Database Info

[NO LONGER MAINTAINED][RECOVERY][E8] TWRP touch recovery

UPDATE: I am no longer maintaining TWRP for devices that I do not possess. I am also no longer posting on XDA.​
Code:
*** Disclaimer ***
All flashing is done at your own risk!
While nothing from this thread should break your device,
don't come back here blaming anyone if it does!
Introduction
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Click to expand...
Click to collapse
Images
Installation instructions
TWRP Image Install method:
Most devices can be updated quickly and easily within TWRP if you already have version 2.8.4.0 or higher installed.
Download the latest version of TWRP appropriate for your device/firmware
Reboot to TWRP
Hit Install and tap the "Install Image" button in the lower right
Browse to the location of the TWRP image on your device and select it
Select recovery from the partition list and swipe to flash
Alternate Installation Method:
Fastboot Install Method:
You will need the platform-tools from the Android SDK on your computer. Find the Android command line tools section on the page linked and install the SDK tools package. From the SDK Manager, download only the platform-tools to get adb and fastboot binaries.
Windows users will need proper drivers installed on their computer. You can try the Naked ADB drivers or the Universal ADB drivers if you don't already have a working driver installed
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
Code:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
Code:
fastboot flash recovery twrp.img
Code:
fastboot reboot
Click to expand...
Click to collapse
Device Changelog
Current version: 3.2.1-0:
Code:
[LIST]Initial official release[/LIST]
Older Device-specific versions:
Code:
[LIST]N/A[/LIST]
Click to expand...
Click to collapse
TWRP Official Changelog
Current version: 3.2.1:
Code:
[LIST]minui fixes (cryptomilk)
[*]Better android-8.0 compatibility in ROM trees (Dees_Troy)
[*]Fix missing library in android-8.0 (nkk71)
[*]Fix inconsistent SDCard naming (DevUt)
[*]Default to TWRP restore instead of adb backup restore to fix restore on fresh TWRP boot (jlask)[/LIST]
Older versions:
Code:
[SIZE="4"][COLOR="Green"]3.2.0:[/COLOR][/SIZE]
[LIST]Allow restoring adb backups in the TWRP GUI (bigbiff)
[*]Fix gzip backup error in adb backups (bigbiff)
[*]Fix a bug in TWRP's backup routines that occasionally corrupted backup files (nkk71)
[*]Better support for installing Android 8.0 based zips due to legacy props (nkk71)
[*]Support vold decrypt with keymaster 3.0 in 8.0 firmwares (nkk71)
[*]Decrypt of synthetic passwords for Pixel 2 (Dees_Troy)
[*]Support newer ext4 FBE policies for backup and restore in libtar (Dees_Troy)
[*]v2 fstab support (Dees_Troy)
[*]Bring TWRP forward to android 8.0 AOSP base (Dees_Troy)
[*]Various other minor bugfixes and tweaks[/LIST]
[SIZE="4"][COLOR="Green"]3.1.1:[/COLOR][/SIZE]
[LIST]Backups will now include adopted storage keys (Dees_Troy)
[*]Fixed an adb restore issue (bigbiff)
[*]Fixed rebooting when no OS is present (Dees_Troy)
[*]Fixed line wrapping in the GUI terminal (_that)
[*]Updated TWRP source code to AOSP 7.1.2 (Dees_Troy)[/LIST]
[SIZE="4"][COLOR="Green"]3.1.0:[/COLOR][/SIZE]
[LIST]vold decrypt on a few select HTC devices, TWRP will now attempt to use the system partition's vold and vdc binaries and libraries to decrypt the data partition (nkk71 and CaptainThrowback)
[*]adb backup to stream a backup directly to or from your PC, see documentation [URL="https://github.com/omnirom/android_bootable_recovery/commit/ce8f83c48d200106ff61ad530c863b15c16949d9"]here[/URL] (bigbiff)
[*]tweak MTP startup routines (mdmower)
[*]support new Android 7.x xattrs for backup and restore to fix loss of data after a restore (Dees_Troy)
[*]support POSIX file capabilities backup and restore to fix VoLTE on HTC devices and possibly other issues (Dees_Troy)
[*]better indicate to users that internal storage is not backed up (Dees_Troy)
[*]improve automatic determination of TW_THEME (mdmower)
[*]minimal getcap and setcap support (_that)
[*]try mounting both ext4 and f2fs during decrypt (jcadduono and Dees_Troy)
[*]shut off backlight with power key (mdmower)
[*]timeout during FDE decrypt (Dees_Troy and nkk71)
[*]support for FBE decrypt and backing up and restoring FBE policies (Dees_Troy)
[*]boot slot support (Dees_Troy)
[*]TWRP app install prompt during reboot (Dees_Troy)
[*]support for AB OTA zips (Dees_Troy)
[*]support new Android 7.x log command (Dees_Troy)
[*]update recovery sources to AOSP 7.1 (Dees_Troy)
[*]numerous bugfixes and improvements by too many people to mention[/LIST]
[SIZE="4"][COLOR="Green"]3.0.3:[/COLOR][/SIZE]
[LIST]Partial release to help support the release of the [URL="https://www.xda-developers.com/team-win-releases-their-first-official-twrp-app-in-the-play-store/"]Official TWRP app[/URL][/LIST]
[SIZE="4"][COLOR="Green"]3.0.2:[/COLOR][/SIZE]
