Hello,
Is Scatter file for all phones having mt6752 same? I mean, if I download a scatter file for mt6752, Can I use it for my two phones i.e JiaYu S3 and Lenovo P70 (Both using mt6752)?
sherazi21st said:
Is Scatter file for all phones having mt6752 same? I mean, if I download a scatter file for mt6752, Can I use it for my two phones i.e JiaYu S3 and Lenovo P70 (Both using mt6752)?
Click to expand...
Click to collapse
No, not at all!
Even phones with same chipsets have different mount points for most of the partitions, so you must never use other phone's scatter file to avoid bricking.
GokulNC said:
No, not at all!
Even phones with same chipsets have different mount points for most of the partitions, so you must never use other phone's scatter file to avoid bricking.
Click to expand...
Click to collapse
OK thanks
Related
Hello, I Formatted NVRAM using SP Flash Tool by mistake. Now I have only NVRAM folder. Is there any way to generate nvram.bin file and then flash with SP Flash Tool? Soo I lost my radio signal, wifi and bloototh address but when I copy my nvram folder in my phone than everything is ok but if I restart then my phone get information from nvram bin region.. :S
I have Alcatel OneTouch Idol 6030X.
Hi I am facing the same problem but in a different phone
D0C1 said:
Hello, I Formatted NVRAM using SP Flash Tool by mistake. Now I have only NVRAM folder. Is there any way to generate nvram.bin file and then flash with SP Flash Tool? Soo I lost my radio signal, wifi and bloototh address but when I copy my nvram folder in my phone than everything is ok but if I restart then my phone get information from nvram bin region.. :S
I have Alcatel OneTouch Idol 6030X.
Click to expand...
Click to collapse
Hi
Did you find the solution to this problem? I am facing the same problem in my S4 clone MT6575. If you find the answer pls do let me also know.
[email protected]
Thanks
raman_ said:
Hi I am facing the same problem but in a different phone
Hi
Did you find the solution to this problem? I am facing the same problem in my S4 clone MT6575. If you find the answer pls do let me also know.
[email protected]
Thanks
Click to expand...
Click to collapse
i TOO HAD SAME PROBLEM in my Lenovo fhb tab 8, I rooted the phone and installed X-plore apk copied the files frim root folder. Then wrote the imei throrugh the MauiMETA . you can also try this method.
Hello,
I am trying to create backup of my Lenovo P70 using MtkDroidTools. I cannot create scatter file because when I click Block Map, "Create Scatter File" is grayed out. Please help me as I'm in urgent need of it.
Best Regards
sherazi21st said:
I am trying to create backup of my Lenovo P70 using MtkDroidTools. I cannot create scatter file because when I click Block Map, "Create Scatter File" is grayed out.
Click to expand...
Click to collapse
Do you see all the partitions listed (like recovery, boot, system) after clicking 'Block Map'?
If no, then it means phone is not connected properly.
Sometimes, you have to install drivers like Android CDC Gadget driver, Android VCOM drivers for it to work
GokulNC said:
Do you see all the partitions listed (like recovery, boot, system) after clicking 'Block Map'?
If no, then it means phone is not connected properly.
Sometimes, you have to install drivers like Android CDC Gadget driver, Android VCOM drivers for it to work
Click to expand...
Click to collapse
I See all partitions but their mount point is not there plus create scatter file is grayed out.
sherazi21st said:
I See all partitions but their mount point is not there plus create scatter file is grayed out.
Click to expand...
Click to collapse
Hi,
Same problem with another MT6753 device. Please, can you help for create the scatter file?
sherazi21st said:
I See all partitions but their mount point is not there plus create scatter file is grayed out.
Click to expand...
Click to collapse
manos78 said:
Same problem with another MT6753 device. Please, can you help for create the scatter file?
Click to expand...
Click to collapse
These MTK chips have 64-bit processors..
As of now, the MTK Droid Tools software isn't updated to support these new 64 bit chipsets.
You can try to manually create a scatter file, or check the phone manufacturer's website for complete firmware with a specific tool or XDA Firmware. (That might include a scatter file; IDK)
If you don't find any, better wait till a proper tutorial / update comes.
I think there'll be some solution to this in the Chinese forums..
The Chinese Smart phone companies are highly dependent on the cheap Mediatek chipsets..
So, you can try looking there if you have patience and use Google Translate with Chrome.
manos78 said:
Hi,
Same problem with another MT6753 device. Please, can you help for create the scatter file?
Click to expand...
Click to collapse
Which phone are you using? I've scatter of my phone and I'm able to flash using sp flash tools. If you're using a Lenovo phone then you'll find scatter and flash tool which will do your job.
sherazi21st said:
Which phone are you using? I've scatter of my phone and I'm able to flash using sp flash tools. If you're using a Lenovo phone then you'll find scatter and flash tool which will do your job.
Click to expand...
Click to collapse
Wiko Fever, see: http://forum.xda-developers.com/android/development/root-wiko-fever-t3242640/
GokulNC said:
These MTK chips have 64-bit processors..
