Related
Hello, guys!
I've been using Odin for some time, I messed up my phone once, but then restored it...
Now what I'd like is to know exactly how it works, which files it writes (csc, pit, etc). I.e., I want to understand the internals.
After 10 minutes of googling, I didn't find absolutely anything about who makes this software and what's the official site and where can I find the docs.
Is there any chance that someone could point me to the right direction? At least the docs?
Thanks in advance!
Igor
I only know that's Samsung made. Google explains me that it was made by Jeong-Hwan Min Seung-Bum Kang.
http://www.faqs.org/patents/app/20080209201
it's a closed samsung software that no one fully understands
Thanks for the information.
c4manceph said:
Thanks for the information.
Click to expand...
Click to collapse
Well, no, I actually appreciate it
You see, I didn't even know that it was made by Samsung
It seemed to me that they used it to update apple devices as well, but obviously I was wrong.
Anyhow, my next question is: what every control in this program means? What are the files that you choose before the upload? PIT, Bootloader (is it like lilo or grub in linux?), PDA, Phone and CSC (heard that it is used for file allocation, but not sure). I guess, these should be more or less the same for every Android, not just a Samsung, right?
There are also the checkboxes: Re-partition (I kinda have a vague notion of what it does, but it's... vague), F. reset time, Phone EFS Clear?
Thanks in advance!
Igor
I would say you should hit up Benjamin Dobell, the creator of Heimdall. Since Heimdall is reverse-engineered from Odin, I would say he's a knowledgeable person concerning Odin.
Odin is a developer tool made by samsung that was leaked to the community to allow for flashing the modem and operating system with partitions to the compatible samsung phone.
It in conjunction with the drivers for your android device it will create a virtual serial com port , usually COM4 or COM5.
There are many posts on Odin on the forums, use search and you might be surprised what else you may pick up.
Hope this helps.
Thanks, guys!
It can be what you put back on your device after you bricked it. Or if you are rooting you can flash that on there to get root with a rom and Clockworkmod
tyvallely said:
It can be what you put back on your device after you bricked it. Or if you are rooting you can flash that on there to get root with a rom and Clockworkmod
Click to expand...
Click to collapse
Thanks, but it's a little... superficial. I know that you use it to upload some firmware stuff (new os, modded os, etc), I need more concrete info...
One down: csc
Just searched for "What is csc?"
http://forum.xda-developers.com/showthread.php?t=772201
Mithent said:
CSC is the Country/Carrier Specific Code (not sure exactly which it is, both kinda make sense). It contains the files for customisation for specific networks, so will have the APN settings, maybe custom ringtones or backgrounds, and can have programs too. Some CSC files contain a lot more than others, hence the file size differences.
Mixing different PDA/PHONE/CSC files is certainly possible, although it might be best not to stray too far on the PDA and PHONE side. The CSC isn't really very important in most cases - at worst you'll probably just have to set up the APN manually.
Click to expand...
Click to collapse
Found another one (.PIT files) here:
http://forum.xda-developers.com/showthread.php?t=771426
Richthofen said:
As far as I know .pit files are only used to tell Odin which file names to program to which "partition".
Even if separate images are used, Odin will treat them as a single image.
For example .pit file tells Odin to program modem.bin file to MODEM "partition", zImage to KERNEL "partition", etc.
If you use separate images (3-pack, CODE, MODEM, CSC), you can for example put CSC to CODE, MODEM to CSC and vice versa. Nothing odd will happen as long as you don´t tamper with the file names inside the tarballs.
Click to expand...
Click to collapse
Heimdall
A nice article on Heimdall:
http://forum.xda-developers.com/showthread.php?t=755265
i would suggest hemdall ... much better way to go about things
For those who have been living under a rock, problematic leaked builds of ICS were released for several different Samsung devices a few months ago. Users of those Devices for instance soon discovered that their devices were being ffected by what came to be known as the MMC_CAP_ERASE bug. Shortly after this*occurred, XDA Senior Member hg42 came up with a way to revive downed devices.
Now thanks to some more ingeniuty on his part, hg42 has also developed a companion application known as Partition Scanner to assist in this process.*The application features:
emmc_scan_all_partitions_once.zip
emmc_scan_all_partitions_infinitely.zip
these allow fast scanning of all blocks of all emmc partitions in 1MiB steps.
The main purpose is to access each emmc block to find any bricked block in the partitions after repartitioning.
The “infinitely” variant runs checks infinitely, which may help to find emmc brick effects which only occur sporadically (if such effect really exists). Run this as long as you want. Reboot to finish.
If this freezes the last partition shown may have a bricked block inside.
emmc_find_brick_start.zip
emmc_find_brick_end.zip
these scan the whole emmc device.
emmc_find_brick_start starts scanning from the beginning of the device upward.
emmc_find_brick_end searches the end of the device and then scans downward.
If this runs up to the end or down to zero (showing a message with “completed –> OK”), no bricked block was found.
If it freezes, the block shown last with “…” at end of line is the first bricked block in that direction.
The line before with “-> ok” is the first usable block before/after the brick.
The application has received excellent reviews, so if you’re one of those people currently facing an EMMC issue, or you had the issue previously and gave up on your device, head on over to the companion thread and give this a go.
Click to expand...
Click to collapse
Original xda news: http://www.xda-developers.com/android/partition-scanner-helps-your-emmc-bricked-devices/
Original thread by hg42: http://forum.xda-developers.com/showthread.php?t=1667886
He even provides PITs for our devices, so get a bit into Linux, and fix it by yourself, You can't make it worse I guess..
Anything more to say? Hang onto it, unbrick it and kick Samsungs ass once again!!
Greetings from Australia!
Sent from my GT-P6200 using xda app-developers app
Bad2hold said:
Original xda news: http://www.xda-developers.com/android/partition-scanner-helps-your-emmc-bricked-devices/
Original thread by hg42: http://forum.xda-developers.com/showthread.php?t=1667886
He even provides PITs for our devices, so get a bit into Linux, and fix it by yourself, You can't make it worse I guess..
Anything more to say? Hang onto it, unbrick it and kick Samsungs ass once again!!
Greetings from Australia!
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
@Bad2hold - have you tried this yourself as I am desperate for help in unbricking my device that Samsung refuse to repair as it is the P-6200L (non-UK model).
I can't use ADB as my pc won't recognise the Tab, have tried flashing the .pit file and firmware but no joy, can't use the partition scanner as I can't get it to scan the internal memory (it scans the external SD card instead).
