I received a case for review purposes from Roocase. I love it and I am using it as my daily case!
I had used an OtterBox case with my previous phone. The basic design of the Roocase is similiar; a soft inner shell and and a harder outer shell. But there are some important differences.
The Roocase has a built in screen protector, which is great. The back design includes raised surfaces at the corners to protect the camera when you lay the phone on its back. This is very well thought out and works great.
My favorite part is how the button (On/Off and volume) covers work. They are responsive enough that you don't need to really squeeze down as I had to with my OtterBox in the past, yet offer enough protection that I don't need to worry about keeping my phone in my pocket.
The case adds some size and weight to the phone, of course, yet the S6 still feels very comfortable in my hand.
A well designed and constructed case perfect for daily use.
My Amazon review is posted here: http://www.amazon.com/gp/customer-r.../ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B00SIG5KFS
At least give us some real pictures.
Thanks for the review!
the built in screen protector is plastic with rainbow effect. The two part case is a pain to take apart. The hard poly-carbonate part is so hard and sharp I am afraid it will scratch my phone when I will try to take it off. The protection is good but I would rather pay more for a decent screen protector than go with this plastic rainbow laden built in screen protector. By the way I basically ruined he case while trying to take off the built in screen protector. that's my fault though.
Again very flawed design.
Related
I purchased the Body Glove hard case (matrix) and am quite pleased with it. While it isn't perfect, I can't see there being much better for this phone.
Aesthetics.
I think it looks pretty slick. The back is pretty flashy and it looks pretty good on the phone. It doesn't cover much of the face itself, which I think is good since I have a screen protector and it doesn't inhibit the track pad.
Protection.
I haven't dropped it yet, but it does sport a protective felt-like pad on the back side so it won't scar the metal back. The front does provide enough protection that if it landed on its face, I think it will provide enough gap between the concrete and the screen - about as much gap as my iPhone's case which has survived me 2 years and many drops on the face. It's a functional, protective case, we can leave it at that.
Use.
It snapped onto the phone surprisingly well and doesn't inhibit any functionality. It slides out of the pocket very easily (just as well as a naked phone, probably better than a gel case) and only adds a little extra bulk...overall it is only slightly larger than my iPhone 3g, but that is just the added keyboard. The weight added is negligible.
Issue.
My one complaint is that the case is not as rigid as hard cases I am used to. The part around the screen is flexible, and as you can see in some photos I attached, it really does bow out when given the right amount of pressure.
Overall.
Awesome case: looks nice, provides enough protection (IMO), and doesn't interfere with other photo functions.
Also, I have added the T-Mobile anti-smear/anti-glare screen protector, which works great:
The feel is good - right now it might be a little to clean and my fingers don't swipe to great - i'll follow up on this as I use the phone more.
It covers MOST of the screen..you can see in my first photo that there is only a little piece of screen (the bottom of the buttons) that is uncovered.
It hides finger prints and smudges like a champion and doesn't take away from the screen clarity IMO - but I've always used a anti-glare screen protector, and i don't notice any sort of grainy-ness.
Doesn't take away from the responsiveness of the buttons on the bottom.
My phone is yet to be activated (company line), but overall just playing around on WiFi for a few hours, I am very satisfied and would recommend this combination.
I purchased the body glove case, and I do not like it at all.
It seems a lot thinner and cheap compared to other bodyglove cases.
At 29.99 in the T-mobile store it is a rip-off. I am going to buy the oem one...it seems sturdier at half the price.
Just saw this body glove case with kickstand for $11
http://www.amazon.com/Body-Gloves-Glove-Snap-T-Mobile/dp/B0042AH37M/ref=pd_sim_cps_3
Anybody tried this before? Good deal?
I bought myself the Exspect Desire HD case, installed the screen protector and took some pictures. Here is a little "review" of the case.
First of all, the screen protector. I have to say, this is one of the best screen protectors I have tested, and I have had a few for different devices. Like most screen protectors, it is very clear, you do not even notice that it is there. It is easy to apply, and if something goes wrong (like I had some dust under it), you can just peel it off and try again. The best thing about it is that it is not sticky. For example ZAGG screen protectors feel sticky, and you cannot slide your finger that easily on them. This screen protector actually makes the screen more slippery!
