Has anyone figured out how to NVFlash on Windows 8? You can't install the driver it says it is not signed properly.
Not my instructions but we aren't soposed to link to other forms
1. From windows 8 control panel choose General –> Under “Advanced Startup” –> Restart now.
Now the system will restart and might take some minutes to show up the boot menu. Wait for It patiently.
After some time you will be prompted with a menu with following options.
1. Continue
2. Troubleshoot
3. Turn off
Choose Troubleshoot
Then the following menu appears.
Refresh your PC
Reset your PC
Advanced Options
Choose Advanced Options
Then the following menu appears
System Restore
System Image Recovery
Automatic Repair
Command Prompt
Windows Startup settings
Choose Windows Startup Settings, then Click Restart.
Now the computer will restart and the boot menu appears. Choose “Disable Driver signature Enforcement” from the menu. Now windows will start and you can do the installation of the driver that is not signed.
Hello Guys,
I had a little trouble back there Installing the fastboot drivers with Windows 8 x64 system.
It looks like Windows 8 Only Installs the driver after verification on signature check.
I solved the problem after much reading... thought a guide would help others.
In case if you are facing the same problem, follow the steps below.
______________________________________________________________________________________
The steps to install a unsigned driver on windows 8 is as follows.
1. From windows 8 control panel choose General –> Under “Advanced Startup” –> Restart now.
Now the system will restart and might take some minutes to show up the boot menu. Wait for It patiently.
After some time you will be prompted with a menu with following options.
1. Continue
2. Troubleshoot
3. Turn off
Choose Troubleshoot
Then the following menu appears.
Refresh your PC
Reset your PC
Advanced Options
Choose Advanced Options
Then the following menu appears
System Restore
System Image Recovery
Automatic Repair
Command Prompt
Windows Startup settings
Choose Windows Startup Settings, then Click Restart.
Now the computer will restart and the boot menu appears.
Choose “Disable Driver signature Enforcement” from the menu.
Now windows will start and you can do the installation of the driver that is not signed.
thank you! used the guide for another driver but worked :good:
This guide needs update. It should be on the side bar click settings. Then at the bottom click pc settings. The option is not in control panel
Unsigned Driver Installation in Win8
Thank you buddy for the instruction, but before finding your post, I goolgled to fix this issue.
//meible.com/2013/10/disable-driver-signature-enforcement-in
Thank you, it's work perfectly
Thanks for guidance. I have also find very good tutorial alongwith images at:
makeuseof.com/tag/how-can-i-install-hardware-with-unsigned-drivers-in-windows-8/
Kindly, include the said link in your above post.
Regards,
OPEN MIND
dwarkesh2492 said:
Hello Guys,
I had a little trouble back there Installing the fastboot drivers with Windows 8 x64 system.
It looks like Windows 8 Only Installs the driver after verification on signature check.
I solved the problem after much reading... thought a guide would help others.
In case if you are facing the same problem, follow the steps below.
______________________________________________________________________________________
The steps to install a unsigned driver on windows 8 is as follows.
1. From windows 8 control panel choose General –> Under “Advanced Startup” –> Restart now.
Now the system will restart and might take some minutes to show up the boot menu. Wait for It patiently.
After some time you will be prompted with a menu with following options.
1. Continue
2. Troubleshoot
3. Turn off
Choose Troubleshoot
Then the following menu appears.
Refresh your PC
Reset your PC
Advanced Options
Choose Advanced Options
Then the following menu appears
System Restore
System Image Recovery
Automatic Repair
Command Prompt
Windows Startup settings
Choose Windows Startup Settings, then Click Restart.
Now the computer will restart and the boot menu appears.
Choose “Disable Driver signature Enforcement” from the menu.
Now windows will start and you can do the installation of the driver that is not signed.
Click to expand...
Click to collapse
Is this still valid in Windows 8.1?
After installation of the driver, will it stay installed?
Means: After reboot, will it still be useable or do I have to choose “Disable Driver signature Enforcement” again?
Hello!
