[Completed] xperia - XDA Assist

how to install custom rom(12.1 cyanogen mod) and upgrade to lolipop 5.1...?
i am using xperia M which is currently running on 4.3(single sim)..

Hi there,
See this thread:
[ROM][LMY48B][5.1.1][NIGHTLY/FXP] Official CyanogenMod 12.1
Install instructions: (For 1st time only)
•boot into fastboot (ignore if you coming any 4.4/5.0 rom)
•flash boot.img from cm12 zip (ignore if you coming from any 4.4/5.0 rom)
•boot into custom recovery
•Wipe data and cache
•Flash the CM12.1 and gapps zip
•Reboot
Upgrading from earlier version of CyanogenMod 12.1:
•Boot into Recovery
•Flash CM12.1 zip
•Reboot
Click to expand...
Click to collapse
For any other questions please ask directly here: [HELP THREAD][C1904] All Questions Welcome!
Good luck

Related

[ROM] [AOKP] [4.4.4] - Galaxy ACE 3 LTE [UNOFFICIAL]

Galaxy ACE 3 LTE users, I represent you AOKP custom AOSP based ROM!
Everything is like CM11 from this thread i suppose : http://forum.xda-developers.com/showthread.php?t=2800259
You will need CWM from the CM11 thread in order to install!!!
GAPPS: http://forum.xda-developers.com/showthread.php?t=2608800
Download: https://mega.co.nz/#!Jk1XjJ5Q!4si-OqvZ3CYgRedBV91ieJcehJ-Tx6FO44ggQQMh8NE
INSTALLATION
1.Reboot into recovery
2.Wipe data factory reset
3.Format system
4.Flash Rom
5.Flash Gapps
6.Reboot
ENABLE ART(Need fresh install)
1. Reboot into recovery mode
2. Wipe data, cache and dalvik cache
3. Format /system partition
4. Flash cm11
5. Reboot
6. Enable ART
7. Reboot into Recovery
8. Flash Gapps
9. Reboot
This is for GT-S7275R
Attention: It is harder for me to support AOKP rather than CM so do not ask for updates, I' ll do everything i can
Don't forget to press "Thanks"!!!
PS: I am not responsible for any damage to your device
kostoulhs said:
Galaxy ACE 3 LTE users, I represent you AOKP custom AOSP based ROM!
Everything is like CM11 from this thread i suppose : http://forum.xda-developers.com/showthread.php?t=2800259
You will need CWM from the CM11 thread in order to install!!!
GAPPS: http://forum.xda-developers.com/showthread.php?t=2608800
Download: https://mega.co.nz/#!Jk1XjJ5Q!4si-OqvZ3CYgRedBV91ieJcehJ-Tx6FO44ggQQMh8NE
INSTALLATION
1.Reboot into recovery
2.Wipe data factory reset
3.Format system
4.Flash Rom
5.Flash Gapps
6.Reboot
ENABLE ART(Need fresh install)
1. Reboot into recovery mode
2. Wipe data, cache and dalvik cache
3. Format /system partition
4. Flash cm11
5. Reboot
6. Enable ART
7. Reboot into Recovery
8. Flash Gapps
9. Reboot
This is for GT-S7275R
Attention: It is harder to support AOKP rather than CM so do not ask for updates, I' ll do everything i can
Don't forget to press "Thanks"!!!
PS: I am not responsible for any damage to your device
Click to expand...
Click to collapse
Bugs?
Arcanister99 said:
Bugs?
Click to expand...
Click to collapse
I haven't tested it a lot yet, i think that everything is like in CM11
Didn't find anything major
For personal reasons the OP is not able to support this project.