Then to the case. The first thing I noticed is that it has quite bad design for the camera. Normally in DHD the camera protrudes quite a bit, but this one makes it even worse. The silicone has a cheapo -looking texture, and the protruding bit is very flimsy. I actually cut it down with scissors, and finished the cutting with some sand paper.
The case itself is not bad, it fits around the DHD very well. It does not make the device bulkier, so it is ideal for users who want to keep their phone slim. The rubbery silicone gathers quite much dust, and it is not very easy to clean. It is sticky, which makes the phone harder to pull out of a pocket. I think that this applies to most cases, so it is not really Exspect specific problem. The quality of the silicone is very good.
All in all I like the case, and I will start using it daily instead of my PO 520 leather case (at least for a while). I also bought the Otterbox case, and if this review gets feedback, I will probably post another review about it when I get it.
Cheers for this.
I'm certainly interested in the Otterbox review if you do it.
That Exspect does have a lot of dust yeah. That would put me off I think, but I'd like to see one anyway.
jkoljo said:
Then to the case. The first thing I noticed is that it has quite bad design for the camera. Normally in DHD the camera protrudes quite a bit, but this one makes it even worse. The silicone has a cheapo -looking texture, and the protruding bit is very flimsy. I actually cut it down with scissors, and finished the cutting with some sand paper.
Click to expand...
Click to collapse
i agree with everything apart from this section:
- i like how it extends further than the lens, when i put it on a desk, i protects the lens
- the silicone is actually very high quality and i think it is very good, obviously you;ve never gotten a cheap unbranded silicone case from ebay
Yeah, and I have to say, my standards tend to be quite high
The silicone itself is very nice, but the block texture puts me off.
Would be interesting to see how well the screen protector performs. I managed to get a couple of different makes for a couple of iPhone users - noticed they showed finger prints quite badly
The screen protector does show finger prints, but I would take the additional slipperyness over naked screen any day.
jkoljo said:
The screen protector does show finger prints, but I would take the additional slipperyness over naked screen any day.
Click to expand...
Click to collapse
I have the expect housing. It does collect dust nothing to worry about really. The case for the price is excellent.
Personally I don't like using screen protectors. I think they show up all sorts of scratches and marks. I've not used one since release day and there's not a mark in my screen. I had my Hero for 15 months with no screen protector and not a mark on it when I sold it.
Sent from my Lee DrOid Loaded Desire HD
Thanks for the review. I have one on order, it should be here this week. I am currently using case mate silicon case which looks exactly the same as the exspect without the textured design. I ordered yhe exspect because it looks like its going to protect the camera because of the protruding surround which you didnt like. Well see how I get on when it arrives. Im also interested with otterbox but it looks bulky.
Hi, I also own one of these cases and i'm very happy with it. The screen protector is excellent, it picks up prints same as any other SP, but it's the best one i've had in terms of screen response and usability.
All in all, it's one of the better phone cases i've ever used and the screen protector that comes with it is excellent. Would recommend.
I got mine today and I am very disappointed with this case. It seems like the manufacturers focused on presentation and packaging but the actual product is crap. First its a bit loose, second the front of the case, the bit that goes around the screen does not grip properly because it barely goes around the screen not like the casemate silicon case. The only thing I like is the camera surround protetcs the camera well. I cant comment on the screen protector as I havent used it yet. Don't buy this product.
Edit:
Also forgot to say the buttons are not aligned properly and are difficult to press.
Edit 2:
I find this case easy to slip in and out of my pocket compared to the casemate safe skin:
http://www.carphonewarehouse.com/ph...essories/buy/CASEMATE-DESIRE-HD-SAFE-SKIN-BLA
Mine fits well, but it is not exactly tight. The buttons in my case are properly aligned, and it is easy to operate the phone. I think that the case comes off the phone a bit too easily, though.
After getting an Otterbox Defender case for my iPod Touch and liking the level of protection it gave, the minute I bought my Atrix 2 I hoped they made one for it. Luckily they have a couple cases for it, the Commuter and the Defender. After careful consideration I went with the Commuter for a few reasons, less bulky, I don't use hip holsters and I thought it would be like the Defender for my iPod and have a built in screen protector....Since the screen on the A2 is beveled on the edges I didn't think that would work out too good. I bought my case on Amazon from a seller named "Alwayz on Sale" for $24.99 + $4.48 shipping. My experience with this seller was as expected, quick order processing, quick shipping, product arrived as advertised, even a couple days early too. Just received it this afternoon and installed it this evening when I got home from work, here's my take on it.