Help restore phone worked just fine before lunch Today, then switches off by itself and all. when running vibrates but does not run
.Thought battery-it whole. Display-a.
decided to restore the firmware without a battery when connecting USB Device driver Omap4430 prevailed. no more drivers do not see anywhere else!
using LG flash tool tried to recover-it does not see the phone.
using UpTest also doesn't see the phone.
Window 8 x 64
Who has encountered this problem, and I do not understand what port you need to replace
?
P.S. Head boils. sorry for my broken English
From sda171 about Windows 8:
I just wanted to add something for fellow Windows 8 users following your guide. By default, windows 8 does not allow driver which are not signed to be installed. You wont even be prompted to force install it. It will deny the installation without your knowledge (this happened to me and I had no clue). In addition to installing every app as administrator. You have to disable driver signature verification on your windows 8 computer.
To do that.
Go to PC settings > General > Under Advanced startup , click restart now > at the boot up screen click 'troubleshoot' > advanced options > startup settings > restart > then press the corresponding number to temporarily disable driver verification (it was 7 for me).
Then do all the driver installing as stated in the awesome guide. If you restart after the disabling the verification is enabled again. It works for only one boot and has to be done again if required (in case you restart after disabling). The verification has to be disabled for successful installations of the drivers u install or else it wont work for you on windows 8.
HI everyone.
anybody can help me that can windows 8.1 Enterprise Build 9431 supports MT65xx USB Drivers (MT65xx Android Driver)?
bahmandamia6982 said:
HI everyone.
anybody can help me that can windows 8.1 Enterprise Build 9431 supports MT65xx USB Drivers (MT65xx Android Driver)?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2180436
Found some working link tried this guide
http://androidurdu.net/download-mt65xx-android-drivers-windows-7-vista-xp-x86-x64-amd/
if it help tell me
Yes it does support Windows 8.1
I flashed some MT65xx devices using Windows 8.1 using SP Flash Tool
But in order to install the drivers you have to disable driver signature enforcement in Windows.
You can find numerous tutorials on the internet teaching you how to do that with pictures. Use Google
but here's an easy way :
1) Put your mouse on the upper right corner so the menu appears.
2) Choose Settings.
3) While holding the SHIFT button on your keyboard , use your mouse to choose Power then Restart.
4)Choose Troubleshoot --> Advanced Options --> Startup Settings --> Restart.
5) After your computer restarts and shows you a list of options press F7 on your keyboard.
6) Wait until it boots and then install MTK drivers you can do that by connecting the device then opening device manager and clicking right click update ..choose browse ..and browse to your MTK drivers directory then click next.
I don't think he was asking for the tutorials, but for the actual drivers!
Hi Friends,
This is my first post at XDA.
I unfortunately bricked my Panasonic P81 after rooting it and adding XHalo app and the boot manager app from the Xposed Framework.
The situation is as follows-
I can get to the logo, it screams Panasonic and then doesnt boot. I dont have CWA installed and worse, my SD card which had my stock backup is also lost. This means I need a mechanism to stock recover and perhaps flash boot.img and recovery.img?
I am stuck at this point, not sure how to proceed. I can get to recovery, have cleaned cache, backed up user data ,done a factory reset. Even after factory reset it still cant boot.
Please help me with a step-by-step instruction to recover, this phone is dear to me. How do I flash?(boot.img or rom) I have downloaded Sagar Patel's (good bless him!) backup and the images, but need guidance on how to flash and recover.
Please help friends and apologies for any incovenience. I am still a newbie
Guys please help!!
Driver-USB-PC connection problem
kartik.krish said:
Guys please help!!
Click to expand...
Click to collapse
Hope drivers are installed properly in your pc.
If you are going to use sp flash tool, Make sure SP flash tool is set to auto-detect com port, not manual selection
If you find that it is driver problem, following may help you.
Please note that there is nothing that much hard in driver installation as it is just to connect your device with your pc but because many users still face problem of driver installation, you can try following tricks!!!
It is observed by me that driver installation and adb interface problem do not happen in windows XP as eventually and generally it is happened in windows 7 and later…so, you can simply try on windows xp if you are able to do so…(you can use dual operating system too!!! Or good relation with neighbor/friends/colleagues/someone/all can be beneficial here!!!)
Note that all tricks here are not necessary to work, but it may still work for you….
Take one by one step, if the first step does not work for you, only then try next step. This is not all steps to be taken at once type guide…This is simply Try and error type tutorial/tricks…
There are following problems I have come to know regarding to driver installation and conflicts:-
Device is charging through usb cable but there is no usb option displaying on either device or no driver installation box/message/pop up appears in pc….
Missing sound of that usb-pc connection
Sound of disconnection after couple of seconds of connection
Adb interface is missing
Ok, sometimes changing usb connection type for example, from mass storage or mtp to camera, ptp, usb tethering or something else can bring adb interface…..
Try with different USB Cable. You can use original nokia or samsung tiny cable instead of cable having long length. Sometimes, length matters!!!!
Try in different USB Port.
Sometimes, you have to disable signature verification in your pc for proper installation of driver.
Had you disabled your antivirus before downloading, installing and while running your tools/softwares? You may need to do so…
Have you installed the software (or say, all associated softwares/tools) in C-System drive?, if not, then you should first install required software/tools in system drive that is usually C drive in Microsoft-Windows OS…or try after installing them on desktop.
Keep all necessary files/tools (driver files, flash tools, rom etc…) on desktop.
Download proper driver According to your model/device, According to chipset inside, According to Official site of manufacturer, Official site of chipset, through PC Suite/flash program of your device…
If the problem still not solve, you should try all available driver packages of your device one by one whether from official site of chipset inside your device, or any forum, adb, pdanet+ or foxfi, universal driver, VCOM Port driver, drivers from hexamob through play store, and find all possible packages and see if someone make positive result after installation…
If the problem still not solve, you should install remaining update packages of your system (PC) including all primary, secondary, essential, Non-essential updates….whatever, just install them all….reboot your pc…and see if problem is solved….
If you can connect the device but somehow found that device driver still not installed properly, just go to device manager in your pc, click on portable device, right click on your device and apply “Update driver”. Click on “automatically search” when a window prompt ask you.
If the problem still persists then,
Just remove all the drivers using usbdeview (I have given link also to download usbdeview in earlier post)
https://drive.google.com/folderview?id=0B511A2txfpAPbmwtQXZqbnVlT1U&usp=sharing
Install usbdeview and remove all the drivers
You can also fix this by showing the nonpresent devices in devicemanagement (google for show nonpresent devices for explanation)
Go to com ports, and delete all mediatek drivers except preloader driver. Now start over. It can help if you choose the same usb port where you had success last time.
Use Usbdeview to uninstall all the drivers before connection, restart the pc, Extract and keep driver zip files and other useful files/tools on desktop…just start your tool… and try to perform your tasks like backup…or restoring the backup…without worrying about that sound of disconnection you may listened after couple of seconds of connection or don’t even worry if you are just missing that sound of usb-pc connection….just try on your tool…
If still problem of driver installation persists, then simply use usbdeview and uninstall all drivers, restart your pc and try following steps:-
There are various ways to install proper drivers at the time of connecting the device with pc depending upon how you connect it.
Follow the procedure both with and without battery
Simply plug in via USB Cable
Connect by holding volume down button
Connect by holding volume up button
Connect by holding Power button
Connect by holding power and volume down
Connect by holding power and volume up
Connect by holding both volume up and down button
Connect by holding thrice volume up, down and power button
Connect by holding power and home button
Connect by holding power and menu button
Remember which method works and which drivers are installed
in LAN-Devices you may have different android device
Select/set drivers by hand and use the mtk usb driver, now Flashtool finds the phone
Suppose holding volume down method without battery works for you then what next you have to do is as below:-
1.TAKE THE BATTERY ,SD ,SIM OUT OF THE PHONE
2.HOLDING VOLUME DOWN CONNECT IT TO PC VIA USB(ONCE YOU HEAR A SOUND FROM PC YOU CAN RELEASE VOLUME DOWN)
3.OPEN DEVICE MANAGER(ON COMPUTER SEARCH IT OR CONTROL PANEL)
4.WAIT FOR 2-3 MINUTES
5.YOU WILL HEAR A SOUND & OTHER DEVICE WILL BE DISPLAYED
6.IN OTHER DEVICES ->MT65XX PRE-LOADER
7.RIGHT CLICK MT65XX PRELOADER
8.UPDATE DRIVER
9.LOCATE THE DRIVERS PROVIDED ACCORDING TO YOUR OS(VISTA,WIN7,XP)
10.IT WILL DO ITS STUFF
Install Mediatek drivers, preloaders, VCOM port etc…
Manually Install MediaTek USB VCOM Drivers
Requirement:-
1. Download MediaTek USB VCOM Drivers
2. Download USBDeview
Here is the link from you can get it:-
https://drive.google.com/folderview?id=0B511A2txfpAPbmwtQXZqbnVlT1U&usp=sharing
Procedure
(* Note: You might need to disable drivers signature verification in Windows for this to work smoothly.
