So i have Samsung galaxy s3 LTE (4G) Running with stock and official stuff and such.
Model: GT-I9305
Android: 4.4.4
BuildID: I9305XXUFOA1
I have no experience about rooting whatsoever and decided to give it a go now.
So my question about the CF-file is: Does it matter if the file description shows different "build ID" than my phone does (my phone: I9305XXUFOA1 the file: KTU84P.I9305XXUFNL1)?
Everything else checks out fine (the android version and model)
Thanks!
XDA Visitor said:
So i have Samsung galaxy s3 LTE (4G) Running with stock and official stuff and such.
Model: GT-I9305
Android: 4.4.4
BuildID: I9305XXUFOA1
I have no experience about rooting whatsoever and decided to give it a go now.
So my question about the CF-file is: Does it matter if the file description shows different "build ID" than my phone does (my phone: I9305XXUFOA1 the file: KTU84P.I9305XXUFNL1)?
Everything else checks out fine (the android version and model)
Thanks!
Click to expand...
Click to collapse
Hi, thanks for using XDA assist! First, register an account, then ask your question here:
http://forum.xda-developers.com/galaxy-s3/help/help-thread-galaxy-s3-question-t2690307
Your device experts are there and they will help you with your needs.
Good luck!
Related
hello
i am from india, i bought samsung s2 sgh t989d unlocked with ics 4.0.4 firmware through online,i upgraded the firmware to jellybean 4.1.2 using odin. everything is fine but now my mobile is not at all getting signal.it is not even asking for any unlock code after rebooting the phone. there is no problem in the simcard. has my phone got locked again??what should i do to get my phone working again??i didnt do any backup before upgrading firmware.pls help me.
mosesroy said:
hello
i am from india, i bought samsung s2 sgh t989d unlocked with ics 4.0.4 firmware through online,i upgraded the firmware to jellybean 4.1.2 using odin. everything is fine but now my mobile is not at all getting signal.it is not even asking for any unlock code after rebooting the phone. there is no problem in the simcard. has my phone got locked again??what should i do to get my phone working again??i didnt do any backup before upgrading firmware.pls help me.
Click to expand...
Click to collapse
You can post your issue in the general S2 help thread.
It's created in the GT-I9100 forum, but help is provided for all S2 variants.
EDIT:
A friend of mine, @KJ, just wrote:
That's the Canadian version of the T-Mobile S2 t989...Hercules.
He'd be better served going to that forum I think. Its the same phone.
My guess is he probably would be better flashing the Telus firmware and checking APN settings. They're probably not there for telus, or wrong.
I can help him if he goes there....I have the t989d also.
So please check the device specific forum, as your issue may be a device specific one. And you could get better/quicker help there.
My tapatalk signature:
Phone: SGS5 (SM-G900F)
ROM: AllianceROM v4.1
Kernel: Stock G900FXXU1ANE2
Recovery: PhilZ-touch
If you have any question about or any issue with your SGS2, just ask in the New members friendly Q&A thread.
If you need general help/assistence, please go to XDA-Assist.
Background: Friend's Galaxy S6 ; SM-G920F ; Android 5.1.1 ; Bricked when failed to root
Hello, I am posting on behalf of a friend who bricked his phone. He accidentally flashed the 5.0.2 CF autoroot when his phone had updated to 5.1.1. Normally, this would be easy to fix by flashing its stock firmware.
However, we have no idea what the country of origin or carrier of the phone are. We only know the model number, SM-G920F, the IMEI, and serial number. I have tried using Samsung's new smart switch to detect the correct firmware, but it did not work. Unfortunately, my friend purchased his S6 from a not-so-trustworthy seller from Indonesia and has not been able to get a hold of them. We only have access to the sticker with its model, serial, and IMEI numbers on the phone's back. Any help or tips will be appreciated. We just want to unbrick his phone. Thanks in advance!
XDA Visitor said:
Background: Friend's Galaxy S6 ; SM-G920F ; Android 5.1.1 ; Bricked when failed to root
Hello, I am posting on behalf of a friend who bricked his phone. He accidentally flashed the 5.0.2 CF autoroot when his phone had updated to 5.1.1. Normally, this would be easy to fix by flashing its stock firmware.
