Database Info

Convert to GPE and upgrade to Lollipop, how to?

I have a MotoG GPE (I buy from Google Play Store) but when I get it I convert from GPE to non GPE so I can install ROM like Cyanongen or others. Now I'll like to test new 5.0.1 via OTA since there is no factory images yet I I'll like to know which are the steps I should follow in order to do this. I have this files in my power: 4.4.2(Android) KOT49H(Build) 41.05(Bootloader) 1032.340.63.00R(Baseband), 4.4.4(Android) KTU84P(Build) 41.13(Bootloader) 1032.390.81.01P(Baseband), 5.0.1(Android) LRX21Z(Build) 41.18(Bootloader) 1032.3108.94.00R(Baseband) so should I downgrade to 4.4.2 then upgrade to 4.4.4 and then upgrade to 5.0.1? Is that the right flow? If this is is the right flow then for downgrade to 4.4.2 I should do it using this:
Code:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk1
mfastboot flash system system.img_sparsechunk2
mfastboot flash system system.img_sparsechunk3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Then repeat the whole process for 4.4.4 and then sideload 5.0.1 OTA update? Is that right? I have fear since I see many bricked their phones and I tried some days ago and get stuck on the Google boot logo for at least 5 min and get back to TWRP recovery for restore the previous backup was tedious almost 5 hours to get back my phone, so I need some advice from experts here. What are the right steps to update my phone and what you would say for this 5.0.1 will be good to leave a custom ROM for get into this one?

[q] moto g - soft-bricked!

I've been reading forums on here all day and nothing seems to match my problem down to the letter.
Here is my problem, I thought this morning it would be fun to upgrade my Moto G, was rooted on Kit Kat (perfectly fine -_-) to Lollipop. I followed a tutorial with great feedback and thought what could go wrong? Turns out everything could go wrong and after following every step perfect, my phone was bricked. It just displayed the Warning: Bootloader Unlocked screen and does nothing else.
I'm able to get in to recovery, have all the ADB tools installed, tried every tutorial, non-stop, the entire day and nothing is working.
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
When I type almost any of these commands I'm met with this: "error: cannot load 'gpt.bin': No error" not just for gpt.bin though, for anything? Althought these commands worked fine when bricking my phone
My phone is a single sim XT1032 Moto G. Can someone please help? I just want my phone fixed. I don't care if I never have to have Lollipop on it, it was fine the way it was and wish I'd just left it that way.

What lollipop ROM are you trying to flash? The gpe ROM uses a slightly different file format than a retail lollipop ROM.

MOTO E Not showing anything on display after installing Stock firmware

Dear all,
I updated my moto e 1st generation to Lollipop 5.0 successfully. I used mobile for one week. After i decided to install Android kitkat stock firmware again to my MOTO E. I installed stock firmware to my moto e by following guidlines from
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk1
mfastboot flash system system.img_sparsechunk2
mfastboot flash system system.img_sparsechunk3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
everything went well, it has to restart automatically but it has not restarted at all. Now situation is that if we try to power On the mobile by pressing power key it doesnt show anything. Only notification LED blinks continuosly after pressing power button during charging only. Now on display nothing is coming except notification LED. I tried for charging mobile for 4 Hrs. continuously but during charging also nothing is displaying on display. If display comes then only i can try again for installing stock firmware. I also removed battery after unscrewing the mobile back cover and waited for around 2 Hr. Then again i fixed battery connectors then tried again nothing responded by mobile. I think my mobile is dead but i know you are great developers who can suggest best methods to solve these type of issues. please write me how can i solve this problem..?
Regards
Vinod Kumar

Soft bricked Moto G and random reboots

I know the title is a bit confusing, but I will try to explain the context of my situation so you can understand it better.
I have a x1032 since the end of 2013. When the first image of the Google Play Edition went "public", I converted my device to it, and it stayed that way, doing all the OTA updates, until the 5.1 GPE appear.
When I did the update to this version (5.1 GPE), my compass didn't work with some apps (for example, GPS tools and c:geo), and as it is a sensor that I use most of the time, I decided do revert my device from fastboot to the 4.4 “stock Motorola” (don’t remembre if it was 4.4.2 or 4.4.4) and then update it to the 5.0.2.
In the process, I think that I had a soft brick: when I turned on the device, he stayed in the “unlocked bootloader” image, and he didn’t move forward. But, after trying, I saw that I had access to the bootloader menu and to the recovery, without any problem. I tryed to install the images via fastboot, even the new 5.1 GPE and 5.02 Motorola ones, but none of them works.
I searched, and searched, and finally understand that in this cases, the problema is the /system, /data and /cache partitions that need to be formated, and then I can flash any zip rom via recovery.
And now, this is where I stay: Via fastboot I installed the 5.1 GPE rom. Then I installed philz touch recovery, formated all partitions in ext4, wipe them all (just to be sure ), and did an adb push to have the GPE 5.1 zip ROM from @lost101 in my sdcard, and installed it. AND IT WORKS!
Now, the actual problem: I’m having form time to time some random reboots. They always appear after I try to turn the screen on, and after 3 or 4 seconds, the phone reboot.
Can this be related to the softbrick? I tought it could be a rom problem, but no one else have the same complains and @lost101 says that maybe this is from my phone.
Thanks in advance, and sorry for the long text and my bad english.

