I'm proud owner of a Yuandao N101I which runs a Rockchip 3066 chipset. As the only firmware that supports my touchscreen is an official one, it sadly is lagging and freezing and so on, I'm trying to find a way to get the touchscreen to work with one of the custom roms of which some work like a charm - with an attached USB-mouse, as the touch screen remains unresponsive.
I figured out that the touch screen driver seems not to be included in the kernel but is somehow fiddled into the firmware.
Information about the touchscreen I could figure out via dmesg:
input: Goodix Capacitive TouchScreen as
/devices/virtual/input/input3
<<-GTP-INFO->> GTP Driver Version:V1.0<2012/05/01>
<<-GTP-INFO->> GTP chip version:GT81XNI_3R19_000
Unfortunately, I didn't manage to find hints about drivers for that specific touch screen in English, only in Chinese which I don't understand at all.
Can someone give me a hint where I might find someone who could tell me if this issue can somehow be solved and maybe some hints about how it can be solved?
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Related
hello
i install OMA jellybean rom on my device
from this thread :
http://forum.xda-developers.com/showthread.php?t=1903745&nocache=1
and the kernel i download it from here :
http://forum.xda-developers.com/showpost.php?p=32262300&postcount=25
when the device started the touch screen ( tactile ) does not work
so i decided to go back to the stock frimware which i downloaded it from the officel site :
http://www.easypix.eu/en/EasyPad-Download-Area
but the touch screen is not working
help please ?
P.S : the touch screen was working very well befor the install
Hi!
The best place to ask about that issue would be the Rom or kernel threads.... But you need to get 10 constructive posts under your belt first. Also, did you read through those 2 threads a bit? Chances are others have had the same issue... And a fix could have been discussed.
You can also ask for help here....
> General discussion > Questions and Answers
Good luck!
Hello.
I've been days trying to rotate my mk808b from landscape default to portrait.
The first things i did was change build.prop hwrotation and fakerotation, and that changed orientation only of bootscreen, not android launcher or apps. Also rotation apps, xposed modules like appsettings, didn't work.
Soo... i started looking at android.policy.jar - PhoneWindowManager.smali, and found some interesting functions that may be involved ( isDefaultOrientationForced ).
The bad thing is that i haven't enough smali knowledge.
¿ Could anybody point me to the correct solution ? :angel:
Hi there,
Give me more details about your device.
Thanks
R_a_z_v_a_n said:
Hi there,
Give me more details about your device.
Thanks
Click to expand...
Click to collapse
Here i attach 3 photos of the device. In other forum told me that is a strange clone.
I've the firmware but cannot post the link yet. Is called T005_T011_root_8723_20141029_V4.4.rar
I think i could also rotate this device with other rom like finless, but thats the unique that works.
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts.
> General discussion > Questions and Answers or > Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
My device is a Craig Electronics CMP 756 9" Tablet that was loaded with JellyBean 4.1 when I received it new in the box. I installed JB 4.2.2 with software provided by the Craig Electronics website. Install was flawless. I wanted to run 4.4 KitKat on this device so I installed the software for 4.4 KitKat from the Craig Electronics website. Installation went flawless as well. After performing the installation the touch screen does not operate correctly. I am unable to touch any app icon or anything on the touchscreen by placing my finger directly on the app icon. I have to touch at least 3/4" below the icon for the touch screen to recognize my input. I have been unable to locate a fix and have searched thread after thread and forum after forum with no luck. I want to revert back to JB 4.2.2 as it performed as designed with no issues. I have tried countless times without prevail. When I begin the install of JB 4.2.2 it starts normal. When the progress reaches 20-25% the screen flashes and the installation fails and status bar stops moving. Can anyone lead me to a thread, guide or any information on how to do this please?
Hi
Thanks for writing to us at XDA Assist. Unfortunately I can't find anything related to your tablet here on XDA. It might be worth your while having a look at the general Android Development and Hacking section, and the sub-forums within it. There's a general q&a section there where your question might be answered by someone with some knowledge of your device:
Android Q&A, Help & Troubleshooting
I'd also definitely be contacting the seller/manufacturer afoot your problem, they're the most likely people to have the resources to help you.
Good luck!
Thread closed.
Hello community!
Im searching Firmware for this model for like a week already and no luck, flashing everyday a few that look like simular and still no luck, also sent a request for the spanish company (UNUSUAL) to get the rom image from them and no response for now. Little bit info now:
UNUSUAL 9X
Allwinner A23
9"
Front camera 0.3mp
1024x600 pixels
8GB ROM
Home button and Sleep ONLY.
From Spain.
Front side of PCD:
INET-D90-REV01
Zeng-gc 2013-01-25
QL20 14, 13
Back side of PCB under pretection isolator:
QL-M E328832
iD90-C 8G 512/1
5101 20140328006
XKX 140403 0815
94V-0 - Temperature index resistance.
Screen:
GLP-YH0901F
1024x600
I was unnable to upload images here so I used Dropbox to host pictures:
h tt ps://w w w .dropbox. com/sh/stt12g5in9swna8/AACoC5F2NEkrB6x16coNjRX6a?dl=0
Hi there,
I'm sorry but I can't find anything related to your question/device ... really UNUSUAL device name.
Please post that in the forum bellow for more answers from the experts but first register an account on XDA.
> General discussion > Questions and Answers or > Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Hi,
I have purchased the Mijue P7000 plus (I dont know if im allowed can provide links). I have successfully rooted/flashed etc android phones over the past few years but all are "popular phones" with phone specific threads.
It is mtk 6752. Ive browsed a bit and all i can make out so far is, download application thats compatible with mtk 6752, make sure you write down imei, and follow the rooting instructions. Is there any thing i should be wary of? Anyone any experience of this phone or similar? im aware of more than one rooting software. The best rated one is on other computer and cant remember name - It was recently updated to add 6752 to its list.
As for ROM, i dont expect to ever find a custom rom for it (its currently 5.0), i just intend to make manual changes to settings. Ive still to browse for this.
Thanks for reading, hope you have some advice so i dont have a brick
Thanks
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck