: accy=USB
[76426.517527] cpcap-otg cpcap-otg: SUSPEND --> PERIPHERAL
[76426.634376] android_work: did not send uevent (0 0 (null))
[76426.780672] android_work: sent uevent USB_STATE=CONNECTED
[76426.836898] android_usb gadget: high speed config #1: android
[76426.837307] android_work: sent uevent USB_STATE=CONFIGURED
[76507.369255] Hard reset buttons pushed
The only thing i see is that it stops at 74515.387468 and than has a break until i tried to logcat it at 76426.516983
got it fixed
Hi all.
I got the same problem a day ago - black screen, and xoom did not want to turn on.
I think i got the solution - battery have to be disconnected and connected again.
I disassembled xoom using one of many manuals posted in internet, unplug battery and plug it back, and my xoom starts as usual now
Hope it may help some of you. It takes 10 min, and small screw drivers set (i used only two of them actually)
regards
sstrool said:
Each morning I am forced to Power vol-up to turn my Xoom on. There is something that is causing this.
Does anyone know how I can find the app or process that is causing this.
I am on CM10 nightlies.
Thanks
Click to expand...
Click to collapse
Elementa/x kernel was cousing these in my xoom and with brocked power button was a pain in a **** switched to eso - no more issues!
Same issue please help!
Hey there!!!
Even my xoom has the same issue!
Please help me , my pc makes a sound when i connect my xoom , that makes it clear that its not bricked!!!
Please reply! How can i fix this by myself?
i'm out of warranty!!!
samsung_saad said:
Hey there!!!
Even my xoom has the same issue!
Please help me , my pc makes a sound when i connect my xoom , that makes it clear that its not bricked!!!
Please reply! How can i fix this by myself?
i'm out of warranty!!!
Click to expand...
Click to collapse
BUMP, i have got exactly the same issue! The volume up technique does not work. I already had a team eos custom rom installed on it. My pc rocognises the xoom when plugged into the computer but that's it no life.
airrunner said:
BUMP, i have got exactly the same issue! The volume up technique does not work. I already had a team eos custom rom installed on it. My pc rocognises the xoom when plugged into the computer but that's it no life.
Click to expand...
Click to collapse
did you try pluging it to your tv via hdmi cable?
I have this BLACK SCREEN but on When connected via HDMI
SO after figuring out my black screen is something to do with the screen, I have figured this out by connecting to HDMI and the xoom opens up on my tv. I took it apart and made sure the LCD plug is still tight, even unlocked and relocked it back in. I made sure everything else is tight, but only thing I could tell was loose was the other side of the wires connected under the motherboard wasnt attached or taped down, Any suggestions on what could be loose, because I can use the touch screen on the black screen to unlock the tab when its on the tv and i can motion white its still black. Please let me know as this is my kids tab. thanks

[Q] GT-P5100 Wifi (Broadcom)

Could someone confirm for me which Broadcom chip is in the GT-P5100 Samsung G Tab 2 10.1?
I think it is the BCM4330 but need to be sure for building the Kernel.
patonar said:
Could someone confirm for me which Broadcom chip is in the GT-P5100 Samsung G Tab 2 10.1?
I think it is the BCM4330 but need to be sure for building the Kernel.
Click to expand...
Click to collapse
Any one have any ideas? Currently when i build the kernel from Samsung Open Source the WiFi doesn't work?
Try manually load the wifi driver and then check the error message:
Code:
# insmod /lib/modules/dhd.ko
# dmesg
patonar said:
Any one have any ideas? Currently when i build the kernel from Samsung Open Source the WiFi doesn't work?
Click to expand...
Click to collapse
It doesn't announce the chip type during boot. It does say that it's using the Broadcom Dongle Host Driver (dhd.ko).
Here's the dmesg output right after a boot:
<4>[ 41.208312] C0 [ Thread-106] alloc static buf at ee980000!
<4>[ 41.214172] C0 [ Thread-106] dhdsdio_probe : no mutex held. set lock
<4>[ 41.214385] C0 [ Thread-106] F1 signature read @0x18000000=0x16044330
<4>[ 41.243164] C0 [ Thread-106] DHD: dongle ram size is set to 294912(orig 294912)
<6>[ 41.251251] C0 [wl_event_handle] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xedd1ee2c
<4>[ 41.251281] C0 [ Thread-106] wl_create_event_handler thr:366 created
<4>[ 41.267120] C0 [ Thread-106] p2p0: P2P Interface Registered
<4>[ 41.272186] C0 [ Thread-106] dhd_attach thr:369 created
<4>[ 41.280029] C0 [ Thread-106] dhd_attach thr:36a created
<4>[ 41.287811] C0 [ Thread-106] dhd_attach thr:36b created
<4>[ 41.395568] C0 [ Thread-106] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
<4>[ 41.518981] C0 [ Thread-106] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
<4>[ 41.525604] C0 [ Thread-106] Firmware up: op_mode=5, Broadcom Dongle Host Driver mac=1c:90:ee
<4>[ 41.529266] C0 [ Thread-106] POWER_VAL = 1
<4>[ 41.539489] C0 [ Thread-106] Firmware version = wl0: Sep 12 2012 18:50:40 version 5.90.125.1209 JB (WFD)
<4>[ 41.539520] C0 [ Thread-106] dhd_net_attach: ifidx 0
<4>[ 41.549743] C0 [ Thread-106] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 1c:90:ee
<4>[ 41.549774] C0 [ Thread-106] dhdsdio_probe : the lock is released.
<4>[ 41.565521] C0 [ Thread-106]
<4>[ 41.565551] C0 [ Thread-106] Dongle Host Driver, version 1.28.11.12 (Add_Patch_1005)
<4>[ 41.565551] C0 [ Thread-106] Compiled in drivers/net/wireless/bcmdhd on Nov 29 2012 at 14:35:07
<4>[ 42.079406] C1 [ wpa_supplicant] dhd_open: Enter, net[edd1e000]
<4>[ 42.079437] C1 [ wpa_supplicant]
<4>[ 42.079437] C1 [ wpa_supplicant] Dongle Host Driver, version 1.28.11.12 (Add_Patch_1005)
<4>[ 42.079437] C1 [ wpa_supplicant] Compiled in drivers/net/wireless/bcmdhd on Nov 29 2012 at 14:35:07
<6>[ 42.083282] C1 [ wpa_supplicant] CFG80211-INFO2) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=1e:90:ee
<4>[ 44.223602] C0 [ wpa_supplicant] dhd_wl_ioctl: WLC_IOCTL: cmd: 23, ret = -17
<4>[ 44.300018] C0 [ wpa_supplicant] dhd_wl_ioctl: WLC_SET_VAR: escan, ret = -16
<6>[ 44.300048] C0 [ wpa_supplicant] CFG80211-INFO2) wl_run_escan : Escan set error (-16)
<6>[ 44.300079] C0 [ wpa_supplicant] CFG80211-INFO2) wl_run_escan : error (-16)
<6>[ 44.300079] C0 [ wpa_supplicant] CFG80211-INFO2) __wl_cfg80211_scan : Scan err = (-16), busy?-16
<6>[ 44.300109] C0 [ wpa_supplicant] CFG80211-INFO2) wl_cfg80211_scan : scan error (-16)
<4>[ 45.324462] C0 [ wpa_supplicant] dhd_wl_ioctl: WLC_SET_VAR: escan, ret = -16
<6>[ 45.324493] C0 [ wpa_supplicant] CFG80211-INFO2) wl_run_escan : Escan set error (-16)
<6>[ 45.324493] C0 [ wpa_supplicant] CFG80211-INFO2) wl_run_escan : error (-16)
<6>[ 45.324523] C0 [ wpa_supplicant] CFG80211-INFO2) __wl_cfg80211_scan : Scan err = (-16), busy?-16
<6>[ 45.324523] C0 [ wpa_supplicant] CFG80211-INFO2) wl_cfg80211_scan : scan error (-16)
<4>[ 45.349548] C0 [wl_event_handle] wl_bss_connect_done succeeded with 0c:31:c0
<4>[ 45.366058] C0 [wl_event_handle] wl_bss_connect_done succeeded with 0c:31:c0
<6>[ 45.366088] C0 [wl_event_handle] CFG80211-INFO2) wl_bss_connect_done : Connected event of connected device e=0 s=0, ignore it
<6>[ 45.416717] C1 [ wpa_supplicant] CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : wl_cfg80211_set_btcoex_dhcp: DHCP session starts
<6>[ 46.010528] C0 [ wpa_supplicant] CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : wl_cfg80211_set_btcoex_dhcp: DHCP is complete
<3>[ 47.232666] C0 [ init] init: sys_prop: permission denied uid:1003 name:boot.sfbootcomplete
<3>[ 47.234222] C0 [ init] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
Click to expand...
Click to collapse
My dmesg output, others message not related to wifi removed:
wifi_set_power = 1
<4>[ 1406.053222] C1 [ Thread-159] wifi_set_carddetect = 1
<6>[ 1406.199890] C0 [ kworker/u:0] mmc2: new high speed SDIO card at address 0001
<4>[ 1406.207122] C1 [ Thread-159] alloc static buf at ee940000!
<4>[ 1406.208099] C0 [ Thread-159] dhdsdio_probe : no mutex held. set lock
<4>[ 1406.208526] C0 [ Thread-159] F1 signature read @0x18000000=0x16044330
<4>[ 1406.220153] C0 [ Thread-159] DHD: dongle ram size is set to 294912(orig 294912)
<4>[ 1406.222290] C0 [ Thread-159] wl_create_event_handler thr:dfd created
<6>[ 1406.223876] C1 [wl_event_handle] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xed56962c
<4>[ 1406.232330] C1 [ Thread-159] p2p0: P2P Interface Registered
<4>[ 1406.235717] C1 [ Thread-159] dhd_attach thr:dfe created
<4>[ 1406.235839] C1 [ Thread-159] dhd_attach thr:dff created
<4>[ 1406.235961] C1 [ Thread-159] dhd_attach thr:e00 created
<4>[ 1406.283935] C0 [ Thread-159] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
<4>[ 1406.407928] C0 [ Thread-159] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
<4>[ 1406.414093] C0 [ Thread-159] Firmware up: op_mode=5, Broadcom Dongle Host Driver mac=50:84:55
<4>[ 1406.417572] C0 [ Thread-159] POWER_VAL = 1
<4>[ 1406.425750] C0 [ Thread-159] Firmware version = wl0: Nov 27 2012 22:17:33 version 5.99.8 (JB) (WFD) (CCX)
<4>[ 1406.425781] C0 [ Thread-159] dhd_net_attach: ifidx 0
<4>[ 1406.443572] C0 [ Thread-159] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 50:84:55
<4>[ 1406.443603] C0 [ Thread-159] dhdsdio_probe : the lock is released.
<4>[ 1406.444915] C0 [ Thread-159]
<4>[ 1406.444915] C0 [ Thread-159] Dongle Host Driver, version 1.28.11.12 (Add_Patch_1005)
<4>[ 1406.444915] C0 [ Thread-159] Compiled in drivers/net/wireless/bcmdhd on Jan 17 2013 at 22:22:11
<4>[ 1406.576934] C1 [ wpa_supplicant] dhd_open: Enter, net[ed56b800]
<4>[ 1406.576965] C1 [ wpa_supplicant]
<4>[ 1406.576965] C1 [ wpa_supplicant] Dongle Host Driver, version 1.28.11.12 (Add_Patch_1005)
<4>[ 1406.576965] C1 [ wpa_supplicant] Compiled in drivers/net/wireless/bcmdhd on Jan 17 2013 at 22:22:11
<6>[ 1406.587585] C0 [ wpa_supplicant] CFG80211-INFO2) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=52:84:55
<3>[ 1406.823181] C0 [ wpa_supplicant] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for ID as ID rev -1
<7>[ 1416.820709] C0 [ swapper] wlan0: no IPv6 routers present
<7>[ 1417.211791] C1 [ swapper] p2p0: no IPv6 routers present
dhd_wl_ioctl: WLC_IOCTL: cmd: 23, ret = -17
<6>[ 1421.942199] C1 [wl_event_handle] CFG80211-INFO2) wl_escan_handler : unexpected Escan Event 10 : abort
<4>[ 1422.309417] C1 [wl_event_handle] wl_bss_connect_done succeeded with b2:6b:cf
<6>[ 1422.316711] C1 [ wpa_supplicant] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>[ 1422.330352] C1 [wl_event_handle] wl_bss_connect_done succeeded with b2:6b:cf
<6>[ 1422.330383] C1 [wl_event_handle] CFG80211-INFO2) wl_bss_connect_done : Connected event of connected device e=0 s=0, ignore it
<6>[ 1422.377410] C1 [ wpa_supplicant] CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : wl_cfg80211_set_btcoex_dhcp: DHCP session starts
<6>[ 1425.287078] C0 [ wpa_supplicant] CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : wl_cfg80211_set_btcoex_dhcp: DHCP is complete
Click to expand...
Click to collapse

precompiled kernel modules (like exFAT)

Can someone please tell me what they did to get precompiled kernel modules such as the exFAT modules provided by Samsung to load and work properly on the Note 2 kernels built from source? I've pulled in the commit that ignores the version info and also made a few other config changes so that the modules can load properly. However, if the kernel I build is used with an exFAT SDcard, the system will reboot as soon as Android goes to mount the card. I've tried using the modules from the VZW Note 2 (which I have) as well as the modules from the N7100, and both have the same end result.
A few more specifics and a kernel log would help...
The commonly used patch is the 1-liner excluding the exFat modules from module version check, but you say you already have that. Then you must have done some modifications in the kernel itself (SLUB/FTRACE?) to conflict with what the modules were built with.
AndreiLux said:
A few more specifics and a kernel log would help...
The commonly used patch is the 1-liner excluding the exFat modules from module version check, but you say you already have that. Then you must have done some modifications in the kernel itself (SLUB/FTRACE?) to conflict with what the modules were built with.
Click to expand...
Click to collapse
I ran out of time to grab the logcat/dmesg today when I tried, I'll grab it after I get home from work. I added in FTRACE as the modules wouldn't load without them, which I found from trying to insmod them manually and looking at the resulting errors. I didn't change SLUB, which is what it had as default for VZW, and it is also the default for the config included in the source for the N7100. The source I'm building off of is here on Github and I'm using the arm-eabi-4.4.3 toolchain from JB AOSP to compile with, if those are any help.
FTRACE is something you should specifically leave disabled, I don't know why you actually enabled that. I'd also look into JRCU.
I disabled FTRACE and recompiled, and am back to the same point I was at earlier with the modules not loading. I also removed JRCU, but this is the same issue I had without FTRACE added. Not sure why you think JRCU is part of the problem. Below is the error that I get when trying to insmod the exfat_core.ko module.
Code:
[email protected]:/ # lsmod
lsmod
vpnclient 90997 0 - Live 0x00000000
[email protected]:/ # insmod /lib/modules/exfat_core.ko
insmod /lib/modules/exfat_core.ko
insmod: init_module '/lib/modules/exfat_core.ko' failed (No such file or directo
ry)
255|[email protected]:/ # dmesg | grep exfat
dmesg | grep exfat
<4>[ 337.999907] c3 exfat_core: Unknown symbol kmem_cache_alloc_trace (err 0)
<4>[ 337.999970] c3 exfat_core: Unknown symbol __gnu_mcount_nc (err 0)
[email protected]:/ #
So, I went back to what I have now with the modules at least loading. I formatted my card to exFAT and restarted to get a logcat and then pulled last_kmsg after. Here is logcat that was cleared shortly before inserting the exFAT SDcard
Code:
--------- beginning of /dev/log/system
V/AlarmManager( 2356): waitForAlarm result :2
V/AlarmManager( 2356): waitForAlarm result :8
V/AlarmManager( 2356): ClockReceiver onReceive() ACTION_TIME_TICK
W/AlarmManager( 2356): FACTORY_ON= 0
D/STATUSBAR-Clock( 2869): onReceive() - ACTION_TIME_TICK
D/STATUSBAR-Clock( 2869): onReceive() - ACTION_TIME_TICK
D/STATUSBAR-Clock( 2869): onReceive() - ACTION_TIME_TICK
D/STATUSBAR-Clock( 2869): onReceive() - ACTION_TIME_TICK
D/ClockWidget( 2356): refreshTime()
D/ClockWidget( 2356): TTS Message = It is 12 : 55 AM, Tuesday, February 19
D/dalvikvm( 6451): GC_CONCURRENT freed 510K, 6% free 11894K/12551K, paused 1ms+2ms, total 13ms
I/VPNCStarter( 1975): Message channel file directory does not exist
V/AlarmManager( 2356): waitForAlarm result :4
V/AlarmManager( 2356): trigger ELAPSED_REALTIME_WAKEUP or RTC_WAKEUP
V/AlarmManager( 2356): waitForAlarm result :4
V/AlarmManager( 2356): trigger ELAPSED_REALTIME_WAKEUP or RTC_WAKEUP
D/WifiP2pService( 2356): P2pDisabledState{ what=131204 }
W/AlarmManager( 2356): FACTORY_ON= 0
W/AlarmManager( 2356): FACTORY_ON= 0
D/WifiP2pService( 2356): P2pDisabledState{ what=131204 }
D/DirectVolume( 1946): DirectVolume::readId -> path '/sys/devices/platform/s3c-sdhci.2/mmc_host/mmc1/mmc1:aaaa/block/mmcblk1/device/cid'
D/DirectVolume( 1946): DirectVolume::readId -> id '0353445355333247801d67339300cc00'
D/DirectVolume( 1946): DirectVolume::handleDiskAdded -> mDiskMajor 179, mDiskMinor 16, NPARTS:1
D/Vold ( 1946): Volume sdcard state changing 0 (No-Media) -> 2 (Pending)
D/DirectVolume( 1946): DirectVolume::handlePartitionAdded -> major 179, minor 17, PARTN 1
D/Vold ( 1946): Volume sdcard state changing 2 (Pending) -> 1 (Idle-Unmounted)
I/MountService( 2356): onEvent:: raw= 605 Volume sdcard /storage/extSdCard state changed from 0 (No-Media) to 2 (Pending) cooked = 605 Volume sdcard /storage/extSdCard state changed from 0 (No-Media) to 2 (Pending)
I/MountService( 2356): notifyVolumeStateChanged:: path = /storage/extSdCard,old= removed,new = removed
I/MountService( 2356): onEvent:: raw= 630 Volume sdcard /storage/extSdCard diskinserted (179:16) cooked = 630 Volume sdcard /storage/extSdCard disk inserted (179:16)
W/MountService( 2356): '/storage/extSdCard' waiting over pending state
I/MountService( 2356): onEvent:: raw= 605 Volume sdcard /storage/extSdCard state changed from 2 (Pending) to 1 (Idle-Unmounted) cooked = 605 Volume sdcard /storage/extSdCard state changed from 2 (Pending) to 1 (Idle-Unmounted)
I/MountService( 2356): updating volume state for media bad removal nofs and unmountable
D/MountService( 2356): updatePublicVolumeState :: path = /storage/extSdCard, state = unmounted
I/MemorySettings( 2955): Received storage state changed notification that /storage/extSdCard changed state from removed to unmounted
D/MountService( 2356): volume state changed for /storage/extSdCard (removed -> unmounted)
D/MtpService( 3242): onStorageStateChanged /storage/extSdCard removed -> unmounted
I/MountService( 2356): notifyVolumeStateChanged:: path = /storage/extSdCard,old= removed,new = unmounted
D/MountService( 2356): sendStorageIntent Intent { act=android.intent.action.MEDIA_UNMOUNTED dat=file:///storage/extSdCard (has extras) }
I/StorageNotification( 2869): Media {/storage/extSdCard} state changed from {removed} -> {unmounted}
D/MountService( 2356): :::: isUsbMassStorageEnabled :: ret = false
D/StorageNotification( 2869): setMediaStorageNotification : cancel id = -535891041, path = /storage/extSdCard
D/STATUSBAR-NotificationService( 2356): updateLightsLocked() : Set custom flashing notification light
D/LightsService( 2356): [SvcLED] setSvcLedStateLocked:: id = 4, color = -56832,mode = 1, set = On
W/AlarmManager( 2356): FACTORY_ON= 0
V/AlarmManager( 2356): waitForAlarm result :4
D/LightsService( 2356): [SvcLED] SvcLEDTask
E/MTPRx ( 8628): In MtpReceiverandroid.intent.action.MEDIA_UNMOUNTED
W/MTPRx ( 8628): MMC is disconnected
W/MTPRx ( 8628): Top screen is MTP
W/MTPRx ( 8628): sending MMC disconnected noti to stack
E/MTPJNIInterface( 8628): noti = 5
V/AlarmManager( 2356): trigger ELAPSED_REALTIME_WAKEUP or RTC_WAKEUP
D/SensorService( 2356): info.rates.add, set DEFAULT_EVENTS_PERIOD
E/Sensors ( 2356): Light old sensor_state 0, new sensor_state : 64 en : 1
D/SensorService( 2356): SensorDevice::activate (enable 1, disable 0) = 1
D/SensorService( 2356): activating sensor enable handle=6
D/SensorService( 2356): activating sensor enable, Done!
