Related
Hi Lads,
My HTC touch diamond is doing strange, one day I woke up and suddenly it gave me a Red,Green,Blue,White screen. As I understood it's called bootlloader or something like that.
I tried reset+volumebutton after that it is starting normal and Ive got my phone back, but if I turn my phone back off its gaving me the terrible Red, Green, Blue, White screen back.
Ive tried to do a hard reset ( reset button + volume + round button) but then I have to press the volume button again to accept, but it isnt doing anything then.
Ive looked for some solutions but everything is chinese for me.
I just want my phone back to normal and I hope I dont have to loose all my files.
Can anyone help ?
Thanks anyway lads
Well, if possible, Backup all of your Data using either SPB Backup or Microsoft MyPhone, and reflash a new ROM.
This is what most users will tell you to do.
I think once a device encounters the Bootloader Infinite Loop issue, the only solution is to Flash a New ROM.
and how can I do that ? I am really a dummie at this point.
But it still works only if I put it back on I see the bootloader again.
jonaszw said:
and how can I do that ? I am really a dummie at this point.
But it still works only if I put it back on I see the bootloader again.
Click to expand...
Click to collapse
..better post in the diamond thread. I am sure you will get help!
Maybe HardSLP?
Any update on your progress?
Curious as to whether or not you got the issue fixed.
[If you can get into the Bootloader, you can Re-Flash your device.. just keep it plugged into your computer when you restart your device.]
check my sig for a n00b tutorial
My first rom is LGP920-V08i-APR25-2011. I upgraded it with V10b_00.kdz. However the O3D turned off after booting. If I connect with USB cable, it is working well. but battery level is zero. if I disconnect the cable, it turned off. It is impossible to charge. The level is zero and blinking. So I upgrade it with V10d with rom manager. However the result is same. I didn't back up my phone at first time Is there any solution?? Help me...
Did you try removing the battery for a while and then putting it back in?
Take out the battery and clean the contacts carefully by scraping with a penknife or similar. Do this to the phone connectors too. Sounds like bad/dirty contacts to me.
Sent from my LG-P920 using XDA App
I have another battery. the result is same. If I work in the ClockworkMod Recovery, the battery works well. This problem is about system....
So, the battery charges when you are in clockwork recovery?
I can work in clockwork recovery without USB cable just with battery. That means lg rom system can not recognize the battery in S/W. actually battery is no problem.
You could try wiping your Dalvik Cache (just to be sure) and wiping your Battery Stats through Clockworkmod, maybe it helps.
I can wiped Dalvik Cache However it is impossible to wipe my Battery Stats through Clockworkmod. The result is same.... Do you have another idea to solve the problem??
Why my O3D can not wipe Battery Stats in the Clockworkmod? If I do this, there is no massage and retune to advanced menu. Every options except Wipe Battery Stats work very well... why?????
Nobody knows how to solve this problem?? Pls help me. Thanks
Are u using the original wall charger? LG charger that is. I have plenty phones that won't charge on computer USB when completely dead or even with aftermarket wall chargers. Also some phones are actually smart enough to tell if u are not using an OEM spec charger.
Sent from my MB860 using XDA App
Thanks for your reply. I tested my battery in my friend's O3D. And it works very well. I
think I have to use another rom/firmware...
I decided to wait Cyanogenmod on O3D. Thanks everyone...
Good luck . Let me know what happens if u try the old rom or did u already.
Sent from my MB860 using XDA App
Im having the same problem...The battery is full but it says 0% and and closes itself after booting if not connected to USB or power source.
anyone found a way to fix this? I'm having the same problem
zweetz32 said:
anyone found a way to fix this? I'm having the same problem
Click to expand...
Click to collapse
Me too!, same problem with a ROM KingMod
I set my phone for Stock & Recovery firm, unrooted. Nothing doing! I give up, nobody knows how to solve this problem. I'm totally frustrated with it.
Ratzenberger said:
I set my phone for Stock & Recovery firm, unrooted. Nothing doing! I give up, nobody knows how to solve this problem. I'm totally frustrated with it.