I can install CWM recovery and also get to stock recovery but the Tab will not go past the white Galaxy Tab logo.
Any help is highly appreciated
There is good chance you can recover. try multiple factory resets. flash earlirst odin package, preferrably with a boot.bin, after flash, and stuck on logo, boot to recovery and factory reset. try wiping a few more times if it is still stuck. i usually have to do this when going back to stock. one time i had to wipe from custom recovery, and a combonation of other things..
If you have recovery, youre lucky.
If you give up, you can for JTAG, normally for hard bricks. mobiltechvideos.com saved me from hardbrick.
Id play around a bit before I send to JTAG.
best of luck..
chrisrotolo said:
There is good chance you can recover. try multiple factory resets. flash earlirst odin package, preferrably with a boot.bin, after flash, and stuck on logo, boot to recovery and factory reset. try wiping a few more times if it is still stuck. i usually have to do this when going back to stock. one time i had to wipe from custom recovery, and a combonation of other things..
If you have recovery, youre lucky.
If you give up, you can for JTAG, normally for hard bricks. mobiltechvideos.com saved me from hardbrick.
Id play around a bit before I send to JTAG.
best of luck..
Click to expand...
Click to collapse
Thanks for the advice mate.
Am going to flash it with the honeycomb firmware it came with from Sammobile and try a few factory resets to see if that works.
If not have found a place in the UK that will JTAG it for £38 if all else fails...:good:
UPDATE: Honeycomb doesn't let me access recovery so no way to wipe from there. Recovery is available on an ICS rom but am reluctant wipe in stock recovery as that's how I go in this mess to begin with :crying:
I currently cant help, as iam travelling without a pc... but this guy who developed this scanner, has pit files available for our device. So there is a good chance to get help from him. And iam sure, with some hours off every week, where u get bored, u can actually fix it by yourself as u already figured out that much... i would love to help, its a challange you know? maybe iam gonna buy a laptop... =p
Update: just curious, is it scanning without a external sd inserted? Because internal and sd are swapped in cwm recovery since 3 versions too...
Sent from my GT-P6200 using xda app-developers app
@Bad2hold - Thanks for the reply, have tried flashing the .pit file but no joy.
Can't get the scanner to scan internal card as it's loaded on my external sd and can't push it to the internal which then means I can't remove the external sd.
Have tried flashing various honeycomb and ICS firmwares with a combination of .pit files, the process flashed fine without errors but still no boot past the white Samsung writing
Sent from my GT-I9300 using xda premium
Just one question:
do I use it if my device got bricked (fortunately it s not the case), or do I use it to remove the brick bug risk from my device?
Thanks for your answer...
unclefab said:
Just one question:
do I use it if my device got bricked (fortunately it s not the case), or do I use it to remove the brick bug risk from my device?
Thanks for your answer...
Click to expand...
Click to collapse
I think we cannot remove the brickbug on stock ICS...that pit file just for solving hardbrick issue...
Sent from my GT-P6200 using xda premium
U can actually remove the brick bug issue, this is, what this post is about.
Basically, you just have to find the bad blocks in your sd partition.
After you found them, all is left, is to repartition your sd around the bricked blocks, which you have to delete from your partition.
He mentions several methods to use adb and other tools, helping to do this.
And i really recommend reading a bit through his first post, found the same problem after a minute:
I also had the following problem:
I couldn't format my internal sdcard with the cm9 recovery. I think it's too big for the mkfs.vfat tool of current cm9. So I installed another recovery, formatted the internal sd (I thought).
This erased all my current backups and downloads, because in reality it was my external sd. Fortunately I had a backup of the external sdcard from before rescuing my phone.
So, you may want to create a backup of your external sdcard first.
Then double check which is your internal sdcard (the UMS partition) and which is your external sdcard.
Or you could remove the external sd completely. But think about when to remove it, because you might need it for some files (e.g. to use the emmc partition scanner).
Click to expand...
Click to collapse
Of course, if u r not familiar with linux, u probably wont fix it in an hour.
But you can learn a lot within an hour. First of all, figure out how to connect your device to adb. (Which is still possible, if you didnt smash your tab against the wall or so...) After that, it should be lot easier to follow his instructions.(not just because u have adb working, but because you know what he is actually talking about.)
And he is really willing to help, so figure out as much as possible after connected to adb and just ask in his post if you get stuck.
Dont forget: if its not a issue by malfunctioning/broken hardware, then you actually can fix everything with your pc, you just need to know how.. so dont give up!!!
here his post again: http://forum.xda-developers.com/showthread.php?t=1667886
And @kersey: what pit file did u flash? The pits he provides are to repartition your SD AFTER you located the bricked blocks. But you cant know, if you cant get his scanner running..? You have to format data partition in recovery after flashing one of those, because of missing file system.
Note: Never flash a stock ICS after you fixed it. It will brick your device again. But u r safe with cm9 and others.
Sent from my GT-P6200 using xda app-developers app
Good news all, after much trial and error and more flashing than your average pervert I have revived my tablet from the dead with a big thank you to hg42 for his scanner and extra advice.
Thanks to all those who helped in this post too :good:
Dude, if you dont mind, what exactly have you done to revive your tab?
Not exactly, just a quick guide to avoid the most common mistakes.
Thanx!
Sent from my GT-P6200 using xda app-developers app
Bad2hold said:
Dude, if you dont mind, what exactly have you done to revive your tab?
Not exactly, just a quick guide to avoid the most common mistakes.
Thanx!
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
It was pretty simple to revive it with hg42's help.
The first thing you need to do is ensure you have CWM recovery, as the scanning tools only work with that.
Download hg42 emmc partition scanner from the link on the first page of this topic and copy to all 5 zip files to your external sd card. You will also need to download hg42's patched .pit file for your model of tab.
Boot into CWM recovery and flash emmc_find_brick_start.zip. This will scan you tab and will freeze on a bad block. Make a note of the number it freezes on.
Now flash the emmc_find_brick_end.zip file and once again make a note of the number the tab freezes on.
You now need to select the patched .pit file that falls within the range of brick start and brick end. e.g. my brick_start was 1074 and brick_end was 2147 so the patched .pit file I flashed with Odin was "P6200_tabplus--patched--brick-between-281-and-2160-MB--FACTORYFS-moved-by-1792-MiB"
I once again entered CWM recovery and did a scan using emmc_scan_all_partitions_once.zip. Which verified there were no errors.
I then booted up the Tab and hey presto it was alive again.
Feeling brave I then flashed the latest Austrian 4.0.4 firmware followed by permanent CWM recovery making sure that I can never do a factory reset using stock recovery which cause the brick to begin with.