[LIST]Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
[*]Add Greek translation to some builds.[/LIST]
[SIZE="4"][COLOR="Green"]3.0.1:[/COLOR][/SIZE]
[LIST]support new CM 13.0 pattern encryption (sultanqasim)
[*]fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
[*]libtar updated to latest upstream and fixes (jcadduono)
[*]fixes for loading custom themes (_that)
[*]TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
[*]translation updates - added Italian, Czech and Polish and significant updates to Dutch
[*]progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
[*]fix input box text display (Dees_Troy)
[*]reboot option after zip install complete (bigbiff)
[*]other mostly invisible bug fixes and improvements[/LIST]
[SIZE="4"][COLOR="Green"]3.0.0:[/COLOR][/SIZE]
[LIST]Completely new theme - Much more modern and much nicer looking (by z31s1g)
[*]True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
[*]Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
[*]Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
[*]Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
[*]Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
[*]SuperSU prompt will no longer display if a Marshmallow ROM is installed
[*]Update exfat, exfat fuse, dosfstools (by mdmower)
[*]Update AOSP base to 6.0
[*]A huge laundry list of other minor fixes and tweaks[/LIST]
[U]Additional Notes[/U]
[LIST]WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.
[*]Notes for themers: In addition to the updated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.
[*]Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.
[*]We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance![/LIST]
[SIZE="4"][COLOR="Green"]2.8.7.0:[/COLOR][/SIZE]
[LIST]Initial ground work for software drawn keyboard (_that)
[*]Fix handling of wiping internal storage on datamedia devices (xuefer)
[*]Allow DataManager to set and read values from the system properties (xuefer)
[*]Fix crash when taking screenshots on arm64 devices (xuefer)
[*]Fix error message after an ORS script completes (Dees_Troy)
[*]Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
[*]Add system read only option – more details below (Dees_Troy)
[*]Add resize2fs and GUI option to run resize2fs (Dees_Troy)
[*]Fix crash loop caused by empty lines in AOSP recovery command file (_that)
[*]Prevent duplicate page overlays such as multiple lock screens (mdmower)[/LIST]
[U]Additional Notes[/U]
[LIST]Note: As always, be sure your custom theme is up to date (or remove your custom theme) before updating TWRP.
[*]System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won’t prompt to install SuperSU and TWRP won’t try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.
[*]resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don’t take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.
[*]This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at [url]https://jenkins.twrp.me[/url] and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at [url]https://gerrit.twrp.me[/url] to help us keep devices up to date and working.[/LIST]
Click to expand...
Click to collapse
Downloads
Download
Latest Official versions
Sources
Device tree
Kernel source
Click to expand...
Click to collapse
Known Issues
None
Click to expand...
Click to collapse
Bug Reporting
If you have an issue, the first step is to post a recovery log so we can determine the cause of the issue. This is done in recovery using Advanced -> Copy Log, or adb pull /tmp/recovery.log. Once a log is uploaded we can determine how best to proceed. NOTE: Posts that are reporting bugs or issues without an accompanying recovery log will be ignored! Additionally, providing details about your device setup, including variant, firmware version, and exact steps to reproduce your issue will also be helpful in diagnosing the problem.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If your issue is determined to be a bug, please consider posting it to our github issues log. It's pretty much impossible for us to keep up with the more than 40 threads that we have for the devices that we "directly" support. If you have a significant problem that cannot be answered in this thread, your best bet is to contact us via our website, or find us in our IRC channel below. If you see someone that's struggling, feel free to point it out to us. We need your help to help us keep track of all of our devices! Thanks!
Click to expand...
Click to collapse
Additional Help/Support:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
Click to expand...
Click to collapse
XDA:DevDB Information
TeamWin Recovery Project (TWRP), Tool/Utility for the HTC One E8
Contributors
Captain_Throwback, Dees_Troy, bigbiff, _that
Source Code: https://github.com/omnirom/android_bootable_recovery
Version Information
Status: Stable
Current Stable Version: 3.2.1-0
Stable Release Date: 2017-12-09
Created 2015-03-20
Last Updated 2018-08-14

