I have a Galaxy Note II with an Otterbox Defender case. I would like to use wireless charging.
Does anyone have experience of this combination and if so suggestions for receiver and charger?
I get the point about wireless charging, but you missed the point about the Otterbox case.
I want to be sure that the phone will charge with the case on.
OK so where do I get this charger from as I am in the UK?
The official wireless Qi charging door adds a few millimeters to the thickness. I had a Body Glove case over the phone but now it's a little tight and the case bows down the edge site.
Does anyone else have the wireless Qi door and case? If so, what case are you using and how well does it fit?
I found a partial answer here: http://forum.xda-developers.com/note-edge/accessories/note-edge-flip-wallet-qi-wireless-t2950494
Following the instructions in that thread I was able to crack open the Samsung OEM Qi Charging Door, pull out the Qi charging pad, and "transplant" it into the original plastic battery door. It created some raised spots on the back but the door clips shut all the way around and you can barely tell there are any raised spots once you put a case around the phone.
My current case is a Body Glove Satin Series. With this modification the case fits pretty good with just a slight wobble when laying it flat.
Did anyone find an answer to this without doing the mod?
i got that unicorn beetle case (i think that's the name). it "fits" with the glass screen protector and the wireless charging back (i still have to order a qi charger for my nightstand, office desk, and car, but im still looking for a case that will fit it perfectly. i really wish samsung shipped the phones with the wireless back, or at least make it the same size. is this a mythological case that i'm looking for? will any manufacturers step up to the plate? was this an issue with the note 3? i hope i can find the perfect case with a holster!
Samsung Galaxy Note 4 wireless QI Charging Modifi…: http://youtu.be/2-FEBpDieOg
Sent from my SM-N910T using Tapatalk 2
I use a Tech21 Classic Tactical case. It stretches around to fit the qi back. Tight fit but seems to hold up well.
Ok we need a list of case that we can and cannot charge while using a wireless charger. Please include brand, model number and link if possible. Wireless charges, brand, model number and link if possible. Thanks. I will put all cases and wireless chargers in one post for a fast and easy look up, if mods allow.
Case - i-Blason Prime Series Dual Layer*- https://www.amazon.com/gp/aw/d/B013...+belt+clip&dpPl=1&dpID=519HbBaRRuL&ref=plSrch
Wireless charger - lugulake - sorry no model or link it was a cheap one for about 7$ on amazon.
It will not charge on this and many others looking at Amazon reviews. But it is a great case.
Reserved if need be
I use this one - Galaxy S6 Edge Plus Case, Spigen [CARBON FIBER] Neo Hybrid Carbon Case
Works with Samsung Wireless Charging Pad, Choetech Circle QI Charger and MobilePal QI Power Bank - 10000 mAh.
It's protective (I've dropped my phone on hard concrete once from waist height) and looks good too!
Slim Armor Case
Spigen [AIR CUSHION] Slim Armor Case for Galaxy S6 Edge+ Champagne Gold working great with samsung wireless charger !!!! http://www.amazon.com/Galaxy-Edge-Spigen-CUSHION-Armor/dp/B010MWH1UW
Just got the Choetech quick charge wireless charger. It works great with my Spigen Thinnest case liquid crystal, available on ebay for $12. It's a really nice case that doesn't mask the phone or make it bulky while still providing protection.
Ok got my choetech circle wireless charger this weekend. The one with its ownthread here. It also will not charge my phone with my i-blason case. The only way I could get it to charge with the case on is to pop off the built in kick stand then it will charge with the case on. I also have the casemate naked tough case http://www.t-mobile.com/accessories...ge-plus-case-mate-naked-tough-case-clear.html the choetech wireless charger has no problems at all charging with this case on.
All these covers worked with wireless charging on 2 different wireless chargers and non of them was Samsung:
Galaxy S6 Edge Plus Case, Verus [Crystal Bumper][Shine Gold] - [Clear][Drop Protection][Heavy Duty][Minimalistic][Slim Fit] -For Samsung Galaxy S6 Edge+ SM-G928 Devices https://www.amazon.com/dp/B0131KPZU0/ref=cm_sw_r_awd_PTVewbE36M5P1
Galaxy S6 Edge Plus Case, Spigen® [Ultra Hybrid] AIR CUSHION [Crystal Clear] Clear back panel + TPU bumper for Galaxy S6 Edge+ (2015) - Crystal Clear (SGP11699) https://www.amazon.com/dp/B010MWEWVS/ref=cm_sw_r_awd_YUVewbXG4VD1D
Galaxy S6 Edge Plus Case, i-Blason [Scratch Resistant] Halo Series Hybrid Clear Case / Cover with TPU Bumper for Samsung Galaxy S6 Edge Plus + (Clear (Scratch Resistant)) https://www.amazon.com/dp/B013D5FFUS/ref=cm_sw_r_awd_pVVewb3XG9XYM
Galaxy S6 Edge Plus Case, Enther® [Ultimate Cushion]Galaxy S6 Edge Plus Case Clear Slim Scratch / Dust Proof Hybrid Transparent Case with Shock Absorb Trim Bumper https://www.amazon.com/dp/B013RZ9GEK/ref=cm_sw_r_awd_NVVewb6J8K7NX
My favorite is the first one in terms of look, feel and no finger print left, but I wish it was thinner..
Official Samsung S-View case is working fine with wireless charger.
Every official case I own (Crystal, Crystal View, S-View) and Spigen Liquid, Rock ultra thin TPU are working wine in Fast Charge mode.
k4syx said:
Every official case I own (Crystal, Crystal View, S-View) and Spigen Liquid, Rock ultra thin TPU are working wine in Fast Charge mode.
Click to expand...
Click to collapse
Fast charge mode, or wireless fast charger. I will be condensing and making the list I. On post soon.
UAG case (http://amzn.to/1PjUz9v) works with a wireless charger that I picked up from IKEA for $28
Edit: Link to IKEA charger http://www.ikea.com/us/en/catalog/products/80308307/
Wireless fast charge mode-you'll see what I mean when you'll get the charger. Just look at the notifications
I want to buy a protective case but I would much rather buy a protective case that also has wireless charging built in that utilizes the 2x accessory power pins. Anyone working on building such a case for PH-1?