Hello friends , I saw that forum several people are crying for MOTO G with hard brick , plus my MOTO G xt1033 different happened I was in 4.3 GPE and updated it to 4.4 and eventually bricked already tried every way to refresh it more up now nothing .
Sorry My English , im Brazillian
This is the error I get after trying flasher the bootloader already tried with 4.3 and 4.4 more is always the same mistake
OUTPUT: opening device: \\.\COM6
OUTPUT: OKAY [ 0.002s]
OUTPUT: greeting device for command mode
OUTPUT: opening device: \\.\COM6
OUTPUT: OKAY [ 0.002s]
OUTPUT: greeting device for command mode
OUTPUT: opening device: \\.\COM6
OUTPUT: OKAY [ 0.001s]
OUTPUT: greeting device for command mode
OUTPUT: opening device: \\.\COM6
OUTPUT: OKAY [ 0.001s]
OUTPUT: greeting device for command mode
OUTPUT: opening device: \\.\COM6
OUTPUT: OKAY [ 0.002s]
OUTPUT: greeting device for command mode
OUTPUT: opening device: \\.\COM6
OUTPUT: OKAY [ 0.002s]
OUTPUT: greeting device for command mode
OUTPUT: opening device: \\.\COM6
OUTPUT: OKAY [ 0.001s]
OUTPUT: greeting device for command mode
OUTPUT: opening device: \\.\COM6
OUTPUT: OKAY [ 0.001s]
OUTPUT: greeting device for command mode
OUTPUT: opening device: \\.\COM6
OUTPUT: OKAY [ 0.002s]
OUTPUT: greeting device for command mode
OUTPUT: opening device: \\.\COM6
OUTPUT: OKAY [ 0.001s]
OUTPUT: greeting device for command mode
OUTPUT: opening device: \\.\COM6
OUTPUT: OKAY [ 0.001s]
OUTPUT: greeting device for command mode
OUTPUT: FAILED (blank-flash:greet-device:error reading packet)
Related
I recently flashing AOSP kernel from Nexus 5 experience, and suddenly when i go to fastboot it hard bricked (does not boot anymore). But it detected at PC.
Unforunately, i cant get it work with unbrick tool,
it says :
i get this weird error and cant find it anywhere
Code:
D:\Desktop\MBM-CI_4.4.4>qboot.exe blank-flash
opening device: \\.\COM10
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM10
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM10
OKAY [ 0.003s]
greeting device for command mode
opening device: \\.\COM10
OKAY [ 0.004s]
greeting device for command mode
ReadFile() failed, error=31
opening device: \\.\COM10
opening device: \\.\COM10
opening device: \\.\COM10
OKAY [ 0.004s]
greeting device for command mode
OKAY [ 0.004s]
identifying device
Unexpected packet: 4. Was expecting: 14
FAILED (blank-flash:sahara-chip-stat:unexpected packet)
D:\Desktop\MBM-CI_4.4.4>
sometimes it show this
Code:
D:\Desktop\MBM-CI_4.4.4>qboot.exe blank-flash
opening device: \\.\COM10
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM10
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM10
OKAY [ 0.005s]
greeting device for command mode
opening device: \\.\COM10
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM10
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM10
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM10
OKAY [ 0.003s]
greeting device for command mode
opening device: \\.\COM10
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM10
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM10
OKAY [ 0.003s]
greeting device for command mode
opening device: \\.\COM10
OKAY [ 0.005s]
greeting device for command mode
FAILED (blank-flash:greet-device:error reading packet)
and i cant find that error message (sahara / greet-device) in this forum. anyone can help me?
anyone can help me? :crying:
same problem
i have the same problem but with moto g, did you found a solution?
do you solve it, i just met the same problem.
http://forum.xda-developers.com/moto-g/help/hard-bricked-trying-to-update-to-4-4-4-t2926071
My phone is xt1032 in us retail 4.4.3, rooted and installed cwm & xposed, then i try to update to 4.4.4 yesterday, after restart i remember it shows "invalid ..." and in the end it looks like finished and let me choose reinstall su yes or no, i clicked Yes, then it's totally broken.
I read http://forum.xda-developers.com/showthread.php?t=2623587, http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798, and tried all the methods mentioned in these posts, just can't get into fastboot, fail at blank-flash every time.
These are error logs:
Code:
C:\Users\Administrator\Desktop\a\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM4
OKAY [ -0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ -0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.016s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ -0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
FAILED (blank-flash:greet-device:error reading packet)
C:\Users\Administrator\Desktop\a\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM4
OKAY [ -0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ -0.000s]
greeting device for command mode
ReadFile() failed, error=31
opening device: \\.\COM4
OKAY [ 0.062s]
greeting device for command mode
ReadFile() failed, error=995
opening device: \\.\COM4
OKAY [ 0.016s]
greeting device for command mode
ReadFile() failed, error=995
opening device: \\.\COM4
OKAY [ -0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
OKAY [ 0.109s]
identifying device
Unexpected packet: 4. Was expecting: 14
FAILED (blank-flash:sahara-chip-stat:unexpected packet)
Help please & thanks in advance
megayu said:
My phone is xt1032 in us retail 4.4.3, rooted and installed cwm & xposed, then i try to update to 4.4.4 yesterday, after restart i remember it shows "invalid ..." and in the end it looks like finished and let me choose reinstall su yes or no, i clicked Yes, then it's totally broken.
