I'm trying to factory reset my Tab 2 because it keeps on restarting. It will load up all the apps but after 30 sec or so it freeze and reboot. This cycle goes on endlessly. Anyway so I want to factory reset. I go into the recovery mode and I see "command error" with the Android guy flat on his back with red exclamation sign. I cannot clear cache or factory reset or anything. I can select options and execute them but it gives error.
Now I thought might as well root or install custom recovery through Odin. Odin say Pass and the flash is all fine but its no sticking. I still don't have root or custom recovery although Odin say it went all good. Any ideas ? Also has anyone have firmware for this model in .tar so i can flash through Odin and see if it sticks. Hardware problem here I think.
even stock firmware not sticking. I can;t seem to write to nand. What if i check erase nand on odoin when flashing stock rom ?
Related
I was rooted with CWM recovery. I odin flashed stock with root injected and then flashed via odin stock kernel and recovery. At this time I was able to pull the update and the device restarted to install. Upon 100% completion the device rebooted as I woudl expect but upon reboot it goes right back into the install, hits 100% and does the same thing. It appears Im stuck in a update boot loop. Has anyone else experienced this?
I did a odin restore with Stock 8013.tar with root injected but upon reboot once odin completes it goes right back into this update loop. Someone please help!!!!
ej_424 said:
I was rooted with CWM recovery. I odin flashed stock with root injected and then flashed via odin stock kernel and recovery. At this time I was able to pull the update and the device restarted to install. Upon 100% completion the device rebooted as I woudl expect but upon reboot it goes right back into the install, hits 100% and does the same thing. It appears Im stuck in a update boot loop. Has anyone else experienced this?
I did a odin restore with Stock 8013.tar with root injected but upon reboot once odin completes it goes right back into this update loop. Someone please help!!!!
Click to expand...
Click to collapse
Just flashed stock kernel and recovery via odin and same thing happens. Just after samsung logo on splash screen it goes into the android character with a percentage for an update being applied. It hits 100% and sits there for a couple minutes, reboots and does the same thing all over.
I"m desperate and need this to get fixed!!
ej_424 said:
Just flashed stock kernel and recovery via odin and same thing happens. Just after samsung logo on splash screen it goes into the android character with a percentage for an update being applied. It hits 100% and sits there for a couple minutes, reboots and does the same thing all over.
I"m desperate and need this to get fixed!!
Click to expand...
Click to collapse
I flashed the stock n8000 recovery file via odin and it booted me out of the update loop. I had to do it twice tho. I rooted via odin so our fixes may be different.
I used file posted here http://forum.xda-developers.com/showthread.php?p=30450339#post30450339 post 45
Hope this helps a little
ej_424 said:
I was rooted with CWM recovery. I odin flashed stock with root injected and then flashed via odin stock kernel and recovery. At this time I was able to pull the update and the device restarted to install. Upon 100% completion the device rebooted as I woudl expect but upon reboot it goes right back into the install, hits 100% and does the same thing. It appears Im stuck in a update boot loop. Has anyone else experienced this?
I did a odin restore with Stock 8013.tar with root injected but upon reboot once odin completes it goes right back into this update loop. Someone please help!!!!
Click to expand...
Click to collapse
ej_424 said:
Just flashed stock kernel and recovery via odin and same thing happens. Just after samsung logo on splash screen it goes into the android character with a percentage for an update being applied. It hits 100% and sits there for a couple minutes, reboots and does the same thing all over.
I"m desperate and need this to get fixed!!
Click to expand...
Click to collapse
Ok I'm backup and running. I had to flash "HighonAndroidCWMRecovery" via odin to get past the update loop. Any ideas why this woudl be? I'm running stock with root and custom recovery. If I flash stock recvoery again and attempt the update do you think the same thing will occur?
ej_424 said:
Ok I'm backup and running. I had to flash "HighonAndroidCWMRecovery" via odin to get past the update loop. Any ideas why this woudl be? I'm running stock with root and custom recovery. If I flash stock recvoery again and attempt the update do you think the same thing will occur?
Click to expand...
Click to collapse
This need not be so complicated follow directions here http://forum.xda-developers.com/showthread.php?t=1847054&page=6 see post 58 and 39
Stuck, can't restore factory settings
I tried to unroot my Galaxy note 10.1 wi-fi and have caused such damage that it won't boot up. I have tried to press the power and down volume and I either get the Black welcome screen stuck, requesting I download the md5 file (which I have tried and doesn't work) or asks to use Kies to boot, but my laptops won't even pick up the device, they recognizes that there is a new device connected but it can't read it!
