[PLEASE HELP] I screwed up my phone! - General Questions and Answers

It was all well, until my battery died. Now I can't boot into (Philz touch) recovery, bootloader or anything except the system. When I boot into the system with my charger plugged it it says "Upgrading OS... (app name) " and then "Starting apps" and it just hangs there until the battery completely dies (with the charges plugged it) and the phone resets. When I plug the phone in while it's off it just turns back on and everything happends again.
How do I fix this? My gues is that I have to charge the battery without the phone turning on, so I do it somehow while it's out the phone?
Coolpad F1 (Micromax Canvas Nitro A310 is the same phone)
AICP rom 5.1.1 Lollipop
Philz Tocuh recovery (newest version, can't remember number)

Means that you have been using a rooted device with no problem and suddenly your battery got damaged.
Well i do not think so.
You have tried to change some system.and turned out to this.
Tell exactly what have you done beforebthat happened

droid_god said:
Means that you have been using a rooted device with no problem and suddenly your battery got damaged.
Well i do not think so.
You have tried to change some system.and turned out to this.
Tell exactly what have you done beforebthat happened
Click to expand...
Click to collapse
I fixed my phone. It had just too low battery to boot so I cut the USB cable and charged the battery with wires inside

Related

Need help on my LG P500 - Semi-Bricked.

Hey all , Look I've been looking around the forums looking and following solutions..
At first my P500 started to get no service.
Than the phone got really hot, Than left it on charge over-night because the battery was draining heaps !
(Found out the battery went dead. got a new battery etc)
Woke up , and my phone was repeatedly displaying the "LG" logo.
It'll idle on that for about 3 seconds, than restart and it'd come up again.
I cannot access recovery mode or any other mode, BUT only emergency mode.
I flashed the 10A firmware on my p500 , worked fine, than installed Facebook, Than it turned off again and is currently doing the same "LG LOGO"
thing.
I have tried and tried repeatedly to reflash the firmware again (USING KDZ)
Is there any hope i can get my phone up and running? thanks guys.
LayALAD said:
Hey all , Look I've been looking around the forums looking and following solutions..
At first my P500 started to get no service.
Than the phone got really hot, Than left it on charge over-night because the battery was draining heaps !
(Found out the battery went dead. got a new battery etc)
Woke up , and my phone was repeatedly displaying the "LG" logo.
It'll idle on that for about 3 seconds, than restart and it'd come up again.
I cannot access recovery mode or any other mode, BUT only emergency mode.
I flashed the 10A firmware on my p500 , worked fine, than installed Facebook, Than it turned off again and is currently doing the same "LG LOGO"
thing.
I have tried and tried repeatedly to reflash the firmware again (USING KDZ)
Is there any hope i can get my phone up and running? thanks guys.
Click to expand...
Click to collapse
Using KDZ is dangerous. Word of advice: NEVER EVER INTERRUPT THE FLASH OR TAJE OUT THE BATTERY. Use lgdmp if you have to reflash.
Sent from my LG-P690 using xda premium
Will i be able to flash it using "emergency mode" ?
edit: Flashed, But still constant "lg logo"
Nevermind that, Checked the ERASE EFS ALL Option, Phone is now charging and past the Lg logo !
But restarts sometimes, and constantly has the lg logo when i remove the usb cable.
LayALAD said:
Nevermind that, Checked the ERASE EFS ALL Option, Phone is now charging and past the Lg logo !
But restarts sometimes, and constantly has the lg logo when i remove the usb cable.
Click to expand...
Click to collapse
Are you able to boot your phone into system? Which ROM, kernel and baseband you are using?
rishabhgangwar said:
Are you able to boot your phone into system? Which ROM, kernel and baseband you are using?
Click to expand...
Click to collapse
The phone will not turn on without it plugged into power.
I turn on wifi.. Instant turn off.
I cannot get past the android logo now, leaving it on to charge over-night (charges fine)
It aint the battery (got 2)
The android sound plays than turns off,
Anything i should do before the next step?
I flashed the stock virgin mobile australia v20E firmware.
Kernel is 2.6.35.10-perf (managed to reflash it to boot it up again)
/bump.