Device-Specific Information
Reserved for FAQ (if needed)

Thumbs up, Cap!

Thanks for the official release.
If you have some spare time, could you consider material design ?
Sent from my HTC One_E8 dual sim using Tapatalk

DutchDanny said:
Thanks for the official release.
If you have some spare time, could you consider material design ?
Sent from my HTC One_E8 dual sim using Tapatalk
Click to expand...
Click to collapse
Use the Materialised theme.
When the stock theme is overhauled (expected with TWRP v3.0), I believe it will include some Material design elements.

@Captain_Throwback
I just flashed twrp 2.8.5.0 it's working great thanks.
I always had one problem which is when I press any button in the reboot menu there is a 5 second delay before it reboots.
All the previous versions had the same problem.
Is this permanent or can you fix it in future releases.
And the playstore twrp app doesn't have E8 on its menu, not even a single variant.
Can you please look into that too.
Thanks in advance.

iamsuperuser said:
@Captain_Throwback
I just flashed twrp 2.8.5.0 it's working great thanks.
I always had one problem which is when I press any button in the reboot menu there is a 5 second delay before it reboots.
All the previous versions had the same problem.
Is this permanent or can you fix it in future releases.
And the playstore twrp app doesn't have E8 on its menu, not even a single variant.
Can you please look into that too.
Thanks in advance.
Click to expand...
Click to collapse
The reboot "delay" is normal.
And there is no official TWRP app on the Play Store.

2.8.6.0 has been uploaded.

Captain_Throwback said:
2.8.6.0 has been uploaded.
Click to expand...
Click to collapse
after updating TWRP to 2.8.6.0, swipe to install function is not working.
anybody else experiencing the same?
EDIT: was using an old theme, after removing the theme, it's working fine now

ghost_razr said:
after updating TWRP to 2.8.6.0, swipe to install function is not working.
anybody else experiencing the same?
Click to expand...
Click to collapse
Update your theme, or remove it.

hi
any chance you can compile twrp for E9 plus?

-=knop=- said:
hi
any chance you can compile twrp for E9 plus?
Click to expand...
Click to collapse
I don't have it, so no.

does this work for m8sw variant? (dual sim - china unicom) ?
UPDATE: I tried it... works great! Thanks

2.8.7.0 is uploaded.
NOTE: If you have already updated to Lollipop, then it's possible the latest version will not work on your device. If you determine that this is the case, let me know - I can upload a beta M8 version that should work on the E8.

Captain_Throwback said:
2.8.7.0 is uploaded.
NOTE: If you have already updated to Lollipop, then it's possible the latest version will not work on your device. If you determine that this is the case, let me know - I can upload a beta M8 version that should work on the E8.
Click to expand...
Click to collapse
TWRP 2.8.7.0 has my sd write-protected
tried it with 2 SD cards is effective immediately back on ... and this write protection can be removed by anything neither format or the like can you please fix

snoopyhaeckers said:
TWRP 2.8.7.0 has my sd write-protected
tried it with 2 SD cards is effective immediately back on ... and this write protection can be removed by anything neither format or the like can you please fix
Click to expand...
Click to collapse
I think you may be confused by the system read-only prompt. Did you read the change log in the OP? Recovery can't write-protect your device. No kernel changes were made for this device, so it can't be anything the recovery did.

did it with two different SD cards once I tasted from the sd a zip as supersu 2:46 install this after read-only , 2.8.6.0 no problem working again wonderful, and the system is stock only Xposed framework and super su installed 'm back aud 2.8 . 6.0 thus, the problem for me is first solved .

snoopyhaeckers said:
did it with two different SD cards once I tasted from the sd a zip as supersu 2:46 install this after read-only , 2.8.6.0 no problem working again wonderful, and the system is stock only Xposed framework and super su installed 'm back aud 2.8 . 6.0 thus, the problem for me is first solved .
Click to expand...
Click to collapse
Just disable the read-only option. I don't really understand your issue (language barrier?). If the previous version works fine for you, feel free to continue using it.

Hi, could u make a recovery with f2fs supported for E8? Thank u very much....

schqiushui said:
Hi, could u make a recovery with f2fs supported for E8? Thank u very much....
Click to expand...
Click to collapse
Are there any ROMs that support it? Otherwise it serves no useful purpose.