In the top left hand corner it reads
ODIN MODE (in red letters)
Product name: GT-N8010
Customer binary: yes (20 counts)
Current Binary: Custom
System status: Custom
PLEASE HELP!!!!
Thanks in advance
bee_rob said:
I tried to unroot my Galaxy note 10.1 wi-fi and have caused such damage that it won't boot up. I have tried to press the power and down volume and I either get the Black welcome screen stuck, requesting I download the md5 file (which I have tried and doesn't work) or asks to use Kies to boot, but my laptops won't even pick up the device, they recognizes that there is a new device connected but it can't read it!
In the top left hand corner it reads
ODIN MODE (in red letters)
Product name: GT-N8010
Customer binary: yes (20 counts)
Current Binary: Custom
System status: Custom
PLEASE HELP!!!!
Thanks in advance
Click to expand...
Click to collapse
I have same Problem
My only response would be to go to sammobile and download as close to shipped rom as you can (must be for your region and carrier, if from carrier), updated rom is fine. Make sure the download ISN'T corrupted by doing an MD5 check.. Also before f;lashing, make sure you exit KIES as this can screw up the connection in ODIN.
Put in Download mode, hold down volume and power until it says a scary warning, ignore the warning and press up volume.
Flash with ODIN making sure re-partition ISN'T ticked, when it finishes flashing turn off power.
Go to recovery by holding up volume and power button until it goes into recovery.
Wipe data/cache and then wipe dalvik cache.
Reboot and see what happens.
Good luck.
ultramag69 said:
My only response would be to go to sammobile and download as close to shipped rom as you can (must be for your region and carrier, if from carrier), updated rom is fine. Make sure the download ISN'T corrupted by doing an MD5 check.. Also before f;lashing, make sure you exit KIES as this can screw up the connection in ODIN.
Put in Download mode, hold down volume and power until it says a scary warning, ignore the warning and press up volume.
Flash with ODIN making sure re-partition ISN'T ticked, when it finishes flashing turn off power.
Go to recovery by holding up volume and power button until it goes into recovery.
Wipe data/cache and then wipe dalvik cache.
Reboot and see what happens.
Good luck.
Click to expand...
Click to collapse
Not working, not go the Recovery Mode, Only Samsung Logo.
I'm having similar issue as Odin keeps failing when trying to flash ROM.
Does anyone know the commands to do it through ADB? I've done it before on my nexus7 but don't know the commands to exactly use for the note. I still can't get into recovery. Only can get into that ODIN mode. I have all drivers and Android ADB installed on PC.
It seems like nothing will write to the NAND. Although my flash count changes now showing my attempts. I might have no choice but to call Samsung and file a warranty claim. I just don't want to lose all the pictures and info that's in my tablet.
Well I got my tablet back yesterday from Samsung. They fixed it. The report showed they replaced some piece that burned out. I forgot the name of it. Unfortunately all my info and stuff was erased. So I had to reinstall everything manually. At least my tablet working like new again. So glad to have it back. Been like a month or so since I've been able to use it. My nexus 7 and galaxy s3 was holding me down in the meanwhile.
This note is a great device. IM seeing again why I've missed it so much. Works flawlessly on stock Tom.
I have Samsung galaxy note 10.1 GT-N8010 UK model. so after 6 months i rooted it through odin and used to install some rooted apps. from playstore i installed an app and after that the tablet suddenly restarted and stucked on the logo "Samsung Galaxy Note 10.1" after that i restarted it in odin mode but nothing happens. some time recovery mode for wiping data but nothing happened. NOte: clockworkmod recovery mode doesnt opens just simple recovery mode. and now that also recovery mode also not opening just odin mode. So please guyz tell me have i bricked my device or its hardware isssue or software or it can be repaired please please help me.
od:n node is a good sign. just-find a stock image and flash with odin.
Thanks: BUt
thanks alot. please tell me that is unrooting method?
No, thats not the unrooting method.
Best idea is to flash a stock rom, re-root, then run triangle away to reset flash counter and status's. Then use Mobile ODIN pro to flash a stock rom, make sure if you want to go stock that you untick the everroot options and re-install mobile ODIN options, then also tick wipe cache\data and wipe dalvik cache. This will wipe EVERYTHING off your internal memory so make sure you have backed up everything that you want to keep.
You now have a factory reset stock phone. No flash count, ALL status's back to "Official".
done
i have done the first method flashed 4.1.2 through odin and thanks alot it worked. now i want to install AOKP i like it so for this is should reroot my phone and flash it through odin and cwm not working on my tablet. thanks to all of you
ultramag69 said:
No, thats not the unrooting method.