Hope the above makes sense to those who need it, I'm sure as you go through the processes above it will.
I'd also like to encourage anyone who uses hg42's emmc tools to offer a donation as without him I would have had a very expensive paperweight or would have had to pay to get it JTAG'd
Happy Boy
Hi all
While trying to root and install custom rom I bricked my friends phone. I have been going crazy trying everything I could to get this brick back to life.
ITS ALIVE AGAIN!!!!!!!!
Thank you kersey for your post on how you got your Tab back.
This is what I did.
I installed the 5 files on the SD card.
120824-151927-emmc_find_brick_end
120824-151927-emmc_find_brick_start
120824-151927-emmc_scan_all_partitions_infinitely
120824-151927-emmc_scan_all_partitions_once
120824-220105-emmc_scan_write
I put the phone into recovery mode and ran 120824-151927-emmc_find_brick_start.
The program started scanning the memory and first froze on 2188.
I got back into recovery and ran 120824-151927-emmc_find_brick_end
once again the program started counting down and froze about 3189.
For this phone the correct pit files were in " pits-N7000_16GB "
I unzipped pits-N7000_16GB and looked for the nearest pit file , which was
N7000_16GB_Q1_20110914--patched--brick-between-1174-and-3321-MB--DATAFS-moved-by-2048-MiB.pit
I then put the phone back into download mode and using Odin flashed the patched pit file above.
Disconnecting the phone from computer I went back into recovery and ran120824-151927-emmc_scan_all_partitions_once
For the first time I was able to do a full scan without the program freezing.
Next step was installing Abyss Kernel 4.2. I then did the regular data wipe/cache wipe/dalvik wipe.
And finally I installed Rocketrom 11.
The phone rebooted and then came back to life.
I checked the internal memory and it was down to 9gb, but who cares as long as its ALIVE AGAIN !!!!
hg42 you sir are an absolute legend. Donation coming your way.
This method definitely works . Just be patient. I hope This helps others aswell
EDIT:
Is there any not so hard way to install the original rom with the pit i need? cm10 works, but i dont like it so much.
p6201dbtlpc_p6201xxlpc_p6201xxlp3_home.tar i would like to use
but i only know to flash this in odin, becouse it is no zip, i have no clue how to flash it in cwm
thanks for an answer!
-----------------
Your post should be on first post added =)
And in http://forum.xda-developers.com/showthread.php?t=1807002 !
Thanks for it!
kersey said:
It was pretty simple to revive it with hg42's help.
The first thing you need to do is ensure you have CWM recovery, as the scanning tools only work with that.
Download hg42 emmc partition scanner from the link on the first page of this topic and copy to all 5 zip files to your external sd card. You will also need to download hg42's patched .pit file for your model of tab.
Boot into CWM recovery and flash emmc_find_brick_start.zip. This will scan you tab and will freeze on a bad block. Make a note of the number it freezes on.
Now flash the emmc_find_brick_end.zip file and once again make a note of the number the tab freezes on.
You now need to select the patched .pit file that falls within the range of brick start and brick end. e.g. my brick_start was 1074 and brick_end was 2147 so the patched .pit file I flashed with Odin was "P6200_tabplus--patched--brick-between-281-and-2160-MB--FACTORYFS-moved-by-1792-MiB"
I once again entered CWM recovery and did a scan using emmc_scan_all_partitions_once.zip. Which verified there were no errors.
I then booted up the Tab and hey presto it was alive again.
Feeling brave I then flashed the latest Austrian 4.0.4 firmware followed by permanent CWM recovery making sure that I can never do a factory reset using stock recovery which cause the brick to begin with.
Hope the above makes sense to those who need it, I'm sure as you go through the processes above it will.
I'd also like to encourage anyone who uses hg42's emmc tools to offer a donation as without him I would have had a very expensive paperweight or would have had to pay to get it JTAG'd
Click to expand...
Click to collapse
ICS update and emmc bug
Hi; not sure if right forum, but here goes ,
I updated my tab plus to ics 4.0.4 using alpn and xlpn file from sammobile using odin from pc,
tab was never rooted only used a launcher
so my question is after i have installed ics and will not root or use cwm ,will i still have to worry about the emmc bug and if yes
is it best just to go back to honeycomb
btw all is running well on ics just worried about bricking
thank you in advance
doaft said:
Hi; not sure if right forum, but here goes ,
I updated my tab plus to ics 4.0.4 using alpn and xlpn file from sammobile using odin from pc,
tab was never rooted only used a launcher
so my question is after i have installed ics and will not root or use cwm ,will i still have to worry about the emmc bug and if yes
is it best just to go back to honeycomb
btw all is running well on ics just worried about bricking
thank you in advance
Click to expand...
Click to collapse
If you chose to do a factory restore via stock recovery, which is what you have due to not being rooted and not having CWM installed there is a very big chance you may brick your device. I speak from experience!!!
If you are that worried I would flash back to honeycomb rather than risking having an expensive paperweight
Sent from my GT-I9300 using xda premium
A little of my own experience with superbrick
Bad2hold said:
Dude, if you dont mind, what exactly have you done to revive your tab?
Not exactly, just a quick guide to avoid the most common mistakes.
Thanx!
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
You guys can follow this guide I wrote for the Galaxy Tab 7.7 (which also suffers from mmc_cap_erase) : http://forum.xda-developers.com/showthread.php?t=1862294
Just replace the partition numbers with the ones parted shows you.
The problem is, either way you followed, after being revived your tab will :
- rebrick everytime you flash anything
- Have less than 1gb of internal storage
- Hang everytime you want to download an app or whatever
To fix the last 2 problems, you need to make an ext2sd script to swap your internal-sd and external-sd.
To do so, go to /dev/block/vold : you'll see two files named with numbers (i.e : 22:48 179:48), note the name of those 2 files (one of them is your external-sd mount point)
Then replace the "xxx:xx" in the following script with the name of the first file :
Code:
mount -t vfat -o umask=0000 /dev/block/vold/xxx:xx /storage/sdcard0
mount -o bind /data/media /storage/sdcard1
Save this script in a file called ext2sd1.sh and use Script Manager to run it "as root" and "at boot", now reboot and go to settings/storage : if the first file was your extsd mount point your internal and external storage should now be swapped (i.e : if you have a 64gb external sdcard the settings will show : internal storage : 64gb, and you can actually install 64gb of apps).
If it didn't work, replace the xxx:xx in the script with the name of the second file, then it should work.