I read http://forum.xda-developers.com/showthread.php?t=2623587, http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798, and tried all the methods mentioned in these posts, just can't get into fastboot, fail at blank-flash every time.
These are error logs:
Code:
C:\Users\Administrator\Desktop\a\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM4
OKAY [ -0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ -0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.016s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ -0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
FAILED (blank-flash:greet-device:error reading packet)
C:\Users\Administrator\Desktop\a\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM4
OKAY [ -0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ -0.000s]
greeting device for command mode
ReadFile() failed, error=31
opening device: \\.\COM4
OKAY [ 0.062s]
greeting device for command mode
ReadFile() failed, error=995
opening device: \\.\COM4
OKAY [ 0.016s]
greeting device for command mode
ReadFile() failed, error=995
opening device: \\.\COM4
OKAY [ -0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
OKAY [ 0.109s]
identifying device
Unexpected packet: 4. Was expecting: 14
FAILED (blank-flash:sahara-chip-stat:unexpected packet)
Help please & thanks in advance
Click to expand...
Click to collapse
A common problem by a lot of people here... You need to use 4.4.3 blankflash.. But Yeah that one isn't available. If 4.4.4 doens't work also I suggest you to wait for the Android 5.0 blankflash
megayu said:
My phone is xt1032 in us retail 4.4.3, rooted and installed cwm & xposed, then i try to update to 4.4.4 yesterday, after restart i remember it shows "invalid ..." and in the end it looks like finished and let me choose reinstall su yes or no, i clicked Yes, then it's totally broken.
I read http://forum.xda-developers.com/showthread.php?t=2623587, http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798, and tried all the methods mentioned in these posts, just can't get into fastboot, fail at blank-flash every time.
These are error logs:
Code:
C:\Users\Administrator\Desktop\a\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM4
OKAY [ -0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ -0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.016s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ -0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
FAILED (blank-flash:greet-device:error reading packet)
C:\Users\Administrator\Desktop\a\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM4
OKAY [ -0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ -0.000s]
greeting device for command mode
ReadFile() failed, error=31
opening device: \\.\COM4
OKAY [ 0.062s]
greeting device for command mode
ReadFile() failed, error=995
opening device: \\.\COM4
OKAY [ 0.016s]
greeting device for command mode
ReadFile() failed, error=995
opening device: \\.\COM4
OKAY [ -0.000s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.000s]
greeting device for command mode
OKAY [ 0.109s]
identifying device
Unexpected packet: 4. Was expecting: 14
FAILED (blank-flash:sahara-chip-stat:unexpected packet)
Help please & thanks in advance
Click to expand...
Click to collapse
I have identical problem and identical blank-flash errors
same problem here also
Some solution? Please
binom-music said:
I have identical problem and identical blank-flash errors
Click to expand...
Click to collapse
I have this problem pls help.
greeting device for command mode
ReadFile() failed, error=31
opening device: \\.\COM11
OKAY [ 0.001s]
greeting device for command mode
ReadFile() failed, error=31
opening device: \\.\COM11
OKAY [ 0.001s]
greeting device for command mode
ReadFile() failed, error=31
opening device: \\.\COM11
OKAY [ 0.001s]
greeting device for command mode
ReadFile() failed, error=31
FAILED (blank-flash:greet-device:error reading packet)
Hello, I have a Moto G first generation, and when I was upgrading to kitkat he hung up and did not call more when put to load it flashes the LED and not out place and not enter into fastboot can help me?
Result MotoFlasher Tool
SYSTEM: Device Selected: Moto G v1, Android 4.4.2
**** BOOTLOADER FLASHING STARTED: ****
OUTPUT: < waiting for device >
OUTPUT: opening device: \\.\COM14
OUTPUT: OKAY [ 0.020s]
OUTPUT: greeting device for command mode
OUTPUT: OKAY [ 0.001s]
OUTPUT: identifying device
OUTPUT: ...serial = 0x236D843
OUTPUT: ...chip-id = 0x800 (MSM8226)
OUTPUT: ...chip-rev = 0x0
OUTPUT: ...sv-sbl = 0x0
OUTPUT: OKAY [ 0.006s]
OUTPUT: finding files
OUTPUT: ...programmer = programmer.mbn
OUTPUT: ...singleimage = singleimage.bin
OUTPUT: OKAY [ 0.017s]
OUTPUT: validating files
OUTPUT: OKAY [ 0.026s]
OUTPUT: switching to download mode
OUTPUT: OKAY [ 0.002s]
OUTPUT: greeting device for image downloading
OUTPUT: OKAY [ 0.002s]
OUTPUT: sending programmer
OUTPUT: OKAY [ 0.042s]
OUTPUT: flashing singleimage
OUTPUT: FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)
OUTPUT:
OUTPUT:
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
Motorola Moto G
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
Moto G Q&A, Help & Troubleshooting
Good luck!
