Database Info

[Q] [I9003][Help] phone doesnot proceed beyond 'samsung' logo

Just today i was connected to my wifi, downloaded a software, 'Expense IT pro' from apktop.com but before completing the install process i terminated it. then i was manually updating cases in 'prognosis' software and suddenly the phone freezes. thought it was usual, so i pressed the power key for a long time and while booting it got stuck in the only samsung logo that glows.
i'm in Bangladesh and the phone was on indian (DD) firmware. battery is shown while charging. i tried to factory reset it (vol up+ power+ home) but nothing is showing up. if i take it to the service center they might take a long time, so i'm planning to flash it with odin. here i need ur help guys coz i'm new:
1. if i flash with European(xx) firmware, first xxkpe then xxkph, will it have any problem in my region, detecting APNs? or something?
2. is there any way to factory reset it without flash via pc, as 3 button is not working for me
3. will it void my warranty?
4. can i use my previous SD card without formatting and install apks from there?
5. i just want my phone back! plz help!!

1 u can use that & choose english as ur language!
2 adb
3 no
4 u can install apk files & have access to multimedia not other things
5 possible!!!
try to read the board full it answers all ur queries

[i9003][help]How to post in the Q&A section?
Create a thread for that first...THrow this this to the Q&A

[Q] Bootlogo_samsung stuck.may be softbrick. Help needed.

*URGENT HELP REQUIRED*
Rooted a core, then UnRooted it for software update.super su was installed but disabled and device was shown unroot succesful by framaroot.device status was official.then, i downloaded the update. The phone restarted and now it gets stuck at samsung logo,it just glows indefinitely. When pressing vol down and menu/home key and starting it shows custom os, volume up to continue, volume down to cancel and restart phone. When pressing down.again it gets stuck at samsung logo and when pressing up says to not disconnect and shows update and odin. Recovery mode by pressing vol.up and menu is also working. I have no backup. Screenshots below.
*No backup made.
*Have another galaxy core.non rooted and working. Will making backup of it work on my phone. Both are Same model i8262(duos).

vikas966591 said:
*URGENT HELP REQUIRED*
Rooted a core, then UnRooted it for software update.super su was installed but disabled and device was shown unroot succesful by framaroot.device status was official.then, i downloaded the update. The phone restarted and now it gets stuck at samsung logo,it just glows indefinitely. When pressing vol down and menu/home key and starting it shows custom os, volume up to continue, volume down to cancel and restart phone. When pressing down.again it gets stuck at samsung logo and when pressing up says to not disconnect and shows update and odin. Recovery mode by pressing vol.up and menu is also working. I have no backup. Screenshots below.
*No backup made.
*Have another galaxy core.non rooted and working. Will making backup of it work on my phone. Both are Same model i8262(duos).
Click to expand...
Click to collapse
i think the fastest and easiest way to solve this is to flash stock rom using odin since you can get into dl mode.

mrlzikri said:
i think the fastest and easiest way to solve this is to flash stock rom using odin since you can get into dl mode.
Click to expand...
Click to collapse
The problem is i don't have my laptop with me. Is there any way to restore it via sdcard,or anything else,if not,will have to go to samsung service center,if it's the last choice.

Your idea of backing up on other core may be able to work, however, your bricked core needs to have cwm installed to restore the backup on which I am still not sure if it will work. The real quickest way to fix that is to flash the stock rom.
Sent from my GT-I8262 using xda app-developers app

It was under warranty and was showing official status. Gave it to samsung service centre. Thanks to all for their sincere help.

[Completed] CCE SK351 loop and don't open recovery mode

Hello guys! I have a CCE SK351 with a stock rom, I was on the browser today and suddenly the phone shows a message in other language that I can't understand, so I turn off the smartphone and turn on again, and nothing, stills on a loop showing the logo of motion plus, I tried to start the recovery mode (holding volume + and power) and only shows the Android with a enginner, don't show the menus as normally, I have the stock rom here, has any way to restore the rom by computer, some program? Thank you in advance.

XDA Visitor said:
Hello guys! I have a CCE SK351 with a stock rom, I was on the browser today and suddenly the phone shows a message in other language that I can't understand, so I turn off the smartphone and turn on again, and nothing, stills on a loop showing the logo of motion plus, I tried to start the recovery mode (holding volume + and power) and only shows the Android with a enginner, don't show the menus as normally, I have the stock rom here, has any way to restore the rom by computer, some program? Thank you in advance.
Click to expand...
Click to collapse
Hello there Welcome to XDA
I just found a single post with CCE SK351
Try registering an XDA account, and then post your question here:
Android Q&A, Help & Troubleshooting
You will have a better chance there... Good Luck!

[Completed] Why is my phone showing blank after factory reseting which is rooted to cyanogen 12.1

My mobile is Huawei Honor Holly(Hol-U19). I've rooted it with Kingsroot application. With the Clock Work recovery mode I've installed Cyanogen 12.1 in it. It was working well but the contacts did not sync to my phone which are in my gmail account. So, I thought to factory reset it and reset it. Now all the data including OS is gone. When I switch it on, it shows the Honor icon and after that every thing is blank. I tried starting the phone in recovery mode(pressing Volume up+down and power buttons). It's not showing anything. Please help me on this, it would help me a lot!!!
Thanks in advance!!

pranaydheeru said:
My mobile is Huawei Honor Holly(Hol-U19). I've rooted it with Kingsroot application. With the Clock Work recovery mode I've installed Cyanogen 12.1 in it. It was working well but the contacts did not sync to my phone which are in my gmail account. So, I thought to factory reset it and reset it. Now all the data including OS is gone. When I switch it on, it shows the Honor icon and after that every thing is blank. I tried starting the phone in recovery mode(pressing Volume up+down and power buttons). It's not showing anything. Please help me on this, it would help me a lot!!!
Thanks in advance!!
Click to expand...
Click to collapse
Hi,
Thank you for using XDA assist
there is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get the expert's help
Good luck.

tried to update my phone but its not booting

Hi guys,
I am new to XDA developers..
I am using unite 2. I have the same problem like apps installing automatically...
so i saw the forum in this site and decided to try.
before it in my phone notification bar my phone shows a new software update,
so i downloaded the update.
after phone restarted and its not booting..
when i entered recovery mode by power+volume up it shows no command.
guys please help how to get back my phone

sandeepvemula said:
Hi guys,
I am new to XDA developers..
I am using unite 2. I have the same problem like apps installing automatically...
so i saw the forum in this site and decided to try.
before it in my phone notification bar my phone shows a new software update,
so i downloaded the update.
after phone restarted and its not booting..
when i entered recovery mode by power+volume up it shows no command.
guys please help how to get back my phone
Click to expand...
Click to collapse
Disable "Software Update" application for automatic app installing problem.
While getting 'no command' message, try the hardware buttons like menu, home, or combination of volume buttons; this will show up the hidden recovery menu.
If your phone is bricked, i.e stuck at the very first micromax logo, flash firmware with sp flash tools. Here is a guide for it: https://www.youtube.com/watch?v=AoIg9-epPcM