Related
- DISCLAIMER -
Code:
This Is For Educational Purposes Only
You Shall Not Use This On Other People Phones Without Permission Under Any Circumstances
I'm Not Responsible For Any Eventual Errors And Misbehaving Of Your Devices
Files And Tutorials Are Used And Partially Created According My Expirience And Also Collected From Internet & XDA Forums
All Regards Are Going To Their Authors
If Just Google Ask you For Password (Credentials) - You Can Turn On WIFI Via ADB In Order To Google Accept Your Device Via this Command:
Code:
adb shell svc wifi enable
Click to expand...
Click to collapse
Requirements:
The Device Needs To Have Usb Debugging Enabled
In Case Usb Debugging Isn't Enabled And You Have Recovery,you Can Run The Same Instructions From Recovery
For Some Methods Root Is Not Required (Though It Will Be Better If Device Is Rooted)
If None Of This Methods Works For You - Unfortunally You Probably Must Full Wipe Your Device
METHOD I
Solution For Everyone With Recovery (Cwm, Twrp, Xrec,Etc...) Installed:
INSTRUCTIONS:
1. Download this zip Pattern Password Disable (Download from attachments) on to your sdcard (using your PC, as you cant get into your phone, right )
2. Insert the sdcard into your phone
3. Reboot into recovery mode
4. Flash the zip
5. Reboot
6. Done!
Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
METHOD 2
Solution For Everyone Without Recovery Installed - ADB :
What You Need:
=>A computer running a Linux distro or Windows+Cygwin
=>USB cable to connect your phone to the PC
=>Adb installed
How to install adb:
1. Open Terminal
2. Type:
Code:
sudo apt-get install android-tools-adb
Hit [Enter]
3. Follow the instructions until everything is installed.
INSTRUCTIONS:
1. Connect you (turned on) Phone to the Computer via USB.
2. Open a terminal window.
3. Type:
Code:
adb devices
adb shell
cd data/system
su
rm *.key
4. Done...Now You Just Have To Reboot.
Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
METHOD 3
Solution For Everyone Before Lock Accident :
SMS Bypass - Download Link - Install It On Your Device (Download from attachments)
This App Allows You To Remotely Bypass Your Phone's Screen Lock By Sending A SMS.
It Removes Your Gesture Pattern Or Password After Receiving A Preset Keyword Along With A Secret Code Via SMS.
SMS Bypass App Requires Root.
INSTRUCTIONS:
1.First, make sure you give permanent root access to the app.
2.Change the secret code to your preferred choice. The default password is : 1234
3.To reset your screen lock, send the following message from another phone:
Code:
secret_code reset
Example:
Code:
1234 reset
Note 1 : There is a space between your secret code and reset. Also the secret code is case sensitive.
Note 2 : There is an option available to change the preset keyword. Default is : reset - Your phone will restart and your lock screen will be reset.
Note 3 : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
METHOD 4
Solution For Everyone Via Adb - SQL Command :
INSTRUCTIONS:
=>Type This Commands Separated In Your Terminal (CMD Prompt) :
Code:
adb shell
cd /data/data/com.android.providers.settings/databases
sqlite3 settings.db
update system set value=0 where name='lock_pattern_autolock';
update system set value=0 where name='lockscreen.lockedoutpermanently';
.quit
=>Now You Just Have To Reboot.
Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
METHOD 5
Solution For Everyone Via Adb - File Removal :
INSTRUCTIONS:
=>Type This Command In Your Terminal (CMD Prompt) :
Code:
adb shell rm /data/system/gesture.key
Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
METHOD 6
Solution For Everyone With USB Debugging Enabled :
INSTRUCTIONS:
Primary Step for all method:
Download & Extract to anywhere - Bypass Security Hack (Download from attachments)
Open SQLite Database Browser 2.0.exe in SQLite Database Browser.
Run pull settings.db.cmd inside By-pass security Hacks folder to pull out the setting file out of your phone.
Drag settings.db and drop to SQLite Database Browser 2.0.exe program.
Navigate to Browse data tab, At table there, click to list down the selection & selete secure
Instruction To Remove Pattern Lock:
Now, find lock_pattern_autolock, Delete Record
Close & save database
Run push settings.db.cmd and reboot your phone
Instruction To Remove PIN Lock:
Now, Find Or Create lockscreen.password_type, double-click & change it's value to 65536, Apply changes!
Now, find lock_pattern_autolock, Delete Record, If doesn't exist, Ignore
Close & save database
Run push settings.db.cmd and reboot your phone
Instruction To Remove Password Lock:
Now, find lockscreen.password_salt, Delete Record
Now, find lockscreen.password_type, Delete Record
Close & save database
Run push settings.db.cmd and reboot your phone
Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
METHOD 7
Solution For Everyone With Recovery Installed :
INSTRUCTIONS:
1.Download and Copy Aroma File manager.zip (Download from attachments or http://forum.xda-developers.com/showthread.php?t=1646108) to your memory card.
2. Open your recovery (press volume Down + Power button or it can be different according to the phones. Generally the phones who have press able button on the middle they have to press all three buttons. Google for you pattern there are lots)
3. There’ll b an option in recovery called “mount”. Go in that option and then mount all the cache and everything it is there.