Best idea is to flash a stock rom, re-root, then run triangle away to reset flash counter and status's. Then use Mobile ODIN pro to flash a stock rom, make sure if you want to go stock that you untick the everroot options and re-install mobile ODIN options, then also tick wipe cache\data and wipe dalvik cache. This will wipe EVERYTHING off your internal memory so make sure you have backed up everything that you want to keep.
You now have a factory reset stock phone. No flash count, ALL status's back to "Official".
Click to expand...
Click to collapse
please guy help me out.... when i flash stock recovery through odin so the odin suddenly give messeage not responding after that in message box there is written end... so please how could i reset my device
Stock recovery ????
Flash stock rom via Odin gives you stock recovery .
jje
Mansoor1223 said:
please guy help me out.... when i flash stock recovery through odin so the odin suddenly give messeage not responding after that in message box there is written end... so please how could i reset my device
Click to expand...
Click to collapse
if its the stock rom you open in odin it will generally stop responding, just let it be and in a few minutes it will be ok then you can flash. its just checking the file
Mansoor1223 said:
please guy help me out.... when i flash stock recovery through odin so the odin suddenly give messeage not responding after that in message box there is written end... so please how could i reset my device
Click to expand...
Click to collapse
If you're using PC odin you need to go to download mode 1st - from power off hold down lower volume and power button until the "warning" comes on the screen. press up volume and you get to download mode.
Connect the tab to the PC with USB and run ODIN. It will light up one of the com ports with "Com 0" Or something displayed. Make sure you DON'tT have Kies active or it won't work. It must be exited from or uninstalled. Also don't have another samsung phone/tab attached or it will pick this up too...
Shouldn't do anything but if it does detect, it is a shock when "FAIL" shows up, especially if you're not sure already... You might do something stupid like disconnect the tab in the middle of a flash...
I had CM10.1-3 stable installed, and everything was perfect, then I turned on the native encryption, the tablet started to acted slow but working, one day I woke up and find the tablet will not turn on so here is what I have done
Restarted the tablet, entered the decryption password and still hanged
Restarted the tablet again and then it boot loops on Samsung galax tab 2 10.1 screen
Restarted again and it will not boot at all
No recovery
I can access download mode
So I did try to reflash CWM 6.0.2 again with heimdall and it failed
All I got was "Firmware error occurred while updating please use kies the phone ! computer screen"
No other mode is working
Got Stock rom 4.2.2 tired with odin finishes but still reboot is black screen
Got esspreso_16G PIT file repartitioned and reinstalled the stock rom still no booting
Using heimdall repartitioned with resspreso PIT file from 201202 and I got DOWNLOAD MODE AGAIN !
Try to install orignal rom or CWM brick again
Using heimdall repartitioned and installed stock kernel only and x-loder
So currently it is charging and have DOWNLOAD MODE stating count of customes and kernel of SMASUNG_OFFICAL
My question is, is this software brick or hardware ? and how I can get the tablet up and running again using ODIN or Heimdall ?
Thank You
d
I am not sure, but what i would try:
Try Odin, flash Stockrom - uncheck "Auto-Reboot" !
When Odin finished directly boot into recovery from downloadmode.
Make a factory reset if recovery booted.
Reboot device.
Android-Andi said:
I am not sure, but what i would try:
Try Odin, flash Stockrom - uncheck "Auto-Reboot" !
When Odin finished directly boot into recovery from downloadmode.
Make a factory reset if recovery booted.
Reboot device.
Click to expand...
Click to collapse
Did try that, Odin 3.07 or something keeps flushing everything but the download mode on the tablet froze on 25% of the blue bar. then I get again error will firmware update, so I add again to heimdall and repartitioned and tried to flash the rom part by part starting with MLO as X-Loader and it told me successful with no reboot, tried to flash factorysysfs also stuck at 28% with heimdall, had to do reboot of the device, now the device is just blank black, no download mode, or the emergency firmware update via kies screen "phone ! computer" no idea what should I do :s it seems dead.
Why are you flashing pit-files all the time????? these files can difenitly dangerous and can kill your tab with a breeze if not used with care ....
you can´t do nothing with odin or heimdall if you don´t have downloadmode or "Black screen of death" ("Firmware error occurred while updating (...)")...
good luck
Android-Andi said:
Why are you flashing pit-files all the time????? these files can difenitly dangerous and can kill your tab with a breeze if not used with care ....
you can´t do nothing with odin or heimdall if you don´t have downloadmode or "Black screen of death" ("Firmware error occurred while updating (...)")...
good luck
Click to expand...