As of now, the MTK Droid Tools software isn't updated to support these new 64 bit chipsets.
You can try to manually create a scatter file, or check the phone manufacturer's website for complete firmware with a specific tool
If you don't find any, better wait till a proper tutorial / update comes.
Click to expand...
Click to collapse
I'm doing the initial research/development. No firmware from manufacturer at time. I'm doing all with one unit of the device. I'm creating the scatter file manually using a ROM dump. My problem at time is that my dump isn't a full 16GB dump, only 1.5GB. :crying:
manos78 said:
Wiko Fever, see: http://forum.xda-developers.com/android/development/root-wiko-fever-t3242640/
Click to expand...
Click to collapse
Sorry, don't know about this phone. I've Lenovo and there's a Russian forum which covers almost all Lenovo phones.
Hi,
In the e3 recovery menu is an option for show the bootlog, inside it you can show the PARTION mapping of the device... with all info: partition name, start address, size... you can create the scatter file by hand with this info.
Hi,
I need to edit the serial number of my Lenovo Tab3 7 LTE with an MT8735P processor. I have checked few approachs including the one using SP META Tool, which needs an APDB file to work with. But in my firmware it looks like there is no such file.
Can someone help me to find it, or in case there is really no such file, suggest another approach for this to accomplish?
Thanks a lot in advance.
I want to make a full copy of a MTK6580 smartwatch firmware before make changes on it, but MTK droid tools I used before with other MTK devices can´t detect this... please, I need a starting point on how to do it with this device...
Thanks
A starting point:
SP FlashTool, a scatter file of similar device and cat /proc/parti*
Then change the starting addresses and sizes to match yours.
CXZa said:
A starting point:
SP FlashTool, a scatter file of similar device and cat /proc/parti*
Then change the starting addresses and sizes to match yours.
Click to expand...
Click to collapse
THANKS. I am not sure if I can access to /proc/ folder, from the device or the PC, or if partitions will list all addresses, but I wil try. I have scatter (and firmware ) of the same device (other brand, but same hardware) but I don´t know if same hardware with different firmware could have different partition addresses., so I didn´t use it to save my actual firm.
Thanks again this is a good starting point. :good::good:
Worked, I´ve got the /proc/par* addresses. I will try to do the backup now. THANKS
How can I want to make a recovery.img
From the recovery-from-boot.p and a .sh file it has inside the update.zip.
Is there any method to do it without flashing the update.zip?
hon_de said:
How can I want to make a recovery.img
From the recovery-from-boot.p and a .sh file it has inside the update.zip.
Is there any method to do it without flashing the update.zip?
Click to expand...
Click to collapse
That depends on the phone. What is the make, model and version of Android?
Usually the recovery-from-boot.p file is in \system\system.
This file will not help you make a recovery.img.
DragonPitbull said:
That depends on the phone. What is the make, model and version of Android?
Usually the recovery-from-boot.p file is in \system\system.
This file will not help you make a recovery.img.
Click to expand...
Click to collapse
The model is: Panasonic KX-PRXA15
Here is the Panasonic page with all the specs:
KX-PRX150 Cordless - Panasonic Middle East
Explore the Panasonic KX-PRX150 - Cordless - with Touchscreen and Answering System
www.panasonic.com
If it's helpful for you I can send you the whole rom or the recovery-from-boot.p and the .sh file.
hon_de said:
The model is: Panasonic KX-PRXA15
Here is the Panasonic page with all the specs:
KX-PRX150 Cordless - Panasonic Middle East
Explore the Panasonic KX-PRX150 - Cordless - with Touchscreen and Answering System
www.panasonic.com
Click to expand...
Click to collapse
The specs is 4.0.4 Android?
According this:
Can you confirm? this phone is Mediatek or other Soc??
hon_de said:
If it's helpful for you I can send you the whole rom or the recovery-from-boot.p and the .sh file.
Click to expand...
Click to collapse
If you have ROM-firmware so the recovery.img is not there?!
If your phone is Mediatek so you can use the https://forum.xda-developers.com/t/...ot-tools-mediatek-android-smartphone.2160490/
or
Use/Search any video in the YT about: Read Back with Smarth Phone Flash Tool (SPFT). But you need scatter file for use SPFT (xda) and that's in the stock firmware.
if your device has other Soc like qualcomm or Unisoc or ??? so you need the specific tool or correct method to copy the recovery.img part directly from your phone.
DragonPitbull said:
The specs is 4.0.4 Android?
According this:
Can you confirm? this phone is Mediatek or other Soc??
Click to expand...
Click to collapse
This is the phone.
Android: 4.0.4
I can't find what CPU has.
hon_de said:
This is the phone.
Android: 4.0.4
I can't find what CPU has.
Click to expand...
Click to collapse
Use any AIDA or HW apk information to know which Soc is.
DragonPitbull said:
Use any AIDA or HW apk information to know which Soc is.
Click to expand...
Click to collapse
It is Mediatek.