I suggest you try flashing the GPE 5.1 Firmware Image available here: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Make sure you use only the following commands and use mfastboot available here: https://www.androidfilehost.com/?fid=23578570567719065
mfastboot flash partition gpt.bin
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot​
You should not need to manually format partitions. The above commands will do everything for you. The reason for your sensor issues are that the fastboot flashing previous was not successful.
Please do the fastboot commands manually, one at a time, and log everything and post it here.

lost101 said:
I suggest you try flashing the GPE 5.1 Firmware Image available here: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Make sure you use only the following commands and use mfastboot available here: https://www.androidfilehost.com/?fid=23578570567719065
mfastboot flash partition gpt.bin
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot​
You should not need to manually format partitions. The above commands will do everything for you. The reason for your sensor issues are that the fastboot flashing previous was not successful.
Please do the fastboot commands manually, one at a time, and log everything and post it here.
Click to expand...
Click to collapse
You are absolutely right: there were no errors (except the "normal" validation erros because it's a GPE image), and in the end, I didn't need to format the partitions manualy.
I think the problem was the fastboot (I was using the one from the sdk... my bad!).
Now I know that any problems don't come from the software side, because in that part, everthing is ok.
I will just ask you two more things:
- What custom recovery do you recomend?
- Your Low Memory Killer Tweak works without any problem in the 5.1 GPE installed via fastboot?
Thank you very much for your help. You really made my day.

RBras said:
I will just ask you two more things:
- What custom recovery do you recomend?
- Your Low Memory Killer Tweak works without any problem in the 5.1 GPE installed via fastboot?
Click to expand...
Click to collapse
Latest TWRP. Yes, the LMK Tweak will work in that case.

lost101 said:
I suggest you try flashing the GPE 5.1 Firmware Image available here: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Make sure you use only the following commands and use mfastboot available here: https://www.androidfilehost.com/?fid=23578570567719065
mfastboot flash partition gpt.bin
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot​
You should not need to manually format partitions. The above commands will do everything for you. The reason for your sensor issues are that the fastboot flashing previous was not successful.
Please do the fastboot commands manually, one at a time, and log everything and post it here.
Click to expand...
Click to collapse
Unfortunately, random reboots are still present
I have installed 5.1 Google Play edition factory image, with the mfastboot you told me, but it still reboots randomly. Did the same with the 5.02 EU from Motorola, and it behaves the same way.
The random reboots happen more or less, one time a day, and it's when I try to turn the screen on, it doesen't respond, and after 3 or 4 seconds, the system reboots.
Any clue of what can be? Is there a way to grab some logs to try to understand what's happening, or it is too difficult and it's better I don't have too many hopes?

It would appear some sort of corruption has occured. I can't say anything with certainty - but I do believe Bootloader corruption could cause what you are experiencing.
It's possible you could fix this by reflashing the Lollipop Bootloader. I did not include the fastboot command to do this above.
Here it is: mfastboot flash motoboot motoboot.img
Try that and report back.

lost101 said:
It would appear some sort of corruption has occured. I can't say anything with certainty - but I do believe Bootloader corruption could cause what you are experiencing.
It's possible you could fix this by reflashing the Lollipop Bootloader. I did not include the fastboot command to do this above.
Here it is: mfastboot flash motoboot motoboot.img
Try that and report back.
Click to expand...
Click to collapse
During my time with Moto G, I flashed it using fastboot, dozens of times, but I was so desperate in the other day that I didn't even notice that your list with commands didn't have the bootloader one.
Now I undestand why the bootloader I have is the one from 5.1 GPE.
I'm gonna try it. In the last 2 days I didn't have any random reboot, but I will take my risk and flash the bootloader from the 5.0.2 EU, and I will report back in the next days.
I'm buying you a beer today, for being so helpful and nice. Thank you very much.

