ok so my s6 had some ram issues.....the version was 5.0.2 and couldnt update ....i found on sam mobile a 5.1.1 version from my country and i could barely update it using odin ( got full of errors ..had my soft bricked and so on) i finally managed to get to 5.1.1 and i can say it works better but i have no service....( http://www.sammobile.com/firmwares/database/SM-G920F/COA/ ) my phone was bought sim free and i dont rly understand how the versions work and i got the one from my carrier.......
the first odin error i got was when i tried the 5.1.1 . fail at hidden.img or something like this
now i tried to add the old version 5.0.2 but i get <ID:0/007> NAND Write Start!!
i also tried smart switch but the version is not supported for initializing ...what should i do ?
smeen23 said:
ok so my s6 had some ram issues.....the version was 5.0.2 and couldnt update ....i found on sam mobile a 5.1.1 version from my country and i could barely update it using odin ( got full of errors ..had my soft bricked and so on) i finally managed to get to 5.1.1 and i can say it works better but i have no service....( http://www.sammobile.com/firmwares/database/SM-G920F/COA/ ) my phone was bought sim free and i dont rly understand how the versions work and i got the one from my carrier.......
the first odin error i got was when i tried the 5.1.1 . fail at hidden.img or something like this
now i tried to add the old version 5.0.2 but i get <ID:0/007> NAND Write Start!!
i also tried smart switch but the version is not supported for initializing ...what should i do ?
Click to expand...
Click to collapse
I'm sorry I can't really help you as I am still on 5.0.2 myself, but once you upgrade to 5.1.1, you cannot downgrade back to 5.0.2, which might the cause of some of your issues.
Japultra said:
I'm sorry I can't really help you as I am still on 5.0.2 myself, but once you upgrade to 5.1.1, you cannot downgrade back to 5.0.2, which might the cause of some of your issues.
Click to expand...
Click to collapse
so there is no way to downgrade using odin? oh thats not good ...how do i know for sure what 5.1.1 is good for my phone? my baseband version only matched a 5.0.2 version from there.....or is not the baseband i should look for when getting a firmware? i could stay on this but i cant get the service
to work
smeen23 said:
so there is no way to downgrade using odin? oh thats not good ...how do i know for sure what 5.1.1 is good for my phone? my baseband version only matched a 5.0.2 version from there.....or is not the baseband i should look for when getting a firmware? i could stay on this but i cant get the service
to work
Click to expand...
Click to collapse
As far as I know, it's permanent. Have you tried taking your sim out and sticking it back in?
Japultra said:
As far as I know, it's permanent. Have you tried taking your sim out and sticking it back in?
Click to expand...
Click to collapse
yep ...it doesnt work
smeen23 said:
yep ...it doesnt work
Click to expand...
Click to collapse
Don't inbox me for queries. Just quote me for or mention me. That'd be enough.
Which Odin version are you using?
I suggest using older version I.e 3.0.7 or 3.0.9
Quote me back
Odin the tar file for TWRP 2.8.7.1 to get a recovery on the phone first, then try once again to Odin the 5.0.2 stock firmware -- this is what worked for me in a similar situation where I could not Odin the stock firmware as the recovery somwehow was damaged and that was stopping Odon from completing a flash.
Hnk1 said:
Don't inbox me for queries. Just quote me for or mention me. That'd be enough.
Which Odin version are you using?
I suggest using older version I.e 3.0.7 or 3.0.9
Quote me back
Click to expand...
Click to collapse
used 3.10.6 and the both u mentioned still not working...also my knox seemed to trigged
lgsshedden said:
Odin the tar file for TWRP 2.8.7.1 to get a recovery on the phone first, then try once again to Odin the 5.0.2 stock firmware -- this is what worked for me in a similar situation where I could not Odin the stock firmware as the recovery somwehow was damaged and that was stopping Odon from completing a flash.
Click to expand...
Click to collapse
well i am on 5.1.1 and aparently i wont be able to downgrade the version to stock...
Related
Oke....sit down for the next one:
I hava a Note 10.1 N8010.
All was fine...but i wanted back to stock...so downloaded firmware and went into Odin.
Everything seemed fine but i got some errors (dont remember wich...sorry)...but eventually the note was flashed...had to put in the PIT file too if i remember correctly or it didnt flash. But now:
As i said...it is a N8010....in phone info under settings it says i have a N8013.....and if i go into download mode it says i have a N8000....???????????
I cannot flash the stock fitmware for N8010.....when flashing in Odin it stucks at writing NAND flash....thats all.
What went wrong....and how to correct ???? The tablet works fine...but i want to sell it....stock.
Any ideas ????
PassieWater said:
Oke....sit down for the next one:
I hava a Note 10.1 N8010.
All was fine...but i wanted back to stock...so downloaded firmware and went into Odin.
Everything seemed fine but i got some errors (dont remember wich...sorry)...but eventually the note was flashed...had to put in the PIT file too if i remember correctly or it didnt flash. But now:
As i said...it is a N8010....in phone info under settings it says i have a N8013.....and if i go into download mode it says i have a N8000....???????????
I cannot flash the stock fitmware for N8010.....when flashing in Odin it stucks at writing NAND flash....thats all.
What went wrong....and how to correct ???? The tablet works fine...but i want to sell it....stock.
Any ideas ????
Click to expand...
Click to collapse
Couple questions: What stock firmware did you try to flash? And what version of Odin did you use?
electrikjesus said:
Couple questions: What stock firmware did you try to flash? And what version of Odin did you use?
Click to expand...
Click to collapse
ODIN 3.07
Firmware...not sure anymore
If you flashed the leaked KitKat ur screwed sorry.
Sent from my SGH-I337M using XDA Free mobile app
Hi,
I think i soft-bricked my phone by flashing modem and bootloader in my S6 International 920F phone.
Downloaded 5.1.1 modem and bootloader from this topic and followed the instructions exactly:
http://forum.xda-developers.com/gal...-xtrestolite-pure-edition-1-0-beta-1-t3082467
ODIN gave no sign of a failure so after flashing the phone rebooted and now it won't further than the Galaxy S6 bootscreen.
In the top of the screen a message says: "SYSTEM REV. CHECK FAIL. DEVICE: 2 BINARY: 1"
I've searched already for a solution but i can't find a specific.
Anyone who can help me please?
Got it recovered trough Kies3 but still don't know what went wrong
cvdv1991 said:
Got it recovered trough Kies3 but still don't know what went wrong
Click to expand...
Click to collapse
how did you do it? cz i had the same problem
Reflash your S6 with standard 5.1.1 ROM via odin.
I did a restore via Kies3, wasn't expecting much but did the trick.
Thats good.
madguylb said:
how did you do it? cz i had the same problem
Click to expand...
Click to collapse
Did you get your phone working? I have the same problem.
FlyingColors said:
Did you get your phone working? I have the same problem.
Click to expand...
Click to collapse
yes i got it working finally, just download the 5.1.1 official rom from samfirmware related to ur region and install it from odin 3.10.6 the version in the XtreStoLite link not any other odin cz it did not work to me.
madguylb said:
yes i got it working finally, just download the 5.1.1 official rom from samfirmware related to ur region and install it from odin 3.10.6 the version in the XtreStoLite link not any other odin cz it did not work to me.
Click to expand...
Click to collapse
Yeah I got it working. Doing just AP worked for me. Literally took me an hour of crossing my fingers hoping I didn't brick my phone. All good though, thanks.
FlyingColors said:
Yeah I got it working. Doing just AP worked for me. Literally took me an hour of crossing my fingers hoping I didn't brick my phone. All good though, thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s6/help/galaxy-s6-sm-920f-rom-installed-stuck-t3162852
Sprint s6 edge it was boot looping only staying in Android for maybe 3-5 mins at a time. So i tried to flash it. I may have flashed 5.0.x to it. Now when I try to flash I can flash cm.bin, sboot and it always dies on boot.img. I really need some guidance on what i should try next.
Looking around shows boot.img not flashing is possibly the kernel but I am having trouble finding one that it will let me flash.
peterm20 said:
Sprint s6 edge it was boot looping only staying in Android for maybe 3-5 mins at a time. So i tried to flash it. I may have flashed 5.0.x to it. Now when I try to flash I can flash cm.bin, sboot and it always dies on boot.img. I really need some guidance on what i should try next.
Looking around shows boot.img not flashing is possibly the kernel but I am having trouble finding one that it will let me flash.
Click to expand...
Click to collapse
Were you originally on 5.1.1?
If so, are you having a hard time Odin-ing the stock rom?
Robbie Doo said:
Were you originally on 5.1.1?
If so, are you having a hard time Odin-ing the stock rom?
Click to expand...
Click to collapse
yes, it is a phone of a friend though I was trying to repair it. I downloaded the 5.1.1 from that slow sammoble site.
peterm20 said:
yes, it is a phone of a friend though I was trying to repair it. I downloaded the 5.1.1 from that slow sammoble site.
Click to expand...
Click to collapse
Since you were on 5.1.1 I don't think you would have any trouble Odining the stock ROM onto the phone. I've done it a few times and it worked OK. After you push the stock ROM you can root it if you want to.
Robbie Doo said:
Since you were on 5.1.1 I don't think you would have any trouble Odining the stock ROM onto the phone. I've done it a few times and it worked OK. After you push the stock ROM you can root it if you want to.
Click to expand...
Click to collapse
Well the problem is it won't flash past boot.img
As soon as boot.img is started it goes a green bar on Oden about 3/4 of the way and then goes FAILED! and oden disconnects the device.
peterm20 said:
Well the problem is it won't flash past boot.img
As soon as boot.img is started it goes a green bar on Oden about 3/4 of the way and then goes FAILED! and oden disconnects the device.
Click to expand...
Click to collapse
If you went from 5.1.1 to 5.0.X it's most likely hard bricked.
Soooperstar said:
If you went from 5.1.1 to 5.0.X it's most likely hard bricked.
Click to expand...
Click to collapse
Even if i can get in to download mode?
peterm20 said:
Even if i can get in to download mode?
Click to expand...
Click to collapse
Yea.... You have to stay within the same android version, ex. Any of the 5.1.1 updates. The firmware version that you're trying to restore with, is it OF7?
Soooperstar said:
Yea.... You have to stay within the same android version, ex. Any of the 5.1.1 updates. The firmware version that you're trying to restore with, is it OF7?
Click to expand...
Click to collapse
I think it is OF7.
peterm20 said:
I think it is OF7.
Click to expand...
Click to collapse
It should say it on the tar file. It's worth a try but you're probably dead. Here is the file if you need it but like I said, most likely you're done.
http://forum.xda-developers.com/showthread.php?t=3154757
peterm20 said:
Well the problem is it won't flash past boot.img
As soon as boot.img is started it goes a green bar on Oden about 3/4 of the way and then goes FAILED! and oden disconnects the device.
Click to expand...
Click to collapse
Which version of the Odin are you using?
Soooperstar said:
It should say it on the tar file. It's worth a try but you're probably dead. Here is the file if you need it but like I said, most likely you're done.
http://forum.xda-developers.com/showthread.php?t=3154757
Click to expand...
Click to collapse
It worked for me. I have a friend who did the same thing and thought the phone was a gonner. I told her I'd give it a try and I was able to Odin (v.3.10.6) to OF7, took the OTA to OH1 and flashed Wicked One SS v.3.0 from @dazednconfused and she says it's running perfect.
Also, @Soooperstar Odin file here.
JediMindTrixx said:
It worked for me. I have a friend who did the same thing and thought the phone was a gonner. I told her I'd give it a try and I was able to Odin (v.3.10.6) to OF7, took the OTA to OH1 and flashed Wicked One SS v.3.0 from @dazednconfused and she says it's running perfect.
Also, @Soooperstar Odin file here.
Click to expand...
Click to collapse
Your friend went from 5.1.1 to 5.0.X? That's the link I just gave him
Yes she did. Sorry about that, saw that afterwards.
Sent from a Galaxy S6 Edge... Far, Far, Away...
JediMindTrixx said:
Yes she did. Sorry about that, saw that afterwards.
Sent from a Galaxy S6 Edge... Far, Far, Away...
Click to expand...
Click to collapse
Interesting
Robbie Doo said:
Which version of the Odin are you using?
Click to expand...
Click to collapse
the latest one. I've seen various other flashing posts saying you should use a slightly older Oden.
Also side rant. I did a chat with samsung support and they said the Smart Switch recovery doesn't work with the S6? I cannot get it to verify the serial number of my phone (s6) and the broken one (s6 e)
peterm20 said:
the latest one. I've seen various other flashing posts saying you should use a slightly older Oden.
Also side rant. I did a chat with samsung support and they said the Smart Switch recovery doesn't work with the S6? I cannot get it to verify the serial number of my phone (s6) and the broken one (s6 e)
Click to expand...
Click to collapse
3.10.6 is what I use
peterm20 said:
the latest one. I've seen various other flashing posts saying you should use a slightly older Oden.
Also side rant. I did a chat with samsung support and they said the Smart Switch recovery doesn't work with the S6? I cannot get it to verify the serial number of my phone (s6) and the broken one (s6 e)
Click to expand...
Click to collapse
I'm not sure which version you are referring to as the latest one, but the only version that will work with what you're trying to accomplish is 3.10.6
Soooperstar said:
It should say it on the tar file. It's worth a try but you're probably dead. Here is the file if you need it but like I said, most likely you're done.
http://forum.xda-developers.com/showthread.php?t=3154757
Click to expand...
Click to collapse
Well your file got me way further than I've got before. I can get it to write the system.img in "BL" but if i use AP it fails about 1/2 the way through
peterm20 said:
Well your file got me way further than I've got before. I can get it to write the system.img in "BL" but if i use AP it fails about 1/2 the way through
Click to expand...
Click to collapse
Like I said from my knowledge, you should be hard bricked, but if someone else went from 5.1.1 to 5.0.X and back, you might want to find out what they did. Don't think it's possible
Sooooo, I tried by myself to root my s8+ from att and couldnt do it. So i tried oneclickroot.com and payed like a idiot to get it done and they did but now HATE it and would like to go back to factory. I have tried EVERYTHING it seems like and always get errors with odin! either its a FAIL! (Auth) error or something else. What in the world do I need to do to get back to factory!??? SM-G995U and says build # nrd90m.g955usqu2bk5
imadrunkie said:
Sooooo, I tried by myself to root my s8+ from att and couldnt do it. So i tried oneclickroot.com and payed like a idiot to get it done and they did but now HATE it and would like to go back to factory. I have tried EVERYTHING it seems like and always get errors with odin! either its a FAIL! (Auth) error or something else. What in the world do I need to do to get back to factory!??? SM-G995U and says build # nrd90m.g955usqu2bk5
Click to expand...
Click to collapse
do i need to go into supersu and go down to full unroot?
I would think just flashing the OEM firmware with Odin3 would reset phone back to factory would do the trick.
Sent from my SM-G955U using Tapatalk
just reread your post and you did use Odin but was that the regular version or did you try the modified "prince consey" ( probably spelled that wrong)?
RebelShadow said:
I would think just flashing the OEM firmware with Odin3 would reset phone back to factory would do the trick.
Sent from my SM-G955U using Tapatalk
just reread your post and you did use Odin but was that the regular version or did you try the modified "prince consey" ( probably spelled that wrong)?
Click to expand...
Click to collapse
thats what i have been trying but getting errors left and right. always get the FAIL! (auth) error or mismatch error. All im doing is going into download mode and then adding files and then start...and always get errors. Ive tried mutply att factory files and all same thing. tried like 10 versions of odin lol even the mod version prince one
Are u sure you're flashing the correct firmware for your phone?
Go to sammobile and download a fresh firmware for your phone type and try flashing again.
And by the way did they (oneclickroot) or yourself flash any other firmware whether custom or not in the phone after rooting?
Or have you or them updated the bootloader and modem?
gideonlfc said:
Are u sure you're flashing the correct firmware for your phone?
Go to sammobile and download a fresh firmware for your phone type and try flashing again.
And by the way did they (oneclickroot) or yourself flash any other firmware whether custom or not in the phone after rooting?
Or have you or them updated the bootloader and modem?
Click to expand...
Click to collapse
nope just asked and they say no bootloader updated, but i have the option of 19.99 for them to go back to stock smh.. now when looking for a working ATT stock firm do i look for my current baseband version?
So what happened?
I'm sure your bootloader got updated. Have to find firmware with same bootloader. Something that has u2...
Try this : https://forum.xda-developers.com/att-galaxy-s8+/how-to/g955u-stock-g955usqu2crc5-odin-files-t3773033
Well... I've been an idiot.
I recently rooted my Galaxy S7 device whilest scanning the xda threads for a custom ROM.
I flashed Lineage OS 15.1 custom ROM. Everything awesome so far. Except... I didn't like the visual estate of the ROM.
So next step, I flashed the Superman ROM 3.0.1 FINAL. this is where things went wrong.