[RECOVERY][totoro/CM11] TWRP 3.0.2-1 touch recovery [2016-10-16]

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Phone look:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CHANGELOG for 3.0.2-0:
-Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
-Add Greek translation to some builds.
CHANGELOG for 3.0.1-0:
-support new CM 13.0 pattern encryption (sultanqasim)
-fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
-libtar updated to latest upstream and fixes (jcadduono)
-fixes for loading custom themes (_that)
-TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
-translation updates - added Italian, Czech and Polish and significant updates to Dutch
-progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
-fix input box text display (Dees_Troy)
-reboot option after zip install complete (bigbiff)
-other mostly invisible bug fixes and improvements
CHANGELOG for 3.0.0-0:
-Completely new theme - Much more modern and much nicer looking (by z31s1g)
-True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
-Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
-Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
-Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
-Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
-SuperSU prompt will no longer display if a Marshmallow ROM is installed
-Update exfat, exfat fuse, dosfstools (by mdmower)
-Update AOSP base to 6.0
-A huge laundry list of other minor fixes and tweaks
WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.
Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.
Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.
We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
CHANGELOG for 2.8.7.0:
-Initial ground work for software drawn keyboard (_that)
-Fix handling of wiping internal storage on datamedia devices (xuefer)
-Allow DataManager to set and read values from the system properties (xuefer)
-Fix crash when taking screenshots on arm64 devices (xuefer)
-Fix error message after an ORS script completes (Dees_Troy)
-Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
-Add system read only option – more details below (Dees_Troy)
-Add resize2fs and GUI option to run resize2fs (Dees_Troy)
-Fix crash loop caused by empty lines in AOSP recovery command file (_that)
-Prevent duplicate page overlays such as multiple lock screens (mdmower)
Note: As always, be sure your custom theme is up to date (or remove your custom theme) before updating TWRP.
System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won’t prompt to install SuperSU and TWRP won’t try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.
resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don’t take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.
This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.
CHANGELOG for 2.8.6.0:
-Fix daylight savings time rules for USA and Europe (_that)
-Allow mulitple overlays for popup boxes (Dees_Troy)
-Add pattern style password entry for decrypt (Tassadar)
-Keyboard improvements (_that)
-Update AOSP base to 5.1 (Dees_Troy)
-Reduce theme count to 5 and rely on scaling (Dees_Troy)
-Various scaling improvements (Dees_Troy)
-Improved handling of resources in the GUI (_that)
-Make scroll bar size proportional to list size (_that)
-Allow scoll lists to render without a header (_that)
-Make console scroll per pixel with kinetic scrolling (_that)
-Support styles in XML to reduce XML size and improve consistentcy (Dees_Troy)
-Various other fixes and improvements (mdmower, bigbiff, codelover, etc)
Note: Starting with TWRP 2.8.2.0 and higher, adb sideload uses a new sideload method originally implemented in AOSP recovery. You will need the latest adb binaries to use sideload in these newer versions of TWRP. The version required is 1.0.32. You can find the version by running "adb version" on your computer. The new sideload feature no longer stores the zip on your device. Instead, a fuse file system is created in RAM and the zip is streamed from your computer. This puts less wear and tear on storage and ensures that large zips will not fill up all of your RAM. The sideload may spit an error on your PC side, but the zip should install just fine on your device.
DOWNLOAD:
1) Download TWRP from here
2) Flash via CWM or TWRP recovery
3) Enjoy
BUGS:
- You tell me
If you have found a bug, please consider posting it here. If you have a significant problem that cannot be answered in this thread, your best bet is to PM me directly, If you see someone that's struggling, feel free to point it out to me.Thanks!
SOURCES:
https://github.com/CyanogenMod-ARMv6/android_kernel_samsung_bcm21553-common
https://github.com/CyanogenMod-ARMv6/android_device_samsung_totoro
https://github.com/CyanogenMod-ARMv6/android_device_samsung_bcm21553-common
TWRP-240x320-ldpi-theme 2.8.7.0
TWRP-240x320-ldpi-theme 3.0.2-0
THANKS:
Dees_Troy.
TWRP team.
@psyke83 and BroadcomCM team for device tree and kernel source.

CHANGE LOG:
TWRP 3.0.2-1 [2016-10-16]
-TWRP now less than 5MB you can flash over stock PIT.
-Some UI improvement.
-Updated to latest changes.
TWRP 3.0.2-0 [2016-04-05] Removed
-Updated to latest changes.
TWRP 3.0.1-0 [2016-04-04] Removed
-Updated to latest changes.
TWRP 3.0.0-0 [2016-02-16] Removed
-Updated to latest changes.
-New theme reworked for ldpi (240×320).
TWRP 2.8.7.0 [2015-06-23]
-Fixed backup.
TWRP 2.8.6.0 BETA04[2015-04-10]
-Fixed all ui overlays.
-MTP enabled.
-Some changes I forgot.
TWRP 2.8.6.0 BETA03[2015-04-08]
-New UI hard coded from scratch.
TWRP 2.8.6.0 BETA02[2015-04-03]
-Fix inverted color
TWRP 2.8.6.0 BETA01[2015-04-01]
-Initial release
TWRP 3.0.2-1 now less than 5MB you can flash over stock PIT. If you want flash old TWRP3 look below
COLOR="Red"]For TWRP 3.0.0-0 to 3.0.2-0 we need boot partition size more than 5 MB[/COLOR]
Increase boot partition to 9 MB
1) Download totoro_moded.pit from here
2) Open odin and choose PIT then tick Re-Partition
3) Click on Start.
4) Reboot to recovery and flash TWRP 3.0.x-0
To restore stock PIT
1) Flash any kernel/recovery less than 5 MB, (eg twrp 3.0.2-1)
2) Download totoro_0623.pit from here
3) Open odin and choose PIT then tick Re-Partition
4) Click on Start.
Thank to Mohamed.Anwar for his work on modified PIT see thread

For me

Thanks
Sent from my C2305 using Tapatalk

BETA02 is up
-Fix inverted color

finnaly twrp for our device

I think this is the most advanced project for this device now, i liked it. Better than CWM [emoji57]

New portrait ui instead of watch ui takes some hours of work (porting and resize)
Realocate many buttons and lines to fix overlays.
guess new build soon Edit: BETA03 is up

Hello,
How can I flash it if I don't have CWM or TWRP installed? Thanks.

fdelente said:
Hello,
How can I flash it if I don't have CWM or TWRP installed? Thanks.
Click to expand...
Click to collapse
This is only to be used with cm11 as it's built into the cm11 kernel
come back here once you are using cm11 as then you will have CWM as it's built into the kernel

Is this not works with cm7? If yes please give me link to twrp which I need pls
Sent from my GT-S5360 using Tapatalk 2

doctor-who said:
Is this not works with cm7? If yes please give me link to twrp which I need pls
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
this is for cm11 only.
maybe in future will compile one for cm7

1% battery bug

Islam2001 said:
1% battery bug
Click to expand...
Click to collapse
Device tree uses fake bettery status (I dont know why)
BTW BETA04 is up and battery status is OK
-Fixed all ui overlays.
-MTP now enabled (not tested)
-Some changes I fogot

mohammad.afaneh said:
Device tree uses fake bettery status (I dont know why)
BTW BETA04 is up and battery status is OK
-Fixed all ui overlays.
-MTP now enabled (not tested)
-Some changes I fogot
Click to expand...
Click to collapse
Please , can you make it with OC?

Workaround method to get backup wroking
- Download and extract the attatchment file "twrps.zip" you will got ".twrps" without quotes.
- Copy .twrps to /TWRP folder on sdcard replace or remove the old one.
- Dont restore default in twrp settings menu (you will repeat steps again)

TWRP 2.8.7.0 touch recovery is up test and enjoy.

TWRP 3.0.0-0 coming soon
just some ldpi fixes to the UI and I will upload new build.
PS: screen shot say its 2.8.7.0 dont worry I tested the theme on the pre 3.0.0-0 version commit.

mohammad.afaneh said:
TWRP 3.0.0-0 coming soon
just some ldpi fixes to the UI and I will upload new build.
PS: screen shot say its 2.8.7.0 dont worry I tested the theme on the pre 3.0.0-0 version commit.
Click to expand...
Click to collapse
Wooohooooo greaat bro, go on, eagerly waiting btw , I just accessed a twrp recovery which is totally material themed , on cm12.1 , is it possible to port? (expecting too much xD )

raisul2010.5396 said:
Wooohooooo greaat bro, go on, eagerly waiting btw , I just accessed a twrp recovery which is totally material themed , on cm12.1 , is it possible to port? (expecting too much xD )
Click to expand...
Click to collapse
Why to port if we can compile it from source. And there is no ldpi theme at all, I redone every thing from zero.
And we dont have cm12.1!