D/SensorService( 2356): SensorDevice::activating sensor handle=6 ns=200000000
D/LightsService( 2356): [SvcLED] SvcLEDReceiver::isHappyNight = true
I/SensorService( 2356): info.selectDelay() ns=200000000
D/SensorService( 2356): SensorDevice::setDelay, Return(true 1, false 0) = 1
D/SensorManager( 2356): registerListener :: handle = 6 name= CM36651 Light Sensor delay= 200000 Listener= [email protected]
D/SensorManager( 2356): unregisterListener:: Listener= [email protected]
E/Sensors ( 2356): Light old sensor_state 64, new sensor_state : 0 en : 0
D/LightsService( 2356): [SvcLED] onSensorChanged::light value = 0.0
D/SensorService( 2356): SensorDevice::activate (enable 1, disable 0) = 0
D/SensorService( 2356): activating sensor disable handle=6
D/SensorService( 2356): activating sensor disable, Done!
D/SensorService( 2356): SensorDevice::activating sensor handle=6 ns=200000000
D/lights ( 2356): write pattern : g_led_info = 4
I/LightsService( 2356): fileWriteInt : /sys/class/sec/led/led_lowpower value :1
D/lights ( 2356): write : /sys/class/sec/led/led_blink = 0xffff2200 1 0
D/lights ( 2356):
E/lights ( 2356): g_led_info = 0x4
D/LightsService( 2356): setLightLocked is called
D/MountService( 2356): doMountVolume :: Mouting path = /storage/extSdCard with = mounting
D/MountService( 2356): externalstorage_lock_state =
I/MountService( 2356): doMountVolume: Mouting /storage/extSdCard
D/VoldCmdListener( 1946): volume mount /storage/extSdCard
I/Vold ( 1946): /dev/block/vold/179:17 being considered for volume sdcard
D/Vold ( 1946): Volume sdcard state changing 1 (Idle-Unmounted) -> 3 (Checking)
I/MountService( 2356): onEvent:: raw= 605 Volume sdcard /storage/extSdCard state changed from 1 (Idle-Unmounted) to 3 (Checking) cooked = 605 Volume sdcard /storage/extSdCard state changed from 1 (Idle-Unmounted) to 3 (Checking)
I/MountService( 2356): updating volume state checking
D/MountService( 2356): updatePublicVolumeState :: path = /storage/extSdCard, state = checking
D/MountService( 2356): volume state changed for /storage/extSdCard (unmounted -> checking)
I/MemorySettings( 2955): Received storage state changed notification that /storage/extSdCard changed state from unmounted to checking
D/MtpService( 3242): onStorageStateChanged /storage/extSdCard unmounted -> checking
D/Vold ( 1946): Detected exFAT file system.
I/StorageNotification( 2869): Media {/storage/extSdCard} state changed from {unmounted} -> {checking}
D/ApplicationPolicy( 2356): isStatusBarNotificationAllowed: packageName = com.android.systemui
D/ApplicationPolicy( 2356): isStatusBarNotificationAllowed: packageName = com.android.systemui
D/ClockWidget( 2356): received MISSED_EVENT intent !!
I/MountService( 2356): notifyVolumeStateChanged:: path = /storage/extSdCard,old= unmounted,new = checking
D/MountService( 2356): sendStorageIntent Intent { act=android.intent.action.MEDIA_CHECKING dat=file:///storage/extSdCard (has extras) }
D/StorageNotification( 2869): setMediaStorageNotification : notify id = -535891041, path = /storage/extSdCard, title = Preparing SD cardD/PhoneStatusBar( 2869): addNotification score=0
D/STATUSBAR-NotificationService( 2356): Noti Alert - mSystemReady:true, AlertEnabled:true
E/NotificationService( 2356): Ignoring notification with icon==0: Notification(pri=0 contentView=null vibrate=null sound=null defaults=0x0 flags=0x8 kind=[null]) tickerText=null contactCharSeq=null when=1361253308173 threadId=0
D/STATUSBAR-NotificationService( 2356): Noti Alert - mSystemReady:true, AlertEnabled:true
W/ResourceType( 2869): Attempt to retrieve bag 0x01030068 which is invalid or in a cycle.
W/ResourceType( 2869): Attempt to retrieve bag 0x01030067 which is invalid or in a cycle.
I//system/bin/fsck.exfat( 1946): fsck.exfat 1.1.0p2
I//system/bin/fsck.exfat( 1946): No errors
I/Vold ( 1946): exfat -> Filesystem check completed OK
E/Vold ( 1946): MDM :: sdCardWriteAccessBlocked 0
D/Vold ( 1946): Detected exFAT file system.
And here is last_kmsg which I pulled after the phone rebooted. Full output here below is clipped to fit within the character limit.
Code:
<7>[ 299.052897] c0 led_lowpower mode set to 1
<7>[ 299.059799] c0 led_blink is called, Color:0xFFFF2200 Brightness:40
<1>[ 299.604562] c3 Unable to handle kernel paging request at virtual address 0000c354
<1>[ 299.604601] c3 pgd = eb4e8000
<1>[ 299.604619] c3 [0000c354] *pgd=00000000
<0>[ 299.604645] c3 Internal error: Oops: 5 [#1] PREEMPT SMP
<4>[ 299.604674] c3 Modules linked in: vpnclient exfat_fs(P) exfat_core(P)
<4>[ 299.604717] c3 CPU: 3 Tainted: P (3.0.31-00080-g060e141-dirty #1)
<4>[ 299.604761] c3 PC is at exfat_fill_super+0x88/0x57c [exfat_fs]
<4>[ 299.604798] c3 LR is at __get_free_pages+0x30/0x38
<4>[ 299.604826] c3 pc : [<bf0170e0>] lr : [<c010cf3c>] psr: a0000013
<4>[ 299.604856] c3 sp : ea7eddb8 ip : 000040ee fp : ea7ede44
<4>[ 299.604885] c3 r10: d8131000 r9 : e75313c0 r8 : e8d5a000
<4>[ 299.604915] c3 r7 : ea823070 r6 : d8131000 r5 : e8d5a000 r4 : d8da8000
<4>[ 299.604949] c3 r3 : ea7ec000 r2 : 0000c350 r1 : 000040d8 r0 : 000040ed
<4>[ 299.604985] c3 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
<4>[ 299.605024] c3 Control: 10c5387d Table: 6b4e804a DAC: 00000015
<4>[ 299.605057] c3
<4>[ 299.605068] c3 LR: 0xc010cebc:
<4>[ 299.605086] c3 cebc e1a06001 e3e05000 e1a045a4 e1b040a4 e2855001 1afffffc e1a00002 e1a01005
<4>[ 299.605145] c3 cedc e59f2024 e1a03004 ebfffde0 e3500000 01a00004 089da8f0 ebffb38a e1a01005
<4>[ 299.605202] c3 cefc e1a02006 ebfffb4a e89da8f0 c0a8f0c0 e1a0c00d e92dd800 e24cb004 e92d4000
<4>[ 299.605258] c3 cf1c ebfcce75 e3a03000 e59f2014 ebfffdcf e2503000 01a00003 089da800 ebffb379
<4>[ 299.605315] c3 cf3c e89da800 c0a8f0c0 e1a0c00d e92dd830 e24cb004 e92d4000 ebfcce67 e2403001
<4>[ 299.605372] c3 cf5c e1a05000 e3e04000 e1a035a3 e1b030a3 e2844001 1afffffc e1a00001 e1a01004
<4>[ 299.605428] c3 cf7c ebffffe2 e1a01004 e1a02005 ebfffb28 e89da830 e1a0c00d e92dd800 e24cb004
<4>[ 299.605485] c3 cf9c e92d4000 ebfcce54 e3a01000 e3800902 ebffffd6 e89da800 e1a0c00d e92ddbf0
<4>[ 299.605542] c3
<4>[ 299.605551] c3 SP: 0xea7edd38:
<4>[ 299.605569] c3 dd38 c23b3500 00000008 c0aa2e1c c23b3500 c00f9d38 c010cf3c ffffffff ea7edda4
<4>[ 299.605625] c3 dd58 d8131000 ea823070 ea7ede44 ea7edd70 c004016c c003a624 000040ed 000040d8
<4>[ 299.605682] c3 dd78 0000c350 ea7ec000 d8da8000 e8d5a000 d8131000 ea823070 e8d5a000 e75313c0
<4>[ 299.605739] c3 dd98 d8131000 ea7ede44 000040ee ea7eddb8 c010cf3c bf0170e0 a0000013 ffffffff
<4>[ 299.605795] c3 ddb8 ff0a0210 00000000 ea7ede0c ea7ede48 00000001 dba4d400 dba4d40c e8d5a000
<4>[ 299.605852] c3 ddd8 e75313c0 d8131000 ea7ede04 ea7eddf0 c021fdfc c021fa14 bf017d34 ea7ede0c
<4>[ 299.605908] c3 ddf8 ea823000 00001000 80000000 00000000 c014bbe0 c014bca0 00001000 d8131000
<4>[ 299.605965] c3 de18 00000080 ea823000 00000083 00000080 ea823070 e8d5a000 e75313c0 d8131000
<4>[ 299.606022] c3
<4>[ 299.606032] c3 FP: 0xea7eddc4:
<4>[ 299.606049] c3 ddc4 ea7ede48 00000001 dba4d400 dba4d40c e8d5a000 e75313c0 d8131000 ea7ede04
<4>[ 299.606106] c3 dde4 ea7eddf0 c021fdfc c021fa14 bf017d34 ea7ede0c ea823000 00001000 80000000
<4>[ 299.606162] c3 de04 00000000 c014bbe0 c014bca0 00001000 d8131000 00000080 ea823000 00000083
<4>[ 299.606218] c3 de24 00000080 ea823070 e8d5a000 e75313c0 d8131000 ea7ede8c ea7ede48 c011bcdc
<4>[ 299.606275] c3 de44 bf017064 62636d6d 70316b6c 00070031 c0135b14 ea7ede8c 00000003 00000002
<4>[ 299.606331] c3 de64 e7531800 da2bfe60 bf017d34 bf017d34 00000080 d8131000 d8131000 ea7edea4
<4>[ 299.606388] c3 de84 ea7ede90 bf017050 c011bbb4 bf017058 00000080 ea7edecc ea7edea8 c011a89c
<4>[ 299.606444] c3 dea4 bf017034 bf017d34 bf017d34 e7531800 da2bfe60 bf017d34 e7531800 ea7edef4
<4>[ 299.606501] c3
<4>[ 299.606511] c3 R3: 0xea7ebf80:
<4>[ 299.606528] c3 bf80 70ffd841 70ffdc41 70ff5841 70ff5c41 70ff9841 70ff9c41 70ff7841 70ff7c41
<4>[ 299.606585] c3 bfa0 70ff6841 70ff6c41 6b0e3811 6b0e3c11 6b0e4811 6b0e4c11 6b0e5811 6b0e5c11
<4>[ 299.606641] c3 bfc0 6b0e6811 6b0e6c11 6b0e7811 6b0e7c11 6b0e8811 6b0e8c11 6b0e9811 6b0e9c11
<4>[ 299.606698] c3 bfe0 6b0ec811 6b0ecc11 6b0ed811 6b0edc11 6b0ee811 6b0eec11 70ffe821 70ffec21
<4>[ 299.606754] c3 c000 00000000 00000002 00000000 eb617200 c09ff5b0 00000003 00000015 c30c0200
<4>[ 299.606811] c3 c020 eb617200 ea7ec000 c09dc4e8 e3ad55e0 ea823088 00000000 ea7edd0c ea7edcb8
<4>[ 299.606867] c3 c040 c05cb9a4 00000000 00000000 00000000 00000000 00000000 01010000 00000000
<4>[ 299.606923] c3 c060 4117cf00 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.606979] c3
<4>[ 299.606989] c3 R4: 0xd8da7f80:
<4>[ 299.607006] c3 7f80 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.607062] c3 7fa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.607118] c3 7fc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.607174] c3 7fe0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.607229] c3 8000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.607284] c3 8020 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.607340] c3 8040 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.607396] c3 8060 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.607452] c3
<4>[ 299.607461] c3 R5: 0xe8d59f80:
<4>[ 299.607479] c3 9f80 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.607535] c3 9fa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.607591] c3 9fc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.607646] c3 9fe0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.607702] c3 a000 c0a04c38 e95efe00 0b300011 00000c00 00001000 00000000 7fffffff 00000000
<4>[ 299.607759] c3 a020 bf017d34 bf0178cc 00000000 00000000 00000000 10000880 2011bab0 00000000
<4>[ 299.607815] c3 a040 ffffffff 00000000 00000000 e8d5a04c e8d5a04c 00000001 00000000 00000000
<4>[ 299.607871] c3 a060 e8d5a060 e8d5a060 00000000 00000001 00000001 00000000 e8d5a078 e8d5a078
<4>[ 299.607927] c3
<4>[ 299.607937] c3 R6: 0xd8130f80:
<4>[ 299.607954] c3 0f80 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.608010] c3 0fa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.608066] c3 0fc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.608122] c3 0fe0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 aa550000
<4>[ 299.608178] c3 1000 3d646975 30303031 6469672c 3230313d 6d662c33 3d6b7361 6d642c32 3d6b7361
<4>[ 299.608235] c3 1020 00000032 00000000 00000000 00000004 00000014 4117b340 00000001 00000001
<4>[ 299.608291] c3 1040 00000000 400398a1 400e9657 6f6d6e55 65746e75 4117b294 00000000 00000000
<4>[ 299.608347] c3 1060 6e696b63 00004000 40116b1e 00004000 00000035 ffff0208 40116b14 0000003f
<4>[ 299.608404] c3
<4>[ 299.608414] c3 R7: 0xea822ff0:
<4>[ 299.608431] c3 2ff0 ffffffff 00000000 ea822200 00000000 0b300011 00000001 ea823088 00000000
<4>[ 299.608487] c3 3010 00000001 00000000 00000000 ea82301c ea82301c 00000000 e3b64958 e3b64958
<4>[ 299.608543] c3 3030 00000000 bf017d34 00000001 00000000 ea823040 ea823040 ea823200 00001000
<4>[ 299.608600] c3 3050 da30ec00 00000000 00000000 dba4d400 eaa2e460 ea823260 00000000 00000000
<4>[ 299.608656] c3 3070 00000001 00000000 00000000 ea82307c ea82307c 00000000 00006000 00000000
<4>[ 299.608712] c3 3090 00000000 c0ad31c0 eb004800 00000000 00000000 00000000 00000000 00000001
<4>[ 299.608768] c3 30b0 00000000 00000000 ea8230b8 ea8230b8 00000000 ffffc2b4 00000000 c31a5cfc
<4>[ 299.608824] c3 30d0 ea8230d0 ea8230d0 ea8230d8 ea8230d8 eaa2e4e0 ea8232e0 ea8230e8 ea8230e8
<4>[ 299.608881] c3
<4>[ 299.608890] c3 R8: 0xe8d59f80:
<4>[ 299.608908] c3 9f80 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.608963] c3 9fa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.609019] c3 9fc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.609075] c3 9fe0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.609131] c3 a000 c0a04c38 e95efe00 0b300011 00000c00 00001000 00000000 7fffffff 00000000
<4>[ 299.609187] c3 a020 bf017d34 bf0178cc 00000000 00000000 00000000 10000880 2011bab0 00000000
<4>[ 299.609244] c3 a040 ffffffff 00000000 00000000 e8d5a04c e8d5a04c 00000001 00000000 00000000
<4>[ 299.609300] c3 a060 e8d5a060 e8d5a060 00000000 00000001 00000001 00000000 e8d5a078 e8d5a078
<4>[ 299.609357] c3
<4>[ 299.609366] c3 R9: 0xe7531340:
<4>[ 299.609384] c3 1340 e8525100 eb49eda8 eb49ed00 e7531a0c e753160c dba88000 00000000 00000000
<4>[ 299.609441] c3 1360 00000000 00200200 00000006 6eec9a80 00000000 00000000 00000000 00000000
<4>[ 299.609497] c3 1380 00000000 00000000 e93d4d38 e93d4d38 00000000 00000000 00000000 00000000
<4>[ 299.609553] c3 13a0 00000000 00000000 00000000 00000000 00000000 00000000 e8489ae4 c00a47dc
<4>[ 299.609609] c3 13c0 61667865 00000074 00100100 00200200 00000000 00000000 00000000 00000000
<4>[ 299.609665] c3 13e0 00000001 e79ccc80 00000006 5c1b8918 00000000 00000000 00000000 00000000
<4>[ 299.609721] c3 1400 e7531240 e7531220 eb6a7600 e7fe4314 e75315ac e7fe4300 00000000 00000000
<4>[ 299.609777] c3 1420 e7531260 00200200 c0aa9130 00100100 00200200 dba88d80 e79badd8 c00a47dc
<4>[ 299.609834] c3
<4>[ 299.609844] c3 R10: 0xd8130f80:
<4>[ 299.609862] c3 0f80 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.609917] c3 0fa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.609973] c3 0fc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 299.610028] c3 0fe0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 aa550000
<4>[ 299.610084] c3 1000 3d646975 30303031 6469672c 3230313d 6d662c33 3d6b7361 6d642c32 3d6b7361
<4>[ 299.610141] c3 1020 00000032 00000000 00000000 00000004 00000014 4117b340 00000001 00000001
<4>[ 299.610200] c3 1040 00000000 400398a1 400e9657 6f6d6e55 65746e75 4117b294 00000000 00000000
<4>[ 299.610258] c3 1060 6e696b63 00004000 40116b1e 00004000 00000035 ffff0208 40116b14 0000003f
<0>[ 299.610317] c3 Process vold (pid: 2239, stack limit = 0xea7ec2f0)
<0>[ 299.610352] c3 Stack: (0xea7eddb8 to 0xea7ee000)
<0>[ 299.610380] c3 dda0: ff0a0210 00000000
<0>[ 299.610428] c3 ddc0: ea7ede0c ea7ede48 00000001 dba4d400 dba4d40c e8d5a000 e75313c0 d8131000
<0>[ 299.610474] c3 dde0: ea7ede04 ea7eddf0 c021fdfc c021fa14 bf017d34 ea7ede0c ea823000 00001000
<0>[ 299.610522] c3 de00: 80000000 00000000 c014bbe0 c014bca0 00001000 d8131000 00000080 ea823000
<0>[ 299.610568] c3 de20: 00000083 00000080 ea823070 e8d5a000 e75313c0 d8131000 ea7ede8c ea7ede48
<0>[ 299.610613] c3 de40: c011bcdc bf017064 62636d6d 70316b6c 00070031 c0135b14 ea7ede8c 00000003
<0>[ 299.610663] c3 de60: 00000002 e7531800 da2bfe60 bf017d34 bf017d34 00000080 d8131000 d8131000
<0>[ 299.610708] c3 de80: ea7edea4 ea7ede90 bf017050 c011bbb4 bf017058 00000080 ea7edecc ea7edea8
<0>[ 299.610752] c3 dea0: c011a89c bf017034 bf017d34 bf017d34 e7531800 da2bfe60 bf017d34 e7531800
<0>[ 299.610797] c3 dec0: ea7edef4 ea7eded0 c01374f4 c011a884 bf017d34 e75313c0 d8131000 e7531800
<0>[ 299.610841] c3 dee0: 00000080 e75313c0 ea7edf1c ea7edef8 c0137598 c01374a0 00000000 0000001f
<0>[ 299.610886] c3 df00: 00000c8e 00000080 e7531800 e75313c0 ea7edf6c ea7edf20 c0137ce8 c0137560
<0>[ 299.610930] c3 df20: ea7edf7c ea7ec000 ea7edf44 ea7edf38 c010cf3c c00f9d30 eb00d0a0 ea909b28
<0>[ 299.610975] c3 df40: c013635c da64b000 4117b6d4 00000000 00000c8e c0040a08 ea7ec000 00000000
<0>[ 299.611019] c3 df60: ea7edfa4 ea7edf70 c0137e00 c0137638 d8131000 da2bf500 ea7edfa4 d8131000
<0>[ 299.611064] c3 df80: e7531800 e75313c0 4117b1cc 00000002 400e2789 00000015 00000000 ea7edfa8
<0>[ 299.611108] c3 dfa0: c0040800 c0137d78 4117b1cc 00000002 4117b6d4 4003c1b6 4117b15c 00000c8e
<0>[ 299.611152] c3 dfc0: 4117b1cc 00000002 400e2789 00000015 4117b1cc 4117b15c 00000c8e 000003e8
<0>[ 299.611197] c3 dfe0: 4117b138 4117b128 40032e69 400d9ff8 60000010 4117b6d4 00000000 00000000
<4>[ 299.611239] c3 Backtrace:
<4>[ 299.611269] c3 [<bf017058>] (exfat_fill_super+0x0/0x57c [exfat_fs]) from [<c011bcdc>] (mount_bdev+0x134/0x1b0)
<4>[ 299.611323] c3 [<c011bba8>] (mount_bdev+0x0/0x1b0) from [<bf017050>] (exfat_fs_mount+0x28/0x30 [exfat_fs])
<4>[ 299.611376] c3 [<bf017028>] (exfat_fs_mount+0x0/0x30 [exfat_fs]) from [<c011a89c>] (mount_fs+0x24/0xd0)
<4>[ 299.611430] c3 [<c011a878>] (mount_fs+0x0/0xd0) from [<c01374f4>] (vfs_kern_mount+0x60/0x98)
<4>[ 299.611471] c3 r6:e7531800 r5:bf017d34 r4:da2bfe60
<4>[ 299.611508] c3 [<c0137494>] (vfs_kern_mount+0x0/0x98) from [<c0137598>] (do_kern_mount+0x44/0xd8)