Click to collapse
It was the only way to get back to DownloadMode is by flashing PIT file, however I managed to flash orginal Kenerl back at that time and I did manage to flash X-Loder seems that what bricked the tablet, Now when I am connected to the PC I can see OMAP4430 driver, Some saying I need to use JTAG "RIFF BOX" or maybe OMAPFlasher but I am not sure if this the correct step or not, what really bothers me that when I had DownloadMode odin will not finish more than 28% of the rom. what do you think should I use OMAPFlasher ? and if there any guide to do so ? I just need the tablet to have bootloader and Kernel so I can flash back with Odin.
D
I have a huge problem!
I flashed the twrp (http://forum.xda-developers.com/galaxy-s6/development/rom-aterminatorg920f3zpa1m-6-0-11-0b-t3295183 ) via odin ,as said, and then the phone stayed in download mode instead of rebooting or saying something like "finish" (in odin i got a message that the process successed) only the writing "dont turn the phone off". it stay like this for a long time so i had turn the phone off and since then the phone doesnt go past the samsung s6 logo screen and can be booted into recovery mode in any way!!
Ive tried reflashing twrp (many versions) and to use every other combination to get into Recovery mode (so i could do a factory reset or a data wipe) but it doesnt work.
I had this issue. It was because I was running the latest 5.1.1 update and couldn't flash TWRP. My solution was to use odin to flash stock recovery.
Hope that helps
where cani find stock recovery?
downloaded twrp 3, was running 5.1.1 on my phone and rooted it. tried to flash a rom and got stuck in a bootloop, now I cant boot into twrp, or anything for that matter. All i can do is hold volume down and power and home and try to ODIN a new bootloader or such and it just fails. what do i do? but when I try to boot into TWRP it goes into a blueish screen with a White exclamation mark saying "An error has occurred while updating the device software. Use the Emergency recovery function in the smart switch PC software. I tried to do that but it didnt even recognize the device. At this point i dont care about the data, I just need a working device
Okay, so I attempted to unroot and flash the stock 5.0.2 software and I got a error on the download screen. It says SW REV. CHECK FAIL. DEVICE: 3. BINARY: 1.
If you have no knox install MM official then flash this kernel tar file (AP) https://drive.google.com/folderview?id=0B40ItdHKfkyQcTA5bnRPWDg0X28&usp=drive_web#list it will boot to mm 5min :good:
Btw you cann downgrade from 5.1.1 to 5.0.1 you just go up not down
zach616 said:
downloaded twrp 3, was running 5.1.1 on my phone and rooted it. tried to flash a rom and got stuck in a bootloop, now I cant boot into twrp, or anything for that matter. All i can do is hold volume down and power and home and try to ODIN a new bootloader or such and it just fails. what do i do? but when I try to boot into TWRP it goes into a blueish screen with a White exclamation mark saying "An error has occurred while updating the device software. Use the Emergency recovery function in the smart switch PC software. I tried to do that but it didnt even recognize the device. At this point i dont care about the data, I just need a working device
Click to expand...
Click to collapse
Happened to me a lot of times in the past few days trying to get MM, for some weird reason flashing Unikernel always works for me (takes me to recovery screen after, then i select 'reboot now'), and all my data, apps etc are still there
emcardle660 said:
Happened to me a lot of times in the past few days trying to get MM, for some weird reason flashing Unikernel always works for me (takes me to recovery screen after, then i select 'reboot now'), and all my data, apps etc are still there
Click to expand...
Click to collapse
will try and update. thank you. didnt work.
Okay guys so now I need a ROM to flash using ODIN. I tried to download from sammobile but the speeds are too damn slow. What I tried to flash was this file " G920TUVU1AOCG_G920TTMB1AOCG_G920TUVU1AOCG_HOME.tar.md5 " and i got the error 3 to 1.
Download Samfirm from here, XDA itself.
Run samfirm, enter model as G920F and your region code.
It will download from Samsung servers, so high speed.
Now flash using Odin the downloaded file by putting the phone in download mode, (vol down+home+power on).
How did it happen?
Did you try to flash the VOD 6.0.1 and got stuck towards the end at hidden.IMG failing the process?
If yes, then its a two minute job. Just open the 6.0.1 tar archive and look for hidden.IMG extract it anywhere and rename it from "hidden.img" to "hidden.img.tar".
Note flash this hidden.img.tar as AP in download mode, your phone should boot.