4. Then select “update” and select “apply update from SD/external” and select aroma file manger.zip file that you downloaded using above QR code above.
5. After Flashing or updating, the aroma file manger will open. Use volume keys for up/down and power button 2 select like you use to get into recovery.
6. In aroma File manager , Go to menu , which is located in bottom strip and then select Settings.
7. Go to bottom n select “mount all partition in startup ” then exit from aroma file manger.
8. Now after exit , re-update that aroma file again and it will open again.
9. Go to data >> and then System.
Then find ‘gesture.key’ (for pattern lock) and ’password.key’ (for password lock) then long touch on gesture.key or password.key and sum option will be prompted , choose delete and delete that file and restart.
Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
Credits:
PHP:
iamareebjamal(http://forum.xda-developers.com/member.php?u=4782403)
amarullz(http://forum.xda-developers.com/member.php?u=402300)
me myself (@piraterex) :D (http://forum.xda-developers.com/member.php?u=5002224)
I don't know all Devs so pls PM me and ask for credits for their tools/app
I LOVE YOU sooooooooo much
Super sharing Dear Big Thanks.. :thumbup:
Sent from my GT-I9300 using Tapatalk 2
Nice. Method 2 worked on my S2 plus
a million thanks my FRIEND:victory::victory::victory::victory::victory::victory::victory::angel:
you saved my day :good::good:
I LOVE YOU :laugh::laugh::laugh:
I AM SO HAPPY
me1mon said:
I LOVE YOU sooooooooo much
Click to expand...
Click to collapse
cheetah81 said:
Super sharing Dear Big Thanks.. :thumbup:
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Gibz97 said:
Nice. Method 2 worked on my S2 plus
Click to expand...
Click to collapse
Mohdsultan said:
a million thanks my FRIEND:victory::victory::victory::victory::victory::victory::victory::angel:
you saved my day :good::good:
I LOVE YOU :laugh::laugh::laugh:
I AM SO HAPPY
Click to expand...
Click to collapse
thanx guyz..
Thank you very much, you saved me from factory resetting my device.
Sent from my Nexus 5 using Tapatalk
I believe this thread deserves more, it's help is so valuable.
Sent from my LG-P500 using XDA Free mobile app
Worked great.. did the Aroma method because I already had that installed... just a note. at&t Galaxy S4 4.4.2 mine was sparepassword.key and there was not password.key and I was using a password.
tnx dude
is there any way to bypass email verification???
if not...can you make it ...??
Note 3. 1,4,5 and 6 didnt work. Kept getting settings.db permission denied error.
Method 7 didnt work either. all I could see was gesture.key, deleted it but it ddint get rid of my pin lock.
piraterex said:
METHOD 7
Solution For Everyone With Recovery Installed :
INSTRUCTIONS:
1.Download and Copy Aroma File manager.zip (Download from attachments) to your memory card.
Click to expand...
Click to collapse
Thank you, thank you, thank you! You saved my day! :laugh::laugh:
This worked BUT: The aromafilemanager.zip didn't work, I had to download it from here: http://forum.xda-developers.com/showthread.php?t=1646108
So, please update the link, with the zip linked above it worked perfectly! :good:
//edit: And there is one more very simple way, if you have activated the device manager as device administrator (for some odd reason my phone deactivated all device admins, that's why I locked myself out in the first way, I use TimePIN and suddenly my code and the failsafe didn't work ) :
Go to https://www.google.com/android/devicemanager klick on "lock" and enter some pin like 1234, the current lockscreen will be overwritten by the 1234-lock.
Here's a simple windows app I made that will do all that with just one click over ADB http://youtu.be/NxzGxb73CQE
CM11 file to delete
this guide is cool
those who using CM11 the file to be deleted is cm.gesturekey
and the pattern is delted
i m using CM11
so just wanted to share
Thank you so much!
My Galaxy S2 slipped from my hand and battery popped out. After turning the device on, the phone would not accept my PIN! Strange as it seems.
Tried method 6 initially, but did not work. However went for Method 7 and profit!
I had TWRP recovery already in place, so didn't actually had to use the aroma file manager.
Thank you so much again. Weird days!
k.janku1 said:
Here's a simple windows app I made that will do all that with just one click over ADB http://youtu.be/NxzGxb73CQE
Click to expand...
Click to collapse
where is download link of tools?
i locked my phone with password lock..
I want to try option one
I have a ATT galaxy note 3 using Knoxraid v5.6 jb rom .. when i go into recovery it doesnt give me an option to select file from storage
only options to upgrade from ADB
upgrade from Storage
wipe cache
Any idea?
Ma$etas said:
i locked my phone with password lock..
I want to try option one
I have a ATT galaxy note 3 using Knoxraid v5.6 jb rom .. when i go into recovery it doesnt give me an option to select file from storage
only options to upgrade from ADB
upgrade from Storage
wipe cache
Any idea?
Click to expand...
Click to collapse
Try the option "upgrade from storage"
Normally it's called install zip from sd card. If it's not working, change the recovery.
simmac said:
Thank you, thank you, thank you! You saved my day! :laugh::laugh:
This worked BUT: The aromafilemanager.zip didn't work, I had to download it from here: http://forum.xda-developers.com/showthread.php?t=1646108
So, please update the link, with the zip linked above it worked perfectly! :good:
//edit: And there is one more very simple way, if you have activated the device manager as device administrator (for some odd reason my phone deactivated all device admins, that's why I locked myself out in the first way, I use TimePIN and suddenly my code and the failsafe didn't work ) :
Go to https://www.google.com/android/devicemanager klick on "lock" and enter some pin like 1234, the current lockscreen will be overwritten by the 1234-lock.
Click to expand...
Click to collapse
thanx buddy...I have added that link :good::angel:
what one will do if he has stock recovery with usb debugging disabled and has forgotten lock screen pattern or pin ? Is there anyway to enable usb debugging in fastboot or stock recovery or any other way?
!Disclaimer: You will void your warranty by proceeding with this process! Make sure to check every step and backup your own data. I am not responsible for you soft or hard-bricking your phone. This tutorial is for the Honor 9 STF-L09C432B36(0/2/3/4/5/6/7/8). Other versions may work or may not!
Pre requirements:
-A working pc with internet connection
-your phone
-pin set in android (lock screen)
-USB type c connector
-read everything carefully
-proceed with caution
-rather ask, than doing something you don't understand or you are unsure of
Credits go to:
-xzx0O0
-topjohnwu
-k1ks
1.UNLOCKING THE BOOTLOADER
!If the phone perfoms a bootloader unlock, a factory reset will be perfomed automatically. So you will have to backup your data to a sdcard or to the pc.!
Step 1.1 and 1.4 are hanging together. They can be skipped with no worries, but I would recommend to do it. !THIS IS NOT A FULL BACKUP!
1.1 [OPTIONAL]BACKING UP PHONE SETTINGS:
1.1.1 Download and install Hisuite on your pc: http://consumer.huawei.com/minisite/HiSuite_en/
1.1.2 Connect your pc with your phone
1.1.3a If you see a pop up like this,then choose transfer files and skip Step 1.1.3b
1.1.3b Go to your Notifications on your phone. There will be a settings notification. Press on it and select File transfer via USB.
1.1.4 On your phone go to Settings -> Security & privacy -> More -> and turn on allow Hisuite to use HDB (image)
1.1.5 The phone may ask you to trust the pc. Select always trust this pc (image)
1.1.6 Go to settings -> System -> About phone -> and press about 10 times on the build number.
1.1.7 Go to settings -> System -> Developer Options -> and turn on USB debugging (image)
1.1.8 Open Hisuite on pc
1.1.9 Choose Backup and select everything. Don't password protect it.
1.2 OBTAINING THE UNLOCK CODE
Everything you see below in pink does not work anymore since Huawei has officially stopped providing the bootloader unlock code on their website.
Instead please use this thread for obtaining your bootloader unlock code: https://forum.xda-developers.com/honor-7x/how-to/how-to-unlock-huawei-bootloader-removal-t3780903
1.2.1 Go to this website and press Unlock
1.2.2 Register a huawei id or login
1.2.3 Follow the steps until you see this page
1.2.4 Choose Since Emui 5.0
1.2.5 Fill out the rest of the information. (The IMEI can be found at settings -> System -> About Phone)
1.2.6 Press Commit. If every info was put in correct, A yellow message should appear saying: "Your unlocking password is: ..." Copy the code somewhere safe on your pc.
1.3 UNLOCKING THE BOOTLOADER
1.3.1 Download Minimal ADB and fastboot for your operating system. For windows 32 and 64bit: https://androidfilehost.com/?fid=746010030569952951
1.3.2 install and open the folder where you installed it to.
1.3.3 Run fastboot.exe and adb.exe once
1.3.4 Go to Settings -> System -> developer options turn on OEM unlocking. If you do not have developer options do step 1.1.6 and come back to 1.3.4.
1.3.5 Connect your phone with the pc and turn on USB Debbuging(Step 1.1.7) and file transfer via adb(Step 1.1.3b) on your phone
1.3.6 On your pc go to the folder where you have installed adb. Open a CMD Windows at this folder(For Windows hold leftshift and press right click. Then choose open cmd from this folder)
1.3.7 Make sure that usb debugging is still enabled. In CMD: type adb devices -> hit enter. It should say your serial number with the status "device" (image)
If that is not the case, check if 1.USB Debugging is enabled 2. Allow Transfer files in Notifications.
1.3.8 type in CMD adb reboot bootloader. Your device will reboot into the bootloader.
1.3.9 It should say FRP Unlock and PHONE locked.
If FRP is locked and green, you did not enable oem unlock. => Hold the power button to reboot and go back to step 1.3.4
1.3.10 type in CMD fastboot oem unlock code replace code with the number from Step 1.2.6. Hit enter.
1.3.11 A window will pop up asking you if you want to unlock the bootloader. !Pressing yes will void your warranty and perform a factory reset deleting all personal data on internal storage.! With your volume up and down keys navigate to yes and press the power button to proceed. Your device will automatically reboot and perform a factory reset and reboot again.
