[Completed] [Q] Mobile got off during Installation of Lollipop Custom ROM In spice mi 509 mobile - XDA Assist

I was working on my spice mi 509 mobile trying to install Lollipop ROM by following the instruction step by step I was in the boot menu only and hadn't even started installation when suddenly the mobile went off. I thought that my battery might have gone down but when I plugged it in it did not restart. Even after charging for hours I tried to switch it on but failed. I don't know what had happened to my mobile. I want to know what should I do. I tried doing hard reset but of no use. I also tried Flashtool to recover but it generates error something like "DA was unable to send Response".... Please guide me ..
Please help me... I am in very high tension...
Also , i didn't took backup of my ROM before installing lollipop...
Please reply me on ma email as soon as possible and help me.. :crying:

Hi,
Thanks for using XDA Assist Please post here Android Q&A, Help & Troubleshooting
Good Luck!

Related

[Completed] My Yoga2 1050L Tablet Freezes On Start

I have Yoga Tablet 2 1050L I Got A Lolipop Update I Tried To Update It Now The Tablet IF I powered It Normally Gives Me A Black Screen After The Android Word
And If Powered To go To The Fast Boot It Freezes On Fastboot Starting Words
I Have Tried Alot But No Solution Please Help Me
I Need To Flash The Original Rom
Or Get Any Android On IT
XDA Visitor said:
I have Yoga Tablet 2 1050L I Got A Lolipop Update I Tried To Update It Now The Tablet IF I powered It Normally Gives Me A Black Screen After The Android Word
And If Powered To go To The Fast Boot It Freezes On Fastboot Starting Words
I Have Tried Alot But No Solution Please Help Me
I Need To Flash The Original Rom
Or Get Any Android On IT
Click to expand...
Click to collapse
Hi, thanks for using XDA assist!
First, please create an account so you can post in other forums.
Here are some threads for your device that may help you:
http://forum.xda-developers.com/thinkpad-tablet/general
After creating your account, you can ask for further assistance here:
http://forum.xda-developers.com/showthread.php?t=2257421
Good luck!

[Completed] olegario dia

Hey eveyrone i have a problem with my alcatel ot-991.I rooted before two days and deleted some app one of them i think that had a name like jada or something today i tried to factory restore my phone and when it comes to first setup after i complete the steps an error hops to the screen says com.jrdcom.JrdSetupWizard had to stop and i press force close and it takes me back to 1st step what can i do???did i destroyed my phone ? :/ some one plz help me can i reinstall alcatel ot-991 stock os or something ?
XDA Visitor said:
Hey eveyrone i have a problem with my alcatel ot-991.I rooted before two days and deleted some app one of them i think that had a name like jada or something today i tried to factory restore my phone and when it comes to first setup after i complete the steps an error hops to the screen says com.jrdcom.JrdSetupWizard had to stop and i press force close and it takes me back to 1st step what can i do???did i destroyed my phone ? :/ some one plz help me can i reinstall alcatel ot-991 stock os or something ?
Click to expand...
Click to collapse
Hi, thanks for using XDA Assist!
First, please create an account so you can post in other forums.
After creating your account, please post your question here:
http://forum.xda-developers.com/android/help
There's no specific forum for your device, however the thread I'm directing you to is filled with expert advice.
Good luck!

[Completed] Bricked gionee e3 showing broom error enable dram fail 4032 need urgent help

Hello guys plz help me im in big trouble im using gionee e3 with xperia custom rom from xda developers. everything was going fine untill i spilled some water on my phone.first the display gone white and then switched off automatically i tried to turn it on but its not swithing on at all.I opened it gave it some heat to dry but this dosent work.Everything in the circuit board look fine so i guess it might be some software issue.so I tried to reinstall the stock rom using sp flash tool but its saying BROOM ERROR ENABLE DRAM FAIL (4032). Ive tried every methods but nothing seems to work.
Plz help me guys.
XDA Visitor said:
Hello guys plz help me im in big trouble im using gionee e3 with xperia custom rom from xda developers. everything was going fine untill i spilled some water on my phone.first the display gone white and then switched off automatically i tried to turn it on but its not swithing on at all.I opened it gave it some heat to dry but this dosent work.Everything in the circuit board look fine so i guess it might be some software issue.so I tried to reinstall the stock rom using sp flash tool but its saying BROOM ERROR ENABLE DRAM FAIL (4032). Ive tried every methods but nothing seems to work.
Plz help me guys.
Click to expand...
Click to collapse
Hello, and welcome to XDA!
Sounds like a hardware fail to me. Water damage does not have to be visible (scorching happens way more often if there was salt in the water). You will need warranty work at this point.
If you need a second opinion, you can try this thread (once you have registered for an XDA account):
> Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Q&A] Gionee elife e3 development - root, cwm , roms , nadroid backup explained in
Hope this helps, and good luck!

[Completed] guys please help

i have a lenovo a 3500 HV tablet , and its rooted , its stuck on the logo screen and dont wanna turn on , i cant go to the factory reset even i tried the small botun under the cover it restarts it but it stops on the logo screen again , please help me , and there is castum rooms for it like the lolli pop rome but i cant download it cuz it requires serves , and in my country i cant do serves , if any one can get me a direct link and tell me how to install it that will be good , thanks any way
You_got_phone said:
Look for an ifixit page called Technique:*How to flash stock ROM - Jelly Bean / KitKat Lenovo A3500
That should fix your problem
Click to expand...
Click to collapse
thanks but what about the lollipop rom do u know how can i get it ?????
Hi,
Try posting your question here:
Android Q&A, Help & Troubleshooting
The experts there may be able to help.
Good luck!

[Completed] Accidentally formatted my intex aqua 3g phone using sp flash tool! help needed

Hi guys, my name is Theophilus John
I own a Intex Aqua 3g. Recently i rooted my phone and accidentally removed the phone app. in order to get that back i decided to get the stock rom of the phone and install it. But i failed as i formatted it and now when i try the download only option on the sp flash tool nothing is working it would show download DA(100%) in red. Choosing other option such as format or upgrade wont work either.
I seriously need the phone to be restored.
For this purpose I request your esteemed assistance.
Please help!
Yours
Theophilus
theophilus1234 said:
Hi guys, my name is Theophilus John
I own a Intex Aqua 3g. Recently i rooted my phone and accidentally removed the phone app. in order to get that back i decided to get the stock rom of the phone and install it. But i failed as i formatted it and now when i try the download only option on the sp flash tool nothing is working it would show download DA(100%) in red. Choosing other option such as format or upgrade wont work either.
I seriously need the phone to be restored.
For this purpose I request your esteemed assistance.
Please help!
Yours
Theophilus
Click to expand...
Click to collapse
Hi Theophilus
Thank you for using XDA Assist
As we do not have an specific forum dedicated for your device yet, our experts at the below forum should be able to help you. Please be welcome to post over in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.

Categories

Resources