<4>[ 299.611551] c3 r9:e75313c0 r8:00000080 r7:e7531800 r6:d8131000 r5:e75313c0
<4>[ 299.611595] c3 r4:bf017d34
<4>[ 299.611619] c3 [<c0137554>] (do_kern_mount+0x0/0xd8) from [<c0137ce8>] (do_mount+0x6bc/0x740)
<4>[ 299.611660] c3 r9:e75313c0 r8:e7531800 r7:00000080 r6:00000c8e r5:0000001f
<4>[ 299.611703] c3 r4:00000000
<4>[ 299.611726] c3 [<c013762c>] (do_mount+0x0/0x740) from [<c0137e00>] (sys_mount+0x94/0xd4)
<4>[ 299.611775] c3 [<c0137d6c>] (sys_mount+0x0/0xd4) from [<c0040800>] (ret_fast_syscall+0x0/0x30)
<4>[ 299.611816] c3 r7:00000015 r6:400e2789 r5:00000002 r4:4117b1cc
<0>[ 299.611858] c3 Code: e5852038 e58541b4 e59122fc e30410d8 (e592e004)
<4>[ 299.611912] c3 ---[ end trace 946e1c34f4cb91f5 ]---
<0>[ 299.611963] c3 Kernel panic - not syncing: Fatal exception
<2>[ 299.612016] c0 CPU0: stopping
<4>[ 299.612035] c0 Backtrace:
<4>[ 299.612063] c0 [<c0044548>] (dump_backtrace+0x0/0x118) from [<c05cac9c>] (dump_stack+0x20/0x24)
<4>[ 299.612106] c0 r7:00000000 r6:c090bef8 r5:00000006 r4:00000000
<4>[ 299.612150] c0 [<c05cac7c>] (dump_stack+0x0/0x24) from [<c003a328>] (do_IPI+0x12c/0x254)
<4>[ 299.612196] c0 [<c003a1fc>] (do_IPI+0x0/0x254) from [<c0040200>] (__irq_svc+0x80/0x15c)
<4>[ 299.612236] c0 Exception stack(0xc090bef8 to 0xc090bf40)
<4>[ 299.612265] c0 bee0: 0006fbc0 00001f40
<4>[ 299.612310] c0 bf00: 00000000 000000f7 c30a70a8 c30a70b8 c0aa3ac4 c0aa2b9c c30a70a8 413fc090
<4>[ 299.612354] c0 bf20: 00000000 c090bf64 1b47651f c090bf40 c00a8054 c00525ec 20000013 ffffffff
<4>[ 299.612395] c0 r9:c090a000 r8:00000001 r7:00000002 r6:00000c06 r5:fe810000
<4>[ 299.612439] c0 r4:ffffffff
<4>[ 299.612468] c0 [<c0052460>] (exynos4_enter_idle+0x0/0x1c4) from [<c03d0a60>] (cpuidle_idle_call+0x14c/0x240)
<4>[ 299.612515] c0 r5:c30a70b8 r4:c30a70a8
<4>[ 299.612545] c0 [<c03d0914>] (cpuidle_idle_call+0x0/0x240) from [<c0041830>] (cpu_idle+0x94/0x110)
<4>[ 299.612593] c0 [<c004179c>] (cpu_idle+0x0/0x110) from [<c05bc7d4>] (rest_init+0xd0/0xe8)
<4>[ 299.612633] c0 r7:7fffffff r6:c003300c r5:00000000 r4:c090a000
<4>[ 299.612677] c0 [<c05bc704>] (rest_init+0x0/0xe8) from [<c00089bc>] (start_kernel+0x2b8/0x310)
<4>[ 299.612718] c0 r5:00000000 r4:c09dc568
<4>[ 299.612748] c0 [<c0008704>] (start_kernel+0x0/0x310) from [<40008040>] (0x40008040)
<6>[ 300.011796] c3 notifier_call_chain : NOTIFY BAD sec_debug_panic_handler
<0>[ 300.011832] c3 Rebooting in 1 seconds..
<0>[ 301.009341] c3 sec_reboot (104, emergency)
PMIC rev = PASS2(4)
mmc_initialize: mmc->capacity = 30777344
Samsung S-Boot 4.0-414933 for SCH-I605 (Oct 28 2012 - 13:33:33)
EXYNOS4412(EVT 2.0) / 2047MB / 15028MB / Rev 10 / I605VRALJB
initialize_ddi_data: usable! (0:0x0)
PARAM ENV VERSION: v1.0..
<start_checksum:331>CHECKSUM_HEADER_SECTOR :4096
<start_checksum:333>offset:50, size:6296
<start_checksum:336>CHECKSUM_HEADER_INFO : NeedChecksum:0 PartNo:20
Not Need Movinand Checksum
Movinand Checksum Confirmation Pass
init_fuelgauge: fuelgauge power ok
s5p_read_adc: ch#0: 641
s5p_read_adc: ch#0: 641
s5p_read_adc: ch#0: 639
init_fuelgauge: not POR status
init_fuelgauge: is reset case, skip soc-cal.
get_table_soc: vcell(3997) is caculated to t-soc(74.717)
init_fuelgauge: start: vcell(3997), vfocv(3991), soc(69), table soc(74)
init_fuelgauge: finish: vcell(3997), vfocv(3991), soc(69), table soc(74)
init_microusb_ic: MUIC: CONTROL1:0x00
init_microusb_ic: MUIC: CONTROL1:0x00
init_microusb_ic: MUIC: CONTROL2:0x3e
init_microusb_ic: MUIC: CONTROL2:0x3e
PMIC_ID = 0x02
PMIC_IRQSRC = 0x00
PMIC_STATUS1 = 0x16
PMIC_STATUS2 = 0x00
PMIC_PWRON = 0x01
PMIC_IRQ1 = 0x03
PMIC_IRQ2 = 0x00
s5p_check_keypad: 0x0
s5p_check_reboot_mode: INFORM3 = 0 ... skip
board_check_cp_mdm9x_type : 0
s5p_check_upload: MAGIC(0x66262564), RST_STAT(0x20000000)
s5p_check_upload: debug level is 4f4c!
s5p_check_upload: level low or unknown: skip 0
s5p_check_download: 0
s5p_check_modem_secure_fail: 0
microusb_get_attached_device: STATUS1:0x3f, 2:0x41
check_pm_status: normal reset, do not enter LPM mode.
ddi type = 1, S.LSI
cmu_div:6, div:2, src_clk:880000000, pixel_clk:62614944
41, 16, a2,
load_kernel: loading boot image from 106496..
pit_check_signature (BOOT) valid.
if_ddi_data: succeeded. (0:0x0)
ATAG_CORE: 5 54410001 0 0 0
ATAG_MEM: 4 54410002 20000000 40000000
ATAG_MEM: 4 54410002 20000000 60000000
ATAG_MEM: 4 54410002 20000000 80000000
ATAG_MEM: 4 54410002 1ff00000 a0000000
ATAG_SERIAL: 4 54410006 42f7bcee 3b6e9fa3
ATAG_INITRD2: 4 54420005 42000000 97f32
ATAG_REVISION: 3 54410007 a
ATAG_CMDLINE: 6f 54410009 'console=ram loglevel=4 androidboot.baseband=mdm sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c [email protected] s3cfb.bootloaderfb=0x5ec00000 lcdtype=1 consoleblank=0 lpcharge=0 lpj=3981312 vmalloc=176m oops=panic pmic_info=67 cordon=8d78aade5c699053ba8c8f30d3606e94 androidboot.emmc_checksum=3 androidboot.bootloader=I605VRALJB androidboot.serialno=42f7bcee3b6e9fa3 snd_soc_core.pmdown_time=1000'
ATAG_NONE: 0 0
Starting kernel at 0x40008000...
SWITCH_SEL(3)
exFAT is a gray area in terms of licensing, etc. Because of that, I've made some edits to the OP to keep XDA out of legal trouble.
Instead of asking to get the exFAT module working with a custom kernel, the post will ask how to "get precompiled modules like exFAT working" - etc.
Gary
I asked you if you did SLUB changes, your SLQB patch alters/adds #include <linux/rcu_types.h> regardless if it is enabled in the config or not. Try reverting all your patches related memory management and RCU. Also unlike you, I run FTRACE disabled throughout all the kernels, enabling it will crash the device when loading the module for me.
I reverted the RCU and SLQB commits, redid the config without FTRACE, and the modules aren't loading (still), and when I try to insmod them manually, I get the same error without the RCU/SLQB commits that I got with them.
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Mark>adb shell lsmod
vpnclient 90997 0 - Live 0x00000000
C:\Users\Mark>adb shell
[email protected]:/ # insmod /lib/modules/exfat_core.ko
insmod /lib/modules/exfat_core.ko
insmod: init_module '/lib/modules/exfat_core.ko' failed (No such file or directo
ry)
255|[email protected]:/ # dmesg | grep exfat
dmesg | grep exfat
<4>[ 62.231113] c1 exfat_core: Unknown symbol kmem_cache_alloc_trace (err 0)
<4>[ 62.231239] c1 exfat_core: Unknown symbol __gnu_mcount_nc (err 0)
[email protected]:/ #
C:\Users\Mark>
So, I went back, enabled FTRACE again with the RCU/SLQB commits out of the picture, and it cuts off at the same place on logcat as I posted above with JRCU/SLQB.
Then I don't know. Diff my, or other kernel's defconfig. I've also heard some dev say a toolchain upgrade made it not possible anymore to load the modules, but didn't get the specifics on that.

Stuck on CWM 6.0.1.3 recovery screen

Hi,
My TF700 is stuck on CWM 6.0.1.3 (non touch) recovery screen, it always goes there.
I was now able to use adb command (it shows serial no 0123456789ABCDE is it normal?).
Fastboot does not work
Can i do something to recover my TF700?
Thanks for your help.
Kalimeruh said:
Hi,
My TF700 is stuck on CWM 6.0.1.3 (non touch) recovery screen, it always goes there.
I was now able to use adb command (it shows serial no 0123456789ABCDE is it normal?).
Fastboot does not work
Can i do something to recover my TF700?
Thanks for your help.
Click to expand...
Click to collapse
What bootloader version do you have? (4.1.1 or 4.2.1)? can you boot into the OS?
buhohitr said:
What bootloader version do you have? (4.1.1 or 4.2.1)? can you boot into the OS?
Click to expand...
Click to collapse
I think it is 4.2.1. I only can get to the CWM recovery (directly).
Kalimeruh said:
I think it is 4.2.1. I only can get to the CWM recovery (directly).
Click to expand...
Click to collapse
Did you try to use CWM to reflash rom/kernel?
buhohitr said:
Did you try to use CWM to reflash rom/kernel?
Click to expand...
Click to collapse
The volume + and - do not work. I'm only able to select option reboot system now.
Is there something that i can do from adb? It is seems to be the only way i can communicate with the tablet.
Kalimeruh said:
The volume + and - do not work. I'm only able to select option reboot system now.
Is there something that i can do from adb? It is seems to be the only way i can communicate with the tablet.
Click to expand...
Click to collapse
I see, OK let do this:
1) Download full Asus firmware and unzip all the way until you see the "blob" file
2) Copy the blob file to your Micro sdcard using your PC then then insert the card back into your tablet
3) On your PC, execute the following adb commands:
adb shell hit enter(you are going to see bunch of weird characters, this's normal)
dd if=/Removable/MicroSD/blob of=/dev/block/mmcblk0p4 hit enter and wait for around 10-20min.
Update process will start and table will reboot once done. Remember you will have stock rom and recovery back once done.
buhohitr said:
I see, OK let do this:
1) Download full Asus firmware and unzip all the way until you see the "blob" file
2) Copy the blob file to your Micro sdcard using your PC then then insert the card back into your tablet
3) On your PC, execute the following adb commands:
adb shell hit enter(you are going to see bunch of weird characters, this's normal)
dd if=/Removable/MicroSD/blob of=/dev/block/mmcblk0p4 hit enter and wait for around 10-20min.
Update process will start and table will reboot once done. Remember you will have stock rom and recovery back once done.
Click to expand...
Click to collapse
Thanks for your reply
I got an error "/Removable/MicroSD/blob no such file or directory".
I'm trying now the abd push blob /sdcard/blob and then i'll do the rest on the command line afterwards.
Do you think it will work?
[Update] Didn't work
When the tablet is connected to the pc the screen is always showing "CWM 6.0.1.3", does that have any influence?
Thanks
I saw that i'm also able to use nvflash and wheelie.
The only command i cannot use is fastboot
Can somebody please help me?
Kalimeruh said:
I saw that i'm also able to use nvflash and wheelie.
The only command i cannot use is fastboot
Can somebody please help me?
Click to expand...
Click to collapse
If you post error messages instead of "doesn't work", maybe.
You said you cannot use fastboot - why?
You said you are able to use nvflash and wheelie, does that mean you also have the required files like "blob.bin", "bricksafe.img" etc.?
_that said:
If you post error messages instead of "doesn't work", maybe.
You said you cannot use fastboot - why?
You said you are able to use nvflash and wheelie, does that mean you also have the required files like "blob.bin", "bricksafe.img" etc.?
Click to expand...
Click to collapse
Basically because i don't have error messages.
I cannot use the fastboot because the tablet is stuck on the screen of the CWM i cannot got out. Either it is on recovery mode or on APX... When i use fastboot command cmd cannot find devices.
Regarding nvflash and wheelie is means that i am able to communicate with the tablet. I have one ebtblob.bin, i tried but i got one error ]Failed to read RCMVERS from blob file.
Can you give me a hint?
Thanks
Kalimeruh said:
I cannot use the fastboot because the tablet is stuck on the screen of the CWM i cannot got out. Either it is on recovery mode or on APX... When i use fastboot command cmd cannot find devices.
Click to expand...
Click to collapse
What happens when you try to enter the bootloader menu? (hold Volume-left while turning the tablet on)
Kalimeruh said:
Regarding nvflash and wheelie is means that i am able to communicate with the tablet. I have one ebtblob.bin, i tried but i got one error ]Failed to read RCMVERS from blob file.
Can you give me a hint?
Click to expand...
Click to collapse
So you don't have a blob for your device, which means you can't use nvflash.
Since you can communicate with the recovery via adb, please post the output of
Code:
adb shell ls -l /dev/block/mmc*
to see if your recovery can access the internal storage.
_that said:
What happens when you try to enter the bootloader menu? (hold Volume-left while turning the tablet on)
It goes directly to CWM 6.0.1.3 (non touch version) where i cannot do anything because volume up and down do not work.
So you don't have a blob for your device, which means you can't use nvflash.
Since you can communicate with the recovery via adb, please post the output of
Code:
adb shell ls -l /dev/block/mmc*
to see if your recovery can access the internal storage.
Click to expand...
Click to collapse
brw------- 1 root root 179, 0 Jan 19 15:52 /dev/block/mmcblk0
brw------- 1 root root 179, 1 Jan 19 15:52 /dev/block/mmcblk0p1
-rw-rw-rw- 1 root root 1088 Jan 19 15:52 /dev/block/mmcblk0p3
Kalimeruh said:
brw------- 1 root root 179, 0 Jan 19 15:52 /dev/block/mmcblk0
brw------- 1 root root 179, 1 Jan 19 15:52 /dev/block/mmcblk0p1
-rw-rw-rw- 1 root root 1088 Jan 19 15:52 /dev/block/mmcblk0p3
Click to expand...
Click to collapse
That's very bad - it should show at least mmcblk0p1 to mmcblk0p8. That means you can't use the recovery to modify anything on your internal storage.
How did you get into this situation? "Wipe data" in the bootloader menu?
_that said:
That's very bad - it should show at least mmcblk0p1 to mmcblk0p8. That means you can't use the recovery to modify anything on your internal storage.
How did you get into this situation? "Wipe data" in the bootloader menu?
Click to expand...
Click to collapse
This happened since i've installed CWM 6.0.1.3, i'm not able to do anything.
Is there any solution?
Kalimeruh said:
This happened since i've installed CWM 6.0.1.3, i'm not able to do anything.
Is there any solution?
Click to expand...
Click to collapse
If you can't get fastboot to work, I have no other idea.
_that said:
If you can't get fastboot to work, I have no other idea.
Click to expand...
Click to collapse
Will this http://forum.xda-developers.com/showthread.php?t=1994705 work for me?
Kalimeruh said:
Will this http://forum.xda-developers.com/showthread.php?t=1994705 work for me?
Click to expand...
Click to collapse
No, that requires a running Android system, or at least a recovery that can access your internal storage.
To get more info about your problem, reboot your tablet and run the following command on your computer:
Code:
adb shell dmesg > dmesg.txt
and post the resulting file.
Also try this:
Code:
adb shell hexdump -C -s 0x380000 -n 8 /dev/block/mmcblk0
and tell me if it outputs "ANDROID!" (after some hexadecimal numbers).
_that said:
No, that requires a running Android system, or at least a recovery that can access your internal storage.
To get more info about your problem, reboot your tablet and run the following command on your computer:
Code:
adb shell dmesg > dmesg.txt
and post the resulting file.
Click to expand...
Click to collapse
Here you are:
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 2.6.39.4-cyanogenmod-g80ca3c6 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Sep 14 10:04:19 MST 2012
<4>[ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387f
<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: cardhu
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801
<6>[ 0.000000] Found tegra_fbmem: [email protected]
<6>[ 0.000000] Tegra reserved memory:
<6>[ 0.000000] LP0: bddf9000 - bddfafff
<6>[ 0.000000] Bootloader framebuffer: abc01000 - ac4cbfff
<6>[ 0.000000] Framebuffer: bec00000 - bf4fffff
<6>[ 0.000000] 2nd Framebuffer: bf500000 - bfdfffff
<6>[ 0.000000] Carveout: 00000000 - 00000000
<6>[ 0.000000] Vpr: 00000000 - 00000000
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
<7>[ 0.000000] On node 0 totalpages: 256768
<7>[ 0.000000] free_area_init_node: node 0, pgdat c082d200, node_mem_map c0989000
<7>[ 0.000000] Normal zone: 1536 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 195072 pages, LIFO batch:31
<7>[ 0.000000] HighMem zone: 508 pages used for memmap
<7>[ 0.000000] HighMem zone: 59652 pages, LIFO batch:15
<6>[ 0.000000] Tegra3: CPU Speedo ID 5, CPU Process ID 3, Soc Speedo ID 2
<6>[ 0.000000] Tegra Revision: A03 SKU: 0x80 CPU Process: 3 Core Process: 0
<6>[ 0.000000] tegra: PLLP fixed rate: 408000000
<6>[ 0.000000] [MISC]: adopt kernel cmdline prior to tegra3_get_project_id ready.
