Database Info

[ROM][4.1.2] Goclever TAB R70 (RK2926)

This is (to my knowlodge) the very first CM port to Rockchip RK292x device.
This is a beta build of CM10 (Android 4.1.2)
Things that work: (Updated 02-13-2014)
- CM10
- Wifi
- Audio
Things that don't work
- camera (captures few frames, then freezes)
- rotation is off by 90 degrees
Install
CWM flashable image
Download:
Check the download tab above: cm_rkr70sdk-ota-eng.markus
Added working boot and recovery (CWM 6.0.2.8) images next to ROM
Extras
http://goo.im/gapps/gapps-jb-20121011-signed.zip (Gapps)
Please give Your feedback and if someone can chip in, it would be a real help!
XDA:DevDB Information
CM10 port for RK292x device, a ROM for the Android General
Contributors
Shmarkus
ROM OS Version: 4.1.x Jelly Bean
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Alpha
Beta Release Date: 2014-03-03
Created 2014-02-01
Last Updated 2014-02-13

Just tested this on my Beneve Kids Tablet, it has the same specs as Goclever TAB R70 except the screen resolution is higher. Apart from some trouble with sensors for rotation its working really well. Its way faster than stock rom. Looking forward to future releases.

oddhap said:
Just tested this on my Beneve Kids Tablet, it has the same specs as Goclever TAB R70 except the screen resolution is higher. Apart from some trouble with sensors for rotation its working really well. Its way faster than stock rom. Looking forward to future releases.
Click to expand...
Click to collapse
Thanks for Your feedback. I'm back doing this project after a small break! The camera rotation error is caused by kernel. Rockchip guys have done a dirty hack somewhere!
If You'd like, I could try to build a kernel from source for you. But I can only do this if You can pull Your kernel config from the device
Code:
adb pull /proc/config.gz ./
This feature can be disabled though (I know my device doesnt support this and it's a pain to figure out kernel config from scratch)

@Shmarkus I know I'm resurrecting an old thread here but I was wondering if I would be of some help whether as a tester or developer for this ROM of yours (Great work BTW). I have a question though is it stable enough for daily usage...

FLAmbuRNE1 said:
@Shmarkus I know I'm resurrecting an old thread here but I was wondering if I would be of some help whether as a tester or developer for this ROM of yours (Great work BTW). I have a question though is it stable enough for daily usage...
Click to expand...
Click to collapse
Hi! I think this ROM isn't just quite daily driver ready. All my sources are available at github! I haven't really done anything since the release of this ROM, so it is all quite foggy today The main stumbling block for me was the kernel, since I didn't find the correct drivers for the touchscreen (the rest worked quite ok). @FLAmbuRNE1 if you have time and motivation, then I can give you some pointers but I won't be developing it myself.

Alright man, thanks. I'll try my best but this will be my first time developing from actual sources (Thanks mediatek).

[ROM] Flyme OS Latest 4.5.4.2 for Mi4i

Hi all my dear Miui users,
Finally the wait is over and you can download all new Flyme os for mi4i not just flyme can be called Fly me. As i see most of them waiting for an eye-striking Rom without any bugs I Present you the Flyme. This is the UI for Meizu phones, and also an customizable rom with hidden features leaving us in a mystery.
What is flyme OS ?
Flyme OS is a stock and after market firmware developed by Meizu for smartphones based on the Android operating system. Some its key features are completely redesigned apps, one-handed usability and performance optimizations. The initial version, Flyme OS 1.0 based on Android 4.0.3 was released on Juny 12, 2012. It was praised by critics for its simple yet beautiful interface design. Flyme OS 2.0 was released later in 2012 . It brought improved cloud services and build-in root support, among other improvements. Flyme OS 3.0 was released together . It was one of the first Android firmwares to integrate a flat UI. Since Flyme OS 3.0, Dirac HD Sound is integrated, bringing an improved audio experience through a certain number of ear and headphones. The successor the Flyme OS 3.0, Flyme OS 4.0 was released in 2014.The current version of Flyme OS, Flyme OS 4.5, is based on Android Lollipop.
So to start enjoying Meizu in your phone [ I mean Flyme os in Mi4i ] .
Requirements for flashing Flyme:
A working Mi4i phone with enabled USB debugging
To enable USB Debugging Tap on MIUI Version 7 times and go to additional settings then to developer options - scroll down and look for it
Your Mi4i should have either 5.6.11 or 6.6.10 MIUI version so as not to have any bootloop
Rooted phone with a custom recovery like TWRP installed [ twrp is recommended]
Download Gapps and Flyme for Mi4i in root of your device storage with links at last
Phone Battery Charged Above 70% At Least.
Backup the original system data (contacts, SMS, application data, etc.)
INSTALL INSTRUCTIONS
Boot into recovery
Clear Data.
Clear Cache.
Clear Dalvik Cache.
Flash flyme_MI4I file from from internal SDCard.
Clear Cache and Clear Dalvik Cache.
Reboot.
Note in the initial boot it takes 5-10 minutes and phone gets hot like red hot iron. and after booting then retart and install Gapps
Disclaimer : I didn't created this ROM, i am just sharing this ROM itself without making any modifications and source link is provided below. If anybody wants more info then he/she can visit the source link. Thank You !
Download ROM
http://www.mediafire.com/download/38wdprwliedh21q/flyme_ferrari_moonlight_4.5.4.2R.zip
Gapps : http://opengapps.org/
credits:
original thread created by
faisal337