Good luck guys, this superbrick is a damn pain in the ass, we can thank sammy for it
P6200
Hello man... I saw your post ''Good news all, after much trial and error and more flashing than your average pervert I have revived my tablet from the dead with a big thank you to hg42 for his scanner and extra advice.
Thanks to all those who helped in this post too'' ... I have the same problem with my P6200. Please give me that scanner to fix it or tell me how to put my tablet back On... Thanks
Androguide.fr said:
You guys can follow this guide I wrote for the Galaxy Tab 7.7 (which also suffers from mmc_cap_erase) : http://forum.xda-developers.com/showthread.php?t=1862294
Just replace the partition numbers with the ones parted shows you.
The problem is, either way you followed, after being revived your tab will :
- rebrick everytime you flash anything
- Have less than 1gb of internal storage
- Hang everytime you want to download an app or whatever
To fix the last 2 problems, you need to make an ext2sd script to swap your internal-sd and external-sd.
To do so, go to /dev/block/vold : you'll see two files named with numbers (i.e : 22:48 179:48), note the name of those 2 files (one of them is your external-sd mount point)
Then replace the "xxx:xx" in the following script with the name of the first file :
Code:
mount -t vfat -o umask=0000 /dev/block/vold/xxx:xx /storage/sdcard0
mount -o bind /data/media /storage/sdcard1
Save this script in a file called ext2sd1.sh and use Script Manager to run it "as root" and "at boot", now reboot and go to settings/storage : if the first file was your extsd mount point your internal and external storage should now be swapped (i.e : if you have a 64gb external sdcard the settings will show : internal storage : 64gb, and you can actually install 64gb of apps).
If it didn't work, replace the xxx:xx in the script with the name of the second file, then it should work.
Good luck guys, this superbrick is a damn pain in the ass, we can thank sammy for it
Click to expand...
Click to collapse
hey dude it's my first post in xda
i've succeded to unbrick my device but my internal memory is shrink a lot into 700+ mb but i don't understand how to use the script so
can u explain step by step ?
one can help me ??
hai everybody.... i'm from indonesia.., my friend just give me samsung galaxy tab 7 plus... ( GT-P6200 ) without any boxes, last day i try to get ICS update from kies , but the application won't update my firmware , so i try the alternative direction.
i try another application - Odin3-v1.85 and download the firmware..., but the fact is after few second running it self , the prosess can't continues get fail after
Note : i;m using : P6200OXALQ1_P6200XXLQ1_P6200XXLQ1_HOME.tar.md5 firmware
<ID:0/017> Firmware update start..
<ID:0/017> cache.img
<ID:0/017> NAND Write Start!!
<ID:0/017> factoryfs.img
<ID:0/017> hidden.img
<ID:0/017> recovery.img
<ID:0/017> Sbl.bin
<ID:0/017>
<ID:0/017> Complete(Write) operation failed. >>> FAIL...
anyone can help me .... please
I have an N8013 and I have been trying to go to 4.3 for a while. Like illusion rom... i've tried cwm a few versions even the latest, twrp, and even philz recovery as recommended and I even deleted the updater scripts as recommended. I for the life of me can not get past the zip file failing to flash. I've downloaded the rom multiple times, used odin to go back to completely stock, factory reset.... just about everything. There is one other dude tellin me to do this....
"I have a N8013, and deleting the assert and getprops works for me 100% of the time. However, it is important to note, two things. One you have to have the N8013 version of the ROM, which is labeled N80xx, and 2, when you go to install it after you have modified the file, you will get a validation error because the zip file will no longer match the MD5 validation, you have to install anyways. Other than that it works fine on my N8013, using CWM 6.0.3.1, running official CM 10.2."
But I dont know exactly what file he is talkin about. If ANYONE can help me out with this id be forever grateful.
First thing first. I'm guessing from what you don't understand is the MD5 validation.
So let me try to explain it. Doing an MD5 check, is basically checking the fingerprint of a file to the fingerprint posted. You get an MD5 sum by running it though a MD5 hashing program. Someone that knows the terms better then me will probably jump in and correct my terminology. But the best way of saying it is that by comparing MD5 sums, you are able to see if a file is unaltered.
Second, you'll want to make sure the file you download is compete and uncorrupted. So you run it though the hasher, and get the MD5 sum to check it against the posted numbers.
For "Illusion-v2.5.alpha-UNOFFICIAL-n8013.z" the MD5 Sum is: 95eb24cadc1a7721934a508e3ce97212
For "Illusion-v2.5.alpha-UNOFFICIAL-n8000.zip" the MD5 Sum is: 7789f71ca54647b43c352837702795a3
Now as for a hashing program, if you are on Windows, I would suggest a program called HashTab. http://implbits.com/
It puts the hashing into a tab so you can just right click the file, click Properties, and then "File Hashes"
So for the next thing that you need to do to make sure everything is good, is to check the MD5 sum of the file you download (unmodified) and make sure it is a good download. If all of that is good, then something else is going off.
I will note that right now I'm running the n8000 version on my n8013. Yes there are reasons I do that, even though the GSM hardware isn't in place. But using the n8000 version makes use of VoIP phones much easier.
Niscandia said:
First thing first. I'm guessing from what you don't understand is the MD5 validation.
So let me try to explain it. Doing an MD5 check, is basically checking the fingerprint of a file to the fingerprint posted. You get an MD5 sum by running it though a MD5 hashing program. Someone that knows the terms better then me will probably jump in and correct my terminology. But the best way of saying it is that by comparing MD5 sums, you are able to see if a file is unaltered.
Second, you'll want to make sure the file you download is compete and uncorrupted. So you run it though the hasher, and get the MD5 sum to check it against the posted numbers.
For "Illusion-v2.5.alpha-UNOFFICIAL-n8013.z" the MD5 Sum is: 95eb24cadc1a7721934a508e3ce97212
For "Illusion-v2.5.alpha-UNOFFICIAL-n8000.zip" the MD5 Sum is: 7789f71ca54647b43c352837702795a3
Now as for a hashing program, if you are on Windows, I would suggest a program called HashTab. http://implbits.com/
It puts the hashing into a tab so you can just right click the file, click Properties, and then "File Hashes"
So for the next thing that you need to do to make sure everything is good, is to check the MD5 sum of the file you download (unmodified) and make sure it is a good download. If all of that is good, then something else is going off.
I will note that right now I'm running the n8000 version on my n8013. Yes there are reasons I do that, even though the GSM hardware isn't in place. But using the n8000 version makes use of VoIP phones much easier.