If you want to turn off device driver signing in Windows completely, do the following.
Windows 7:-
1. Hit the Win+R keys together to open the run dialog
2. Type gpedit.msc to open the local groups policy
editor
3. Expand ‘Administrative Templates’ (it’s under ‘User Configuration’)
4. Expand ‘System’. Click ‘driver Installation’
5. In the right panel, double click on ‘Code Signing for Device Drivers’
6. Choose ‘Enabled’ in the window that appears.
7. In the underlying options, choose ‘Ignore’
8. This disables drivers signing in Windows 7, and now you can install unsigned drivers in Windows 7.
9. Click Apply, OK. Restart your computer to install unsigned drivers
Windows 8
1. Hold down the Windows key on your keyboard and press the letter C to open the Charm menu, then click the gear icon (Settings)
2. Click More PC Settings
3. Click General
4. Under Advanced Startup, click Restart Now
Note: In Windows 8.1, the ‘Restart Now’ button has moved to ‘PC Setting -> Update & Recovery -> Recovery.’
5. After restarting, click Troubleshoot
6. Click advanced options
7. Click Windows Startup Settings
8. Click Restart
9. After restarting your computer a second time,
choose Disable driver signature enforcement
from the list by typing the number 7 on your Keyboard Your computer will restart automatically.
10. After restarting, you will be able to install
unsigned drivers normally; however, Windows
will display a warning message. When the
warning appears, click Install this driver
software anyway. )
1. Install USBDeview and use it to uninstall all Vcom, Mediatek and Preloader drivers
1b. Extract the contents of the Mediatek USB VCOM file
2. In Windows, go to Control Panel and open Device Manager
3. Click any of the device groups (any of the items on the list) you see there, and then from Action menu, select Add legacy hardware
4. Add hardware wizard will be opened, click next
5. Select Install the hardware that I manually select from a list (Advanced)
6. Click next two times and click Have Disk button
7. Click browse and find where your driver's .inf file is, then select it (the .inf you'll select is located in drivers > USB Vcom driver > your OS) . Ensure to select the 64 bit .inf if your PC is 64 bit
8. Click Open and OK. You will see the drivers listed.
9. Select your driver there (select Mediatek Preloader USB VCOM Port)
10. Click Next and finish installing
11. If SP flash tool or other software still dont detect your phone then also install Mediatek DA VCOM (consider installing more from the list of drivers one at a time if need be)
Try in different PC
Sometimes windows XP works when windows 7 fails!!!
Case:-
It did the same thing with my MT6577 (Wiko Cink PEAX), so I connected it with a battery and without holding VOL+. Then "MT65xx preloader" appeared in device manager then disappeared (once). It is normal that it disappears. When you start Flash_tool and when you click Download (or whatever you want to do) THEN you connect the phone (in off state), and the flash operation will succeed.
Guess what? Once my Panasonic P81 could install driver and got detected after approx. 5 hours of continuous connection with win 7 x64!!! Meanwhile, I tried first usbdeview and then manually installation of mediatek driver but manual installation had failed as my p81 was only charging when it was connected with pc….So, mediatek – windows 7 conflicts….but, when I tried tiny (very small) nokia usb cable, it works instantly…
If you ever meet problem when you connect your android with your pc via usb cable and find that your android is charging but could not recognize or there isn’t that options of “USB connection” then just disconnect your android, power off it, remove battery, connect it without battery with your pc through usb, let it have some time to recognize your android or hear that voice of “usb connection” you were just missing…after that, insert battery and switch on your android…you are done!!!
