[Q] TWRP Flashing a Zip, but nothing happens. - Galaxy S6 Q&A, Help & Troubleshooting

Hey guys,
i got a little problem with my TWRP.
Galaxy S6, Android 5.0.2
TWRP v2.8.7.1
i noticed it when i tried to install the Camera Mod.
I tried flashing the zip, using TWRP.
It said, that the flashing was done succesfully, but nothing happened. I also tried it with anothter zip file, but still no change.
The folders which should have been changed doesn't show a change in the last changed dates etc.
anyone has an Idea?

Redownload the flashable camera mod and flash again.

still the same :/

Tim Niklas said:
still the same :/
Click to expand...
Click to collapse
Actually it happened with me to using the Camera Mod. I thought all was ok. Flashed again and my camera disappeared since the mod cant be use for G9200 dual sim phones. Strange. But i have no issues installing any other zip file.

Flash 5.1.1 stock ROM instead via odin. Camera might be better than mod.

roydok said:
Flash 5.1.1 stock ROM instead via odin. Camera might be better than mod.
Click to expand...
Click to collapse
is that true ? i'ver never read in a changelog, that they increased the camera quality...
and with 5.1.1, is there a working root without flashing a different kernel?

http://www.sammobile.com/2015/06/21/galaxy-s6-and-s6-edge-android-5-1-update-does-bring-raw-support-and-lower-iso-values-after-all/

roydok said:
http://www.sammobile.com/2015/06/21/galaxy-s6-and-s6-edge-android-5-1-update-does-bring-raw-support-and-lower-iso-values-after-all/
Click to expand...
Click to collapse
yeah, but what about the compression etc ?

Have not yet explored all features but its recognized that the 5.1.1 camera is better than the 5.0.2.

Related

[Q] Xperia L recovery problems.

I am currently new to xperia l. I unlocked the bootloader and installed cwm, twrp and philz recovery but none of them seems to be able to flash ANY files. I've checked all the zips. I can't install cm11 directly, i have to extract the boot.img, flash it and then only flash cm11 ROM. All of the recoveries gives me e: can't install xxxxx.zip (bad) and other errors even with the cm11 zip now i have flashed and is working. What should i know? What am i doing wrong? Please help.
snj12341 said:
I am currently new to xperia l. I unlocked the bootloader and installed cwm, twrp and philz recovery but none of them seems to be able to flash ANY files. I've checked all the zips. I can't install cm11 directly, i have to extract the boot.img, flash it and then only flash cm11 ROM. All of the recoveries gives me e: can't install xxxxx.zip (bad) and other errors even with the cm11 zip now i have flashed and is working. What should i know? What am i doing wrong? Please help.
Click to expand...
Click to collapse
Which kernel did you flash first?
using Canon 1DX
rethinkk said:
Which kernel did you flash first?
using Canon 1DX
Click to expand...
Click to collapse
Ok, I figured the problem but I have a new problem. When I try to send any files, movies, music, roms, etc to my phone, the files are all broken. When i put cm11, i got errors saying device not responding. I have to restart my phone to send new files and i cannot send large files.
snj12341 said:
Ok, I figured the problem but I have a new problem. When I try to send any files, movies, music, roms, etc to my phone, the files are all broken. When i put cm11, i got errors saying device not responding. I have to restart my phone to send new files and i cannot send large files.
Click to expand...
Click to collapse
well,first flash stock ftf and then again flash new rom bro (full wipe- cache)
using Canon 1DX
rethinkk said:
well,first flash stock ftf and then again flash new rom bro (full wipe- cache)
using Canon 1DX
Click to expand...
Click to collapse
Could this be a hardware problem?
I dont think so, your sistem files may be damaged but first flash stock firmware then we will see what happened
using Canon 1DX
rethinkk said:
I dont think so, your sistem files may be damaged but first flash stock firmware then we will see what happened
using Canon 1DX
Click to expand...
Click to collapse
i did reflash stock rom 2 times but i still get the error. what could possibly cause this problem, drivers, usb port or usb cable? I was using xperia m before but had no problems.
rethinkk said:
I dont think so, your sistem files may be damaged but first flash stock firmware then we will see what happened
using Canon 1DX
Click to expand...
Click to collapse
Thank you, i now switched to MSC and testing. I think it works but i also think the files i copy get broken on the way to the phone.
try to re-install driver in your pc. and for me, i always full-wipe my device first before i flash to custom rom.. maybe you should try it too..
by the way, why dont you try to download again these rom? just to make sure.