I'm reopening this thread to try to see what's happening with my phone.
So, after flashing the bootloader of the 5.1 GPE, the phone was really better than it was in the OP.
My Moto G didn't reboot anymore when I tryed to turn the screen on, but instead, it started to reboot randomly every 2 or 3 weeks, without needing to touch the phone (the phone was rebooting by itself).
In the last month or so, I'm using the XT1032 Retail EU 5.1 (Optimized) v1.0 from @lost101, and now the behavior is, once again, the described in the OP: I try to turn the screen on, the phone doesen't respond, and after 3 or 4 seconds, it reboots by itself.
And this is happening once every 1 or 2 weeks.
So, can anyone give me some help to try to understand what's happening? @lost101 @luca020400 @LuK1337 @matmutant
Usually, I have the original firmwares from Motorola or GPE, or I can have the optimized versions from @lost101 with TWRP.
Thanks for your help, guys!

Just for the record, I get occasional sudden / unexpected power off. It's rare, but stuff can happen when you are dealing with a complex device such as a smart phone. This is especially so, if you are rooting / modifying the operating system.
The problem could be related to something you are installing. Also, I recommend a clean install once every few months.

[Windows Tool] Moto G 2015 XT1072 Restore to to Stock Android 5.0.2

HI FRIENDS!
This is a one-click tool I made to automatically restore your device back to stock firmware. This is for Windows only at the moment. This tool can restore your device to stock when the device is booted up, in a bootloop, in recovery, or in booloader mode (fastboot mode).
Introducing my new "Restore to Stock" tool for Windows! This is tool currently supports XT1072.
So how do u restore to stock?
***This will wipe all your data***
Step 1)
Download the "Moto G 2014 Restore to Android 5.0.2" zip from here:
XT1072:
1) Firmware 22.46.28 [5.0.2-EU] - LINK
Step 2)
Extract the .zip to a location on your PC/Laptop you can easily access
Step 3)
Plug your Moto G 2015 into your computer
***Make sure all the proper device drivers are installed***
Step 4)
In the extracted folder, find a file called "Auto Restore Script" and click it (It is a Windows batch file)
Step 5)
In less than 5 min. your Moto G 2015 will be restored to stock firmware
NOTE: I RECOMMEND YOU TRY THIS TOOL OUT ON YOUR MOTO G, SO JUST IN CASE IF YOU EVER ARE IN A PROBLEM (BOO-LOOP, CORRUPT PARTITION, ETC.) YOU KNOW HOW TO USE THIS TOOL AND U ARE ASSURED THIS TOOL WORKS! ​
If you like my work please donate by clicking "DONATE TO ME" on the left side of this post under my XDA username.
ALL DONATIONS ARE GREATLY APPRECIATED!

Oh my god, your lovely tool just saved my new Moto G from bricktown after an aborted attempt at rooting. Cannot thank you enough.
One note I want to add: in order to get this to work, I had to move the files into the same folder as my 'fastboot' and 'adb' installation, and also remove the 'm' from the start of each line. Otherwise, it worked perfectly.
Thank you thank you thank you!

you really need to add the mfastboot.exe file to this as in its current state it is not working until you add the file yourself. either add the file or change the script to use normal fastboot

Just to confirm ... will this restore my Moto G back 100% to how it was before I started rooting (and I can then receive official updates)? There are so many different versions of Moto G 2nd generation, like 2014 vs. 2015, Europe vs. USA, etc. I just want to be sure.
I tried rooting my phone yesterday, and I might want to go back to default at some point (I only unlocked bootloader + installed TWRP + installed SuperSU).
See attached photo of my phone's stats.

The link is broken

I have the file. I try to share it this weekend.
EDIT:
Here you are
https://dl.dropboxusercontent.com/u...1072] Restore to Android 5.0.2 (22.46.28).zip

Anyone have this already and can reupload it?

doesn't work on my XT1072
with my old phone, the galaxy nexus, it will take 1 click and 5 minutes time to restore to stock firmware with a simple toolkit, now i look like a freaking noob.

RandyRhoads1821 said:
doesn't work on my XT1072
with my old phone, the galaxy nexus, it will take 1 click and 5 minutes time to restore to stock firmware with a simple toolkit, now i look like a freaking noob.
Click to expand...
Click to collapse
Same here

if it doesn't work try this:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot

Link doesn't work
EDIT: NVM, just saw the other post

mendelssohn said:
if it doesn't work try this:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
Click to expand...
Click to collapse
I tried the whole process, but with "mfastbond" instead of "fastbond" ;-P, and it worked nicely, thanks a lot.
Piece of advice, DON'T SKIP THE ERASE USERDATA LINE!!, I tried to save me the time of setting up everyting again, and I had a memorable UPS! moment, when the boot process stopped into a black screen... thank god I could reboot into bootloader mode and start again :_o

switch to br retail from EU rom
after i install this EU rom, can i install a stock retail from brazil? as i am in Brazil, not EU. myne is a xt1078, updated to 6.0 but it is stuck in fastboot mode, with locked boot. tryed few comands no use,

