I get this error when i try to connect my tab to adb ..do you guys have any ideas what i can do to make it to work?
I mention that i have the drivers(from Kies),usb debugging is enabled and adb works on my phone.
I believe you need the android usb drivers supplied by google to get it to connect. They can be downloaded using the sdk package manager. Also I'm not sure it will work having the Samsung drivers installed and you may have to uninstall them first.
they are installed already since i installed the whole sdk manager pack
tzacapaca said:
they are installed already since i installed the whole sdk manager pack
Click to expand...
Click to collapse
install kies from Samsungs website
Sent from my myTouch 4g via Tapatalk
ringnutz said:
install kies from Samsungs website
Sent from my myTouch 4g via Tapatalk
Click to expand...
Click to collapse
thx for answer but I already done that..any other suggestions?
tzacapaca said:
they are installed already since i installed the whole sdk manager pack
Click to expand...
Click to collapse
What drivers are showing up when you plug in the device? If it says Samsung then you don't have the android drivers installed. And I believe you can't have both installed only one or the other as only one will load when you plug in the device not both.
I have the Samsung Android ADB Interface driver(although is not showing when i plug in the device) and the drivers which came with sdk manager
tzacapaca said:
I have the Samsung Android ADB Interface driver(although is not showing when i plug in the device) and the drivers which came with sdk manager
Click to expand...
Click to collapse
When you plug the device in, under Device Manager in Windows, there should be listed Android Composite ADB Interface under the device. If not the Google USB drivers were not installed properly.
yeah I dont think my theme is the culprit, there are many reasons why ADB wouldnt show devices. Also Heimdall>Zadig is good for drivers.
run sdk manager and install latest google drivers as well.
are you on Windows OS?
nope,not your theme its the culprit..cuz i didnt install it and i cant install it cuz of no adb connection which is required by a tool named AutoDEOTool1.0.3
I installed latest google driver via sdk manager too..
yes,on Win 7 64 bits
*pulling hair*
I didn't have my usb cable yesterday to check it out but adb actually works with the Samsung drivers. Device Manager>Android Phone>SAMSUNG Android ADB Interface. And when I type the command "adb devices" it shows up. This works both if you plug the tablet in wihtout powering it up and when its turned on so I'm not sure what your problem is. I do have Kies installed on the laptop too so yours should be working if you installed the sdk and drivers correctly.
Which Tab do you have? I have the 6210 unlocked wifi only, it could be other models work differently. Not sure if you have a locked bootloader that you can access the tab through adb.
GT P6200 European
and here is what i get on cmd
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Tavi>adb devices
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
C:\Users\Tavi>adb devices
List of devices attached
C:\Users\Tavi>
EDIT:SOLVED!
Thank you all for answers
How did you solve this?
I input in cmd adb fastboot reboot and suddenly the device got the command and then recognized my tab..(pretty strange i know)
make it done
tzacapaca said:
I get this error when i try to connect my tab to adb ..do you guys have any ideas what i can do to make it to work?
I mention that i have the drivers(from Kies),usb debugging is enabled and adb works on my phone.
Click to expand...
Click to collapse
do this steps:
1) remove battery
2)insert battery
3) connect the phone via usb will turned off and leave it till usb android phone installed
4) turn ur android phone on
5) wait for full boot
6) install Motorola usb driver .zip attached down there
7)select charge only mode
8) then write the commands of tacoroot.bin
9) when all is done hit the thanx button
ADB wireless
I was having the same problem, I tried to install driver, KIES, everything, tried to uninstall then reinstall in control panel, etc... to no avail.
Then I tried adb wireless... and it works. give it a try.
Unitedforlife said:
I was having the same problem, I tried to install driver, KIES, everything, tried to uninstall then reinstall in control panel, etc... to no avail.
Then I tried adb wireless... and it works. give it a try.
Click to expand...
Click to collapse
What do u mean adb wireless?
ADB, but not Fastboot, can see my phone. I have followed the same steps as with Windows 7, yet I can't get fastboot to see my device on this new machine. I see threads for other phones, but didn't see one for this for our phone. I need to reflash my recovery because this new CWN can't mount the sd card and I need to reflash root and busybox after OTA update (ota survival failed)
zomgitsanoob said:
ADB, but not Fastboot, can see my phone. I have followed the same steps as with Windows 7, yet I can't get fastboot to see my device on this new machine. I see threads for other phones, but didn't see one for this for our phone. I need to reflash my recovery because this new CWN can't mount the sd card and I need to reflash root and busybox after OTA update (ota survival failed)
Click to expand...