Click to expand...
Click to collapse
Wow, thank you sir. No one has ever explained it to me like you did. I honestly appreciate it. I have a PC running windows 7 and I also have an iMac for my music. Not saying I completely understand how to do what your telling me but it puts in to a much greater perspective and for that, thank you. I know something is going wrong. This isn't my first rodeo but I definitely don't know how to change stuff around or dissect it yet. I started rooting and modifying about a year ago. Im a tech so in interests me. But I don't all that much time to dissect yet or understand what your saying exactly. I guess I just need a good download. Maybe I'll try the N8000 version instead. I don't care about the GPS and I use VOIP a lot more than I would GPS. I'll try that I guess. But thank you for the great response and for taking a moment to help a fellow androidian out.
Thought:
Could it be that im downloading the rom to my iMac, transferring to my pc via flash drive thats corrupting it somehow? I dont have hemidal or samsung drivers on my imac but it seems to download the files faster thats why im doing that. But when it finishes its a folder not a .zip so I transfer it to my pc and compress it with 7zip.
I think other people are getting the same error tho as well so maybe not..
RussellEstridge25 said:
Wow, thank you sir. No one has ever explained it to me like you did. I honestly appreciate it. I have a PC running windows 7 and I also have an iMac for my music. Not saying I completely understand how to do what your telling me but it puts in to a much greater perspective and for that, thank you. I know something is going wrong. This isn't my first rodeo but I definitely don't know how to change stuff around or dissect it yet. I started rooting and modifying about a year ago. Im a tech so in interests me. But I don't all that much time to dissect yet or understand what your saying exactly. I guess I just need a good download. Maybe I'll try the N8000 version instead. I don't care about the GPS and I use VOIP a lot more than I would GPS. I'll try that I guess. But thank you for the great response and for taking a moment to help a fellow androidian out.
Click to expand...
Click to collapse
Well to start, would be to download the Hashtab program and install it. That gives you easy access to the MD5 sums that you'll need so you can verify downloads.
Now on your Mac, I can only tell you how to do it from the command line. Open up a terminal window and type in without the quotes "md5 filename" replacing filename with the file you want the MD5 sum for.
Hashtab is a nice user friendly version, but it is a 3rd party program. Some people don't like those. So your choice there.
I can also tell you of the only real problem I have had so far with the Illusion Rom. Bluetooth Tethering doesn't work. Now what I mean by this is using Bluetooth on a Cell Phone to give Data to the Note is problematic. DHCP doesn't work til launched manually, and DNS servers don't work. So as long as you don't use Bluetooth Tethering for your Note you'll be fine. But if you use Bluetooth tethering ( a small group of people I know) might not want to upgrade quite yet.
RussellEstridge25 said:
Could it be that im downloading the rom to my iMac, transferring to my pc via flash drive thats corrupting it somehow? I dont have hemidal or samsung drivers on my imac but it seems to download the files faster thats why im doing that. But when it finishes its a folder not a .zip so I transfer it to my pc and compress it with 7zip.
I think other people are getting the same error tho as well so maybe not..
Click to expand...
Click to collapse
Now this explains the entire problem... Your Mac is unzipping the file, and probably destroying some of the symbolic links. Rezipping it still leaves the broken links and causes problems. I don't remember how to tell OSX (Mac) not to auto unzip files. But you'll need to do that or download it on your PC.
Niscandia said:
Well to start, would be to download the Hashtab program and install it. That gives you easy access to the MD5 sums that you'll need so you can verify downloads.
Now on your Mac, I can only tell you how to do it from the command line. Open up a terminal window and type in without the quotes "md5 filename" replacing filename with the file you want the MD5 sum for.
Hashtab is a nice user friendly version, but it is a 3rd party program. Some people don't like those. So your choice there.
I can also tell you of the only real problem I have had so far with the Illusion Rom. Bluetooth Tethering doesn't work. Now what I mean by this is using Bluetooth on a Cell Phone to give Data to the Note is problematic. DHCP doesn't work til launched manually, and DNS servers don't work. So as long as you don't use Bluetooth Tethering for your Note you'll be fine. But if you use Bluetooth tethering ( a small group of people I know) might not want to upgrade quite yet.
Now this explains the entire problem... Your Mac is unzipping the file, and probably destroying some of the symbolic links. Rezipping it still leaves the broken links and causes problems. I don't remember how to tell OSX (Mac) not to auto unzip files. But you'll need to do that or download it on your PC.
Click to expand...
Click to collapse
Dont you mean how to tell a mac how to autozip the files? But again thank you. That helps a lot.
RussellEstridge25 said:
Dont you mean how to tell a mac how to autozip the files? But again thank you. That helps a lot.
Click to expand...
Click to collapse
From how it sounds your Mac is auto-unzipping. You want the Mac to leave the downloaded zip file & leave it alone. Not to unzip & rezip it up. That is what is causing trouble, the unzipping and rezipping more then likely. So disable the "expand archives". Doing a quick search try reading up on it here to get Safari to behave. https://discussions.apple.com/thread/1483114?start=0&tstart=0
Niscandia said:
From how it sounds your Mac is auto-unzipping. You want the Mac to leave the downloaded zip file & leave it alone. Not to unzip & rezip it up. That is what is causing trouble, the unzipping and rezipping more then likely. So disable the "expand archives". Doing a quick search try reading up on it here to get Safari to behave. https://discussions.apple.com/thread/1483114?start=0&tstart=0
Click to expand...
Click to collapse
Thank you thank you thank you. You answered me exactly the way I needed to hear it. :good:
RussellEstridge25 said:
Thank you thank you thank you. You answered me exactly the way I needed to hear it. :good:
Click to expand...
Click to collapse
Just needed that key piece of info. That you where rezipping the file after using your Mac to download it.
Hope it installs this time around. But I would suggest learning how to check the MD5 sums as well. Doesn't hurt to be careful.
Niscandia said:
Just needed that key piece of info. That you where rezipping the file after using your Mac to download it.
Hope it installs this time around. But I would suggest learning how to check the MD5 sums as well. Doesn't hurt to be careful.
Click to expand...
Click to collapse
I completely agree. And I plan to. Didnt know it would be that easy. Again thanks man. But you completely helped me understand. I love learning about this when there is someone willing to teach.
I just downloaded the rom on my pc and its doing what it was before. I try putting the zip file in to my internal sd on my tablet and it says "CAN NOT COPY ITEM, The device has either stopped responding or has been disconnected"
It has not I can assure you. I've tried rebooting the tablet and pc when this happened before and still with no avail. I can copy other files to my tablet no problem. I've never ran into this before.
