i am using xolo a500. it ha fully bricked. only blank screen.
if i connect it to windows 7 system .. it is recognised as android bootloader interface with error code 10(device cannot start)
is there anyway to recover it?
pls pls help me
it is xolo a500.
it is bricked by installing swapper app.
after that it shown in windows 7 as qualcomm hs usb qload 9008
after downloading emmc now if i install any driver softer for this it shows with error code 10
i tried all driver software
emmc composite adb
xolo usb driver
qualcomm driver
adb bootloader interface
bt it just shows error code 10 this device cannot start
pls pls help me
or its only a brick cannot revive???
Hello, and welcome to XDA Assist! There is not much discussion on your device here on XDA, but I recommend you try and post your question here: Questions and Answers. Hopefully someone will be able to help! You will need to register to post.
Good luck!
Related
Can anyone help me on Getting My LG G PRO F240L back, it stucks and always restarting on CWM RECOVERY saying "Device Unlock! So Boot Success!"
I've tried to Flash KDZ LOLLIPOP using LG FLASHTOOL 2014 but stucks on processing . I Bet the problem is the "UNIDENTIFIED DEVICE -> NO DRIVER FOUND" When connecting it to Windows 7 Ultimate, I went to Device Manager and sees "UNKNOWN DEVICE" I Uninstalled it and Tries to Connect again to DOWNLOAD MODE but Unfortunately " NOT RECOGNIZED " the device I have changed different USB CABLES and restart the Laptop Several Times . I manage to UPDATE the DRIVERS but the Problem was I can't connect the Pocketwifi via Wireless Connectivity, I can Connect it with The Cable Inserted on the Laptop but Where the Phone should Get into Download Mode by the Laptop IF there's an inserted pocketwifi on it. Please Help who knows what to do with it... Or is there something that should Fix my LG G PRO that Stucks on CWM .
Sonjob said:
Can anyone help me on Getting My LG G PRO F240L back, it stucks and always restarting on CWM RECOVERY saying "Device Unlock! So Boot Success!"
I've tried to Flash KDZ LOLLIPOP using LG FLASHTOOL 2014 but stucks on processing . I Bet the problem is the "UNIDENTIFIED DEVICE -> NO DRIVER FOUND" When connecting it to Windows 7 Ultimate, I went to Device Manager and sees "UNKNOWN DEVICE" I Uninstalled it and Tries to Connect again to DOWNLOAD MODE but Unfortunately " NOT RECOGNIZED " the device I have changed different USB CABLES and restart the Laptop Several Times . I manage to UPDATE the DRIVERS but the Problem was I can't connect the Pocketwifi via Wireless Connectivity, I can Connect it with The Cable Inserted on the Laptop but Where the Phone should Get into Download Mode by the Laptop IF there's an inserted pocketwifi on it. Please Help who knows what to do with it... Or is there something that should Fix my LG G PRO that Stucks on CWM .
Click to expand...
Click to collapse
Hello,
You may try posting your query here Ask any Q noobfriendly with all relevant details, the experts there maybe able to assist you.
-Vatsal
Do you know who's expert on fixing LG PHONES ?
Sonjob said:
Do you know who's expert on fixing LG PHONES ?
Click to expand...
Click to collapse
Hello,
That thread is frequently visited by experts all over the forum willing to help newbies. Please post your query in the thread I linked above.
-Vatsal
I was trying to flash custom rom on my phone Micromax Canvas Knight A350 , but something went wrong and it got hard bricked . Its dead right now.
And now my pc is not recognizing usb driver . I have tried many solutions for
"Device not recognized : One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message." problem.
i have reinstalled the driver , turned of the power supply , updated all the drivers but error is still there.Please tell a good way to solve this issue so i can unbrick my phone. :crying:
Ashish1107 said:
I was trying to flash custom rom on my phone Micromax Canvas Knight A350 , but something went wrong and it got hard bricked . Its dead right now.
And now my pc is not recognizing usb driver . I have tried many solutions for
"Device not recognized : One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message." problem.
i have reinstalled the driver , turned of the power supply , updated all the drivers but error is still there.Please tell a good way to solve this issue so i can unbrick my phone. :crying:
Click to expand...
Click to collapse
Hi Ashish1107
Thank you for using XDA Assist
As we do not have an specific forum dedicated for your device yet, our experts at the below forum should be able to help you. Please be welcome to post over in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.
I was just trying to downgrade the phone through sp flash tools. But now nothing shows up. when i connect it to pc it shows unrecognised device. i also had installed the drivers .please help.
Hi,
Thanks for using XDA assist.
Please tell us what device you have so we can direct you to the appropriate place.
gsstudios
Hi i rooted acer s57 (mtk 6752 as it says) and after offical update it was soft bricked and then i downloaded spft and i flashed preloader and all other stuffs (Acer_AV0K0_S57_1.007.00_EMEA_GEN1) and i got hard bricked only blue light when i connect it via usb to pc or charger i tried to flash again (Acer_AV0K0_S57_1.003.00_EMEA_CUS1) got ERROR 4032 : Enable DRAM failed and i cant format it or even flash preloader or anything.. my pc doesnot even recgonize phone until i hold volume button down and connect it then i get unknown device and i dont know what to do...
maybe its something with drivers.. if anyone has solution...
thanks
bgveric1 said:
Hi i rooted acer s57 (mtk 6752 as it says) and after offical update it was soft bricked and then i downloaded spft and i flashed preloader and all other stuffs (Acer_AV0K0_S57_1.007.00_EMEA_GEN1) and i got hard bricked only blue light when i connect it via usb to pc or charger i tried to flash again (Acer_AV0K0_S57_1.003.00_EMEA_CUS1) got ERROR 4032 : Enable DRAM failed and i cant format it or even flash preloader or anything.. my pc doesnot even recgonize phone until i hold volume button down and connect it then i get unknown device and i dont know what to do...
maybe its something with drivers.. if anyone has solution...
thanks
Click to expand...
Click to collapse
Hello,
Please try posting your query here Ask any Query Newbie Friendly with all relevant details, the experts there maybe able to assist you.
-Vatsal
hi there
I got some problem in my Yu Yuphoria and i cant access my recovery, and my phone is also not booting. But when i connect my mobile to pc via fastboot it show proper drivers are installed( in device maneger) but when i give fast boot command it shows waiting for the device. please help
everybody will get a thanks
Duplicate.
https://forum.xda-developers.com/yu-yuphoria/help/help-unbricking-yu-yuphoria-t3549504