The case consists of two parts, a silicone sleeve and a polycarbonate shell. Also included are a self adhesive screen protector, a screen cleaning cloth and a "squeegee" card to help push the air bubbles out from under the protector. The first thing I did was mocked up the screen protector to see how it fit. This is a major fail by Otterbox! The protector does not cover the whole screen, it just covers up to the beveled edge of it. Not only that but at the top where the cutout is for the speaker and camera is there are not separate cutouts for each, there is just one large notch type cutout. And since the camera is lower than the speaker, the cutout goes down far enough to clear the camera and then straight over, then up the right side of the speaker. The end result is some screen real estate not protected by the cover directly under the ear speaker. In the grand scheme of things this is just a tiny part of the screen, but it's a detail that should have been given better treatment. I imagine it would be difficult to produce a self adhesive screen protector to fit like a glove over the A2's beveled screen, I get it, but for those looking for full screen protection this is not the answer.
I was let down with the screen protector but still had high expectations for the case itself and it didn't disappoint. The silicone sleeve feels quality, is relatively thick and seems like it will absorb much of the shock and jarring from falls and what not. It fits nicely on the phone, it's a snug fit like you'd expect. Then came time to install the polycarbonate shell....being the impatient mofo I am I coudn't be bothered to look for instructions on the best way to do this. The shell encapsulates the sleeve/phone so it's not just a slide it into place and move on type of deal. The way I did it was slid the phone with the sleeve installed top first into the shell, then pressed the right side of the phone down into the shell taking care not to put too much pressure or force on the buttons as it slid into place. Lastly I grabbed the left side of the shell and kind of bent it backward, if that makes sense, and pushed the phone down into place and let the shell go so it "grabbed" the phone and held it in place like it should. I then checked the port covers to ensure they were lined up right and opened and closed properly, then tested the buttons to make sure they were lined up right as well. No problems here.
With the case fully installed I inspected it's build quality and fitment and was not let down. No sharp edges anywhere, no molding overhang, the mic opening at the top and bottom of the phone were aligned perfectly, the beveled edges surrounding the rear camera and speaker was a nice touch, ensuring no interference with either. Obviously, the case did add some bulk and weight to the phone but that was to be expected. However it's not an exaggerated bulk, it's just enough to put your mind at ease knowing that if you were to drop your phone, it's not likely to get damaged. The silicone sleeve is borders the face of the phone, allowing you to set it face down without worry of it resting on the screen. The raised buttons are easy to press and make for especially easy locking/unlocking of the phone for people with fat fingers like me. The only thing I don't like, aside from the screen protector, is the lack of silicone in strategic spots on the shell to ensure improved grip. There is none. The shell is just that, a plastic shell, so it's quite slippery to hold. There is so much room on both sides of the phone that they easily could have cut out a large opening in the shell on both sides and allowed the silicone shell to fit in said openings giving much improved grip. That's about the only thing I could see that could be improved with this case. And the screen protector. There is a good thing about the plastic shell though, it should allow easy entry and removal from pockets. That's one that I like about it over the Defender case for my iPod, which is housed in a poly shell with the silicone sleeve wrapped over the shell. And since I keep my phone in my pocket, should work well for me, as long as I don't drop it.
Luckily I had some experience with Otterbox before so when I placed this order I ordered an Xtreme Guard screen protector for it as well. This combo results in 99.9% frontal protection of the phone. The only part not protected is a tiny area above the camera as the cutout for it is a U shaped one, not a circle. I highly suggest the same skin type protector if you go with this case so you get a complete, form fitting screen protection. Overall I give this case 4 out of 5 stars, with a better screen protector and improved grip like I mentioned above, it would easily get 5.
Great write up. I have a speck case which cover the beveled edge nicely just waiting for a decent screen protector.