<4>[ 0.000000] Lowering cpu_lp maximum rate from 620000000 to 513000000
<4>[ 0.000000] Lowering sbus maximum rate from 334000000 to 267000000
<4>[ 0.000000] Lowering vi maximum rate from 425000000 to 409000000
<4>[ 0.000000] Lowering vde maximum rate from 600000000 to 437000000
<4>[ 0.000000] Lowering mpe maximum rate from 600000000 to 446000000
<4>[ 0.000000] Lowering 2d maximum rate from 600000000 to 446000000
<4>[ 0.000000] Lowering epp maximum rate from 600000000 to 446000000
<4>[ 0.000000] Lowering 3d maximum rate from 600000000 to 446000000
<4>[ 0.000000] Lowering 3d2 maximum rate from 600000000 to 446000000
<4>[ 0.000000] Lowering se maximum rate from 600000000 to 446000000
<4>[ 0.000000] Lowering host1x maximum rate from 300000000 to 267000000
<4>[ 0.000000] Lowering cbus maximum rate from 700000000 to 437000000
<4>[ 0.000000] Lowering pll_c maximum rate from 1400000000 to 1066000000
<4>[ 0.000000] Lowering ndflash maximum rate from 240000000 to 200000000
<4>[ 0.000000] Lowering sbc1 maximum rate from 160000000 to 100000000
<4>[ 0.000000] Lowering sbc2 maximum rate from 160000000 to 100000000
<4>[ 0.000000] Lowering sbc3 maximum rate from 160000000 to 100000000
<4>[ 0.000000] Lowering sbc4 maximum rate from 160000000 to 100000000
<4>[ 0.000000] Lowering sbc5 maximum rate from 160000000 to 100000000
<4>[ 0.000000] Lowering sbc6 maximum rate from 160000000 to 100000000
<4>[ 0.000000] Lowering dsia maximum rate from 500000000 to 275000000
<4>[ 0.000000] Lowering dsib maximum rate from 500000000 to 275000000
<4>[ 0.000000] Lowering cpu_g maximum rate from 1900000000 to 1370000000
<4>[ 0.000000] Keep max_rate of cpu_g as 1900000000
<4>[ 0.000000] max_millivolts of cpu_g is d->max_millivolts =1275
<4>[ 0.000000] tegra3_dvfs: cold offset 50000000 is too high for regular dvfs limit 1000000
<4>[ 0.000000] tegra3_dvfs: cold offset 50000000 is too high for regular dvfs limit 1000000
<6>[ 0.000000] tegra dvfs: VDD_CPU nominal 1075mV, scaling enabled
<6>[ 0.000000] tegra dvfs: VDD_CORE nominal 1200mV, scaling enabled
<6>[ 0.000000] L310 cache controller enabled
<6>[ 0.000000] l2x0: 8 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7c080001, Cache size: 1048576 B
<6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @c1191000 s8992 r8192 d15584 u32768
<7>[ 0.000000] pcpu-alloc: s8992 r8192 d15584 u32768 alloc=8*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254724
<5>[ 0.000000] Kernel command line: tegraid=30.1.3.0.0 [email protected] commchip_id=0 androidboot.serialno=015d2d431f0c0208 androidboot.commchip_id=0 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 usbcore.old_scheme_first=1 [email protected] [email protected] core_edp_mv=0 audio_codec=wm8903 board_info=245:0:14:ed:28 tegraboot=sdmmc gpt gpt_sector=62078975 android.kerneltype=recovery androidboot.productid=0x04 androidboot.carrier=wifi-only
<6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Memory: 1003MB = 1003MB total
<5>[ 0.000000] Memory: 997352k/997352k available, 49176k reserved, 240632K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
<5>[ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .init : 0xc0008000 - 0xc0042000 ( 232 kB)
<5>[ 0.000000] .text : 0xc0042000 - 0xc075ce44 (7276 kB)
<5>[ 0.000000] .data : 0xc075e000 - 0xc082edc0 ( 836 kB)
<6>[ 0.000000] Preemptable hierarchical RCU implementation.
<6>[ 0.000000] RCU-based detection of stalled CPUs is disabled.
<6>[ 0.000000] Verbose stalled-CPUs detection is disabled.
<6>[ 0.000000] NR_IRQS:800
<6>[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
<6>[ 0.000202] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
<6>[ 0.040062] pid_max: default: 32768 minimum: 301
<6>[ 0.040237] Mount-cache hash table entries: 512
<6>[ 0.040960] Initializing cgroup subsys debug
<6>[ 0.040972] Initializing cgroup subsys cpuacct
<6>[ 0.041033] Initializing cgroup subsys freezer
<6>[ 0.041060] CPU: Testing write buffer coherency: ok
<6>[ 0.041304] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<4>[ 0.161490] CPU1: Booted secondary processor
<4>[ 0.221464] CPU2: Booted secondary processor
<4>[ 0.281459] CPU3: Booted secondary processor
<6>[ 0.301280] Brought up 4 CPUs
<6>[ 0.301291] SMP: Total of 4 processors activated (3984.58 BogoMIPS).
<6>[ 0.304893] print_constraints: dummy:
<6>[ 0.305082] NET: Registered protocol family 16
<6>[ 0.305853] host1x bus init
<6>[ 0.306779] [MISC]: adopt kernel cmdline prior to tegra3_get_project_id ready.
<6>[ 0.306788] [MISC]: adopt kernel cmdline prior to tegra3_get_project_id ready.
<4>[ 0.307991] Check TF700T pinmux
<4>[ 0.308115] tegra_booting_info reg=0
<4>[ 0.308121] tegra_booting_info-normal
<6>[ 0.308489] cardhu_edp_init : use asus edp policy
<6>[ 0.308534] Selecting UARTA as the debug console
<4>[ 0.308547] console_none_on_cmdline+uart_debug_init
<6>[ 0.308554] The debug console clock name is uarta_dbg
<6>[ 0.309757] ram_console: got buffer at beb00000, size 100000
<6>[ 0.309937] ram_console: uncorrectable error in header
<6>[ 0.309946] ram_console: no valid data in buffer (sig = 0x02034044)
<6>[ 0.324235] console [ram-1] enabled
<6>[ 0.324550] TPS6591x GPIO2 was reprogrammed to follow state of SLEEP input
<6>[ 0.324735] Registering the device TPS62361B
<6>[ 0.451272] Registering tegra-kbc
<6>[ 0.451437] Registering gpio keys
<4>[ 0.451665] Check TF202T setting
<4>[ 0.451669]
<6>[ 0.494957] fjm6mo i2c_register_board_info
<6>[ 0.495151] mi1040 i2c_register_board_info
<6>[ 0.495413] iCatch7002a i2c_register_board_info
<6>[ 0.495603] *** MPU START *** cardhu_mpuirq_init...
<6>[ 0.495871] initial mpu with TF700T config...
<6>[ 0.495971] *** MPU END *** mpuirq_init...
<7>[ 0.496177] gpio_request: gpio-72 (GMI_CS0) status -16
<3>[ 0.496354] set_unused_pin_gpio() Error in gpio_request() for gpio 72
<7>[ 0.496451] gpio_request: gpio-74 (GMI_CS1) status -16
<3>[ 0.496625] set_unused_pin_gpio() Error in gpio_request() for gpio 74
<7>[ 0.496725] gpio_request: gpio-83 (GMI_CS2) status -16
<3>[ 0.496900] set_unused_pin_gpio() Error in gpio_request() for gpio 83
<4>[ 0.497003] BOARD_PM269:TF700T_Elpida 800 MHZ version 5 (0413)
<3>[ 0.497260] tegra: invalid EMC DFS table: maximum rate 800000 kHz does not match nominal voltage 1200
<6>[ 0.497521] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
<6>[ 0.497622] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
<6>[ 0.497813] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>[ 0.498252] tegra_iovmm_register: added iovmm-smmu
<6>[ 0.504633] bio: create slab <bio-0> at 0
<6>[ 0.505324] vgaarb: loaded
<4>[ 0.505471] i2c-core: driver [tps6591x] using legacy suspend method
<4>[ 0.505646] i2c-core: driver [tps6591x] using legacy resume method
<4>[ 0.505840] i2c-core: driver [tps80031] using legacy suspend method
<4>[ 0.505936] i2c-core: driver [tps80031] using legacy resume method
<4>[ 0.506150] i2c-core: driver [ricoh583] using legacy suspend method
<4>[ 0.506247] i2c-core: driver [ricoh583] using legacy resume method
<5>[ 0.506682] SCSI subsystem initialized
<6>[ 0.506863] tegra-otg tegra-otg: otg transceiver registered
<6>[ 0.507185] usbcore: registered new interface driver usbfs
<6>[ 0.507350] usbcore: registered new interface driver hub
<6>[ 0.507624] usbcore: registered new device driver usb
<6>[ 0.509175] tps6591x 4-002d: VERNUM is 02
<6>[ 0.531278] Wake18 for irq=118
<6>[ 0.531452] Enabling wake18
<6>[ 0.531881] print_constraints: tps6591x_VIO: 1500 <--> 3300 mV at 1800 mV normal standby
<6>[ 0.532706] print_constraints: tps6591x_VDD_1: 600 <--> 1500 mV at 600 mV normal standby
<6>[ 0.533285] print_constraints: tps6591x_VDD_2: 600 <--> 1500 mV at 1200 mV normal standby
<6>[ 0.534152] print_constraints: tps6591x_VDDCTRL: 600 <--> 1400 mV at 1025 mV normal standby
<6>[ 0.534658] print_constraints: tps6591x_LDO_1: 1000 <--> 3300 mV at 2850 mV normal standby
<6>[ 0.534774] set_supply: tps6591x_LDO_1: supplied by tps6591x_VDD_2
<6>[ 0.535285] print_constraints: tps6591x_LDO_2: 1050 <--> 3300 mV at 1000 mV normal standby
<6>[ 0.535477] set_supply: tps6591x_LDO_2: supplied by tps6591x_VDD_2
<6>[ 0.535855] print_constraints: tps6591x_LDO_3: 1000 <--> 3300 mV at 1000 mV normal standby
<6>[ 0.536366] print_constraints: tps6591x_LDO_4: 1000 <--> 3300 mV at 1200 mV normal standby
<6>[ 0.536799] print_constraints: tps6591x_LDO_5: 1000 <--> 3300 mV at 1000 mV normal standby
<6>[ 0.537350] print_constraints: tps6591x_LDO_6: 1200 mV normal standby
<6>[ 0.537544] set_supply: tps6591x_LDO_6: supplied by tps6591x_VIO
<6>[ 0.538307] print_constraints: tps6591x_LDO_7: 1200 mV normal standby
<6>[ 0.538422] set_supply: tps6591x_LDO_7: supplied by tps6591x_VIO
<6>[ 0.539020] print_constraints: tps6591x_LDO_8: 1000 <--> 3300 mV at 1000 mV normal standby
<6>[ 0.539136] set_supply: tps6591x_LDO_8: supplied by tps6591x_VIO
<6>[ 0.539911] tps6591x register misc device for I2C stress test rc=0
<6>[ 0.546588] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[ 0.547109] Bluetooth: Core ver 2.16
<6>[ 0.547243] NET: Registered protocol family 31
<6>[ 0.547419] Bluetooth: HCI device and connection manager initialized
<6>[ 0.547518] Bluetooth: HCI socket layer initialized
<6>[ 0.547689] Bluetooth: L2CAP socket layer initialized
<6>[ 0.547869] Bluetooth: SCO socket layer initialized
<6>[ 0.548319] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 0.549190] print_constraints: fixed_reg_en_5v_cp: 5000 mV normal standby
<6>[ 0.550120] print_constraints: fixed_reg_en_5v0: 5000 mV normal standby
<6>[ 0.550848] print_constraints: fixed_reg_en_ddr: 1500 mV normal standby
<6>[ 0.551481] print_constraints: fixed_reg_en_3v3_sys: 3300 mV normal standby
<6>[ 0.552013] print_constraints: fixed_reg_en_3v3_modem: 3300 mV normal standby
<6>[ 0.552312] print_constraints: fixed_reg_cam1_ldo_en: 2800 mV normal standby
<6>[ 0.552500] set_supply: fixed_reg_cam1_ldo_en: supplied by fixed_reg_en_3v3_sys
<6>[ 0.552783] print_constraints: fixed_reg_cam2_ldo_en: 2800 mV normal standby
<6>[ 0.552892] set_supply: fixed_reg_cam2_ldo_en: supplied by fixed_reg_en_3v3_sys
<6>[ 0.553235] print_constraints: fixed_reg_cam3_ldo_en: 3300 mV normal standby
<6>[ 0.553337] set_supply: fixed_reg_cam3_ldo_en: supplied by fixed_reg_en_3v3_sys
<6>[ 0.553699] print_constraints: fixed_reg_en_vdd_com: 3300 mV normal standby
<6>[ 0.553887] set_supply: fixed_reg_en_vdd_com: supplied by fixed_reg_en_3v3_sys
<6>[ 0.554179] print_constraints: fixed_reg_en_3v3_fuse: 3300 mV normal standby
<6>[ 0.554368] set_supply: fixed_reg_en_3v3_fuse: supplied by fixed_reg_en_3v3_sys
<6>[ 0.554734] print_constraints: fixed_reg_en_3v3_emmc: 3300 mV normal standby
<6>[ 0.554840] set_supply: fixed_reg_en_3v3_emmc: supplied by fixed_reg_en_3v3_sys
<6>[ 0.555207] print_constraints: fixed_reg_en_1v8_cam: 1800 mV normal standby
<6>[ 0.555317] set_supply: fixed_reg_en_1v8_cam: supplied by tps6591x_VIO
<6>[ 0.555717] print_constraints: fixed_reg_dis_5v_switch: 5000 mV normal standby
<6>[ 0.555905] set_supply: fixed_reg_dis_5v_switch: supplied by fixed_reg_en_5v0
<6>[ 0.556322] print_constraints: fixed_reg_en_vdd_bl: 5000 mV normal standby
<6>[ 0.556692] print_constraints: fixed_reg_en_vdd_pnl1: 3300 mV normal standby
<6>[ 0.556880] set_supply: fixed_reg_en_vdd_pnl1: supplied by fixed_reg_en_3v3_sys
<6>[ 0.558281] print_constraints: tps62361B: 500 <--> 1770 mV at 1160 mV normal standby
<6>[ 0.558641] tps6236x register misc device for I2C stress test rc=0 tps->chip_id=1 chip_id=87
<6>[ 0.559016] print_constraints: gpio-switch-en_usb1_vbus_oc: 5000 mV normal standby
<7>[ 0.559176] gpio_request: gpio-122 (gpio-switch-en_vddio_vid_oc) status -16
<3>[ 0.559360] gpio-switch-regulator gpio-switch-regulator.17: Unable to request gpio 122
<3>[ 0.559540] gpio-switch-regulator gpio-switch-regulator.17: Unable to register regulator gpio-switch-en_vddio_vid_oc
<6>[ 0.559810] tegra: started io power detection dynamic control
<6>[ 0.559909] tegra: NO_IO_POWER setting 0x1200
<6>[ 0.560008] Switching to clocksource timer_us
<4>[ 0.560208] stop_machine_cpu_stop cpu=1
<4>[ 0.560216] stop_machine_cpu_stop cpu=2
<4>[ 0.560223] stop_machine_cpu_stop cpu=3
<4>[ 0.560230] stop_machine_cpu_stop cpu=0
<4>[ 0.560667] __stop_cpus: wait_for_completion_timeout+
<4>[ 0.560842] __stop_cpus: smp=0 done.executed=1 done.ret =0-
<6>[ 0.561290] Switched to NOHz mode on CPU #0
<6>[ 0.561498] Switched to NOHz mode on CPU #3
<6>[ 0.561505] Switched to NOHz mode on CPU #2
<6>[ 0.561535] Switched to NOHz mode on CPU #1
<6>[ 0.562155] tegra-nvmap tegra-nvmap: created carveout iram (255KiB)
<6>[ 0.563130] NET: Registered protocol family 2
<6>[ 0.563473] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.564003] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[ 0.565699] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
<6>[ 0.566618] TCP: Hash tables configured (established 131072 bind 65536)
<6>[ 0.566795] TCP reno registered
<6>[ 0.566894] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.567092] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.567607] NET: Registered protocol family 1
<6>[ 0.568039] RPC: Registered udp transport module.
<6>[ 0.568140] RPC: Registered tcp transport module.
<6>[ 0.568316] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[ 0.568416] PCI: CLS 0 bytes, default 32
<6>[ 0.568662] Unpacking initramfs...
<6>[ 0.647416] Freeing initrd memory: 1796K
<6>[ 0.647648] PMU: registered new PMU device of type 0
<6>[ 0.648210] Tegra auto-hotplug initialized: disabled
<4>[ 0.648312] tegra_cpufreq_init freq_table_size=14
<6>[ 0.648414] cpu-tegra: init EDP limit: 1550 MHz
<4>[ 0.648629] tegra_cpu_init : emc_clk->min_rate to 204M
<4>[ 0.648889] [Warning]tegra3_cpu_clk_set_rate set vdd_cpu as power source for cpu_g reg=ef946120
<4>[ 0.649296] tegra_cpu_init : emc_clk->min_rate to 204M
<4>[ 0.649486] tegra_cpu_init : emc_clk->min_rate to 204M
<4>[ 0.649672] tegra_cpu_init : emc_clk->min_rate to 204M
<6>[ 0.649939] vibrator_init+ #####
<6>[ 0.650191] vibrator_init- #####
<4>[ 0.670855] highmem bounce pool size: 64 pages
<6>[ 0.671113] ashmem: initialized
<6>[ 0.672253] fuse init (API version 7.16)
<6>[ 0.672490] Registering char device tf_driver (122:0)
<6>[ 0.673537] io scheduler noop registered
<6>[ 0.673702] io scheduler deadline registered
<6>[ 0.673831] io scheduler cfq registered (default)
<4>[ 0.674167] Check create a new adapter
<6>[ 0.694086] tegra_grhost tegra_grhost: initialized
<6>[ 0.694220] tegra_dc_module_init+ #####
<6>[ 0.694464] tegra_dc_module_init- #####
<4>[ 0.694926] Disp: diff_msec= 5938
<4>[ 0.695086] Check cardhu_panel_enable
<4>[ 0.695245] Check panel is panasonic
<4>[ 0.720676] Check power on/off for bridge IC
<4>[ 0.720766] Check enable TF301_1.8V
<4>[ 0.730939] Check enable TF301_I2C_Switch
<4>[ 0.741042] Check enable TF301_OSC
<4>[ 0.761127] Check tegra_dc_rgb_enable
<4>[ 0.761283] Check set polarity
<6>[ 0.761414] tegradc tegradc.0: probed
<6>[ 0.761710] tegradc tegradc.0: probed
<6>[ 0.762070] Wake4 for irq=335
<6>[ 0.762575] nvhdcp: using "always on" policy.