Unable to update to 12.1

So today I saw that the 12.1 update is downloaded and asking me to install it. But, when I do try installing it the screen is stuck at the Cyanogen Recovery.
The usual options in recovery screen are displayed, why isn't the OS updating?
FYI - My OPO is rooted and also has TWRP recovery installed. I also tried disabling the Update Cyanogen Recovery option but the same option.
Any assistance would be great
SagarRox said:
So today I saw that the 12.1 update is downloaded and asking me to install it. But, when I do try installing it the screen is stuck at the Cyanogen Recovery.
The usual options in recovery screen are displayed, why isn't the OS updating?
FYI - My OPO is rooted and also has TWRP recovery installed. I also tried disabling the Update Cyanogen Recovery option but the same option.
Any assistance would be great
Click to expand...
Click to collapse
You can't flash the OTA with TWRP recovery. You can either flash the stock recovery and then install the OTA, or you can download the full ROM zip and flash that with TWRP.
Heisenberg said:
You can't flash the OTA with TWRP recovery. You can either flash the stock recovery and then install the OTA, or you can download the full ROM zip and flash that with TWRP.
Click to expand...
Click to collapse
Heisen
Sorry, a little question (and sorry to the OP)
Ive try to install the ota manually (i was rooted with twrp) flashing back the cm recovery, but it doesnt work still.
So ive flash the twrp 2.8.6 (for the baseband not installing prolems) and downloaded the full rom file, flashed in twrp without any wipes... Its all ok now, should i have problems with this method?
The baseband is 241,is correct?
Thx for helping
L.
lollaz said:
Heisen
Sorry, a little question (and sorry to the OP)
Ive try to install the ota manually (i was rooted with twrp) flashing back the cm recovery, but it doesnt work still.
So ive flash the twrp 2.8.6 (for the baseband not installing prolems) and downloaded the full rom file, flashed in twrp without any wipes... Its all ok now, should i have problems with this method?
The baseband is 241,is correct?
Thx for helping
L.
Click to expand...
Click to collapse
You shouldn't have any issues.
Heisenberg said:
You shouldn't have any issues.
Click to expand...
Click to collapse
Hi,
I am facing the same issue while updating the official update. I tried updating using the Cyanogen recovery but it is giving a failed error: "Unable to open the zip file" something like this. i have downloaded the 305 Mb update again manually but of no use.
Please help on this.
TIA
Nav07 said:
Hi,
I am facing the same issue while updating the official update. I tried updating using the Cyanogen recovery but it is giving a failed error: "Unable to open the zip file" something like this. i have downloaded the 305 Mb update again manually but of no use.
Please help on this.
TIA
Click to expand...
Click to collapse
Are you currently on the build directly before this one?
Heisenberg said:
Are you currently on the build directly before this one?
Click to expand...
Click to collapse
Dear, i am frankly not a techie. I am using the stock (default) RAM only. Would be great if you can help on this
Nav07 said:
Dear, i am frankly not a techie. I am using the stock (default) RAM only. Would be great if you can help on this
Click to expand...
Click to collapse
You don't need to be a techie to know that the updates must be taken in order. Go to Settings>About Phone, take screenshots of the info there and post here so I can see please.
Heisenberg said:
You don't need to be a techie to know that the updates must be taken in order. Go to Settings>About Phone, take screenshots of the info there and post here so I can see please.
Click to expand...
Click to collapse
Currently the Cyanogen version is 12.0-YNG1TAS2I3, OS version is 5.0.2, Build number is LRX22G
Nav07 said:
Currently the Cyanogen version is 12.0-YNG1TAS2I3, OS version is 5.0.2, Build number is LRX22G
Click to expand...
Click to collapse
You're on the right version. The zip must be getting corrupt during the download or something.
Heisenberg said:
You're on the right version. The zip must be getting corrupt during the download or something.
Click to expand...
Click to collapse
I have manually downloaded the zip file again apart from the Official update but it is still not getting through
Can anything else be done on this?
Nav07 said:
I have manually downloaded the zip file again apart from the Official update but it is still not getting through
Can anything else be done on this?
Click to expand...
Click to collapse
Try downloading the full zip from here:
https://www.androidfilehost.com/?fid=24052804347802356
Flash that with recovery.