[OFFICIAL][TWRP][sambar] TWRP for YU Yutopia

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CHANGELOG for 3.0.2-0:
-Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
-Add Greek translation to some builds.
CHANGELOG for 3.0.1-0:
-support new CM 13.0 pattern encryption (sultanqasim)
-fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
-libtar updated to latest upstream and fixes (jcadduono)
-fixes for loading custom themes (_that)
-TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
-translation updates - added Italian, Czech and Polish and significant updates to Dutch
-progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
-fix input box text display (Dees_Troy)
-reboot option after zip install complete (bigbiff)
-other mostly invisible bug fixes and improvements
CHANGELOG for 3.0.0-0:
-Completely new theme - Much more modern and much nicer looking (by z31s1g)
-True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
-Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
-Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
-Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
-Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
-SuperSU prompt will no longer display if a Marshmallow ROM is installed
-Update exfat, exfat fuse, dosfstools (by mdmower)
-Update AOSP base to 6.0
-A huge laundry list of other minor fixes and tweaks
WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.
Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.
Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.
We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
CHANGELOG for 2.8.7.0:
-Initial ground work for software drawn keyboard (_that)
-Fix handling of wiping internal storage on datamedia devices (xuefer)
-Allow DataManager to set and read values from the system properties (xuefer)
-Fix crash when taking screenshots on arm64 devices (xuefer)
-Fix error message after an ORS script completes (Dees_Troy)
-Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
-Add system read only option – more details below (Dees_Troy)
-Add resize2fs and GUI option to run resize2fs (Dees_Troy)
-Fix crash loop caused by empty lines in AOSP recovery command file (_that)
-Prevent duplicate page overlays such as multiple lock screens (mdmower)
Note: As always, be sure your custom theme is up to date (or remove your custom theme) before updating TWRP.
System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won’t prompt to install SuperSU and TWRP won’t try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.
resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don’t take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.
This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.
DOWNLOAD:
Most devices can be updated quickly and easily within TWRP if you already have version 2.8.4.0 or higher installed
1) Download the latest version from our website on your device
2) Reboot to TWRP
3) Hit Install and tap the "Images..." button in the lower right
4) Browse to the location of the TWRP image on your device and select it
5) Select recovery from the partition list and swipe to flash
OR:
You can find more information and download links on our website.
TWRP for Yu Yutopia
XDA:DevDB Information
[OFFICIAL][TWRP][sambar] TWRP for YU Yutopia, Tool/Utility for the Android General
Contributors
HostZero
Source Code: https://gihtub.com/TeamWin/android_device_yu_sambar/tree/cm-13.0
Version Information
Status: Testing
Created 2016-08-03
Last Updated 2016-08-04

Reserved
Flash Recovery Guide
Code:
[B]adb reboot bootloader
fastboot -i 0x2A96 oem unlock
fastboot -i 0x2A96 erase recovery
fastboot -i 0x2A96 flash recovery twrp-3.x-sambar.img
fastboot -i 0x2A96 reboot[/B]

Reserved

[RECOVERY][totoro/stock 2.3+] TWRP 3.0.3-0 touch recovery [2017-02-04]

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Phone look:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CHANGELOG for 3.0.2-0:
-Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
-Add Greek translation to some builds.
CHANGELOG for 3.0.1-0:
-support new CM 13.0 pattern encryption (sultanqasim)
-fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
-libtar updated to latest upstream and fixes (jcadduono)
-fixes for loading custom themes (_that)
-TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
-translation updates - added Italian, Czech and Polish and significant updates to Dutch
-progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
-fix input box text display (Dees_Troy)
-reboot option after zip install complete (bigbiff)
-other mostly invisible bug fixes and improvements
CHANGELOG for 3.0.0-0:
-Completely new theme - Much more modern and much nicer looking (by z31s1g)
-True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
-Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
-Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
-Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
-Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
-SuperSU prompt will no longer display if a Marshmallow ROM is installed
-Update exfat, exfat fuse, dosfstools (by mdmower)
-Update AOSP base to 6.0
-A huge laundry list of other minor fixes and tweaks
WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.
Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.
Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.
We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
CHANGELOG for 2.8.7.0:
-Initial ground work for software drawn keyboard (_that)
-Fix handling of wiping internal storage on datamedia devices (xuefer)
-Allow DataManager to set and read values from the system properties (xuefer)
-Fix crash when taking screenshots on arm64 devices (xuefer)
-Fix error message after an ORS script completes (Dees_Troy)
-Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
-Add system read only option – more details below (Dees_Troy)
-Add resize2fs and GUI option to run resize2fs (Dees_Troy)
-Fix crash loop caused by empty lines in AOSP recovery command file (_that)
-Prevent duplicate page overlays such as multiple lock screens (mdmower)
Note: As always, be sure your custom theme is up to date (or remove your custom theme) before updating TWRP.
System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won’t prompt to install SuperSU and TWRP won’t try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.
resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don’t take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.
This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.
CHANGELOG for 2.8.6.0:
-Fix daylight savings time rules for USA and Europe (_that)
-Allow mulitple overlays for popup boxes (Dees_Troy)
-Add pattern style password entry for decrypt (Tassadar)
-Keyboard improvements (_that)
-Update AOSP base to 5.1 (Dees_Troy)
-Reduce theme count to 5 and rely on scaling (Dees_Troy)
-Various scaling improvements (Dees_Troy)
-Improved handling of resources in the GUI (_that)
-Make scroll bar size proportional to list size (_that)
-Allow scoll lists to render without a header (_that)
-Make console scroll per pixel with kinetic scrolling (_that)
-Support styles in XML to reduce XML size and improve consistentcy (Dees_Troy)
-Various other fixes and improvements (mdmower, bigbiff, codelover, etc)
Note: Starting with TWRP 2.8.2.0 and higher, adb sideload uses a new sideload method originally implemented in AOSP recovery. You will need the latest adb binaries to use sideload in these newer versions of TWRP. The version required is 1.0.32. You can find the version by running "adb version" on your computer. The new sideload feature no longer stores the zip on your device. Instead, a fuse file system is created in RAM and the zip is streamed from your computer. This puts less wear and tear on storage and ensures that large zips will not fill up all of your RAM. The sideload may spit an error on your PC side, but the zip should install just fine on your device.
DOWNLOAD:
1) Download TWRP from here
2) Flash via CWM or TWRP recovery
3) Enjoy
BUGS:
- SELinux contexts not supported in kernel
- Reboot to Recovery/Bootloader and Power Off
If you have found a bug, please consider posting it here. If you have a significant problem that cannot be answered in this thread, your best bet is to PM me directly, If you see someone that's struggling, feel free to point it out to me.Thanks!
SOURCES:
Kernel based on GT-S5360-opensource-Update-4
TWRP-240x320-ldpi-theme 3.0.2-0
THANKS:
Dees_Troy.
TWRP team.