[Q] My phone is dead...Help Required

Hello All,
I was putting custom Rom CM11 to my system. I tried installing but it was stuck in Boot loop. Now it ran out of battery. Now it does not start. When I try to charge it get struck at M logo. I am not able to go to bootloader or recovery. Tried everthing... I left to charge overnight but not charging.. I even get M logo when I put it charge and remove the battery...My system 1 has GApps and system 3 has CM 11. I don't know if its not working because of something I did while installing..I tried removing battery and putting it back...So can you help getting it working.
Regards.
kannada said:
Hello All,
I was putting custom Rom CM11 to my system. I tried installing but it was stuck in Boot loop. Now it ran out of battery. Now it does not start. When I try to charge it get struck at M logo. I am not able to go to bootloader or recovery. Tried everthing... I left to charge overnight but not charging.. I even get M logo when I put it charge and remove the battery...My system 1 has GApps and system 3 has CM 11. I don't know if its not working because of something I did while installing..I tried removing battery and putting it back...So can you help getting it working.
Regards.
Click to expand...
Click to collapse
U will need to charge the battery externally using a external battery charger or McGruyver method just Google it will solve ur issue.

Nexus 5 completely dead

Alright so my Nexus 5 was running perfectly on 6.0. Today I was going back home from school and I had like 2% battery. It showed the powering off window and shut down. I plugged it in the OG charger that came with it and booted it up and started using it. When it reached about 5% the phone froze and restarted. However upon reaching the Android logo it froze again and repeated the process. So I thought I should leave it for a while to charge and boot it later. Charged it fully, powered on, Android is optimizing apps showed up and froze again. Tried a completely wipe but then I got a "TZ crash Demigod Crash Handler" telling me to take a ram dump of the phone.
DEmiGod Crash Handler : HW Reset!
Press key to choose Dload Mode or Reboot.
1) Volume Up : Dload Mode.
2) Volume Down : Reboot.
If you choose Dload Mode,
Please do following action.
1) Dload Mode. Please connect USB.
2) Get the ram dump image using QPST Configuration.
Tried flashing 6.0 via fastboot hoping it would solve the problem, but to no avail. Now the phone won't boot into anything. Bootloader, recovery, nothing. It won't even show the battery logo when it's charging. I've had this phone for a year and a half, and I haven't damaged it in any way.
Is it possible that I could do something to remedy this, or is it the repair shop?
Thanks in advance
Lynuxen said:
Alright so my Nexus 5 was running perfectly on 6.0. Today I was going back home from school and I had like 2% battery. It showed the powering off window and shut down. I plugged it in the OG charger that came with it and booted it up and started using it. When it reached about 5% the phone froze and restarted. However upon reaching the Android logo it froze again and repeated the process. So I thought I should leave it for a while to charge and boot it later. Charged it fully, powered on, Android is optimizing apps showed up and froze again. Tried a completely wipe but then I got a "TZ crash Demigod Crash Handler" telling me to take a ram dump of the phone.
DEmiGod Crash Handler : HW Reset!
Press key to choose Dload Mode or Reboot.
1) Volume Up : Dload Mode.
2) Volume Down : Reboot.
If you choose Dload Mode,
Please do following action.
1) Dload Mode. Please connect USB.
2) Get the ram dump image using QPST Configuration.
Tried flashing 6.0 via fastboot hoping it would solve the problem, but to no avail. Now the phone won't boot into anything. Bootloader, recovery, nothing. It won't even show the battery logo when it's charging. I've had this phone for a year and a half, and I haven't damaged it in any way.
Is it possible that I could do something to remedy this, or is it the repair shop?
Thanks in advance
Click to expand...
Click to collapse
Try manually flashing a new kernel, seeing most of it relating to a bad boot/kernel image
PS what happens when u try dload mode?
Sent from my Nexus 6 using Tapatalk
Lynuxen said:
Alright so my Nexus 5 was running perfectly on 6.0. Today I was going back home from school and I had like 2% battery. It showed the powering off window and shut down. I plugged it in the OG charger that came with it and booted it up and started using it. When it reached about 5% the phone froze and restarted. However upon reaching the Android logo it froze again and repeated the process. So I thought I should leave it for a while to charge and boot it later. Charged it fully, powered on, Android is optimizing apps showed up and froze again. Tried a completely wipe but then I got a "TZ crash Demigod Crash Handler" telling me to take a ram dump of the phone.
DEmiGod Crash Handler : HW Reset!
Press key to choose Dload Mode or Reboot.
1) Volume Up : Dload Mode.
2) Volume Down : Reboot.
If you choose Dload Mode,
Please do following action.
1) Dload Mode. Please connect USB.
2) Get the ram dump image using QPST Configuration.
Tried flashing 6.0 via fastboot hoping it would solve the problem, but to no avail. Now the phone won't boot into anything. Bootloader, recovery, nothing. It won't even show the battery logo when it's charging. I've had this phone for a year and a half, and I haven't damaged it in any way.
Is it possible that I could do something to remedy this, or is it the repair shop?
Thanks in advance
Click to expand...
Click to collapse
Maybe help you
forum.xda-developers.com/google-nexus-5/development/tool-06-03-14-one-click-factory-restore-t2513937
jordirpz, you have no idea how much I am thankful, it's running again.
Cheers!
I have this problem. AFter fitting KDIFIX replacement back cover (replacing one that overheated when charging on an LG WCP-300 charging pad) the replacement cover caused a little heating, spontaneous reboot of the phone, THEN this "green screen of death."
Have reflashed all partitions but user data with M4B30Z ( was running an earlier one), no joy. Have disconnected the battery for a few hours in hopes that perhaps this will resolve, as the partitions were erased and flashed A-OK with SDK fastboot. :fingers-crossed:
UPDATE:
Nope, didn't do it. It won't boot to Recovery, won't get past the Google logo before restarting. Will boot into fastboot and stay there for hours. Oddly, plugging into power will cause it to boot, NOT show teh b/w battery image. I wonder if this aftermarket cover fried something in the charging circuit. Brand new replacement battery, too.