<6>[ 0.762920] tegradc tegradc.1: probed
<6>[ 0.763234] tegradc tegradc.1: probed
<3>[ 0.763345] hdmi: couldn't get regulator vdd_hdmi_con
<6>[ 0.763442] Wake4 for irq=335
<6>[ 0.763603] Enabling wake4
<6>[ 0.763692] gpio bank wake found: wake4 for irq=67
<6>[ 0.763779] Enabling wake4
<6>[ 0.764160] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[ 1.410772] serial8250.0: ttyS0 at MMIO 0x70006000 (irq = 68) is a Tegra
<6>[ 3.026014] console [ttyS0] enabled
<6>[ 3.150802] tegra_uart_init+ #####
<6>[ 3.154346] tegra_uart.1: ttyHS1 at I/O 0x0 (irq = 69) is a unknown
<6>[ 3.310681] Registered UART port ttyHS1
<6>[ 3.314658] tegra_uart.2: ttyHS2 at I/O 0x0 (irq = 78) is a unknown
<6>[ 3.470679] Registered UART port ttyHS2
<6>[ 3.474652] tegra_uart.3: ttyHS3 at I/O 0x0 (irq = 122) is a unknown
<6>[ 3.630680] Registered UART port ttyHS3
<6>[ 3.634653] tegra_uart.4: ttyHS4 at I/O 0x0 (irq = 123) is a unknown
<6>[ 3.790678] Registered UART port ttyHS4
<6>[ 3.794737] tegra_uart_init- #####
<6>[ 3.798212] Initialized tegra uart driver
<6>[ 3.804472] loop: module loaded
<4>[ 3.807866] i2c-core: driver [apds9802als] using legacy suspend method
<4>[ 3.814485] i2c-core: driver [apds9802als] using legacy resume method
<4>[ 3.821122] nct1008_probe+
<4>[ 3.823926] nct1008_power_control
<6>[ 3.827318] nct1008 4-004c: success in enabling rail vdd_nct1008
<6>[ 3.835702] nct1008 register misc device for I2C stress test rc=0
<6>[ 3.841955] nct1008 4-004c: nct1008_probe: initialized
<4>[ 3.921247] nct1008_get_temp: ret temp=26C
<4>[ 3.926344] nct1008_get_temp: ret temp=26C
<4>[ 3.930969] tegra_watchdog_enable timeout=45
<4>[ 3.935316] nct1008_probe-
<4>[ 3.938136] i2c-core: driver [nct1008] using legacy suspend method
<4>[ 3.944472] i2c-core: driver [nct1008] using legacy resume method
<6>[ 3.950646] bcm4329_rfkill_init+ #####
<4>[ 3.954610] bcm4329_rfkill_probe: can't find bcm4329_32k_clk. assuming 32k clock to chip
<4>[ 3.963042] bcm4329_rfkill_probe : can't find reset gpio.
<6>[ 3.968699] bcm4329_rfkill_init- #####
<6>[ 3.972533] mpu_init+ #####
<6>[ 3.975401] mpu_init- #####
<6>[ 3.978400] kxtf9_mod_init+ #####
<6>[ 3.981806] kxtf9_mod_init- #####
<6>[ 3.985193] ami306_mod_init+ #####
<6>[ 3.988741] ami306_mod_init- #####
<3>[ 3.992300] vibrator_init:Couldn't get regulator vdd_vbrtr
<6>[ 3.997911] Loading pn544 driver
<7>[ 4.001332] gpio_request: gpio-184 (nfc_int) status -16
<6>[ 4.006857] PPP generic driver version 2.4.2
<6>[ 4.011315] PPP Deflate Compression module registered
<6>[ 4.016510] PPP BSD Compression module registered
<6>[ 4.023016] PPP MPPE Compression module registered
<6>[ 4.027959] NET: Registered protocol family 24
<6>[ 4.032521] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
<6>[ 4.040070] tun: Universal TUN/TAP device driver, 1.6
<6>[ 4.045211] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>[ 4.051696] usbcore: registered new interface driver asix
<6>[ 4.057198] usbcore: registered new interface driver cdc_ether
<6>[ 4.063225] usbcore: registered new interface driver smsc95xx
<6>[ 4.069071] usbcore: registered new interface driver cdc_subset
<6>[ 4.075148] cdc_ncm: 23-Apr-2011
<6>[ 4.078480] usbcore: registered new interface driver cdc_ncm
<6>[ 4.084296] asuspec_init+ #####
<5>[ 4.087513] asuspec: [asuspec_init] cdev_alloc
<6>[ 4.092222] Wake9 for irq=370
<6>[ 4.095339] Wake9 for irq=370
<6>[ 4.098451] Enabling wake9
<6>[ 4.101232] gpio bank wake found: wake9 for irq=87
<6>[ 4.106086] Enabling wake9
<5>[ 4.108976] asuspec: [asuspec_send_ec_req] send EC_Request
<4>[ 4.114590] i2c-core: driver [asuspec] using legacy suspend method
<4>[ 4.120925] i2c-core: driver [asuspec] using legacy resume method
<6>[ 4.127190] asuspec_init- #####
<6>[ 4.130407] asusdec_init+ #####
<5>[ 4.133707] asusdec: [asusdec_init] cdev_alloc
<3>[ 4.138394] power_supply dock_battery: driver failed to report `status' property
<3>[ 4.145988] power_supply dock_battery: driver failed to report `status' property
<6>[ 4.153613] input: lid_input as /devices/platform/tegra-i2c.1/i2c-1/1-0019/input/input0
<6>[ 4.161867] Wake28 for irq=374
<6>[ 4.165025] Wake28 for irq=374
<6>[ 4.168222] Enabling wake28
<5>[ 4.171123] asusdec: [asusdec_irq_hall_sensor] LID open
<6>[ 4.176443] Wake29 for irq=375
<6>[ 4.179670] Wake29 for irq=375
<6>[ 4.182797] Enabling wake29
<4>[ 4.185722] i2c-core: driver [asusdec] using legacy suspend method
<5>[ 4.185746] asusdec: [asusdec_dock_init_work_function] TF201 dock-init
<5>[ 4.185755] asusdec: [asusdec_dock_init_work_function] No dock detected
<4>[ 4.205387] i2c-core: driver [asusdec] using legacy resume method
<6>[ 4.211651] asusdec_init- #####
<6>[ 4.214941] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 4.221588] tegra_ehci_probe+ #####
<3>[ 4.229324] Timed out waiting for lock bit on pll pll_u
<6>[ 4.234495] phy->instance= 2 , phy->xcvr_setup_value=61
<5>[ 4.240695] asusdec: [asusdec_lid_report_function] SW_LID report value = 0
<6>[ 4.242601] tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
<6>[ 4.242720] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 1
<5>[ 4.261403] asusdec: [asusdec_pad_battery_report_function] dock_in = 0, ret_val = -1
<4>[ 4.269287] audio_dock_in_out: global_audio_codec is NULL
<5>[ 4.274768] asusdec: [asusAudiodec_in_out_work_function] audio dock out
<6>[ 4.320699] tegra-ehci tegra-ehci.2: irq 129, io mem 0x7d008000
<6>[ 4.340690] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00
<6>[ 4.346738] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 4.353683] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 4.360984] usb usb1: Product: Tegra EHCI Host Controller
<6>[ 4.366525] usb usb1: Manufacturer: Linux 2.6.39.4-cyanogenmod-g80ca3c6 ehci_hcd
<6>[ 4.373997] usb usb1: SerialNumber: tegra-ehci.2
<6>[ 4.379036] hub 1-0:1.0: USB hub found
<6>[ 4.382918] hub 1-0:1.0: 1 port detected
<7>[ 4.387227] gpio_request: gpio-164 (DOCK_IN) status -16
<3>[ 4.392572] DOCK_IN GPIO164 request fault!-16
<6>[ 4.397032] gpio_dock_in_irq_init: request irq = 388, ret = 0
<6>[ 4.402963] tegra_ehci_probe- #####
<6>[ 4.406706] usbcore: registered new interface driver cdc_acm
<6>[ 4.412555] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[ 4.421217] usbcore: registered new interface driver cdc_wdm
<6>[ 4.427047] Initializing USB Mass Storage driver...
<6>[ 4.432104] usbcore: registered new interface driver usb-storage
<6>[ 4.438280] USB Mass Storage support registered.
<6>[ 4.443065] usbcore: registered new interface driver libusual
<6>[ 4.449076] usbcore: registered new interface driver usbserial
<6>[ 4.455047] USB Serial support registered for generic
<6>[ 4.460309] usbcore: registered new interface driver usbserial_generic
<6>[ 4.466942] usbserial: USB Serial Driver core
<6>[ 4.471507] USB Serial support registered for GSM modem (1-port)
<6>[ 4.477694] usbcore: registered new interface driver option
<5>[ 4.483451] asuspec: [asuspec_chip_init] Model Name: ASUS-TF201-PAD
<6>[ 4.489824] option: v0.7.2:USB Driver for GSM modems
<6>[ 4.495003] USB Serial support registered for pl2303
<5>[ 4.500061] asuspec: [asuspec_chip_init] EC-FW Version: PAD-EC20T-0216
<6>[ 4.506796] usbcore: registered new interface driver pl2303
<6>[ 4.512475] pl2303: Prolific PL2303 USB to serial adaptor driver
<6>[ 4.518682] USB Serial support registered for Qualcomm USB modem
<6>[ 4.524851] usbcore: registered new interface driver qcserial
<5>[ 4.530777] asuspec: [asuspec_chip_init] PCBA Version: TF201-PAD-SKU1
<6>[ 4.537302] NVidia Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
<7>[ 4.545135] gpio_request: gpio-164 (DOCK_IN) status -16
<3>[ 4.550533] DOCK_IN GPIO164 request fault!-16
<5>[ 4.554986] asuspec: [asuspec_enter_normal_mode] Entering normal mode
<6>[ 4.561601] gpio_limit_set1_irq_init: request irq = 285, ret = 0
<6>[ 4.567805] fsl_udc_probe()
<5>[ 4.570710] asuspec: [asuspec_work_function] 0x1 0x0 0xff 0xff
<6>[ 4.576805] phy->instance= 0 , phy->xcvr_setup_value=61
<3>[ 4.582298] fsl-tegra-udc fsl-tegra-udc: can't get charge regulator,err:-19
<6>[ 4.589463] tegra-otg tegra-otg: SUSPEND --> PERIPHERAL
<6>[ 4.594779] fsl_vbus_session, vbus_active=0, is_active=1
<6>[ 4.600360] android init
<3>[ 4.603191] pid != TF300TG, cancel acm ports
<3>[ 4.607535] pid != TF300TL, cancel serial ports
<4>[ 4.612572] Gadget Android: controller 'fsl-tegra-udc' not recognized
<6>[ 4.619088] android_usb gadget: android_usb ready
<6>[ 4.623965] fsl-tegra-udc: bind to driver android_usb
<7>[ 4.629214] gpio_set_debounce: gpio-168 status -22
<6>[ 4.634166] Wake24 for irq=392
<6>[ 4.637457] input: gpio-keys as /devices/platform/gpio-keys.0/input/input1
<6>[ 4.644481] gpio_keys: Reported pressed KEY_POWER
<6>[ 4.649266] gpio_keys: Released KEY_POWER
<6>[ 4.700842] Wake17 for irq=117
<6>[ 4.704170] input: tegra-kbc as /devices/platform/tegra-kbc/input/input2
<6>[ 4.711106] usbcore: registered new interface driver xpad
<6>[ 4.716647] mxt_init+ #####
<6>[ 4.719570] mxt_init- #####
<6>[ 4.722457] [elan] elan_ktf3k_ts_init
<6>[ 4.726269] elan-ktf3k 1-0010: [ELAN] Start HW reset!
<6>[ 4.790679] cable_detection_work_handler, vbus_active=0, is_active=1
<6>[ 4.797104] The USB cable is connected (0.5A)
<4>[ 4.810673] ========================================================
<4>[ 4.817096] battery_callback usb_cable_state =1
<4>[ 4.840670] ========================================================
<4>[ 4.847092] battery_callback battery driver not ready
<4>[ 4.852297] Touch charger state: 1
<7>[ 5.017939] [elan] GPIO_TP_INT_N=60
<6>[ 5.021511] elan-ktf3k 1-0010: The boot code is new!
<6>[ 5.767576] elan-ktf3k 1-0010: [elan] __hello_packet_handler: hello packet 55:55:55:55
<6>[ 5.775646] elan-ktf3k 1-0010: [elan] hello packet's rc = 0
<6>[ 5.970678] mpu_delay_init+ #####
<6>[ 5.974093] mpu_probe+ #####
<6>[ 5.977123] i2c i2c-2: mpu_probe: 0
<6>[ 5.991065] elan-ktf3k 1-0010: [elan] __fw_packet_handler: firmware version: 0x7053
<6>[ 5.999224] elan-ktf3k 1-0010: [elan] __fw_packet_handler: X resolution: 0x0000
<6>[ 6.006627] kxtf9_mod_delay_init+ #####
<6>[ 6.010970] elan-ktf3k 1-0010: [elan] __fw_packet_handler: Y resolution: 0x0000
<6>[ 6.018703] elan-ktf3k 1-0010: [elan] __fw_packet_handler: firmware id: 0x3024
<6>[ 6.026114] ami306_mod_delay_init+ #####
<6>[ 6.030183] elan-ktf3k 1-0010: [Elan] Max X=2944, Max Y=1856
<6>[ 6.036162] input: elan-touchscreen as /devices/virtual/input/input3
<4>[ 6.042776] /proc/ektf_dbg created
<6>[ 6.046622] elan-ktf3k 1-0010: [elan] Start touchscreen elan-touchscreen in interrupt mode
<4>[ 6.055070] [ELAN]misc_register finished!!
<6>[ 6.059171] elan-ktf3k 1-0010: Update power source to 2
<6>[ 6.067290] i2c i2c-2: Installing irq using 409
<6>[ 6.071923] i2c i2c-2: Module Param interface = mpuirq
<6>[ 6.077306] mpu_probe- #####
<6>[ 6.080288] i2c i2c-2: kxtf9_mod_probe: kxtf9
<6>[ 6.084809] i2c i2c-2: inv_mpu_register_slave: +kxtf9 Type 1: Addr: f IRQ: 341, Adapt: 2
<6>[ 6.093196] mpu_delay_init: Probe name mpu3050
<6>[ 6.097781] mpu_delay_init- #####
<6>[ 6.101185] kxtf9_init+ #####
<6>[ 6.112940] rtc_tps6591x rtc_tps6591x.0: RTC Time : 1/20/2000 15:38:11
<6>[ 6.120682] kxtf9_init- #####
<6>[ 6.123744] tps6591x 4-002d:
<6>[ 6.123747] getting alarm time::
<6>[ 6.130241] rtc_tps6591x rtc_tps6591x.0: RTC Time : 1/1/1900 0:0:0
<6>[ 6.136506] i2c i2c-2: Installing accelirq irq using 341
<6>[ 6.141972] Wake0 for irq=341
<6>[ 6.145131] i2c i2c-2: ami306_mod_probe: ami306
<6>[ 6.149742] i2c i2c-2: inv_mpu_register_slave: +ami306 Type 2: Addr: e IRQ: 400, Adapt: 2
<6>[ 6.158302] kxtf9_mod_delay_init: Probe name kxtf9_mod
<6>[ 6.163549] ami306_init+ #####
<6>[ 6.168698] rtc_tps6591x rtc_tps6591x.0: RTC Time : 1/20/2000 15:38:11
<6>[ 6.175537] using rtc device, rtc_tps6591x, for alarms
<6>[ 6.180661] rtc_tps6591x rtc_tps6591x.0: rtc core: registered rtc_tps6591x as rtc0
<6>[ 6.191722] rtc_tps6591x rtc_tps6591x.0: RTC Time : 1/20/2000 15:38:11
<6>[ 6.320823] i2c /dev entries driver
<6>[ 6.324749] Linux video capture interface: v2.00
<6>[ 6.329590] usbcore: registered new interface driver uvcvideo
<6>[ 6.335437] USB Video Class driver (v1.0.0)
<6>[ 6.339867] trpc_sema_init: registered misc dev 10:44
<6>[ 6.345900] trpc_node_register: Adding 'local' to node list
<6>[ 6.353611] nvavp nvavp: allocated IOVM at ff00000 for AVP os
<6>[ 6.359722] tegra_camera tegra_camera: tegra_camera_probe
<6>[ 6.365729] yuv fjm6mo sensor_init+ #####
<6>[ 6.659354] ami306_init- #####
<6>[ 6.662509] i2c i2c-2: Installing compassirq irq using 400
<6>[ 6.668289] yuv sensor_probe, compiled at Sep 14 2012 09:15:13
<4>[ 6.674272] yuv_sensor_power_on+
<6>[ 6.677584] gpio 143 set to 0
<6>[ 6.680756] ami306_mod_delay_init: Probe name ami306_mod
<6>[ 6.686140] ami306_mod_delay_init- #####
<7>[ 6.690154] gpio_request: gpio-143 (isp_power_1v2_en) status -16
<3>[ 6.696240] yuv_sensor_power_on_TF700T: gpio_request failed for gpio TF700T_ISP_POWER_1V2_EN_GPIO
<6>[ 6.705259] gpio 143 set to 1
<6>[ 6.708302] gpio 223 set to 0
<6>[ 6.711356] gpio 223 set to 1
<4>[ 6.731210] camera mclock on
<4>[ 6.734189] -tegra_camera_mclk_on_off
<6>[ 6.737922] gpio 216 set to 0
<6>[ 6.740976] gpio 216 set to 1
<4>[ 6.744089] yuv_sensor_power_on -
<6>[ 6.763793] fjm6mo check version number 0xb03400 1
<4>[ 6.768653] yuv_sensor_power_off+
<6>[ 6.772127] gpio 216 set to 0
<4>[ 6.775172] -tegra_camera_mclk_on_off
<6>[ 6.779054] gpio 223 set to 0
<6>[ 6.782181] gpio 143 set to 0
<4>[ 6.785218] yuv_sensor_power_off-
<6>[ 6.788647] yuv fjm6mo sensor_init- #####
<6>[ 6.792742] sensor_init+ #####
<6>[ 6.795965] yuv sensor_probe
<6>[ 6.799055] sensor_init- #####
<4>[ 6.802225] pad_probe: client->addr=b
<4>[ 6.806201] pad_get_psp: pad_device->battery_present=0
<3>[ 6.811427] pad-battery 4-000b: pad_get_psp: i2c read for 7 failed
<3>[ 6.817748] power_supply battery: driver failed to report `status' property
<4>[ 6.824821] pad_get_psp: pad_device->battery_present=0
<3>[ 6.830104] pad-battery 4-000b: pad_get_psp: i2c read for 7 failed
<6>[ 6.836560] pad-battery 4-000b: pad-battery: battery driver registered
<3>[ 6.843260] power_supply battery: driver failed to report `status' property
<6>[ 6.850394] Wake26 for irq=373
<6>[ 6.853654] The USB cable status = 1
<4>[ 6.857334] setup_irq: battery_present =1
<6>[ 6.861693] Wake25 for irq=372
<6>[ 6.864921] Wake25 for irq=372
<6>[ 6.868047] Enabling wake25
<4>[ 6.870921] setup_low_battery_irq:low_battery_present=0
<6>[ 6.876446] battery register misc device for I2C stress test rc=0
<4>[ 6.882663] i2c-core: driver [pad-battery] using legacy suspend method
<4>[ 6.889332] i2c-core: driver [pad-battery] using legacy resume method
<6>[ 6.895936] al3010_init+ #####
<4>[ 6.899064] light sensor info : al3010 init
<4>[ 6.903530] light sensor info : al3010 probe successed
<6>[ 6.908735] al3010 2-001c: driver version 1.0 enabled
<4>[ 6.914089] i2c-core: driver [al3010] using legacy suspend method
<4>[ 6.920253] i2c-core: driver [al3010] using legacy resume method
<6>[ 6.926438] al3010_init- #####
<6>[ 6.929657] device-mapper: uevent: version 1.0.3
<6>[ 6.934484] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
<6>[ 6.943020] Bluetooth: HCI UART driver ver 2.2
<6>[ 6.947611] Bluetooth: HCI H4 protocol initialized
<6>[ 6.952481] Bluetooth: HCILL protocol initialized
<6>[ 6.957257] Bluetooth: BlueSleep Mode Driver Ver 1.1
<6>[ 6.962371] bluesleep_init+ #####
<6>[ 6.965808] Wake7 for irq=390
<6>[ 6.968917] bluesleep_init- #####
<6>[ 6.972870] cpuidle: using governor ladder
<6>[ 6.977303] cpuidle: using governor menu
<6>[ 6.981343] sdhci: Secure Digital Host Controller Interface driver