Trying this just for the gestures...

mmxandy said:
Hi all my dear Miui users,
Finally the wait is over and you can download all new Flyme os for mi4i not just flyme can be called Fly me. As i see most of them waiting for an eye-striking Rom without any bugs I Present you the
Note in the initial boot it takes 5-10 minutes and phone gets hot like red hot iron. and after booting then retart and install Gapps
Disclaimer : I didn't created this ROM, i am just sharing this ROM itself without making any modifications and source link is provided below. If anybody wants more info then he/she can visit the source link. Thank You !
credits:
original thread created by
faisal337
Click to expand...
Click to collapse
Hi, nice find.
Can you give us a link for the original site/forum, so we can see what the development is?
What bugs are fixed etc.?
etc.etc.etc.
Thanks.

Theres no development thread. Only a chinese blog saying the same things in both threads...

elot01 said:
Hi, nice find.
Can you give us a link for the original site/forum, so we can see what the development is?
What bugs are fixed etc.?
etc.etc.etc.
Thanks.
Click to expand...
Click to collapse
here you go
http://en.miui.com/thread-193633-1-1.html

mmxandy said:
here you go
http://en.miui.com/thread-193633-1-1.html
Click to expand...
Click to collapse
Thanks.

does everything work?
camera? does its better than other cusrom?

I flash this rom today, but mobile network can not activated. I set an APN, turn on the setting and others which necessary, but still not active.
Sent from my MI 4i using Tapatalk

I could not switch to 4G. Could not change theme.
Sent from my MI 4LTE using Tapatalk

[ROM][5.1.1][A6000] ***Pure NexusOs 9.8.3 ***

Presenting Pure NexusOs 9.8.3 For Lenovo A6000/Plus Builded By Mr.Chan/Herman Koeman with Few Modifications By Me.
This is a pure builded rom with Nexus features and latest Tweaks and Modified to give user extreme Battery Life while Maintaining High Performance
Features:---
-Nexus features
-Nexus Ui
-Best performance and stability
-Good Battery Life
-Kernel Tweaks
-Lollipop features
-Status bar tweaks
-Themes supported
-Excellent camera quality
-Beautiful and Modified UI
-Lockscreen tweaks
-Recent panels
Note:-- I am not responsible if yo brick your device or anything happened during flashing
Requirements:
Your device should be on Stock Lollipop ROM (if you still on Kitkat you must upgrade to Lollipop first,
Install TWRP Recovery JavTwrp from here https://drive.google.com/file/d/0B15QzivpF7lec2RtYTk4cHNUaUk/view
Download NX ROM from here https://drive.google.com/file/d/0ByjAgTuxsUayM0FkUC03NVZjX3c/view
NX Google Services (Gapps) here http://sh.st/nopkn
Patch for fixing camera here https://drive.google.com/file/d/0ByjAgTuxsUayNmxHTVR0dW1uc1k/view
-Bugs ::----
None,you tell me if exists
Installing NX on Lenovo A6000:
Copy the ROM and GAPPS in your SD card
Boot into Recovery
Switch off your device
Reboot to TWRP recovery ( tutorial here )
Make full wipe including “system” (data, dalvik, system, cache)
Now go back and click install
Search for the ROM that downloaded before then flash it
Reboot (the first boot can take up to 2 minutes)
Contributors
Deelie,Flourmo,Mr.Chan and Stuepd
XDAevDB Information
Nexus Os for Lenovo A6000/plus K30-T
ROM OS Version: 9.8.3
ROM Kernel: 3.10.x
Version Information
Status: Stable
Current Stable Version: 9.8.3
Created 2016-02-03
Last Updated 2016-02-03

Is this rom 32 bit or 64 bit??

klvenkatt said:
Is this rom 32 bit or 64 bit??
Click to expand...
Click to collapse
32 bit

How used external storage as primary storage plzzzz
Lollipop all external by default

I was wondering how is the battery back up of this ROM? Headphones working OK? and lags?