I cant even open the zip file or extract it to my desktop right now. Seriously, what the hell.
says windows cant open it cause the file is invalid. Must be that MD5 thing your tellin me to do. So now That im doing it on my windows pc should I install that program you mentioned?
RussellEstridge25 said:
I just downloaded the rom on my pc and its doing what it was before. I try putting the zip file in to my internal sd on my tablet and it says "CAN NOT COPY ITEM, The device has either stopped responding or has been disconnected"
It has not I can assure you. I've tried rebooting the tablet and pc when this happened before and still with no avail. I can copy other files to my tablet no problem. I've never ran into this before.
I cant even open the zip file or extract it to my desktop right now. Seriously, what the hell.
says windows cant open it cause the file is invalid. Must be that MD5 thing your tellin me to do. So now That im doing it on my windows pc should I install that program you mentioned?
Click to expand...
Click to collapse
I've had that problem before with windows. Not sure exactly what causes it, my guess is some data on the usb connection is causing it. Wrong driver or something.
When it happens changing USB ports, sometimes helps. Or you can use ADB to copy the file over. Not sure if you have used ADB before or not. The third way is to pull the Micro SD card out of your Note, and use an adapter (SD to USB) to put the file directly onto it from windows.
Only options I can think of off the top of my head for that problem. But it is one I've seen before.
Niscandia said:
I've had that problem before with windows. Not sure exactly what causes it, my guess is some data on the usb connection is causing it. Wrong driver or something.
When it happens changing USB ports, sometimes helps. Or you can use ADB to copy the file over. Not sure if you have used ADB before or not. The third way is to pull the Micro SD card out of your Note, and use an adapter (SD to USB) to put the file directly onto it from windows.
Only options I can think of off the top of my head for that problem. But it is one I've seen before.
Click to expand...
Click to collapse
Great ideas! I can try the sd one tomorrow. Day 3 lol. Wish Me luck
I may have missed this part, so I apologize. Is there any reason you can't just download it directly from the tablet, saving it to the sd card? It would assuredly cut down on the headache and potential file corruption during transfer between devices.
spycedtx said:
I may have missed this part, so I apologize. Is there any reason you can't just download it directly from the tablet, saving it to the sd card? It would assuredly cut down on the headache and potential file corruption during transfer between devices.
Click to expand...
Click to collapse
Already got cm10.3 up and running. The developer gave me a nightly build that had all the files taken out already. Had to download it twice but got it after putting it on my internal memory. Thank you for your help. The note 10.1 has a good community of people.
I managed to pull some files together including the .pit file from my now working tablet and make a fully working 4 file firmware and combo (all in one) firmware that CAN be flashed with Odin. I have tested it on my device and it does work. Since I know people are searching EVERYWHERE for this, I have released a download link for these files below.
Please, feel free to re-post this anywhere, just be sure to credit me.
DISCLAIMER (Obviously): I WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE AFTER FLASHING. KEEP IN MIND THAT ANYTHING CAN GO WRONG, EVEN IF YOU'RE FLASHING FIRMWARE THAT IS MADE FOR YOUR DEVICE. THE FIRMWARE AVAILABLE BELOW HAS NOT BEEN MODIFIED, ENGINEERED, OR EDITED IN ANY WAY TO CHANGE THE FUNCTIONALITY OF YOUR DEVICE. IF YOUR DEVICE BRICKS AFTER FLASHING, IT'S ALL ON YOU.
Flashing instructions:
But first, the requirements:
1) SM-T337A, Obviously, but seriously, I can't stress how important it is that you check that your model number is matched with the model number in this thread before flashing anything.
2) A Windows pc (NOT A VIRTUAL MACHINE! Using a VM to flash your device has a high chance to hard-brick your tab, and make sure your computer is running Windows XP or newer.)
3) Your device's USB transfer/charging cable
4) A Brain (Obviously)
Now then, the actual steps (4 File Firmware):
1) Boot your tab into download mode (Shut the device down completely, then hold down the power, volume down, and home button at the same time until a warning message appears)
2) Download and open Odin on your pc
3) Grab the USB charging cable and plug your tab into your pc
4) If Odin does not show your device in the list (It will display an "Added" message if the device is detected) download the Samsung USB Drivers for Mobile Phones and install it to your pc. You may need to/and it is recommended to restart your computer after installing the drivers.
5) Extract the zip file you downloaded containing the firmware to your desktop or a memorable place on your computer.
6) If you wish to wipe your data and start from scratch, click on the 'PIT' tab and select the .pit file in the extracted folder. Then, click the 'OPTIONS' tab and select 'Re-Partition' and 'NAND Erase All'.
7) Insert the firmware files into Odin. Within Odin, for instance, Click on the 'BL' button, which is where the bootloader file goes. Select the extracted package that has 'BL' at the beginning, and vice versa.
Example:
BL: *directory*/BL_T337AUCU2BOH4...
AP: *directory*/AP_T337AUCU2BOH4...
CP: *directory*/CP_T337AUCU2BOH4...
CSC: *directory*/CSC_ ATT_T337AUCU2BOH4...
8) Once done, verify that you have correctly done all the steps above, click 'Start' in Odin and wait for Odin to output a "PASS" message before unplugging anything.
9) If you wish to flash the firmware, but keep your data, make sure that there is no .pit file in Odin, make sure that 'Re-Partition' and 'NAND Erase All' are unchecked, and make sure that there is no file inserted under the 'CSC' row.
Tutorial (Combo Firmware)
1) Boot your tab into download mode (Shut the device down completely, then hold down the power, volume down, and home button at the same time until a warning message appears)
2) Download and open Odin on your pc
3) Grab the USB charging cable and plug your tab into your pc
4) If Odin does not show your device in the list (It will display an "Added" message if the device is detected) download the Samsung USB Drivers for Mobile Phones and install it to your pc. You may need to/and it is recommended to restart your computer after installing the drivers.
5) Extract the zip file you downloaded containing the firmware to your desktop or a memorable place on your computer.
6) Within Odin, Select 'AP' and browse to the directory where you extracted the firmware, and select the .tar package in the directory. There should be nothing else under the other tabs, only 'AP' should have a firmware package in it.