However, we have no idea what the country of origin or carrier of the phone are. We only know the model number, SM-G920F, the IMEI, and serial number. I have tried using Samsung's new smart switch to detect the correct firmware, but it did not work. Unfortunately, my friend purchased his S6 from a not-so-trustworthy seller from Indonesia and has not been able to get a hold of them. We only have access to the sticker with its model, serial, and IMEI numbers on the phone's back. Any help or tips will be appreciated. We just want to unbrick his phone. Thanks in advance!
Click to expand...
Click to collapse
Hello there! Welcome to XDA!
First register an XDA account (so you can ask in the proper forum)
then, you may ask for help here: (see below)
Galaxy S6 Q&A, Help & Troubleshooting
Your device experts are located there....(You will have a much better chance of getting help there)
Also, here is the Main Galaxy S6 Area just in case:
http://forum.xda-developers.com/galaxy-s6
Always Remember to use the Search...
Thank you! Hope this help!
I know there is a lot of post about this issue, but I have not found something for my cellphone. Please help me!
I have tried two times to make root my phone, and the only thing that I reached was a soft brick two times. I do not want this happen anymore.
The specifications of my cellphone are:
Samsung S5
Model: SM-G900H
Android version: 4.4.2
Baseband version: G900HXXU0ANBI
Build number: KOT49H.G900HXXU1ANI2.
All post that I saw, not include this baseband and build number.
Please, just tell me what procedure I have to apply in my phone.
Lordraydem said:
I know there is a lot of post about this issue, but I have not found something for my cellphone. Please help me!
I have tried two times to make root my phone, and the only thing that I reached was a soft brick two times. I do not want this happen anymore.
The specifications of my cellphone are:
Samsung S5
Model: SM-G900H
Android version: 4.4.2
Baseband version: G900HXXU0ANBI
Build number: KOT49H.G900HXXU1ANI2.
All post that I saw, not include this baseband and build number.
Please, just tell me what procedure I have to apply in my phone.
Click to expand...
Click to collapse
Hi, thanks for using XDA Assist!
Here's a root method I found using the XDA search feature:
http://forum.xda-developers.com/galaxy-s5/general/g900h-t2827993
Good luck!
I have a Samsung Galaxy S3. The carrier is Virgin Mobile. They are on the Sprint Network. My model is the SPH-L710T. The build number is KOT49H.L710TVPUOAOF2. It's currently running Kit Kat 4.4.2.
I have seen/read a successful rooting protocol for the SPH-710 but none for my particular model.
If anyone can point me to a successful rooting protocol and ROM for my particular phone, I'd be most appreciative.
Thanks in advance.
EdmundPaul said:
I have a Samsung Galaxy S3. The carrier is Virgin Mobile. They are on the Sprint Network. My model is the SPH-L710T. The build number is KOT49H.L710TVPUOAOF2. It's currently running Kit Kat 4.4.2.
I have seen/read a successful rooting protocol for the SPH-710 but none for my particular model.
If anyone can point me to a successful rooting protocol and ROM for my particular phone, I'd be most appreciative.
Thanks in advance.
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
As you may have already found out, there is an XDA area dedicated to the Sprint Samsung Galaxy S II at http://forum.xda-developers.com/galaxy-s3-sprint but not everything there applies to the SPH-L710T. I suggest you post your question with all relevant details there where the experts familiar with your device might be best able to guide you. I also see a number of references to your model from a site search a thttp://forum.xda-developers.com/sitesearch.php?q=SPH-L710T which might be worth reviewing.
Good luck!
Hello all,
First time poster here so hoping to drop this off in the right place. I have a brand new (out of the box) Samsung Galaxy S4 which I just purchased from my Boostmobile dealer the other day. Installed the latest Cynogenmod on it only to find that LTE did not work. 3G works fine but this prompted me to look around for help. After discussing in #SGS4 on freenode, I wiped the phone and installed the latest Optimized cm 12.1 build. Again, same problem. LTE does not work and 3G does.
Model: SPH-L720
ROM: OptimizedCM-12.1-20150817
Carrier: Boost Mobile
Something tells me my problem relates to the carrier?
Hi, thank you for using XDA Assist. I'm assuming you didn't have this problem on stock? It could be adb issues with cm. But I'd ask your question here, http://forum.xda-developers.com/showthread.php?t=2374543. They are the experts on your device. You can also find your device's forum here, http://forum.xda-developers.com/showthread.php?t=2374543
Don't forget to register here to ask questions in the threads, http://forum.xda-developers.com/register.php