CHANGE LOG:
TWRP 3.0.3-0 [2017-02-04]
-Initial release

Works good
Found the bugs you listed
Rebooted to system but stucked on bootlogo
Yes it is bootloop
Can you bring me a stockrecovery.zip?
I am not so familiar with this device and i dont want to reflash and delete whole data
Thanks in advance

basem_ym said:
Works good
Found the bugs you listed
Rebooted to system but srucked on bootlogo
Yes it is bootloop
Can you bring me a stockrecovery.zip?
I am not so familiar with this device and i dont want to reflash and delete whole data
Thanks in advance
Click to expand...
Click to collapse
Flash any custom stock kernel, you can find them dev thread.

mohammad.afaneh said:
Flash any custom stock kernel, you can find them dev thread.
Click to expand...
Click to collapse
still working on cm9 project?

erriezzans said:
still working on cm9 project?
Click to expand...
Click to collapse
I think its a waste of time.
Maybe when I got a lot of free time.

I think I did something wrong
I installed your TWRP by stock recovery
I forgot about flashing temp cwm
I reflashed stock and reinstalled this recovery in the right way
Very good work thank you :good:
Just a small tip for who stucked in bootlogo:
Just grap a. Pit file and reflash stock firmware with [re-partition] checked in odin and then install this recovery by cwm
I found that installing this twrp by stock recovery will mess the data partition causing it to not mount in any way for some reason
Wish to see all the bugs fixed :victory:

twrp is nice
your twrp for the ldpi look nice, I love using twrp to install custom rom.