Problem with network

Hi all.
I bought galaxy s6 last week with android 5.1 (Network was still working). Next day I flashed stock android 6 with odin and then I flashed recovery, I rooted, flashed new modem and I installed Pure stock extra lite ROM. All worked, except network.. I can see that I have signal but when I try to call someone it shows "Not registered on network". So I try to flash new Alexis ROM with new bootloader (Hacker bootloader) but it isn't better and problem is still here. Anybody know what to do with this problem? Maybe try to install stock android rom with odin? I would be really greatful if anybody can help me..
Umm use Smart Switch it requires your device model and S/N can be found on the box
Sent from my SM-G920F using XDA-Developers mobile app
ahmadaboshah5 said:
Umm use Smart Switch it requires your device model and S/N can be found on the box
Sent from my SM-G920F using XDA-Developers mobile app
Click to expand...
Click to collapse
Ok. Thanks. I will try it
EDIT: And what I have to do with smart switch? I don't want to back up or restore my files I only want to repair my problem with network..
Mlopik said:
Ok. Thanks. I will try it
EDIT: And what I have to do with smart switch? I don't want to back up or restore my files I only want to repair my problem with network..
Click to expand...
Click to collapse
Aha, restore your firmware through 'emergency recovery' google or youtube it for instructions.
= Emergency Recovery Smart Switch for *Galaxy S6* if necessary <
EDIT: Oh your network.. I'm afraid I just can tell you to do what I told you to fix it..
It will bring you back to stock Android 6 then root it..
EDIT2: Do what I told you and repeat all the steps you done:
Root and download the ROM but don't flash any modem cuz it will bring you back to the current problem.
Remember, no modems.
Sent from my SM-G920F using XDA-Developers mobile app
Is your IMEI still ok?
I made instructions on how to use Smart Switch here:
http://forum.xda-developers.com/galaxy-s6/help/how-to-smart-switch-emergency-t3383448
but it will revert you back to stock fw.
Check your IMEI/sn with *#06#
If you get IMEI null, or 3500000000006, you will have to rewrite IMEI with a box, and before that Smart Switch initialization won`t help.
ahmadaboshah5 said:
Aha, restore your firmware through 'emergency recovery' google or youtube it for instructions.
= Emergency Recovery Smart Switch for *Galaxy S6* if necessary <
EDIT: Oh your network.. I'm afraid I just can tell you to do what I told you to fix it..
It will bring you back to stock Android 6 then root it..
EDIT2: Do what I told you and repeat all the steps you done:
Root and download the ROM but don't flash any modem cuz it will bring you back to the current problem.
Remember, no modems.
Sent from my SM-G920F using XDA-Developers mobile app
Click to expand...
Click to collapse
So I did it and after Smart switch installed the rom it restarted and screen "Device doesn't have DRK"
EDIT: Now it boots to recovery and there it writes: "Device does not have DRK (Device Root Key), contact to SW PL. Please flash ENG binary then install DRK".
Does anybody know what to do with this?
EDIT2: So I found this video (https://www.youtube.com/watch?v=TSNbHvJdTk4) and I flashed space x kernel and it boots but it didn't solve the problem which I had.. still I can't make any call or sms.. Btw my IMEI is still same and it's fine.
EDIT3: It manually found networks but I can't connect.
Mlopik said:
So I did it and after Smart switch installed the rom it restarted and screen "Device doesn't have DRK"
EDIT: Now it boots to recovery and there it writes: "Device does not have DRK (Device Root Key), contact to SW PL. Please flash ENG binary then install DRK".
Does anybody know what to do with this?
EDIT2: So I found this video (https://www.youtube.com/watch?v=TSNbHvJdTk4) and I flashed space x kernel and it boots but it didn't solve the problem which I had.. still I can't make any call or sms.. Btw my IMEI is still same and it's fine.
EDIT3: It manually found networks but I can't connect.
Click to expand...
Click to collapse
That's weird.
Try to flash the ROM through Odin, grab it from SamMobile. Choose the correct model and region.
Tell me what happens.
Sent from my SM-G920F using XDA-Developers mobile app
ahmadaboshah5 said:
That's weird.
Try to flash the ROM through Odin, grab it from SamMobile. Choose the correct model and region.
Tell me what happens.
Sent from my SM-G920F using XDA-Developers mobile app
Click to expand...
Click to collapse
Same after installation I have to also flash space x kernel (like in this video because it wouldn't boot https://www.youtube.com/watch?v=TSNbHvJdTk4) but network still doesn't work :'( I also tried other sim but this wasn't working too.
Mlopik said:
Same after installation I have to also flash space x kernel (like in this video because it wouldn't boot https://www.youtube.com/watch?v=TSNbHvJdTk4) but network still doesn't work :'( I also tried other sim but this wasn't working too.
Click to expand...