1.3.12 Put in all your information, so that the phone is fully usable again
[OPTIONAL]1.4 REAPLYING PHONE SETTINGS
1.4.1 Repeat Step 1.1.2, 1.1.3, 1.1.4, 1.1.5, 1.1.6, 1.1.7 and 1.1.8
1.4.2 In Hisuite press restore and choose the backup you have created in Step 1.1.9
2.FLASHING AND SETTING UP TWRP
2.1 FLASHING TWRP
2.1.1 Set a pin for your phone if you have not (lockscreen). Go to this thread and download stf-twrp-zxz-0.3.img and this kernel
2.1.2 Move both .img to your folder, where you have installed adb
2.1.3 Do Step 1.3.5, 1.3.6, 1.3.7 and 1.3.8
2.1.4 It should say FRP Unlock and PHONE Unlocked(image) => Step 2.1.5 . If Phone is locked and green, you did not unlock your bootloader => Step 1.3.
2.1.5 in CMD type fastboot flash recovery_ramdisk stf-twrp-zxz-0.3.img => hit enter.
2.1.6 type fastboot reboot in CMD to reboot. Do not close CMD window and do not unplug phone from pc if you continue with 2.2.
2.2 SETTING UP TWRP
2.2.1 Do Step 1.3.5, 1.3.6, 1.3.7
2.2.2 in CMD type adb reboot recovery_ramdisk => hit enter
2.2.3 wait for it to boot. It will ask you for a password. You can choose whatever you want. I would recommend you use your PIN to unlock your phone. REMEMEBER IT!
2.2.4 Then this screen will appear. Swipe to allow modifications.
2.2.5 Press Reboot -> System and do not install the twrp app.
2.2.6a If your on screen buttons and flash are working skip step 2.2.6b
2.2.6b If your on screen buttons are not working => connect phone to pc and connect with adb correctly. In CMD press adb reboot bootloader to reboot into the bootloader. Then flash the custom kernel in CMD , by pressing fastboot flash kernel KERNEL_B360a_TOUCH_FIX.img and hit enter to flash. Then reboot your phone with fastboot reboot
2.2.7 !Read through this whole thread to check which functions of TWRP are working and which not!
3. ROOTING WITH MAGISK
3.1.1 Download Magisk v-16.0 from here and the uninstaller from here.
3.1.2 Connect phone with PC. Activate file transfer via USB in Notifications. Move the Magisk-v16.0.zip and uninstaller.zip to the root of your internal storage or sdcard on your phone.
3.1.3 Do Step 1.3.5, 1.3.6 and 1.3.7 . Type in cmd adb reboot recovery_ramdisk => hit enter.
3.1.2 Type in your password from Step 2.2.3. Press on Install. Select the storage where you put both .zip from Step 3.1.2. Search and press on Magisk-v16.0.zip. Swipe to flash. Then press on reboot to System.
Nice thread. Good.
If the site is long or bug at wish , do not answer for ask code.
Use a VPn or Proxy.
Hi,
is this guide still valid? I will get my phone next weekend. I cannot find "Unlock" at https://emui.huawei.com/.
Saftpresse99 said:
Hi,
is this guide still valid? I will get my phone next weekend. I cannot find "Unlock" at emui huawei com/.
Click to expand...
Click to collapse
I've tried to get the unlock code from the site for three days to no avail. It always just redirects to front page as there doesn't seem to be any unlock page anymore. So if anyone has any better luck with this please share
Saftpresse99 said:
Hi,
is this guide still valid? I will get my phone next weekend. I cannot find "Unlock" at https://emui.huawei.com/.
Click to expand...
Click to collapse
anon9000 said:
I've tried to get the unlock code from the site for three days to no avail. It always just redirects to front page as there doesn't seem to be any unlock page anymore. So if anyone has any better luck with this please share
Click to expand...
Click to collapse
I wrote an email to my regional Huawei Support, and they replied that if i sent them my model, IMEI etc, they will resend unlock code. So try this guys
Saftpresse99 said:
Hi,
is this guide still valid? I will get my phone next weekend. I cannot find "Unlock" at https://emui.huawei.com/.
Click to expand...
Click to collapse
Yes I'm sorry that I am replying so late.
So noone really knows if it is going to come back, but here's what you can do:
1: Go to this site. Scroll down. Choose your country. Call the hotline. Give them the required info. They will send you the unlock-code via Email. I tried it with the German Number and they send it to me without a problem.
2: Try emailing the support from Honor or Huawei.
3: Try out this Thread. You will have to pay about 4 EUR ($5).
Lukalion said:
Yes I'm sorry that I am replying so late.
So noone really knows if it is going to come back, but here's what you can do:
1: Go to this site. Scroll down. Choose your country. Call the hotline. Give them the required info. They will send you the unlock-code via Email. I tried it with the German Number and they send it to me without a problem.
2: Try emailing the support from Honor or Huawei.
3: Try out this Thread. You will have to pay about 4 EUR ($5).
Click to expand...
Click to collapse
How long did it take for you to get the unlock? I just called and they told me it should take about two weeks
shiboby said:
How long did it take for you to get the unlock? I just called and they told me it should take about two weeks
Click to expand...