[OFFICIAL] [F2FS / EXT4] TWRP 3.1.1.0 for GM 5 Plus

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About F2FS Support:
What is the F2FS Support?
File system can connect faster performance. It's a compression system.
How do I migrate my device to the F2FS file system?
1- Partially pour in place.
2- Enter the Advanced Wipe section.
3. Mark the Data and Cache section.
4- Repair or Replace the File System. Marking F2FS
And shape it ..
İnstall İnstructions:
1- Enable allow oem unlock from developer options in settings.
2- Power off your phone.
3-*Press the power key while holding down the volume down key.
4- You should see a menu.
5- Connect your phone to PC , open cmd, and write*fastboot oem unlock-go .
6- Your phone will open.
7-*Power off your phone again and press the power key while holding down the volume down key.
8- You'll see a menu again.
9- Extract your downloaded archive.
10- You should see recovery.img.
11-*In the folder where recovery.img file is located, right-click while holding down the shift key.
12- Write*fastboot flash recovery recovery.img*to cmd screen.
13- Select recovery with volume keys and press power button.
14- Your flashed twrp will open.[/align]
My Changes
* Add EFS Support.
* Add OTG_usb support
* Update TWRP 3.1.0.1
TWRP Changes
CHANGELOG for 3.1.1.0:
Backups will now include adopted storage keys (Dees_Troy)
Fixed an adb restore issue (bigbiff)
Fixed rebooting when no OS is present (Dees_Troy)
Fixed line wrapping in the GUI terminal (_that)
Updated TWRP source code to AOSP 7.1.2 (Dees_Troy)Updated TWRP source code to AOSP 7.1.2
CHANGELOG for 3.1.0.0
vold decrypt on a few select HTC devices, TWRP will now attempt to use the system partition's vold and vdc binaries and libraries to decrypt the data partition (nkk71 and CaptainThrowback)
adb backup to stream a backup directly to or from your PC, see documentation here (bigbiff)
tweak MTP startup routines (mdmower)
support new Android 7.x xattrs for backup and restore to fix loss of data after a restore (Dees_Troy)
support POSIX file capabilities backup and restore to fix VoLTE on HTC devices and possibly other issues (Dees_Troy)
better indicate to users that internal storage is not backed up (Dees_Troy)
improve automatic determination of TW_THEME (mdmower)
minimal getcap and setcap support (_that)
try mounting both ext4 and f2fs during decrypt (jcadduono and Dees_Troy)
shut off backlight with power key (mdmower)
timeout during FDE decrypt (Dees_Troy and nkk71)
support for FBE decrypt and backing up and restoring FBE policies (Dees_Troy)
boot slot support (Dees_Troy)
TWRP app install prompt during reboot (Dees_Troy)
support for AB OTA zips (Dees_Troy)
support new Android 7.x log command (Dees_Troy)
update recovery sources to AOSP 7.1 (Dees_Troy)
numerous bugfixes and improvements by too many people to mention.
CHANGELOG for 3.0.2-0:
-Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
-Add Greek translation to some builds.
CHANGELOG for 3.0.1-0:
-support new CM 13.0 pattern encryption (sultanqasim)
-fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
-libtar updated to latest upstream and fixes (jcadduono)
-fixes for loading custom themes (_that)
-TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
-translation updates - added Italian, Czech and Polish and significant updates to Dutch
-progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
-fix input box text display (Dees_Troy)
-reboot option after zip install complete (bigbiff)
-other mostly invisible bug fixes and improvements
CHANGELOG for 3.0.0-0:
-Completely new theme - Much more modern and much nicer looking (by z31s1g)
-True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
-Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
-Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
-Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
-Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
-SuperSU prompt will no longer display if a Marshmallow ROM is installed
-Update exfat, exfat fuse, dosfstools (by mdmower)
-Update AOSP base to 6.0
-A huge laundry list of other minor fixes and tweaks
WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.
Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.
Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.
We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
CHANGELOG for 2.8.7.0:
-Initial ground work for software drawn keyboard (_that)
-Fix handling of wiping internal storage on datamedia devices (xuefer)
-Allow DataManager to set and read values from the system properties (xuefer)
-Fix crash when taking screenshots on arm64 devices (xuefer)
-Fix error message after an ORS script completes (Dees_Troy)
-Fix crashes / error when creating encrypted backups (_that, Dees_Troy)
-Add system read only option – more details below (Dees_Troy)
-Add resize2fs and GUI option to run resize2fs (Dees_Troy)
-Fix crash loop caused by empty lines in AOSP recovery command file (_that)
-Prevent duplicate page overlays such as multiple lock screens (mdmower)
Note: As always, be sure your custom theme is up to date (or remove your custom theme) before updating TWRP.
System read only option: Devices that ship with 5.0 and higher as their initial OS are using block level OTA updates. With this style of OTA update, the update script checks to see if the system partition has ever been mounted read/write. Further, the script also usually runs an SHA sum of the entire system partition to detect if any changes have been made. If any changes have been made, the OTA update will refuse to install. Since not all OEMs and devices have factory images available, we have created a new feature in TWRP that detects if the system partition has ever been mounted read/write. If not, you will be prompted asking if you want TWRP to mount system as read/write. If you choose not to allow TWRP to mount as read/write, TWRP won’t prompt to install SuperSU and TWRP won’t try to patch the stock ROM to prevent TWRP from being replaced by stock recovery. The goal of this option is to hopefully allow the user to make a raw system image backup that they can use to get back to a state where they can take OTA updates again.
resize2fs feature: On some devices like the Nexus 6, the factory images include a userdata image that is the proper size only for the 32GB units. If you flash the factory image to a 64GB Nexus 6, the data partition will appear as if it only has the free space of a 32GB device. Using the resize2fs option, TWRP can resize your data partition to take up the full space available. The resize2fs may also be useful to resize system partitions on devices where custom ROM system images don’t take up the full partition space. Lastly, resize2fs may be useful in some cases to reserve the proper space at the end of a data partition for a full disk encryption key, should your partition be formatted incorrectly for some reason.
This new version also marks our first set of full builds using our new jenkins build server. You can track the progress of builds at https://jenkins.twrp.me and we have taken additional steps to make it easier for device maintainers to step up and submit patches to our gerrit server at https://gerrit.twrp.me to help us keep devices up to date and working.
Bugs:
* Not that a bugs Really stable
Download's Lİnk
GM 5+ [OFFICIAL] TWRP 3.1.0.0.zip [15.6*MB]
Special Thanks:
@bigbiff for official bring up
@ataberkozen for tests
XDA:DevDB Information
[OFFICIAL] [F2FS / EXT4] TWRP 3.1.0.1 for GM 5 Plus, ROM for the General Mobile GM 5 Plus
Contributors
kaankulahli
Source Code: https://github.com/TeamWin/android_device_google_shamrock/tree/cm-14.1
ROM OS Version: 7.x Nougat
Version Information
Status: Stable
Created 2017-06-02
Last Updated 2017-06-02

I thought I need to format system in f2fs, but I see in first post that data need to format to f2fs.?

ludilo said:
I thought I need to format system in f2fs, but I see in first post that data need to format to f2fs.?
Click to expand...
Click to collapse
correct.

Gm8 de işe yararmı