Click to collapse
Do you have an old backup you can use?
Sent from my Galaxy S6 (SM-G920F) running XtreStoLite 3.3.1 & Hacker Kernel.
ahmadaboshah5 said:
Do you have an old backup you can use?
Sent from my Galaxy S6 (SM-G920F) running XtreStoLite 3.3.1 & Hacker Kernel.
Click to expand...
Click to collapse
No
Can I do something else or is my phone definitely lost?
Mlopik said:
No
Can I do something else or is my phone definitely lost?
Click to expand...
Click to collapse
Hi Mlopik,
No your phone is not lost you just need to flash the modem you had before dealing with that problem.
Was the modem you flashed in the Aroma installer?
Sent from my Galaxy S6 running XtreStoLite 3.3.1 and Hacker Kernel.
TheLegend975 said:
Hi Mlopik,
No your phone is not lost you just need to flash the modem you had before dealing with that problem.
Was the modem you flashed in the Aroma installer?
Sent from my Galaxy S6 running XtreStoLite 3.3.1 and Hacker Kernel.
Click to expand...
Click to collapse
No. I flashed this like it was in guide of installation on pure stock extra lite rom. https://www.androidfilehost.com/?w=files&flid=50807 I flashed "G920FXXU3DPAD_MODEM.tar.md5"
Mlopik said:
No. I flashed this like it was in guide of installation on pure stock extra lite rom. https://www.androidfilehost.com/?w=files&flid=50807 I flashed "G920FXXU3DPAD_MODEM.tar.md5"
Click to expand...
Click to collapse
I see.
So you flashed a modem you didn't have to use.
Usually using Smart Switch works and gets everything back as usual.
Please wait until someone knows about modems come.
Again, your phone is not lost, have patience and good luck.
Sent from my Galaxy S6 running XtreStoLite 3.3.1 and Hacker Kernel.
TheLegend975 said:
I see.
So you flashed a modem you didn't have to use.
Usually using Smart Switch works and gets everything back as usual.
Please wait until someone knows about modems come.
Again, your phone is not lost, have patience and good luck.
Sent from my Galaxy S6 running XtreStoLite 3.3.1 and Hacker Kernel.
Click to expand...
Click to collapse
Thanks.. so maybe flash of some of these modems will maybe works.. If I would know which is stock I would be realy happy. Maybe someone will know it.. Anyway thank you for advise.
Mlopik said:
Thanks.. so maybe flash of some of these modems will maybe works.. If I would know which is stock I would be realy happy. Maybe someone will know it.. Anyway thank you for advise.
Click to expand...
Click to collapse
Your welcome pal, I wish I can help you but modems are the last thing I will touch. Don't lose hope, try to flash modems, search for correct modem for your phone.
Good luck!
EDIT: I also recommend flashing more than 3 ROMS sometimes that helps. Try to flash XtreStoLite ROM and Terminator and any popular ROM you see. If it asks to flash modem in the Aroma installer do it, flash the latest one.
Sent from my Galaxy S6 running XtreStoLite 3.3.1 and Hacker Kernel.
So I tried to flash all modems via odin from here ( https://www.androidfilehost.com/?w=files&flid=50807 ) to stock ROM with space x kernel and nothing happened Does anybody know what to do now? I can't find other modems to download
EDIT: I tried to flash many ROMs but it didn't help.. I tried to flash so many modems and problem is still same. Maybe I can try to go back to 5.1? But how? Only install 5.1 firmware from sammmobile via odin and it's all?
Mlopik said:
So I tried to flash all modems via odin from here ( https://www.androidfilehost.com/?w=files&flid=50807 ) to stock ROM with space x kernel and nothing happened Does anybody know what to do now? I can't find other modems to download
EDIT: I tried to flash many ROMs but it didn't help.. I tried to flash so many modems and problem is still same. Maybe I can try to go back to 5.1? But how? Only install 5.1 firmware from sammmobile via odin and it's all?
Click to expand...
Click to collapse
Yes.
Grab it from SamMobile, choose the correct firmware for your region and flash it through Odin. Tell me what happens.
Sent from my Galaxy S6 running XtreStoLite 3.3.1 and Hacker Kernel.
TheLegend975 said:
Yes.
Grab it from SamMobile, choose the correct firmware for your region and flash it through Odin. Tell me what happens.
Sent from my Galaxy S6 running XtreStoLite 3.3.1 and Hacker Kernel.
Click to expand...
Click to collapse
ok so I did it and it stucked on boot logo.. I can only go to recovery or download mode.. So maybe flash some kernel?
Mlopik said:
ok so I did it and it stucked on boot logo.. I can only go to recovery or download mode.. So maybe flash some kernel?
Click to expand...
Click to collapse
No, don't flash anything.
Just go to your recovery and do a factory reset. Tell me what happens?
Sent from my Galaxy S6 running XtreStoLite 3.3.1 and Hacker Kernel.
TheLegend975 said:
No, don't flash anything.
Just go to your recovery and do a factory reset. Tell me what happens
Sent from my Galaxy S6 running XtreStoLite 3.3.1 and Hacker Kernel.
Click to expand...
Click to collapse
nothing.. still stucked on boot logo..