Click to collapse
OTA survival failed?
Did you pay for superSU pro?
It's worked for me since ICS
And about the fastboot on Windows 8.1......Good luck
EDIT#
annoyingduck said:
After the upgrade, all drivers are wiped. Hooking up N7 to cpu triggers an auto setup that does not work correctly. In device manager what shows is and android device with an adb composite interface driver, but no actual N7...its hidden. This is how I got it to work:
I had already reinstalled SDK/platform tools/etc (if you haven't done this, just download the google drivers themselves from google). Connect device with debugging enabled and allow the auto setup. Turn off debugging, and again allow the auto set up. On my computer, both with debugging on/off the N7 did not show up in the devices list. While debugging is off, open the control panel, go to hardware+sound/view devices. Here the N7 will show. Right click it/properties/hardware/click the driver/properties/change settings/driver/change settings/update driver/manually search/choose MTP. Reboot, enable debugging/hook up/right click start/device manager/android/android adb composite driver/right click/update driver/manual search/type in path to the google drivers/install.
After that your N7 will read in the device list as an N7, files will show in the file manager (MTP), and ADB will work....
Click to expand...
Click to collapse
TRY THIS
Windows has determined the driver software for your device is up to date.
I worked just fine on a Windows 7 machine
One more reason 8 is a POS
OTA survival was a partial success. Some apps can still get root, apparently, but others fail and
This device cannot start. (Code 10)
A request for the USB BOS descriptor failed. (when in fastboot)
I have read many guides about setting up and using ADB, I am using an older computer with windows xp sp3. I just got my first nexus device which is a nexus 5, in device manager the phone shows up as " samsung android phone" and then "google nexus adb interface". I have tried uninstalling and then reinstalling the drivers using many different ones found on xda. I have the android sdk installed and adb seems to be working, at least when I type in "adb version" the version number comes up, but when I type "adb devices" nothing comes up as attached devices. This is really frustrating me, as I have have been trying to get this working for days now.i have already uninstalled every other android related driver using USBDeview. If anyone could please help me with this I would greatly appreciate it. I'm almost to the point go giving up! Could the problem be because I rooted the phone before getting all this setup? I ask this because when I try to update the driver in device manager it always shows driver type as clockwork mod no matter what driver I try to use
Did you enable ADB via Dev Options on the phone?
theesotericone said:
Did you enable ADB via Dev Options on the phone?
Click to expand...
Click to collapse
Do you mean USB debugging, yes I have that enabled
Go to device manager select your phone (samsung device or whatever it's showing!!) and right click and select "Update Driver Software".
On the next screen, select "Browse my computer for driver software" and set the path to : C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver"
I have used C:\Program Files (x86) because that's the place in which I have installed the SDK. Put a tick mark on "Include subfolders" and then hit Next...
Your device drivers will be installed again and adb will be working!
PS: Please make sure you have the latest android sdk and usb_driver downloaded from SDK manager!!
I have installed adb drivers. But when I enter the command "adb devices", my phone doesn't get detected. I have Xperia ZL and adb detects it and not my OnePlus One. Yes, I have enabled Android Debugging in developer options. Tried updating driver software too. It says "windows couldn't find driver software for your device". I use windows 7.
EDIT: Solved. Installed drivers from here
anagramgenius said:
I have installed adb drivers. But when I enter the command "adb devices", my phone doesn't get detected. I have Xperia ZL and adb detects it and not my OnePlus One. Yes, I have enabled Android Debugging in developer options. Tried updating driver software too. It says "windows couldn't find driver software for your device". I use windows 7.
Click to expand...
Click to collapse
This problem is solved here is the link.
http://forum.xda-developers.com/showthread.php?t=2782721
If I helped you. Please click thanks
Sent from my YU Yureka using XDA Free mobile app
I am trying to install Marshmellow on my Nexus5, which currently has developer preview 3 on it.
I am following the process mentioned here: https://www.androidpit.com/how-to-get-android-m-preview
I have installed SDK tools but when I connect my Nexus5 to the computer then it is not showing up in the device manager.
USB debugging has been enabled as well. Can anyone please help me out here?
Thank you in advance
What drivers are you using? Try with different driver.