Click to expand...
Click to collapse
Hey man.... i posted in other topic and i don´t think anybody tried.... try to get the batterystats.bin file with someone who has a normal file. Try to put it in the right directory, it sounds stupid, but perhaps it can work, tell me later!!!
Using Root Explorer: data>system>batterystats.bin see if the file is there and if not, put there a normal one
jhonnyjhonny said:
Hey man.... i posted in other topic and i don´t think anybody tried.... try to get the batterystats.bin file with someone who has a normal file. Try to put it in the right directory, it sounds stupid, but perhaps it can work, tell me later!!!
Using Root Explorer: data>system>batterystats.bin see if the file is there and if not, put there a normal one
Click to expand...
Click to collapse
I tried it today, did not work. I tried also deleting the file, and restart the device, nothing!
I think this problem occurs with some specific versions of this model (not for sale), like mine. I don t believe that I spent $ 600 a paperweight: (
HI ALL,
i have unrooted my phone and then i,ve updated my phone but i forgot to remove clockworkmodrecovery now when i reboot my phone it keeps getting in recovery mode
Is there anyone who can help me?
I have the exact same problem!
I've tried restoring a backup, rebooting the phone, turning it off, install update from sdcard, formatting cache...
None to any avail. Please help!
I've tried about every option now, I've even tried downloading a ROM and flashing it to the phone. It still boots into Clockworkmod.
Can I throw my phone in the trash now?
Edit:
I don't have windows XP, so nope to unbricking your O3D guide.
Sdcard
I can only put the rom at my external sdcard i don know how to put someting in the internal flash
I've now tried flashing KingDroid.
It's still in the bootloop.
Why does it seem like no one even cares about this thread?
FPtje said:
I've now tried flashing KingDroid.
It's still in the bootloop.
Why does it seem like no one even cares about this thread?
Click to expand...
Click to collapse
People care but if they don't have an answer for you it's not much they can do, tried pulling the battery I guess and using CWM to reset battery data and reseting to factory defaults etc?
People arent answering because there is already a guide on the forum explaining exactly how to fix this.
Sent from my LG-P920 using XDA Premium App
Echts said:
People care but if they don't have an answer for you it's not much they can do, tried pulling the battery I guess and using CWM to reset battery data and reseting to factory defaults etc?
Click to expand...
Click to collapse
I have tried about every single option in the CWM menus, and I've tried pulling the battery at random times.
None of them worked.
I'm now going to remove Arch Linux from my PC to make room for windows XP. Sorry for my previous outrage.
Next time remove CWM from your phone before updating...
I just installed windows XP and followed the guide to the letter. I am now stuck with the firmware update screen. How do I get rid of this?
Flash rom
I,ve managed to flash the rom with the original v10D but itś still booting in clockwork recovery mode pfffff
These phones really are hard to unbrick.
Tell me please how to exit Rekaveri. Reloading and pulling the battery does not helps, it means everything? brick?
serano3d said:
Tell me please how to exit Rekaveri. Reloading and pulling the battery does not helps, it means everything? brick?
Click to expand...
Click to collapse
If you're stuck at the "updating firmware" screen like me, you're simply ****ed.
http://forum.xda-developers.com/showthread.php?t=1197108
use LG vip service.
I just called them, they said they'd "assess" my situation and that they'd call me back to tell me whether they'll replace it...
restore
Hi,
I have managed to restore a backup image but he is still booting in clockwork recovery what am i forgetting ????
Sincerely Snellie1972
Recover
I have recovered the phone with clockwork recovery with stock file
Optimus 3D 10D pre-rooted CWM restore but still it goes in too clockwork recovery at boot
What am i doing wrong ????
Thanks in advance
snellie1972
Unfortunately I was also able to get passed the clockwork screen but the phone is stuck on the update just like anybody else. I contacted the store where I bought it from and they sent me a prepaid box already to send it to them for repair/replacement.
As everyone says, at the moment it's not possible to recover from that state, sorry snellie.