Sometimes removing both sim cards and battery and then re-inserting them after a couple of seconds also works.
Try with different USB Cable
Try in different USB Port
Try in different PC
Sometimes windows XP works when windows 7 fails!!!
Use usbdeview to remove all the usb devices and then add your device
Find proper driver of your device:-
https://drive.google.com/folderview?id=0B511A2txfpAPbmwtQXZqbnVlT1U&usp=sharing
panasonic p81 soft bricked
SP flash tool detected my P81 mobile
but i need rom ROM files to flash
please any one give me rom file to flash Panasonic P81 with SP flash tool
problem solved?
I also had similar problem & solved it. Tell me if the problem is no solved.
damn i don't know what the hell is going on inside my computer but i am not able to get those drivers or i don't know what's the problem. please help me where to get drivers for my panasonic p81 mobile. it is softbricked and i want to install stock rom and i have that cpb files but that ygdp tool isn't working i am in total chaos.
help me please
kartik.krish said:
Yo! I had bricked it too and that too by Xhalomulti window cuz app window is sh!t..... be cool .there is stock rom available at www.xdafirmware.com....google it....also You will recieve a .zip... extract to get .cpb file and use YGDP (assembly:: if ask for password at ygdp type 369)......tap config select cpb. Wait ...connect usb and click start........ok tutorial on Internet.... IMPORTANT THING:: YOU'LL NEED MTK VCOM DRIVER PR ELSE IT WON'T WORK.
Sent from my Panasonic P81 using XDA Labs
Click to expand...
Click to collapse
Thanks so much mate! I fixed with the help of friends at XDA. Which ROM performs best on P81 which runs L or M? I am still on stock and need to upgrade. Do you have suggestions?
kartik.krish said:
Thanks so much mate! I fixed with the help of friends at XDA. Which ROM performs best on P81 which runs L or M? I am still on stock and need to upgrade. Do you have suggestions?
Click to expand...
Click to collapse
Brother I am tired of finding any rom other than stock.on internet there is miui 6 but most people complained it damaged their devices....no cyanogen OS,Color os ,Aokp,Ressurection remix,paranoid nothing........ok i found a phone named Doogee Dagger DG550 having same spects but better ui than playmore and that recently got kitkat too. Im thinking of trying it..if it fails i've
Panasonic original (ok modded a bit) firmware i can flash from ygdp tool..... actually Panasonic P81 is nothing but clone of coolpad 7320 with cool show replaced by playmore and the gesture is new....same multiwindow and the music cafe is nothing but coolpad music renamed....literally im using 7320 rom with build. prop changed so on apps it shows im using p81........Ok if you find rom please post link..... Ps ive tried roms on www.needrom.com but is hopeless.
Sent from my Panasonic P81 using XDA Labs
---------- Post added at 04:39 AM ---------- Previous post was at 04:34 AM ----------
kartik.krish said:
Thanks so much mate! I fixed with the help of friends at XDA. Which ROM performs best on P81 which runs L or M? I am still on stock and need to upgrade. Do you have suggestions?
Click to expand...
Click to collapse
In my opinion MIUI is best because it has a self large community like xda and launch updates per month so many that you will fed up installing them.....if you download and install one update you will be amazed that it will say 3 more system updates pending......and if you complain a bug next month it got fixed.....only thing is to find one...
PS don't download the miui 6 for p81..complained by many p81 user that it hard bricked the device.
And that miui is not official i.e. some developer made his own one and DO not tested that it works or not......
Sent from my Panasonic P81 using XDA Labs
Sir,My Panasonic eluga s is soft bricked, Not starting by pressing any key..it only Starts when connected to PC or charging.. That too in Fastboot mode.. While installing stock ROM using YGDP tool,I am not able to get my mobile in download mode..pls guide..
my panasonic p81 is hard brick,it is not detecting in pc by vcom and other drivers even not booting or charging,please help me devs.
I am connecting my p81 with my sound system but now i cannot hear the voice over a call properly plzz help me out