Click to collapse
Try calling different phone numbers. Some are willing to give you the unlock and some not. I think they also don't know whats really going on with the site etc. But as of right now the 3 ways mentioned above, are the only ways to get the unlock code. Maybe the Unlock site at https://emui.huawei.com/ will come back some time.
Thank you for writing this tutorial, it's really helpful to have all steps in one place to know what to do.
If you could include how to revert back to the locked bootloader with stock firmware, that can be sent back to Huawei for warranty repairs, that would be great!
Best,
Chris
Hi
I did everything like in instructions and its gone well.
then i decided to install module in magisk to hide navigation bar and now my phone has a black screen and i can only turn it off... anyone knows how to fix it?
KubaEM said:
Hi
I did everything like in instructions and its gone well.
then i decided to install module in magisk to hide navigation bar and now my phone has a black screen and i can only turn it off... anyone knows how to fix it?
Click to expand...
Click to collapse
1. Go this thread and download the Mount-Magisk.zip
2. Move it somewhere to your phone. (If you are unable to boot to system connect phone to PC. Reboot phone to twrp. Open a adb window on the PC. In twrp go to advanced. Start the adb sideload. Press on cancel and then on back. Move the Mount-Magisk.zip into your adb folder on the pc. In the cmd type adb push Mount-Magisk.zip /external_sd or which ever path you like. )
3. Boot to twrp.
4. Go to Install and choose the Mount-Magisk.zip . Flash it. After flash press on back.
5. Go to Advanced -> File Manager. At the very top/root of your system should now be a folder called Magisk. Open the folder. The next folders also should include your Modules. Hold the folder of the module and delete it.
6. Reboot and everything should be fixed.
Let me know if it worked! :good:
Just to let everyone know. The unlock page is back. :highfive::laugh::laugh::laugh: Happy Unlocking :good::victory::victory::victory:
Lukalion said:
Just to let everyone know. The unlock page is back. :highfive::laugh::laugh::laugh: Happy Unlocking :good::victory::victory::victory:
Click to expand...
Click to collapse
Yeah... Its back for about 2 months, and then it will be closed pernamently
click
So if I unlock bootloader, and then root my device then i won't receive any OTA update anymore... but how can I deal with this situation in order to re-lock when it's OTA time and unlock again when I got it?
ps. No OTA means only no firmware or it means also no security patches ??
ov3rlordRAGE said:
So if I unlock bootloader, and then root my device then i won't receive any OTA update anymore... but how can I deal with this situation in order to re-lock when it's OTA time and unlock again when I got it?
ps. No OTA means only no firmware or it means also no security patches ??
Click to expand...
Click to collapse
In case of Honor devices, to a certain point you are still getting ota updates. To check on the newest updates download the app Huawei Firmware Finder. Then follow the HuRUpdate Thread to update to the newest firmware without unrooting.
hi, magisk automatically closes after about 3 seconds, how can I solve this problem?
listo09 said:
hi, magisk automatically closes after about 3 seconds, how can I solve this problem?
Click to expand...
Click to collapse
Try reflashing Magisk in TWRP.
listo09 said:
hi, magisk automatically closes after about 3 seconds, how can I solve this problem?
Click to expand...
Click to collapse
Issue Magisk FC , when you open Magisk , go direct on 'About' .
This will keep it open.
Some solutions should be on official section for Magisk
Lukalion said:
Try reflashing Magisk in TWRP.
Click to expand...
Click to collapse
Funziona, grazie
Hi! I'm currently attempting to complete step 2.1, but I've run into a problem.. I've completed all the 1.-steps and added the twrp & kernel img-files to the adb folder, but when I attempt to use cmd fastboot flash recovery_ramdisk stf-twrp-zxz-0.3.img, I just get the response waiting for any device, and then nothing else happens. Any suggestions?
Hello
Here im explaining detail method of rooting Coolpad Note 5 Nougat/Marshmallow.
YOUR WARRANTY IS NOW VOID
IM NOT RESPONSIBLE IF YOU HARD/SOFT BRICK YOUR MOBILE.
Step:1 Enable USB Debugging
*If you have already enabled, then skip this step. Otherwise follow this,,,
- First of all Go to Settings>About Phone
- Then you see "Build Number"
- Click on Build number 7 times (screenshot)
- Now developer options is enable
- Open Settings>Developer option
- Then find USB Debugging, and Enable it
- Done
Step:2 Root and Install Magisk Manager
- Connect Your mobile to PC, and Select "Transfer files" mode
- Now download this Package and Extract on Desktop >>
*transfer recovery folder from zip to your mobile internal storage
- Install Magisk Manager, and openrp.apk from apk folder
- After both installed, open "openrp app". Then restart your phone.
- After restart, disconnect and reconnect usb cable, and choose "Transfer Files" mode
- Now open cmd.bat file from adb folder inside extracted zip.
- Now black window will appear.
- First type "adb shell" and hit enter
- It will show dialogue box on mobile about ADB USB Debugging, click on allow this computer and ok. (screenshot)
- Now you see on computer that "CP3600I:$" printed on that black cmd screen.
- Ok. Close that cmd.bat screen and re open it.