If you still get the clockwork, then just follow these instructions but even so, you wont get passed the software update screen.
Flash
I have managed to flash using first de KDZ tool from LG en after that i have used te LGMOBILE update tool and just put in my imei and serial and it was downloading and restoring my phone so far so good but when it was Finished without any error it is still haging on update software ...
I don't understand why it is not going any further
Greetz
snellie1972
It's almost as if this firmware update screen is fake and an indicator for LG to see you ****ed your phone up.
Is there any known hacker even working on this?
Hello all,
First, I'm gonna say I'm very very very sorry if this issue has been seen and spoken about before, but I've used search and I couldn't find any problem like this one...
My Sensation was working perfectly, no touchscreen lag, all was fine. After latest update touchscreen, and every button except for power, completely died on me - response-wise. Phone turns on, but not a single button (except power one, like I said) is not working... I've seen threads about rooting, S-Off-ing device etc, but major problem is I can't get into USB debug so I'm kinda out of (known) options
Tried factory reset, no help.
My idea of problem is that updated ROM is the problem, and if I somehow manage to flash stock ROM I would be good to go. But with all those S-Off/On, root, BRICKING issues, I wouldn't want to risk it
Thanks for any help you provide in advance, and I must say sorry again if this problem was answered before - I couldn't find it with search...
Update
If I were you I would exchange the phone and run the update again. It sounds like a freak accident to me. As for myself I've noticed a major improvement in performance since the update, to disregard it would be detrimental.
traktori said:
Hello all,
First, I'm gonna say I'm very very very sorry if this issue has been seen and spoken about before, but I've used search and I couldn't find any problem like this one...
My Sensation was working perfectly, no touchscreen lag, all was fine. After latest update touchscreen, and every button except for power, completely died on me - response-wise. Phone turns on, but not a single button (except power one, like I said) is not working... I've seen threads about rooting, S-Off-ing device etc, but major problem is I can't get into USB debug so I'm kinda out of (known) options
Tried factory reset, no help.
My idea of problem is that updated ROM is the problem, and if I somehow manage to flash stock ROM I would be good to go. But with all those S-Off/On, root, BRICKING issues, I wouldn't want to risk it
Thanks for any help you provide in advance, and I must say sorry again if this problem was answered before - I couldn't find it with search...
Click to expand...
Click to collapse
wird, but try to put it in recovery mode, hold the lower volume button, and turn it off while still vol down. After this you should go to recovery, and then connect the phone to reflash original firmware
Hi all,
I have an issue where my tablet keeps rebooting. Unfortunately it works for a few seconds and then reboots. I have some important files so a factory reset is not really an option... Can you please guide me to at least how I could recover the files?
Thanks in advance guys.
Bad E-MMC
bedobela said:
Hi all,
I have an issue where my tablet keeps rebooting. Unfortunately it works for a few seconds and then reboots. I have some important files so a factory reset is not really an option... Can you please guide me to at least how I could recover the files?
Thanks in advance guys.
Click to expand...
Click to collapse
That is definitely the e-mmc problem. I have experienced the same thing and it required replacement..
your e-mmc is damaged, therefore your Rom reads the data but it cannot write into it, so it reboots itself.. you can no longer reset your tablet. .once factory reset is completed and it reboots.. all applications remain , within couple of seconds, it reboots all over and over..
Consider buying a new mainboard... replace and flash..
hope it helps..
boot into safe mode. it will allow you to recover your files and save them on a laptop.
you can search for how to boot into safe mode on google. i had a similar problem
corixio said:
boot into safe mode. it will allow you to recover your files and save them on a laptop.
you can search for how to boot into safe mode on google. i had a similar problem
Click to expand...
Click to collapse
safe mode won't work because the emmc chip is set to read only. so there is nothing you can to get you files back.
theportal2 said:
safe mode won't work because the emmc chip is set to read only. so there is nothing you can to get you files back.
Click to expand...
Click to collapse
Copying files is still possible even when the chip is set to read only