7) Flashing this package (unless you perform the "Developers Tip" at the end of this thread) will wipe all of your data, so be sure that the proper .pit file that came with the firmware package is selected under the 'PIT' tab in Odin and make sure that 'Re-Partition' and 'NAND Erase All' are checked in Odin to ensure a complete wipe of all personal data on the device. If you perform the developers tip at the end of the thread, simply insert the new package you created under 'AP', make sure there is no .pit file under the PIT slot, and make sure that 'Re-Partition' and 'NAND Erase All' are unchecked in Odin.
8) Once done, verify that everything is set and ready-to-go, then click 'Start' and wait for Odin to output a "PASS" message before unplugging anything.
9) Enjoy!
WARNING: If you are seeing sites that charge you money for the files, DO NOT BUY IT. They are scams and I HIGHLY SUGGEST AVOIDING THESE SITES. I didn't have to buy anything. If you do buy the firmware from these scam sites, and your device becomes bricked or messed up in some way, don't say I didn't warn you.
4 File Firmware Download: https://mega.nz/#!n8Q3VIIS!OComhygeI5SL5R6n0EXEfiYMBtVn_aOAIcUuLgmYs-k
Combo Firmware Download: https://mega.nz/#!69oEwbBR!vBtHQnrdwAfdZB3iPeGb99Yp7W79efTQr7t6FZXrzIo
Odin 3.12 Download: https://mega.nz/#!KsZiHKTb!aEHdQgO7JAQeUwdJWqS0xoR3lyJH4ieJ6qTbVKce8Zk
If the link doesn't work or goes down for some reason or if you were confused by my instructions in any way, please let me know.
Developers Tip: If you want to flash firmware without wiping your data, make sure there is no pit file selected under the PIT tab in Odin, then extract your firmware package (extract everything into a separate folder for combo firmware, extract the CSC package for 4 file downloads) and remove cache.img.ext4 then repack as a .tar file. Applies to both combo and 4 file firmware packages. In 4 file packages, cache.img.ext4 is in the CSC file. However, in some cases this may put your device in a bootloop. If you wish to do this on an older device and the cache file doesn't have the .ext4 extension at the end, don't worry, it'll work the same way.
Now that you have the firmware, WHY NOT ROOT IT? Check out my thread on how to do so here: https://forum.xda-developers.com/tab-4/general/root-how-to-root-sm-t337a-supersu-t3553848
Cheers!
Does anyone know the process for extracting the files like this from an OTA update? I have some files I would like to extract from another OTA. Thank you
Sent from my SAMSUNG-SM-N910A using XDA-Developers Legacy app
dkmac said:
Does anyone know the process for extracting the files like this from an OTA update? I have some files I would like to extract from another OTA. Thank you
Sent from my SAMSUNG-SM-N910A using XDA-Developers Legacy app
Click to expand...
Click to collapse
I'll be honest and say its not easy. Making this firmware took me about 3 months. OTA update files are very different from actual Odin firmware files. If you want to extract the files from an OTA update, I just used 7Zip and went from there.
Lollipop 5.1.1 Root for SM-T337A
@KingOfTheNet - Great stuff. There are definitely some shady sites out there offering firmware for the T337A so thank you.
Not to be greedy but any recommendations on rooting 5.1.1 on SM-T337A. I am trying to remove all of the Samsung and AT&T bloatware and get my Tab 4 running lean and mean. I am pretty sure I went with your firmware - my build number is listed as LMY47X.T337AUC2BOH4.
Appreciate the support.
18Echo said:
@KingOfTheNet - Great stuff. There are definitely some shady sites out there offering firmware for the T337A so thank you.
Not to be greedy but any recommendations on rooting 5.1.1 on SM-T337A. I am trying to remove all of the Samsung and AT&T bloatware and get my Tab 4 running lean and mean. I am pretty sure I went with your firmware - my build number is listed as LMY47X.T337AUC2BOH4.
Appreciate the support.
Click to expand...
Click to collapse
Your welcome bro, happy to help! I have actually rooted my tab with SuperSU, fully working. The only thing is its temporary, and I avoid rebooting or shutting the device down at all because it's a system-less SuperSU (meaning temporary). I'll make a thread on how to achieve root on this tab later tomorrow when I get home from work, unless someone replies to this before I do (It's late where I'm at).
Cheers!
18Echo said:
@KingOfTheNet - Great stuff. There are definitely some shady sites out there offering firmware for the T337A so thank you.
Not to be greedy but any recommendations on rooting 5.1.1 on SM-T337A. I am trying to remove all of the Samsung and AT&T bloatware and get my Tab 4 running lean and mean. I am pretty sure I went with your firmware - my build number is listed as LMY47X.T337AUC2BOH4.
Appreciate the support.
Click to expand...
Click to collapse
Just made a thread for it here: https://forum.xda-developers.com/tab-4/general/root-how-to-root-sm-t337a-supersu-t3553848
Cheers!
Hello! ... First of all, thank you for all your hard work! But unfortunately that firmware does not seem to work for me. I'm a little newbie, so I'd appreciate if someone could explain the steps to follow specifically with Odin, as a tutorial or something ... so that I can distinguish what I'm doing wrong.
I uploaded a short video so you can see what I mean... If you could take the time to watch it and tell me what I'm doing wrong, that would be awesome.
Here it is: youtu.be/9JsLVJ-xHMA (I cannot post direct link since I'm new user)
I've downloaded some files with name ATT_T337AUCU2BOH4_T337AATT2BOH4.zip (1.19gb) put by poorusernamebychoice and their tar.md5 file is gone 404.
Now i need some help here, this zip contains:
AP_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
BL_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
CP_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
CSC_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
MILLETLTE_USA_ATT.pit
This is big file so now I'm stuck what to do or i start a fresh download from above links.
Sent from my SAMSUNG-SM-T337A using Tapatalk
darkcrazy75 said:
Hello! ... First of all, thank you for all your hard work! But unfortunately that firmware does not seem to work for me. I'm a little newbie, so I'd appreciate if someone could explain the steps to follow specifically with Odin, as a tutorial or something ... so that I can distinguish what I'm doing wrong.
I uploaded a short video so you can see what I mean... If you could take the time to watch it and tell me what I'm doing wrong, that would be awesome.
Here it is: youtu.be/9JsLVJ-xHMA (I cannot post direct link since I'm new user)
Click to expand...
Click to collapse
Sorry for the late responce, my internet has been down for a while now (2 weeks). I'll watch the video later today and edit this post with an explainatio n.
_SAM11_ said:
I've downloaded some files with name ATT_T337AUCU2BOH4_T337AATT2BOH4.zip (1.19gb) put by poorusernamebychoice and their tar.md5 file is gone 404.