KaHJonas said:
Hello, I have a Moto G first generation, and when I was upgrading to kitkat he hung up and did not call more when put to load it flashes the LED and not out place and not enter into fastboot can help me?
Result MotoFlasher Tool
SYSTEM: Device Selected: Moto G v1, Android 4.4.2
**** BOOTLOADER FLASHING STARTED: ****
OUTPUT: < waiting for device >
OUTPUT: opening device: \\.\COM14
OUTPUT: OKAY [ 0.020s]
OUTPUT: greeting device for command mode
OUTPUT: OKAY [ 0.001s]
OUTPUT: identifying device
OUTPUT: ...serial = 0x236D843
OUTPUT: ...chip-id = 0x800 (MSM8226)
OUTPUT: ...chip-rev = 0x0
OUTPUT: ...sv-sbl = 0x0
OUTPUT: OKAY [ 0.006s]
OUTPUT: finding files
OUTPUT: ...programmer = programmer.mbn
OUTPUT: ...singleimage = singleimage.bin
OUTPUT: OKAY [ 0.017s]
OUTPUT: validating files
OUTPUT: OKAY [ 0.026s]
OUTPUT: switching to download mode
OUTPUT: OKAY [ 0.002s]
OUTPUT: greeting device for image downloading
OUTPUT: OKAY [ 0.002s]
OUTPUT: sending programmer
OUTPUT: OKAY [ 0.042s]
OUTPUT: flashing singleimage
OUTPUT: FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)
OUTPUT:
OUTPUT:
Click to expand...
Click to collapse
You can't enter fastboot? Can you enter bootloader mode?
...
itouchables said:
You can't enter fastboot? Can you enter bootloader mode?
Click to expand...
Click to collapse
No!:crying:
Hey,
I have a huge problem with my phone right now. When I made a software update from 4.4.2 to 4.4.4 my phone shutted down while being in recovery and installing the new software. It shutted down, because the battery was low.
So now if I connect my phone to my computer, my computer detects it as Qualcomm HS-USB QDLoader 9008 (COM6).
I already tried this: http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
But when I open the flash-blank.bat I get this message: FAILED (blank-flash:greet-device:error reading packet)
The whole log:
opening device: \\.\COM6
OKAY [ 0.001s]
greeting device for command mode
opening device: \\.\COM6
OKAY [ 0.001s]
greeting device for command mode
opening device: \\.\COM6
OKAY [ 0.002s]
greeting device for command mode
opening device: \\.\COM6
OKAY [ 0.001s]
greeting device for command mode
opening device: \\.\COM6
OKAY [ 0.002s]
greeting device for command mode
opening device: \\.\COM6
OKAY [ 0.001s]
greeting device for command mode
opening device: \\.\COM6
OKAY [ 0.001s]
greeting device for command mode
opening device: \\.\COM6
OKAY [ 0.001s]
greeting device for command mode
opening device: \\.\COM6
OKAY [ 0.001s]
greeting device for command mode
opening device: \\.\COM6
OKAY [ 0.001s]
greeting device for command mode
opening device: \\.\COM6
OKAY [ 0.001s]
greeting device for command mode
FAILED (blank-flash:greet-device:error reading packet)
Is there any hope to get it back to life?
Did you try This
Hit THANKS if I helped you!
@LasseWolpmann00 after you blank-flash you should be able to flash Stock ROM via fastboot
I'm having the same problems,. I think it has something to do with the MBM-CI of Lollipop.
I flash XT1032 Firmware on my XT1031 device,and It's on 9008 mode(QHSUSB_BULK),and i try this,It failed!
Code:
C:\Users\Andy\Desktop\blankflash\blankflash>qboot.exe blank-flash
opening device: \\.\COM10
OKAY [ 0.000s]
greeting device for command mode
OKAY [ 0.016s]
identifying device
...serial = 0x34F16F6
...chip-id = 0x801 (MSM8626)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.016s]
finding files
...programmer = programmer_8626.mbn
...singleimage = singleimage_8626.bin
OKAY [ -0.000s]
validating files
OKAY [ 0.016s]
switching to download mode
OKAY [ -0.000s]
greeting device for image downloading
OKAY [ -0.000s]
sending programmer
OKAY [ 0.016s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)
:crying::crying::crying:.Who can help me?
can somebody help me?
opening device: \\.\COM4
OKAY [ 0.007s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.008s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.009s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 1.435s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.009s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.009s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.009s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.009s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.008s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.009s]
greeting device for command mode
opening device: \\.\COM4
OKAY [ 0.009s]
greeting device for command mode
FAILED (blank-flash:greet-device:error reading packet)
Same here , it would be useful if someone could help us