<6>[ 6.987662] sdhci: Copyright(c) Pierre Ossman
<6>[ 6.992094] sdhci_drv_init+ #####
<6>[ 6.995621] [mmc]:tegra_sdhci_pltfm_init:914 mmc0: built_in 1
<6>[ 7.002232] sdhci sdhci-tegra.3: Error: tegra3 io dpd not supported for sdhci-tegra.3
<4>[ 7.011219] mmc0: Invalid maximum block size, assuming 512 bytes
<6>[ 7.017315] mmc0: no vmmc regulator found
<4>[ 7.021484] ========================================================
<6>[ 7.021588] tegra_usb_suspend+
<6>[ 7.021594] tegra->phy->instance=2
<6>[ 7.021599] tegra_usb_suspend: before ehci_halt
<6>[ 7.021606] tegra_usb_suspend: after ehci_halt, ret = 0
<6>[ 7.021625] tegra_usb_suspend-
<6>[ 7.050945] [mmc]:mmc_detect_change:1394 mmc0: gpio_69:0
<6>[ 7.056331] [mmc]:mmc_schedule_delayed_work:88 mmc0: delay 0
<6>[ 7.062156] mmc0: SDHCI controller on platform [sdhci-tegra.3] using ADMA
<6>[ 7.062167] [mmc]:mmc_rescan:1812 mmc0: gpio_69:0 rescan_disable 0
<4>[ 7.063289] docking_callback 1 docking_in =0 pu4=1
<4>[ 7.063294] ========================================================
<4>[ 7.063301] disable_irq(gpio_to_irq(TEGRA_GPIO_PS5)
<5>[ 7.063309] asusdec: [asusdec_pad_battery_report_function] dock_in = 0, ret_val = 0
<6>[ 7.099621] sdhci sdhci-tegra.2: Error: tegra3 io dpd not supported for sdhci-tegra.2
<4>[ 7.111980] mmc1: Invalid maximum block size, assuming 512 bytes
<6>[ 7.118087] mmc1: no vmmc regulator found
<4>[ 7.128944] mmc1 clock request: 101KHz. currently 48000KHz
<4>[ 7.139558] mmc1 clock request: 0KHz. currently 48000KHz
<6>[ 7.145039] [mmc]:mmc_detect_change:1394 mmc1: gpio_69:0
<6>[ 7.150422] [mmc]:mmc_schedule_delayed_work:88 mmc1: delay 0
<6>[ 7.156239] mmc1: SDHCI controller on platform [sdhci-tegra.2] using ADMA
<6>[ 7.156250] [mmc]:mmc_rescan:1812 mmc1: gpio_69:0 rescan_disable 0
<4>[ 7.157313] mmc1 clock request: 101KHz. currently 48000KHz
<4>[ 7.157330] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 7.170713] mmc1 clock request: 400KHz. currently 48000KHz
<6>[ 7.188085] Wake23 for irq=293
<6>[ 7.199411] Wake23 for irq=293
<6>[ 7.202540] Enabling wake23
<6>[ 7.205404] gpio bank wake found: wake23 for irq=66
<6>[ 7.210421] Enabling wake23
<6>[ 7.219353] [mmc]:tegra_sdhci_pltfm_init:869 mmc2: non-built_in 0
<6>[ 7.242402] [mmc]:mmc_decode_cid:111 cid.prv 0x6f
<6>[ 7.245879] sdhci sdhci-tegra.0: Error: tegra3 io dpd not supported for sdhci-tegra.0
<4>[ 7.246898] mmc2: Invalid maximum block size, assuming 512 bytes
<6>[ 7.246921] mmc2: no vmmc regulator found
<6>[ 7.247999] [mmc]:mmc_power_off:1242 mmc2:vdd_slot_reg: use_count 1
<6>[ 7.248007] [mmc]:mmc_power_off:1245 mmc2:vdd_io_reg: use_count 0
<6>[ 7.250232] [mmc]:mmc_detect_change:1394 mmc2: gpio_69:0
<6>[ 7.250239] [mmc]:mmc_schedule_delayed_work:88 mmc2: delay 0
<6>[ 7.250263] mmc2: SDHCI controller on platform [sdhci-tegra.0] using ADMA
<6>[ 7.250313] sdhci_drv_init- #####
<6>[ 7.251694] tegra-se tegra-se: tegra_se_probe: complete
<6>[ 7.252042] usbcore: registered new interface driver usbhid
<6>[ 7.252047] usbhid: USB HID core driver
<6>[ 7.252316] logger: created 256K log 'log_main'
<6>[ 7.252372] logger: created 256K log 'log_events'
<6>[ 7.252436] logger: created 256K log 'log_radio'
<6>[ 7.252494] logger: created 256K log 'log_system'
<6>[ 7.252633] RIL: [ril_init] RIL init
<3>[ 7.252640] RIL: [ril_init] Ril driver doesn't support this project
<4>[ 7.303421] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 7.304483] mmc1 clock request: 101KHz. currently 48000KHz
<4>[ 7.304499] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 7.320716] mmc1 clock request: 300KHz. currently 48000KHz
<6>[ 7.376947] [mmc]:mmc_read_ext_csd:259 ext_csd.sectors 0x3b34000 prod_name HYNIX BOOT_SIZE_MULTI 0x10
<4>[ 7.385331] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 7.386393] mmc1 clock request: 101KHz. currently 48000KHz
<4>[ 7.386412] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 7.400717] mmc1 clock request: 200KHz. currently 48000KHz
<4>[ 7.431478] mmc0: switch to bus width 1 ddr 0 failed
<3>[ 7.437548] mmc0: error -110 whilst initialising MMC card
<4>[ 7.485362] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 7.490840] mmc1 clock request: 101KHz. currently 48000KHz
<4>[ 7.498505] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 7.530738] mmc1 clock request: 101KHz. currently 48000KHz
<6>[ 7.574598] [mmc]:mmc_decode_cid:111 cid.prv 0x6f
<6>[ 7.605782] [mmc]:mmc_read_ext_csd:259 ext_csd.sectors 0x3b34000 prod_name HYNIX BOOT_SIZE_MULTI 0x10
<4>[ 7.618292] mmc1 clock request: 0KHz. currently 48000KHz
<6>[ 7.623699] [mmc]:mmc_rescan:1897 mmc1: extend_wakelock 0
<4>[ 7.648918] mmc0: switch to bus width 1 ddr 0 failed
<3>[ 7.655010] mmc0: error -110 whilst initialising MMC card
<6>[ 7.763997] [mmc]:mmc_decode_cid:111 cid.prv 0x6f
<6>[ 7.791113] [mmc]:mmc_read_ext_csd:259 ext_csd.sectors 0x3b34000 prod_name HYNIX BOOT_SIZE_MULTI 0x10
<4>[ 7.820391] mmc0: switch to bus width 1 ddr 0 failed
<3>[ 7.825463] mmc0: error -110 whilst initialising MMC card
<6>[ 7.851038] rt5631_modinit+ #####
<4>[ 7.854426] codec_3v3_power_switch_init
<7>[ 7.858335] gpio_request: gpio-120 (rt5631_3v3_power_control) status -16
<4>[ 7.865258] rt5631_3v3_power_control: request rt5631_3v3_power_control fail! : -16
<4>[ 7.873006] rt5631_i2c_probe+
<6>[ 7.876039] RT5631 Audio Codec 0.01 alsa 1.0.24
<4>[ 7.880763] rt5631_i2c_probe-
<6>[ 7.885966] rt5631_modinit- #####
<6>[ 7.895412] tegra_rt5631_modinit+ #####
<4>[ 7.901370] tegra_rt5631_modinit(): support codec rt5631
<4>[ 7.908875] tegra_rt5631_driver_probe+
<6>[ 7.977245] [mmc]:mmc_decode_cid:111 cid.prv 0x6f
<6>[ 8.006198] RT5631 initial ok!
<4>[ 8.009390] ************************realtek_ce_init_hwdep*************************************
<4>[ 8.018387] tegra_rt5631_init+
<3>[ 8.021977] rt5631 4-001a: asoc: failed to add dapm kcontrol AXO2MIX Mixer OUTVOLL Playback Switch: -16
<6>[ 8.031555] [mmc]:mmc_read_ext_csd:259 ext_csd.sectors 0x3b34000 prod_name HYNIX BOOT_SIZE_MULTI 0x10
<6>[ 8.047398] asoc: rt5631-hifi <-> tegra30-i2s.1 mapping ok
<6>[ 8.053672] asoc: dit-hifi <-> tegra30-spdif mapping ok
<4>[ 8.075286] mmc0: switch to bus width 1 ddr 0 failed
<3>[ 8.080416] mmc0: error -110 whilst initialising MMC card
<4>[ 8.086351] tegra_rt5631_driver_probe-
<6>[ 8.090290] tegra_rt5631_modinit- #####
<6>[ 8.094216] tegra_wm8903_modinit+ #####
<4>[ 8.098124] tegra_wm8903_modinit(): not support codec wm8903
<6>[ 8.106040] [mmc]:mmc_rescan:1897 mmc0: extend_wakelock 0
<6>[ 8.111527] [mmc]:mmc_rescan:1812 mmc2: gpio_69:0 rescan_disable 0
<6>[ 8.118922] headset_init+ #####
<4>[ 8.122150] HEADSET: Headset detection init
<4>[ 8.126556] HEADSET: Headset detection mode
<6>[ 8.130902] [mmc]:mmc_power_up:1194 mmc2:vdd_io_reg: use_count 0
<6>[ 8.136977] [mmc]:mmc_power_up:1197 mmc2:vdd_slot_reg: use_count 0
<4>[ 8.143308] HEADSET: Config Headset Button detection gpio
<7>[ 8.148776] gpio_request: gpio-186 (btn_INT) status -16
<4>[ 8.154196] HEADSET: Config Jack-in detection gpio
<4>[ 8.159337] HEADSET: Turn on micbias power
<6>[ 8.164461] Wake12 for irq=402
<6>[ 8.167672] Wake12 for irq=402
<6>[ 8.170798] Enabling wake12
<6>[ 8.173665] gpio bank wake found: wake12 for irq=119
<6>[ 8.178768] Enabling wake12
<4>[ 8.210202] HEADSET: Turn off micbias power
<4>[ 8.215869] HEADSET: Config LineOut detection gpio
<6>[ 8.222887] headset_init- #####
<6>[ 8.226124] fm34_init+ #####
<6>[ 8.229098] fm34_init()
<6>[ 8.231859] fm34: [fm34_chip_init] GPIO = 115 , state = 1
<6>[ 8.237332] fm34: [fm34_chip_init] GPIO = 222 , state = 1
<4>[ 8.381684] mmc2: host does not support reading read-only switch. assuming write-enable.
<6>[ 8.391975] mmc2: new high speed SD card at address 1234
<6>[ 8.397792] mmcblk0: mmc2:1234 SA02G 1.85 GiB
<6>[ 8.402593] fm34_probe()
<6>[ 8.405247] fm34_init- #####
<6>[ 8.408274] ALSA device list:
<6>[ 8.411348] fm34: [fm34_reconfig] ReConfigure DSP
<6>[ 8.416262] #0: HDA NVIDIA Tegra at 0x70038000 irq 113
<6>[ 8.421732] #1: tegra-codec
<6>[ 8.425025] oprofile: using arm/armv7-ca9
<6>[ 8.429224] GACT probability NOT on
<6>[ 8.432894] fm34: [fm34_reset_DSP] GPIO = 115 , state = 0
<6>[ 8.438366] fm34: [fm34_reset_DSP] GPIO = 115 , state = 1
<6>[ 8.444028] Mirror/redirect action on
<6>[ 8.447803] u32 classifier
<6>[ 8.450831] Actions configured
<6>[ 8.454349] Netfilter messages via NETLINK v0.30.
<6>[ 8.459281] mmcblk0: p1
<6>[ 8.462265] [mmc]:mmc_rescan_try_freq:1790 mmc2: SD completed
<6>[ 8.468163] [mmc]:mmc_rescan:1897 mmc2: extend_wakelock 1
<6>[ 8.473719] nf_conntrack version 0.5.0 (15611 buckets, 62444 max)
<6>[ 8.480262] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 8.487322] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 8.493467] xt_time: kernel timezone is -0000
<6>[ 8.498066] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 8.503691] arp_tables: (C) 2002 David S. Miller
<6>[ 8.508429] TCP cubic registered
<6>[ 8.511845] NET: Registered protocol family 10
<6>[ 8.517359] Mobile IPv6
<6>[ 8.519907] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 8.525406] IPv6 over IPv4 tunneling driver
<6>[ 8.530619] NET: Registered protocol family 17
<6>[ 8.535179] NET: Registered protocol family 15
<6>[ 8.539806] Bluetooth: RFCOMM TTY layer initialized
<6>[ 8.544847] Bluetooth: RFCOMM socket layer initialized
<6>[ 8.550056] Bluetooth: RFCOMM ver 1.11
<6>[ 8.554026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 8.559411] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 8.565618] NET: Registered protocol family 37
<6>[ 8.570135] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
<5>[ 8.578087] Registering SWP/SWPB emulation handler
<6>[ 8.583243] fm34: [fm34_config_DSP] DSP ACK, read 0xc0: 1
<6>[ 8.588875] fm34: [fm34_config_DSP] Load TF201 DSP parameters
<4>[ 8.602196] Disabling clocks left on by bootloader:
<4>[ 8.607231] uarta
<4>[ 8.609506] fuse_burn
<4>[ 8.612210] cclk_lp
<4>[ 8.614649] pll_x_out0
<4>[ 8.617352] pll_d2_out0
<4>[ 8.620211] pll_p_out2
<4>[ 8.622924] pll_c_out1
<4>[ 8.625623] pll_m_out1
<6>[ 8.628422] CPU rate: 1150 MHz
<4>[ 8.632514] tegra3_dvfs: minimum cap.cbus rate 247000000 requires 1000 mV
<4>[ 8.639264] tegra3_dvfs: minimum cap.emc rate 400000000 requires 1000 mV
<6>[ 8.646242] tegra dvfs: tegra sysfs cap interface is initialized
<6>[ 8.652798] tegra_actmon.emc: Completed initialization (0)
<6>[ 8.658697] tegra_actmon.avp: Completed initialization (0)
<4>[ 8.665547] [DHD] ## wifi_probe
<4>[ 8.668841] [DHD] wifi_set_power = 1
<6>[ 8.790679] fm34: [fm34_config_DSP] config_length = 1497
<6>[ 8.796085] fm34: [fm34_config_DSP] DSP configuration is done
<4>[ 8.940685] tegra_watchdog_touch
<4>[ 8.944478] nct1008_get_temp: ret temp=27C
<4>[ 8.948923] Reg Status Reg 0x02 Value 0x80
<4>[ 8.954644] Reg Configuration Reg 0x03 Value 0x04
<4>[ 8.977295] [DHD] wifi_set_carddetect = 1
<6>[ 8.981487] [mmc]:mmc_detect_change:1394 mmc1: gpio_69:0
<6>[ 8.986867] [mmc]:mmc_schedule_delayed_work:88 mmc1: delay 0
<6>[ 8.992721] [mmc]:mmc_rescan:1812 mmc1: gpio_69:0 rescan_disable 0
<4>[ 8.992797] [DHD]
<4>[ 8.992800] Dongle Host Driver, version 5.90.125.94.1
<4>[ 8.992803] Compiled in drivers/net/wireless/bcmdhd on Sep 14 2012 at 09:15:57
<4>[ 9.014703] mmc1 clock request: 101KHz. currently 48000KHz
<4>[ 9.020296] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 9.040711] mmc1 clock request: 400KHz. currently 48000KHz
<4>[ 9.072807] mmc1 clock request: 50000KHz. currently 48000KHz
<6>[ 9.080855] mmc1: new high speed SDIO card at address 0001
<4>[ 9.087203] [DHD] bcmdhd: fw_path: /system/vendor/firmware/bcm4330/fw_bcmdhd.bin nvram_path: /system/etc/nvram_4330.txt
<4>[ 9.098272] [DHD] F1 signature read @0x18000000=0x16044330
<4>[ 9.104077] [DHD] sih->chiprev = 4
<4>[ 9.107618] [DHD] BCM4330B2 found!
<4>[ 9.114670] [DHD] DHD: dongle ram size is set to 294912(orig 294912)
<4>[ 9.121768] wl_create_event_handler thr:66 started
<4>[ 9.126832] dhd_attach thr:67 started
<4>[ 9.130631] dhd_attach thr:68 started
<4>[ 9.134545] dhd_attach thr:69 started
<4>[ 9.138992] [DHD] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
<4>[ 9.148044] [DHD] wifi_set_power = 0
<6>[ 9.156147] [mmc]:mmc_rescan_try_freq:1785 mmc1: sdio completed
<6>[ 9.162231] [mmc]:mmc_rescan:1897 mmc1: extend_wakelock 1
<4>[ 9.452007] [DHD] =========== WLAN placed in RESET ========
<6>[ 9.460044] rtc_tps6591x rtc_tps6591x.0: RTC Time : 1/20/2000 15:38:14
<6>[ 9.466699] rtc_tps6591x rtc_tps6591x.0: setting system clock to 2000-01-20 15:38:14 UTC (948382694)
<6>[ 9.476450] Freeing init memory: 232K
<3>[ 9.483133] init: /init.rc: 40: invalid option ' disabled'
<4>[ 9.499157] pad_get_psp val->intval=Full ret=e0
<4>[ 9.516425] pad_get_psp voltage_now =8222
<4>[ 9.523117] pad_get_capacity val->intval=100 ret=100
<4>[ 9.530984] pad_get_psp batttery temperature=214
<3>[ 9.538905] power_supply dock_battery: driver failed to report `status' property
<5>[ 10.537066] asuspec: [asuspec_enter_s3_work_function] EC in S3
<6>[ 12.070678] charger_pad_dock_detection:0 dock_in_value=1 charger_pad_dock_value =0
<5>[ 12.270718] asuspec: [asuspec_send_ec_req] send EC_Request
<4>[ 12.276358] battery_status_poll 120 1
<5>[ 12.344354] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 12.350417] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 12.543902] pad_get_psp val->intval=Full ret=e0
<4>[ 12.561136] pad_get_psp voltage_now =8236
<4>[ 12.568054] pad_get_capacity val->intval=100 ret=100
<4>[ 12.576090] pad_get_psp batttery temperature=214
<5>[ 13.577972] asuspec: [asuspec_enter_s3_work_function] EC in S3
<4>[ 13.960684] tegra_watchdog_touch
<4>[ 13.964553] nct1008_get_temp: ret temp=27C
<4>[ 13.969061] Reg Status Reg 0x02 Value 0x80
<4>[ 13.974726] Reg Configuration Reg 0x03 Value 0x04
<3>[ 14.015807] init: Unable to open persistent property directory /data/property errno: 2
<3>[ 14.026231] android_usb: already disabled
<6>[ 14.029719] warning: `adbd' uses 32-bit capabilities (legacy support in use)
<6>[ 14.029857] adb_open(adbd)
<6>[ 14.040886] adb_bind_config
<3>[ 14.041028] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
<6>[ 14.041331] adb_bind_config
<6>[ 14.041375] adb_release
<6>[ 14.042658] adb_open(adbd)
<4>[ 14.077748] Check cardhu_panel_disable in TF202
<6>[ 14.186501] android_work: did not send uevent (0 0 (null))
<4>[ 14.201093] Disp: diff_msec= 123
<6>[ 14.343013] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 14.346658] android_work: sent uevent USB_STATE=DISCONNECTED
<6>[ 14.544938] android_work: sent uevent USB_STATE=CONNECTED
<4>[ 15.090773] Check cardhu_panel_enable
<4>[ 15.090782] Check panel is panasonic
<4>[ 15.120686] Check power on/off for bridge IC
<4>[ 15.120693] Check enable TF301_1.8V
<4>[ 15.130708] Check enable TF301_I2C_Switch
<4>[ 15.140724] Check enable TF301_OSC
<4>[ 15.161105] Check tegra_dc_rgb_enable
<4>[ 15.161111] Check set polarity
<4>[ 15.161815] Check Chip ID=44
<4>[ 15.161819] Check RevID=0
<6>[ 15.161824] DISPLAY_write_table display_write_table
<4>[ 15.235429] ========================
<4>[ 15.235434] ========================
<4>[ 15.235439] Check start to read register
<4>[ 15.235444] Panel is panasonic
<6>[ 15.919934] set_config : usb set config wake lock ++
<6>[ 15.925263] android_usb gadget: high speed config #1: android
<6>[ 15.931323] android_work: sent uevent USB_STATE=CONFIGURED
<4>[ 18.980699] tegra_watchdog_touch
<4>[ 18.984603] nct1008_get_temp: ret temp=27C
<4>[ 18.989046] Reg Status Reg 0x02 Value 0x80
<4>[ 18.994716] Reg Configuration Reg 0x03 Value 0x04
<4>[ 20.275711] adbd (124): /proc/124/oom_adj is deprecated, please use /proc/124/oom_score_adj instead.