Sourav_8434 said:
Presenting Pure NexusOs 9.8.3 For Lenovo A6000/Plus Builded By Mr.Chan/Herman Koeman with Few Modifications By Me.
This is a pure builded rom with Nexus features and latest Tweaks and Modified to give user extreme Battery Life while Maintaining High Performance
Features:---
-Nexus features
Nexus experience ROM is known for its stability and smoothness. Same is the case here.
Marvellous ROM ,SUPER STABLE.
-Nexus Ui
-Best performance and stability
-Good Battery Life
-Kernel Tweaks
-Lollipop features
-Status bar tweaks
-Themes supported
-Excellent camera quality
-Beautiful and Modified UI
-Lockscreen tweaks
-Recent panels
Note:-- I am not responsible if yo brick your device or anything happened during flashing
Requirements:
Your device should be on Stock Lollipop ROM (if you still on Kitkat you must upgrade to Lollipop first,
Install TWRP Recovery JavTwrp from here https://drive.google.com/file/d/0B15QzivpF7lec2RtYTk4cHNUaUk/view
Download NX ROM from here https://drive.google.com/file/d/0ByjAgTuxsUayM0FkUC03NVZjX3c/view
NX Google Services (Gapps) here http://sh.st/nopkn
Patch for fixing camera here https://drive.google.com/file/d/0ByjAgTuxsUayNmxHTVR0dW1uc1k/view
-Bugs ::----
None,you tell me if exists
Installing NX on Lenovo A6000:
Copy the ROM and GAPPS in your SD card
Boot into Recovery
Switch off your device
Reboot to TWRP recovery ( tutorial here )
Make full wipe including “system” (data, dalvik, system, cache)
Now go back and click install
Search for the ROM that downloaded before then flash it
Reboot (the first boot can take up to 2 minutes)
Contributors
Deelie,Flourmo,Mr.Chan and Stuepd
XDAevDB Information
Nexus Os for Lenovo A6000/plus K30-T
ROM OS Version: 9.8.3
ROM Kernel: 3.10.x
Version Information
Status: Stable
Current Stable Version: 9.8.3
Created 2016-02-03
Last Updated 2016-02-03
Click to expand...
Click to collapse
Nexus experience ROM is known for its stability and smoothness. Same is the case here.
Marvellous ROM ,SUPER STABLE.

Battery bug
Every thing is ok but I trace one bug
Automatically battery low and device off
My device Lenovo A6000

download links broken .....

This rom is very smooth
Please make nexus rom based on marshmallow!

Downloading...
under trying.

Please. Why it's necessary to be on stock Lollipop, when prior the flashing we have to perform also a system wipe?

bugs?? gapps link??
Hi
I ve flashed this ROM and is very neat fast and everything working fine.
Too early to say if its a bug, but did have this 2 problems:
1. Could not download gapps from your link so downloaded directly from gapps site for arm, 5.1, 32 bit, full stock version, but unable to flash the same, it says I do not have enough memory, but I have more than 10 Gb free! Anyways flashed nano version and all went fine!
2. Once I noticed the phone went off, while disconnecting from charger, I switched off and reset the device, and so far no issues. Will update asap.
Otherwise very smooth no issues and the camera included, I feel is the best of all ROM's. Thanks, really liked it.
And a very noob question, (I am very new to this custom ROM's concept), When switching on for the first time, saw a screen saying looking for available updates, so my query is whether ROM will also revieve updates (ota)??
Thanks in advance for your effort, time and replies.
Venkat.