- Type "adb remount" and hit enter
- Type "adb push magisk /system/bin" and hit enter
- You see that some KB/s was transferred.
- Now Type "adb shell" and hit enter
- You see "CP3600I: #" so If you see "#" character then it means you are root.
- Now type "magisk su" and hit enter
- Then you can press "CTRL+C"
- Then type "audioelectric start" and hit enter
- Then type "audioelectric setDM" and hit enter
- Open Magisk Manager app. Since that apk is old version you will see UPDATE on magisk app screen
- Update magisk and reopen it, You see "INSTALL" button, click on it
- You see magisk***.zip to Install, so Click on "Direct Install (recommend)" option.
- After it will download zip, and took 3 minute to make root permanent. (screenshot)
- After reboot, Open Magisk manager app and you see its completely rooted your mobile
Step:3 Install Recovery
- Install "Flashify" app from Playstore
- Open it and Backup your current Kernel and Stock recovery
- Now go to Flash tab and choose "Recovery Image" (screenshot)
- Select "Choose files", and navigate recovery.img file from that recovery folder from zip file (previously extracted in step-2)
*if you are marshmellow user then select--twrp-marshmellow.img
*if you are nougat user then select--twrp-nougat.img
- Flash and reboot
- After reboot it will open twrp.
- Again reboot your phone so you see home screen.
*However this tutorial is simple, many new people dont know or understand how to root. so i wrote step by step.
*If you cant able to root, then you did not follow those steps correctly. So read/follow it carefully.
*Coolpad Note 5 Users/Dev group on Telegram >> https://t.me/joinchat/JBAXXBGIoLRlSoD3Zrscyw (pls Join this)
**Credit:
TonyStark (for root method)
Kuber (for recovery)
Amit
I bricked my phone when I updated the magisk app and install the updated zip . My device was stuck on bootloader. I had to flash stock .
Please tell how to unroot
No VoLTE option
Hello everyone,
I flashed my phone using YGDP with custom ROM 7.0.210.p0.161109.cp 3600i, ota v210, about 3 months back.
Recently, I observed that the VoLTE option is not appearing the Network setting of JIO. Also, I am not able to make or receive calls.
Tried almost everything, checked *#*#4636#*#* for Phone Information and setting the LTE network but that doesn't work.
Can anyone help me out?
THIS WILL VOID YOUR WARRANTY OR MAY BRICK YOUR PHONE IF NOT DONE CORRECTLY.
I made this because i wanted to play AR games on an unsupported phone, so i want to help other people.
Follow this tutorial CLOSELY, or you'll mess up your phone
WARNING: THIS POST IS DIVIDED IN TO PARTS, IF YOU'RE HERE FOR THE A20e ROOT GUIDE, PLEASE CLICK (Coming soon)
1.0: Preparing.
1. Get your firmware from Sammobile or other sites
Get the NEWEST firmware that is from YOUR COUNTRY.
2. Download and install samsung mobile drivers.
3. Download ODIN Flash tool.
1.1: Unlocking your bootloader.
From this point on, you are taking a risk. You will void your warranty if you continue, i cant stress this enough.
1. Open the settings app, and navigate to: Device Info>Software Information and press Build number 7 times in a row. You will now have access to the developer settings.
2. Navigate back to settings, scroll down and press on "Developer settings"
3. Now, you should see a button called "OEM Unlock". PRESSING THIS WILL WIPE ALL OF YOUR DATA. (Which is normal.)
4. Go through the inital setup, and dont enter your data YET. Dont turn on wifi aswell, since youre going to wipe your data again later.
5. Now, turn off your phone.
6. When your phone is turned off, hold the Volume UP and DOWN button, and plug in your USB-Type C cable.
7. Now, hold the volume UP button for 8 seconds, until the screen changes. Press the volume UP button afterwards. Your data will get wiped again.
8. Go through the initial setup AGAIN, connect to wifi, but DONT enter your google/samsung account data just yet.
You have now unlocked your bootloader.
1.2: Unpacking your boot image.
1. Once you have the firmware, extract it using 7-Zip (Or any other extraction program).
2. You should now have a file called "boot.img.lz4"
3. Download the LZ4 Program on Github.
4. -Extract the zip in any EMPTY folder.
-Put the "boot.img.lz4" into the folder.
-Open CMD. Navigate to the folder you extracted LZ4 into.
- use this command to extract it: "lz4.exe -d boot.img.lz4 boot.img
- Done, now put the "boot.img" to your phone storage.
1.3: Patching the boot image.
1. After you copied the "boot.img" to your phone storage, open magisk manager.
2. Now, select the Install button on the TOP. Press "Patch an image"
3. Select the "boot.img" file you copied from your PC.
4. Wait.
5. Done. Copy the "magisk_patched.img" file to your computer.
6. Convert the ".img" file into a ".tar" file.
2.0: Rooting: Flashing the .tar to your phone.
Follow closely.
1. Turn off your phone, and hold the volume UP and Power button at the same time. After you booted into the recovery, select "reboot into bootloader".
2. Open odin, and firstly go to "options" and untick "Auto reboot". Then, press the "AP" Slot, and select the "magisk_patched.tar" file.