<4>[ 24.000697] tegra_watchdog_touch
<4>[ 24.004523] nct1008_get_temp: ret temp=27C
<4>[ 24.008970] Reg Status Reg 0x02 Value 0x80
<4>[ 24.014715] Reg Configuration Reg 0x03 Value 0x04
<4>[ 29.020714] tegra_watchdog_touch
<4>[ 29.024695] nct1008_get_temp: ret temp=27C
<4>[ 29.029142] Reg Status Reg 0x02 Value 0x80
<4>[ 29.034817] Reg Configuration Reg 0x03 Value 0x04
<4>[ 34.040701] tegra_watchdog_touch
<4>[ 34.044545] nct1008_get_temp: ret temp=27C
<4>[ 34.048991] Reg Status Reg 0x02 Value 0x80
<4>[ 34.054678] Reg Configuration Reg 0x03 Value 0x04
<4>[ 39.060694] tegra_watchdog_touch
<4>[ 39.064593] nct1008_get_temp: ret temp=27C
<4>[ 39.069044] Reg Status Reg 0x02 Value 0x80
<4>[ 39.074788] Reg Configuration Reg 0x03 Value 0x04
<4>[ 44.080698] tegra_watchdog_touch
<4>[ 44.084517] nct1008_get_temp: ret temp=28C
<4>[ 44.089027] Reg Status Reg 0x02 Value 0x80
<4>[ 44.094696] Reg Configuration Reg 0x03 Value 0x04
<4>[ 49.100696] tegra_watchdog_touch
<4>[ 49.104519] nct1008_get_temp: ret temp=28C
<4>[ 49.108954] Reg Status Reg 0x02 Value 0x80
<4>[ 49.114720] Reg Configuration Reg 0x03 Value 0x04
<4>[ 54.120690] tegra_watchdog_touch
<4>[ 54.124585] nct1008_get_temp: ret temp=28C
<4>[ 54.129018] Reg Status Reg 0x02 Value 0x00
<4>[ 54.134709] Reg Configuration Reg 0x03 Value 0x04
<4>[ 59.140691] tegra_watchdog_touch
<4>[ 59.144511] nct1008_get_temp: ret temp=28C
<4>[ 59.149021] Reg Status Reg 0x02 Value 0x80
<4>[ 59.154710] Reg Configuration Reg 0x03 Value 0x04
<4>[ 64.160705] tegra_watchdog_touch
<4>[ 64.164619] nct1008_get_temp: ret temp=28C
<4>[ 64.169057] Reg Status Reg 0x02 Value 0x80
<4>[ 64.174818] Reg Configuration Reg 0x03 Value 0x04
<4>[ 69.180702] tegra_watchdog_touch
<4>[ 69.184526] nct1008_get_temp: ret temp=28C
<4>[ 69.189034] Reg Status Reg 0x02 Value 0x00
<4>[ 69.194725] Reg Configuration Reg 0x03 Value 0x04
<4>[ 74.200693] tegra_watchdog_touch
<4>[ 74.204512] nct1008_get_temp: ret temp=28C
<4>[ 74.208948] Reg Status Reg 0x02 Value 0x80
<4>[ 74.214709] Reg Configuration Reg 0x03 Value 0x04
<4>[ 79.220694] tegra_watchdog_touch
<4>[ 79.224584] nct1008_get_temp: ret temp=28C
<4>[ 79.229018] Reg Status Reg 0x02 Value 0x80
<4>[ 79.234689] Reg Configuration Reg 0x03 Value 0x04
<4>[ 84.240690] tegra_watchdog_touch
<4>[ 84.244515] nct1008_get_temp: ret temp=28C
<4>[ 84.249021] Reg Status Reg 0x02 Value 0x80
<4>[ 84.254689] Reg Configuration Reg 0x03 Value 0x04
<4>[ 89.260686] tegra_watchdog_touch
<4>[ 89.264638] nct1008_get_temp: ret temp=28C
<4>[ 89.269080] Reg Status Reg 0x02 Value 0x80
<4>[ 89.274819] Reg Configuration Reg 0x03 Value 0x04
<4>[ 94.280705] tegra_watchdog_touch
<4>[ 94.284546] nct1008_get_temp: ret temp=28C
<4>[ 94.289055] Reg Status Reg 0x02 Value 0x80
<4>[ 94.294723] Reg Configuration Reg 0x03 Value 0x04
<4>[ 99.300695] tegra_watchdog_touch
<4>[ 99.304530] nct1008_get_temp: ret temp=28C
<4>[ 99.308965] Reg Status Reg 0x02 Value 0x80
<4>[ 99.314703] Reg Configuration Reg 0x03 Value 0x04
<4>[ 104.320698] tegra_watchdog_touch
<4>[ 104.324600] nct1008_get_temp: ret temp=29C
<4>[ 104.329036] Reg Status Reg 0x02 Value 0x80
<4>[ 104.334707] Reg Configuration Reg 0x03 Value 0x04
<4>[ 109.340700] tegra_watchdog_touch
<4>[ 109.344527] nct1008_get_temp: ret temp=29C
<4>[ 109.349033] Reg Status Reg 0x02 Value 0x80
<4>[ 109.354699] Reg Configuration Reg 0x03 Value 0x04
<4>[ 114.360693] tegra_watchdog_touch
<4>[ 114.364599] nct1008_get_temp: ret temp=29C
<4>[ 114.369034] Reg Status Reg 0x02 Value 0x00
<4>[ 114.374777] Reg Configuration Reg 0x03 Value 0x04
<4>[ 119.380693] tegra_watchdog_touch
<4>[ 119.384509] nct1008_get_temp: ret temp=29C
<4>[ 119.389021] Reg Status Reg 0x02 Value 0x80
<4>[ 119.394693] Reg Configuration Reg 0x03 Value 0x04
<4>[ 124.400916] tegra_watchdog_touch
<4>[ 124.404853] nct1008_get_temp: ret temp=29C
<4>[ 124.409357] Reg Status Reg 0x02 Value 0x80
<4>[ 124.415093] Reg Configuration Reg 0x03 Value 0x04
<4>[ 129.420692] tegra_watchdog_touch
<4>[ 129.424584] nct1008_get_temp: ret temp=29C
<4>[ 129.429032] Reg Status Reg 0x02 Value 0x80
<4>[ 129.434704] Reg Configuration Reg 0x03 Value 0x04
<5>[ 132.330755] asuspec: [asuspec_send_ec_req] send EC_Request
<4>[ 132.336326] battery_status_poll 120 1
<5>[ 132.401897] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 132.407886] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 132.603893] pad_get_psp val->intval=Full ret=e0
<4>[ 132.622667] pad_get_psp voltage_now =8221
<4>[ 132.629409] pad_get_capacity val->intval=100 ret=99
<4>[ 132.637320] pad_get_psp batttery temperature=226
<5>[ 133.636430] asuspec: [asuspec_enter_s3_work_function] EC in S3
<4>[ 134.440693] tegra_watchdog_touch
<4>[ 134.444513] nct1008_get_temp: ret temp=29C
<4>[ 134.448960] Reg Status Reg 0x02 Value 0x80
<4>[ 134.454703] Reg Configuration Reg 0x03 Value 0x04
<4>[ 139.460690] tegra_watchdog_touch
<4>[ 139.464642] nct1008_get_temp: ret temp=29C
<4>[ 139.469104] Reg Status Reg 0x02 Value 0x00
<4>[ 139.474843] Reg Configuration Reg 0x03 Value 0x04
<4>[ 144.480690] tegra_watchdog_touch
<4>[ 144.484514] nct1008_get_temp: ret temp=29C
<4>[ 144.489019] Reg Status Reg 0x02 Value 0x80
<4>[ 144.494693] Reg Configuration Reg 0x03 Value 0x04
<4>[ 149.500692] tegra_watchdog_touch
<4>[ 149.504510] nct1008_get_temp: ret temp=29C
<4>[ 149.508946] Reg Status Reg 0x02 Value 0x80
<4>[ 149.514703] Reg Configuration Reg 0x03 Value 0x04
<4>[ 154.520687] tegra_watchdog_touch
<4>[ 154.524617] nct1008_get_temp: ret temp=29C
<4>[ 154.529051] Reg Status Reg 0x02 Value 0x80
<4>[ 154.534736] Reg Configuration Reg 0x03 Value 0x04
<4>[ 159.540702] tegra_watchdog_touch
<4>[ 159.544536] nct1008_get_temp: ret temp=29C
<4>[ 159.548974] Reg Status Reg 0x02 Value 0x80
<4>[ 159.554740] Reg Configuration Reg 0x03 Value 0x04
<4>[ 164.560693] tegra_watchdog_touch
<4>[ 164.564581] nct1008_get_temp: ret temp=29C
<4>[ 164.569015] Reg Status Reg 0x02 Value 0x00
<4>[ 164.574779] Reg Configuration Reg 0x03 Value 0x04
<4>[ 169.580688] tegra_watchdog_touch
<4>[ 169.584549] nct1008_get_temp: ret temp=29C
<4>[ 169.589057] Reg Status Reg 0x02 Value 0x80
<4>[ 169.594742] Reg Configuration Reg 0x03 Value 0x04
<4>[ 174.600693] tegra_watchdog_touch
<4>[ 174.604512] nct1008_get_temp: ret temp=29C
<4>[ 174.608946] Reg Status Reg 0x02 Value 0x00
<4>[ 174.614712] Reg Configuration Reg 0x03 Value 0x04
<4>[ 179.620693] tegra_watchdog_touch
<4>[ 179.624583] nct1008_get_temp: ret temp=29C
<4>[ 179.629018] Reg Status Reg 0x02 Value 0x80
<4>[ 179.634682] Reg Configuration Reg 0x03 Value 0x04
<4>[ 184.640687] tegra_watchdog_touch
<4>[ 184.644574] nct1008_get_temp: ret temp=29C
<4>[ 184.649017] Reg Status Reg 0x02 Value 0x80
<4>[ 184.654760] Reg Configuration Reg 0x03 Value 0x04
<4>[ 189.660701] tegra_watchdog_touch
<4>[ 189.664592] nct1008_get_temp: ret temp=29C
<4>[ 189.669027] Reg Status Reg 0x02 Value 0x80
<4>[ 189.674773] Reg Configuration Reg 0x03 Value 0x04
<4>[ 194.680693] tegra_watchdog_touch
<4>[ 194.684510] nct1008_get_temp: ret temp=29C
<4>[ 194.689016] Reg Status Reg 0x02 Value 0x80
<4>[ 194.694688] Reg Configuration Reg 0x03 Value 0x04
<4>[ 199.700689] tegra_watchdog_touch
<4>[ 199.704596] nct1008_get_temp: ret temp=29C
<4>[ 199.709039] Reg Status Reg 0x02 Value 0x80
<4>[ 199.714785] Reg Configuration Reg 0x03 Value 0x04
<4>[ 204.720696] tegra_watchdog_touch
<4>[ 204.724594] nct1008_get_temp: ret temp=30C
<4>[ 204.729030] Reg Status Reg 0x02 Value 0x80
<4>[ 204.734696] Reg Configuration Reg 0x03 Value 0x04
<4>[ 209.740695] tegra_watchdog_touch
<4>[ 209.744521] nct1008_get_temp: ret temp=30C
<4>[ 209.748956] Reg Status Reg 0x02 Value 0x80
<4>[ 209.754701] Reg Configuration Reg 0x03 Value 0x04
<4>[ 214.760691] tegra_watchdog_touch
<4>[ 214.764675] nct1008_get_temp: ret temp=30C
<4>[ 214.769116] Reg Status Reg 0x02 Value 0x80
<4>[ 214.774855] Reg Configuration Reg 0x03 Value 0x04
<4>[ 219.780703] tegra_watchdog_touch
<4>[ 219.784523] nct1008_get_temp: ret temp=30C
<4>[ 219.789035] Reg Status Reg 0x02 Value 0x80
<4>[ 219.794703] Reg Configuration Reg 0x03 Value 0x04
<4>[ 224.800693] tegra_watchdog_touch
<4>[ 224.804508] nct1008_get_temp: ret temp=30C
<4>[ 224.808950] Reg Status Reg 0x02 Value 0x80
<4>[ 224.814694] Reg Configuration Reg 0x03 Value 0x04
<4>[ 229.820764] tegra_watchdog_touch
<4>[ 229.824698] nct1008_get_temp: ret temp=30C
<4>[ 229.829153] Reg Status Reg 0x02 Value 0x00
<4>[ 229.834818] Reg Configuration Reg 0x03 Value 0x04
<4>[ 234.840698] tegra_watchdog_touch
<4>[ 234.844517] nct1008_get_temp: ret temp=30C
<4>[ 234.848962] Reg Status Reg 0x02 Value 0x80
<4>[ 234.854635] Reg Configuration Reg 0x03 Value 0x04
<4>[ 239.860691] tegra_watchdog_touch
<4>[ 239.864580] nct1008_get_temp: ret temp=30C
<4>[ 239.869023] Reg Status Reg 0x02 Value 0x00
<4>[ 239.874766] Reg Configuration Reg 0x03 Value 0x04
<3>[ 240.640722] INFO: task kinteractiveup:81 blocked for more than 120 seconds.
<3>[ 240.647828] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 240.655736] kinteractiveup D c0571c3c 0 81 2 0x00000000
<4>[ 240.662465] [<c0571c3c>] (schedule+0x87c/0x958) from [<c00a480c>] (kthread+0x64/0x84)
<4>[ 240.670481] [<c00a480c>] (kthread+0x64/0x84) from [<c00482b8>] (kernel_thread_exit+0x0/0x8)
_that said:
Also try this:
Code:
adb shell hexdump -C -s 0x380000 -n 8 /dev/block/mmcblk0
and tell me if it outputs "ANDROID!" (after some hexadecimal numbers).
Click to expand...
Click to collapse
No, it only outputs:
*
00380000

How to Install official miui v4 stable Rom on Desire S

I followed below steps for installing official miui v4 rom to desire s
1. Download official miui v4 stable rom from www.miui.com
2. Format sd card and system (clean format).
3. Hboot is 7.0
4. Installed official chinese sense 3.6 rom and reboot the phone to recovery.
5. factory reset and wipe cache & delvic cache.
My problem is while installing miui v4 3.2.22 stable official version...my installation aborted saying
updating package....
formatting system.......
do not format system.............
installed successfully....
Post reboot HTC splash screen appears for a while and then phone reboots on its own to recovery.
Please help...
talktoraj83 said:
I followed below steps for installing official miui v4 rom to desire s
1. Download official miui v4 stable rom from www.miui.com
2. Format sd card and system (clean format).
3. Hboot is 7.0
4. Installed official chinese sense 3.6 rom and reboot the phone to recovery.
5. factory reset and wipe cache & delvic cache.
My problem is while installing miui v4 3.2.22 stable official version...my installation aborted saying
updating package....
formatting system.......
do not format system.............
installed successfully....
Post reboot HTC splash screen appears for a while and then phone reboots on its own to recovery.
Please help...
Click to expand...
Click to collapse
Flash the boot.img from the ROM.zip through cmd on your PC.
NVardan said:
Flash the boot.img from the ROM.zip through cmd on your PC.
Click to expand...
Click to collapse
But he's on hboot 7.xxx
Shouldn't he be alrd s-off. Op do tell us if you're s-on or off.
Get 4ext. I think there's an image file that u can flash in fastboot mode. Search dev section for the thread.
Wipe everything (except sdcard)
Flash ROM
Reboot into rom
*flash gapps after set up.
FromBeyondThisWorld
#Fear said:
But he's on hboot 7.xxx
Shouldn't he be alrd s-off. Op do tell us if you're s-on or off.
Get 4ext. I think there's an image file that u can flash in fastboot mode. Search dev section for the thread.
Wipe everything (except sdcard)
Flash ROM
Reboot into rom
*flash gapps after set up.
FromBeyondThisWorld
Click to expand...
Click to collapse
You're right. That makes sense. HBOOT 7.xxx is already S-Off (I'm on this hboot too, I didn't notice ). :silly:
#Fear said:
But he's on hboot 7.xxx
Shouldn't he be alrd s-off. Op do tell us if you're s-on or off.
Get 4ext. I think there's an image file that u can flash in fastboot mode. Search dev section for the thread.
Wipe everything (except sdcard)
Flash ROM
Reboot into rom
*flash gapps after set up.
FromBeyondThisWorld
Click to expand...
Click to collapse
Ya my phone is s-off....and had pushed boot.img successfully bufore and after installation of rom.zip file but still same problem..
I think m missing some step....that is specific for flashing miui v4 official rom for desire s
What recovery is on your device? Try using 4ext :thumbup:
1.full wipe(except sdcard)
2.flash rom
3.reboot
Don't flash gapps first and see if it boots.
FromBeyondThisWorld
#Fear said:
What recovery is on your device? Try using 4ext :thumbup:
1.full wipe(except sdcard)
2.flash rom
3.reboot
Don't flash gapps first and see if it boots.
FromBeyondThisWorld
Click to expand...
Click to collapse
No its not booting..i have tried all permutation & combination....
on latest 4ext recovery
talktoraj83 said:
No its not booting..i have tried all permutation & combination....
on latest 4ext recovery
Click to expand...
Click to collapse
There is one hint if it could help some one to find out issue with my installation...
When m trying below patch for formatting my phone gives error..
http://www.androidfilehost.com/?fid=9390189810980749321
talktoraj83 said:
There is one hint if it could help some one to find out issue with my installation...
When m trying below patch for formatting my phone gives error..
http://www.androidfilehost.com/?fid=9390189810980749321
Click to expand...
Click to collapse
This guy had bootloop too when he tried, but he was trying the russian version. He solve it with amidabuddha kernel.
Cheers
#Fear said:
This guy had bootloop too when he tried, but he was trying the russian version. He solve it with amidabuddha kernel.
Cheers
Click to expand...
Click to collapse
Can you confirm that miuiv4 official version rom has kernel inside it or not?
talktoraj83 said:
Can you confirm that miuiv4 official version rom has kernel inside it or not?
Click to expand...
Click to collapse
Just look inside the zip and you`ll know....
Flashing another kernel wouldn`t harm,
if your device isn`t booting anyway...
take a logcat and attach it and/or look inside,
then all`ll become clear...
asgardr said:
Just look inside the zip and you`ll know....
Flashing another kernel wouldn`t harm,
if your device isn`t booting anyway...
take a logcat and attach it and/or look inside,
then all`ll become clear...
Click to expand...