Now i need some help here, this zip contains:
AP_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
BL_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
CP_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
CSC_T337AUCU2BOH4_T337AATT2BOH4_HOME.tar
MILLETLTE_USA_ATT.pit
This is big file so now I'm stuck what to do or i start a fresh download from above links.
Click to expand...
Click to collapse
Do you mean you need to re-download the files or you need help with flashing them? Dl links are at the middle of the thread.
KingOfTheNet said:
Do you mean you need to re-download the files or you need help with flashing them? Dl links are at the middle of the thread.
Click to expand...
Click to collapse
I hve these files i wrote above. So if they're working, i just need procedure
Sent from my SAMSUNG-SM-T337A using Tapatalk
_SAM11_ said:
I hve these files i wrote above. So if they're working, i just need procedure
Sent from my SAMSUNG-SM-T337A using Tapatalk
Click to expand...
Click to collapse
It's actually very easy, that's why I didn't put any instructions in the thread, I just assumed people knew how to do it by now. But I'm happy to provide instructions to those people who don't know how. Instead of posting said instructions right here, I'll update the thread with instructions.
Cheers!
KingOfTheNet said:
It's actually very easy, that's why I didn't put any instructions in the thread, I just assumed people knew how to do it by now. But I'm happy to provide instructions to those people who don't know how. Instead of posting said instructions right here, I'll update the thread with instructions.
Cheers!
Click to expand...
Click to collapse
That means alot after my last reply, i had been trying to flash with odin but i dnt kno why tablet isn't connecting laptop while other phones are. Not evn on media mode. So I'm downloading ota update.zip
Sent from my SAMSUNG-SM-T337A using Tapatalk
_SAM11_ said:
That means alot after my last reply, i had been trying to flash with odin but i dnt kno why tablet isn't connecting laptop while other phones are. Not evn on media mode. So I'm downloading ota update.zip
Sent from my SAMSUNG-SM-T337A using Tapatalk
Click to expand...
Click to collapse
This might take me a while, I can't edit the thread (kinda odd). I've gotta talk to admin about it but I'll try to get instructions up for ya asap (unless someone replies to you with instructions before I do).
Update: I managed updating to 5.1.1 update. Now i just need January update and root the device. I just need January zip update ota if u can manage me getting that please
Sent from my SAMSUNG-SM-T337A using Tapatalk
_SAM11_ said:
Update: I managed updating to 5.1.1 update. Now i just need January update and root the device. I just need January zip update ota if u can manage me getting that please
Sent from my SAMSUNG-SM-T337A using Tapatalk
Click to expand...
Click to collapse
I believe I have the file stored somewhere on my hard drive, I'll look and pm you a link if I can find it.
Cheers!
KingOfTheNet said:
I believe I have the file stored somewhere on my hard drive, I'll look and pm you a link if I can find it.
Cheers!
Click to expand...
Click to collapse
Sure Thanks for much help
Sent from my SAMSUNG-SM-T337A using Tapatalk
Guys no lollipop update for tab4 t230 ?
tab4map4 said:
Guys no lollipop update for tab4 t230 ?
Click to expand...
Click to collapse
No, this thread is for the Tab 4 8.0 AT&T. Please make sure you consult the relevant forums for your device model as doing anything meant to be done on different devices can be catastrophic.
Cheers!
_SAM11_ said:
Sure Thanks for much help
Sent from my SAMSUNG-SM-T337A using Tapatalk
Click to expand...
Click to collapse
Finally got the instructions up. You can check the very beginning of the thread for instructions on flashing. Just remember, I will not be held responsible if your device is bricked after the matter.
Cheers!
May 05 2018 - Sprint Samsung Galaxy S7 Edge ODIN firmware G935PVPU6BRD2.
This is the 100% stock firmware for your G935P. I tested these files last night,
and uploaded them to Mega. Please feel free to post these on another file
host, as I am sure my mega.nz will be overloaded if more people want or need
these. No credit is needed, as all I did was locate the flash files and archive them.
As per the usual disclaimer, I make no guarantees with these files, for any particular
fitness or purpose. You use these at your own risk, and with the understanding of
the consequences of failed flashing. Neither myself, nor XDA will be held responsible
for you breaking/bricking your device, or for any other consequences from using this
in any manner.
included are the BL, AP, CL, and CSC (SPR) files,
https://mega.nz/#!D1xmnTAZ!kmRM51MYuBi7Sh5P-pjnoXoxodmu8S5v01n2mWGXivs
PS: Mods, I did not see this package posted already, if I am posting in the wrong section, please feel free to move it accordingly,
I have done my best to post this properly, but I'm just human after all. My intent is to solely be helpful to someone in a bad situation as I was last night. Thanks
Dan
BRD2
You are the only one who seems to have that file, any chances that you got or know where to find the same firmware but for SM-G930P?
Thanks!
can someone please upload it? i just soft bricked my phone sm-g935p
I think i had this update, unless there was a newer one
EDIT: sorry guess i couldn't see the file/link on mobile. thanks!
UPDATE: Tried installing an unlocked firmware on my "updated by sprint bootloader" and it soft bricked my phone. the updated bootloader doesn't allow for firmwares with a downgraDED bootloader to load. thanks a bunch for uploading this. seriously saved me a lot of grief!
moxlon69 said:
May 05 2018 - Sprint Samsung Galaxy S7 Edge ODIN firmware G935PVPU6BRD2.
This is the 100% stock firmware for your G935P. I tested these files last night,
and uploaded them to Mega. Please feel free to post these on another file
host, as I am sure my mega.nz will be overloaded if more people want or need
these. No credit is needed, as all I did was locate the flash files and archive them.
As per the usual disclaimer, I make no guarantees with these files, for any particular
fitness or purpose. You use these at your own risk, and with the understanding of
the consequences of failed flashing. Neither myself, nor XDA will be held responsible
for you breaking/bricking your device, or for any other consequences from using this
in any manner.
included are the BL, AP, CL, and CSC (SPR) files,
https://mega.nz/#!D1xmnTAZ!kmRM51MYuBi7Sh5P-pjnoXoxodmu8S5v01n2mWGXivs
PS: Mods, I did not see this package posted already, if I am posting in the wrong section, please feel free to move it accordingly,
I have done my best to post this properly, but I'm just human after all. My intent is to solely be helpful to someone in a bad situation as I was last night. Thanks
Dan
Click to expand...
Click to collapse
link is error or remove
pleass upload it agan in mega cloud
think you bro :laugh: :good: :good:
Invalid URL
The file has been deleted by the user.