Charging Problem

I have read all the threads regarding charging or battery problems.But mine is unique
I am trying to explain the situation.So please read through it.
Couple of days back my phone was charging very slowly while i was playing on it.Since AOSPA had a problem of slow charging, I switched backed to CM13.When i rebooted the phone died on boot animation.I coudnt turn it back on,whenever I try to it just gave a vibration.I thought the battery deep discharged.But some how after some time i was able to get into recovery and fastboot.So when I plug in the charger I get the oneplus logo and charging animation and it will reboot again.But when i boot into recovery(twrp 3.0.2.0) and charge, it charges fine.The fastboot commands also works fine.But when i boot into the ROM and try charging,it wont charge.Occasionally I am able to charge my phone.I have tried going back to stock (cm11s) ,Changing ROMs etc. Since i able to perform fastboot operations successfully,I dont think the USB port is damaged.There is no sign of water damage.Is there any way I can diagonise the problem ? I really dont know whats wrong with the phone.
Please help

Samsung Tab 2 [GT-P3100] Won't work

Summary: I was installing a Slim7 custom rom on my tablet when before it finishes off the power went off and my device turned off completely, when I was trying to boot back on Recovery [TWRP] it won't work so thus Download mode it is completely dead. Thinking this was a battery problem (drained, I guess) I tried to charge my tablet but it doesn't charge properly, stucked in "cycle" logo inside a battery (but won't animate as usual) and doesn't proceed to actual charging animation.
"I am sure this was due to battery problem, I tried to install it with 5% battery (but charging on a pc). I think it didn't charge correctly until it ran out."
I tried everything that might help myself
- holding power button for few minute and plugging the charger after a couple of seconds..
- Using Samsung Kies
- Odin
So how do I fix this problem??
please help me.
none works. hopefully someone here is willing to help me out, thanks in advance
You should never use KIES if you installed a custom ROM or a custom recovery - it's likely to fail and giving "black screen of death"

Categories

Resources