3. Connect your USB Cable, and press "start".
4. it should now say "PASS"
2.1: Rooting
1. hold the volume DOWN and Power button for 7 seconds.
2. QUICKLY hold the volume UP and Power button
3. Select "Wipe data". Press yes.
3. Now, go through the initial setup. You can now enter your data, since we arent wiping our phone anymore.
3. Final Touches
1. Download Magisk Manager again. Open it, and it will install a zip. It will automatically restart.
2. Open magisk manager. If there is a GREEN tick on the top, Well done! You've made it!
You are done with rooting your phone! you can now leave, or continue if you want to play AR games.
Other: AR Compatibility
1. Open magisk manager, press the 3 lines on the top left, and select "downloads"
2. Search "ARCore"
3. Install it, and reset your phone.
4. Now, go to the play store and install "ARCore"
5. You have AR access! Download games like "FNaF AR" or anything else.
This guide will get updated every week.
anyone can confirm this'll work?
Chiryn said:
anyone can confirm this'll work?
Click to expand...
Click to collapse
I tried it, but it didn't work. I think I downloaded a bad firmware tho. I am going to try it now. Btw. if you want an easy firm download I highly recomend Frija v.1.3.0. - only easy, fast and WORKING (at least for me) firmware downloader.
I am stuck at odin saying NAND Write Start!!.
Could anyone help me?
How to Root Samsung Galaxy A7 2018 (a750fn) + Working Secure Folder & Samsung Health
Hello, this is a guide on how to root Samsung galaxy A7 2018 (a750fn). I've tried to simplify the guide as much as I can but I still suggest to root your phone only if you know what you are doing! Also if you have any questions or problems, just ask.
Note: Sorry for any grammatical or spelling mistakes. English is not my native language.
!Disclaimer!
- You do this at your own risk! I am NOT responsible for bricked devices, stuck on bootloop etc.!
- Backup your device before proceeding forward!
- This guide WILL trip Knox so your warranty will be void!
- The Knox-dependent applications like Secret Folder and Samsung Health will stop working but in this guide, there are two other miniguides that will explain how to enable them even after tripped Knox. - All of these steps have been tested on my phone - Samsung Galaxy A7 (2018) (a750fn) where they worked without problems.
Required Software/Resources:
- Odin (for flashing) - Download
- Samsung USB Drivers - Download
- 7zip (for archives) - Download
- Firmware with the last security patch from 2020 (for me, the patch was from November 2020) - Download
- TWRP Recovery - Download
- Magisk (for root) - Download
- DM-VERITY, FORCED ENCRYPTION, AND DISC QUOTA DISABLER (Disable_Dm-Verity_ForceEncrypt.zip) - Download
- A MicroSD card
Setup the Software/Resources:
1. Install 7zip
2. Install the Samsung USB Drivers
3. Extract Odin to a folder and put it on the Desktop
4. Extract the firmware to a folder and put it on the Desktop
In the firmware there'll be 5 files:
- BL_FIRMWAREVERSION
- AP_FIRMWAREVERSION
- CP_FIRMWAREVERSION
- CSC_OMC_OXM_FIRMWAREVERSION
- HOME_CSC_OMC_OXM_FIRMWAREVERSION (delete this one)
Delete the files starting with HOME_CSC.
5. Change the Magisk extension from .apk to .zip (Ex. Magisk_ver.apk --> Magisk_ver.zip)
6. Put the Magisk_ver.zip in the MicroSD card
7. Put the Disable_Dm-Verity_ForceEncrypt.zip in the MicroSD card as well
8. Insert the MicroSD card in the phone
Steps to Root:
NOTE: BEFORE PROCEEDING FORWARD, BACKUP YOUR DEVICE!
1. Enable Developer Options (by clicking 7 times the build number of your phone)
2. Open Developer Options and find the option OEM Unlock
3. Enable OEM Unlock (this will factory reset the phone)
- After the factory reset the OEM Unlock option will be enabled and this will allow
flashing custom recoveries and etc. to the phone.
4. After the factory reset, when the phone boots up, turn it off
5. Connect the phone to you PC/Laptop via USB cable
6. While the phone is completely turned off, hold the buttons Volume UP + Volume DOWN until Download mode shows up
7. Press Volume UP again to confirm that you'll be modifying your device
8. On your PC/Laptop open Odin
9. On the left side in Odin there are 3 tabs: Log, Options and Pit
10. Open Options and remove the checkmark on the Auto Reboot option, then go back to Log
11. In the middle of the program there are 5 slots:
- BL (Bootloader)
- AP (Application Processor)
- CP (Modem)
- CSC (Consumer Software Customization)
- USERDATA
12. Click the first slot and navigate to the location where you extracted the firmware
- The start of the names of each firmware file corresponds to the names of the slots in Odin
13. Place each firmware file in the correct Odin slot that corresponds to their names
(Ex. BL_FIRMWAREVERSION is inside the BL slot)
14. With your phone connected, press the Start button to flash the firmware
- After the firmware has been flashed successfully, your phone will be downgraded to the last security patch from 2020 which fixes possible bootloops or other issues when rooting/disabling forced encryption.
- The firmware is successfully flashed when the top left bar is green and above says PASS!