Click to collapse
Please find below logcat-
10.554687] init: untracked pid 1288 exited
<6>[ 10.666137] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts:
<3>[ 10.779083] EXT3-fs (mmcblk0p25): error: couldn't mount because of unsupported optional features (40)
<3>[ 10.779937] EXT2-fs (mmcblk0p25): error: couldn't mount because of unsupported optional features (40)
<6>[ 10.828582] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: (null)
<3>[ 10.829498] init: untracked pid 1309 exited
<6>[ 11.487731] pm8058_led_currents_store: bank 6 currents 1
<6>[ 11.487976] pm8058_drvx_led_brightness_set: bank 6 brightness 0
<6>[ 11.488128] pm8058_drvx_led_brightness_set: bank 6 brightness 255
<6>[ 11.488708] pm8058_led_currents_store: bank 6 currents 9
<6>[ 11.488830] pm8058_drvx_led_brightness_set: bank 6 brightness 0
<6>[ 11.489074] pm8058_drvx_led_brightness_set: bank 6 brightness 255
<6>[ 11.490509] pm8058_drvx_led_brightness_set: bank 6 brightness 9
<6>[ 11.491119] pm8058_drvx_led_brightness_set: bank 6 brightness 90
<6>[ 11.491638] pm8058_drvx_led_brightness_set: bank 6 brightness 9
<6>[ 11.492218] pm8058_drvx_led_brightness_set: bank 6 brightness 90
<3>[ 11.875061] init: untracked pid 1343 exited
<6>[ 17.498992] [email protected],236
<6>[ 17.559783] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 17.561279] [ATS][set_vibration][successful]
<6>[ 17.584899] [VIB]vibrator_timer_func
<6>[ 17.663330] [email protected],236
<6>[ 25.172546] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 25.173919] [ATS][set_vibration][successful]
<6>[ 25.197753] [VIB]vibrator_timer_func
<6>[ 34.992889] [BATT] M2A_RPC: set_charging: 0 at 29234003670 (2013-08-30 18:23:52.340426829 UTC)
<6>[ 34.993194] Switch charger OFF
<6>[ 34.994964] [BATT] M2A_RPC: set_charging: 1 at 29236046353 (2013-08-30 18:23:52.342500000 UTC)
<6>[ 34.995269] Switch charger ON (SLOW)
<6>[ 34.996215] batt: Switch charger ON (SLOW): regh 0x03=83
<6>[ 34.997314] [BATT] M2A_RPC: cable_update: USB at 29238332939 (2013-08-30 18:23:52.344847561 UTC)
<6>[ 34.997619] [BATT] htc_cable_status_update: 0 -> 1
<6>[ 34.997741] [USB] msm_hsusb_set_vbus_state: 1
<6>[ 34.997924] [USB] hsusb: OFFLINE -> ONLINE
<6>[ 34.998016] [USB] lpm exit
<6>[ 34.999298] [USB] hsusb: reset controller
<6>[ 35.044311] msm_hsusb_phy_reset
<6>[ 35.189300] [USB] ulpi: write 0x06 to 0x36
<6>[ 35.189392] [USB] ulpi: write 0x0c to 0x31
<6>[ 35.189605] [USB] ulpi: write 0x31 to 0x32
<6>[ 35.189697] [USB] ulpi: write 0x01 to 0x0d
<6>[ 35.189788] [USB] ulpi: write 0x01 to 0x10
<6>[ 35.189971] [USB] handle_notify_offline: notify offline
<6>[ 35.190093] [USB] msm_hsusb: enable pullup
<6>[ 35.193206] [USB] suspend
<6>[ 35.209381] [USB] not AC charger
<6>[ 35.293640] [USB] reset
<6>[ 35.293731] [USB] send connect type 1
<6>[ 35.293853] Touch: cable change to 1
<6>[ 35.295227] fsg_set_ums_state: 1
<6>[ 35.295349] ums: set state 1
<6>[ 35.295745] [BATT] online=1
<6>[ 35.295928] [USB] portchange USB_SPEED_HIGH
<6>[ 35.296112] [BATT] Update SMEM: cable type 1 at 29536839037 (2013-08-30 18:23:52.643353659 UTC)
<6>[ 35.338897] pm8058_pwm_led_brightness_set: bank 0 brightness 0
<6>[ 35.345031] pm8058_pwm_led_brightness_set: bank 1 brightness 1
<6>[ 35.351470] pm8058_pwm_led_brightness_set: bank 0 brightness 0
<6>[ 35.357391] pm8058_pwm_led_brightness_set: bank 1 brightness 1
<6>[ 35.484069] android_usb gadget: high speed config #1: android
<6>[ 35.484222] adb_function_set_alt: maxsize = 512
<6>[ 35.484497] ums: set state 1
<6>[ 66.039398] Release 'boot-time' perf_lock
<6>[ 66.620391] Release 'boot-time' no_halt_lock
<6>[ 67.040405] perflock_notifier_call: cpufreq recover policy 245760 1024000
<6>[ 246.697113] [BATT] M2A_RPC: level_update: 68 at 240732143916 (2013-08-30 18:27:23.838079269 UTC)
<6>[ 246.698181] [BATT] power_supply_changed: battery at 240732906111 (2013-08-30 18:27:23.839176830 UTC)
<6>[ 246.718322] pm8058_pwm_led_brightness_set: bank 0 brightness 0
<6>[ 246.737548] pm8058_pwm_led_brightness_set: bank 1 brightness 1
<3>[ 246.935974] INFO: task audio_mvs:428 blocked for more than 120 seconds.
<3>[ 246.936370] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 246.937011] audio_mvs D c0425f80 0 428 2 0x00000000
<4>[ 246.938323] Backtrace:
<4>[ 246.939056] [<c0425bbc>] (schedule+0x0/0x450) from [<c005101c>] (__msm_rpc_read+0x22c/0xa4c)
<4>[ 246.939758] [<c0050df0>] (__msm_rpc_read+0x0/0xa4c) from [<c0051858>] (msm_rpc_read+0x1c/0x88)
<4>[ 246.940185] [<c005183c>] (msm_rpc_read+0x0/0x88) from [<c0074f34>] (audio_mvs_thread+0x4c/0x164)
<4>[ 246.940856] r6:00000000 r5:c7e69f9c r4:c05ef368
<4>[ 246.942596] [<c0074ee8>] (audio_mvs_thread+0x0/0x164) from [<c00b1f28>] (kthread+0x84/0x8c)
<4>[ 246.942962] r8:00000000 r7:c05ef368 r6:c0074ee8 r5:c7e69fcc r4:c7c1df48
<4>[ 246.945312] [<c00b1ea4>] (kthread+0x0/0x8c) from [<c009e9a0>] (do_exit+0x0/0x6ac)
<4>[ 246.946044] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c1df48
<3>[ 246.947753] INFO: task krmt_storagecln:460 blocked for more than 120 seconds.
<3>[ 246.948425] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 246.948791] krmt_storagecln D c0425f80 0 460 2 0x00000000
<4>[ 246.950073] Backtrace:
<4>[ 246.950805] [<c0425bbc>] (schedule+0x0/0x450) from [<c004a1c4>] (rpc_clients_cb_thread+0x98/0x1b0)
<4>[ 246.951507] [<c004a12c>] (rpc_clients_cb_thread+0x0/0x1b0) from [<c00b1f28>] (kthread+0x84/0x8c)
<4>[ 246.952239] [<c00b1ea4>] (kthread+0x0/0x8c) from [<c009e9a0>] (do_exit+0x0/0x6ac)
<4>[ 246.952606] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c1ddf8
<3>[ 246.954620] INFO: task voice:740 blocked for more than 120 seconds.
<3>[ 246.955261] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 246.955657] voice D c0425f80 0 740 2 0x00000000
<4>[ 246.957031] Backtrace:
<4>[ 246.957763] [<c0425bbc>] (schedule+0x0/0x450) from [<c04266e8>] (schedule_timeout+0x24/0x23c)
<4>[ 246.958465] [<c04266c4>] (schedule_timeout+0x0/0x23c) from [<c04264e0>] (wait_for_common+0x12c/0x1f0)
<4>[ 246.959136] r7:c76f2000 r6:00000002 r5:c05eaf44 r4:7fffffff
<4>[ 246.960876] [<c04263b4>] (wait_for_common+0x0/0x1f0) from [<c0426684>] (wait_for_completion+0x1c/0x20)
<4>[ 246.961578] [<c0426668>] (wait_for_completion+0x0/0x20) from [<c005a38c>] (voice_thread+0x6c/0x554)
<4>[ 246.962280] [<c005a320>] (voice_thread+0x0/0x554) from [<c00b1f28>] (kthread+0x84/0x8c)
<4>[ 246.962707] [<c00b1ea4>] (kthread+0x0/0x8c) from [<c009e9a0>] (do_exit+0x0/0x6ac)
<4>[ 246.963378] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c1df30
<3>[ 367.073181] INFO: task rpcrouter:274 blocked for more than 120 seconds.
<3>[ 367.073547] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 367.074249] rpcrouter D c0425f80 0 274 2 0x00000000
<4>[ 367.075286] Backtrace:
<4>[ 367.076354] [<c0425bbc>] (schedule+0x0/0x450) from [<c004f748>] (rr_read+0x178/0x1a4)
<4>[ 367.076751] [<c004f5d0>] (rr_read+0x0/0x1a4) from [<c004f900>] (do_read_data+0x1c/0xa08)
<4>[ 367.077453] [<c004f8e4>] (do_read_data+0x0/0xa08) from [<c00ae168>] (worker_thread+0x18c/0x238)
<4>[ 367.078186] [<c00adfdc>] (worker_thread+0x0/0x238) from [<c00b1f28>] (kthread+0x84/0x8c)
<4>[ 367.078887] [<c00b1ea4>] (kthread+0x0/0x8c) from [<c009e9a0>] (do_exit+0x0/0x6ac)
<4>[ 367.079284] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c2bd70
<3>[ 367.081268] INFO: task audio_mvs:428 blocked for more than 120 seconds.
<3>[ 367.081634] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 367.082305] audio_mvs D c0425f80 0 428 2 0x00000000
<4>[ 367.083679] Backtrace:
<4>[ 367.084381] [<c0425bbc>] (schedule+0x0/0x450) from [<c005101c>] (__msm_rpc_read+0x22c/0xa4c)
<4>[ 367.085052] [<c0050df0>] (__msm_rpc_read+0x0/0xa4c) from [<c0051858>] (msm_rpc_read+0x1c/0x88)
<4>[ 367.085479] [<c005183c>] (msm_rpc_read+0x0/0x88) from [<c0074f34>] (audio_mvs_thread+0x4c/0x164)
<4>[ 367.086151] r6:00000000 r5:c7e69f9c r4:c05ef368
<4>[ 367.087554] [<c0074ee8>] (audio_mvs_thread+0x0/0x164) from [<c00b1f28>] (kthread+0x84/0x8c)
<4>[ 367.088195] r8:00000000 r7:c05ef368 r6:c0074ee8 r5:c7e69fcc r4:c7c1df48
<4>[ 367.090545] [<c00b1ea4>] (kthread+0x0/0x8c) from [<c009e9a0>] (do_exit+0x0/0x6ac)
<4>[ 367.090911] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c1df48
<3>[ 367.092895] INFO: task krmt_storagecln:460 blocked for more than 120 seconds.
<3>[ 367.093627] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 367.093994] krmt_storagecln D c0425f80 0 460 2 0x00000000
<4>[ 367.095336] Backtrace:
<4>[ 367.096038] [<c0425bbc>] (schedule+0x0/0x450) from [<c004a1c4>] (rpc_clients_cb_thread+0x98/0x1b0)
<4>[ 367.096771] [<c004a12c>] (rpc_clients_cb_thread+0x0/0x1b0) from [<c00b1f28>] (kthread+0x84/0x8c)
<4>[ 367.097442] [<c00b1ea4>] (kthread+0x0/0x8c) from [<c009e9a0>] (do_exit+0x0/0x6ac)
<4>[ 367.097808] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c1ddf8
<3>[ 367.099822] INFO: task voice:740 blocked for more than 120 seconds.
<3>[ 367.100189] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 367.100860] voice D c0425f80 0 740 2 0x00000000
<4>[ 367.102203] Backtrace:
<4>[ 367.102905] [<c0425bbc>] (schedule+0x0/0x450) from [<c04266e8>] (schedule_timeout+0x24/0x23c)
<4>[ 367.103637] [<c04266c4>] (schedule_timeout+0x0/0x23c) from [<c04264e0>] (wait_for_common+0x12c/0x1f0)
<4>[ 367.104034] r7:c76f2000 r6:00000002 r5:c05eaf44 r4:7fffffff
<4>[ 367.106018] [<c04263b4>] (wait_for_common+0x0/0x1f0) from [<c0426684>] (wait_for_completion+0x1c/0x20)
<4>[ 367.106750] [<c0426668>] (wait_for_completion+0x0/0x20) from [<c005a38c>] (voice_thread+0x6c/0x554)
<4>[ 367.107452] [<c005a320>] (voice_thread+0x0/0x554) from [<c00b1f28>] (kthread+0x84/0x8c)
<4>[ 367.107849] [<c00b1ea4>] (kthread+0x0/0x8c) from [<c009e9a0>] (do_exit+0x0/0x6ac)
<4>[ 367.108520] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c1df30
<6>[ 486.697143] [BATT] M2A_RPC: level_update: 69 at 480497997575 (2013-08-30 18:31:23.603963416 UTC)
<6>[ 486.699218] [BATT] power_supply_changed: battery at 480500162209 (2013-08-30 18:31:23.606036587 UTC)
<6>[ 486.718139] pm8058_pwm_led_brightness_set: bank 0 brightness 0
<6>[ 486.737762] pm8058_pwm_led_brightness_set: bank 1 brightness 1
<3>[ 487.220397] INFO: task audio_mvs:428 blocked for more than 120 seconds.
<3>[ 487.221069] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 487.221466] audio_mvs D c0425f80 0 428 2 0x00000000
<4>[ 487.222778] Backtrace:
<4>[ 487.223541] [<c0425bbc>] (schedule+0x0/0x450) from [<c005101c>] (__msm_rpc_read+0x22c/0xa4c)
<4>[ 487.224243] [<c0050df0>] (__msm_rpc_read+0x0/0xa4c) from [<c0051858>] (msm_rpc_read+0x1c/0x88)
<4>[ 487.224945] [<c005183c>] (msm_rpc_read+0x0/0x88) from [<c0074f34>] (audio_mvs_thread+0x4c/0x164)
<4>[ 487.225341] r6:00000000 r5:c7e69f9c r4:c05ef368
<4>[ 487.227020] [<c0074ee8>] (audio_mvs_thread+0x0/0x164) from [<c00b1f28>] (kthread+0x84/0x8c)
<4>[ 487.227691] r8:00000000 r7:c05ef368 r6:c0074ee8 r5:c7e69fcc r4:c7c1df48
<4>[ 487.229736] [<c00b1ea4>] (kthread+0x0/0x8c) from [<c009e9a0>] (do_exit+0x0/0x6ac)
<4>[ 487.230468] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c1df48
<3>[ 487.232208] INFO: task krmt_storagecln:460 blocked for more than 120 seconds.
<3>[ 487.232879] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 487.233551] krmt_storagecln D c0425f80 0 460 2 0x00000000
<4>[ 487.234588] Backtrace:
<4>[ 487.235290] [<c0425bbc>] (schedule+0x0/0x450) from [<c004a1c4>] (rpc_clients_cb_thread+0x98/0x1b0)
<4>[ 487.235992] [<c004a12c>] (rpc_clients_cb_thread+0x0/0x1b0) from [<c00b1f28>] (kthread+0x84/0x8c)
<4>[ 487.236694] [<c00b1ea4>] (kthread+0x0/0x8c) from [<c009e9a0>] (do_exit+0x0/0x6ac)
<4>[ 487.237365] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c1ddf8
<3>[ 487.239044] INFO: task voice:740 blocked for more than 120 seconds.
<3>[ 487.239715] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 487.240081] voice D c0425f80 0 740 2 0x00000000
<4>[ 487.241485] Backtrace:
<4>[ 487.242187] [<c0425bbc>] (schedule+0x0/0x450) from [<c04266e8>] (schedule_timeout+0x24/0x23c)
<4>[ 487.242889] [<c04266c4>] (schedule_timeout+0x0/0x23c) from [<c04264e0>] (wait_for_common+0x12c/0x1f0)
<4>[ 487.243560] r7:c76f2000 r6:00000002 r5:c05eaf44 r4:7fffffff
<4>[ 487.245269] [<c04263b4>] (wait_for_common+0x0/0x1f0) from [<c0426684>] (wait_for_completion+0x1c/0x20)
<4>[ 487.245971] [<c0426668>] (wait_for_completion+0x0/0x20) from [<c005a38c>] (voice_thread+0x6c/0x554)
<4>[ 487.246673] [<c005a320>] (voice_thread+0x0/0x554) from [<c00b1f28>] (kthread+0x84/0x8c)
<4>[ 487.247375] [<c00b1ea4>] (kthread+0x0/0x8c) from [<c009e9a0>] (do_exit+0x0/0x6ac)
<4>[ 487.247772] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c1df30
<6>[ 491.649566] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 491.650665] [ATS][set_vibration][successful]
<6>[ 491.674682] [VIB]vibrator_timer_func
<6>[ 492.960632] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 492.961486] [ATS][set_vibration][successful]
<6>[ 492.985748] [VIB]vibrator_timer_func
<6>[ 494.228454] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 494.229370] [ATS][set_vibration][successful]
<6>[ 494.253662] [VIB]vibrator_timer_func
<6>[ 494.353851] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
<6>[ 505.722808] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts:
<6>[ 507.874176] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 507.875091] [ATS][set_vibration][successful]
<6>[ 507.899688] [VIB]vibrator_timer_func
<6>[ 510.369537] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 510.370391] [ATS][set_vibration][successful]
<6>[ 510.394653] [VIB]vibrator_timer_func
<6>[ 512.736968] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 512.738128] [ATS][set_vibration][successful]
<6>[ 512.762573] [VIB]vibrator_timer_func
<6>[ 514.352325] Touch: calibration confirm
<6>[ 514.373626] Touch Status: 0x01 0x10 0x77 0xA1 0x0A
<6>[ 514.381561] Touch Status: 0x01 0x00 0x77 0xA1 0x0A
<6>[ 514.776885] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 514.777862] [ATS][set_vibration][successful]
<6>[ 514.802093] [VIB]vibrator_timer_func
<6>[ 519.868621] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 519.869506] [ATS][set_vibration][successful]
<6>[ 519.893737] [VIB]vibrator_timer_func
<6>[ 522.455322] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 522.456207] [ATS][set_vibration][successful]
<6>[ 522.480499] [VIB]vibrator_timer_func
<6>[ 523.943817] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 523.944732] [ATS][set_vibration][successful]
<6>[ 523.969024] [VIB]vibrator_timer_func
<6>[ 529.148071] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 529.149322] [ATS][set_vibration][successful]
<6>[ 529.173309] [VIB]vibrator_timer_func
<6>[ 536.841979] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 536.843017] [ATS][set_vibration][successful]
<6>[ 536.867218] [VIB]vibrator_timer_func
<6>[ 543.078704] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 543.079650] [ATS][set_vibration][successful]
<6>[ 543.103851] [VIB]vibrator_timer_func
<6>[ 546.098419] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 546.099304] [ATS][set_vibration][successful]
<6>[ 546.123565] [VIB]vibrator_timer_func
<6>[ 547.273925] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 547.274871] [ATS][set_vibration][successful]
<6>[ 547.299133] [VIB]vibrator_timer_func
<6>[ 549.013427] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 549.014587] [ATS][set_vibration][successful]
<6>[ 549.038635] [VIB]vibrator_timer_func
<6>[ 550.455963] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 550.456909] [ATS][set_vibration][successful]
<6>[ 550.481201] [VIB]vibrator_timer_func
<6>[ 551.694274] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 551.695129] [ATS][set_vibration][successful]
<6>[ 551.719390] [VIB]vibrator_timer_func
<6>[ 562.994323] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 562.995758] [ATS][set_vibration][successful]
<6>[ 563.019470] [VIB]vibrator_timer_func
<6>[ 569.194122] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 569.195098] [ATS][set_vibration][successful]
<6>[ 569.219329] [VIB]vibrator_timer_func
<6>[ 569.385711] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
<3>[ 569.644683] tc: version magic '2.6.35.10 preempt mod_unload ARMv7 ' should be '2.6.35.10-g13f6602 preempt mod_unload ARMv7 '
<6>[ 572.967926] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
<3>[ 573.057800] EXT3-fs (mmcblk0p28): error: couldn't mount because of unsupported optional features (40)
<3>[ 573.058654] EXT2-fs (mmcblk0p28): error: couldn't mount because of unsupported optional features (40)
<6>[ 573.118988] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts: (null)
<3>[ 573.575347] EXT3-fs (mmcblk0p29): error: couldn't mount because of unsupported optional features (240)
<3>[ 573.576202] EXT2-fs (mmcblk0p29): error: couldn't mount because of unsupported optional features (240)
<4>[ 573.578399] EXT4-fs (mmcblk0p29): warning: checktime reached, running e2fsck is recommended
<6>[ 573.636688] EXT4-fs (mmcblk0p29): mounted filesystem without journal. Opts: (null)
<6>[ 606.694824] [BATT] M2A_RPC: set_charging: 100 at 600378089037 (2013-08-30 18:33:23.484603659 UTC)
<6>[ 606.695129] Switch charger CHECK
<6>[ 606.695495] TPS65200 STATUS_A27
I´m to late... But extract attached folder and push the folder in the ROM.zip ...
It´s a fix
Some lines are wrong in updater-script

Categories

Resources