XT926 loses connection with simcard and restarts.

Hello,
Since half a year I have problem with my XT926.
It loses connection with simcard and restarts par time a day.
It has bootloader unlocked and Android version 4.4.2 (183.46.15.XT926)
I have replaced battery but it doesn't help.
What could be a problem?
Regards
Rafal
rafjak said:
Hello,
Since half a year I have problem with my XT926.
It loses connection with simcard and restarts par time a day.
It has bootloader unlocked and Android version 4.4.2 (183.46.15.XT926)
I have replaced battery but it doesn't help.
What could be a problem?
Regards
Rafal
Click to expand...
Click to collapse
Have you tried to re-flash your stock rom.
OGdroidster said:
Have you tried to re-flash your stock rom.
Click to expand...
Click to collapse
It was first what I have done.
Now I want to try cynaogenmod.
Regards
RJ
I had the issue too under cyanogen...
On mine i have disassambled the phone and maximized the gap between Mainboard and housing on the left... Then i fixed the screws again... Now the sim tray is sitting tighter! Only all two weeks i get this error again
Gesendet von meinem Moto Razr M mit Tapatalk
rafjak said:
It was first what I have done.
Now I want to try cynaogenmod.
Regards
RJ
Click to expand...
Click to collapse
cyanogenmod does it too just not as mutch it happens only like one or twice since I changed the file system. Sometimes not even once or twice. I Switch roms alot though. If you want to try this just hit me up and I will give you instructions on how to do it. You have to have a rom ready to flash and go when you do it.
OGdroidster said:
cyanogenmod does it too just not as mutch it happens only like one or twice since I changed the file system. Sometimes not even once or twice. I Switch roms alot though. If you want to try this just hit me up and I will give you instructions on how to do it. You have to have a rom ready to flash and go when you do it.
Click to expand...
Click to collapse
I want to download the latest NIGHTLY rom and flash it from Recovery.
Will it work?
Regards
RJ
rafjak said:
I want to download the latest NIGHTLY rom and flash it from Recovery.
Will it work?
Regards
RJ
Click to expand...
Click to collapse
Yes, Use TWRP 2.8.6.0 when you flash here is the link http://t.co/rIyzeQGzdo and are you rooted?
OGdroidster said:
Yes, Use TWRP 2.8.6.0 when you flash here is the link http://t.co/rIyzeQGzdo and are you rooted?
Click to expand...
Click to collapse
Yes, I am rooted.
I'd rather use this one
http://download.cyanogenmod.org/?device=xt926
RJ
rafjak said:
Yes, I am rooted.
I'd rather use this one
http://download.cyanogenmod.org/?device=xt926
RJ
Click to expand...
Click to collapse
use what ever recovery you want. If you run into problems you can use twrp to fix or repair certain things.
Why there is no INSTALL ZIP in CM Recovery only INSTALL UPDATE?
Is it the same?
Regards
RJ
PS.
I try both CM and TWRP Recovery, and phone stuck on CM logo.
Try re-downloading rom from cm site and put on sd card then go to recovery and do a full wipe by clicking advanced then check mark all boxes except the sd card box. Then flash rom. Your install scripts are in meta inf folder. dont tinker with it.
---------- Post added at 12:27 AM ---------- Previous post was at 12:26 AM ----------
rafjak said:
Why there is no INSTALL ZIP in CM Recovery only INSTALL UPDATE?
Is it the same?
Regards
RJ
PS.
I try both CM and TWRP Recovery, and phone stuck on CM logo.
Click to expand...
Click to collapse
Try re-downloading rom from cm site and put on sd card then go to recovery and do a full wipe by clicking advanced then check mark all boxes except the sd card box. Then flash rom. Your install scripts are in meta inf folder. dont tinker with it.
OGdroidster said:
Try re-downloading rom from cm site and put on sd card then go to recovery and do a full wipe by clicking advanced then check mark all boxes except the sd card box. Then flash rom. Your install scripts are in meta inf folder. dont tinker with it.
---------- Post added at 12:27 AM ---------- Previous post was at 12:26 AM ----------
Try re-downloading rom from cm site and put on sd card then go to recovery and do a full wipe by clicking advanced then check mark all boxes except the sd card box. Then flash rom. Your install scripts are in meta inf folder. dont tinker with it.
Click to expand...
Click to collapse
I have done all those instructions before, but it always stuck at the CM logo.
I have even tried format /data/ partition on f2fs (I have found such solution on this forum) but no results.
Maybe I should try older CM ROM?
RJ
rafjak said:
I have done all those instructions before, but it always stuck at the CM logo.
I have even tried format /data/ partition on f2fs (I have found such solution on this forum) but no results.
Maybe I should try older CM ROM?
RJ
Click to expand...
Click to collapse
What version of TWRP are you using? If you told me already sorry just don't remember.
OGdroidster said:
What version of TWRP are you using? If you told me already sorry just don't remember.
Click to expand...
Click to collapse
2.8.6.0
Is there some newer one for XT926?
RJ
rafjak said:
2.8.6.0
Is there some newer one for XT926?
RJ
Click to expand...
Click to collapse
That the newest version lollipop should work on it. Try changing system to ext4 but swipe factory reset first then click data then change to ext4 then swipe factory reset again then flash rom. Try a a different lollipop ROM. I'm currently using DU. But they all work if you can't flash anything I have been working on stock version of the last 4.4.2 and finally got it to flash via twrp 2.8.6.0. It has root and xposed and app ops adblocker and just got init.d to work just need to do a quick rebuild so init.d sticks via kernel auditor. You can flash it just to get your device going if all else fails.
OGdroidster said:
That the newest version lollipop should work on it. Try changing system to ext4 but swipe factory reset first then click data then change to ext4 then swipe factory reset again then flash rom. Try a a different lollipop ROM. I'm currently using DU. But they all work if you can't flash anything I have been working on stock version of the last 4.4.2 and finally got it to flash via twrp 2.8.6.0. It has root and xposed and app ops adblocker and just got init.d to work just need to do a quick rebuild so init.d sticks via kernel auditor. You can flash it just to get your device going if all else fails.
Click to expand...
Click to collapse
My stock 4.4.2 is now running well , but I have some restarts of device some times,
that why I would like to try CM 12.1. I flash it 3 or 4 times and always stuck on CM logo.
Regards
RJ
rafjak said:
My stock 4.4.2 is now running well , but I have some restarts of device some times,
that why I would like to try CM 12.1. I flash it 3 or 4 times and always stuck on CM logo.
Regards
RJ
Click to expand...
Click to collapse
Mine doesn't reboot and has been optimized. Also try a different ROM to flash but like DU or Mokee there's plenty of other ones. But try changing system to ext4 first. Then flash. I gave you directions on that in post few minutes ago. Try it and see if it works.
Returning to the main topic of this tread.
I have noticed that when I have MOBILE DATA turn off
the restarts do not occur.
Regards
RJ
Is it possible to flash CM 11 via twrp 2.8.6.0?
Regards
RJ
I have found the solution of this issue.
The problem is with the FAST DORMANCY service.
When it is active but provider does not support it
it causes problem.
It should be disabled in the file /system/build.prop
ro.mot.ds.fastdormancy.disable=true
Regards
RJ