When i booted up my phone after flashing Superman ROM I lost my IMEI & baseband (both say "Unknown").
I tried to flash stock ROM and ended up with 2 "unknown" IMEI's whilest my phone is a single SIM device.
After that I wiped the lot, flashed Lineage again and still no luck. Although with lineage I have my single IMEI which is still "Unknown".
I've tried flashing stock the correct stock roms but whenever I try to flash the via Odin I get a fail after "sboot.bin".
Odin won't go any further.
So in short, I currently have my device unlocked, rooted, with lineage OS15.1 but no cell service due to
IMEI and baseband being "Unknown".
Any idea's how to fix this?
I've tried the guide with the title "[GUIDE] How to fix IMEI / DRK issues [ALL MODELS][COMBINATION UPDATE 03 NOV 2017]"
But no luck. I can't flash stock firmware due to fail after "sboot.bin" both with stock firmware and the combination file
given in the thread.
Now as part of me being an idiot, I have not made an EFS or baseband backup, nor have I got a Smart Switch backup.
I'm also not capable of finding a person with the Z3Xbox.
Kind regards!
Did you try this https://forum.xda-developers.com/galaxy-s7/help/guide-how-to-fix-efs-damaged-samsung-t3850032
Thanks for the reply! Yes,I've tried that guide too. Problem is that I can't flash anything but twrp through Odin. All the rest fails at "sboot.bin". I'm still trying to download latest stock firmware but all the sites are sooooo slow if you don't pay premium... So I'm still waiting for that file to download. I've tried to flash older stock firmware but didn't get past " sboot.bin" and I've read somewhere that since Oreo Samsung doesn't let you flash old firmware on the phone. So that is at the moment my only hope that I can think of.
Make sure you have the latest version of Odin...you can use updato for faster downloads
cippi21 said:
Make sure you have the latest version of Odin...you can use updato for faster downloads
Click to expand...
Click to collapse
I've used different versions of Odin (v3.12, v3.13, v3.11) and I can only download at 50kb/s with updato. They changed there policy. Donate for premium download speed.
I also went to a repair shop today to ask if they knew any solution. The repair guy I talked to didn't know what root or rooting was so that's a dead end...
Oh ok I am kinda running out of ideas I didn't know updato changed their policy....there is a thread on the forum with the stock roms that people shared you might get better speeds using that...also one last thing you can do is use smart switch there is an option for firmware recovery or something like that try that and see
cippi21 said:
Oh ok I am kinda running out of ideas I didn't know updato changed their policy....there is a thread on the forum with the stock roms that people shared you might get better speeds using that...also one last thing you can do is use smart switch there is an option for firmware recovery or something like that try that and see
Click to expand...
Click to collapse
Thanks for helping though! Every helping hand is welcome! Smart switch recognizes my phone but if I select to recover firmware it doesn't recognize my phone because of the lost IMEI. So downloading to recovering stock firmware from samsung is difficult!
Did you try version 3.13.1 of Odin some people that had the same problem as you said it worked for them and also what model of s7 do you have
cippi21 said:
Did you try version 3.13.1 of Odin some people that had the same problem as you said it worked for them and also what model of s7 do you have
Click to expand...
Click to collapse
Jep, exact version that I used. I have a Samsung galaxy S7 unbrandend from Belgium. (SM-G930F)
Just read through your post again the superman rom is using the new bootloader 3 and as far as I know you can't downgrade to a bootloader 2 do you get a binary error in odin when you flash? Just trying to figure out what is going on when it stops at sbin
This is the latest rom for your country I know is branded as you can see but is the new bootloader 3 ...G930FXXS3ERI1 - GALAXY S7 SM-G930F PRO BELGIUM (PROXIMUS)
Found it on Sam mobile did you flash that one?
cippi21 said:
Just read through your post again the superman rom is using the new bootloader 3 and as far as I know you can't downgrade to a bootloader 2 do you get a binary error in odin when you flash? Just trying to figure out what is going on when it stops at sbin
This is the latest rom for your country I know is branded as you can see but is the new bootloader 3 ...G930FXXS3ERI1 - GALAXY S7 SM-G930F PRO BELGIUM (PROXIMUS)
Found it on Sam mobile did you flash that one?
Click to expand...