Sent from my MB865 using xda premium
cuhrazy said:
Great write up. I have a speck case which cover the beveled edge nicely just waiting for a decent screen protector.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Thank you. The Otterbox covers the beveled edge nicely too.
sent from my Motorola Atrix 2 via Tapatalk
Not sure what the issue is but I seem to have developed a case of the butter fingers cause I've dropped my phone 3 times now....not a scratch/dent/scuff on it
What about some pics?
nahuelarg86 said:
What about some pics?
Click to expand...
Click to collapse
That would require that I go get some new batteries for my DSLR....maybe I'll pick some up while out shopping this weekend.
Here you go!
Got this case a few months back from amazon. So far i've had a few falls and it's protected the phone very well. It feels solid and fits like a glove, i'd recommend this case to anyone with an Atrix 2 (save those with an oversized 4000mAh batter).:good:
I've got the Defender and it's awesome !! I rate it 5 stars!
Sent from my MB865 using xda premium
Hello! Poetic kindly provided me with both their Affinity and Revolution cases for review. As there are a bunch of similar threads here on XDA, I'll try to keep this post brief but informative.
General
One overarching statement I can make about these cases is that they have very distinctive designs, and probably won't appeal to those who appreciate a more minimalist aesthetic (e.g. those who use a Diztronic TPU or Spigen Slim Fit case). Style preferences, are, of course, objective, so I'll try to evaluate design based on function as much as form.
Affinity
Click here to buy it on Amazon.com
Album of pics here
Look and Feel - The case I received has an updated design (compared to the image currently on the Amazon page); the "P" logo is now between the cutouts for the microphone and fingerprint sensor, and the "Affinity" branding has been completely removed. I appreciate these changes, as it no longer obscures the phone's own "nexus" logo and overall reduces visual clutter. I've found the clear polycarbonate to be quite the fingerprint magnet; having not used any other clear cases to compare against, I'm not sure if this is a common thing or not. Hard TPU runs along the back, wraps around the corners, camera cutout, and buttons; however, the sides are a glossy plastic with raised bumps. I'm not fond of this plastic because while it does provide some extra grip, it's not quite as comfortable to hold as the rubber ridges on my Speck Candyshell Grip case. The slim profile of this case adds imperceptible bulk to the phone.
Cutouts - I've found no issues with cutouts for the ports, camera, or fingerprint sensor. Regarding the latter, the edge is pretty steeply bevelled, but doesn't feel sharp when I glide my finger over it. The thin profile of the case makes it not really an issue.
Protection - Speaking of the thin profile, the upper lip barely extends beyond the phone's screen; this is great for people who use (practically) edge-to-edge screen protectors. However, there is still enough of a lip for you to not worry about placing the phone face-down on a surface without a screen protector. Having TPU around all four corners should provide a little extra drop protection, as well. I haven't used the case long enough to see whether the TPU on the rear actually reduces scratching of the clear polycarbonate
Final Thoughts - This is a great case for someone looking for a clear back, but also wanting a bit more grip and drop protection than other clear cases on the market.
4/5 stars
Revolution
Click here to buy it on Amazon.com
Album of pics here
Look and Feel - This case is colossal with distinct, military/industrial styling. Personally, I don't really like the fake screws or seemingly-whimsical use of glossy TPU along the sides; if it provides no specific function, I don't think it needs to be a visual element (aside from some branding), in my opinion. If the hard polycarbonate back plate was really bolted onto the second TPU layer, that my opinion would've been different. The Nexus 6P is already a pretty large phone, and this case definitely makes it feel quite a bit bulkier. However, I really like the subtle texture of the TPU along the sides and button covers; it adds a nice amount of grip to an otherwise unwieldy case.
Cutouts - The headphone jack and USB-C ports are guarded by hard plastic and covered with TPU flaps; while I've found no fit issues with my headphones or stock charging cable, those with particularly bulky headphone jacks might run into issues, though the USB port opening is fairly generous. There's a much more gradual bevel towards the fingerprint sensor than with the Affinity case.
Protection - This case is obviously all about protection. The phone is first clipped into a plastic bumper with a built-in plastic screen protector before it's inserted into the TPU/plastic hybrid layer. This thing will be very resilient against drops! Having port covers is great protection against dust. Unfortunately, I found the built-in screen protector to be more of a hindrance than help, as there was a noticeable air gap between the plastic and the tempered glass protector on my phone's screen. This significantly decreased touch sensitivity, and I'd recommend just removing it in favour of a protector directly applied to your phone's screen.