klvenkatt said:
Hi
I ve flashed this ROM and is very neat fast and everything working fine.
Too early to say if its a bug, but did have this 2 problems:
1. Could not download gapps from your link so downloaded directly from gapps site for arm, 5.1, 32 bit, full stock version, but unable to flash the same, it says I do not have enough memory, but I have more than 10 Gb free! Anyways flashed nano version and all went fine!
2. Once I noticed the phone went off, while disconnecting from charger, I switched off and reset the device, and so far no issues. Will update asap.
Otherwise very smooth no issues and the camera included, I feel is the best of all ROM's. Thanks, really liked it.
And a very noob question, (I am very new to this custom ROM's concept), When switching on for the first time, saw a screen saying looking for available updates, so my query is whether ROM will also revieve updates (ota)??
Thanks in advance for your effort, time and replies.
Venkat.
Click to expand...
Click to collapse
Hi friend, I've just installed the Rom and I got the 2nd bug, and now I'm reinstalling with my previous Gapp.
---------- Post added at 05:42 PM ---------- Previous post was at 05:17 PM ----------
when I disconnect charger, phone turns off... only the 1st time
but now it's solved with mine Gapps.
camera is excellent really, but just its max resolution is 5 MP, I hope you find a solution for this to obtain also 8MP.

klvenkatt said:
Hi
I ve flashed this ROM and is very neat fast and everything working fine.
Too early to say if its a bug, but did have this 2 problems:
1. Could not download gapps from your link so downloaded directly from gapps site for arm, 5.1, 32 bit, full stock version, but unable to flash the same, it says I do not have enough memory, but I have more than 10 Gb free! Anyways flashed nano version and all went fine!
2. Once I noticed the phone went off, while disconnecting from charger, I switched off and reset the device, and so far no issues. Will update asap.
Otherwise very smooth no issues and the camera included, I feel is the best of all ROM's. Thanks, really liked it.
And a very noob question, (I am very new to this custom ROM's concept), When switching on for the first time, saw a screen saying looking for available updates, so my query is whether ROM will also revieve updates (ota)??
Thanks in advance for your effort, time and replies.
Venkat.
Click to expand...
Click to collapse
Thanks for report

Battery bug
This ROM is working grate only problem is battery automatically increases battery percentage and automatically decreases pls fix this bug

ROM is smooth but ....
battery goes down randomly and phone shutdowns
can't use the ROM more than 15 mins

Battery issue
Please fixx Battery Issue wit my lenovo A6000 Plus its geting shut down when even my phones battery is on 89%........

Custom rom marshmallow

MARSHMALLOW ON HTC J BUTTERFLY / HTL21
hello bro.. i am a htl21 user. i use this rom and work smoothly. thanks to rom's dev bro tako0910. This rom based on CM Rom.
bug : camera stoped or not work (fix it with opengaps arm.6. stock) and nothing bug detected still now..
any one can try .
this link https://www.androidfilehost.com/?w=files&flid=4622&sort_by=date&sort_dir=DESC
#When your camera not work fine, you can try this https://drive.google.com/file/d/0BwNJajHJTjLZU0hLSmVxOWUxY1E/view

How to install :
Before you do this back up your data. Resiko ditanggung penumpang (indonesian lang )
1. Download rom (link on first post)
2. Go to twrp (twrp must ve v. 2.8.x or higher)
3. wipe data/chace
4. install rom.zip (downloaded rom)
5. wipe again than istall opengaps (opengaps arm.6.stock recomended).
6. wait and wipe again than restart system.
7. Enjoy with your Marshmallow..

i have some question , i found the newest rom has been published in 2016-11-23,and this rom is based on cm14 or cm13?
anthor question is whether i must flash opengapps after flash rom,if not ,what will happen?
thanks!

so, post this link or the file for us. i'm going to flash my 920d from stock and i can't decide what rom to flash: this (mb newer) or flyme 5.
i used flyme on my htc one this summer and i'm pleased, just a little simple interface. I think this rom will be a little more interesting. so drop your link, please.

Wow. He's still working on CM14.1 for this phone! Still not stable, but this is very interesting. If I still had a working HTL21 I would flash it.

I've tried his all five Lineages with IMEI null problems, still found no workaround yet.
RR or FlyMe is good but I missed the original Beats Audio. No more valuable options on them, though. Have tried InsertCoin also on my htl21 with random app crashes.
Currently using Sense Lollipop SoulUI as daily driver and this is by far the most stable and power wise ROM I've ever used

erlange said:
I've tried his all five Lineages with IMEI null problems, still found no workaround yet.
RR or FlyMe is good but I missed the original Beats Audio. No more valuable options on them, though. Have tried InsertCoin also on my htl21 with random app crashes.
Currently using Sense Lollipop SoulUI as daily driver and this is by far the most stable and power wise ROM I've ever used
Click to expand...
Click to collapse
Good to hear from someone who tried his Lineage roms.
Personally, I found the official CM 12.1 roms for Droid DNA converted using yutokt's converter to be the most stable and useable when I was using this phone.
And there are several hacks you can find on XDA to add Beats Audio to any rom.