Click to collapse
That's what I was thinking. I've read the exact same thing yesterday. So I started downloading the firmware you just mentioned and the PHN Netherlands one. If one fails I've got another to try. Problem is, with those magnificent download speeds, it takes 24hours to download one of them (yeeeey 50kb/s!!!!!) It should be on my hard drive by tomorrow.
I'll keep you posted if this gets me past the Odin troubles!
I really appreciate you thinking along with me good sir! Thanks for your suggestions!
diSke said:
That's what I was thinking. I've read the exact same thing yesterday. So I started downloading the firmware you just mentioned and the PHN Netherlands one. If one fails I've got another to try. Problem is, with those magnificent download speeds, it takes 24hours to download one of them (yeeeey 50kb/s!!!!!) It should be on my hard drive by tomorrow.
I'll keep you posted if this gets me past the Odin troubles!
I really appreciate you thinking along with me good sir! Thanks for your suggestions!
Click to expand...
Click to collapse
I did exactly the same mistake as you (Lineage, Superman ROMS) and even bricked it trying to fix it!
The reason for that error code in my experience was that I was attempting to put the original firmware on the phone. Thanks to XDA forums and about a week of reading I realised that I had the Oreo ROM on the phone before all this happened, so I did what the poster above recommends and used the latest Odin and the latest firmware for your country from Sammobile. Bam! My S7 is running better than ever!
cippi21 said:
Just read through your post again the superman rom is using the new bootloader 3 and as far as I know you can't downgrade to a bootloader 2 do you get a binary error in odin when you flash? Just trying to figure out what is going on when it stops at sbin
This is the latest rom for your country I know is branded as you can see but is the new bootloader 3 ...G930FXXS3ERI1 - GALAXY S7 SM-G930F PRO BELGIUM (PROXIMUS)
Found it on Sam mobile did you flash that one?
Click to expand...
Click to collapse
Old man android said:
I did exactly the same mistake as you (Lineage, Superman ROMS) and even bricked it trying to fix it!
The reason for that error code in my experience was that I was attempting to put the original firmware on the phone. Thanks to XDA forums and about a week of reading I realised that I had the Oreo ROM on the phone before all this happened, so I did what the poster above recommends and used the latest Odin and the latest firmware for your country from Sammobile. Bam! My S7 is running better than ever!
Click to expand...
Click to collapse
You guy's are all amazing! Thank you so much!
Today I had the chance to flash original firmware to my phone. Flashed latest stock firmware from Holland (because Belgium firmware was branded and my S7 was unbranded).
Rebooted the phone, filled in the start menu's went in to settings and BAM, lost IMEI was lost no more!
Inserted my SIM card and had 4G connection! I didn't even had to flash the COMBINATION file.
I learned from my mistakes and immediatly flashed TWRP and made an EFS en IMEI backup!
Again, thank you so much good sirs! You guys really helped me not to lose hope!
Glad you fixed your phone hopefully this will help other people
diSke said:
You guy's are all amazing! Thank you so much!
Today I had the chance to flash original firmware to my phone. Flashed latest stock firmware from Holland (because Belgium firmware was branded and my S7 was unbranded).
Rebooted the phone, filled in the start menu's went in to settings and BAM, lost IMEI was lost no more!
Inserted my SIM card and had 4G connection! I didn't even had to flash the COMBINATION file.
I learned from my mistakes and immediatly flashed TWRP and made an EFS en IMEI backup!
Again, thank you so much good sirs! You guys really helped me not to lose hope!
Click to expand...
Click to collapse
Absolutely my pleasure! This site has taught me so much, it's great to give a little back.
Hi diSke, Did you find any solution for your IMEI issue, as i also faced same issue and lost IMEI after flashing Superman ROM, and faced same issue. Please let me know steps if you resolved the issue. Thanks in advance.
tarun2k9 said:
Hi diSke, Did you find any solution for your IMEI issue, as i also faced same issue and lost IMEI after flashing Superman ROM, and faced same issue. Please let me know steps if you resolved the issue. Thanks in advance.
Click to expand...
Click to collapse
Flash the latest version firmware for your region/network provider. IMEI restored.
cooltt said:
Flash the latest version firmware for your region/network provider. IMEI restored.
Click to expand...
Click to collapse
Earlier i was trying to flash via wrong Odin version 3.14. But after using Odin 3.13 version the latest firmware was successfully flashed and IMEI is restored back successfully. Thanks a lot for your help.