After flashing the firmware DON'T boot in Android yet!
15. After flashing, hold the Volume DOWN + Power button for around 7 seconds, immediately when the screen goes black switch to holding Volume UP + Volume DOWN
- You will enter back in Download mode
16. In Odin, press the Reset button and again uncheck Auto Restart in Options
17. In the AP slot, select the TWRP Recovery (which is in .tar archive)
18. With your phone connected to your PC/Laptop in Download mode, press Start on Odin
- This will flash the custom recovery to the phone
19. You can now disconnect the phone from your PC/Laptop
Again, after flashing the recovery, do NOT boot into Android yet!
20. After flashing the custom recovery, hold the Volume DOWN + Power button for around 7 seconds, immediately when the screen goes black switch to holding Volume UP + Power button
- This will boot the phone into the custom recovery (TWRP in this case)
22. Inside TWRP Recovery, go to Wipe, select Format Data and type 'yes' to confirm
23. After the format, go to Install, select the MicroSD card and find where you've put the Magisk_ver.zip file, select it and install it
- This will root to the device!
24. After you have installed Magisk, go back to Install, select the MicroSD card and find where you've put Disable_Dm-Verity_ForceEncrypt.zip and install it
- This will disable the forced encryption!
- If there's an error when installing the zip that says 'Failed to mount '/odm' (no such file or directory)", simply ignore it and proceed forward.
25. Go to Reboot, select System and wait around 5-10 minutes till Android fully loads
- After Android has loaded, proceed through the setup process.
26. Go to all apps and find the application called Magisk
- When you open it, it'll ask you to complete the installation of the Magisk app.
- It may also ask to reboot, to fully complete the installation.
27. After the application has been fully installed, your device will be Rooted and with disabled forced encryption!
Fix Secure Folder & Samsung Health
Note: TWRP Backup is recommended in case something fails
Samsung Health:
Required Software:
- A build.prop editor like this
Steps:
1. Install a build.prop editor from the play store
2. Give the build.prop editor root access
3. Open the editor and search for the line - ro.config.tima=1
4. Change the 1 to 0
(Ex. ro.config.tima=1 --> ro.config.tima=0)
5. Save and Reboot the device
6. After the reboot Samsung Health should work as expected
Secure Folder:
Required Software:
- Smali Patcher - Download
Steps:
2. Extract Smali Patcher.zip into a folder
3. Run as administrator
- Wait until it says 'idle..' at the bottom left of the program
4. Uncheck everything checked (like Mock locations, Mock providers, High volume warning etc.)
5. Check Samsung Knox
6. Enable USB Debugging on your phone
7. Connect your phone to your PC/Laptop
8. Press the ADB PATCH button
- A prompt will appear on your phone that asks if you allow your pc to do debugging mode operations on your phone.
9. Press allow on the prompt on your phone
- Wait until Smali Patcher is done.
- After Smali Patcher is done there should be a Magisk module inside it's folder.
10. Copy the Magisk module created by Smali Patcher to your phone
11. Open Magisk and go to Modules (the puzzle piece icon)
12. Tap on the button saying 'Install from storage'
13. Find the location where you've copied the module
14. Install the module
15. Restart your phone
16. If all done correctly, you should be able to set up and use Secure Folder
everything worked, thank you for the nice explanation and your help (A750F)
beytullahgol said:
everything worked, thank you for the nice explanation and your help (A750F)
Click to expand...
Click to collapse
Glad I could help
this one works! thx
Ive no idea which firmware link ot try
*EDIT* Im just waiting for first boot now. So far so good. IIRC first boot takes a while after all this so hopefully job done.
Thanks for guide
Ah ****e, magisk isnt working, says NO for ramdisk.
Root works though so I dunno what the craic is.
Works perfect, thanks!
Thanks, everything works perfectly.
Hello,
I have problem with:
26. Go to all apps and find the application called Magisk
Where I can find it, maybe I'm looking wrong, I can't find it. I didn't have error during install Magisk by TWRP, I don't have root device, what's going on, any can help me?
I installed the same firmware (the patch was from November 2020).
Tubeczka said:
Hello,
I have problem with:
26. Go to all apps and find the application called Magisk
Where I can find it, maybe I'm looking wrong, I can't find it. I didn't have error during install Magisk by TWRP, I don't have root device, what's going on, any can help me?
I installed the same firmware (the patch was from November 2020).
Click to expand...
Click to collapse
Did you flash Magisk v21.4 via TWRP?
Zanci19 said:
Did you flash Magisk v21.4 via TWRP?
Click to expand...
Click to collapse
Yes, I had to restart phone (or I have to longer waiting after configure and first start system)
Maybe someone will have a similar problem
5. Change the Magisk extension from .apk to .zip (Ex. Magisk_ver.apk --> Magisk_ver.zip)
Click to expand...
Click to collapse
I have to change on android (win10 I have a problem)
17. In the AP slot, select the TWRP Recovery (which is in .tar archive)
Click to expand...
Click to collapse
I selected ZIP file, not .tar
how to knw which firmware download its 2022
thanks for this guide! work well after 2 tried, also to answer the comment above me, you have to download the firmware from november 2020.
Спасибо!