My galaxy s6 is stuck on bootloop nothing works please help.

Hello I am so new to this things, my S6 got stuck on installing system update. I downloaded official firmware and tried installing it with odin, it passed but then again got stuck installing system update. Can someone please help me, I am from El Salvador and I saved so much to buy this phone. When I go into recovery mode I get TWRP but i dont know what to do.
try downloadmode and install rom again wirh odin??
lambik333 said:
try downloadmode and install rom again wirh odin??
Click to expand...
Click to collapse
I did, same thing it gets stuck on installing system update screen
dbuyck1 said:
I did, same thing it gets stuck on installing system update screen
Click to expand...
Click to collapse
sometimes you have to wait for 10 mins......same as custom rom..
lambik333 said:
sometimes you have to wait for 10 mins......same as custom rom..
Click to expand...
Click to collapse
I waited for almost 5 hours nothing happened
dbuyck1 said:
I waited for almost 5 hours nothing happened
Click to expand...
Click to collapse
If you flashed a stock firmware successfully it will not boot into twrp, flashing a stock firmware will install stock recovery, which means the stock firmware did not flash properly. Have you tried smart switch at all? Are you sure you have the correct firmware to flash through odin?
sofir786 said:
If you flashed a stock firmware successfully it will not boot into twrp, flashing a stock firmware will install stock recovery, which means the stock firmware did not flash properly. Have you tried smart switch at all? Are you sure you have the correct firmware to flash through odin?[/QUOTE
Yes I am sorry I didn't explained that. Atfer I tried to install stock ROM it got stuck, then smart switch didn't recognize the device but I manage to do the emergency recovery thing with model number and s/n but same thing it got stuck on the same installing system update screen. After that I installed TWRP via Odin to try to push a custom ROM zip, I did that but when I tried to install it failed.
Click to expand...
Click to collapse
Download Samsung SmartSwitch and from the upper menu select Emergency Recovery Mode, put your phone in Download Mode and connect it to your computer, enter your model number and S/N when asked, and it will download and install latest firmware for your model.
Sorry, i haven't seen that you already tried that.
dbuyck1 said:
sofir786 said:
If you flashed a stock firmware successfully it will not boot into twrp, flashing a stock firmware will install stock recovery, which means the stock firmware did not flash properly. Have you tried smart switch at all? Are you sure you have the correct firmware to flash through odin?[/QUOTE
Yes I am sorry I didn't explained that. Atfer I tried to install stock ROM it got stuck, then smart switch didn't recognize the device but I manage to do the emergency recovery thing with model number and s/n but same thing it got stuck on the same installing system update screen. After that I installed TWRP via Odin to try to push a custom ROM zip, I did that but when I tried to install it failed.
Click to expand...
Click to collapse
That means TWRP works and Fastboot/Download works. What is the actual Galaxy S6 model? Mine is G920F.
What custom ROM did you try?
What version of TWRP are you using? The wrong one can create issues.
Did you wipe the phone trough TWRP first? Twice? Including internal memory?
Sent from my SM-G920F using XDA Labs
Click to expand...
Click to collapse

Categories

Resources