Extra features - Aside from the Seidio Surface, I haven't seen any other phone cases with a built-in kickstand. This one is made of metal and feels very solid - a great addition for those who like watching media and like propping up their phone to do so. There is also a carabiner clip made of the same TPU as the rest of the case, increasing portability as this case is definitely not compatible for those who wear slim-fitting jeans.
Final thoughts - If you work in construction or any other rough/rugged environment, I'd recommend this case for the glut of protective features, short of waterproofness. However, its significant bulk and questionable styling makes me pause to recommend it to an average/casual user who doesn't need this level of protection.
3.5/4 stars
This review is of the Schnail Savior Series Clear Case with Aluminum Frame Military Grade Full Body Protective Rugged Cover in Black for the Google Pixel 4 XL.
Overall I really like this case. I have been using it for the last few days, and I have to say that I am surprised. I normally use Spigen, Caseology and Otterbox cases, but I really liked the overall appearance of this case and wanted to try it out.
When I first received it, it came in two main pieces. The outer frame, which is a combination of aluminum and TPU, and then a hard plastic inner frame. Assembly is pretty straight forward. Clean your phone really well, insert the phone into the plastic inner case, and then nest it into the aluminum and TPU outer case. You will want to get a small flat tool of some sort to help the lip of the TPU surround on the aluminum frame to clear the plastic inner frame. I wish that a tool had come with the phone in order to do so, but I found that a toothpick worked just fine. Once nested together completely, the case has a extremely solid feel. There is no movement like I have experienced before with other nesting phone cases. While this means it can be a pain to disassemble and reassemble, it also means that if you drop it the case isn't likely to come apart.
The quality construction and build seems to be on par if not better than other well known brands that I have owned and used in the past. The use of the aluminum frame is implemented nicely, which just the right amount of exposure, but not so much that it makes the case slippery. The clear backing is nice thick, and the lens cut out accents the raised camera lens very well. The lip provided by the aluminum frame and the rubber/plastic surround gives ample distance from the glass, which means should I accidentally drop the phone, it should avoid cracking the screen unless I happen to land directly on a sharp corner or raised object that strikes the screen directly. If there is one con to this case, it would be the raised lip, especially if you are using the new "swipe to go back" feature that Google has implemented in Android 10. You can still swipe to go back, but there is a bit of learning curve as you will need to press your finger into the edge of the lip before attempting to swipe. I use my thumb to do so, and found that if I attempt to use the edge/side of the my thumb, it doesn't work as well as if I press my thumb flush before swiping. A small sacrifice to make in order to ensure if I drop this phone that the raised edge will protect the screen from harm.
All in all, this is a case that I can highly recommend and will be my daily driver over my Spigen Tough Armor.
So I was sent this case for review as well, and if OP doesn't mind, I would like to 2nd a lot of what is said here.
The case is difficult to put on, but once the case is on I feel like I could throw it off my roof, and have it survive. Not that I actually did that... I had to use a butter knife to get the inner frame under that lip all the way around the front/top, but once the case was on, it felt very solid. Its difficult to disassemble so hypothetically a big drop shouldn't split the case in 2 like some other 2 piece cases have a tendency to do. If I had JerryRigEverything money, I would have loved to test it like that. The camera is well protected by raised edges, but not actually covered. The screen isn't covered either (like a lifeproof case), but I'm ok with that, it means I can bring my own glass screen protector.
As far as look and feel, it is a bit bulky, but thats the price you pay for this much protection. I like the clear back, since Google makes such a big deal about their colors, its nice to still see the back of my phone. The buttons line up properly, and are a little mushy, but nowhere near as bad as some other big cases. I might be the only one who appreciates the little loop holes on the bottom right of the case for adding a wrist strap or something. A Peak Design anchor is probably going to live there forever now. Wireless charging still works, but your mileage might vary, it does add a tiny bit of distance between the charger and the phone. Like OP, I also found the raised lip around the edge of the screen to be a bit annoying, especially since gestures is the new Pixel default. The gestures are harder to use, and there is a learning curve, or just go back to using the soft buttons at the bottom.
Overall, if a lot of protection is what you're looking for in a case, I have no problem recommending this one! Pictures to come, I just haven't had time to get out my real camera and take any.