[Q] Updating PhilZ Touch Recovery

Hi,
I am running PAC-ROM | All-in-One-ROM [4.3 / 4.2.2 ] on my 5110 with Philz Touch 5.03.7 (Base version 6.0.3.2) but want to install the following Rom:
[P51xx][5.x] CyanogenMod (CM12 / CM 12.1).
But I believe I need to update my Recovery to install a LP rom.
I have gone through the [GT-P51XX] TWRP | PhilZ Touch | CWM Thread (http://forum.xda-developers.com/showthread.php?t=2548476) to try to understand what I need to do but I am still unsure of exactly what I need to do.
I've located the files for the new recovery from (https://www.androidfilehost.com/?w=files&flid=25711) but I am unsure whether I flash the md5 file or the Tar file (or both)? Also, can I flash this new recovery from the Recovery I have currently got.
Any help with this would be appreciated as I haven't messed about with ROMs for over a year so I am a bit (a lot) rusty at the moment.
Thanks in advance
TWRP recovery is better and more intuitive.
Grab the latest zip file, not tar.md5 file, from here :
https://www.androidfilehost.com/?w=files&flid=25708
and flash it directly from your PhilZ recovery.
Cool, cheers. Do I need to factory reset device before flashing that?
Thanks again
Just follow the OP instructions :
Installation
First time installing CyanogenMod to your Galaxy Tab 2, or coming from another ROM:
Read the official wiki
Copy GApps and CM-Rom ZIPs to your internal SDCard
Boot into Recovery
wipe data factory reset
wipe cache
wipe dalvic cache
format system
Flash CM-Rom ZIP from internal SDCard
Flash GApps zip from internal SDCard
Reboot
Don't restore system data using Titanium Backup!
Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Click to expand...
Click to collapse
I was ok with the rom instructions, I couldn't find any instructions about flashing the recovery.
I just went for it so all sorted now, thanks for help.
Sent from my C6603 using Tapatalk

[Completed] Support on howto install Cyanogen 12.1 on Kingzone K1 Turbo

Dear all
I would like to test the cyanogen Rom on my Kingzone K1 Turbo. I found in this forum a rom ([ROM][5.1.1] CyanogenMod 12.1 for Kingzone K1 Turbo) with the following instruction of installation, on which I would like to ask some questions in order not do do any mistakes.
The steps listed are as follows (my questions are in brackets):
Download the ROM (clear)
Download GApps package (clear)
Put the zip files on your SDCard (internal SD card not on additional I suppose. Exact location?)
Reboot in Recovery (my phone is currently encrypted. I assume that I have to do a factory reset before to decrypt and the power and volume+?)
Wipe Data/Factory Reset (in settings, I suppose? Or is it a menue point?)
Install CM12 zip file (how is the installation started?)
Install GApps zip file (dito above)
Reboot system
Enjoy CyanogenMod 12 .
Thank you a lot for support
XDA Visitor said:
Dear all
I would like to test the cyanogen Rom on my Kingzone K1 Turbo. I found in this forum a rom ([ROM][5.1.1] CyanogenMod 12.1 for Kingzone K1 Turbo) with the following instruction of installation, on which I would like to ask some questions in order not do do any mistakes.
The steps listed are as follows (my questions are in brackets):
Download the ROM (clear)
Download GApps package (clear)
Put the zip files on your SDCard (internal SD card not on additional I suppose. Exact location?)
Reboot in Recovery (my phone is currently encrypted. I assume that I have to do a factory reset before to decrypt and the power and volume+?)
Wipe Data/Factory Reset (in settings, I suppose? Or is it a menue point?)
Install CM12 zip file (how is the installation started?)
Install GApps zip file (dito above)
Reboot system
Enjoy CyanogenMod 12 .
Thank you a lot for support
Click to expand...
Click to collapse
Hello
Yes, It is correct way. You may check here too.
-Vatsal

Gapps Failed in flashing What to do ?">

Gapps is not flashing in cm 13 unoffical lettuce
i've tried gapps 5.1.1 o \r 6.0 booth both are failing what to do ?? help me
mnksngh706 said:
Gapps is not flashing in cm 13 unoffical lettuce
i've tried gapps 5.1.1 o \r 6.0 booth both are failing what to do ?? help me
Click to expand...
Click to collapse
1. Download Open_GApps from here: http://opengapps.org
Select the following details for downloading:
Platform: ARM64
Android: 6.0
Variant: Mini (Recommended)
2. Flash CM.zip freshly and immediately flash that GApps.zip (make sure to clear dalvik-cache)
3. Reboot System

[ROM][4.4.2] CM11 For Symphony w70q,Micromax A092,Mito A310

CM11
Features:
Android 4.4.4 based
Move to SD available
INSTRUCTION TO FLASH ROM:
1.You must have a custom recovery on Symphony w70q,Micromax A092,Mito A310
2.If you have already flashed custom recovery, then only proceed
3.Wipe data/factory reset in recovery
4.Wipe data factory reset
5.Flash ROM from sdcard
6.Reboot and enjoy
Credits:
==>Darshan Manjrekar For Porting This ROM
==> Nayeem Hossen (Me) For fixing all buges
Downloads:
ROM:
https://docs.google.com/uc?id=0B5FI_PeZ3xaEdEkwYVNTQzdPcWM&export=download
Note: No need to flash gapps and storage patch fix all is fixed
Hit Thanks

Categories

Resources