I have Canvas Knight A350. Its recovery was working perfectly fine before but i flashed some custom roms i am not able to boot into recovery mode using the three keys Volume Up + Volume Down + Power Button. On pressing the three keys simultaneously my phone starts powering on rather than showing the menu which asks for pressing down button for factory mode and up button for recovery. But using MTK Droid Tools i can easily reboot into recovery by using its option to reboot into recovery. I tried Formatting the whole flash with bootloader and then again flashing the rom but the problem still persists. Please Help.
Hi there,
I'm sorry but I founded only this general threads about your device where you can post/ask :
[ALL IN ONE]Micromax Canvas Knight A350 Aka Canvas 6
Good luck
Related
DOMO N9SE is a variant of Ployer Momo9 and Micromax Funbook ia also a variant of Ployer Momo9. Micromax funbook roms found on this forum can be successfully installed using CWM recovery but the touchscrren is not working. I AM trying to port such roms to work on DOMO N9SE. I am not a developer of ROMs. I am just porting the ROMS found to work on my device. This Rom is the port of
[ROM] Fun Series v3.0 - Custom Rom for Micromax Funbook ICS 4.0.3 [20.06.2012]
Download DOMO Fun Seriesv3.0
The default screen is in fullscreen mode where you will not find the status bar(good for those who want to use the tab as kiosk). to get the status bar back go to Settings->Display->Full Screen Mode and select Normal Screen Mode.
CWM Recovery can be installed using the method found here. First time boot into recovery using the option in the Nova tools.
To boot into recovery ( first time boot use Nova tools ), power off the tablet. press back(ESC) button and with the back(ESC) button pressed connect the usb cable connected to PC. Keep the back(ESC) button pressed and you will boot into cwm recovery.
You have to adapt yourself to use CWM Recovery as the up(Menu) key doesnt work and you cannot come back to the main menu from the sub menu. After booting into recovery press the back(ESC) button continuously till the text "Back menu button enabled" is displayed at the bottom of the screen. Now you can come out of a sub menu by selecting "+++++Go Back++++++"
hello friends,
i,m using Micromax canvas lite A92.........Today when phone suddenly goes rebooted n stuck on Canvas Logo.
what i done:
1) Remove the battery , put it again n restarted the phone...but phone stuck on Canvas Logo , white screen is flashed n then stuck on Canvas logo and same thing repeats.
2) Again remove the battery n put it back, Presss Power + Vol up + vol down to get into recovery mode, i got 2 options 1 one for recovery mode n 2 for factory mode....but when i selected any using vol up/down button, the phone again stuck at canvas logo n i cant enter into recovery mode.
my phone is not rooted too....n i ,m also unable to do factory reset as reocvery mode is not working for me..
Guys pls help.......what can i do now.........i need urgent help of yours..
thanx in advance...
just flash the stockrom
flash using sp tool
niftysid said:
hello friends,
i,m using Micromax canvas lite A92.........Today when phone suddenly goes rebooted n stuck on Canvas Logo.
what i done:
1) Remove the battery , put it again n restarted the phone...but phone stuck on Canvas Logo , white screen is flashed n then stuck on Canvas logo and same thing repeats.
2) Again remove the battery n put it back, Presss Power + Vol up + vol down to get into recovery mode, i got 2 options 1 one for recovery mode n 2 for factory mode....but when i selected any using vol up/down button, the phone again stuck at canvas logo n i cant enter into recovery mode.
my phone is not rooted too....n i ,m also unable to do factory reset as reocvery mode is not working for me..
Guys pls help.......what can i do now.........i need urgent help of yours..
thanx in advance...
Click to expand...
Click to collapse
Flash ur phone using sp flash tool. find stock rom on www[.]needrom[.]com
or find on xda for pre rooted rom.
this will definitely help u.
it means your phone is bricked and hang at bootloop so the soluton is
is to flash rom using sp flash tool
you need 2 software
1)sp flash tool
2)mtk drivers
if u want me to reply a full tutorial u can tell me coz i have no much time
or ucan watch turials in youtube
as searching"how to flash rom in micromax 98"
and i think that you have to tell me more about what happen that time or which software u were installing etc
feel free to reply me
niftysid said:
hello friends,
i,m using Micromax canvas lite A92.........Today when phone suddenly goes rebooted n stuck on Canvas Logo.
what i done:
1) Remove the battery , put it again n restarted the phone...but phone stuck on Canvas Logo , white screen is flashed n then stuck on Canvas logo and same thing repeats.
2) Again remove the battery n put it back, Presss Power + Vol up + vol down to get into recovery mode, i got 2 options 1 one for recovery mode n 2 for factory mode....but when i selected any using vol up/down button, the phone again stuck at canvas logo n i cant enter into recovery mode.
my phone is not rooted too....n i ,m also unable to do factory reset as reocvery mode is not working for me..
Guys pls help.......what can i do now.........i need urgent help of yours..
thanx in advance...
Click to expand...
Click to collapse
If you have any nandroid backup you can flash it or take it from anyone else. For this you would have to install Clackwork Mod Recovery.
You can also flash the stock rom using the SP Flash Tool.
My canvas lite A92 Bluetooth n wifi not working.... means not switching on
..
What can i do??
Sent from my Micromax A110 using XDA Premium 4 mobile app
Flash the stock rom by sp tool software...