Hi,
Can anyone help me on can i use this custom rom for my HTC Butterfly J?
Android Version: 4.4.2
HTC Sense Version: 6.0
Software Number: Soul_xiaoxiang8002_X21 .0
HTC SDK API level: 6.20
Kernel Version: 3.4. 10-SchKernel-KK-Sense-OC-Beta [email protected] #1 SMP PREEMPT
Baseband Version: 1 .00. 10. 1127_3
Build number: 5.11.66.8 CL334166 release-keys
I can give more information if needed but Please Help me
Thank You!

[ROM]AOKP Marshmallow for Huawei P9

Hello All! I Want to post my AOKP Marshmallow Rom.
I updated source code,so it has build to the newest AOKP source code.
What Works:
Dual Sim: Working on it
NFC: Working on it
USB Charging : Ok
USB ADB : Ok
USB MTP : Ok
Video : Ok
Video Playback: Sometimes it bugging.
Audio : Ok
Sensors : Ok
Screen rotation : Ok
WLAN : Ok
WLAN Hotspot : Ok
GPS : Ok
GSM : Ok
GSM Data : Ok
GSM Voice : Ok
GSM SMS : Ok
Bluetooth : Ok
NFC : Ok
Camera : Ok
FM Radio : Ok
Keyboard : Ok
OTG : Ok
Fingerprint Sensor: Ok
Bugs:
You tell me.
It Works well with Xposed mod.
Download Link: aokp_eva_mm_unofficial_2016-12-08_0906
NEW UPDATE!!!: aokp_eva_mm_unofficial_2016-12-13_0520
The last build need deep sleep fix libs... lib and lib64: lib64
Delete 2 libsurfaceflinger libs from /system/lib and lib64 then copy the new libs and add 644 permission for the pasted libs.
Screenshots:
Frequently Asked Questions + Useful info:
- The first boot will always be slow. This is because once you enter your google account details it starts updating the google apps and your personal details, while downloading your own applications as well
- The rom does not include Huawei's own services and user interface
- The rom is rooted by default
- After first boot, turn off NFC (or at least try to remove the check from the checkbox, it will not be possible due to a bug), then reboot the phone. After this you will be able to turn it on/off as per usual.
- The rom contains TWRP recovery (power+volume up=TWRP)
- To enable "Developer Tools" & "Performance" menu options, navigate to "Settings->About Phone" and tap "Build number" 4-5 times
- It is not possible to update a rom OTA, only from recovery. The method of updating the rom is the same as installing it from step (3), the only difference is that the "-d: wipe data/factory reset" part needs to be skipped
- You can make the Google search bar disappear from the home screen by opening the settings menu of the Trebuchet launcher via long press. Then expand the advanced settings by swiping up the grey bar of Wallpapers Modules Themes. Here look for the Search bar and switch it off.
Source codes:
AOKP
Device tree:
EVA Source Code
Credits:
-NexXuSKa
-Surdu_petru
-AOKP Team
-CyanogenMod
Sorry for my bad English!
XDA:DevDB Information
AOKP-MM For Huawei P9, ROM for the Huawei P9
Contributors
NexXuSKa, surdu_petru
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOKP
Version Information
Status: Stable
Current Stable Version: aokp_eva_mm_unoffici
Stable Release Date: 2016-12-08
Created 2016-12-08
Last Updated 2016-12-08

i cant start this ROM... he aks me for a Passwort to start this ROM.

nighty said:
i cant start this ROM... he aks me for a Passwort to start this ROM.
Click to expand...
Click to collapse
Flash via Surdu's TWRP will solve this problem.
Sent from my HUAWEI P9 using XDA-Developers mobile app

The new HWC is worse than stock. I build next release with stock HWC will solve thermal problems. The ROM isn't stable now. If you want to use the ROM as daily driver,you need to wait tomorrow i will build and upload fixed build.
Sent from my HUAWEI P9 using XDA-Developers mobile app

hei great i will wait for the newest release...... and flash then wit the othe twrp

nighty said:
hei great i will wait for the newest release...... and flash then wit the othe twrp
Click to expand...
Click to collapse
I working on it!?
Sent from my HUAWEI P9 using XDA-Developers mobile app

NEW UPDATE IS OUT!!! HWC Fixed! But if you flash the newest rom,you need to replace libs,you find it on the post! Happy Testing!