did not work. mine is a xt1079. guess the same as the 1072. tried manual commands but still no use. any other help?
Shawn5162 said:
HI FRIENDS!
This is a one-click tool I made to automatically restore your device back to stock firmware. This is for Windows only at the moment. This tool can restore your device to stock when the device is booted up, in a bootloop, in recovery, or in booloader mode (fastboot mode).
Introducing my new "Restore to Stock" tool for Windows! This is tool currently supports XT1072.
So how do u restore to stock?
***This will wipe all your data***
Step 1)
Download the "Moto G 2014 Restore to Android 5.0.2" zip from here:
XT1072:
1) Firmware 22.46.28 [5.0.2-EU] -
Step 2)
Extract the .zip to a location on your PC/Laptop you can easily access
Step 3)
Plug your Moto G 2015 into your computer
***Make sure all the proper device drivers are installed***
Step 4)
In the extracted folder, find a file called "Auto Restore Script" and click it (It is a Windows batch file)
Step 5)
In less than 5 min. your Moto G 2015 will be restored to stock firmware
NOTE: I RECOMMEND YOU TRY THIS TOOL OUT ON YOUR MOTO G, SO JUST IN CASE IF YOU EVER ARE IN A PROBLEM (BOO-LOOP, CORRUPT PARTITION, ETC.) YOU KNOW HOW TO USE THIS TOOL AND U ARE ASSURED THIS TOOL WORKS! ​
If you like my work please donate by clicking "DONATE TO ME" on the left side of this post under my XDA username.
ALL DONATIONS ARE GREATLY APPRECIATED!
Click to expand...
Click to collapse

help
mendelssohn said:
if it doesn't work try this:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
Click to expand...
Click to collapse
still dont work

erprando said:
after i install this EU rom, can i install a stock retail from brazil? as i am in Brazil, not EU. myne is a xt1078, updated to 6.0 but it is stuck in fastboot mode, with locked boot. tryed few comands no use,
Click to expand...
Click to collapse
Hey mate don't know if you fixed the problem but you can find the latest image for you phone xt1072 BR
MM XT1078_THEA_RETBR_DS_6.0_MPB24.65-34_cid12_subsidy-DEFAULT_CFC.xml.zip
or latest 5.0.2 whit stagefright fix
LL XT1078_THEA_RETBR_DS_5.0.2_LXB22.99-24.12_cid12_subsidy-DEFAULT_CFC.xml.zip
To flash this use the minimal fastboot folder in my sign and the correct bat script LP/MM, just put everything in the same folder and launch the bat
lucifermorn said:
still dont work
Click to expand...
Click to collapse
Grab the latest stock image for your phone from the repo linked in my sign, read the first answer in this post reply on how to flash it.
-------------------------------------------------------------------------------------------------------
Most of the times if you didn't flashed the wrong files you can recover from a bootloop by wiping data/cache (factory reset) whit bootloader or fastboot.
As @lucifermorn noted the original updater.bat file included by th OP wasn't complete, motoboot.img missing if i'm correct, and wasn't using mfastbootv2.
You can find bat scripts for flashing stock roms in my sign, latest minimal fastboot+mfastbootv2, and a link to the moto g stock roms repo on filefactory.
PS
@vegdroid that image is old too, latest 5.0.2 whit stagefright fix is 22.99-24.12 if i'm correct.
Check the moto g stock images repo linked in my sign.
EDIT
Ouch @erprando just realized you wasn't asking, but stating that you have flashed an xt1072 rom on an xt1078, that a very bad thing, if my bat script isn't working you know why.

help
mendelssohn said:
if it doesn't work try this:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
Click to expand...
Click to collapse
IVE TRIED EVERYTHING, CAN SOMEONE PLEASE GO IN DETAILS ON THE STEPS TO ENSURE IT WORKS, IM DESPERATE:crying:

This works fine but only if you add the mfastboot files. Moto G 2nd XT1072 Tesco. Saved me from a previous Marshmallow custom rom! Many thanks.

help
ArchieGodfrey said:
This works fine but only if you add the mfastboot files. Moto G 2nd XT1072 Tesco. Saved me from a previous Marshmallow custom rom! Many thanks.
Click to expand...
Click to collapse
how do i get tge moto g 2nd XT1072 Tesco?
---------- Post added at 06:56 PM ---------- Previous post was at 06:06 PM ----------
Never mind i fixed it xd i dont know how but thank god its fixed

Guys this bat script or how some call it "WINDOWS TOOL" (make me laugh), is not OK from a loooooong time, check by yourself, USE AT YOUR OWN RISK.
Bootloader is left behind......
wrong script said:
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot.exe reboot
Click to expand...
Click to collapse
bootloader.img ??? anyone noticed this file in the zip or any lollipop/mm stock rom?? is this from gen1 kikat roms ?
right script said:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Click to expand...
Click to collapse