Sent from my Micromax A92 using XDA Premium 4 mobile app
Stuck at logo
ganeshyemul said:
Flash ur phone using sp flash tool. find stock rom on www[.]needrom[.]com
or find on xda for pre rooted rom.
this will definitely help u.
Click to expand...
Click to collapse
You may also try some custom ROM. Good ones are available in XDA
Hello everyone,
I have Micromax A110 canvas 2, or the cynus t2 phone.
I recently rooted my phone, and sucessifuly instaled LegoIce Fusion V3 custom rom and CWM recovery.
It worked perfectly for like 3 weeks.
Yesterday i changed my screen lock pattern, and shut down a phone to check out something in recovery mode.
I pressed volume +,- and power button, pressed volume up for recovery mode when i got promted, just like always, but this time android image appeared and looks like formatted my phone.
Phone didnt get into recovery mode, but instead it restarted and booted back into android. What i saw than is that
all my apps were deleted.
I tried to restart phone again, but this time it just stucked on booting.
Only logo appears, but one thing i think is important to mention is that now it shows stock boot logo "ANDROID" and it should show "SAMSUNG" logo as i instaled custom rom.
I tried couple more times to boot into android, but i failed. Than i decided to boot into recovery mode, but when i press Volume +,- and power button and pres volume up for recovey my phone just restarts and tries to boot in android.
So right now i can't access android, nor i can access recovery mode to flash rom again.
I ran out of ideas, so any advice will be appreciated.
Nikola99603 said:
Hello everyone,
I have Micromax A110 canvas 2, or the cynus t2 phone.
I recently rooted my phone, and sucessifuly instaled LegoIce Fusion V3 custom rom and CWM recovery.
It worked perfectly for like 3 weeks.
Yesterday i changed my screen lock pattern, and shut down a phone to check out something in recovery mode.
I pressed volume +,- and power button, pressed volume up for recovery mode when i got promted, just like always, but this time android image appeared and looks like formatted my phone.
Phone didnt get into recovery mode, but instead it restarted and booted back into android. What i saw than is that
all my apps were deleted.
I tried to restart phone again, but this time it just stucked on booting.
Only logo appears, but one thing i think is important to mention is that now it shows stock boot logo "ANDROID" and it should show "SAMSUNG" logo as i instaled custom rom.
I tried couple more times to boot into android, but i failed. Than i decided to boot into recovery mode, but when i press Volume +,- and power button and pres volume up for recovey my phone just restarts and tries to boot in android.
So right now i can't access android, nor i can access recovery mode to flash rom again.
I ran out of ideas, so any advice will be appreciated.
Click to expand...
Click to collapse
1st .
if you have computer use sp tool flashing ....you can flash CWM via SPtool which requires computer .....i think this will going to reset your recovery mode ....then you can flash rom in your mobile ..
2nd .
you can directly flash rom via sptool . there are so many tutorials available regarding a110 device on xda . only choose your device you will get all available contents regarding your device ..
I
Nikola99603 said:
Hello everyone,
I have Micromax A110 canvas 2, or the cynus t2 phone.
I recently rooted my phone, and sucessifuly instaled LegoIce Fusion V3 custom rom and CWM recovery.
It worked perfectly for like 3 weeks.
Yesterday i changed my screen lock pattern, and shut down a phone to check out something in recovery mode.
I pressed volume +,- and power button, pressed volume up for recovery mode when i got promted, just like always, but this time android image appeared and looks like formatted my phone.
Phone didnt get into recovery mode, but instead it restarted and booted back into android. What i saw than is that
all my apps were deleted.
I tried to restart phone again, but this time it just stucked on booting.
Only logo appears, but one thing i think is important to mention is that now it shows stock boot logo "ANDROID" and it should show "SAMSUNG" logo as i instaled custom rom.
I tried couple more times to boot into android, but i failed. Than i decided to boot into recovery mode, but when i press Volume +,- and power button and pres volume up for recovey my phone just restarts and tries to boot in android.
So right now i can't access android, nor i can access recovery mode to flash rom again.
I ran out of ideas, so any advice will be appreciated.
Click to expand...
Click to collapse
Help me same issue facing tried to reflash cwmr by sp flash tools then also not able to access recovery installed ib phoneix v4 working very well but need to update one patch.
Sent from my A110 using XDA Free mobile app
unable to boot in recovery mode in micromax a110
kindly check thread
http://forum.xda-developers.com/showthread.php?t=2201689&page=2
I have Canvas Knight A350. Its recovery was working perfectly fine before but i flashed some custom roms i am not able to boot into recovery mode using the three keys Volume Up + Volume Down + Power Button. On pressing the three keys simultaneously my phone starts powering on rather than showing the menu which asks for pressing down button for factory mode and up button for recovery. But using MTK Droid Tools i can easily reboot into recovery by using its option to reboot into recovery. I tried Formatting the whole flash with bootloader and then again flashing the rom but the problem still persists. Please Help.
Hi,
I see that you have already found other sections in which to post your questions.
Please continue your journey there
Good luck!
Hi,
I have flashed my Micromax A106 Unite 2 with custom recovery image using terminal emulator and later flashed the device using SP Flash Tool. Now I'am unable to hit the recovery mode, as when I try hitting recovery mode by pressing (Volup+Power button) at a time nor even turn on my phone normally(it doesn't come out of loop at all), which keeps on displaying the micromax and android screen and later keeps on rebooting (Boot loop). Can anyone pull me out of this problem?
Thanks,