I've had my Galaxy tab 2 10.1 flashed with CWM recover and CM10RC3 for a while. i finally found the tablet again recently and decided to update. I couldn't flash any experimental CM (nightlies), so updated my recovery to TWRP 2.8.5.0.
I still can't flash any ROMs. OS won't boot, I can only access download mode and my recovery.
When I tried flashing with CWM, i got an error 7 code, and it also said that the ROM was built for X, Y, and Z model, and mine was espresso10rw. I can't find any information on this model anywhere, all i see are the p51xx.
Related
hi everyone, just not sure if you have this problem before.
this is my situation:
I have tried to flash mike.1986 's new rom, Android revolution hd 9.0, but it has got stuck on the EFS partition screen and then my note 10.1 (n8000) cannot be turn on properly again.:crying:
So i use odin to flash the official rom (from sammobile), back to the Chinese PRC version. and it works again.
But i found out that the PRC rom does not have google framework, no play store, no google map and etc. so i downloaded a HK version one, but in Odin, it came out error, and not working again. Try all other official roms, but no of them working except the PRC one.
I have tried to flash CMW recovery, and install zip from sd card, like what i have been told. none of the custom roms work as well. :crying:Also tried the Wammlite rom, it said flash completed, but then it stucked on Galaxy Note 10.1 screen....:crying:
That's about it. If anyone can kindly let me know to flash other roms instead of the PRC official rom, that will be great.:fingers-crossed:
Thank you so much in advance!:highfive:
Problems sloved
Used the Galaxy Note 10.1 Tool Kit, use the TWRP instead of CWM. Then all good! Thanks to mskip!:good:
1. is there a way after being rooted that we can flash TWRP, PHILZ or CWM to recovery?
2. Has anyone every attempted to build a rom for the 10.1
I found this post, it doesn't seem to bad but I wouldn't want to attempt it with out a backup and recovery
http://forum.xda-developers.com/showthread.php?t=1801690
Stock firmware
Besides CM10.2, there aren't any roms that work with our device (sch-i925u). However, the stock firmware is now available on Sammobile (http://www.sammobile.com/firmwares/3/?download=24589) and devs can use it to build custom roms. If you can talk a dev into building us one, that would be even better!
I recently rooted my galaxy tab 2 P3110 with Odin and CWM recovery 6011 and i seemed to have wiped the stock android os as i cannot boot into it anymote - the Tablet automically boots into CWM all the time
Then when i try to install Slimrom or CM installer to flash and install a new OS but i getting an error 7 - unverified file so i cannot put any Os back on the device
Can anyone help?
Sounds like you flashed the wrong recovery, possible that you installed the p3100 recovery.
Try reflashing the recovery.
miksol said:
I recently rooted my galaxy tab 2 P3110 with Odin and CWM recovery 6011 and i seemed to have wiped the stock android os as i cannot boot into it anymote - the Tablet automically boots into CWM all the time
Then when i try to install Slimrom or CM installer to flash and install a new OS but i getting an error 7 - unverified file so i cannot put any Os back on the device
Can anyone help?
Click to expand...
Click to collapse
Flashing KK ROMs on outdated recovery will get you a status 7 error. Grab the latest (I'd go with TWRP as CWM support will be ending soon) version from here...http://forum.xda-developers.com/showthread.php?t=2548257 update to the latest one you like (CWM is 6.0.5.0) Load up a ROM and give it a go. I put all my ROMs on an external card to be safe. Maybe do that and then just install from such.
p,s. CM installer never works, I dont think our tabs are compatible with it. At least I've never got it to work.But, you dont need it anyways.
Hello xda members,
i have a a31 Majestic tab 110n (i know bad choice), it has never been updated and the stock sofware sucks really bad. So i tried to install a custom recovery and ROM, Cm 10.2 from Christian Troy. I tried to flash from zip. sdcard TWRP for ONDA v792 but the touch didn't work. so i tried to install latest CWM and didnt get trough either. I couldnt flash with odin and phoenix cause locked bootloader. I ask you if there is a custom recovery and rom i can flash.
I hope i can get some answer here. i would really appreciate it. if there is any developer that can develope a compatible recovery i would pay him for sure.
I POST HW INFORMATION:
MOD. TAB 110N
PROC QuadCore A31Series
Android version 4.2.2
FIRMWARE VERSION 3.2_20130717
KERNEL VERSION 3.3.0
BUILD NUMBER A31S_Q1001L3_1307286.20130730
i had cm10 installed but after a few months of problems i decided to upgrade to cm11. After trying to upgrade to twrp 2.8.3 something happened then my cyangen was tripping balls so i went back to stock s3 4.1.3 by flashing with odin. Then i rooted my s3 again using odin. Then i installed rashr and installed twrp 2.8.3. Then i booted into twrp 2.8.3 and before twrp loaded it had the cyanogen logo on it.Then did factory reset and the davik cahce clear thing. Then i proceeded to installed cm11 20141112 snapshotm12 and gapps kk20140606 but when i rebooted my s3 in still goes into the stock andriod what is going on? i tried to install cyanogen mod from a different sd card and i have no luck
eric95204 said:
i had cm10 installed but after a few months of problems i decided to upgrade to cm11. After trying to upgrade to twrp 2.8.3 something happened then my cyangen was tripping balls so i went back to stock s3 4.1.3 by flashing with odin. Then i rooted my s3 again using odin. Then i installed rashr and installed twrp 2.8.3. Then i booted into twrp 2.8.3 and before twrp loaded it had the cyanogen logo on it.Then did factory reset and the davik cahce clear thing. Then i proceeded to installed cm11 20141112 snapshotm12 and gapps kk20140606 but when i rebooted my s3 in still goes into the stock andriod what is going on? i tried to install cyanogen mod from a different sd card and i have no luck
Click to expand...
Click to collapse
Do you mean this unofficial CM11: [ROM][4.4] CM 11 Unofficial - Beta 7 11-22-13 (Discontinued due to new device)?
Or this one: Cyanogenmod CM11?
Please check this thread: T999 UVDMD5 Firmware / Bootloader.
According to this, you might have to update some files (bootloader, modem, etc.) to be able to install newer CM versions.
AFAIK, only CM10 is officially suported for your device: [ROM][OFFICIAL] CyanogenMod 10 Nightly Builds for SGH-T999.
If you have further questions, please ask in the T-Mobile Galaxy S III Q&A, Help & Troubleshooting.
Thread closed and thank you.